summaryrefslogtreecommitdiff
path: root/data
diff options
context:
space:
mode:
authorChristian Poessinger <christian@poessinger.com>2020-04-05 16:46:46 +0200
committerChristian Poessinger <christian@poessinger.com>2020-04-05 16:46:46 +0200
commit0e3953fbed9709095cc2738862efdcffaee31230 (patch)
treed572dee27851e28ec16760e82c2c3256065fedc1 /data
parentcce97b21745987f88228cf0ea8c147243f3aec4f (diff)
downloadvyos-1x-0e3953fbed9709095cc2738862efdcffaee31230.tar.gz
vyos-1x-0e3953fbed9709095cc2738862efdcffaee31230.zip
T2230: confert dos to unix line endings
Diffstat (limited to 'data')
-rw-r--r--data/templates/l2tp/chap-secrets.tmpl22
-rw-r--r--data/templates/l2tp/l2tp.config.tmpl346
-rw-r--r--data/templates/pppoe/ip-pre-up.script.tmpl38
-rw-r--r--data/templates/wifi/hostapd.conf.tmpl1432
-rw-r--r--data/templates/wifi/wpa_supplicant.conf.tmpl18
-rw-r--r--data/templates/wwan/chat.tmpl12
-rw-r--r--data/templates/wwan/ip-pre-up.script.tmpl46
7 files changed, 957 insertions, 957 deletions
diff --git a/data/templates/l2tp/chap-secrets.tmpl b/data/templates/l2tp/chap-secrets.tmpl
index ee47a583e..323528b3c 100644
--- a/data/templates/l2tp/chap-secrets.tmpl
+++ b/data/templates/l2tp/chap-secrets.tmpl
@@ -1,11 +1,11 @@
-# username server password acceptable local IP addresses shaper
-{% for user in authentication['local-users'] %}
-{% if authentication['local-users'][user]['state'] == 'enabled' %}
-{% if (authentication['local-users'][user]['upload']) and (authentication['local-users'][user]['download']) %}
-{{user}}\t*\t{{authentication['local-users'][user]['passwd']}}\t{{authentication['local-users'][user]['ip']}}\t\
-{{authentication['local-users'][user]['download']}}/{{authentication['local-users'][user]['upload']}}
-{% else %}
-{{user}}\t*\t{{authentication['local-users'][user]['passwd']}}\t{{authentication['local-users'][user]['ip']}}
-{% endif %}
-{% endif %}
-{% endfor %}
+# username server password acceptable local IP addresses shaper
+{% for user in authentication['local-users'] %}
+{% if authentication['local-users'][user]['state'] == 'enabled' %}
+{% if (authentication['local-users'][user]['upload']) and (authentication['local-users'][user]['download']) %}
+{{user}}\t*\t{{authentication['local-users'][user]['passwd']}}\t{{authentication['local-users'][user]['ip']}}\t\
+{{authentication['local-users'][user]['download']}}/{{authentication['local-users'][user]['upload']}}
+{% else %}
+{{user}}\t*\t{{authentication['local-users'][user]['passwd']}}\t{{authentication['local-users'][user]['ip']}}
+{% endif %}
+{% endif %}
+{% endfor %}
diff --git a/data/templates/l2tp/l2tp.config.tmpl b/data/templates/l2tp/l2tp.config.tmpl
index 901b43d01..b8637e256 100644
--- a/data/templates/l2tp/l2tp.config.tmpl
+++ b/data/templates/l2tp/l2tp.config.tmpl
@@ -1,173 +1,173 @@
-### generated by accel_l2tp.py ###
-[modules]
-log_syslog
-l2tp
-chap-secrets
-{% for proto in authentication['auth_proto']: %}
-{{proto}}
-{% endfor%}
-{% if authentication['mode'] == 'radius' %}
-radius
-{% endif -%}
-ippool
-shaper
-ipv6pool
-ipv6_nd
-ipv6_dhcp
-
-[core]
-thread-count={{thread_cnt}}
-
-[log]
-syslog=accel-l2tp,daemon
-copy=1
-level=5
-
-{% if dns %}
-[dns]
-{% if dns[0] %}
-dns1={{dns[0]}}
-{% endif %}
-{% if dns[1] %}
-dns2={{dns[1]}}
-{% endif %}
-{% endif -%}
-
-{% if dnsv6 %}
-[ipv6-dns]
-{% for srv in dnsv6: %}
-{{srv}}
-{% endfor %}
-{% endif %}
-
-{% if wins %}
-[wins]
-{% if wins[0] %}
-wins1={{wins[0]}}
-{% endif %}
-{% if wins[1] %}
-wins2={{wins[1]}}
-{% endif %}
-{% endif -%}
-
-[l2tp]
-verbose=1
-ifname=l2tp%d
-ppp-max-mtu={{mtu}}
-mppe={{authentication['mppe']}}
-{% if outside_addr %}
-bind={{outside_addr}}
-{% endif %}
-{% if lns_shared_secret %}
-secret={{lns_shared_secret}}
-{% endif %}
-
-[client-ip-range]
-0.0.0.0/0
-
-{% if (client_ip_pool) or (client_ip_subnets) %}
-[ip-pool]
-{% if client_ip_pool %}
-{{client_ip_pool}}
-{% endif -%}
-{% if client_ip_subnets %}
-{% for sn in client_ip_subnets %}
-{{sn}}
-{% endfor -%}
-{% endif %}
-{% endif %}
-{% if gateway_address %}
-gw-ip-address={{gateway_address}}
-{% endif %}
-
-{% if authentication['mode'] == 'local' %}
-[chap-secrets]
-chap-secrets=/etc/accel-ppp/l2tp/chap-secrets
-{% if gateway_address %}
-gw-ip-address={{gateway_address}}
-{% endif %}
-{% endif %}
-
-[ppp]
-verbose=1
-check-ip=1
-single-session=replace
-{% if idle_timeout %}
-lcp-echo-timeout={{idle_timeout}}
-{% endif %}
-{% if ppp_options['lcp-echo-interval'] %}
-lcp-echo-interval={{ppp_options['lcp-echo-interval']}}
-{% else %}
-lcp-echo-interval=30
-{% endif %}
-{% if ppp_options['lcp-echo-failure'] %}
-lcp-echo-failure={{ppp_options['lcp-echo-failure']}}
-{% else %}
-lcp-echo-failure=3
-{% endif %}
-{% if ccp_disable %}
-ccp=0
-{% endif %}
-{% if client_ipv6_pool %}
-ipv6=allow
-{% endif %}
-
-{% if authentication['mode'] == 'radius' %}
-[radius]
-{% for rsrv in authentication['radiussrv']: %}
-server={{rsrv}},{{authentication['radiussrv'][rsrv]['secret']}},\
-req-limit={{authentication['radiussrv'][rsrv]['req-limit']}},\
-fail-time={{authentication['radiussrv'][rsrv]['fail-time']}}
-{% endfor %}
-{% if authentication['radiusopt']['timeout'] %}
-timeout={{authentication['radiusopt']['timeout']}}
-{% endif %}
-{% if authentication['radiusopt']['acct-timeout'] %}
-acct-timeout={{authentication['radiusopt']['acct-timeout']}}
-{% endif %}
-{% if authentication['radiusopt']['max-try'] %}
-max-try={{authentication['radiusopt']['max-try']}}
-{% endif %}
-{% if authentication['radiusopt']['nas-id'] %}
-nas-identifier={{authentication['radiusopt']['nas-id']}}
-{% endif %}
-{% if authentication['radius_source_address'] %}
-nas-ip-address={{authentication['radius_source_address']}}
-{% endif -%}
-{% if authentication['radiusopt']['dae-srv'] %}
-dae-server={{authentication['radiusopt']['dae-srv']['ip-addr']}}:\
-{{authentication['radiusopt']['dae-srv']['port']}},\
-{{authentication['radiusopt']['dae-srv']['secret']}}
-{% endif -%}
-gw-ip-address={{gateway_address}}
-verbose=1
-{% endif -%}
-
-{% if client_ipv6_pool %}
-[ipv6-pool]
-{% for prfx in client_ipv6_pool.prefix: %}
-{{prfx}}
-{% endfor %}
-{% for prfx in client_ipv6_pool.delegate_prefix: %}
-delegate={{prfx}}
-{% endfor %}
-{% endif %}
-
-{% if client_ipv6_pool['delegate_prefix'] %}
-[ipv6-dhcp]
-verbose=1
-{% endif %}
-
-{% if authentication['radiusopt']['shaper'] %}
-[shaper]
-verbose=1
-attr={{authentication['radiusopt']['shaper']['attr']}}
-{% if authentication['radiusopt']['shaper']['vendor'] %}
-vendor={{authentication['radiusopt']['shaper']['vendor']}}
-{% endif -%}
-{% endif %}
-
-[cli]
-tcp=127.0.0.1:2004
-sessions-columns=ifname,username,calling-sid,ip,{{ip6_column}}{{ip6_dp_column}}rate-limit,type,comp,state,rx-bytes,tx-bytes,uptime
-
+### generated by accel_l2tp.py ###
+[modules]
+log_syslog
+l2tp
+chap-secrets
+{% for proto in authentication['auth_proto']: %}
+{{proto}}
+{% endfor%}
+{% if authentication['mode'] == 'radius' %}
+radius
+{% endif -%}
+ippool
+shaper
+ipv6pool
+ipv6_nd
+ipv6_dhcp
+
+[core]
+thread-count={{thread_cnt}}
+
+[log]
+syslog=accel-l2tp,daemon
+copy=1
+level=5
+
+{% if dns %}
+[dns]
+{% if dns[0] %}
+dns1={{dns[0]}}
+{% endif %}
+{% if dns[1] %}
+dns2={{dns[1]}}
+{% endif %}
+{% endif -%}
+
+{% if dnsv6 %}
+[ipv6-dns]
+{% for srv in dnsv6: %}
+{{srv}}
+{% endfor %}
+{% endif %}
+
+{% if wins %}
+[wins]
+{% if wins[0] %}
+wins1={{wins[0]}}
+{% endif %}
+{% if wins[1] %}
+wins2={{wins[1]}}
+{% endif %}
+{% endif -%}
+
+[l2tp]
+verbose=1
+ifname=l2tp%d
+ppp-max-mtu={{mtu}}
+mppe={{authentication['mppe']}}
+{% if outside_addr %}
+bind={{outside_addr}}
+{% endif %}
+{% if lns_shared_secret %}
+secret={{lns_shared_secret}}
+{% endif %}
+
+[client-ip-range]
+0.0.0.0/0
+
+{% if (client_ip_pool) or (client_ip_subnets) %}
+[ip-pool]
+{% if client_ip_pool %}
+{{client_ip_pool}}
+{% endif -%}
+{% if client_ip_subnets %}
+{% for sn in client_ip_subnets %}
+{{sn}}
+{% endfor -%}
+{% endif %}
+{% endif %}
+{% if gateway_address %}
+gw-ip-address={{gateway_address}}
+{% endif %}
+
+{% if authentication['mode'] == 'local' %}
+[chap-secrets]
+chap-secrets=/etc/accel-ppp/l2tp/chap-secrets
+{% if gateway_address %}
