summaryrefslogtreecommitdiff
path: root/mibs/DISMAN-TRACEROUTE-MIB.txt
diff options
context:
space:
mode:
authorChristian Poessinger <christian@poessinger.com>2021-06-22 18:34:21 +0200
committerChristian Poessinger <christian@poessinger.com>2021-06-22 18:34:58 +0200
commit47604c76587cc6cb7742e91940de2f40ad6d7eb0 (patch)
tree719d4d06886b6c4855e3940781778a33ca4f19d3 /mibs/DISMAN-TRACEROUTE-MIB.txt
parentdebd7996f89b01fa8d3584efbcda9a5675ee4344 (diff)
downloadvyos-1x-47604c76587cc6cb7742e91940de2f40ad6d7eb0.tar.gz
vyos-1x-47604c76587cc6cb7742e91940de2f40ad6d7eb0.zip
snmp: T3606: Install MIBs into well known location
FRR also expects the MIBs in /usr/share/snmp/mibs
Diffstat (limited to 'mibs/DISMAN-TRACEROUTE-MIB.txt')
-rw-r--r--mibs/DISMAN-TRACEROUTE-MIB.txt1850
1 files changed, 1850 insertions, 0 deletions
diff --git a/mibs/DISMAN-TRACEROUTE-MIB.txt b/mibs/DISMAN-TRACEROUTE-MIB.txt
new file mode 100644
index 000000000..d207b2455
--- /dev/null
+++ b/mibs/DISMAN-TRACEROUTE-MIB.txt
@@ -0,0 +1,1850 @@
+DISMAN-TRACEROUTE-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE, Integer32,
+ Gauge32, Unsigned32, mib-2,
+ NOTIFICATION-TYPE,
+ OBJECT-IDENTITY
+ FROM SNMPv2-SMI -- RFC2578
+ RowStatus, StorageType,
+ TruthValue, DateAndTime
+ FROM SNMPv2-TC -- RFC2579
+ MODULE-COMPLIANCE, OBJECT-GROUP,
+ NOTIFICATION-GROUP
+ FROM SNMPv2-CONF -- RFC2580
+ SnmpAdminString
+ FROM SNMP-FRAMEWORK-MIB -- RFC3411
+ InterfaceIndexOrZero -- RFC2863
+ FROM IF-MIB
+ InetAddressType, InetAddress
+ FROM INET-ADDRESS-MIB -- RFC4001
+ OperationResponseStatus
+ FROM DISMAN-PING-MIB; -- RFC4560
+
+ traceRouteMIB MODULE-IDENTITY
+ LAST-UPDATED "200606130000Z" -- 13 June 2006
+ ORGANIZATION "IETF Distributed Management Working Group"
+ CONTACT-INFO
+ "Juergen Quittek
+
+ NEC Europe Ltd.
+ Network Laboratories
+ Kurfuersten-Anlage 36
+ 69115 Heidelberg
+ Germany
+
+ Phone: +49 6221 4342-115
+ Email: quittek@netlab.nec.de"
+ DESCRIPTION
+ "The Traceroute MIB (DISMAN-TRACEROUTE-MIB) provides
+ access to the traceroute capability at a remote host.
+
+ Copyright (C) The Internet Society (2006). This version of
+ this MIB module is part of RFC 4560; see the RFC itself for
+ full legal notices."
+
+ -- Revision history
+
+ REVISION "200606130000Z" -- 13 June 2006
+ DESCRIPTION
+ "Updated version, published as RFC 4560.
+ - Correctly considered IPv6 in DESCRIPTION clause of
+ object traceRouteCtlDataSize
+ - Replaced references to RFC 2575 by RFC 3415
+ - Replaced references to RFC 2571 by RFC 3411
+ - Replaced references to RFC 2851 by RFC 4001
+ - Clarified DESCRIPTION clause of object
+ traceRouteResultsLastGoodPath
+ - Changed range of object traceRouteCtlInitialTtl
+ from (0..255) to (1..255)
+ - Extended DESCRIPTION clause of traceRouteResultsTable
+ describing re-initialization of entries
+ - Changed SYNTAX of traceRouteResultsTestAttempts and
+ traceRouteResultsTestSuccesses from Unsigned32 to
+ Gauge32
+ - Changed status of traceRouteCompliance to deprecated
+ - Added traceRouteFullCompliance and
+ traceRouteMinimumCompliance
+ - Changed status of traceRouteGroup and
+ traceRouteTimeStampGroup to deprecated
+ - Added traceRouteMinimumGroup,
+ traceRouteCtlRowStatusGroup, and
+ traceRouteHistoryGroup
+ - Changed DEFVAL of object
+ traceRouteCtlTargetAddressType from { ipv4 }
+ to { unknown }
+ - Changed DEFVAL of object traceRouteCtlDescr
+ from { '00'H } to { ''H }
+ - Added DEFVAL for object traceRouteCtlTrapGeneration
+ of DEFVAL { { } }"
+ REVISION "200009210000Z" -- 21 September 2000
+ DESCRIPTION
+ "Initial version, published as RFC 2925."
+ ::= { mib-2 81 }
+
+ -- Top level structure of the MIB
+
+ traceRouteNotifications OBJECT IDENTIFIER ::= { traceRouteMIB 0 }
+ traceRouteObjects OBJECT IDENTIFIER ::= { traceRouteMIB 1 }
+ traceRouteConformance OBJECT IDENTIFIER ::= { traceRouteMIB 2 }
+
+ -- The registration node (point) for traceroute implementation types
+
+ traceRouteImplementationTypeDomains OBJECT IDENTIFIER
+ ::= { traceRouteMIB 3 }
+
+ traceRouteUsingUdpProbes OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "Indicates that an implementation is using UDP probes to
+ perform the traceroute operation."
+ ::= { traceRouteImplementationTypeDomains 1 }
+
+ -- Simple Object Definitions
+
+ traceRouteMaxConcurrentRequests OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "requests"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The maximum number of concurrent active traceroute requests
+ that are allowed within an agent implementation. A value
+ of 0 for this object implies that there is no limit for
+ the number of concurrent active requests in effect.
+
+ The limit applies only to new requests being activated.
+ When a new value is set, the agent will continue processing
+ all the requests already active, even if their number
+ exceeds the limit just imposed."
+ DEFVAL { 10 }
+ ::= { traceRouteObjects 1 }
+
+ -- Traceroute Control Table
+
+ traceRouteCtlTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF TraceRouteCtlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Defines the Remote Operations Traceroute Control Table for
+ providing the capability of invoking traceroute from a remote
+ host. The results of traceroute operations can be stored in
+ the traceRouteResultsTable, traceRouteProbeHistoryTable, and
+ the traceRouteHopsTable."
+ ::= { traceRouteObjects 2 }
+
+ traceRouteCtlEntry OBJECT-TYPE
+ SYNTAX TraceRouteCtlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Defines an entry in the traceRouteCtlTable. The first
+ index element, traceRouteCtlOwnerIndex, is of type
+ SnmpAdminString, a textual convention that allows for
+ use of the SNMPv3 View-Based Access Control Model
+ (RFC 3415, VACM) and that allows a management
+ application to identify its entries. The second index,
+ traceRouteCtlTestName (also an SnmpAdminString),
+ enables the same management application to have
+ multiple requests outstanding."
