summaryrefslogtreecommitdiff
path: root/data/templates
diff options
context:
space:
mode:
authorChristian Poessinger <christian@poessinger.com>2020-04-04 13:46:38 +0200
committerChristian Poessinger <christian@poessinger.com>2020-04-04 13:46:38 +0200
commit8dcf042a7f58dfac590b28174dc1d9b87ce5a893 (patch)
tree74acfbd69639855780f9b4608d36c48002434230 /data/templates
parent926eaabc283dabc1b2db0bafbb41bc71f9766f05 (diff)
downloadvyos-1x-8dcf042a7f58dfac590b28174dc1d9b87ce5a893.tar.gz
vyos-1x-8dcf042a7f58dfac590b28174dc1d9b87ce5a893.zip
pppoe: T2219: move adding of default route to ip-(up|down) script
As PPPoE interfaces should be part of a VRF it is required that the default can also be set into the specified VRF. The default way of PPP by setting the "defaultroute" option does not take a VRF into account. In this case PPP installs a Kernel route forwarding all default traffic over this interface. This change installs a static route with metric 1 instead into the routing table via FRR. This is not the same as a Kernel route in terms of metric 1 compared to 0 but it should do the trick.
Diffstat (limited to 'data/templates')
-rw-r--r--data/templates/pppoe/ip-down.script.tmpl16
-rw-r--r--data/templates/pppoe/ip-up.script.tmpl33
-rw-r--r--data/templates/pppoe/ipv6-up.script.tmpl82
-rw-r--r--data/templates/pppoe/peer.tmpl132
4 files changed, 153 insertions, 110 deletions
diff --git a/data/templates/pppoe/ip-down.script.tmpl b/data/templates/pppoe/ip-down.script.tmpl
new file mode 100644
index 000000000..f90da02bc
--- /dev/null
+++ b/data/templates/pppoe/ip-down.script.tmpl
@@ -0,0 +1,16 @@
+#!/bin/sh
+
+# As PPPoE is an "on demand" interface we need to re-configure it when it
+# becomes up
+
+if [ "$6" != "{{ intf }}" ]; then
+ exit
+fi
+
+# add some info to syslog
+DIALER_PID=$(cat /var/run/{{ intf }}.pid)
+logger -t pppd[$DIALER_PID] "executing $0"
+
+# Debian PPP version has no support for replacing an existing default route
+# thus we emulate this ba an ip-up script https://phabricator.vyos.net/T2220.
+vtysh -c "conf t" -c "no ip route 0.0.0.0/0 {{ intf }}"
diff --git a/data/templates/pppoe/ip-up.script.tmpl b/data/templates/pppoe/ip-up.script.tmpl
new file mode 100644
index 000000000..c6aa02e9e
--- /dev/null
+++ b/data/templates/pppoe/ip-up.script.tmpl
@@ -0,0 +1,33 @@
+#!/bin/sh
+
+# As PPPoE is an "on demand" interface we need to re-configure it when it
+# becomes up
+if [ "$6" != "{{ intf }}" ]; then
+ exit
+fi
+
+# add some info to syslog
+DIALER_PID=$(cat /var/run/{{ intf }}.pid)
+logger -t pppd[$DIALER_PID] "executing $0"
+
+# Debian PPP version has no support for replacing an existing default route
+# thus we emulate this ba an ip-up script https://phabricator.vyos.net/T2220.