+gw-ip-address={{gateway_address}}
+{% endif %}
+{% endif %}
+
+[ppp]
+verbose=1
+check-ip=1
+single-session=replace
+{% if idle_timeout %}
+lcp-echo-timeout={{idle_timeout}}
+{% endif %}
+{% if ppp_options['lcp-echo-interval'] %}
+lcp-echo-interval={{ppp_options['lcp-echo-interval']}}
+{% else %}
+lcp-echo-interval=30
+{% endif %}
+{% if ppp_options['lcp-echo-failure'] %}
+lcp-echo-failure={{ppp_options['lcp-echo-failure']}}
+{% else %}
+lcp-echo-failure=3
+{% endif %}
+{% if ccp_disable %}
+ccp=0
+{% endif %}
+{% if client_ipv6_pool %}
+ipv6=allow
+{% endif %}
+
+{% if authentication['mode'] == 'radius' %}
+[radius]
+{% for rsrv in authentication['radiussrv']: %}
+server={{rsrv}},{{authentication['radiussrv'][rsrv]['secret']}},\
+req-limit={{authentication['radiussrv'][rsrv]['req-limit']}},\
+fail-time={{authentication['radiussrv'][rsrv]['fail-time']}}
+{% endfor %}
+{% if authentication['radiusopt']['timeout'] %}
+timeout={{authentication['radiusopt']['timeout']}}
+{% endif %}
+{% if authentication['radiusopt']['acct-timeout'] %}
+acct-timeout={{authentication['radiusopt']['acct-timeout']}}
+{% endif %}
+{% if authentication['radiusopt']['max-try'] %}
+max-try={{authentication['radiusopt']['max-try']}}
+{% endif %}
+{% if authentication['radiusopt']['nas-id'] %}
+nas-identifier={{authentication['radiusopt']['nas-id']}}
+{% endif %}
+{% if authentication['radius_source_address'] %}
+nas-ip-address={{authentication['radius_source_address']}}
+{% endif -%}
+{% if authentication['radiusopt']['dae-srv'] %}
+dae-server={{authentication['radiusopt']['dae-srv']['ip-addr']}}:\
+{{authentication['radiusopt']['dae-srv']['port']}},\
+{{authentication['radiusopt']['dae-srv']['secret']}}
+{% endif -%}
+gw-ip-address={{gateway_address}}
+verbose=1
+{% endif -%}
+
+{% if client_ipv6_pool %}
+[ipv6-pool]
+{% for prfx in client_ipv6_pool.prefix: %}
+{{prfx}}
+{% endfor %}
+{% for prfx in client_ipv6_pool.delegate_prefix: %}
+delegate={{prfx}}
+{% endfor %}
+{% endif %}
+
+{% if client_ipv6_pool['delegate_prefix'] %}
+[ipv6-dhcp]
+verbose=1
+{% endif %}
+
+{% if authentication['radiusopt']['shaper'] %}
+[shaper]
+verbose=1
+attr={{authentication['radiusopt']['shaper']['attr']}}
+{% if authentication['radiusopt']['shaper']['vendor'] %}
+vendor={{authentication['radiusopt']['shaper']['vendor']}}
+{% endif -%}
+{% endif %}
+
+[cli]
+tcp=127.0.0.1:2004
+sessions-columns=ifname,username,calling-sid,ip,{{ip6_column}}{{ip6_dp_column}}rate-limit,type,comp,state,rx-bytes,tx-bytes,uptime
+
diff --git a/data/templates/pppoe/ip-pre-up.script.tmpl b/data/templates/pppoe/ip-pre-up.script.tmpl
index f72781e41..9a7ba7d57 100644
--- a/data/templates/pppoe/ip-pre-up.script.tmpl
+++ b/data/templates/pppoe/ip-pre-up.script.tmpl
@@ -1,19 +1,19 @@
-#!/bin/sh
-
-# As PPPoE is an "on demand" interface we need to re-configure it when it
-# becomes up
-
-if [ "$6" != "{{ intf }}" ]; then
- exit
-fi
-
-# add some info to syslog
-DIALER_PID=$(cat /var/run/{{ intf }}.pid)
-logger -t pppd[$DIALER_PID] "executing $0"
-
-echo "{{ description }}" > /sys/class/net/{{ intf }}/ifalias
-
-{% if vrf -%}
-logger -t pppd[$DIALER_PID] "configuring dialer interface $6 for VRF {{ vrf }}"
-ip link set dev {{ intf }} master {{ vrf }}
-{% endif %}
+#!/bin/sh
+
+# As PPPoE is an "on demand" interface we need to re-configure it when it
+# becomes up
+
+if [ "$6" != "{{ intf }}" ]; then
+ exit
+fi
+
+# add some info to syslog
+DIALER_PID=$(cat /var/run/{{ intf }}.pid)
+logger -t pppd[$DIALER_PID] "executing $0"
+
+echo "{{ description }}" > /sys/class/net/{{ intf }}/ifalias
+
+{% if vrf -%}
+logger -t pppd[$DIALER_PID] "configuring dialer interface $6 for VRF {{ vrf }}"
+ip link set dev {{ intf }} master {{ vrf }}
+{% endif %}
diff --git a/data/templates/wifi/hostapd.conf.tmpl b/data/templates/wifi/hostapd.conf.tmpl
index 8505119e7..bd2132b27 100644
--- a/data/templates/wifi/hostapd.conf.tmpl
+++ b/data/templates/wifi/hostapd.conf.tmpl
@@ -1,716 +1,716 @@
-### Autogenerated by interfaces-wireless.py ###
-{% if description %}
-# Description: {{ description }}
-# User-friendly description of device; up to 32 octets encoded in UTF-8
-device_name={{ description | truncate(32, True) }}
-{% endif %}
-
-# AP netdevice name (without 'ap' postfix, i.e., wlan0 uses wlan0ap for
-# management frames with the Host AP driver); wlan0 with many nl80211 drivers
-# Note: This attribute can be overridden by the values supplied with the '-i'
-# command line parameter.
-interface={{ intf }}
-
-# Driver interface type (hostap/wired/none/nl80211/bsd);
-# default: hostap). nl80211 is used with all Linux mac80211 drivers.
-# Use driver=none if building hostapd as a standalone RADIUS server that does
-# not control any wireless/wired driver.
-driver=nl80211
-
-# Levels (minimum value for logged events):
-# 0 = verbose debugging
-# 1 = debugging
-# 2 = informational messages
-# 3 = notification
-# 4 = warning
-logger_syslog=-1
-logger_syslog_level=0
-logger_stdout=-1
-logger_stdout_level=0
-
-{%- if country_code %}
-
-# Country code (ISO/IEC 3166-1). Used to set regulatory domain.
-# Set as needed to indicate country in which device is operating.
-# This can limit available channels and transmit power.
-country_code={{ country_code }}
-
-# Enable IEEE 802.11d. This advertises the country_code and the set of allowed
-# channels and transmit power levels based on the regulatory limits. The
-# country_code setting must be configured with the correct country for
-# IEEE 802.11d functions.
-ieee80211d=1
-{% endif %}
-
-{%- if ssid %}
-
-# SSID to be used in IEEE 802.11 management frames
-ssid={{ ssid }}
-{% endif %}
-
-{%- if channel %}
-
-# Channel number (IEEE 802.11)
-# (default: 0, i.e., not set)
-# Please note that some drivers do not use this value from hostapd and the
-# channel will need to be configured separately with iwconfig.
-#
-# If CONFIG_ACS build option is enabled, the channel can be selected
-# automatically at run time by setting channel=acs_survey or channel=0, both of
-# which will enable the ACS survey based algorithm.
-channel={{ channel }}
-{% endif %}
-
-{%- if mode %}
-
-# Operation mode (a = IEEE 802.11a (5 GHz), b = IEEE 802.11b (2.4 GHz),
-# g = IEEE 802.11g (2.4 GHz), ad = IEEE 802.11ad (60 GHz); a/g options are used
-# with IEEE 802.11n (HT), too, to specify band). For IEEE 802.11ac (VHT), this
-# needs to be set to hw_mode=a. For IEEE 802.11ax (HE) on 6 GHz this needs
-# to be set to hw_mode=a. When using ACS (see channel parameter), a
-# special value "any" can be used to indicate that any support band can be used.
-# This special case is currently supported only with drivers with which
-# offloaded ACS is used.
-{% if 'n' in mode -%}
-hw_mode=g
-ieee80211n=1
-{% elif 'ac' in mode -%}
-hw_mode=a
-ieee80211h=1
-ieee80211ac=1
-{% else -%}
-hw_mode={{ mode }}
-{% endif %}
-{% endif %}
-
-# ieee80211w: Whether management frame protection (MFP) is enabled
-# 0 = disabled (default)
-# 1 = optional
-# 2 = required
-{% if 'disabled' in mgmt_frame_protection -%}
-ieee80211w=0
-{% elif 'optional' in mgmt_frame_protection -%}
-ieee80211w=1
-{% elif 'required' in mgmt_frame_protection -%}
-ieee80211w=2
-{% endif %}
-
-# ht_capab: HT capabilities (list of flags)
-# LDPC coding capability: [LDPC] = supported
-# Supported channel width set: [HT40-] = both 20 MHz and 40 MHz with secondary
-# channel below the primary channel; [HT40+] = both 20 MHz and 40 MHz
-# with secondary channel above the primary channel
-# (20 MHz only if neither is set)
-# Note: There are limits on which channels can be used with HT40- and
-# HT40+. Following table shows the channels that may be available for
-# HT40- and HT40+ use per IEEE 802.11n Annex J:
-# freq HT40- HT40+
-# 2.4 GHz 5-13 1-7 (1-9 in Europe/Japan)
-# 5 GHz 40,48,56,64 36,44,52,60
-# (depending on the location, not all of these channels may be available
-# for use)
-# Please note that 40 MHz channels may switch their primary and secondary
-# channels if needed or creation of 40 MHz channel maybe rejected based
-# on overlapping BSSes. These changes are done automatically when hostapd
-# is setting up the 40 MHz channel.
