console: T2529: migrate from ttyUSB device to new device in /dev/serial/by-bus

During testing it was discovered that there is a well known problem (we had for
ethernet interfaces) also in the serial port world. They will be enumerated and
mapped to /dev/ttyUSBxxx differently from boot to boot. This is especially
painful on my development APU4 board which also has a Sierra Wireless MC7710
LTE module installed.

The serial port will toggle between ttyUSB2 and ttyUSB5 depending on the
amount of serial port extenders attached (FT4232H).

The shipped udev rule (/usr/lib/udev/rules.d/60-serial.rules) partly solves
this by enumerating the devices into /dev/serial/by-id folder with their name
and serial number - it's a very good idea but I've found that not all of the
FT4232H dongles have a serial number programmed - this leads to the situation
that when you plug in two cables with both having serial number 0 - only one
device symlink will appear - the previous one is always overwritten by the
latter one.

Derive /usr/lib/udev/rules.d/60-serial.rules and create a /dev/serial/by-bus
directory and group devices by attached USB root port.

1 files changed, 37 insertions, 0 deletions

diff --git a/data/templates/getty/serial-getty.service.tmpl b/data/templates/getty/serial-getty.service.tmpl
new file mode 100644
index 000000000..0183eae7d
--- /dev/null
+++ b/data/templates/getty/serial-getty.service.tmpl
@@ -0,0 +1,37 @@
+[Unit]
+Description=Serial Getty on %I
+Documentation=man:agetty(8) man:systemd-getty-generator(8)
+Documentation=http://0pointer.de/blog/projects/serial-console.html
+BindsTo=dev-%i.device
+After=dev-%i.device systemd-user-sessions.service plymouth-quit-wait.service getty-pre.target
+After=vyos-router.service
+
+# If additional gettys are spawned during boot then we should make
+# sure that this is synchronized before getty.target, even though
+# getty.target didn't actually pull it in.
+Before=getty.target
+IgnoreOnIsolate=yes
+
+# IgnoreOnIsolate causes issues with sulogin, if someone isolates
+# rescue.target or starts rescue.service from multi-user.target or
+# graphical.target.
+Conflicts=rescue.service
+Before=rescue.service
+
+[Service]
+# The '-o' option value tells agetty to replace 'login' arguments with an
+# option to preserve environment (-p), followed by '--' for safety, and then
+# the entered username.
+ExecStart=-/sbin/agetty -o '-p -- \\u' --keep-baud {{ speed }} %I $TERM
+Type=idle
+Restart=always
+UtmpIdentifier=%I
+TTYPath=/dev/%I
+TTYReset=yes
+TTYVHangup=yes
+KillMode=process
+IgnoreSIGPIPE=no
+SendSIGHUP=yes
+
+[Install]
+WantedBy=getty.target