macsec: T4353: fix Jinja2 linting errors

1 files changed, 0 insertions, 87 deletions

diff --git a/data/templates/macsec/wpa_supplicant.conf.tmpl b/data/templates/macsec/wpa_supplicant.conf.tmpl
deleted file mode 100644
index 0ac7cb860..000000000
--- a/data/templates/macsec/wpa_supplicant.conf.tmpl
+++ /dev/null
@@ -1,87 +0,0 @@
-### Autogenerated by interfaces-macsec.py ###
-
-# see full documentation:
-# https://w1.fi/cgit/hostap/plain/wpa_supplicant/wpa_supplicant.conf
-
-# For UNIX domain sockets (default on Linux and BSD): This is a directory that
-# will be created for UNIX domain sockets for listening to requests from
-# external programs (CLI/GUI, etc.) for status information and configuration.
-# The socket file will be named based on the interface name, so multiple
-# wpa_supplicant processes can be run at the same time if more than one
-# interface is used.
-# /var/run/wpa_supplicant is the recommended directory for sockets and by
-# default, wpa_cli will use it when trying to connect with wpa_supplicant.
-ctrl_interface=/run/wpa_supplicant
-
-# Note: When using MACsec, eapol_version shall be set to 3, which is
-# defined in IEEE Std 802.1X-2010.
-eapol_version=3
-
-# No need to scan for access points in MACsec mode
-ap_scan=0
-
-# EAP fast re-authentication
-fast_reauth=1
-
-network={
-    key_mgmt=NONE
-
-    # Note: When using wired authentication (including MACsec drivers),
-    # eapol_flags must be set to 0 for the authentication to be completed
-    # successfully.
-    eapol_flags=0
-
-    # macsec_policy: IEEE 802.1X/MACsec options
-    # This determines how sessions are secured with MACsec (only for MACsec
-    # drivers).
-    # 0: MACsec not in use (default)
-    # 1: MACsec enabled - Should secure, accept key server's advice to
-    #    determine whether to use a secure session or not.
-    macsec_policy=1
-
-    # macsec_integ_only: IEEE 802.1X/MACsec transmit mode
-    # This setting applies only when MACsec is in use, i.e.,
-    #  - macsec_policy is enabled
-    #  - the key server has decided to enable MACsec
-    # 0: Encrypt traffic (default)
-    # 1: Integrity only
-    macsec_integ_only={{ '0' if security.encrypt is vyos_defined else '1' }}
-
-{% if security.encrypt is vyos_defined %}
-    # mka_cak, mka_ckn, and mka_priority: IEEE 802.1X/MACsec pre-shared key mode
-    # This allows to configure MACsec with a pre-shared key using a (CAK,CKN) pair.
-    # In this mode, instances of wpa_supplicant can act as MACsec peers. The peer
-    # with lower priority will become the key server and start distributing SAKs.
-    # mka_cak (CAK = Secure Connectivity Association Key) takes a 16-byte (128-bit)
-    # hex-string (32 hex-digits) or a 32-byte (256-bit) hex-string (64 hex-digits)
-    # mka_ckn (CKN = CAK Name) takes a 1..32-bytes (8..256 bit) hex-string
-    # (2..64 hex-digits)
-    mka_cak={{ security.mka.cak }}
-    mka_ckn={{ security.mka.ckn }}
-
-    # mka_priority (Priority of MKA Actor) is in 0..255 range with 255 being
-    # default priority
-    mka_priority={{ security.mka.priority }}
-{% endif %}
-
-{% if security.replay_window is vyos_defined %}
-    # macsec_replay_protect: IEEE 802.1X/MACsec replay protection
-    # This setting applies only when MACsec is in use, i.e.,
-    #  - macsec_policy is enabled
-    #  - the key server has decided to enable MACsec
-    # 0: Replay protection disabled (default)
-    # 1: Replay protection enabled
-    macsec_replay_protect=1
-
-    # macsec_replay_window: IEEE 802.1X/MACsec replay protection window
-    # This determines a window in which replay is tolerated, to allow receipt
-    # of frames that have been misordered by the network.
-    # This setting applies only when MACsec replay protection active, i.e.,
-    #  - macsec_replay_protect is enabled
-    #  - the key server has decided to enable MACsec
-    # 0: No replay window, strict check (default)
-    # 1..2^32-1: number of packets that could be misordered
-    macsec_replay_window={{ security.replay_window }}
-{% endif %}
-}
-