-# Spatial Multiplexing (SM) Power Save: [SMPS-STATIC] or [SMPS-DYNAMIC]
-# (SMPS disabled if neither is set)
-# HT-greenfield: [GF] (disabled if not set)
-# Short GI for 20 MHz: [SHORT-GI-20] (disabled if not set)
-# Short GI for 40 MHz: [SHORT-GI-40] (disabled if not set)
-# Tx STBC: [TX-STBC] (disabled if not set)
-# Rx STBC: [RX-STBC1] (one spatial stream), [RX-STBC12] (one or two spatial
-# streams), or [RX-STBC123] (one, two, or three spatial streams); Rx STBC
-# disabled if none of these set
-# HT-delayed Block Ack: [DELAYED-BA] (disabled if not set)
-# Maximum A-MSDU length: [MAX-AMSDU-7935] for 7935 octets (3839 octets if not
-# set)
-# DSSS/CCK Mode in 40 MHz: [DSSS_CCK-40] = allowed (not allowed if not set)
-# 40 MHz intolerant [40-INTOLERANT] (not advertised if not set)
-# L-SIG TXOP protection support: [LSIG-TXOP-PROT] (disabled if not set)
-{% if cap_ht %}
-ht_capab=
-{%- endif -%}
-
-{%- if cap_ht_40mhz_incapable -%}
-[40-INTOLERANT]
-{%- endif -%}
-
-{%- if cap_ht_delayed_block_ack -%}
-[DELAYED-BA]
-{%- endif -%}
-
-{%- if cap_ht_dsss_cck_40 -%}
-[DSSS_CCK-40]
-{%- endif -%}
-
-{%- if cap_ht_greenfield -%}
-[GF]
-{%- endif -%}
-
-{%- if cap_ht_ldpc -%}
-[LDPC]
-{%- endif -%}
-
-{%- if cap_ht_lsig_protection -%}
-[LSIG-TXOP-PROT]
-{%- endif -%}
-
-{%- if cap_ht_max_amsdu -%}
-[MAX-AMSDU-{{ cap_ht_max_amsdu }}]
-{%- endif -%}
-
-{%- if cap_ht_smps -%}
-[SMPS-{{ cap_ht_smps | upper }}]
-{%- endif -%}
-
-{%- if cap_ht_chan_set_width -%}
-{%- for csw in cap_ht_chan_set_width -%}
-[{{ csw | upper }}]
-{%- endfor -%}
-{%- endif -%}
-
-{%- if cap_ht_short_gi -%}
-{%- for gi in cap_ht_short_gi -%}
-[SHORT-GI-{{ gi }}]
-{%- endfor -%}
-{%- endif -%}
-
-{%- if cap_ht_stbc_tx -%}
-[TX-STBC]
-{%- endif -%}
-{%- if cap_ht_stbc_rx -%}
-[RX-STBC{{ cap_ht_stbc_rx }}]
-{%- endif %}
-
-# Required for full HT and VHT functionality
-wme_enabled=1
-
-{% if cap_ht_powersave -%}
-# WMM-PS Unscheduled Automatic Power Save Delivery [U-APSD]
-# Enable this flag if U-APSD supported outside hostapd (eg., Firmware/driver)
-uapsd_advertisement_enabled=1
-{%- endif %}
-
-{% if cap_req_ht -%}
-# Require stations to support HT PHY (reject association if they do not)
-require_ht=1
-{% endif %}
-
-{%- if cap_vht_chan_set_width -%}
-vht_oper_chwidth={{ cap_vht_chan_set_width }}
-{%- endif -%}
-
-# vht_capab: VHT capabilities (list of flags)
-#
-# vht_max_mpdu_len: [MAX-MPDU-7991] [MAX-MPDU-11454]
-# Indicates maximum MPDU length
-# 0 = 3895 octets (default)
-# 1 = 7991 octets
-# 2 = 11454 octets
-# 3 = reserved
-#
-# supported_chan_width: [VHT160] [VHT160-80PLUS80]
-# Indicates supported Channel widths
-# 0 = 160 MHz & 80+80 channel widths are not supported (default)
-# 1 = 160 MHz channel width is supported
-# 2 = 160 MHz & 80+80 channel widths are supported
-# 3 = reserved
-#
-# Rx LDPC coding capability: [RXLDPC]
-# Indicates support for receiving LDPC coded pkts
-# 0 = Not supported (default)
-# 1 = Supported
-#
-# Short GI for 80 MHz: [SHORT-GI-80]
-# Indicates short GI support for reception of packets transmitted with TXVECTOR
-# params format equal to VHT and CBW = 80Mhz
-# 0 = Not supported (default)
-# 1 = Supported
-#
-# Short GI for 160 MHz: [SHORT-GI-160]
-# Indicates short GI support for reception of packets transmitted with TXVECTOR
-# params format equal to VHT and CBW = 160Mhz
-# 0 = Not supported (default)
-# 1 = Supported
-#
-# Tx STBC: [TX-STBC-2BY1]
-# Indicates support for the transmission of at least 2x1 STBC
-# 0 = Not supported (default)
-# 1 = Supported
-#
-# Rx STBC: [RX-STBC-1] [RX-STBC-12] [RX-STBC-123] [RX-STBC-1234]
-# Indicates support for the reception of PPDUs using STBC
-# 0 = Not supported (default)
-# 1 = support of one spatial stream
-# 2 = support of one and two spatial streams
-# 3 = support of one, two and three spatial streams
-# 4 = support of one, two, three and four spatial streams
-# 5,6,7 = reserved
-#
-# SU Beamformer Capable: [SU-BEAMFORMER]
-# Indicates support for operation as a single user beamformer
-# 0 = Not supported (default)
-# 1 = Supported
-#
-# SU Beamformee Capable: [SU-BEAMFORMEE]
-# Indicates support for operation as a single user beamformee
-# 0 = Not supported (default)
-# 1 = Supported
-#
-# Compressed Steering Number of Beamformer Antennas Supported:
-# [BF-ANTENNA-2] [BF-ANTENNA-3] [BF-ANTENNA-4]
-# Beamformee's capability indicating the maximum number of beamformer
-# antennas the beamformee can support when sending compressed beamforming
-# feedback
-# If SU beamformer capable, set to maximum value minus 1
-# else reserved (default)
-#
-# Number of Sounding Dimensions:
-# [SOUNDING-DIMENSION-2] [SOUNDING-DIMENSION-3] [SOUNDING-DIMENSION-4]
-# Beamformer's capability indicating the maximum value of the NUM_STS parameter
-# in the TXVECTOR of a VHT NDP
-# If SU beamformer capable, set to maximum value minus 1
-# else reserved (default)
-#
-# MU Beamformer Capable: [MU-BEAMFORMER]
-# Indicates support for operation as an MU beamformer
-# 0 = Not supported or sent by Non-AP STA (default)
-# 1 = Supported
-#
-# VHT TXOP PS: [VHT-TXOP-PS]
-# Indicates whether or not the AP supports VHT TXOP Power Save Mode
-# or whether or not the STA is in VHT TXOP Power Save mode
-# 0 = VHT AP doesn't support VHT TXOP PS mode (OR) VHT STA not in VHT TXOP PS
-# mode
-# 1 = VHT AP supports VHT TXOP PS mode (OR) VHT STA is in VHT TXOP power save
-# mode
-#
-# +HTC-VHT Capable: [HTC-VHT]
-# Indicates whether or not the STA supports receiving a VHT variant HT Control
-# field.
-# 0 = Not supported (default)
-# 1 = supported
-#
-# Maximum A-MPDU Length Exponent: [MAX-A-MPDU-LEN-EXP0]..[MAX-A-MPDU-LEN-EXP7]
-# Indicates the maximum length of A-MPDU pre-EOF padding that the STA can recv
-# This field is an integer in the range of 0 to 7.
