snmp: T3606: Install MIBs into well known location

FRR also expects the MIBs in /usr/share/snmp/mibs

1 files changed, 1814 insertions, 0 deletions

diff --git a/mibs/IF-MIB.txt b/mibs/IF-MIB.txt
new file mode 100644
index 000000000..7704f0c25
--- /dev/null
+++ b/mibs/IF-MIB.txt
@@ -0,0 +1,1814 @@
+IF-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32, Counter64,
+    Integer32, TimeTicks, mib-2,
+    NOTIFICATION-TYPE                        FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION, DisplayString,
+    PhysAddress, TruthValue, RowStatus,
+    TimeStamp, AutonomousType, TestAndIncr   FROM SNMPv2-TC
+    MODULE-COMPLIANCE, OBJECT-GROUP,
+    NOTIFICATION-GROUP                       FROM SNMPv2-CONF
+    snmpTraps                                FROM SNMPv2-MIB
+    IANAifType                               FROM IANAifType-MIB;
+
+ifMIB MODULE-IDENTITY
+    LAST-UPDATED "200006140000Z"
+    ORGANIZATION "IETF Interfaces MIB Working Group"
+    CONTACT-INFO
+            "   Keith McCloghrie
+                Cisco Systems, Inc.
+                170 West Tasman Drive
+                San Jose, CA  95134-1706
+                US
+
+                408-526-5260
+                kzm@cisco.com"
+    DESCRIPTION
+            "The MIB module to describe generic objects for network
+            interface sub-layers.  This MIB is an updated version of
+            MIB-II's ifTable, and incorporates the extensions defined in
+            RFC 1229."
+
+    REVISION      "200006140000Z"
+    DESCRIPTION
+            "Clarifications agreed upon by the Interfaces MIB WG, and
+            published as RFC 2863."
+    REVISION      "199602282155Z"
+    DESCRIPTION
+            "Revisions made by the Interfaces MIB WG, and published in
+            RFC 2233."
+    REVISION      "199311082155Z"
+    DESCRIPTION
+            "Initial revision, published as part of RFC 1573."
+    ::= { mib-2 31 }
+
+ifMIBObjects OBJECT IDENTIFIER ::= { ifMIB 1 }
+
+interfaces   OBJECT IDENTIFIER ::= { mib-2 2 }
+
+--
+-- Textual Conventions
+--
+
+-- OwnerString has the same semantics as used in RFC 1271
+
+OwnerString ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS       deprecated
+    DESCRIPTION
+            "This data type is used to model an administratively
+            assigned name of the owner of a resource.  This information
+            is taken from the NVT ASCII character set.  It is suggested
+            that this name contain one or more of the following: ASCII
+            form of the manager station's transport address, management
+            station name (e.g., domain name), network management
+            personnel's name, location, or phone number.  In some cases
+            the agent itself will be the owner of an entry.  In these
+            cases, this string shall be set to a string starting with
+            'agent'."
+    SYNTAX       OCTET STRING (SIZE(0..255))
+
+-- InterfaceIndex contains the semantics of ifIndex and should be used
+-- for any objects defined in other MIB modules that need these semantics.
+
+InterfaceIndex ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS       current
+    DESCRIPTION
+            "A unique value, greater than zero, for each interface or
+            interface sub-layer in the managed system.  It is
+            recommended that values are assigned contiguously starting
+            from 1.  The value for each interface sub-layer must remain
+            constant at least from one re-initialization of the entity's
+            network management system to the next re-initialization."
+    SYNTAX       Integer32 (1..2147483647)
+
+InterfaceIndexOrZero ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS       current
+    DESCRIPTION
+            "This textual convention is an extension of the
+            InterfaceIndex convention.  The latter defines a greater
+            than zero value used to identify an interface or interface
+            sub-layer in the managed system.  This extension permits the
+            additional value of zero.  the value zero is object-specific
+            and must therefore be defined as part of the description of
+            any object which uses this syntax.  Examples of the usage of
+            zero might include situations where interface was unknown,
+            or when none or all interfaces need to be referenced."
+    SYNTAX       Integer32 (0..2147483647)
+
+ifNumber  OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of network interfaces (regardless of their
+            current state) present on this system."
+    ::= { interfaces 1 }
+
+ifTableLastChange  OBJECT-TYPE
+    SYNTAX      TimeTicks
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The value of sysUpTime at the time of the last creation or
+            deletion of an entry in the ifTable.  If the number of
+            entries has been unchanged since the last re-initialization
+            of the local network management subsystem, then this object
+            contains a zero value."
+    ::= { ifMIBObjects 5 }
+
+-- the Interfaces table
+
+-- The Interfaces table contains information on the entity's
+
+-- interfaces.  Each sub-layer below the internetwork-layer
+-- of a network interface is considered to be an interface.
+
+ifTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF IfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A list of interface entries.  The number of entries is
+            given by the value of ifNumber."
+    ::= { interfaces 2 }
+
+ifEntry OBJECT-TYPE
+    SYNTAX      IfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An entry containing management information applicable to a
+            particular interface."
+    INDEX   { ifIndex }
+    ::= { ifTable 1 }
+
+IfEntry ::=
+    SEQUENCE {
+        ifIndex                 InterfaceIndex,
+        ifDescr                 DisplayString,
+        ifType                  IANAifType,
+        ifMtu                   Integer32,
+        ifSpeed                 Gauge32,
+        ifPhysAddress           PhysAddress,
+        ifAdminStatus           INTEGER,
+        ifOperStatus            INTEGER,
+        ifLastChange            TimeTicks,
+        ifInOctets              Counter32,
+        ifInUcastPkts           Counter32,
+        ifInNUcastPkts          Counter32,  -- deprecated
+        ifInDiscards            Counter32,
+        ifInErrors              Counter32,
+        ifInUnknownProtos       Counter32,
+        ifOutOctets             Counter32,
+        ifOutUcastPkts          Counter32,
+        ifOutNUcastPkts         Counter32,  -- deprecated
+        ifOutDiscards           Counter32,
+        ifOutErrors             Counter32,
+        ifOutQLen               Gauge32,    -- deprecated
+        ifSpecific              OBJECT IDENTIFIER -- deprecated
+    }
+
+ifIndex OBJECT-TYPE
+    SYNTAX      InterfaceIndex
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "A unique value, greater than zero, for each interface.  It
+            is recommended that values are assigned contiguously
+            starting from 1.  The value for each interface sub-layer
+            must remain constant at least from one re-initialization of
+            the entity's network management system to the next re-
+            initialization."
+    ::= { ifEntry 1 }
+
+ifDescr OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE (0..255))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "A textual string containing information about the
+            interface.  This string should include the name of the
+            manufacturer, the product name and the version of the
+            interface hardware/software."