+ INDEX {
+ traceRouteCtlOwnerIndex,
+ traceRouteCtlTestName
+ }
+ ::= { traceRouteCtlTable 1 }
+
+ TraceRouteCtlEntry ::=
+ SEQUENCE {
+ traceRouteCtlOwnerIndex SnmpAdminString,
+ traceRouteCtlTestName SnmpAdminString,
+ traceRouteCtlTargetAddressType InetAddressType,
+ traceRouteCtlTargetAddress InetAddress,
+ traceRouteCtlByPassRouteTable TruthValue,
+ traceRouteCtlDataSize Unsigned32,
+ traceRouteCtlTimeOut Unsigned32,
+ traceRouteCtlProbesPerHop Unsigned32,
+ traceRouteCtlPort Unsigned32,
+ traceRouteCtlMaxTtl Unsigned32,
+ traceRouteCtlDSField Unsigned32,
+ traceRouteCtlSourceAddressType InetAddressType,
+ traceRouteCtlSourceAddress InetAddress,
+ traceRouteCtlIfIndex InterfaceIndexOrZero,
+ traceRouteCtlMiscOptions SnmpAdminString,
+ traceRouteCtlMaxFailures Unsigned32,
+ traceRouteCtlDontFragment TruthValue,
+ traceRouteCtlInitialTtl Unsigned32,
+ traceRouteCtlFrequency Unsigned32,
+ traceRouteCtlStorageType StorageType,
+ traceRouteCtlAdminStatus INTEGER,
+ traceRouteCtlDescr SnmpAdminString,
+ traceRouteCtlMaxRows Unsigned32,
+ traceRouteCtlTrapGeneration BITS,
+ traceRouteCtlCreateHopsEntries TruthValue,
+ traceRouteCtlType OBJECT IDENTIFIER,
+ traceRouteCtlRowStatus RowStatus
+ }
+
+ traceRouteCtlOwnerIndex OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(0..32))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "To facilitate the provisioning of access control by a
+ security administrator using the View-Based Access
+ Control Model (RFC 3415, VACM) for tables in which
+ multiple users may need to create or
+ modify entries independently, the initial index is used as
+ an 'owner index'. Such an initial index has a syntax of
+ SnmpAdminString and can thus be trivially mapped to a
+ securityName or groupName defined in VACM, in
+ accordance with a security policy.
+
+ When used in conjunction with such a security policy,
+ all entries in the table belonging to a particular user
+ (or group) will have the same value for this initial
+ index. For a given user's entries in a particular
+ table, the object identifiers for the information in
+ these entries will have the same subidentifiers (except
+ for the 'column' subidentifier) up to the end of the
+ encoded owner index. To configure VACM to permit access
+ to this portion of the table, one would create
+ vacmViewTreeFamilyTable entries with the value of
+ vacmViewTreeFamilySubtree including the owner index
+ portion, and vacmViewTreeFamilyMask 'wildcarding' the
+ column subidentifier. More elaborate configurations
+ are possible."
+ ::= { traceRouteCtlEntry 1 }
+
+ traceRouteCtlTestName OBJECT-TYPE
+ SYNTAX SnmpAdminString (SIZE(0..32))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The name of a traceroute test. This is locally unique,
+ within the scope of a traceRouteCtlOwnerIndex."
+ ::= { traceRouteCtlEntry 2 }
+
+ traceRouteCtlTargetAddressType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the type of host address to be used on the
+ traceroute request at the remote host."
+ DEFVAL { unknown }
+ ::= { traceRouteCtlEntry 3 }
+
+ traceRouteCtlTargetAddress OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the host address used on the
+ traceroute request at the remote host. The
+ host address type can be determined by
+ examining the value of the corresponding
+ traceRouteCtlTargetAddressType.
+
+ A value for this object MUST be set prior to
+ transitioning its corresponding traceRouteCtlEntry to
+ active(1) via traceRouteCtlRowStatus."
+ ::= { traceRouteCtlEntry 4 }
+
+ traceRouteCtlByPassRouteTable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The purpose of this object is to enable optional
+ bypassing the route table. If enabled, the remote
+ host will bypass the normal routing tables and send
+ directly to a host on an attached network. If the
+ host is not on a directly attached network, an
+ error is returned. This option can be used to perform
+ the traceroute operation to a local host through an
+ interface that has no route defined (e.g., after the
+ interface was dropped by the routing daemon at the host)."
+ DEFVAL { false }
+ ::= { traceRouteCtlEntry 5 }
+
+ traceRouteCtlDataSize OBJECT-TYPE
+ SYNTAX Unsigned32 (0..65507)
+ UNITS "octets"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the size of the data portion of a traceroute
+ request, in octets. If the RECOMMENDED traceroute method
+ (UDP datagrams as probes) is used, then the value
+ contained in this object MUST be applied. If another
+ traceroute method is used for which the specified size
+ is not appropriate, then the implementation SHOULD use
+ whatever size (appropriate to the method) is closest to
+ the specified size.
+
+ The maximum value for this object was computed by
+ subtracting the smallest possible IP header size of
+ 20 octets (IPv4 header with no options) and the UDP
+ header size of 8 octets from the maximum IP packet size.
+ An IP packet has a maximum size of 65535 octets
+ (excluding IPv6 Jumbograms)."
+ DEFVAL { 0 }
+ ::= { traceRouteCtlEntry 6 }
+
+ traceRouteCtlTimeOut OBJECT-TYPE
+ SYNTAX Unsigned32 (1..60)
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the time-out value, in seconds, for
+ a traceroute request."
+ DEFVAL { 3 }
+ ::= { traceRouteCtlEntry 7 }
+
+ traceRouteCtlProbesPerHop OBJECT-TYPE
+ SYNTAX Unsigned32 (1..10)
+ UNITS "probes"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the number of times to reissue a traceroute
+ request with the same time-to-live (TTL) value."
+ DEFVAL { 3 }
+ ::= { traceRouteCtlEntry 8 }
+
+ traceRouteCtlPort OBJECT-TYPE
+ SYNTAX Unsigned32 (1..65535)
+ UNITS "UDP Port"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the (initial) UDP port to send the traceroute
+ request to. A port needs to be specified that is not in
+ use at the destination (target) host. The default
+ value for this object is the IANA assigned port,
+ 33434, for the traceroute function."
+ DEFVAL { 33434 }
+ ::= { traceRouteCtlEntry 9 }
+
+ traceRouteCtlMaxTtl OBJECT-TYPE
+ SYNTAX Unsigned32 (1..255)
+ UNITS "time-to-live value"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the maximum time-to-live value."
+ DEFVAL { 30 }
+ ::= { traceRouteCtlEntry 10 }
+
+ traceRouteCtlDSField OBJECT-TYPE
+ SYNTAX Unsigned32 (0..255)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the value to store in the Type of Service
+ (TOS) octet in the IPv4 header or in the Traffic
+ Class octet in the IPv6 header, respectively, of the
+ IP packet used to encapsulate the traceroute probe.
+
+ The octet to be set in the IP header contains the
+ Differentiated Services (DS) Field in the six most
+ significant bits.
+
+ This option can be used to determine what effect an
+ explicit DS Field setting has on a traceroute response.
+ Not all values are legal or meaningful. A value of 0
+ means that the function represented by this option is
+ not supported. DS Field usage is often not supported
+ by IP implementations, and not all values are supported.
+ Refer to RFC 2474 and RFC 3260 for guidance on usage of
+ this field."
+ REFERENCE
+ "Refer to RFC 1812 for the definition of the IPv4 TOS
+ octet and to RFC 2460 for the definition of the IPv6
+ Traffic Class octet. Refer to RFC 2474 and RFC 3260
+ for the definition of the Differentiated Services Field."
+ DEFVAL { 0 }
+ ::= { traceRouteCtlEntry 11 }
+
+ traceRouteCtlSourceAddressType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Specifies the type of the source address,
+ traceRouteCtlSourceAddress, to be used at a remote host
+ when a traceroute operation is performed."