-# The length defined by this field is equal to
-# 2 pow(13 + Maximum A-MPDU Length Exponent) -1 octets
-#
-# VHT Link Adaptation Capable: [VHT-LINK-ADAPT2] [VHT-LINK-ADAPT3]
-# Indicates whether or not the STA supports link adaptation using VHT variant
-# HT Control field
-# If +HTC-VHTcapable is 1
-# 0 = (no feedback) if the STA does not provide VHT MFB (default)
-# 1 = reserved
-# 2 = (Unsolicited) if the STA provides only unsolicited VHT MFB
-# 3 = (Both) if the STA can provide VHT MFB in response to VHT MRQ and if the
-# STA provides unsolicited VHT MFB
-# Reserved if +HTC-VHTcapable is 0
-#
-# Rx Antenna Pattern Consistency: [RX-ANTENNA-PATTERN]
-# Indicates the possibility of Rx antenna pattern change
-# 0 = Rx antenna pattern might change during the lifetime of an association
-# 1 = Rx antenna pattern does not change during the lifetime of an association
-#
-# Tx Antenna Pattern Consistency: [TX-ANTENNA-PATTERN]
-# Indicates the possibility of Tx antenna pattern change
-# 0 = Tx antenna pattern might change during the lifetime of an association
-# 1 = Tx antenna pattern does not change during the lifetime of an association
-{% if cap_vht %}
-vht_capab=
-{%- endif -%}
-
-{%- if cap_vht_max_mpdu -%}
-[MAX-MPDU-{{ cap_vht_max_mpdu }}]
-{%- endif -%}
-
-{%- if cap_vht_max_mpdu_exp -%}
-[MAX-A-MPDU-LEN-EXP{{ cap_vht_max_mpdu_exp }}]
-{%- endif -%}
-
-{%- if cap_vht_chan_set_width -%}
-{%- if '2' in cap_vht_chan_set_width -%}
-[VHT160]
-{%- elif '3' in cap_vht_chan_set_width -%}
-[VHT160-80PLUS80]
-{%- endif -%}
-{%- endif -%}
-
-{%- if cap_vht_stbc_tx -%}
-[TX-STBC-2BY1]
-{%- endif -%}
-
-{%- if cap_vht_stbc_rx -%}
-[RX-STBC-{{ cap_vht_stbc_rx }}]
-{%- endif -%}
-
-{%- if cap_vht_link_adaptation -%}
-{%- if 'unsolicited' in cap_vht_link_adaptation -%}
-[VHT-LINK-ADAPT2]
-{%- elif 'both' in cap_vht_link_adaptation -%}
-[VHT-LINK-ADAPT3]
-{%- endif -%}
-{%- endif -%}
-
-{%- if cap_vht_short_gi -%}
-{%- for gi in cap_vht_short_gi -%}
-[SHORT-GI-{{ gi }}]
-{%- endfor -%}
-{%- endif -%}
-
-{%- if cap_vht_ldpc -%}
-[RXLDPC]
-{%- endif -%}
-
-{%- if cap_vht_tx_powersave -%}
-[VHT-TXOP-PS]
-{%- endif -%}
-
-{%- if cap_vht_vht_cf -%}
-[HTC-VHT]
-{%- endif -%}
-
-{%- if cap_vht_beamform -%}
-{%- for beamform in cap_vht_beamform -%}
-{%- if 'single-user-beamformer' in beamform -%}
-[SU-BEAMFORMER]
-{%- elif 'single-user-beamformee' in beamform -%}
-[SU-BEAMFORMEE]
-{%- elif 'multi-user-beamformer' in beamform -%}
-[MU-BEAMFORMER]
-{%- elif 'multi-user-beamformee' in beamform -%}
-[MU-BEAMFORMEE]
-{%- endif -%}
-{%- endfor -%}
-{%- endif -%}
-
-{%- if cap_vht_antenna_fixed -%}
-[RX-ANTENNA-PATTERN][TX-ANTENNA-PATTERN]
-{%- endif -%}
-
-{%- if cap_vht_antenna_cnt -%}
-{%- for beamform in cap_vht_beamform -%}
-{%- if 'single-user-beamformer' in beamform -%}
-[BF-ANTENNA-{{ cap_vht_antenna_cnt|int -1 }}][SOUNDING-DIMENSION-{{ cap_vht_antenna_cnt|int -1}}]
-{%- else -%}
-[BF-ANTENNA-{{ cap_vht_antenna_cnt }}][SOUNDING-DIMENSION-{{ cap_vht_antenna_cnt }}]
-{%- endif -%}
-{%- endfor -%}
-{%- endif %}
-
-# ieee80211n: Whether IEEE 802.11n (HT) is enabled
-# 0 = disabled (default)
-# 1 = enabled
-# Note: You will also need to enable WMM for full HT functionality.
-# Note: hw_mode=g (2.4 GHz) and hw_mode=a (5 GHz) is used to specify the band.
-{% if cap_req_vht -%}
-ieee80211n=0
-# Require stations to support VHT PHY (reject association if they do not)
-require_vht=1
-{% endif %}
-
-{% if cap_vht_center_freq_1 -%}
-# center freq = 5 GHz + (5 * index)
-# So index 42 gives center freq 5.210 GHz
-# which is channel 42 in 5G band
-vht_oper_centr_freq_seg0_idx={{ cap_vht_center_freq_1 }}
-{% endif %}
-
-{% if cap_vht_center_freq_2 -%}
-# center freq = 5 GHz + (5 * index)
-# So index 159 gives center freq 5.795 GHz
-# which is channel 159 in 5G band
-vht_oper_centr_freq_seg1_idx={{ cap_vht_center_freq_2 }}
-{% endif %}
-
-{% if disable_broadcast_ssid -%}
-# Send empty SSID in beacons and ignore probe request frames that do not
-# specify full SSID, i.e., require stations to know SSID.
-# default: disabled (0)
-# 1 = send empty (length=0) SSID in beacon and ignore probe request for
-# broadcast SSID
-# 2 = clear SSID (ASCII 0), but keep the original length (this may be required
-# with some clients that do not support empty SSID) and ignore probe
-# requests for broadcast SSID
-ignore_broadcast_ssid=1
-{% endif %}
-
-# Station MAC address -based authentication
-# Please note that this kind of access control requires a driver that uses
-# hostapd to take care of management frame processing and as such, this can be
-# used with driver=hostap or driver=nl80211, but not with driver=atheros.
-# 0 = accept unless in deny list
-# 1 = deny unless in accept list
-# 2 = use external RADIUS server (accept/deny lists are searched first)
-macaddr_acl=0
-
-{% if max_stations -%}
-# Maximum number of stations allowed in station table. New stations will be
-# rejected after the station table is full. IEEE 802.11 has a limit of 2007
-# different association IDs, so this number should not be larger than that.
-# (default: 2007)
-max_num_sta={{ max_stations }}
-{% endif %}
-
-{% if isolate_stations -%}
-# Client isolation can be used to prevent low-level bridging of frames between
-# associated stations in the BSS. By default, this bridging is allowed.
-ap_isolate=1
-{% endif %}
-
-{% if reduce_transmit_power -%}
-# Add Power Constraint element to Beacon and Probe Response frames
-# This config option adds Power Constraint element when applicable and Country
-# element is added. Power Constraint element is required by Transmit Power
-# Control. This can be used only with ieee80211d=1.
-# Valid values are 0..255.
-local_pwr_constraint={{ reduce_transmit_power }}
-{% endif %}
-
-{% if expunge_failing_stations -%}
-# Disassociate stations based on excessive transmission failures or other
-# indications of connection loss. This depends on the driver capabilities and
-# may not be available with all drivers.
-disassoc_low_ack=1
-{% endif %}
-
-{% if sec_wep -%}
-# IEEE 802.11 specifies two authentication algorithms. hostapd can be
-# configured to allow both of these or only one. Open system authentication
-# should be used with IEEE 802.1X.
-# Bit fields of allowed authentication algorithms:
-# bit 0 = Open System Authentication
-# bit 1 = Shared Key Authentication (requires WEP)
-auth_algs=2
-
-# WEP rekeying (disabled if key lengths are not set or are set to 0)
-# Key lengths for default/broadcast and individual/unicast keys:
-# 5 = 40-bit WEP (also known as 64-bit WEP with 40 secret bits)
-# 13 = 104-bit WEP (also known as 128-bit WEP with 104 secret bits)
-wep_key_len_broadcast=5
-wep_key_len_unicast=5
-
-# Static WEP key configuration
-#
-# The key number to use when transmitting.
-# It must be between 0 and 3, and the corresponding key must be set.
-# default: not set
-wep_default_key=0
-
-# The WEP keys to use.
-# A key may be a quoted string or unquoted hexadecimal digits.
-# The key length should be 5, 13, or 16 characters, or 10, 26, or 32
-# digits, depending on whether 40-bit (64-bit), 104-bit (128-bit), or
-# 128-bit (152-bit) WEP is used.
-# Only the default key must be supplied; the others are optional.
-{% if sec_wep_key -%}
-{% for key in sec_wep_key -%}
-wep_key{{ loop.index -1 }}={{ key}}
-{% endfor %}
-{%- endif %}
-
-{% elif sec_wpa -%}
-##### WPA/IEEE 802.11i configuration ##########################################
-
-# Enable WPA. Setting this variable configures the AP to require WPA (either
-# WPA-PSK or WPA-RADIUS/EAP based on other configuration). For WPA-PSK, either
-# wpa_psk or wpa_passphrase must be set and wpa_key_mgmt must include WPA-PSK.
-# Instead of wpa_psk / wpa_passphrase, wpa_psk_radius might suffice.
-# For WPA-RADIUS/EAP, ieee8021x must be set (but without dynamic WEP keys),
-# RADIUS authentication server must be configured, and WPA-EAP must be included
-# in wpa_key_mgmt.
-# This field is a bit field that can be used to enable WPA (IEEE 802.11i/D3.0)
-# and/or WPA2 (full IEEE 802.11i/RSN):
-# bit0 = WPA
-# bit1 = IEEE 802.11i/RSN (WPA2) (dot11RSNAEnabled)
-{% if 'both' in sec_wpa_mode -%}
-wpa=3
-{%- elif 'wpa2' in sec_wpa_mode -%}
-wpa=2
-{%- elif 'wpa' in sec_wpa_mode -%}
-wpa=1
-{%- endif %}
-
-{% if sec_wpa_cipher -%}
-# Set of accepted cipher suites (encryption algorithms) for pairwise keys
-# (unicast packets). This is a space separated list of algorithms:
-# CCMP = AES in Counter mode with CBC-MAC (CCMP-128)
-# TKIP = Temporal Key Integrity Protocol
-# CCMP-256 = AES in Counter mode with CBC-MAC with 256-bit key
-# GCMP = Galois/counter mode protocol (GCMP-128)
-# GCMP-256 = Galois/counter mode protocol with 256-bit key
-# Group cipher suite (encryption algorithm for broadcast and multicast frames)
-# is automatically selected based on this configuration. If only CCMP is
-# allowed as the pairwise cipher, group cipher will also be CCMP. Otherwise,
-# TKIP will be used as the group cipher. The optional group_cipher parameter can
-# be used to override this automatic selection.
-{% if 'wpa2' in sec_wpa_mode -%}
-# Pairwise cipher for RSN/WPA2 (default: use wpa_pairwise value)
-rsn_pairwise={{ sec_wpa_cipher | join(" ") }}
-{% else -%}
-# Pairwise cipher for WPA (v1) (default: TKIP)
-wpa_pairwise={{ sec_wpa_cipher | join(" ") }}
-{%- endif -%}
-{% endif %}
-
-{% if sec_wpa_passphrase -%}
-# IEEE 802.11 specifies two authentication algorithms. hostapd can be
-# configured to allow both of these or only one. Open system authentication
-# should be used with IEEE 802.1X.
-# Bit fields of allowed authentication algorithms:
-# bit 0 = Open System Authentication
-# bit 1 = Shared Key Authentication (requires WEP)
-auth_algs=1
-
-# WPA pre-shared keys for WPA-PSK. This can be either entered as a 256-bit
-# secret in hex format (64 hex digits), wpa_psk, or as an ASCII passphrase
-# (8..63 characters) that will be converted to PSK. This conversion uses SSID
-# so the PSK changes when ASCII passphrase is used and the SSID is changed.