+    ::= { ifEntry 2 }
+
+ifType OBJECT-TYPE
+    SYNTAX      IANAifType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The type of interface.  Additional values for ifType are
+            assigned by the Internet Assigned Numbers Authority (IANA),
+            through updating the syntax of the IANAifType textual
+            convention."
+    ::= { ifEntry 3 }
+
+ifMtu OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The size of the largest packet which can be sent/received
+            on the interface, specified in octets.  For interfaces that
+            are used for transmitting network datagrams, this is the
+            size of the largest network datagram that can be sent on the
+            interface."
+    ::= { ifEntry 4 }
+
+ifSpeed OBJECT-TYPE
+    SYNTAX      Gauge32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "An estimate of the interface's current bandwidth in bits
+            per second.  For interfaces which do not vary in bandwidth
+            or for those where no accurate estimation can be made, this
+            object should contain the nominal bandwidth.  If the
+            bandwidth of the interface is greater than the maximum value
+            reportable by this object then this object should report its
+            maximum value (4,294,967,295) and ifHighSpeed must be used
+            to report the interace's speed.  For a sub-layer which has
+            no concept of bandwidth, this object should be zero."
+    ::= { ifEntry 5 }
+
+ifPhysAddress OBJECT-TYPE
+    SYNTAX      PhysAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The interface's address at its protocol sub-layer.  For
+            example, for an 802.x interface, this object normally
+            contains a MAC address.  The interface's media-specific MIB
+            must define the bit and byte ordering and the format of the
+            value of this object.  For interfaces which do not have such
+            an address (e.g., a serial line), this object should contain
+            an octet string of zero length."
+    ::= { ifEntry 6 }
+
+ifAdminStatus OBJECT-TYPE
+    SYNTAX  INTEGER {
+                up(1),       -- ready to pass packets
+                down(2),
+                testing(3)   -- in some test mode
+            }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "The desired state of the interface.  The testing(3) state
+            indicates that no operational packets can be passed.  When a
+            managed system initializes, all interfaces start with
+            ifAdminStatus in the down(2) state.  As a result of either
+            explicit management action or per configuration information
+            retained by the managed system, ifAdminStatus is then
+            changed to either the up(1) or testing(3) states (or remains
+            in the down(2) state)."
+    ::= { ifEntry 7 }
+
+ifOperStatus OBJECT-TYPE
+    SYNTAX  INTEGER {
+                up(1),        -- ready to pass packets
+                down(2),
+                testing(3),   -- in some test mode
+                unknown(4),   -- status can not be determined
+                              -- for some reason.
+                dormant(5),
+                notPresent(6),    -- some component is missing
+                lowerLayerDown(7) -- down due to state of
+                                  -- lower-layer interface(s)
+            }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The current operational state of the interface.  The
+            testing(3) state indicates that no operational packets can
+            be passed.  If ifAdminStatus is down(2) then ifOperStatus
+            should be down(2).  If ifAdminStatus is changed to up(1)
+            then ifOperStatus should change to up(1) if the interface is
+            ready to transmit and receive network traffic; it should
+            change to dormant(5) if the interface is waiting for
+            external actions (such as a serial line waiting for an
+            incoming connection); it should remain in the down(2) state
+            if and only if there is a fault that prevents it from going
+            to the up(1) state; it should remain in the notPresent(6)
+            state if the interface has missing (typically, hardware)
+            components."
+    ::= { ifEntry 8 }
+
+ifLastChange OBJECT-TYPE
+    SYNTAX      TimeTicks
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The value of sysUpTime at the time the interface entered
+            its current operational state.  If the current state was
+            entered prior to the last re-initialization of the local
+            network management subsystem, then this object contains a
+            zero value."
+    ::= { ifEntry 9 }
+
+ifInOctets OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of octets received on the interface,
+            including framing characters.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifEntry 10 }
+
+ifInUcastPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of packets, delivered by this sub-layer to a
+            higher (sub-)layer, which were not addressed to a multicast
+            or broadcast address at this sub-layer.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifEntry 11 }
+
+ifInNUcastPkts OBJECT-TYPE
+    SYNTAX  Counter32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "The number of packets, delivered by this sub-layer to a
+            higher (sub-)layer, which were addressed to a multicast or
+            broadcast address at this sub-layer.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime.
+
+            This object is deprecated in favour of ifInMulticastPkts and
+            ifInBroadcastPkts."
+    ::= { ifEntry 12 }
+
+ifInDiscards OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of inbound packets which were chosen to be
+            discarded even though no errors had been detected to prevent
+
+            their being deliverable to a higher-layer protocol.  One
+            possible reason for discarding such a packet could be to
+            free up buffer space.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifEntry 13 }
+
+ifInErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "For packet-oriented interfaces, the number of inbound
+            packets that contained errors preventing them from being
+            deliverable to a higher-layer protocol.  For character-
+            oriented or fixed-length interfaces, the number of inbound
+            transmission units that contained errors preventing them
+            from being deliverable to a higher-layer protocol.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifEntry 14 }
+
+ifInUnknownProtos OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "For packet-oriented interfaces, the number of packets
+            received via the interface which were discarded because of
+            an unknown or unsupported protocol.  For character-oriented
+            or fixed-length interfaces that support protocol
+            multiplexing the number of transmission units received via
+            the interface which were discarded because of an unknown or
+            unsupported protocol.  For any interface that does not
+            support protocol multiplexing, this counter will always be
+            0.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifEntry 15 }
+
+ifOutOctets OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of octets transmitted out of the
+            interface, including framing characters.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifEntry 16 }
+
+ifOutUcastPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of packets that higher-level protocols
+            requested be transmitted, and which were not addressed to a
+            multicast or broadcast address at this sub-layer, including
+            those that were discarded or not sent.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifEntry 17 }
+
+ifOutNUcastPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "The total number of packets that higher-level protocols
+            requested be transmitted, and which were addressed to a
+            multicast or broadcast address at this sub-layer, including
+            those that were discarded or not sent.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime.
+
+            This object is deprecated in favour of ifOutMulticastPkts
+            and ifOutBroadcastPkts."
+    ::= { ifEntry 18 }
+
+ifOutDiscards OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of outbound packets which were chosen to be
+            discarded even though no errors had been detected to prevent
+            their being transmitted.  One possible reason for discarding
+            such a packet could be to free up buffer space.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifEntry 19 }
+
+ifOutErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "For packet-oriented interfaces, the number of outbound
+            packets that could not be transmitted because of errors.
+            For character-oriented or fixed-length interfaces, the
+            number of outbound transmission units that could not be
+            transmitted because of errors.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifEntry 20 }
+
+ifOutQLen OBJECT-TYPE
+    SYNTAX      Gauge32
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "The length of the output packet queue (in packets)."