+ DEFVAL { unknown }
+ ::= { traceRouteCtlEntry 12 }
+
+ traceRouteCtlSourceAddress OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Use the specified IP address (which must be given as an
+ IP number, not a hostname) as the source address in
+ outgoing probe packets. On hosts with more than one IP
+ address, this option can be used to select the address
+ to be used. If the IP address is not one of this
+ machine's interface addresses, an error is returned, and
+ nothing is sent. A zero-length octet string value for
+ this object disables source address specification.
+ The address type (InetAddressType) that relates to
+ this object is specified by the corresponding value
+ of traceRouteCtlSourceAddressType."
+ DEFVAL { ''H }
+ ::= { traceRouteCtlEntry 13 }
+
+ traceRouteCtlIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Setting this object to an interface's ifIndex prior
+ to starting a remote traceroute operation directs
+ the traceroute probes to be transmitted over the
+ specified interface. A value of zero for this object
+ implies that this option is not enabled."
+ DEFVAL { 0 }
+ ::= { traceRouteCtlEntry 14 }
+
+ traceRouteCtlMiscOptions OBJECT-TYPE
+ SYNTAX SnmpAdminString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Enables an application to specify implementation-dependent
+ options."
+ DEFVAL { ''H }
+ ::= { traceRouteCtlEntry 15 }
+
+ traceRouteCtlMaxFailures OBJECT-TYPE
+ SYNTAX Unsigned32 (0..255)
+ UNITS "timeouts"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The value of this object indicates the maximum number
+ of consecutive timeouts allowed before a remote traceroute
+ request is terminated. A value of either 255 (maximum
+ hop count/possible TTL value) or 0 indicates that the
+ function of terminating a remote traceroute request when a
+ specific number of consecutive timeouts are detected is
+ disabled."
+ DEFVAL { 5 }
+ ::= { traceRouteCtlEntry 16 }
+
+ traceRouteCtlDontFragment OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object enables setting of the don't fragment flag (DF)
+ in the IP header for a probe. Use of this object enables
+ a manual PATH MTU test is performed."
+ DEFVAL { false }
+ ::= { traceRouteCtlEntry 17 }
+
+ traceRouteCtlInitialTtl OBJECT-TYPE
+ SYNTAX Unsigned32 (1..255)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The value of this object specifies the initial TTL value to
+ use. This enables bypassing the initial (often well known)
+ portion of a path."
+ DEFVAL { 1 }
+ ::= { traceRouteCtlEntry 18 }
+
+ traceRouteCtlFrequency OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The number of seconds to wait before repeating a
+ traceroute test, as defined by the value of the
+ various objects in the corresponding row.
+
+ After a single test is completed the number of seconds
+ as defined by the value of traceRouteCtlFrequency MUST
+ elapse before the next traceroute test is started.
+
+ A value of 0 for this object implies that the test
+ as defined by the corresponding entry will not be
+
+ repeated."
+ DEFVAL { 0 }
+ ::= { traceRouteCtlEntry 19 }
+
+ traceRouteCtlStorageType OBJECT-TYPE
+ SYNTAX StorageType
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The storage type for this conceptual row.
+ Conceptual rows having the value 'permanent' need not
+ allow write-access to any columnar objects in the row."
+ DEFVAL { nonVolatile }
+ ::= { traceRouteCtlEntry 20 }
+
+ traceRouteCtlAdminStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+
+ enabled(1), -- operation should be started
+ disabled(2) -- operation should be stopped
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Reflects the desired state that an traceRouteCtlEntry
+ should be in:
+
+ enabled(1) - Attempt to activate the test as defined by
+ this traceRouteCtlEntry.
+ disabled(2) - Deactivate the test as defined by this
+ traceRouteCtlEntry.
+
+ Refer to the corresponding traceRouteResultsOperStatus to
+ determine the operational state of the test defined by
+ this entry."
+ DEFVAL { disabled }
+ ::= { traceRouteCtlEntry 21 }
+
+ traceRouteCtlDescr OBJECT-TYPE
+ SYNTAX SnmpAdminString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The purpose of this object is to provide a
+ descriptive name of the remote traceroute
+ test."
+ DEFVAL { ''H }
+ ::= { traceRouteCtlEntry 22 }
+
+ traceRouteCtlMaxRows OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "rows"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The maximum number of corresponding entries allowed
+ in the traceRouteProbeHistoryTable. An implementation
+ of this MIB will remove the oldest corresponding entry
+ in the traceRouteProbeHistoryTable to allow the
+ addition of an new entry once the number of
+ corresponding rows in the traceRouteProbeHistoryTable
+ reaches this value.
+
+ Old entries are not removed when a new test is
+ started. Entries are added to the
+ traceRouteProbeHistoryTable until traceRouteCtlMaxRows
+ is reached before entries begin to be removed.
+ A value of 0 for this object disables creation of
+ traceRouteProbeHistoryTable entries."
+ DEFVAL { 50 }
+ ::= { traceRouteCtlEntry 23 }
+
+ traceRouteCtlTrapGeneration OBJECT-TYPE
+ SYNTAX BITS {
+ pathChange(0),
+ testFailure(1),
+ testCompletion(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The value of this object determines when and whether to
+ generate a notification for this entry:
+
+ pathChange(0) - Generate a traceRoutePathChange
+ notification when the current path varies from a
+ previously determined path.
+ testFailure(1) - Generate a traceRouteTestFailed
+ notification when the full path to a target
+ can't be determined.
+ testCompletion(2) - Generate a traceRouteTestCompleted
+ notification when the path to a target has been
+ determined.
+
+ The value of this object defaults to an empty set,
+ indicating that none of the above options has been
+ selected."
+ DEFVAL { { } }
+ ::= { traceRouteCtlEntry 24 }
+
+ traceRouteCtlCreateHopsEntries OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The current path for a traceroute test is kept in the
+ traceRouteHopsTable on a per-hop basis when the value of
+ this object is true(1)."
+ DEFVAL { false }
+ ::= { traceRouteCtlEntry 25 }
+
+ traceRouteCtlType OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The value of this object is used either to report or to
+ select the implementation method to be used for
+ performing a traceroute operation. The value of this
+ object may be selected from
+ traceRouteImplementationTypeDomains.
+
+ Additional implementation types should be allocated as
+ required by implementers of the DISMAN-TRACEROUTE-MIB
+ under their enterprise specific registration point,
+ not beneath traceRouteImplementationTypeDomains."
+ DEFVAL { traceRouteUsingUdpProbes }
+ ::= { traceRouteCtlEntry 26 }
+
+ traceRouteCtlRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object allows entries to be created and deleted
+ in the traceRouteCtlTable. Deletion of an entry in
+ this table results in a deletion of all corresponding (same
+ traceRouteCtlOwnerIndex and traceRouteCtlTestName
+ index values) traceRouteResultsTable,
+ traceRouteProbeHistoryTable, and traceRouteHopsTable
+ entries.
+
+ A value MUST be specified for traceRouteCtlTargetAddress
+ prior to acceptance of a transition to active(1) state.
+
+ When a value for pingCtlTargetAddress is set,
+ the value of object pingCtlRowStatus changes
+ from notReady(3) to notInService(2).
+
+ Activation of a remote traceroute operation is
+ controlled via traceRouteCtlAdminStatus, and not
+ by transitioning of this object's value to active(1).
+
+ Transitions in and out of active(1) state are not
+ allowed while an entry's traceRouteResultsOperStatus
+ is active(1), with the exception that deletion of
+ an entry in this table by setting its RowStatus
+ object to destroy(6) will stop an active
+ traceroute operation.
