pppoe: T4353: fix Jinja2 linting errors

5 files changed, 3 insertions, 154 deletions

diff --git a/data/templates/pppoe/ip-down.script.tmpl b/data/templates/pppoe/ip-down.script.tmpl
deleted file mode 100644
index 0be7b03c8..000000000
--- a/data/templates/pppoe/ip-down.script.tmpl
+++ /dev/null
@@ -1,38 +0,0 @@
-#!/bin/sh
-
-# As PPPoE is an "on demand" interface we need to re-configure it when it
-# becomes up
-if [ "$6" != "{{ ifname }}" ]; then
-    exit
-fi
-
-# add some info to syslog
-DIALER_PID=$(cat /var/run/{{ ifname }}.pid)
-logger -t pppd[$DIALER_PID] "executing $0"
-
-{% if connect_on_demand is not defined %}
-# See https://phabricator.vyos.net/T2248. Determine if we are enslaved to a
-# VRF, this is needed to properly insert the default route.
-VRF_NAME=""
-if [ -d /sys/class/net/{{ ifname }}/upper_* ]; then
-    # Determine upper (VRF) interface
-    VRF=$(basename $(ls -d /sys/class/net/{{ ifname }}/upper_*))
-    # Remove upper_ prefix from result string
-    VRF=${VRF#"upper_"}
-    # Populate variable to run in VR context
-    VRF_NAME="vrf ${VRF_NAME}"
-fi
-
-{%   if default_route != 'none' %}
-# Always delete default route when interface goes down if we installed it
-vtysh -c "conf t" ${VRF_NAME} -c "no ip route 0.0.0.0/0 {{ ifname }} ${VRF_NAME}"
-{%      if ipv6.address.autoconf is vyos_defined %}
-vtysh -c "conf t" ${VRF_NAME} -c "no ipv6 route ::/0 {{ ifname }} ${VRF_NAME}"
-{%      endif %}
-{%   endif %}
-{% endif %}
-
-{% if dhcpv6_options.pd is vyos_defined %}
-# Stop wide dhcpv6 client
-systemctl stop dhcp6c@{{ ifname }}.service
-{% endif %}
diff --git a/data/templates/pppoe/ip-pre-up.script.tmpl b/data/templates/pppoe/ip-pre-up.script.tmpl
deleted file mode 100644
index a54e4e9bd..000000000
--- a/data/templates/pppoe/ip-pre-up.script.tmpl
+++ /dev/null
@@ -1,18 +0,0 @@
-#!/bin/sh
-
-# As PPPoE is an "on demand" interface we need to re-configure it when it
-# becomes up
-if [ "$6" != "{{ ifname }}" ]; then
-    exit
-fi
-
-# add some info to syslog
-DIALER_PID=$(cat /var/run/{{ ifname }}.pid)
-logger -t pppd[$DIALER_PID] "executing $0"
-
-echo "{{ description }}" > /sys/class/net/{{ ifname }}/ifalias
-
-{% if vrf %}
-logger -t pppd[$DIALER_PID] "configuring dialer interface $6 for VRF {{ vrf }}"
-ip link set dev {{ ifname }} master {{ vrf }}
-{% endif %}
diff --git a/data/templates/pppoe/ip-up.script.tmpl b/data/templates/pppoe/ip-up.script.tmpl
deleted file mode 100644
index 302756960..000000000
--- a/data/templates/pppoe/ip-up.script.tmpl
+++ /dev/null
@@ -1,49 +0,0 @@
-#!/bin/sh
-
-# As PPPoE is an "on demand" interface we need to re-configure it when it
-# becomes up
-if [ "$6" != "{{ ifname }}" ]; then
-    exit
-fi
-
-{% if connect_on_demand is not defined %}
-# add some info to syslog
-DIALER_PID=$(cat /var/run/{{ ifname }}.pid)
-logger -t pppd[$DIALER_PID] "executing $0"
-
-{%   if default_route != 'none' %}
-# See https://phabricator.vyos.net/T2248 & T2220. Determine if we are enslaved
-# to a VRF, this is needed to properly insert the default route.