+    ::= { ifEntry 21 }
+
+ifSpecific OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-only
+    STATUS      deprecated
+    DESCRIPTION
+            "A reference to MIB definitions specific to the particular
+            media being used to realize the interface.  It is
+
+            recommended that this value point to an instance of a MIB
+            object in the media-specific MIB, i.e., that this object
+            have the semantics associated with the InstancePointer
+            textual convention defined in RFC 2579.  In fact, it is
+            recommended that the media-specific MIB specify what value
+            ifSpecific should/can take for values of ifType.  If no MIB
+            definitions specific to the particular media are available,
+            the value should be set to the OBJECT IDENTIFIER { 0 0 }."
+    ::= { ifEntry 22 }
+
+--
+--   Extension to the interface table
+--
+-- This table replaces the ifExtnsTable table.
+--
+
+ifXTable        OBJECT-TYPE
+    SYNTAX      SEQUENCE OF IfXEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A list of interface entries.  The number of entries is
+            given by the value of ifNumber.  This table contains
+            additional objects for the interface table."
+    ::= { ifMIBObjects 1 }
+
+ifXEntry        OBJECT-TYPE
+    SYNTAX      IfXEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An entry containing additional management information
+            applicable to a particular interface."
+    AUGMENTS    { ifEntry }
+    ::= { ifXTable 1 }
+
+IfXEntry ::=
+    SEQUENCE {
+        ifName                  DisplayString,
+        ifInMulticastPkts       Counter32,
+        ifInBroadcastPkts       Counter32,
+        ifOutMulticastPkts      Counter32,
+        ifOutBroadcastPkts      Counter32,
+        ifHCInOctets            Counter64,
+        ifHCInUcastPkts         Counter64,
+        ifHCInMulticastPkts     Counter64,
+        ifHCInBroadcastPkts     Counter64,
+        ifHCOutOctets           Counter64,
+        ifHCOutUcastPkts        Counter64,
+        ifHCOutMulticastPkts    Counter64,
+        ifHCOutBroadcastPkts    Counter64,
+        ifLinkUpDownTrapEnable  INTEGER,
+        ifHighSpeed             Gauge32,
+        ifPromiscuousMode       TruthValue,
+        ifConnectorPresent      TruthValue,
+        ifAlias                 DisplayString,
+        ifCounterDiscontinuityTime TimeStamp
+    }
+
+ifName OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The textual name of the interface.  The value of this
+            object should be the name of the interface as assigned by
+            the local device and should be suitable for use in commands
+            entered at the device's `console'.  This might be a text
+            name, such as `le0' or a simple port number, such as `1',
+            depending on the interface naming syntax of the device.  If
+            several entries in the ifTable together represent a single
+            interface as named by the device, then each will have the
+            same value of ifName.  Note that for an agent which responds
+            to SNMP queries concerning an interface on some other
+            (proxied) device, then the value of ifName for such an
+            interface is the proxied device's local name for it.
+
+            If there is no local name, or this object is otherwise not
+            applicable, then this object contains a zero-length string."
+    ::= { ifXEntry 1 }
+
+ifInMulticastPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of packets, delivered by this sub-layer to a
+            higher (sub-)layer, which were addressed to a multicast
+            address at this sub-layer.  For a MAC layer protocol, this
+            includes both Group and Functional addresses.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 2 }
+
+ifInBroadcastPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of packets, delivered by this sub-layer to a
+            higher (sub-)layer, which were addressed to a broadcast
+            address at this sub-layer.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 3 }
+
+ifOutMulticastPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of packets that higher-level protocols
+            requested be transmitted, and which were addressed to a
+            multicast address at this sub-layer, including those that
+            were discarded or not sent.  For a MAC layer protocol, this
+            includes both Group and Functional addresses.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 4 }
+
+ifOutBroadcastPkts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of packets that higher-level protocols
+            requested be transmitted, and which were addressed to a
+            broadcast address at this sub-layer, including those that
+            were discarded or not sent.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 5 }
+
+--
+-- High Capacity Counter objects.  These objects are all
+-- 64 bit versions of the "basic" ifTable counters.  These
+-- objects all have the same basic semantics as their 32-bit
+-- counterparts, however, their syntax has been extended
+-- to 64 bits.
+--
+
+ifHCInOctets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of octets received on the interface,
+            including framing characters.  This object is a 64-bit
+            version of ifInOctets.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 6 }
+
+ifHCInUcastPkts OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of packets, delivered by this sub-layer to a
+            higher (sub-)layer, which were not addressed to a multicast
+            or broadcast address at this sub-layer.  This object is a
+            64-bit version of ifInUcastPkts.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 7 }
+
+ifHCInMulticastPkts OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of packets, delivered by this sub-layer to a
+            higher (sub-)layer, which were addressed to a multicast
+            address at this sub-layer.  For a MAC layer protocol, this
+            includes both Group and Functional addresses.  This object
+            is a 64-bit version of ifInMulticastPkts.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 8 }
+
+ifHCInBroadcastPkts OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The number of packets, delivered by this sub-layer to a
+            higher (sub-)layer, which were addressed to a broadcast
+            address at this sub-layer.  This object is a 64-bit version
+            of ifInBroadcastPkts.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 9 }
+
+ifHCOutOctets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of octets transmitted out of the
+            interface, including framing characters.  This object is a
+            64-bit version of ifOutOctets.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 10 }
+
+ifHCOutUcastPkts OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of packets that higher-level protocols
+            requested be transmitted, and which were not addressed to a
+            multicast or broadcast address at this sub-layer, including
+            those that were discarded or not sent.  This object is a
+            64-bit version of ifOutUcastPkts.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 11 }
+
+ifHCOutMulticastPkts OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of packets that higher-level protocols
+            requested be transmitted, and which were addressed to a
+            multicast address at this sub-layer, including those that
+            were discarded or not sent.  For a MAC layer protocol, this
+            includes both Group and Functional addresses.  This object
+            is a 64-bit version of ifOutMulticastPkts.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 12 }
+
+ifHCOutBroadcastPkts OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The total number of packets that higher-level protocols
+            requested be transmitted, and which were addressed to a
+            broadcast address at this sub-layer, including those that
+            were discarded or not sent.  This object is a 64-bit version
+            of ifOutBroadcastPkts.
+
+            Discontinuities in the value of this counter can occur at
+            re-initialization of the management system, and at other
+            times as indicated by the value of
+            ifCounterDiscontinuityTime."
+    ::= { ifXEntry 13 }
+
+ifLinkUpDownTrapEnable  OBJECT-TYPE
+    SYNTAX      INTEGER { enabled(1), disabled(2) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "Indicates whether linkUp/linkDown traps should be generated
+            for this interface.
+
+            By default, this object should have the value enabled(1) for
+            interfaces which do not operate on 'top' of any other
+            interface (as defined in the ifStackTable), and disabled(2)
+            otherwise."