+
+{% if 'auto' in default_route -%}
+
+# only insert a new default route if there is no default route configured
+routes=$(vtysh -c "show running-config" | sed -n "/ip route/,/!/p" | grep 0.0.0.0/0 | wc -l)
+if [ "$routes" -eq 0 ]; then
+ # No VRF, use default routing table
+ vtysh -c "conf t" -c "ip route 0.0.0.0/0 {{ intf }}"
+fi
+
+{% elif 'force' in default_route -%}
+
+# Retrieve current static default routes and remove it from the routing table
+vtysh -c "show running-config" | sed -n "/ip route/,/!/p" | grep 0.0.0.0/0 | while read route ; do
+ vtysh -c "conf t" -c "no ${route}"
+done
+# No VRF, use default routing table
+vtysh -c "conf t" -c "ip route 0.0.0.0/0 {{ intf }}"
+{% endif %}
diff --git a/data/templates/pppoe/ipv6-up.script.tmpl b/data/templates/pppoe/ipv6-up.script.tmpl
index 037db66db..a4b08ddaf 100644
--- a/data/templates/pppoe/ipv6-up.script.tmpl
+++ b/data/templates/pppoe/ipv6-up.script.tmpl
@@ -1,41 +1,41 @@
-#!/bin/sh
-
-# As PPPoE is an "on demand" interface we need to re-configure it when it
-# becomes up
-
-if [ "$6" != "{{ intf }}" ]; then
- exit
-fi
-
-{% if ipv6_autoconf -%}
-# add some info to syslog
-DIALER_PID=$(cat /var/run/{{ intf }}.pid)
-logger -t pppd[$DIALER_PID] "executing $0"
-logger -t pppd[$DIALER_PID] "configuring interface {{ intf }} via $2"
-
-# Configure interface-specific Host/Router behaviour.
-# Note: It is recommended to have the same setting on all interfaces; mixed
-# router/host scenarios are rather uncommon. Possible values are:
-#
-# 0 Forwarding disabled
-# 1 Forwarding enabled
-#
-echo 1 > /proc/sys/net/ipv6/conf/{{ intf }}/forwarding
-
-# Accept Router Advertisements; autoconfigure using them.
-#
-# It also determines whether or not to transmit Router
-# Solicitations. If and only if the functional setting is to
-# accept Router Advertisements, Router Solicitations will be
-# transmitted. Possible values are:
-#
-# 0 Do not accept Router Advertisements.
-# 1 Accept Router Advertisements if forwarding is disabled.
-# 2 Overrule forwarding behaviour. Accept Router Advertisements
-# even if forwarding is enabled.
-#
-echo 2 > /proc/sys/net/ipv6/conf/{{ intf }}/accept_ra
-
-# Autoconfigure addresses using Prefix Information in Router Advertisements.
-echo 1 > /proc/sys/net/ipv6/conf/{{ intf }}/autoconfigure
-{% endif %}
+#!/bin/sh
+
+# As PPPoE is an "on demand" interface we need to re-configure it when it
+# becomes up
+
+if [ "$6" != "{{ intf }}" ]; then
+ exit
+fi
+
+{% if ipv6_autoconf -%}
+# add some info to syslog
+DIALER_PID=$(cat /var/run/{{ intf }}.pid)
+logger -t pppd[$DIALER_PID] "executing $0"
+logger -t pppd[$DIALER_PID] "configuring interface {{ intf }} via {{ source_interface }}"
+
+# Configure interface-specific Host/Router behaviour.
+# Note: It is recommended to have the same setting on all interfaces; mixed
+# router/host scenarios are rather uncommon. Possible values are:
+#
+# 0 Forwarding disabled
+# 1 Forwarding enabled
+#
+echo 1 > /proc/sys/net/ipv6/conf/{{ intf }}/forwarding
+
+# Accept Router Advertisements; autoconfigure using them.
+#
+# It also determines whether or not to transmit Router
+# Solicitations. If and only if the functional setting is to
+# accept Router Advertisements, Router Solicitations will be
+# transmitted. Possible values are:
+#
+# 0 Do not accept Router Advertisements.
+# 1 Accept Router Advertisements if forwarding is disabled.
+# 2 Overrule forwarding behaviour. Accept Router Advertisements
+# even if forwarding is enabled.
+#
+echo 2 > /proc/sys/net/ipv6/conf/{{ intf }}/accept_ra
+
+# Autoconfigure addresses using Prefix Information in Router Advertisements.
