ipsec: T4353: fix Jinja2 linting errors

1 files changed, 0 insertions, 115 deletions

diff --git a/data/templates/ipsec/charon/eap-radius.conf.tmpl b/data/templates/ipsec/charon/eap-radius.conf.tmpl
deleted file mode 100644
index b58022521..000000000
--- a/data/templates/ipsec/charon/eap-radius.conf.tmpl
+++ /dev/null
@@ -1,115 +0,0 @@
-eap-radius {
-    # Send RADIUS accounting information to RADIUS servers.
-    # accounting = no
-
-    # Close the IKE_SA if there is a timeout during interim RADIUS accounting
-    # updates.
-    # accounting_close_on_timeout = yes
-
-    # Interval in seconds for interim RADIUS accounting updates, if not
-    # specified by the RADIUS server in the Access-Accept message.
-    # accounting_interval = 0
-
-    # If enabled, accounting is disabled unless an IKE_SA has at least one
-    # virtual IP. Only for IKEv2, for IKEv1 a virtual IP is strictly necessary.
-    # accounting_requires_vip = no
-
-    # If enabled, adds the Class attributes received in Access-Accept message to
-    # the RADIUS accounting messages.
-    # accounting_send_class = no
-
-    # Use class attributes in Access-Accept messages as group membership
-    # information.
-    # class_group = no
-
-    # Closes all IKE_SAs if communication with the RADIUS server times out. If
-    # it is not set only the current IKE_SA is closed.
-    # close_all_on_timeout = no
-
-    # Send EAP-Start instead of EAP-Identity to start RADIUS conversation.
-    # eap_start = no
-
-    # Use filter_id attribute as group membership information.
-    # filter_id = no
-
-    # Prefix to EAP-Identity, some AAA servers use a IMSI prefix to select the
-    # EAP method.
-    # id_prefix =
-
-    # Whether to load the plugin. Can also be an integer to increase the
-    # priority of this plugin.
-    load = yes
-
-    # NAS-Identifier to include in RADIUS messages.
-    nas_identifier = {{ remote_access.radius.nas_identifier if remote_access.radius.nas_identifier is vyos_defined else 'strongSwan' }}
-
-    # Port of RADIUS server (authentication).
-    # port = 1812
-
-    # Base to use for calculating exponential back off.
-    # retransmit_base = 1.4
-
-    # Timeout in seconds before sending first retransmit.
-    # retransmit_timeout = 2.0
-
-    # Number of times to retransmit a packet before giving up.
-    # retransmit_tries = 4
-
-    # Shared secret between RADIUS and NAS. If set, make sure to adjust the
-    # permissions of the config file accordingly.
-    # secret =
-
-    # IP/Hostname of RADIUS server.
-    # server =
-
-    # Number of sockets (ports) to use, increase for high load.
-    # sockets = 1
-
-    # Whether to include the UDP port in the Called- and Calling-Station-Id
-    # RADIUS attributes.
-    # station_id_with_port = yes
-
-    dae {
-        # Enables support for the Dynamic Authorization Extension (RFC 5176).
-        # enable = no
-
-        # Address to listen for DAE messages from the RADIUS server.
-        # listen = 0.0.0.0
-
-        # Port to listen for DAE requests.
-        # port = 3799
-
-        # Shared secret used to verify/sign DAE messages. If set, make sure to
-        # adjust the permissions of the config file accordingly.
-        # secret =
-    }
-
-    forward {
-        # RADIUS attributes to be forwarded from IKEv2 to RADIUS.
-        # ike_to_radius =
-
-        # Same as ike_to_radius but from RADIUS to IKEv2.
-        # radius_to_ike =
-    }
-
-    # Section to specify multiple RADIUS servers.
-    servers {
-{%  if remote_access.radius.server is vyos_defined %}
-{%    for server, server_options in remote_access.radius.server.items() if server_options.disable is not vyos_defined %}
-        {{ server | replace('.', '-') }} {
-            address = {{ server }}
-            secret = {{ server_options.key }}
-            auth_port = {{ server_options.port }}
-{%      if server_options.disable_accounting is not vyos_defined %}
-            acct_port = {{ server_options.port | int +1 }}
-{%  endif %}
-            sockets = 20
-        }
-{%    endfor %}
-{%  endif %}
-    }
-
-    # Section to configure multiple XAuth authentication rounds via RADIUS.
-    xauth {
-    }
-}