+    ::= { ifXEntry 14 }
+
+ifHighSpeed OBJECT-TYPE
+    SYNTAX      Gauge32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "An estimate of the interface's current bandwidth in units
+            of 1,000,000 bits per second.  If this object reports a
+            value of `n' then the speed of the interface is somewhere in
+            the range of `n-500,000' to `n+499,999'.  For interfaces
+            which do not vary in bandwidth or for those where no
+            accurate estimation can be made, this object should contain
+            the nominal bandwidth.  For a sub-layer which has no concept
+            of bandwidth, this object should be zero."
+    ::= { ifXEntry 15 }
+
+ifPromiscuousMode  OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "This object has a value of false(2) if this interface only
+            accepts packets/frames that are addressed to this station.
+            This object has a value of true(1) when the station accepts
+            all packets/frames transmitted on the media.  The value
+            true(1) is only legal on certain types of media.  If legal,
+            setting this object to a value of true(1) may require the
+            interface to be reset before becoming effective.
+
+            The value of ifPromiscuousMode does not affect the reception
+            of broadcast and multicast packets/frames by the interface."
+    ::= { ifXEntry 16 }
+
+ifConnectorPresent   OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "This object has the value 'true(1)' if the interface
+            sublayer has a physical connector and the value 'false(2)'
+            otherwise."
+    ::= { ifXEntry 17 }
+
+ifAlias   OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(0..64))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+            "This object is an 'alias' name for the interface as
+            specified by a network manager, and provides a non-volatile
+            'handle' for the interface.
+
+            On the first instantiation of an interface, the value of
+            ifAlias associated with that interface is the zero-length
+            string.  As and when a value is written into an instance of
+            ifAlias through a network management set operation, then the
+            agent must retain the supplied value in the ifAlias instance
+            associated with the same interface for as long as that
+            interface remains instantiated, including across all re-
+            initializations/reboots of the network management system,
+            including those which result in a change of the interface's
+            ifIndex value.
+
+            An example of the value which a network manager might store
+            in this object for a WAN interface is the (Telco's) circuit
+            number/identifier of the interface.
+
+            Some agents may support write-access only for interfaces
+            having particular values of ifType.  An agent which supports
+            write access to this object is required to keep the value in
+            non-volatile storage, but it may limit the length of new
+            values depending on how much storage is already occupied by
+            the current values for other interfaces."
+    ::= { ifXEntry 18 }
+
+ifCounterDiscontinuityTime OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+            "The value of sysUpTime on the most recent occasion at which
+            any one or more of this interface's counters suffered a
+            discontinuity.  The relevant counters are the specific
+            instances associated with this interface of any Counter32 or
+
+            Counter64 object contained in the ifTable or ifXTable.  If
+            no such discontinuities have occurred since the last re-
+            initialization of the local management subsystem, then this
+            object contains a zero value."
+    ::= { ifXEntry 19 }
+
+--           The Interface Stack Group
+--
+-- Implementation of this group is optional, but strongly recommended
+-- for all systems
+--
+
+ifStackTable  OBJECT-TYPE
+     SYNTAX        SEQUENCE OF IfStackEntry
+     MAX-ACCESS    not-accessible
+     STATUS        current
+     DESCRIPTION
+            "The table containing information on the relationships
+            between the multiple sub-layers of network interfaces.  In
+            particular, it contains information on which sub-layers run
+            'on top of' which other sub-layers, where each sub-layer
+            corresponds to a conceptual row in the ifTable.  For
+            example, when the sub-layer with ifIndex value x runs over
+            the sub-layer with ifIndex value y, then this table
+            contains:
+
+              ifStackStatus.x.y=active
+
+            For each ifIndex value, I, which identifies an active
+            interface, there are always at least two instantiated rows
+            in this table associated with I.  For one of these rows, I
+            is the value of ifStackHigherLayer; for the other, I is the
+            value of ifStackLowerLayer.  (If I is not involved in
+            multiplexing, then these are the only two rows associated
+            with I.)
+
+            For example, two rows exist even for an interface which has
+            no others stacked on top or below it:
+
+              ifStackStatus.0.x=active
+              ifStackStatus.x.0=active "
+     ::= { ifMIBObjects 2 }
+
+ifStackEntry  OBJECT-TYPE
+     SYNTAX        IfStackEntry
+     MAX-ACCESS    not-accessible
+     STATUS        current
+     DESCRIPTION
+            "Information on a particular relationship between two sub-
+            layers, specifying that one sub-layer runs on 'top' of the
+            other sub-layer.  Each sub-layer corresponds to a conceptual
+            row in the ifTable."
+     INDEX { ifStackHigherLayer, ifStackLowerLayer }
+     ::= { ifStackTable 1 }
+
+IfStackEntry ::=
+    SEQUENCE {
+        ifStackHigherLayer  InterfaceIndexOrZero,
+        ifStackLowerLayer   InterfaceIndexOrZero,
+        ifStackStatus       RowStatus
+     }
+
+ifStackHigherLayer  OBJECT-TYPE
+     SYNTAX        InterfaceIndexOrZero
+     MAX-ACCESS    not-accessible
+     STATUS        current
+     DESCRIPTION
+            "The value of ifIndex corresponding to the higher sub-layer
+            of the relationship, i.e., the sub-layer which runs on 'top'
+            of the sub-layer identified by the corresponding instance of
+            ifStackLowerLayer.  If there is no higher sub-layer (below
+            the internetwork layer), then this object has the value 0."
+     ::= { ifStackEntry 1 }
+
+ifStackLowerLayer  OBJECT-TYPE
+     SYNTAX        InterfaceIndexOrZero
+     MAX-ACCESS    not-accessible
+     STATUS        current
+     DESCRIPTION
+            "The value of ifIndex corresponding to the lower sub-layer
+            of the relationship, i.e., the sub-layer which runs 'below'
+            the sub-layer identified by the corresponding instance of
+            ifStackHigherLayer.  If there is no lower sub-layer, then
+            this object has the value 0."
+     ::= { ifStackEntry 2 }
+
+ifStackStatus  OBJECT-TYPE
+    SYNTAX         RowStatus
+    MAX-ACCESS     read-create
+    STATUS         current
+    DESCRIPTION
+            "The status of the relationship between two sub-layers.
+
+            Changing the value of this object from 'active' to
+            'notInService' or 'destroy' will likely have consequences up
+            and down the interface stack.  Thus, write access to this
+            object is likely to be inappropriate for some types of
+            interfaces, and many implementations will choose not to
+            support write-access for any type of interface."
+    ::= { ifStackEntry 3 }
+
+ifStackLastChange OBJECT-TYPE
+    SYNTAX         TimeTicks
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION
+            "The value of sysUpTime at the time of the last change of
+            the (whole) interface stack.  A change of the interface
+            stack is defined to be any creation, deletion, or change in
+            value of any instance of ifStackStatus.  If the interface
+            stack has been unchanged since the last re-initialization of
+            the local network management subsystem, then this object
+            contains a zero value."
