diff options
| author | Christian Poessinger <christian@poessinger.com> | 2021-06-22 18:34:21 +0200 |
|---|---|---|
| committer | Christian Poessinger <christian@poessinger.com> | 2021-06-22 18:34:58 +0200 |
| commit | 47604c76587cc6cb7742e91940de2f40ad6d7eb0 (patch) | |
| tree | 719d4d06886b6c4855e3940781778a33ca4f19d3 /mibs/OSPF-MIB.txt | |
| parent | debd7996f89b01fa8d3584efbcda9a5675ee4344 (diff) | |
| download | vyos-1x-47604c76587cc6cb7742e91940de2f40ad6d7eb0.tar.gz vyos-1x-47604c76587cc6cb7742e91940de2f40ad6d7eb0.zip | |
snmp: T3606: Install MIBs into well known location
FRR also expects the MIBs in /usr/share/snmp/mibs
Diffstat (limited to 'mibs/OSPF-MIB.txt')
| -rw-r--r-- | mibs/OSPF-MIB.txt | 2723 |
1 files changed, 2723 insertions, 0 deletions
diff --git a/mibs/OSPF-MIB.txt b/mibs/OSPF-MIB.txt new file mode 100644 index 000000000..de7d03f5e --- /dev/null +++ b/mibs/OSPF-MIB.txt @@ -0,0 +1,2723 @@ +OSPF-MIB DEFINITIONS ::= BEGIN + + IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32, + Integer32, IpAddress + FROM SNMPv2-SMI + TEXTUAL-CONVENTION, TruthValue, RowStatus + FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF + mib-2 FROM RFC1213-MIB; + +-- This MIB module uses the extended OBJECT-TYPE macro as +-- defined in [9]. + +ospf MODULE-IDENTITY + LAST-UPDATED "9501201225Z" -- Fri Jan 20 12:25:50 PST 1995 + ORGANIZATION "IETF OSPF Working Group" + CONTACT-INFO + " Fred Baker + Postal: Cisco Systems + 519 Lado Drive + Santa Barbara, California 93111 + Tel: +1 805 681 0115 + E-Mail: fred@cisco.com + + Rob Coltun + Postal: RainbowBridge Communications + Tel: (301) 340-9416 + E-Mail: rcoltun@rainbow-bridge.com" + DESCRIPTION + "The MIB module to describe the OSPF Version 2 + Protocol" + ::= { mib-2 14 } + +-- The Area ID, in OSPF, has the same format as an IP Address, +-- but has the function of defining a summarization point for +-- Link State Advertisements + +AreaID ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "An OSPF Area Identifier." + SYNTAX IpAddress + + +-- The Router ID, in OSPF, has the same format as an IP Address, +-- but identifies the router independent of its IP Address. + +RouterID ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A OSPF Router Identifier." + SYNTAX IpAddress + + +-- The OSPF Metric is defined as an unsigned value in the range + +Metric ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The OSPF Internal Metric." + SYNTAX Integer32 (0..'FFFF'h) + +BigMetric ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The OSPF External Metric." + SYNTAX Integer32 (0..'FFFFFF'h) + +-- Status Values + +Status ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The status of an interface: 'enabled' indicates that + it is willing to communicate with other OSPF Routers, + while 'disabled' indicates that it is not." + SYNTAX INTEGER { enabled (1), disabled (2) } + +-- Time Durations measured in seconds + +PositiveInteger ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A positive integer. Values in excess are precluded as + unnecessary and prone to interoperability issues." + SYNTAX Integer32 (0..'7FFFFFFF'h) + +HelloRange ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The range of intervals on which hello messages are + exchanged." + SYNTAX Integer32 (1..'FFFF'h) + +UpToMaxAge ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The values that one might find or configure for + variables bounded by the maximum age of an LSA." + SYNTAX Integer32 (0..3600) + + +-- The range of ifIndex + +InterfaceIndex ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The range of ifIndex." + SYNTAX Integer32 + + +-- Potential Priorities for the Designated Router Election + +DesignatedRouterPriority ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The values defined for the priority of a system for + becoming the designated router." + SYNTAX Integer32 (0..'FF'h) + +TOSType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Type of Service is defined as a mapping to the IP Type of + Service Flags as defined in the IP Forwarding Table MIB + + +-----+-----+-----+-----+-----+-----+-----+-----+ + | | | | + | PRECEDENCE | TYPE OF SERVICE | 0 | + | | | | + +-----+-----+-----+-----+-----+-----+-----+-----+ + + IP TOS IP TOS + Field Policy Field Policy + + Contents Code Contents Code + 0 0 0 0 ==> 0 0 0 0 1 ==> 2 + 0 0 1 0 ==> 4 0 0 1 1 ==> 6 + 0 1 0 0 ==> 8 0 1 0 1 ==> 10 + 0 1 1 0 ==> 12 0 1 1 1 ==> 14 + 1 0 0 0 ==> 16 1 0 0 1 ==> 18 + 1 0 1 0 ==> 20 1 0 1 1 ==> 22 + 1 1 0 0 ==> 24 1 1 0 1 ==> 26 + 1 1 1 0 ==> 28 1 1 1 1 ==> 30 + + The remaining values are left for future definition." + SYNTAX Integer32 (0..30) + + +-- OSPF General Variables + +-- These parameters apply globally to the Router's +-- OSPF Process. + +ospfGeneralGroup OBJECT IDENTIFIER ::= { ospf 1 } + + + ospfRouterId OBJECT-TYPE + SYNTAX RouterID + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A 32-bit integer uniquely identifying the + router in the Autonomous System. + + By convention, to ensure uniqueness, this + should default to the value of one of the + router's IP interface addresses." + REFERENCE + "OSPF Version 2, C.1 Global parameters" + ::= { ospfGeneralGroup 1 } + + + ospfAdminStat OBJECT-TYPE + SYNTAX Status + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The administrative status of OSPF in the + router. The value 'enabled' denotes that the + OSPF Process is active on at least one inter- + face; 'disabled' disables it on all inter- + faces." + ::= { ospfGeneralGroup 2 } + + ospfVersionNumber OBJECT-TYPE + SYNTAX INTEGER { version2 (2) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current version number of the OSPF proto- + col is 2." + REFERENCE + "OSPF Version 2, Title" + ::= { ospfGeneralGroup 3 } + + + ospfAreaBdrRtrStatus OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A flag to note whether this router is an area + border router." + REFERENCE + "OSPF Version 2, Section 3 Splitting the AS into + Areas" + ::= { ospfGeneralGroup 4 } + + + ospfASBdrRtrStatus OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A flag to note whether this router is config- + ured as an Autonomous System border router." + REFERENCE + "OSPF Version 2, Section 3.3 Classification of + routers" + ::= { ospfGeneralGroup 5 } + + ospfExternLsaCount OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of external (LS type 5) link-state + advertisements in the link-state database." + REFERENCE + "OSPF Version 2, Appendix A.4.5 AS external link + advertisements" + ::= { ospfGeneralGroup 6 } + + + ospfExternLsaCksumSum OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The 32-bit unsigned sum of the LS checksums of + the external link-state advertisements con- + tained in the link-state database. This sum + can be used to determine if there has been a + change in a router's link state database, and + to compare the link-state database of two + routers." + ::= { ospfGeneralGroup 7 } + + + ospfTOSSupport OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The router's support for type-of-service rout- + ing." + REFERENCE + "OSPF Version 2, Appendix F.1.2 Optional TOS + support" + ::= { ospfGeneralGroup 8 } + + ospfOriginateNewLsas OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of new link-state advertisements + that have been originated. This number is in- + cremented each time the router originates a new + LSA." + ::= { ospfGeneralGroup 9 } + + + ospfRxNewLsas OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of link-state advertisements re- + ceived determined to be new instantiations. + This number does not include newer instantia- + tions of self-originated link-state advertise- + ments." + ::= { ospfGeneralGroup 10 } + + ospfExtLsdbLimit OBJECT-TYPE + SYNTAX Integer32 (-1..'7FFFFFFF'h) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The maximum number of non-default AS- + external-LSAs entries that can be stored in the + link-state database. If the value is -1, then + there is no limit. + + When the number of non-default AS-external-LSAs + in a router's link-state database reaches + ospfExtLsdbLimit, the router enters Overflow- + State. The router never holds more than + ospfExtLsdbLimit non-default AS-external-LSAs + in its database. OspfExtLsdbLimit MUST be set + identically in all routers attached to the OSPF + backbone and/or any regular OSPF area. (i.e., + OSPF stub areas and NSSAs are excluded)." + DEFVAL { -1 } + ::= { ospfGeneralGroup 11 } + + ospfMulticastExtensions OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A Bit Mask indicating whether the router is + forwarding IP multicast (Class D) datagrams + based on the algorithms defined in the Multi- + cast Extensions to OSPF. + + Bit 0, if set, indicates that the router can + forward IP multicast datagrams in the router's + directly attached areas (called intra-area mul- + ticast routing). + + Bit 1, if set, indicates that the router can + forward IP multicast datagrams between OSPF + areas (called inter-area multicast routing). + + Bit 2, if set, indicates that the router can + forward IP multicast datagrams between Auto- + nomous Systems (called inter-AS multicast rout- + ing). + + Only certain combinations of bit settings are + allowed, namely: 0 (no multicast forwarding is + enabled), 1 (intra-area multicasting only), 3 + (intra-area and inter-area multicasting), 5 + (intra-area and inter-AS multicasting) and 7 + (multicasting everywhere). By default, no mul- + ticast forwarding is enabled." + DEFVAL { 0 } + ::= { ospfGeneralGroup 12 } + + ospfExitOverflowInterval OBJECT-TYPE + SYNTAX PositiveInteger + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The number of seconds that, after entering + OverflowState, a router will attempt to leave + OverflowState. This allows the router to again + originate non-default AS-external-LSAs. When + set to 0, the router will not leave Overflow- + State until restarted." + DEFVAL { 0 } + ::= { ospfGeneralGroup 13 } + + + ospfDemandExtensions OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The router's support for demand routing." + REFERENCE + "OSPF Version 2, Appendix on Demand Routing" + ::= { ospfGeneralGroup 14 } + + +-- The OSPF Area Data Structure contains information +-- regarding the various areas. The interfaces and +-- virtual links are configured as part of these areas. +-- Area 0.0.0.0, by definition, is the Backbone Area + + + ospfAreaTable OBJECT-TYPE + SYNTAX SEQUENCE OF OspfAreaEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information describing the configured parame- + ters and cumulative statistics of the router's + attached areas." + REFERENCE + "OSPF Version 2, Section 6 The Area Data Struc- + ture" + ::= { ospf 2 } + + + ospfAreaEntry OBJECT-TYPE + SYNTAX OspfAreaEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information describing the configured parame- + ters and cumulative statistics of one of the + router's attached areas." + INDEX { ospfAreaId } + ::= { ospfAreaTable 1 } + +OspfAreaEntry ::= + SEQUENCE { + ospfAreaId + AreaID, + ospfAuthType + Integer32, + ospfImportAsExtern + INTEGER, + ospfSpfRuns + Counter32, + ospfAreaBdrRtrCount + Gauge32, + ospfAsBdrRtrCount + Gauge32, + ospfAreaLsaCount + Gauge32, + ospfAreaLsaCksumSum + Integer32, + ospfAreaSummary + INTEGER, + ospfAreaStatus + RowStatus + } + + ospfAreaId OBJECT-TYPE + SYNTAX AreaID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A 32-bit integer uniquely identifying an area. + Area ID 0.0.0.0 is used for the OSPF backbone." + REFERENCE + "OSPF Version 2, Appendix C.2 Area parameters" + ::= { ospfAreaEntry 1 } + + + ospfAuthType OBJECT-TYPE + SYNTAX Integer32 + -- none (0), + -- simplePassword (1) + -- md5 (2) + -- reserved for specification by IANA (> 2) + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "The authentication type specified for an area. + Additional authentication types may be assigned + locally on a per Area basis." + REFERENCE + "OSPF Version 2, Appendix E Authentication" + DEFVAL { 0 } -- no authentication, by default + ::= { ospfAreaEntry 2 } + + ospfImportAsExtern OBJECT-TYPE + SYNTAX INTEGER { + importExternal (1), + importNoExternal (2), + importNssa (3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The area's support for importing AS external + link- state advertisements." + REFERENCE + "OSPF Version 2, Appendix C.2 Area parameters" + DEFVAL { importExternal } + ::= { ospfAreaEntry 3 } + + + ospfSpfRuns OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times that the intra-area route + table has been calculated using this area's + link-state database. This is typically done + using Dijkstra's algorithm." + ::= { ospfAreaEntry 4 } + + + ospfAreaBdrRtrCount OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of