+
+ The operational state of an traceroute operation
+ can be determined by examination of the corresponding
+ traceRouteResultsOperStatus object."
+ REFERENCE
+ "See definition of RowStatus in RFC 2579, 'Textual
+ Conventions for SMIv2.'"
+ ::= { traceRouteCtlEntry 27 }
+
+ -- Traceroute Results Table
+
+ traceRouteResultsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF TraceRouteResultsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Defines the Remote Operations Traceroute Results Table for
+ keeping track of the status of a traceRouteCtlEntry.
+
+ An entry is added to the traceRouteResultsTable when an
+ traceRouteCtlEntry is started by successful transition
+ of its traceRouteCtlAdminStatus object to enabled(1).
+
+ If the object traceRouteCtlAdminStatus already has the value
+ enabled(1), and if the corresponding
+ traceRouteResultsOperStatus object has the value
+ completed(3), then successfully writing enabled(1) to the
+ object traceRouteCtlAdminStatus re-initializes the already
+ existing entry in the traceRouteResultsTable. The values of
+ objects in the re-initialized entry are the same as
+ the values of objects in a new entry would be.
+
+ An entry is removed from the traceRouteResultsTable when
+
+ its corresponding traceRouteCtlEntry is deleted."
+ ::= { traceRouteObjects 3 }
+
+ traceRouteResultsEntry OBJECT-TYPE
+ SYNTAX TraceRouteResultsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Defines an entry in the traceRouteResultsTable. The
+ traceRouteResultsTable has the same indexing as the
+ traceRouteCtlTable so that a traceRouteResultsEntry
+ corresponds to the traceRouteCtlEntry that caused it to
+ be created."
+ INDEX {
+ traceRouteCtlOwnerIndex,
+ traceRouteCtlTestName
+ }
+ ::= { traceRouteResultsTable 1 }
+
+ TraceRouteResultsEntry ::=
+ SEQUENCE {
+ traceRouteResultsOperStatus INTEGER,
+ traceRouteResultsCurHopCount Gauge32,
+ traceRouteResultsCurProbeCount Gauge32,
+ traceRouteResultsIpTgtAddrType InetAddressType,
+ traceRouteResultsIpTgtAddr InetAddress,
+ traceRouteResultsTestAttempts Gauge32,
+ traceRouteResultsTestSuccesses Gauge32,
+ traceRouteResultsLastGoodPath DateAndTime
+ }
+
+ traceRouteResultsOperStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1), -- test is in progress
+ disabled(2), -- test has stopped
+ completed(3) -- test is completed
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Reflects the operational state of an traceRouteCtlEntry:
+
+ enabled(1) - Test is active.
+ disabled(2) - Test has stopped.
+ completed(3) - Test is completed."
+ ::= { traceRouteResultsEntry 1 }
+
+ traceRouteResultsCurHopCount OBJECT-TYPE
+ SYNTAX Gauge32
+ UNITS "hops"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Reflects the current TTL value (from 1 to
+ 255) for a remote traceroute operation.
+ Maximum TTL value is determined by
+ traceRouteCtlMaxTtl."
+ ::= { traceRouteResultsEntry 2 }
+
+ traceRouteResultsCurProbeCount OBJECT-TYPE
+ SYNTAX Gauge32
+ UNITS "probes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Reflects the current probe count (1..10) for
+ a remote traceroute operation. The maximum
+ probe count is determined by
+ traceRouteCtlProbesPerHop."
+ ::= { traceRouteResultsEntry 3 }
+
+ traceRouteResultsIpTgtAddrType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the type of address stored
+ in the corresponding traceRouteResultsIpTgtAddr
+ object."
+ ::= { traceRouteResultsEntry 4 }
+
+ traceRouteResultsIpTgtAddr OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object reports the IP address associated
+ with a traceRouteCtlTargetAddress value when the
+ destination address is specified as a DNS name.
+ The value of this object should be a zero-length
+ octet string when a DNS name is not specified or
+ when a specified DNS name fails to resolve."
+ ::= { traceRouteResultsEntry 5 }
+
+ traceRouteResultsTestAttempts OBJECT-TYPE
+ SYNTAX Gauge32
+ UNITS "tests"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current number of attempts to determine a path
+ to a target. The value of this object MUST be started
+ at 0."
+ ::= { traceRouteResultsEntry 6 }
+
+ traceRouteResultsTestSuccesses OBJECT-TYPE
+ SYNTAX Gauge32
+ UNITS "tests"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current number of attempts to determine a path
+ to a target that have succeeded. The value of this
+ object MUST be reported as 0 when no attempts have
+ succeeded."
+ ::= { traceRouteResultsEntry 7 }
+
+ traceRouteResultsLastGoodPath OBJECT-TYPE
+ SYNTAX DateAndTime
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The date and time when the last complete path
+ was determined. A path is complete if responses
+ were received or timeout occurred for each hop on
+ the path; i.e., for each TTL value from the value
+ of the corresponding traceRouteCtlInitialTtl object
+ up to the end of the path or (if no reply from the
+ target IP address was received) up to the value of
+ the corresponding traceRouteCtlMaxTtl object."
+ ::= { traceRouteResultsEntry 8 }
+
+ -- Trace Route Probe History Table
+
+ traceRouteProbeHistoryTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF TraceRouteProbeHistoryEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Defines the Remote Operations Traceroute Results Table
+ for storing the results of a traceroute operation.
+
+ An implementation of this MIB will remove the oldest
+
+ entry in the traceRouteProbeHistoryTable of the
+ corresponding entry in the traceRouteCtlTable to allow
+ the addition of a new entry once the number of rows in
+ the traceRouteProbeHistoryTable reaches the value specified
+ by traceRouteCtlMaxRows for the corresponding entry in the
+ traceRouteCtlTable."
+ ::= { traceRouteObjects 4 }
+
+ traceRouteProbeHistoryEntry OBJECT-TYPE
+ SYNTAX TraceRouteProbeHistoryEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Defines a table for storing the results of a traceroute
+ operation. Entries in this table are limited by
+ the value of the corresponding traceRouteCtlMaxRows
+ object.
+
+ The first two index elements identify the
+ traceRouteCtlEntry that a traceRouteProbeHistoryEntry
+ belongs to. The third index element selects a single
+ traceroute operation result. The fourth and fifth indexes
+ select the hop and the probe for a particular
+ traceroute operation."
+ INDEX {
+ traceRouteCtlOwnerIndex,
+ traceRouteCtlTestName,
+ traceRouteProbeHistoryIndex,
+ traceRouteProbeHistoryHopIndex,
+ traceRouteProbeHistoryProbeIndex
+
+ }
+ ::= { traceRouteProbeHistoryTable 1 }
+
+ TraceRouteProbeHistoryEntry ::=
+ SEQUENCE {
+ traceRouteProbeHistoryIndex Unsigned32,
+ traceRouteProbeHistoryHopIndex Unsigned32,
+ traceRouteProbeHistoryProbeIndex Unsigned32,
+ traceRouteProbeHistoryHAddrType InetAddressType,
+ traceRouteProbeHistoryHAddr InetAddress,
+ traceRouteProbeHistoryResponse Unsigned32,
+ traceRouteProbeHistoryStatus OperationResponseStatus,
+ traceRouteProbeHistoryLastRC Integer32,
+ traceRouteProbeHistoryTime DateAndTime
+ }
+
+ traceRouteProbeHistoryIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (1..'ffffffff'h)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry in this table is created when the result of
+ a traceroute probe is determined. The initial 2 instance
+ identifier index values identify the traceRouteCtlEntry
+ that a probe result (traceRouteProbeHistoryEntry) belongs
+ to. An entry is removed from this table when
+ its corresponding traceRouteCtlEntry is deleted.