+    ::= { ifMIBObjects 6 }
+
+--   Generic Receive Address Table
+--
+-- This group of objects is mandatory for all types of
+-- interfaces which can receive packets/frames addressed to
+-- more than one address.
+--
+-- This table replaces the ifExtnsRcvAddr table.  The main
+-- difference is that this table makes use of the RowStatus
+-- textual convention, while ifExtnsRcvAddr did not.
+
+ifRcvAddressTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF IfRcvAddressEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "This table contains an entry for each address (broadcast,
+            multicast, or uni-cast) for which the system will receive
+            packets/frames on a particular interface, except as follows:
+
+            - for an interface operating in promiscuous mode, entries
+            are only required for those addresses for which the system
+            would receive frames were it not operating in promiscuous
+            mode.
+
+            - for 802.5 functional addresses, only one entry is
+            required, for the address which has the functional address
+            bit ANDed with the bit mask of all functional addresses for
+            which the interface will accept frames.
+
+            A system is normally able to use any unicast address which
+            corresponds to an entry in this table as a source address."
+    ::= { ifMIBObjects 4 }
+
+ifRcvAddressEntry  OBJECT-TYPE
+    SYNTAX      IfRcvAddressEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "A list of objects identifying an address for which the
+            system will accept packets/frames on the particular
+            interface identified by the index value ifIndex."
+    INDEX  { ifIndex, ifRcvAddressAddress }
+    ::= { ifRcvAddressTable 1 }
+
+IfRcvAddressEntry ::=
+    SEQUENCE {
+        ifRcvAddressAddress   PhysAddress,
+        ifRcvAddressStatus    RowStatus,
+        ifRcvAddressType      INTEGER
+    }
+
+ifRcvAddressAddress OBJECT-TYPE
+    SYNTAX      PhysAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "An address for which the system will accept packets/frames
+            on this entry's interface."
+    ::= { ifRcvAddressEntry 1 }
+
+ifRcvAddressStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "This object is used to create and delete rows in the
+            ifRcvAddressTable."
+    ::= { ifRcvAddressEntry 2 }
+
+ifRcvAddressType OBJECT-TYPE
+    SYNTAX      INTEGER {
+
+                    other(1),
+                    volatile(2),
+                    nonVolatile(3)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+            "This object has the value nonVolatile(3) for those entries
+            in the table which are valid and will not be deleted by the
+            next restart of the managed system.  Entries having the
+            value volatile(2) are valid and exist, but have not been
+            saved, so that will not exist after the next restart of the
+            managed system.  Entries having the value other(1) are valid
+            and exist but are not classified as to whether they will
+            continue to exist after the next restart."
+    DEFVAL  { volatile }
+    ::= { ifRcvAddressEntry 3 }
+
+-- definition of interface-related traps.
+
+linkDown NOTIFICATION-TYPE
+    OBJECTS { ifIndex, ifAdminStatus, ifOperStatus }
+    STATUS  current
+    DESCRIPTION
+            "A linkDown trap signifies that the SNMP entity, acting in
+            an agent role, has detected that the ifOperStatus object for
+            one of its communication links is about to enter the down
+            state from some other state (but not from the notPresent
+            state).  This other state is indicated by the included value
+            of ifOperStatus."
+    ::= { snmpTraps 3 }
+
+linkUp NOTIFICATION-TYPE
+    OBJECTS { ifIndex, ifAdminStatus, ifOperStatus }
+    STATUS  current
+    DESCRIPTION
+            "A linkUp trap signifies that the SNMP entity, acting in an
+            agent role, has detected that the ifOperStatus object for
+            one of its communication links left the down state and
+            transitioned into some other state (but not into the
+            notPresent state).  This other state is indicated by the
+            included value of ifOperStatus."
+    ::= { snmpTraps 4 }
+
+-- conformance information
+
+ifConformance OBJECT IDENTIFIER ::= { ifMIB 2 }
+
+ifGroups      OBJECT IDENTIFIER ::= { ifConformance 1 }
+ifCompliances OBJECT IDENTIFIER ::= { ifConformance 2 }
+
+-- compliance statements
+
+ifCompliance3 MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The compliance statement for SNMP entities which have
+            network interfaces."
+
+    MODULE  -- this module
+        MANDATORY-GROUPS { ifGeneralInformationGroup,
+                           linkUpDownNotificationsGroup }
+
+-- The groups:
+--        ifFixedLengthGroup
+--        ifHCFixedLengthGroup
+--        ifPacketGroup
+--        ifHCPacketGroup
+--        ifVHCPacketGroup
+-- are mutually exclusive; at most one of these groups is implemented
+-- for a particular interface.  When any of these groups is implemented
+-- for a particular interface, then ifCounterDiscontinuityGroup must
+-- also be implemented for that interface.
+
+        GROUP       ifFixedLengthGroup
+        DESCRIPTION
+            "This group is mandatory for those network interfaces which
+            are character-oriented or transmit data in fixed-length
+            transmission units, and for which the value of the
+            corresponding instance of ifSpeed is less than or equal to
+            20,000,000 bits/second."
+
+        GROUP       ifHCFixedLengthGroup
+        DESCRIPTION
+            "This group is mandatory for those network interfaces which
+            are character-oriented or transmit data in fixed-length
+            transmission units, and for which the value of the
+            corresponding instance of ifSpeed is greater than 20,000,000
+            bits/second."
+
+        GROUP       ifPacketGroup
+        DESCRIPTION
+            "This group is mandatory for those network interfaces which
+            are packet-oriented, and for which the value of the
+            corresponding instance of ifSpeed is less than or equal to
+            20,000,000 bits/second."
+
+        GROUP       ifHCPacketGroup
+        DESCRIPTION
+            "This group is mandatory only for those network interfaces
+            which are packet-oriented and for which the value of the
+            corresponding instance of ifSpeed is greater than 20,000,000
+            bits/second but less than or equal to 650,000,000
+            bits/second."
+
+        GROUP       ifVHCPacketGroup
+        DESCRIPTION
+            "This group is mandatory only for those network interfaces
+            which are packet-oriented and for which the value of the
+            corresponding instance of ifSpeed is greater than
+            650,000,000 bits/second."
+
+        GROUP       ifCounterDiscontinuityGroup
+        DESCRIPTION
+            "This group is mandatory for those network interfaces that
+            are required to maintain counters (i.e., those for which one
+            of the ifFixedLengthGroup, ifHCFixedLengthGroup,
+            ifPacketGroup, ifHCPacketGroup, or ifVHCPacketGroup is
+            mandatory)."
+
+        GROUP       ifRcvAddressGroup
+        DESCRIPTION
+            "The applicability of this group MUST be defined by the
+            media-specific MIBs.  Media-specific MIBs must define the
+            exact meaning, use, and semantics of the addresses in this
+            group."
+
+        OBJECT      ifLinkUpDownTrapEnable
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      ifPromiscuousMode
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT       ifAdminStatus
+        SYNTAX       INTEGER { up(1), down(2) }
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required, nor is support for the value
+            testing(3)."