-
-SED_OPT="^ip route"
-VRF_NAME=""
-if [ -d /sys/class/net/{{ ifname }}/upper_* ]; then
-    # Determine upper (VRF) interface
-    VRF=$(basename $(ls -d /sys/class/net/{{ ifname }}/upper_*))
-    # Remove upper_ prefix from result string
-    VRF=${VRF#"upper_"}
-    # generate new SED command
-    SED_OPT="vrf ${VRF}"
-    # generate vtysh option
-    VRF_NAME="vrf ${VRF}"
-fi
-
-{%     if default_route == 'auto' %}
-# Only insert a new default route if there is no default route configured
-routes=$(vtysh -c "show running-config" | sed -n "/${SED_OPT}/,/!/p" | grep 0.0.0.0/0 | wc -l)
-if [ "$routes" -ne 0 ]; then
-    exit 1
-fi
-
-{%     elif default_route == 'force' %}
-# Retrieve current static default routes and remove it from the routing table
-vtysh -c "show running-config" | sed -n "/${SED_OPT}/,/!/p" | grep 0.0.0.0/0 | while read route ; do
-    vtysh -c "conf t" ${VTY_OPT} -c "no ${route} ${VRF_NAME}"
-done
-{%     endif %}
-
-# Add default route to default or VRF routing table
-vtysh -c "conf t" ${VTY_OPT} -c "ip route 0.0.0.0/0 {{ ifname }} ${VRF_NAME}"
-logger -t pppd[$DIALER_PID] "added default route via {{ ifname }} ${VRF_NAME}"
-{%   endif %}
-{% endif %}
diff --git a/data/templates/pppoe/ipv6-up.script.tmpl b/data/templates/pppoe/ipv6-up.script.tmpl
deleted file mode 100644
index da73cb4d5..000000000
--- a/data/templates/pppoe/ipv6-up.script.tmpl
+++ /dev/null
@@ -1,46 +0,0 @@
-#!/bin/sh
-
-# As PPPoE is an "on demand" interface we need to re-configure it when it
-# becomes up
-
-if [ "$6" != "{{ ifname }}" ]; then
-    exit
-fi
-
-
-{% if default_route != 'none' %}
-# See https://phabricator.vyos.net/T2248 & T2220. Determine if we are enslaved
-# to a VRF, this is needed to properly insert the default route.
-
-SED_OPT="^ipv6 route"
-VRF_NAME=""
-if [ -d /sys/class/net/{{ ifname }}/upper_* ]; then
-    # Determine upper (VRF) interface
-    VRF=$(basename $(ls -d /sys/class/net/{{ ifname }}/upper_*))
-    # Remove upper_ prefix from result string
-    VRF=${VRF#"upper_"}
-    # generate new SED command
-    SED_OPT="vrf ${VRF}"
-    # generate vtysh option
-    VRF_NAME="vrf ${VRF}"
-fi
-
-{%   if default_route == 'auto' %}
-# Only insert a new default route if there is no default route configured
-routes=$(vtysh -c "show running-config" | sed -n "/${SED_OPT}/,/!/p" | grep ::/0 | wc -l)
-if [ "$routes" -ne 0 ]; then
-    exit 1
-fi
-
-{%   elif default_route == 'force' %}
-# Retrieve current static default routes and remove it from the routing table
-vtysh -c "show running-config" | sed -n "/${SED_OPT}/,/!/p" | grep ::/0 | while read route ; do
-    vtysh -c "conf t" ${VTY_OPT} -c "no ${route} ${VRF_NAME}"
-done
-{%   endif %}
-
-# Add default route to default or VRF routing table
-vtysh -c "conf t" ${VTY_OPT} -c "ipv6 route ::/0 {{ ifname }} ${VRF_NAME}"
-logger -t pppd[$DIALER_PID] "added default route via {{ ifname }} ${VRF_NAME}"
-{% endif %}
-
diff --git a/data/templates/pppoe/peer.tmpl b/data/templates/pppoe/peer.j2
index d6d63debf..6221abb9b 100644
--- a/data/templates/pppoe/peer.tmpl
+++ b/data/templates/pppoe/peer.j2
@@ -67,14 +67,14 @@ demand
 # See T2249. PPP default route options should only be set when in on-demand
 # mode. As soon as we are not in on-demand mode the default-route handling is
 # passed to the ip-up.d/ip-down.s scripts which is required for VRF support.
-{%   if 'auto' in default_route %}
+{%     if 'auto' in default_route %}
 defaultroute
 {{ 'defaultroute6' if ipv6 is vyos_defined }}
-{%   elif 'force' in default_route %}
+{%     elif 'force' in default_route %}
 defaultroute
 replacedefaultroute
 {{ 'defaultroute6' if ipv6 is vyos_defined }}
-{%   endif %}
+{%     endif %}
 {% else %}
 nodefaultroute
 noreplacedefaultroute