+
+ An implementation MUST start assigning
+ traceRouteProbeHistoryIndex values at 1 and wrap after
+ exceeding the maximum possible value, as defined by the
+ limit of this object ('ffffffff'h)."
+ ::= { traceRouteProbeHistoryEntry 1 }
+
+ traceRouteProbeHistoryHopIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (1..255)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Indicates which hop in a traceroute path the probe's
+ results are for. The value of this object is initially
+ determined by the value of traceRouteCtlInitialTtl."
+ ::= { traceRouteProbeHistoryEntry 2 }
+
+ traceRouteProbeHistoryProbeIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (1..10)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Indicates the index of a probe for a particular
+ hop in a traceroute path. The number of probes per
+ hop is determined by the value of the corresponding
+ traceRouteCtlProbesPerHop object."
+ ::= { traceRouteProbeHistoryEntry 3 }
+
+ traceRouteProbeHistoryHAddrType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This objects indicates the type of address stored
+ in the corresponding traceRouteProbeHistoryHAddr
+ object."
+ ::= { traceRouteProbeHistoryEntry 4 }
+
+ traceRouteProbeHistoryHAddr OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The address of a hop in a traceroute path. This object
+ is not allowed to be a DNS name. The value of the
+ corresponding object, traceRouteProbeHistoryHAddrType,
+ indicates this object's IP address type."
+ ::= { traceRouteProbeHistoryEntry 5 }
+
+ traceRouteProbeHistoryResponse OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "milliseconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The amount of time measured in milliseconds from when
+ a probe was sent to when its response was received or
+ when it timed out. The value of this object is reported
+ as 0 when it is not possible to transmit a probe."
+ ::= { traceRouteProbeHistoryEntry 6 }
+
+ traceRouteProbeHistoryStatus OBJECT-TYPE
+ SYNTAX OperationResponseStatus
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The result of a traceroute operation made by a remote
+ host for a particular probe."
+ ::= { traceRouteProbeHistoryEntry 7 }
+
+ traceRouteProbeHistoryLastRC OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last implementation-method-specific reply code received.
+
+ Traceroute is usually implemented by transmitting a series of
+ probe packets with increasing time-to-live values. A probe
+ packet is a UDP datagram encapsulated into an IP packet.
+ Each hop in a path to the target (destination) host rejects
+ the probe packets (probe's TTL too small, ICMP reply) until
+ either the maximum TTL is exceeded or the target host is
+ received."
+ ::= { traceRouteProbeHistoryEntry 8 }
+
+ traceRouteProbeHistoryTime OBJECT-TYPE
+ SYNTAX DateAndTime
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Timestamp for when this probe's results were determined."
+ ::= { traceRouteProbeHistoryEntry 9 }
+
+ -- Traceroute Hop Results Table
+
+ traceRouteHopsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF TraceRouteHopsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Defines the Remote Operations Traceroute Hop Table for
+ keeping track of the results of traceroute tests on a
+ per-hop basis."
+ ::= { traceRouteObjects 5 }
+
+ traceRouteHopsEntry OBJECT-TYPE
+ SYNTAX TraceRouteHopsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Defines an entry in the traceRouteHopsTable.
+ The first two index elements identify the
+ traceRouteCtlEntry that a traceRouteHopsEntry
+ belongs to. The third index element,
+ traceRouteHopsHopIndex, selects a
+ hop in a traceroute path."
+ INDEX {
+ traceRouteCtlOwnerIndex,
+ traceRouteCtlTestName,
+ traceRouteHopsHopIndex
+ }
+ ::= { traceRouteHopsTable 1 }
+
+ TraceRouteHopsEntry ::=
+ SEQUENCE {
+ traceRouteHopsHopIndex Unsigned32,
+ traceRouteHopsIpTgtAddressType InetAddressType,
+ traceRouteHopsIpTgtAddress InetAddress,
+ traceRouteHopsMinRtt Unsigned32,
+ traceRouteHopsMaxRtt Unsigned32,
+ traceRouteHopsAverageRtt Unsigned32,
+ traceRouteHopsRttSumOfSquares Unsigned32,
+ traceRouteHopsSentProbes Unsigned32,
+ traceRouteHopsProbeResponses Unsigned32,
+ traceRouteHopsLastGoodProbe DateAndTime
+ }
+
+ traceRouteHopsHopIndex OBJECT-TYPE
+ SYNTAX Unsigned32 (1..'ffffffff'h)
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Specifies the hop index for a traceroute hop. Values
+ for this object with respect to the same
+ traceRouteCtlOwnerIndex and traceRouteCtlTestName
+ MUST start at 1 and be given increasing values for
+ subsequent hops. The value of traceRouteHopsHopIndex is not
+ necessarily the number of the hop on the traced path.
+
+ The traceRouteHopsTable keeps the current traceroute
+ path per traceRouteCtlEntry if enabled by
+ setting the corresponding traceRouteCtlCreateHopsEntries
+ to true(1).
+
+ All hops (traceRouteHopsTable entries) in a traceroute
+ path MUST be updated at the same time when a traceroute
+ operation is completed. Care needs to be applied when a path
+ either changes or can't be determined. The initial portion
+ of the path, up to the first hop change, MUST retain the
+ same traceRouteHopsHopIndex values. The remaining portion
+ of the path SHOULD be assigned new traceRouteHopsHopIndex
+ values."
+ ::= { traceRouteHopsEntry 1 }
+
+ traceRouteHopsIpTgtAddressType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the type of address stored
+ in the corresponding traceRouteHopsIpTgtAddress
+ object."
+ ::= { traceRouteHopsEntry 2 }
+
+ traceRouteHopsIpTgtAddress OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object reports the IP address associated with
+
+ the hop. A value for this object should be reported
+ as a numeric IP address, not as a DNS name.
+
+ The address type (InetAddressType) that relates to
+ this object is specified by the corresponding value
+ of pingCtlSourceAddressType."
+ ::= { traceRouteHopsEntry 3 }
+
+ traceRouteHopsMinRtt OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The minimum traceroute round-trip-time (RTT) received for
+ this hop. A value of 0 for this object implies that no
+ RTT has been received."
+ ::= { traceRouteHopsEntry 4 }
+
+ traceRouteHopsMaxRtt OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum traceroute round-trip-time (RTT) received for
+ this hop. A value of 0 for this object implies that no
+ RTT has been received."
+ ::= { traceRouteHopsEntry 5 }
+
+ traceRouteHopsAverageRtt OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current average traceroute round-trip-time (RTT) for
+ this hop."
+ ::= { traceRouteHopsEntry 6 }
+
+ traceRouteHopsRttSumOfSquares OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object contains the sum of the squares of all
+ round-trip-times received for this hop. Its purpose is
+ to enable standard deviation calculation."
+ ::= { traceRouteHopsEntry 7 }
+
+ traceRouteHopsSentProbes OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of this object reflects the number of probes sent
+ for this hop during this traceroute test. The value of this
+ object should start at 0."
+ ::= { traceRouteHopsEntry 8 }
+
+ traceRouteHopsProbeResponses OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Number of responses received for this hop during this
+ traceroute test. This value of this object should start
+ at 0."
+ ::= { traceRouteHopsEntry 9 }
+
+ traceRouteHopsLastGoodProbe OBJECT-TYPE
+ SYNTAX DateAndTime
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Date and time at which the last response was received for a
+ probe for this hop during this traceroute test."