+
+        OBJECT       ifAlias
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+    ::= { ifCompliances 3 }
+
+-- units of conformance
+
+ifGeneralInformationGroup    OBJECT-GROUP
+    OBJECTS { ifIndex, ifDescr, ifType, ifSpeed, ifPhysAddress,
+              ifAdminStatus, ifOperStatus, ifLastChange,
+              ifLinkUpDownTrapEnable, ifConnectorPresent,
+              ifHighSpeed, ifName, ifNumber, ifAlias,
+              ifTableLastChange }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information applicable to
+            all network interfaces."
+    ::= { ifGroups 10 }
+
+-- the following five groups are mutually exclusive; at most
+-- one of these groups is implemented for any interface
+
+ifFixedLengthGroup    OBJECT-GROUP
+    OBJECTS { ifInOctets, ifOutOctets, ifInUnknownProtos,
+              ifInErrors, ifOutErrors }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information specific to
+            non-high speed (non-high speed interfaces transmit and
+            receive at speeds less than or equal to 20,000,000
+            bits/second) character-oriented or fixed-length-transmission
+            network interfaces."
+    ::= { ifGroups 2 }
+
+ifHCFixedLengthGroup    OBJECT-GROUP
+    OBJECTS { ifHCInOctets, ifHCOutOctets,
+              ifInOctets, ifOutOctets, ifInUnknownProtos,
+              ifInErrors, ifOutErrors }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information specific to
+            high speed (greater than 20,000,000 bits/second) character-
+            oriented or fixed-length-transmission network interfaces."
+    ::= { ifGroups 3 }
+
+ifPacketGroup    OBJECT-GROUP
+    OBJECTS { ifInOctets, ifOutOctets, ifInUnknownProtos,
+              ifInErrors, ifOutErrors,
+              ifMtu, ifInUcastPkts, ifInMulticastPkts,
+              ifInBroadcastPkts, ifInDiscards,
+              ifOutUcastPkts, ifOutMulticastPkts,
+              ifOutBroadcastPkts, ifOutDiscards,
+              ifPromiscuousMode }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information specific to
+            non-high speed (non-high speed interfaces transmit and
+            receive at speeds less than or equal to 20,000,000
+            bits/second) packet-oriented network interfaces."
+    ::= { ifGroups 4 }
+
+ifHCPacketGroup    OBJECT-GROUP
+    OBJECTS { ifHCInOctets, ifHCOutOctets,
+              ifInOctets, ifOutOctets, ifInUnknownProtos,
+              ifInErrors, ifOutErrors,
+              ifMtu, ifInUcastPkts, ifInMulticastPkts,
+              ifInBroadcastPkts, ifInDiscards,
+              ifOutUcastPkts, ifOutMulticastPkts,
+              ifOutBroadcastPkts, ifOutDiscards,
+              ifPromiscuousMode }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information specific to
+            high speed (greater than 20,000,000 bits/second but less
+            than or equal to 650,000,000 bits/second) packet-oriented
+            network interfaces."
+    ::= { ifGroups 5 }
+
+ifVHCPacketGroup    OBJECT-GROUP
+    OBJECTS { ifHCInUcastPkts, ifHCInMulticastPkts,
+              ifHCInBroadcastPkts, ifHCOutUcastPkts,
+              ifHCOutMulticastPkts, ifHCOutBroadcastPkts,
+              ifHCInOctets, ifHCOutOctets,
+              ifInOctets, ifOutOctets, ifInUnknownProtos,
+              ifInErrors, ifOutErrors,
+              ifMtu, ifInUcastPkts, ifInMulticastPkts,
+              ifInBroadcastPkts, ifInDiscards,
+              ifOutUcastPkts, ifOutMulticastPkts,
+              ifOutBroadcastPkts, ifOutDiscards,
+              ifPromiscuousMode }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information specific to
+            higher speed (greater than 650,000,000 bits/second) packet-
+            oriented network interfaces."
+    ::= { ifGroups 6 }
+
+ifRcvAddressGroup    OBJECT-GROUP
+    OBJECTS { ifRcvAddressStatus, ifRcvAddressType }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information on the
+            multiple addresses which an interface receives."
+    ::= { ifGroups 7 }
+
+ifStackGroup2    OBJECT-GROUP
+    OBJECTS { ifStackStatus, ifStackLastChange }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information on the
+            layering of MIB-II interfaces."
+    ::= { ifGroups 11 }
+
+ifCounterDiscontinuityGroup  OBJECT-GROUP
+    OBJECTS { ifCounterDiscontinuityTime }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects providing information specific to
+            interface counter discontinuities."
+    ::= { ifGroups 13 }
+
+linkUpDownNotificationsGroup  NOTIFICATION-GROUP
+    NOTIFICATIONS { linkUp, linkDown }
+    STATUS  current
+    DESCRIPTION
+            "The notifications which indicate specific changes in the
+            value of ifOperStatus."
+    ::= { ifGroups 14 }
+
+-- Deprecated Definitions - Objects
+
+--
+--    The Interface Test Table
+--
+-- This group of objects is optional.  However, a media-specific
+
+-- MIB may make implementation of this group mandatory.
+--
+-- This table replaces the ifExtnsTestTable
+--
+
+ifTestTable   OBJECT-TYPE
+    SYNTAX      SEQUENCE OF IfTestEntry
+    MAX-ACCESS  not-accessible
+    STATUS      deprecated
+    DESCRIPTION
+            "This table contains one entry per interface.  It defines
+            objects which allow a network manager to instruct an agent
+            to test an interface for various faults.  Tests for an
+            interface are defined in the media-specific MIB for that
+            interface.  After invoking a test, the object ifTestResult
+            can be read to determine the outcome.  If an agent can not
+            perform the test, ifTestResult is set to so indicate.  The
+            object ifTestCode can be used to provide further test-
+            specific or interface-specific (or even enterprise-specific)
+            information concerning the outcome of the test.  Only one
+            test can be in progress on each interface at any one time.
+            If one test is in progress when another test is invoked, the
+            second test is rejected.  Some agents may reject a test when
+            a prior test is active on another interface.
+
+            Before starting a test, a manager-station must first obtain
+            'ownership' of the entry in the ifTestTable for the
+            interface to be tested.  This is accomplished with the
+            ifTestId and ifTestStatus objects as follows:
+
+          try_again:
+              get (ifTestId, ifTestStatus)
+              while (ifTestStatus != notInUse)
+                  /*
+                   * Loop while a test is running or some other
+                   * manager is configuring a test.
+                   */
+                  short delay
+                  get (ifTestId, ifTestStatus)
+              }
+
+              /*
+               * Is not being used right now -- let's compete
+               * to see who gets it.