-wpa_passphrase={{ sec_wpa_passphrase }}
-
-# Set of accepted key management algorithms (WPA-PSK, WPA-EAP, or both). The
-# entries are separated with a space. WPA-PSK-SHA256 and WPA-EAP-SHA256 can be
-# added to enable SHA256-based stronger algorithms.
-# WPA-PSK = WPA-Personal / WPA2-Personal
-# WPA-PSK-SHA256 = WPA2-Personal using SHA256
-wpa_key_mgmt=WPA-PSK
-
-{% elif sec_wpa_radius -%}
-##### IEEE 802.1X-2004 related configuration ##################################
-# Require IEEE 802.1X authorization
-ieee8021x=1
-
-# Set of accepted key management algorithms (WPA-PSK, WPA-EAP, or both). The
-# entries are separated with a space. WPA-PSK-SHA256 and WPA-EAP-SHA256 can be
-# added to enable SHA256-based stronger algorithms.
-# WPA-EAP = WPA-Enterprise / WPA2-Enterprise
-# WPA-EAP-SHA256 = WPA2-Enterprise using SHA256
-wpa_key_mgmt=WPA-EAP
-
-{% if sec_wpa_radius_source -%}
-# RADIUS client forced local IP address for the access point
-# Normally the local IP address is determined automatically based on configured
-# IP addresses, but this field can be used to force a specific address to be
-# used, e.g., when the device has multiple IP addresses.
-radius_client_addr={{ sec_wpa_radius_source }}
-
-# The own IP address of the access point (used as NAS-IP-Address)
-own_ip_addr={{ sec_wpa_radius_source }}
-{% else %}
-# The own IP address of the access point (used as NAS-IP-Address)
-own_ip_addr=127.0.0.1
-{% endif %}
-
-{% for radius in sec_wpa_radius -%}
-{%- if not radius.disabled -%}
-# RADIUS authentication server
-auth_server_addr={{ radius.server }}
-auth_server_port={{ radius.port }}
-auth_server_shared_secret={{ radius.key }}
-{% if radius.acc_port -%}
-# RADIUS accounting server
-acct_server_addr={{ radius.server }}
-acct_server_port={{ radius.acc_port }}
-acct_server_shared_secret={{ radius.key }}
-{% endif %}
-{% endif %}
-{% endfor %}
-
-{% endif %}
-
-{% else %}
-# Open system
-auth_algs=1
-{% endif %}
-
-# TX queue parameters (EDCF / bursting)
-# tx_queue_<queue name>_<param>
-# queues: data0, data1, data2, data3
-# (data0 is the highest priority queue)
-# parameters:
-# aifs: AIFS (default 2)
-# cwmin: cwMin (1, 3, 7, 15, 31, 63, 127, 255, 511, 1023, 2047, 4095, 8191,
-# 16383, 32767)
-# cwmax: cwMax (same values as cwMin, cwMax >= cwMin)
-# burst: maximum length (in milliseconds with precision of up to 0.1 ms) for
-# bursting
-#
-# Default WMM parameters (IEEE 802.11 draft; 11-03-0504-03-000e):
-# These parameters are used by the access point when transmitting frames
-# to the clients.
-#
-# Low priority / AC_BK = background
-tx_queue_data3_aifs=7
-tx_queue_data3_cwmin=15
-tx_queue_data3_cwmax=1023
-tx_queue_data3_burst=0
-# Note: for IEEE 802.11b mode: cWmin=31 cWmax=1023 burst=0
-#
-# Normal priority / AC_BE = best effort
-tx_queue_data2_aifs=3
-tx_queue_data2_cwmin=15
-tx_queue_data2_cwmax=63
-tx_queue_data2_burst=0
-# Note: for IEEE 802.11b mode: cWmin=31 cWmax=127 burst=0
-#
-# High priority / AC_VI = video
-tx_queue_data1_aifs=1
-tx_queue_data1_cwmin=7
-tx_queue_data1_cwmax=15
-tx_queue_data1_burst=3.0
-# Note: for IEEE 802.11b mode: cWmin=15 cWmax=31 burst=6.0
-#
-# Highest priority / AC_VO = voice
-tx_queue_data0_aifs=1
-tx_queue_data0_cwmin=3
-tx_queue_data0_cwmax=7
-tx_queue_data0_burst=1.5
-
-# Default WMM parameters (IEEE 802.11 draft; 11-03-0504-03-000e):
-# for 802.11a or 802.11g networks
-# These parameters are sent to WMM clients when they associate.
-# The parameters will be used by WMM clients for frames transmitted to the
-# access point.
-#
-# note - txop_limit is in units of 32microseconds
-# note - acm is admission control mandatory flag. 0 = admission control not
-# required, 1 = mandatory
-# note - Here cwMin and cmMax are in exponent form. The actual cw value used
-# will be (2^n)-1 where n is the value given here. The allowed range for these
-# wmm_ac_??_{cwmin,cwmax} is 0..15 with cwmax >= cwmin.
-#
-wmm_enabled=1
-
-# Low priority / AC_BK = background
-wmm_ac_bk_cwmin=4
-wmm_ac_bk_cwmax=10
-wmm_ac_bk_aifs=7
-wmm_ac_bk_txop_limit=0
-wmm_ac_bk_acm=0
-# Note: for IEEE 802.11b mode: cWmin=5 cWmax=10
-#
-# Normal priority / AC_BE = best effort
-wmm_ac_be_aifs=3
-wmm_ac_be_cwmin=4
-wmm_ac_be_cwmax=10
-wmm_ac_be_txop_limit=0
-wmm_ac_be_acm=0
-# Note: for IEEE 802.11b mode: cWmin=5 cWmax=7
-#
-# High priority / AC_VI = video
-wmm_ac_vi_aifs=2
-wmm_ac_vi_cwmin=3
-wmm_ac_vi_cwmax=4
-wmm_ac_vi_txop_limit=94
-wmm_ac_vi_acm=0
-# Note: for IEEE 802.11b mode: cWmin=4 cWmax=5 txop_limit=188
-#
-# Highest priority / AC_VO = voice
-wmm_ac_vo_aifs=2
-wmm_ac_vo_cwmin=2
-wmm_ac_vo_cwmax=3
-wmm_ac_vo_txop_limit=47
-wmm_ac_vo_acm=0
-
+### Autogenerated by interfaces-wireless.py ###
+{% if description %}
+# Description: {{ description }}
+# User-friendly description of device; up to 32 octets encoded in UTF-8
+device_name={{ description | truncate(32, True) }}
+{% endif %}
+
+# AP netdevice name (without 'ap' postfix, i.e., wlan0 uses wlan0ap for
+# management frames with the Host AP driver); wlan0 with many nl80211 drivers
+# Note: This attribute can be overridden by the values supplied with the '-i'
+# command line parameter.
+interface={{ intf }}
+
+# Driver interface type (hostap/wired/none/nl80211/bsd);
+# default: hostap). nl80211 is used with all Linux mac80211 drivers.
+# Use driver=none if building hostapd as a standalone RADIUS server that does
+# not control any wireless/wired driver.
+driver=nl80211
+
+# Levels (minimum value for logged events):
+# 0 = verbose debugging
+# 1 = debugging
+# 2 = informational messages
+# 3 = notification
+# 4 = warning
+logger_syslog=-1
+logger_syslog_level=0
+logger_stdout=-1
+logger_stdout_level=0
+
+{%- if country_code %}
+
+# Country code (ISO/IEC 3166-1). Used to set regulatory domain.
+# Set as needed to indicate country in which device is operating.
+# This can limit available channels and transmit power.
+country_code={{ country_code }}
+
+# Enable IEEE 802.11d. This advertises the country_code and the set of allowed
+# channels and transmit power levels based on the regulatory limits. The
+# country_code setting must be configured with the correct country for
+# IEEE 802.11d functions.
+ieee80211d=1
+{% endif %}
+
+{%- if ssid %}
+
+# SSID to be used in IEEE 802.11 management frames
+ssid={{ ssid }}
+{% endif %}
+
+{%- if channel %}
+
+# Channel number (IEEE 802.11)
+# (default: 0, i.e., not set)
+# Please note that some drivers do not use this value from hostapd and the
+# channel will need to be configured separately with iwconfig.
+#
+# If CONFIG_ACS build option is enabled, the channel can be selected
+# automatically at run time by setting channel=acs_survey or channel=0, both of
+# which will enable the ACS survey based algorithm.
+channel={{ channel }}
+{% endif %}
+
+{%- if mode %}
+
+# Operation mode (a = IEEE 802.11a (5 GHz), b = IEEE 802.11b (2.4 GHz),
+# g = IEEE 802.11g (2.4 GHz), ad = IEEE 802.11ad (60 GHz); a/g options are used
+# with IEEE 802.11n (HT), too, to specify band). For IEEE 802.11ac (VHT), this
+# needs to be set to hw_mode=a. For IEEE 802.11ax (HE) on 6 GHz this needs
+# to be set to hw_mode=a. When using ACS (see channel parameter), a
+# special value "any" can be used to indicate that any support band can be used.
+# This special case is currently supported only with drivers with which
+# offloaded ACS is used.
+{% if 'n' in mode -%}
+hw_mode=g
+ieee80211n=1
+{% elif 'ac' in mode -%}
+hw_mode=a
+ieee80211h=1
+ieee80211ac=1
+{% else -%}
+hw_mode={{ mode }}
+{% endif %}
+{% endif %}
+
+# ieee80211w: Whether management frame protection (MFP) is enabled
+# 0 = disabled (default)
+# 1 = optional
+# 2 = required
+{% if 'disabled' in mgmt_frame_protection -%}
+ieee80211w=0
+{% elif 'optional' in mgmt_frame_protection -%}
+ieee80211w=1
+{% elif 'required' in mgmt_frame_protection -%}
+ieee80211w=2
+{% endif %}
+
+# ht_capab: HT capabilities (list of flags)
+# LDPC coding capability: [LDPC] = supported
+# Supported channel width set: [HT40-] = both 20 MHz and 40 MHz with secondary
+# channel below the primary channel; [HT40+] = both 20 MHz and 40 MHz
+# with secondary channel above the primary channel
+# (20 MHz only if neither is set)
+# Note: There are limits on which channels can be used with HT40- and
+# HT40+. Following table shows the channels that may be available for
+# HT40- and HT40+ use per IEEE 802.11n Annex J:
+# freq HT40- HT40+
+# 2.4 GHz 5-13 1-7 (1-9 in Europe/Japan)
+# 5 GHz 40,48,56,64 36,44,52,60
+# (depending on the location, not all of these channels may be available
+# for use)
+# Please note that 40 MHz channels may switch their primary and secondary
+# channels if needed or creation of 40 MHz channel maybe rejected based
+# on overlapping BSSes. These changes are done automatically when hostapd
+# is setting up the 40 MHz channel.