+echo 1 > /proc/sys/net/ipv6/conf/{{ intf }}/autoconfigure
+{% endif %}
diff --git a/data/templates/pppoe/peer.tmpl b/data/templates/pppoe/peer.tmpl
index 029361101..8651f12a5 100644
--- a/data/templates/pppoe/peer.tmpl
+++ b/data/templates/pppoe/peer.tmpl
@@ -1,69 +1,63 @@
-### Autogenerated by interfaces-pppoe.py ###
-
-{% if description %}
-# {{ description }}
-{% endif %}
-
-# Require peer to provide the local IP address if it is not
-# specified explicitly in the config file.
-noipdefault
-
-# Don't show the password in logfiles:
-hide-password
-
-# Standard Link Control Protocol (LCP) parameters:
-lcp-echo-interval 20
-lcp-echo-failure 3
-
-# RFC 2516, paragraph 7 mandates that the following options MUST NOT be
-# requested and MUST be rejected if requested by the peer:
-# Address-and-Control-Field-Compression (ACFC)
-noaccomp
-
-# Asynchronous-Control-Character-Map (ACCM)
-default-asyncmap
-
-# Override any connect script that may have been set in /etc/ppp/options.
-connect /bin/true
-
-# Don't try to authenticate the remote node
-noauth
-
-# Don't try to proxy ARP for the remote endpoint. User can set proxy
-# arp entries up manually if they wish. More importantly, having
-# the "proxyarp" parameter set disables the "defaultroute" option.
-noproxyarp
-
-# Unlimited connection attempts
-maxfail 0
-
-plugin rp-pppoe.so
-{{ source_interface }}
-persist
-ifname {{ intf }}
-ipparam {{ intf }}
-debug
-logfile {{ logfile }}
-{% if 'auto' in default_route -%}
-defaultroute
-{% elif 'force' in default_route -%}
-defaultroute
-replacedefaultroute
-{% endif %}
-mtu {{ mtu }}
-mru {{ mtu }}
-user "{{ auth_username }}"
-password "{{ auth_password }}"
-{% if name_server -%}
-usepeerdns
-{% endif %}
-{% if ipv6_enable -%}
-+ipv6
-ipv6cp-use-ipaddr
-{% endif %}
-{% if service_name -%}
-rp_pppoe_service "{{ service_name }}"
-{% endif %}
-{% if on_demand %}
-demand
-{% endif %}
+### Autogenerated by interfaces-pppoe.py ###
+
+{% if description %}
+# {{ description }}
+{% endif %}
+
+# Require peer to provide the local IP address if it is not
+# specified explicitly in the config file.
+noipdefault
+
+# Don't show the password in logfiles:
+hide-password
+
+# Standard Link Control Protocol (LCP) parameters:
+lcp-echo-interval 20
+lcp-echo-failure 3
+
+# RFC 2516, paragraph 7 mandates that the following options MUST NOT be
+# requested and MUST be rejected if requested by the peer:
+# Address-and-Control-Field-Compression (ACFC)
+noaccomp
+
+# Asynchronous-Control-Character-Map (ACCM)
+default-asyncmap
+
+# Override any connect script that may have been set in /etc/ppp/options.
+connect /bin/true
+
+# Don't try to authenticate the remote node
+noauth
+
+# Don't try to proxy ARP for the remote endpoint. User can set proxy
+# arp entries up manually if they wish. More importantly, having
+# the "proxyarp" parameter set disables the "defaultroute" option.
+noproxyarp
+
+# Unlimited connection attempts
+maxfail 0
+
+plugin rp-pppoe.so
+{{ source_interface }}
+persist
+ifname {{ intf }}
+ipparam {{ intf }}
+debug
+logfile {{ logfile }}
+mtu {{ mtu }}
+mru {{ mtu }}
+user "{{ auth_username }}"
+password "{{ auth_password }}"
+{% if name_server -%}
+usepeerdns
+{% endif %}
+{% if ipv6_enable -%}
++ipv6
+ipv6cp-use-ipaddr
+{% endif %}
+{% if service_name -%}
+rp_pppoe_service "{{ service_name }}"
+{% endif %}
+{% if on_demand %}
+demand
+{% endif %}