+ ::= { traceRouteHopsEntry 10 }
+
+ -- Notification Definition section
+
+ traceRoutePathChange NOTIFICATION-TYPE
+ OBJECTS {
+ traceRouteCtlTargetAddressType,
+ traceRouteCtlTargetAddress,
+ traceRouteResultsIpTgtAddrType,
+ traceRouteResultsIpTgtAddr
+ }
+ STATUS current
+ DESCRIPTION
+ "The path to a target has changed."
+ ::= { traceRouteNotifications 1 }
+
+ traceRouteTestFailed NOTIFICATION-TYPE
+ OBJECTS {
+ traceRouteCtlTargetAddressType,
+ traceRouteCtlTargetAddress,
+ traceRouteResultsIpTgtAddrType,
+ traceRouteResultsIpTgtAddr
+
+ }
+ STATUS current
+ DESCRIPTION
+ "Could not determine the path to a target."
+ ::= { traceRouteNotifications 2 }
+
+ traceRouteTestCompleted NOTIFICATION-TYPE
+ OBJECTS {
+ traceRouteCtlTargetAddressType,
+ traceRouteCtlTargetAddress,
+ traceRouteResultsIpTgtAddrType,
+ traceRouteResultsIpTgtAddr
+ }
+ STATUS current
+ DESCRIPTION
+ "The path to a target has just been determined."
+ ::= { traceRouteNotifications 3 }
+
+ -- Conformance information
+ -- Compliance statements
+
+ traceRouteCompliances OBJECT IDENTIFIER
+ ::= { traceRouteConformance 1 }
+ traceRouteGroups OBJECT IDENTIFIER
+ ::= { traceRouteConformance 2 }
+
+ -- Compliance statements
+
+ traceRouteFullCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for SNMP entities that
+ fully implement the DISMAN-TRACEROUTE-MIB."
+ MODULE -- this module
+ MANDATORY-GROUPS {
+ traceRouteMinimumGroup,
+ traceRouteCtlRowStatusGroup,
+ traceRouteHistoryGroup
+ }
+
+ GROUP traceRouteHopsTableGroup
+ DESCRIPTION
+ "This group lists the objects that make up a
+ traceRouteHopsEntry. Support of the traceRouteHopsTable
+ is optional."
+
+ GROUP traceRouteNotificationsGroup
+ DESCRIPTION
+ "This group defines a collection of optional
+ notifications."
+
+ OBJECT traceRouteMaxConcurrentRequests
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "The agent is not required to support SET
+ operations to this object."
+
+ OBJECT traceRouteCtlByPassRouteTable
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access to this object is not required by
+ implementations that are not capable of its
+ implementation. The function represented by this
+ object is implementable if the setsockopt
+ SOL_SOCKET SO_DONTROUTE option is supported."
+
+ OBJECT traceRouteCtlDSField
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required. If write access is
+ not supported, return a 0 as the value of this object.
+ A value of 0 implies that the function represented by
+ this option is not supported."
+
+ OBJECT traceRouteCtlSourceAddressType
+ SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access to this object is not required by
+ implementations that are not capable of binding the
+ send socket with a source address. An implementation
+ is only required to support IPv4 and IPv6 addresses."
+
+ OBJECT traceRouteCtlSourceAddress
+ SYNTAX InetAddress (SIZE(0|4|16))
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access to this object is not required by
+ implementations that are not capable of binding the
+ send socket with a source address. An implementation
+ is only required to support IPv4 and IPv6 addresses."
+
+ OBJECT traceRouteCtlIfIndex
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required. If write access is
+
+ not supported, return a 0 as the value of this object.
+ A value of 0 implies that the function represented by
+ this option is not supported."
+
+ OBJECT traceRouteCtlMiscOptions
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Support of this object is optional. If not
+ supporting, do not allow write access and return a
+ zero-length octet string as the value of the object."
+
+ OBJECT traceRouteCtlStorageType
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required. It is also allowed
+ that implementations support only the volatile(2)
+ StorageType enumeration."
+
+ OBJECT traceRouteCtlType
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required. In addition, the only
+ value that is RECOMMENDED to be supported by an
+ implementation is traceRouteUsingUdpProbes."
+
+ OBJECT traceRouteResultsIpTgtAddrType
+ SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+ DESCRIPTION
+ "An implementation should only support IPv4 and
+ globally unique IPv6 address values for this object."
+
+ OBJECT traceRouteResultsIpTgtAddr
+ SYNTAX InetAddress (SIZE(0|4|16))
+ DESCRIPTION
+ "An implementation should only support IPv4 and
+ globally unique IPv6 address values for this object."
+
+ OBJECT traceRouteResultsLastGoodPath
+ DESCRIPTION
+ "If the traceRouteHopsTableGroup is implemented, then
+ this object is mandatory for implementations that have
+ access to a system clock and that are capable of setting
+ the values for DateAndTime objects. It is RECOMMENDED
+ that when this object is not supported its values
+ be reported as '0000000000000000'H."
+
+ OBJECT traceRouteProbeHistoryHAddrType
+ SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+ DESCRIPTION
+ "An implementation should only support IPv4 and
+ globally unique IPv6 address values for this object."
+
+ OBJECT traceRouteProbeHistoryHAddr
+ SYNTAX InetAddress (SIZE(0|4|16))
+ DESCRIPTION
+ "An implementation should only support IPv4 and
+ globally unique IPv6 address values for this object."
+
+ OBJECT traceRouteProbeHistoryTime
+ DESCRIPTION
+ "This object is mandatory for implementations that have
+ access to a system clock and that are capable of setting
+ the values for DateAndTime objects. It is RECOMMENDED
+ that when this object is not supported its values
+ be reported as '0000000000000000'H."
+
+ OBJECT traceRouteHopsIpTgtAddressType
+ SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+ DESCRIPTION
+ "An implementation should only support IPv4 and
+ globally unique IPv6 address values for this object."
+
+ OBJECT traceRouteHopsIpTgtAddress
+ SYNTAX InetAddress (SIZE(0|4|16))
+ DESCRIPTION
+ "An implementation should only support IPv4 and
+ globally unique IPv6 address values for this object."
+
+ OBJECT traceRouteHopsLastGoodProbe
+ DESCRIPTION
+ "This object is mandatory for implementations that have
+ access to a system clock and that are capable of setting
+ the values for DateAndTime objects. It is RECOMMENDED
+ that when this object is not supported its values
+ be reported as '0000000000000000'H."
+ ::= { traceRouteCompliances 2 }
+
+ traceRouteMinimumCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The minimum compliance statement for SNMP entities
+ which implement the minimal subset of the
+ DISMAN-TRACEROUTE-MIB. Implementors might choose this
+ subset for small devices with limited resources."
+ MODULE -- this module
+
+ MANDATORY-GROUPS { traceRouteMinimumGroup }
+
+ GROUP traceRouteCtlRowStatusGroup
+ DESCRIPTION
+ "A compliant implementation does not have to implement
+ the traceRouteCtlRowStatusGroup."
+
+ GROUP traceRouteHistoryGroup
+ DESCRIPTION
+ "A compliant implementation does not have to implement
+ the traceRouteHistoryGroup."
+
+ GROUP traceRouteHopsTableGroup
+ DESCRIPTION
+ "This group lists the objects that make up a
+ traceRouteHopsEntry. Support of the traceRouteHopsTable
+ is optional."
+
+ GROUP traceRouteNotificationsGroup
+ DESCRIPTION
+ "This group defines a collection of optional
+ notifications."
+
+ OBJECT traceRouteMaxConcurrentRequests
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "The agent is not required to support SET
+ operations to this object."
+
+ OBJECT traceRouteCtlByPassRouteTable
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required. If write access is
+ not supported, return a false(2) as the value of this
+ object. A value of false(2) means that the function
+ represented by this option is not supported."