+# Spatial Multiplexing (SM) Power Save: [SMPS-STATIC] or [SMPS-DYNAMIC]
+# (SMPS disabled if neither is set)
+# HT-greenfield: [GF] (disabled if not set)
+# Short GI for 20 MHz: [SHORT-GI-20] (disabled if not set)
+# Short GI for 40 MHz: [SHORT-GI-40] (disabled if not set)
+# Tx STBC: [TX-STBC] (disabled if not set)
+# Rx STBC: [RX-STBC1] (one spatial stream), [RX-STBC12] (one or two spatial
+# streams), or [RX-STBC123] (one, two, or three spatial streams); Rx STBC
+# disabled if none of these set
+# HT-delayed Block Ack: [DELAYED-BA] (disabled if not set)
+# Maximum A-MSDU length: [MAX-AMSDU-7935] for 7935 octets (3839 octets if not
+# set)
+# DSSS/CCK Mode in 40 MHz: [DSSS_CCK-40] = allowed (not allowed if not set)
+# 40 MHz intolerant [40-INTOLERANT] (not advertised if not set)
+# L-SIG TXOP protection support: [LSIG-TXOP-PROT] (disabled if not set)
+{% if cap_ht %}
+ht_capab=
+{%- endif -%}
+
+{%- if cap_ht_40mhz_incapable -%}
+[40-INTOLERANT]
+{%- endif -%}
+
+{%- if cap_ht_delayed_block_ack -%}
+[DELAYED-BA]
+{%- endif -%}
+
+{%- if cap_ht_dsss_cck_40 -%}
+[DSSS_CCK-40]
+{%- endif -%}
+
+{%- if cap_ht_greenfield -%}
+[GF]
+{%- endif -%}
+
+{%- if cap_ht_ldpc -%}
+[LDPC]
+{%- endif -%}
+
+{%- if cap_ht_lsig_protection -%}
+[LSIG-TXOP-PROT]
+{%- endif -%}
+
+{%- if cap_ht_max_amsdu -%}
+[MAX-AMSDU-{{ cap_ht_max_amsdu }}]
+{%- endif -%}
+
+{%- if cap_ht_smps -%}
+[SMPS-{{ cap_ht_smps | upper }}]
+{%- endif -%}
+
+{%- if cap_ht_chan_set_width -%}
+{%- for csw in cap_ht_chan_set_width -%}
+[{{ csw | upper }}]
+{%- endfor -%}
+{%- endif -%}
+
+{%- if cap_ht_short_gi -%}
+{%- for gi in cap_ht_short_gi -%}
+[SHORT-GI-{{ gi }}]
+{%- endfor -%}
+{%- endif -%}
+
+{%- if cap_ht_stbc_tx -%}
+[TX-STBC]
+{%- endif -%}
+{%- if cap_ht_stbc_rx -%}
+[RX-STBC{{ cap_ht_stbc_rx }}]
+{%- endif %}
+
+# Required for full HT and VHT functionality
+wme_enabled=1
+
+{% if cap_ht_powersave -%}
+# WMM-PS Unscheduled Automatic Power Save Delivery [U-APSD]
+# Enable this flag if U-APSD supported outside hostapd (eg., Firmware/driver)
+uapsd_advertisement_enabled=1
+{%- endif %}
+
+{% if cap_req_ht -%}
+# Require stations to support HT PHY (reject association if they do not)
+require_ht=1
+{% endif %}
+
+{%- if cap_vht_chan_set_width -%}
+vht_oper_chwidth={{ cap_vht_chan_set_width }}
+{%- endif -%}
+
+# vht_capab: VHT capabilities (list of flags)
+#
+# vht_max_mpdu_len: [MAX-MPDU-7991] [MAX-MPDU-11454]
+# Indicates maximum MPDU length
+# 0 = 3895 octets (default)
+# 1 = 7991 octets
+# 2 = 11454 octets
+# 3 = reserved
+#
+# supported_chan_width: [VHT160] [VHT160-80PLUS80]
+# Indicates supported Channel widths
+# 0 = 160 MHz & 80+80 channel widths are not supported (default)
+# 1 = 160 MHz channel width is supported
+# 2 = 160 MHz & 80+80 channel widths are supported
+# 3 = reserved
+#
+# Rx LDPC coding capability: [RXLDPC]
+# Indicates support for receiving LDPC coded pkts
+# 0 = Not supported (default)
+# 1 = Supported
+#
+# Short GI for 80 MHz: [SHORT-GI-80]
+# Indicates short GI support for reception of packets transmitted with TXVECTOR
+# params format equal to VHT and CBW = 80Mhz
+# 0 = Not supported (default)
+# 1 = Supported
+#
+# Short GI for 160 MHz: [SHORT-GI-160]
+# Indicates short GI support for reception of packets transmitted with TXVECTOR
+# params format equal to VHT and CBW = 160Mhz
+# 0 = Not supported (default)
+# 1 = Supported
+#
+# Tx STBC: [TX-STBC-2BY1]
+# Indicates support for the transmission of at least 2x1 STBC
+# 0 = Not supported (default)
+# 1 = Supported
+#
+# Rx STBC: [RX-STBC-1] [RX-STBC-12] [RX-STBC-123] [RX-STBC-1234]
+# Indicates support for the reception of PPDUs using STBC
+# 0 = Not supported (default)
+# 1 = support of one spatial stream
+# 2 = support of one and two spatial streams
+# 3 = support of one, two and three spatial streams
+# 4 = support of one, two, three and four spatial streams
+# 5,6,7 = reserved
+#
+# SU Beamformer Capable: [SU-BEAMFORMER]
+# Indicates support for operation as a single user beamformer
+# 0 = Not supported (default)
+# 1 = Supported
+#
+# SU Beamformee Capable: [SU-BEAMFORMEE]
+# Indicates support for operation as a single user beamformee
+# 0 = Not supported (default)
+# 1 = Supported
+#
+# Compressed Steering Number of Beamformer Antennas Supported:
+# [BF-ANTENNA-2] [BF-ANTENNA-3] [BF-ANTENNA-4]
+# Beamformee's capability indicating the maximum number of beamformer
+# antennas the beamformee can support when sending compressed beamforming
+# feedback
+# If SU beamformer capable, set to maximum value minus 1
+# else reserved (default)
+#
+# Number of Sounding Dimensions:
+# [SOUNDING-DIMENSION-2] [SOUNDING-DIMENSION-3] [SOUNDING-DIMENSION-4]
+# Beamformer's capability indicating the maximum value of the NUM_STS parameter
+# in the TXVECTOR of a VHT NDP
+# If SU beamformer capable, set to maximum value minus 1
+# else reserved (default)
+#
+# MU Beamformer Capable: [MU-BEAMFORMER]
+# Indicates support for operation as an MU beamformer
+# 0 = Not supported or sent by Non-AP STA (default)
+# 1 = Supported
+#
+# VHT TXOP PS: [VHT-TXOP-PS]
+# Indicates whether or not the AP supports VHT TXOP Power Save Mode
+# or whether or not the STA is in VHT TXOP Power Save mode
+# 0 = VHT AP doesn't support VHT TXOP PS mode (OR) VHT STA not in VHT TXOP PS
+# mode
+# 1 = VHT AP supports VHT TXOP PS mode (OR) VHT STA is in VHT TXOP power save
+# mode
+#
+# +HTC-VHT Capable: [HTC-VHT]
+# Indicates whether or not the STA supports receiving a VHT variant HT Control
+# field.
+# 0 = Not supported (default)
+# 1 = supported
+#
+# Maximum A-MPDU Length Exponent: [MAX-A-MPDU-LEN-EXP0]..[MAX-A-MPDU-LEN-EXP7]
+# Indicates the maximum length of A-MPDU pre-EOF padding that the STA can recv
+# This field is an integer in the range of 0 to 7.