+               */
+              lock_value = ifTestId
+
+              if ( set(ifTestId = lock_value, ifTestStatus = inUse,
+                       ifTestOwner = 'my-IP-address') == FAILURE)
+                  /*
+                   * Another manager got the ifTestEntry -- go
+                   * try again
+                   */
+                  goto try_again;
+
+              /*
+               * I have the lock
+               */
+              set up any test parameters.
+
+              /*
+               * This starts the test
+               */
+              set(ifTestType = test_to_run);
+
+              wait for test completion by polling ifTestResult
+
+              when test completes, agent sets ifTestResult
+                   agent also sets ifTestStatus = 'notInUse'
+
+              retrieve any additional test results, and ifTestId
+
+              if (ifTestId == lock_value+1) results are valid
+
+            A manager station first retrieves the value of the
+            appropriate ifTestId and ifTestStatus objects, periodically
+            repeating the retrieval if necessary, until the value of
+            ifTestStatus is 'notInUse'.  The manager station then tries
+            to set the same ifTestId object to the value it just
+            retrieved, the same ifTestStatus object to 'inUse', and the
+            corresponding ifTestOwner object to a value indicating
+            itself.  If the set operation succeeds then the manager has
+            obtained ownership of the ifTestEntry, and the value of the
+            ifTestId object is incremented by the agent (per the
+            semantics of TestAndIncr).  Failure of the set operation
+            indicates that some other manager has obtained ownership of
+            the ifTestEntry.
+
+            Once ownership is obtained, any test parameters can be
+            setup, and then the test is initiated by setting ifTestType.
+            On completion of the test, the agent sets ifTestStatus to
+            'notInUse'.  Once this occurs, the manager can retrieve the
+            results.  In the (rare) event that the invocation of tests
+            by two network managers were to overlap, then there would be
+            a possibility that the first test's results might be
+            overwritten by the second test's results prior to the first
+
+            results being read.  This unlikely circumstance can be
+            detected by a network manager retrieving ifTestId at the
+            same time as retrieving the test results, and ensuring that
+            the results are for the desired request.
+
+            If ifTestType is not set within an abnormally long period of
+            time after ownership is obtained, the agent should time-out
+            the manager, and reset the value of the ifTestStatus object
+            back to 'notInUse'.  It is suggested that this time-out
+            period be 5 minutes.
+
+            In general, a management station must not retransmit a
+            request to invoke a test for which it does not receive a
+            response; instead, it properly inspects an agent's MIB to
+            determine if the invocation was successful.  Only if the
+            invocation was unsuccessful, is the invocation request
+            retransmitted.
+
+            Some tests may require the interface to be taken off-line in
+            order to execute them, or may even require the agent to
+            reboot after completion of the test.  In these
+            circumstances, communication with the management station
+            invoking the test may be lost until after completion of the
+            test.  An agent is not required to support such tests.
+            However, if such tests are supported, then the agent should
+            make every effort to transmit a response to the request
+            which invoked the test prior to losing communication.  When
+            the agent is restored to normal service, the results of the
+            test are properly made available in the appropriate objects.
+            Note that this requires that the ifIndex value assigned to
+            an interface must be unchanged even if the test causes a
+            reboot.  An agent must reject any test for which it cannot,
+            perhaps due to resource constraints, make available at least
+            the minimum amount of information after that test
+            completes."
+    ::= { ifMIBObjects 3 }
+
+ifTestEntry OBJECT-TYPE
+    SYNTAX       IfTestEntry
+    MAX-ACCESS   not-accessible
+    STATUS       deprecated
+    DESCRIPTION
+            "An entry containing objects for invoking tests on an
+            interface."
+    AUGMENTS  { ifEntry }
+    ::= { ifTestTable 1 }
+
+IfTestEntry ::=
+
+    SEQUENCE {
+        ifTestId           TestAndIncr,
+        ifTestStatus       INTEGER,
+        ifTestType         AutonomousType,
+        ifTestResult       INTEGER,
+        ifTestCode         OBJECT IDENTIFIER,
+        ifTestOwner        OwnerString
+    }
+
+ifTestId         OBJECT-TYPE
+    SYNTAX       TestAndIncr
+    MAX-ACCESS   read-write
+    STATUS       deprecated
+    DESCRIPTION
+            "This object identifies the current invocation of the
+            interface's test."
+    ::= { ifTestEntry 1 }
+
+ifTestStatus     OBJECT-TYPE
+    SYNTAX       INTEGER { notInUse(1), inUse(2) }
+    MAX-ACCESS   read-write
+    STATUS       deprecated
+    DESCRIPTION
+            "This object indicates whether or not some manager currently
+            has the necessary 'ownership' required to invoke a test on
+            this interface.  A write to this object is only successful
+            when it changes its value from 'notInUse(1)' to 'inUse(2)'.
+            After completion of a test, the agent resets the value back
+            to 'notInUse(1)'."
+    ::= { ifTestEntry 2 }
+
+ifTestType       OBJECT-TYPE
+    SYNTAX       AutonomousType
+    MAX-ACCESS   read-write
+    STATUS       deprecated
+    DESCRIPTION
+            "A control variable used to start and stop operator-
+            initiated interface tests.  Most OBJECT IDENTIFIER values
+            assigned to tests are defined elsewhere, in association with
+            specific types of interface.  However, this document assigns
+            a value for a full-duplex loopback test, and defines the
+            special meanings of the subject identifier:
+
+                noTest  OBJECT IDENTIFIER ::= { 0 0 }
+
+            When the value noTest is written to this object, no action
+            is taken unless a test is in progress, in which case the
+            test is aborted.  Writing any other value to this object is
+
+            only valid when no test is currently in progress, in which
+            case the indicated test is initiated.
+
+            When read, this object always returns the most recent value
+            that ifTestType was set to.  If it has not been set since
+            the last initialization of the network management subsystem
+            on the agent, a value of noTest is returned."
+    ::= { ifTestEntry 3 }
+
+ifTestResult  OBJECT-TYPE
+    SYNTAX       INTEGER {
+                     none(1),          -- no test yet requested
+                     success(2),
+                     inProgress(3),
+                     notSupported(4),
+                     unAbleToRun(5),   -- due to state of system
+                     aborted(6),
+                     failed(7)
+                 }
+    MAX-ACCESS   read-only
+    STATUS       deprecated
+    DESCRIPTION
+            "This object contains the result of the most recently
+            requested test, or the value none(1) if no tests have been
+            requested since the last reset.  Note that this facility
+            provides no provision for saving the results of one test
+            when starting another, as could be required if used by
+            multiple managers concurrently."
+    ::= { ifTestEntry 4 }
+
+ifTestCode  OBJECT-TYPE
+    SYNTAX       OBJECT IDENTIFIER
+    MAX-ACCESS   read-only
+    STATUS       deprecated
+    DESCRIPTION
+            "This object contains a code which contains more specific
+            information on the test result, for example an error-code
+            after a failed test.  Error codes and other values this
+            object may take are specific to the type of interface and/or
+            test.  The value may have the semantics of either the
+            AutonomousType or InstancePointer textual conventions as
+            defined in RFC 2579.  The identifier:
+
+                testCodeUnknown  OBJECT IDENTIFIER ::= { 0 0 }
+
+            is defined for use if no additional result code is
+            available."