+
+ OBJECT traceRouteCtlDSField
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required. If write access is
+ not supported, return a 0 as the value of this object.
+ A value of 0 implies that the function represented by
+ this option is not supported."
+
+ OBJECT traceRouteCtlSourceAddressType
+ SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access to this object is not required by
+ implementations that are not capable of binding the
+ send socket with a source address. An implementation
+ is only required to support IPv4 and IPv6 addresses."
+
+ OBJECT traceRouteCtlSourceAddress
+ SYNTAX InetAddress (SIZE(0|4|16))
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access to this object is not required by
+ implementations that are not capable of binding the
+ send socket with a source address. An implementation
+ is only required to support IPv4 and IPv6 addresses."
+
+ OBJECT traceRouteCtlIfIndex
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required. If write access is
+ not supported, return a 0 as the value of this object.
+ A value of 0 implies that the function represented by
+ this option is not supported."
+
+ OBJECT traceRouteCtlMiscOptions
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Support of this object is optional. If not
+ supporting, do not allow write access, and return a
+ zero-length octet string as the value of the object."
+
+ OBJECT traceRouteCtlDontFragment
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required. If write access is
+ not supported, return a false(2) as the value of this
+ object. A value of false(2) means that the function
+ represented by this option is not supported."
+
+ OBJECT traceRouteCtlInitialTtl
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required. If write access is
+ not supported, return a 1 as the value of this object."
+
+ OBJECT traceRouteCtlFrequency
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required. If write access is
+ not supported, return a 0 as the value of this object.
+ A value of 0 implies that the function represented by
+ this option is not supported."
+
+ OBJECT traceRouteCtlStorageType
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required. It is also allowed
+ that implementations support only the volatile(2)
+ StorageType enumeration."
+
+ OBJECT traceRouteCtlDescr
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "The agent is not required to support set
+ operations to this object."
+
+ OBJECT traceRouteCtlMaxRows
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required. If the
+ traceRouteHistoryGroup is not implemented, then write
+ access to this object MUST be disabled, and the object
+ MUST return a value of 0 when retrieved."
+
+ OBJECT traceRouteCtlTrapGeneration
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required. If the
+ traceRouteNotificationsGroup is not implemented, then
+ write access to this object MUST be disabled, and the
+ object MUST return a value with no bit set when
+ retrieved. No bit set indicates that no notification
+ is generated."
+
+ OBJECT traceRouteCtlCreateHopsEntries
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required. If the
+ traceRouteHopsTableGroup is not implemented, then
+ write access to this object MUST be disabled, and the
+ object MUST return a value of false(2) when retrieved."
+
+ OBJECT traceRouteCtlType
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required. In addition, the only
+
+ value that is RECOMMENDED to be supported by an
+ implementation is traceRouteUsingUdpProbes."
+
+ OBJECT traceRouteResultsIpTgtAddrType
+ SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+ DESCRIPTION
+ "An implementation should only support IPv4 and
+ globally unique IPv6 address values for this object."
+
+ OBJECT traceRouteResultsIpTgtAddr
+ SYNTAX InetAddress (SIZE(0|4|16))
+ DESCRIPTION
+ "An implementation should only support IPv4 and
+ globally unique IPv6 address values for this object."
+
+ OBJECT traceRouteResultsLastGoodPath
+ DESCRIPTION
+ "This object is mandatory for implementations that have
+ access to a system clock and that are capable of setting
+ the values for DateAndTime objects. It is RECOMMENDED
+ that when this object is not supported its values
+ be reported as '0000000000000000'H."
+
+ OBJECT traceRouteProbeHistoryHAddrType
+ SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+ DESCRIPTION
+ "An implementation should only support IPv4 and
+ globally unique IPv6 address values for this object."
+
+ OBJECT traceRouteProbeHistoryHAddr
+ SYNTAX InetAddress (SIZE(0|4|16))
+ DESCRIPTION
+ "An implementation should only support IPv4 and
+ globally unique IPv6 address values for this object."
+
+ OBJECT traceRouteProbeHistoryTime
+ DESCRIPTION
+ "If the traceRouteHistoryGroup is implemented, then
+ this object is mandatory for implementations that have
+ access to a system clock and that are capable of setting
+ the values for DateAndTime objects. It is RECOMMENDED
+ that when this object is not supported its values
+ be reported as '0000000000000000'H."
+
+ OBJECT traceRouteHopsIpTgtAddressType
+ SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+ DESCRIPTION
+ "An implementation should only support IPv4 and
+
+ globally unique IPv6 address values for this object."
+
+ OBJECT traceRouteHopsIpTgtAddress
+ SYNTAX InetAddress (SIZE(0|4|16))
+ DESCRIPTION
+ "An implementation should only support IPv4 and
+ globally unique IPv6 address values for this object."
+
+ OBJECT traceRouteHopsLastGoodProbe
+ DESCRIPTION
+ "If the traceRouteHopsTableGroup is implemented, then
+ this object is mandatory for implementations that have
+ access to a system clock and that are capable of setting
+ the values for DateAndTime objects. It is RECOMMENDED
+ that when this object is not supported its values
+ be reported as '0000000000000000'H."
+ ::= { traceRouteCompliances 3 }
+
+ traceRouteCompliance MODULE-COMPLIANCE
+ STATUS deprecated
+ DESCRIPTION
+ "The compliance statement for the DISMAN-TRACEROUTE-MIB.
+ This compliance statement has been deprecated because
+ the traceRouteGroup and the traceRouteTimeStampGroup
+ have been split and deprecated. The
+ traceRouteFullCompliance is semantically identical to the
+ deprecated traceRouteCompliance statement."
+ MODULE -- this module
+ MANDATORY-GROUPS {
+ traceRouteGroup
+ }
+ GROUP traceRouteTimeStampGroup
+ DESCRIPTION
+ "This group is mandatory for implementations that have
+ access to a system clock and that are capable of setting
+ the values for DateAndTime objects."
+
+ GROUP traceRouteNotificationsGroup
+ DESCRIPTION
+ "This group defines a collection of optional
+ notifications."
+
+ GROUP traceRouteHopsTableGroup
+ DESCRIPTION
+ "This group lists the objects that make up a
+ traceRouteHopsEntry. Support of the traceRouteHopsTable
+ is optional."
+
+ OBJECT traceRouteMaxConcurrentRequests
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "The agent is not required to support SET
+ operations to this object."
+
+ OBJECT traceRouteCtlByPassRouteTable
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "This object is not required by implementations that
+ are not capable of its implementation. The function
+ represented by this object is implementable if the
+ setsockopt SOL_SOCKET SO_DONTROUTE option is
+ supported."
+
+ OBJECT traceRouteCtlSourceAddressType
+ SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "This object is not required by implementations that
+ are not capable of binding the send socket with a
+ source address. An implementation is only required to
+ support IPv4 and IPv6 addresses."
+
+ OBJECT traceRouteCtlSourceAddress
+ SYNTAX InetAddress (SIZE(0|4|16))
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "This object is not required by implementations that
+ are not capable of binding the send socket with a
+ source address. An implementation is only required to
+ support IPv4 and globally unique IPv6 addresses."
+
+ OBJECT traceRouteCtlIfIndex
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required. When write access is
+ not supported, return a 0 as the value of this object.
+ A value of 0 implies that the function represented by
+ this option is not supported."
+
+ OBJECT traceRouteCtlMiscOptions
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Support of this object is optional. When not
+ supporting, do not allow write access, and return a
+ zero-length octet string as the value of the object."