+# The length defined by this field is equal to
+# 2 pow(13 + Maximum A-MPDU Length Exponent) -1 octets
+#
+# VHT Link Adaptation Capable: [VHT-LINK-ADAPT2] [VHT-LINK-ADAPT3]
+# Indicates whether or not the STA supports link adaptation using VHT variant
+# HT Control field
+# If +HTC-VHTcapable is 1
+# 0 = (no feedback) if the STA does not provide VHT MFB (default)
+# 1 = reserved
+# 2 = (Unsolicited) if the STA provides only unsolicited VHT MFB
+# 3 = (Both) if the STA can provide VHT MFB in response to VHT MRQ and if the
+# STA provides unsolicited VHT MFB
+# Reserved if +HTC-VHTcapable is 0
+#
+# Rx Antenna Pattern Consistency: [RX-ANTENNA-PATTERN]
+# Indicates the possibility of Rx antenna pattern change
+# 0 = Rx antenna pattern might change during the lifetime of an association
+# 1 = Rx antenna pattern does not change during the lifetime of an association
+#
+# Tx Antenna Pattern Consistency: [TX-ANTENNA-PATTERN]
+# Indicates the possibility of Tx antenna pattern change
+# 0 = Tx antenna pattern might change during the lifetime of an association
+# 1 = Tx antenna pattern does not change during the lifetime of an association
+{% if cap_vht %}
+vht_capab=
+{%- endif -%}
+
+{%- if cap_vht_max_mpdu -%}
+[MAX-MPDU-{{ cap_vht_max_mpdu }}]
+{%- endif -%}
+
+{%- if cap_vht_max_mpdu_exp -%}
+[MAX-A-MPDU-LEN-EXP{{ cap_vht_max_mpdu_exp }}]
+{%- endif -%}
+
+{%- if cap_vht_chan_set_width -%}
+{%- if '2' in cap_vht_chan_set_width -%}
+[VHT160]
+{%- elif '3' in cap_vht_chan_set_width -%}
+[VHT160-80PLUS80]
+{%- endif -%}
+{%- endif -%}
+
+{%- if cap_vht_stbc_tx -%}
+[TX-STBC-2BY1]
+{%- endif -%}
+
+{%- if cap_vht_stbc_rx -%}
+[RX-STBC-{{ cap_vht_stbc_rx }}]
+{%- endif -%}
+
+{%- if cap_vht_link_adaptation -%}
+{%- if 'unsolicited' in cap_vht_link_adaptation -%}
+[VHT-LINK-ADAPT2]
+{%- elif 'both' in cap_vht_link_adaptation -%}
+[VHT-LINK-ADAPT3]
+{%- endif -%}
+{%- endif -%}
+
+{%- if cap_vht_short_gi -%}
+{%- for gi in cap_vht_short_gi -%}
+[SHORT-GI-{{ gi }}]
+{%- endfor -%}
+{%- endif -%}
+
+{%- if cap_vht_ldpc -%}
+[RXLDPC]
+{%- endif -%}
+
+{%- if cap_vht_tx_powersave -%}
+[VHT-TXOP-PS]
+{%- endif -%}
+
+{%- if cap_vht_vht_cf -%}
+[HTC-VHT]
+{%- endif -%}
+
+{%- if cap_vht_beamform -%}
+{%- for beamform in cap_vht_beamform -%}
+{%- if 'single-user-beamformer' in beamform -%}
+[SU-BEAMFORMER]
+{%- elif 'single-user-beamformee' in beamform -%}
+[SU-BEAMFORMEE]
+{%- elif 'multi-user-beamformer' in beamform -%}
+[MU-BEAMFORMER]
+{%- elif 'multi-user-beamformee' in beamform -%}
+[MU-BEAMFORMEE]
+{%- endif -%}
+{%- endfor -%}
+{%- endif -%}
+
+{%- if cap_vht_antenna_fixed -%}
+[RX-ANTENNA-PATTERN][TX-ANTENNA-PATTERN]
+{%- endif -%}
+
+{%- if cap_vht_antenna_cnt -%}
+{%- for beamform in cap_vht_beamform -%}
+{%- if 'single-user-beamformer' in beamform -%}
+[BF-ANTENNA-{{ cap_vht_antenna_cnt|int -1 }}][SOUNDING-DIMENSION-{{ cap_vht_antenna_cnt|int -1}}]
+{%- else -%}
+[BF-ANTENNA-{{ cap_vht_antenna_cnt }}][SOUNDING-DIMENSION-{{ cap_vht_antenna_cnt }}]
+{%- endif -%}
+{%- endfor -%}
+{%- endif %}
+
+# ieee80211n: Whether IEEE 802.11n (HT) is enabled
+# 0 = disabled (default)
+# 1 = enabled
+# Note: You will also need to enable WMM for full HT functionality.
+# Note: hw_mode=g (2.4 GHz) and hw_mode=a (5 GHz) is used to specify the band.
+{% if cap_req_vht -%}
+ieee80211n=0
+# Require stations to support VHT PHY (reject association if they do not)
+require_vht=1
+{% endif %}
+
+{% if cap_vht_center_freq_1 -%}
+# center freq = 5 GHz + (5 * index)
+# So index 42 gives center freq 5.210 GHz
+# which is channel 42 in 5G band
+vht_oper_centr_freq_seg0_idx={{ cap_vht_center_freq_1 }}
+{% endif %}
+
+{% if cap_vht_center_freq_2 -%}
+# center freq = 5 GHz + (5 * index)
+# So index 159 gives center freq 5.795 GHz
+# which is channel 159 in 5G band
+vht_oper_centr_freq_seg1_idx={{ cap_vht_center_freq_2 }}
+{% endif %}
+
+{% if disable_broadcast_ssid -%}
+# Send empty SSID in beacons and ignore probe request frames that do not
+# specify full SSID, i.e., require stations to know SSID.
+# default: disabled (0)
+# 1 = send empty (length=0) SSID in beacon and ignore probe request for
+# broadcast SSID
+# 2 = clear SSID (ASCII 0), but keep the original length (this may be required
+# with some clients that do not support empty SSID) and ignore probe
+# requests for broadcast SSID
+ignore_broadcast_ssid=1
+{% endif %}
+
+# Station MAC address -based authentication
+# Please note that this kind of access control requires a driver that uses
+# hostapd to take care of management frame processing and as such, this can be
+# used with driver=hostap or driver=nl80211, but not with driver=atheros.
+# 0 = accept unless in deny list
+# 1 = deny unless in accept list
+# 2 = use external RADIUS server (accept/deny lists are searched first)
+macaddr_acl=0
+
+{% if max_stations -%}
+# Maximum number of stations allowed in station table. New stations will be
+# rejected after the station table is full. IEEE 802.11 has a limit of 2007
+# different association IDs, so this number should not be larger than that.
+# (default: 2007)
+max_num_sta={{ max_stations }}
+{% endif %}
+
+{% if isolate_stations -%}
+# Client isolation can be used to prevent low-level bridging of frames between
+# associated stations in the BSS. By default, this bridging is allowed.
+ap_isolate=1
+{% endif %}
+
+{% if reduce_transmit_power -%}
+# Add Power Constraint element to Beacon and Probe Response frames
+# This config option adds Power Constraint element when applicable and Country
+# element is added. Power Constraint element is required by Transmit Power
+# Control. This can be used only with ieee80211d=1.
+# Valid values are 0..255.
+local_pwr_constraint={{ reduce_transmit_power }}
+{% endif %}
+
+{% if expunge_failing_stations -%}
+# Disassociate stations based on excessive transmission failures or other
+# indications of connection loss. This depends on the driver capabilities and
+# may not be available with all drivers.
+disassoc_low_ack=1
+{% endif %}
+
+{% if sec_wep -%}
+# IEEE 802.11 specifies two authentication algorithms. hostapd can be
+# configured to allow both of these or only one. Open system authentication
+# should be used with IEEE 802.1X.
+# Bit fields of allowed authentication algorithms:
+# bit 0 = Open System Authentication
+# bit 1 = Shared Key Authentication (requires WEP)
+auth_algs=2
+
+# WEP rekeying (disabled if key lengths are not set or are set to 0)
+# Key lengths for default/broadcast and individual/unicast keys:
+# 5 = 40-bit WEP (also known as 64-bit WEP with 40 secret bits)
+# 13 = 104-bit WEP (also known as 128-bit WEP with 104 secret bits)
+wep_key_len_broadcast=5
+wep_key_len_unicast=5
+
+# Static WEP key configuration
+#
+# The key number to use when transmitting.
+# It must be between 0 and 3, and the corresponding key must be set.
+# default: not set
+wep_default_key=0
+
+# The WEP keys to use.
+# A key may be a quoted string or unquoted hexadecimal digits.
+# The key length should be 5, 13, or 16 characters, or 10, 26, or 32
+# digits, depending on whether 40-bit (64-bit), 104-bit (128-bit), or
+# 128-bit (152-bit) WEP is used.
+# Only the default key must be supplied; the others are optional.
+{% if sec_wep_key -%}
+{% for key in sec_wep_key -%}
+wep_key{{ loop.index -1 }}={{ key}}
+{% endfor %}
+{%- endif %}
+
+{% elif sec_wpa -%}
+##### WPA/IEEE 802.11i configuration ##########################################
+
+# Enable WPA. Setting this variable configures the AP to require WPA (either
+# WPA-PSK or WPA-RADIUS/EAP based on other configuration). For WPA-PSK, either
+# wpa_psk or wpa_passphrase must be set and wpa_key_mgmt must include WPA-PSK.
+# Instead of wpa_psk / wpa_passphrase, wpa_psk_radius might suffice.
+# For WPA-RADIUS/EAP, ieee8021x must be set (but without dynamic WEP keys),
+# RADIUS authentication server must be configured, and WPA-EAP must be included
+# in wpa_key_mgmt.
+# This field is a bit field that can be used to enable WPA (IEEE 802.11i/D3.0)
+# and/or WPA2 (full IEEE 802.11i/RSN):
+# bit0 = WPA
+# bit1 = IEEE 802.11i/RSN (WPA2) (dot11RSNAEnabled)
+{% if 'both' in sec_wpa_mode -%}
+wpa=3
+{%- elif 'wpa2' in sec_wpa_mode -%}
+wpa=2
+{%- elif 'wpa' in sec_wpa_mode -%}
+wpa=1
+{%- endif %}
+
+{% if sec_wpa_cipher -%}
+# Set of accepted cipher suites (encryption algorithms) for pairwise keys
+# (unicast packets). This is a space separated list of algorithms:
+# CCMP = AES in Counter mode with CBC-MAC (CCMP-128)
+# TKIP = Temporal Key Integrity Protocol
+# CCMP-256 = AES in Counter mode with CBC-MAC with 256-bit key
+# GCMP = Galois/counter mode protocol (GCMP-128)
+# GCMP-256 = Galois/counter mode protocol with 256-bit key
+# Group cipher suite (encryption algorithm for broadcast and multicast frames)
+# is automatically selected based on this configuration. If only CCMP is
+# allowed as the pairwise cipher, group cipher will also be CCMP. Otherwise,
+# TKIP will be used as the group cipher. The optional group_cipher parameter can
+# be used to override this automatic selection.
+{% if 'wpa2' in sec_wpa_mode -%}
+# Pairwise cipher for RSN/WPA2 (default: use wpa_pairwise value)
+rsn_pairwise={{ sec_wpa_cipher | join(" ") }}
+{% else -%}
+# Pairwise cipher for WPA (v1) (default: TKIP)
+wpa_pairwise={{ sec_wpa_cipher | join(" ") }}
+{%- endif -%}
+{% endif %}
+
+{% if sec_wpa_passphrase -%}
+# IEEE 802.11 specifies two authentication algorithms. hostapd can be
+# configured to allow both of these or only one. Open system authentication
+# should be used with IEEE 802.1X.