+    ::= { ifTestEntry 5 }
+
+ifTestOwner      OBJECT-TYPE
+    SYNTAX       OwnerString
+    MAX-ACCESS   read-write
+    STATUS       deprecated
+    DESCRIPTION
+            "The entity which currently has the 'ownership' required to
+            invoke a test on this interface."
+    ::= { ifTestEntry 6 }
+
+-- Deprecated Definitions - Groups
+
+ifGeneralGroup    OBJECT-GROUP
+    OBJECTS { ifDescr, ifType, ifSpeed, ifPhysAddress,
+              ifAdminStatus, ifOperStatus, ifLastChange,
+              ifLinkUpDownTrapEnable, ifConnectorPresent,
+              ifHighSpeed, ifName }
+    STATUS  deprecated
+    DESCRIPTION
+            "A collection of objects deprecated in favour of
+            ifGeneralInformationGroup."
+    ::= { ifGroups 1 }
+
+ifTestGroup    OBJECT-GROUP
+    OBJECTS { ifTestId, ifTestStatus, ifTestType,
+              ifTestResult, ifTestCode, ifTestOwner }
+    STATUS  deprecated
+    DESCRIPTION
+            "A collection of objects providing the ability to invoke
+            tests on an interface."
+    ::= { ifGroups 8 }
+
+ifStackGroup    OBJECT-GROUP
+    OBJECTS { ifStackStatus }
+    STATUS  deprecated
+    DESCRIPTION
+            "The previous collection of objects providing information on
+            the layering of MIB-II interfaces."
+    ::= { ifGroups 9 }
+
+ifOldObjectsGroup    OBJECT-GROUP
+    OBJECTS { ifInNUcastPkts, ifOutNUcastPkts,
+              ifOutQLen, ifSpecific }
+    STATUS  deprecated
+    DESCRIPTION
+            "The collection of objects deprecated from the original MIB-
+            II interfaces group."
+    ::= { ifGroups 12 }
+
+-- Deprecated Definitions - Compliance
+
+ifCompliance MODULE-COMPLIANCE
+    STATUS  deprecated
+    DESCRIPTION
+            "A compliance statement defined in a previous version of
+            this MIB module, for SNMP entities which have network
+            interfaces."
+
+    MODULE  -- this module
+        MANDATORY-GROUPS { ifGeneralGroup, ifStackGroup }
+
+        GROUP       ifFixedLengthGroup
+        DESCRIPTION
+            "This group is mandatory for all network interfaces which
+            are character-oriented or transmit data in fixed-length
+            transmission units."
+
+        GROUP       ifHCFixedLengthGroup
+        DESCRIPTION
+            "This group is mandatory only for those network interfaces
+            which are character-oriented or transmit data in fixed-
+            length transmission units, and for which the value of the
+            corresponding instance of ifSpeed is greater than 20,000,000
+            bits/second."
+
+        GROUP       ifPacketGroup
+        DESCRIPTION
+            "This group is mandatory for all network interfaces which
+            are packet-oriented."
+
+        GROUP       ifHCPacketGroup
+        DESCRIPTION
+            "This group is mandatory only for those network interfaces
+            which are packet-oriented and for which the value of the
+            corresponding instance of ifSpeed is greater than
+            650,000,000 bits/second."
+
+        GROUP       ifTestGroup
+        DESCRIPTION
+            "This group is optional.  Media-specific MIBs which require
+            interface tests are strongly encouraged to use this group
+            for invoking tests and reporting results.  A medium specific
+            MIB which has mandatory tests may make implementation of
+
+            this group mandatory."
+
+        GROUP       ifRcvAddressGroup
+        DESCRIPTION
+            "The applicability of this group MUST be defined by the
+            media-specific MIBs.  Media-specific MIBs must define the
+            exact meaning, use, and semantics of the addresses in this
+            group."
+
+        OBJECT      ifLinkUpDownTrapEnable
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      ifPromiscuousMode
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      ifStackStatus
+        SYNTAX      INTEGER { active(1) } -- subset of RowStatus
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required, and only one of the six
+            enumerated values for the RowStatus textual convention need
+            be supported, specifically: active(1)."
+
+        OBJECT       ifAdminStatus
+        SYNTAX       INTEGER { up(1), down(2) }
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required, nor is support for the value
+            testing(3)."
+    ::= { ifCompliances 1 }
+
+ifCompliance2 MODULE-COMPLIANCE
+    STATUS      deprecated
+    DESCRIPTION
+            "A compliance statement defined in a previous version of
+            this MIB module, for SNMP entities which have network
+            interfaces."
+
+    MODULE  -- this module
+        MANDATORY-GROUPS { ifGeneralInformationGroup, ifStackGroup2,
+                           ifCounterDiscontinuityGroup }
+
+        GROUP       ifFixedLengthGroup
+        DESCRIPTION
+            "This group is mandatory for all network interfaces which
+            are character-oriented or transmit data in fixed-length
+            transmission units."
+
+        GROUP       ifHCFixedLengthGroup
+        DESCRIPTION
+            "This group is mandatory only for those network interfaces
+            which are character-oriented or transmit data in fixed-
+            length transmission units, and for which the value of the
+            corresponding instance of ifSpeed is greater than 20,000,000
+            bits/second."
+
+        GROUP       ifPacketGroup
+        DESCRIPTION
+            "This group is mandatory for all network interfaces which
+            are packet-oriented."
+
+        GROUP       ifHCPacketGroup
+        DESCRIPTION
+            "This group is mandatory only for those network interfaces
+            which are packet-oriented and for which the value of the
+            corresponding instance of ifSpeed is greater than
+            650,000,000 bits/second."
+
+        GROUP       ifRcvAddressGroup
+        DESCRIPTION
+            "The applicability of this group MUST be defined by the
+            media-specific MIBs.  Media-specific MIBs must define the
+            exact meaning, use, and semantics of the addresses in this
+            group."
+
+        OBJECT      ifLinkUpDownTrapEnable
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      ifPromiscuousMode
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      ifStackStatus
+        SYNTAX      INTEGER { active(1) } -- subset of RowStatus
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required, and only one of the six
+            enumerated values for the RowStatus textual convention need
+            be supported, specifically: active(1)."
+
+        OBJECT       ifAdminStatus
+        SYNTAX       INTEGER { up(1), down(2) }
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required, nor is support for the value
+            testing(3)."
+
+        OBJECT       ifAlias
+        MIN-ACCESS   read-only
+        DESCRIPTION
+            "Write access is not required."
+    ::= { ifCompliances 2 }
+
+END