+
+ OBJECT traceRouteCtlStorageType
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required. It is also allowed
+ that implementations support only the volatile
+ StorageType enumeration."
+
+ OBJECT traceRouteCtlDSField
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required. When write access is
+ not supported, return a 0 as the value of this object.
+ A value of 0 implies that the function represented by
+ this option is not supported."
+
+ OBJECT traceRouteCtlType
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required. In addition, the only
+ value that is RECOMMENDED to be supported by an
+ implementation is traceRouteUsingUdpProbes."
+
+ OBJECT traceRouteResultsIpTgtAddrType
+ SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+ DESCRIPTION
+ "An implementation should only support IPv4 and
+ globally unique IPv6 address values for this object."
+
+ OBJECT traceRouteResultsIpTgtAddr
+ SYNTAX InetAddress (SIZE(0|4|16))
+ DESCRIPTION
+ "An implementation should only support IPv4 and
+ globally unique IPv6 address values for this object."
+
+ OBJECT traceRouteProbeHistoryHAddrType
+ SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+ DESCRIPTION
+ "An implementation should only support IPv4 and
+ globally unique IPv6 address values for this object."
+
+ OBJECT traceRouteProbeHistoryHAddr
+ SYNTAX InetAddress (SIZE(0|4|16))
+ DESCRIPTION
+ "An implementation should only support IPv4 and
+ globally unique IPv6 address values for this object."
+
+ OBJECT traceRouteHopsIpTgtAddressType
+ SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+ DESCRIPTION
+ "An implementation should only support IPv4 and
+ globally unique IPv6 address values for this object."
+
+ OBJECT traceRouteHopsIpTgtAddress
+ SYNTAX InetAddress (SIZE(0|4|16))
+ DESCRIPTION
+ "An implementation should only support IPv4 and
+ globally unique IPv6 address values for this object."
+ ::= { traceRouteCompliances 1 }
+
+ -- MIB groupings
+
+ traceRouteMinimumGroup OBJECT-GROUP
+ OBJECTS {
+ traceRouteMaxConcurrentRequests,
+ traceRouteCtlTargetAddressType,
+ traceRouteCtlTargetAddress,
+ traceRouteCtlByPassRouteTable,
+ traceRouteCtlDataSize,
+ traceRouteCtlTimeOut,
+ traceRouteCtlProbesPerHop,
+ traceRouteCtlPort,
+ traceRouteCtlMaxTtl,
+ traceRouteCtlDSField,
+ traceRouteCtlSourceAddressType,
+ traceRouteCtlSourceAddress,
+ traceRouteCtlIfIndex,
+ traceRouteCtlMiscOptions,
+ traceRouteCtlMaxFailures,
+ traceRouteCtlDontFragment,
+ traceRouteCtlInitialTtl,
+ traceRouteCtlFrequency,
+ traceRouteCtlStorageType,
+ traceRouteCtlAdminStatus,
+ traceRouteCtlMaxRows,
+ traceRouteCtlTrapGeneration,
+ traceRouteCtlDescr,
+ traceRouteCtlCreateHopsEntries,
+ traceRouteCtlType,
+ traceRouteResultsOperStatus,
+ traceRouteResultsCurHopCount,
+ traceRouteResultsCurProbeCount,
+ traceRouteResultsIpTgtAddrType,
+ traceRouteResultsIpTgtAddr,
+ traceRouteResultsTestAttempts,
+ traceRouteResultsTestSuccesses,
+ traceRouteResultsLastGoodPath
+
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of objects that constitute the remote traceroute
+ operation."
+ ::= { traceRouteGroups 5 }
+
+ traceRouteCtlRowStatusGroup OBJECT-GROUP
+ OBJECTS {
+ traceRouteCtlRowStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "The RowStatus object of the traceRouteCtlTable."
+ ::= { traceRouteGroups 6 }
+
+ traceRouteHistoryGroup OBJECT-GROUP
+ OBJECTS {
+ traceRouteProbeHistoryHAddrType,
+ traceRouteProbeHistoryHAddr,
+ traceRouteProbeHistoryResponse,
+ traceRouteProbeHistoryStatus,
+ traceRouteProbeHistoryLastRC,
+ traceRouteProbeHistoryTime
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of objects that constitute the history
+ capability."
+ ::= { traceRouteGroups 7 }
+
+ traceRouteNotificationsGroup NOTIFICATION-GROUP
+ NOTIFICATIONS {
+ traceRoutePathChange,
+ traceRouteTestFailed,
+ traceRouteTestCompleted
+ }
+ STATUS current
+ DESCRIPTION
+ "The notifications that are required to be supported by
+ implementations of this MIB."
+ ::= { traceRouteGroups 3 }
+
+ traceRouteHopsTableGroup OBJECT-GROUP
+ OBJECTS {
+ traceRouteHopsIpTgtAddressType,
+ traceRouteHopsIpTgtAddress,
+ traceRouteHopsMinRtt,
+ traceRouteHopsMaxRtt,
+ traceRouteHopsAverageRtt,
+ traceRouteHopsRttSumOfSquares,
+ traceRouteHopsSentProbes,
+ traceRouteHopsProbeResponses,
+ traceRouteHopsLastGoodProbe
+ }
+ STATUS current
+ DESCRIPTION
+ "The group of objects that constitute the
+ traceRouteHopsTable."
+ ::= { traceRouteGroups 4 }
+
+ traceRouteGroup OBJECT-GROUP
+ OBJECTS {
+ traceRouteMaxConcurrentRequests,
+ traceRouteCtlTargetAddressType,
+ traceRouteCtlTargetAddress,
+ traceRouteCtlByPassRouteTable,
+ traceRouteCtlDataSize,
+ traceRouteCtlTimeOut,
+ traceRouteCtlProbesPerHop,
+ traceRouteCtlPort,
+ traceRouteCtlMaxTtl,
+ traceRouteCtlDSField,
+ traceRouteCtlSourceAddressType,
+ traceRouteCtlSourceAddress,
+ traceRouteCtlIfIndex,
+ traceRouteCtlMiscOptions,
+ traceRouteCtlMaxFailures,
+ traceRouteCtlDontFragment,
+ traceRouteCtlInitialTtl,
+ traceRouteCtlFrequency,
+ traceRouteCtlStorageType,
+ traceRouteCtlAdminStatus,
+ traceRouteCtlMaxRows,
+ traceRouteCtlTrapGeneration,
+ traceRouteCtlDescr,
+ traceRouteCtlCreateHopsEntries,
+ traceRouteCtlType,
+ traceRouteCtlRowStatus,
+ traceRouteResultsOperStatus,
+ traceRouteResultsCurHopCount,
+ traceRouteResultsCurProbeCount,
+ traceRouteResultsIpTgtAddrType,
+ traceRouteResultsIpTgtAddr,
+ traceRouteResultsTestAttempts,
+ traceRouteResultsTestSuccesses,
+ traceRouteProbeHistoryHAddrType,
+ traceRouteProbeHistoryHAddr,
+ traceRouteProbeHistoryResponse,
+ traceRouteProbeHistoryStatus,
+ traceRouteProbeHistoryLastRC
+ }
+ STATUS deprecated
+ DESCRIPTION
+ "The group of objects that constitute the remote traceroute
+ operation."
+ ::= { traceRouteGroups 1 }
+
+ traceRouteTimeStampGroup OBJECT-GROUP
+ OBJECTS {
+ traceRouteResultsLastGoodPath,
+ traceRouteProbeHistoryTime
+ }
+ STATUS deprecated
+ DESCRIPTION
+ "The group of DateAndTime objects."
+ ::= { traceRouteGroups 2 }
+
+END