+# Bit fields of allowed authentication algorithms:
+# bit 0 = Open System Authentication
+# bit 1 = Shared Key Authentication (requires WEP)
+auth_algs=1
+
+# WPA pre-shared keys for WPA-PSK. This can be either entered as a 256-bit
+# secret in hex format (64 hex digits), wpa_psk, or as an ASCII passphrase
+# (8..63 characters) that will be converted to PSK. This conversion uses SSID
+# so the PSK changes when ASCII passphrase is used and the SSID is changed.
+wpa_passphrase={{ sec_wpa_passphrase }}
+
+# Set of accepted key management algorithms (WPA-PSK, WPA-EAP, or both). The
+# entries are separated with a space. WPA-PSK-SHA256 and WPA-EAP-SHA256 can be
+# added to enable SHA256-based stronger algorithms.
+# WPA-PSK = WPA-Personal / WPA2-Personal
+# WPA-PSK-SHA256 = WPA2-Personal using SHA256
+wpa_key_mgmt=WPA-PSK
+
+{% elif sec_wpa_radius -%}
+##### IEEE 802.1X-2004 related configuration ##################################
+# Require IEEE 802.1X authorization
+ieee8021x=1
+
+# Set of accepted key management algorithms (WPA-PSK, WPA-EAP, or both). The
+# entries are separated with a space. WPA-PSK-SHA256 and WPA-EAP-SHA256 can be
+# added to enable SHA256-based stronger algorithms.
+# WPA-EAP = WPA-Enterprise / WPA2-Enterprise
+# WPA-EAP-SHA256 = WPA2-Enterprise using SHA256
+wpa_key_mgmt=WPA-EAP
+
+{% if sec_wpa_radius_source -%}
+# RADIUS client forced local IP address for the access point
+# Normally the local IP address is determined automatically based on configured
+# IP addresses, but this field can be used to force a specific address to be
+# used, e.g., when the device has multiple IP addresses.
+radius_client_addr={{ sec_wpa_radius_source }}
+
+# The own IP address of the access point (used as NAS-IP-Address)
+own_ip_addr={{ sec_wpa_radius_source }}
+{% else %}
+# The own IP address of the access point (used as NAS-IP-Address)
+own_ip_addr=127.0.0.1
+{% endif %}
+
+{% for radius in sec_wpa_radius -%}
+{%- if not radius.disabled -%}
+# RADIUS authentication server
+auth_server_addr={{ radius.server }}
+auth_server_port={{ radius.port }}
+auth_server_shared_secret={{ radius.key }}
+{% if radius.acc_port -%}
+# RADIUS accounting server
+acct_server_addr={{ radius.server }}
+acct_server_port={{ radius.acc_port }}
+acct_server_shared_secret={{ radius.key }}
+{% endif %}
+{% endif %}
+{% endfor %}
+
+{% endif %}
+
+{% else %}
+# Open system
+auth_algs=1
+{% endif %}
+
+# TX queue parameters (EDCF / bursting)
+# tx_queue_<queue name>_<param>
+# queues: data0, data1, data2, data3
+# (data0 is the highest priority queue)
+# parameters:
+# aifs: AIFS (default 2)
+# cwmin: cwMin (1, 3, 7, 15, 31, 63, 127, 255, 511, 1023, 2047, 4095, 8191,
+# 16383, 32767)
+# cwmax: cwMax (same values as cwMin, cwMax >= cwMin)
+# burst: maximum length (in milliseconds with precision of up to 0.1 ms) for
+# bursting
+#
+# Default WMM parameters (IEEE 802.11 draft; 11-03-0504-03-000e):
+# These parameters are used by the access point when transmitting frames
+# to the clients.
+#
+# Low priority / AC_BK = background
+tx_queue_data3_aifs=7
+tx_queue_data3_cwmin=15
+tx_queue_data3_cwmax=1023
+tx_queue_data3_burst=0
+# Note: for IEEE 802.11b mode: cWmin=31 cWmax=1023 burst=0
+#
+# Normal priority / AC_BE = best effort
+tx_queue_data2_aifs=3
+tx_queue_data2_cwmin=15
+tx_queue_data2_cwmax=63
+tx_queue_data2_burst=0
+# Note: for IEEE 802.11b mode: cWmin=31 cWmax=127 burst=0
+#
+# High priority / AC_VI = video
+tx_queue_data1_aifs=1
+tx_queue_data1_cwmin=7
+tx_queue_data1_cwmax=15
+tx_queue_data1_burst=3.0
+# Note: for IEEE 802.11b mode: cWmin=15 cWmax=31 burst=6.0
+#
+# Highest priority / AC_VO = voice
+tx_queue_data0_aifs=1
+tx_queue_data0_cwmin=3
+tx_queue_data0_cwmax=7
+tx_queue_data0_burst=1.5
+
+# Default WMM parameters (IEEE 802.11 draft; 11-03-0504-03-000e):
+# for 802.11a or 802.11g networks
+# These parameters are sent to WMM clients when they associate.
+# The parameters will be used by WMM clients for frames transmitted to the
+# access point.
+#
+# note - txop_limit is in units of 32microseconds
+# note - acm is admission control mandatory flag. 0 = admission control not
+# required, 1 = mandatory
+# note - Here cwMin and cmMax are in exponent form. The actual cw value used
+# will be (2^n)-1 where n is the value given here. The allowed range for these
+# wmm_ac_??_{cwmin,cwmax} is 0..15 with cwmax >= cwmin.
+#
+wmm_enabled=1
+
+# Low priority / AC_BK = background
+wmm_ac_bk_cwmin=4
+wmm_ac_bk_cwmax=10
+wmm_ac_bk_aifs=7
+wmm_ac_bk_txop_limit=0
+wmm_ac_bk_acm=0
+# Note: for IEEE 802.11b mode: cWmin=5 cWmax=10
+#
+# Normal priority / AC_BE = best effort
+wmm_ac_be_aifs=3
+wmm_ac_be_cwmin=4
+wmm_ac_be_cwmax=10
+wmm_ac_be_txop_limit=0
+wmm_ac_be_acm=0
+# Note: for IEEE 802.11b mode: cWmin=5 cWmax=7
+#
+# High priority / AC_VI = video
+wmm_ac_vi_aifs=2
+wmm_ac_vi_cwmin=3
+wmm_ac_vi_cwmax=4
+wmm_ac_vi_txop_limit=94
+wmm_ac_vi_acm=0
+# Note: for IEEE 802.11b mode: cWmin=4 cWmax=5 txop_limit=188
+#
+# Highest priority / AC_VO = voice
+wmm_ac_vo_aifs=2
+wmm_ac_vo_cwmin=2
+wmm_ac_vo_cwmax=3
+wmm_ac_vo_txop_limit=47
+wmm_ac_vo_acm=0
+
diff --git a/data/templates/wifi/wpa_supplicant.conf.tmpl b/data/templates/wifi/wpa_supplicant.conf.tmpl
index 4a14cd309..2784883f1 100644
--- a/data/templates/wifi/wpa_supplicant.conf.tmpl
+++ b/data/templates/wifi/wpa_supplicant.conf.tmpl
@@ -1,9 +1,9 @@
-# WPA supplicant config
-network={
- ssid="{{ ssid }}"
-{%- if sec_wpa_passphrase %}
- psk="{{ sec_wpa_passphrase }}"
-{% else %}
- key_mgmt=NONE
-{% endif %}
-}
+# WPA supplicant config
+network={
+ ssid="{{ ssid }}"
+{%- if sec_wpa_passphrase %}
+ psk="{{ sec_wpa_passphrase }}"
+{% else %}
+ key_mgmt=NONE
+{% endif %}
+}
diff --git a/data/templates/wwan/chat.tmpl b/data/templates/wwan/chat.tmpl
index 78453bc5b..a3395c057 100644
--- a/data/templates/wwan/chat.tmpl
+++ b/data/templates/wwan/chat.tmpl
@@ -1,6 +1,6 @@
-ABORT 'NO DIAL TONE' ABORT 'NO ANSWER' ABORT 'NO CARRIER' ABORT DELAYED
-'' AT
-OK ATZ
-OK 'AT+CGDCONT=1,"IP","{{ apn }}"'
-OK ATD*99#
-CONNECT ''
+ABORT 'NO DIAL TONE' ABORT 'NO ANSWER' ABORT 'NO CARRIER' ABORT DELAYED
+'' AT
+OK ATZ
+OK 'AT+CGDCONT=1,"IP","{{ apn }}"'
+OK ATD*99#
+CONNECT ''
diff --git a/data/templates/wwan/ip-pre-up.script.tmpl b/data/templates/wwan/ip-pre-up.script.tmpl
index f20c75ea3..7a17a1c71 100644
--- a/data/templates/wwan/ip-pre-up.script.tmpl
+++ b/data/templates/wwan/ip-pre-up.script.tmpl
@@ -1,23 +1,23 @@
-#!/bin/sh
-# As WWAN is an "on demand" interface we need to re-configure it when it
-# becomes 'up'
-
-ipparam=$6
-
-# device name and metric are received using ipparam
-device=`echo "$ipparam"|awk '{ print $1 }'`
-
-if [ "$device" != "{{ intf }}" ]; then
- exit
-fi
-
-# add some info to syslog
-DIALER_PID=$(cat /var/run/{{ intf }}.pid)
-logger -t pppd[$DIALER_PID] "executing $0"
-
-echo "{{ description }}" > /sys/class/net/{{ intf }}/ifalias
-
-{% if vrf -%}
-logger -t pppd[$DIALER_PID] "configuring interface {{ intf }} for VRF {{ vrf }}"
-ip link set dev {{ intf }} master {{ vrf }}
-{% endif %}
+#!/bin/sh
+# As WWAN is an "on demand" interface we need to re-configure it when it
+# becomes 'up'
+
+ipparam=$6
+
+# device name and metric are received using ipparam
+device=`echo "$ipparam"|awk '{ print $1 }'`
+
+if [ "$device" != "{{ intf }}" ]; then
+ exit
+fi
+
+# add some info to syslog
+DIALER_PID=$(cat /var/run/{{ intf }}.pid)
+logger -t pppd[$DIALER_PID] "executing $0"
+
+echo "{{ description }}" > /sys/class/net/{{ intf }}/ifalias
+
+{% if vrf -%}
+logger -t pppd[$DIALER_PID] "configuring interface {{ intf }} for VRF {{ vrf }}"
+ip link set dev {{ intf }} master {{ vrf }}
+{% endif %}