wwan: T2529: migrate device from ttyUSB to usbXbY.YpZ.Z

During testing it was discovered that there is a well known problem (we had for
ethernet interfaces) also in the serial port world. They will be enumerated and
mapped to /dev/ttyUSBxxx differently from boot to boot. This is especially
painful on my development APU4 board which also has a Sierra Wireless MC7710
LTE module installed.

The serial port will toggle between ttyUSB2 and ttyUSB5 depending on the
amount of serial port extenders attached (FT4232H).

The shipped udev rule (/usr/lib/udev/rules.d/60-serial.rules) partly solves
this by enumerating the devices into /dev/serial/by-id folder with their name
and serial number - it's a very good idea but I've found that not all of the
FT4232H dongles have a serial number programmed - this leads to the situation
that when you plug in two cables with both having serial number 0 - only one
device symlink will appear - the previous one is always overwritten by the
latter one.

Derive /usr/lib/udev/rules.d/60-serial.rules and create a /dev/serial/by-bus
directory and group devices by attached USB root port.

  vyos@vyos:~$ find /dev/serial/by-bus/ -name usb* -exec basename {} \; | sort
  usb0b1.3p1.0
  usb0b1.3p1.2
  usb0b1.3p1.3
  usb0b2.4p1.0
  usb0b2.4p1.1
  usb0b2.4p1.2
  usb0b2.4p1.3

So we have USB root 0 with bus 1.3 and port 1.0. The enumeration is constant
accross reboots.

1 files changed, 1 insertions, 1 deletions

diff --git a/data/templates/wwan/peer.tmpl b/data/templates/wwan/peer.tmpl
index 04ab4f844..b8a7d10ae 100644
--- a/data/templates/wwan/peer.tmpl
+++ b/data/templates/wwan/peer.tmpl
@@ -10,7 +10,7 @@ linkname {{ intf }}
 usepeerdns
 {%- endif %}
 # physical device
-/dev/{{ device }}
+{{ device }}
 lcp-echo-failure 0
 115200
 debug