area border routers reach- + able within this area. This is initially zero, + and is calculated in each SPF Pass." + ::= { ospfAreaEntry 5 } + + ospfAsBdrRtrCount OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of Autonomous System border + routers reachable within this area. This is + initially zero, and is calculated in each SPF + Pass." + ::= { ospfAreaEntry 6 } + + + ospfAreaLsaCount OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of link-state advertisements + in this area's link-state database, excluding + AS External LSA's." + ::= { ospfAreaEntry 7 } + + + ospfAreaLsaCksumSum OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The 32-bit unsigned sum of the link-state ad- + vertisements' LS checksums contained in this + area's link-state database. This sum excludes + external (LS type 5) link-state advertisements. + The sum can be used to determine if there has + been a change in a router's link state data- + base, and to compare the link-state database of + two routers." + DEFVAL { 0 } + ::= { ospfAreaEntry 8 } + + ospfAreaSummary OBJECT-TYPE + SYNTAX INTEGER { + noAreaSummary (1), + sendAreaSummary (2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The variable ospfAreaSummary controls the im- + port of summary LSAs into stub areas. It has + no effect on other areas. + + If it is noAreaSummary, the router will neither + originate nor propagate summary LSAs into the + stub area. It will rely entirely on its de- + fault route. + + If it is sendAreaSummary, the router will both + summarize and propagate summary LSAs." + DEFVAL { noAreaSummary } + ::= { ospfAreaEntry 9 } + + + ospfAreaStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This variable displays the status of the en- + try. Setting it to 'invalid' has the effect of + rendering it inoperative. The internal effect + (row removal) is implementation dependent." + ::= { ospfAreaEntry 10 } + + +-- OSPF Area Default Metric Table + +-- The OSPF Area Default Metric Table describes the metrics +-- that a default Area Border Router will advertise into a +-- Stub area. + + + ospfStubAreaTable OBJECT-TYPE + SYNTAX SEQUENCE OF OspfStubAreaEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The set of metrics that will be advertised by + a default Area Border Router into a stub area." + REFERENCE + "OSPF Version 2, Appendix C.2, Area Parameters" + ::= { ospf 3 } + + + ospfStubAreaEntry OBJECT-TYPE + SYNTAX OspfStubAreaEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The metric for a given Type of Service that + will be advertised by a default Area Border + Router into a stub area." + REFERENCE + "OSPF Version 2, Appendix C.2, Area Parameters" + INDEX { ospfStubAreaId, ospfStubTOS } + ::= { ospfStubAreaTable 1 } + +OspfStubAreaEntry ::= + SEQUENCE { + ospfStubAreaId + AreaID, + ospfStubTOS + TOSType, + ospfStubMetric + BigMetric, + ospfStubStatus + RowStatus, + ospfStubMetricType + INTEGER + } + + ospfStubAreaId OBJECT-TYPE + SYNTAX AreaID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The 32 bit identifier for the Stub Area. On + creation, this can be derived from the in- + stance." + ::= { ospfStubAreaEntry 1 } + + + ospfStubTOS OBJECT-TYPE + SYNTAX TOSType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Type of Service associated with the + metric. On creation, this can be derived from + the instance." + ::= { ospfStubAreaEntry 2 } + + + ospfStubMetric OBJECT-TYPE + SYNTAX BigMetric + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The metric value applied at the indicated type + of service. By default, this equals the least + metric at the type of service among the inter- + faces to other areas." + ::= { ospfStubAreaEntry 3 } + + + ospfStubStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This variable displays the status of the en- + try. Setting it to 'invalid' has the effect of + rendering it inoperative. The internal effect + (row removal) is implementation dependent." + ::= { ospfStubAreaEntry 4 } + + ospfStubMetricType OBJECT-TYPE + SYNTAX INTEGER { + ospfMetric (1), -- OSPF Metric + comparableCost (2), -- external type 1 + nonComparable (3) -- external type 2 + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This variable displays the type of metric ad- + vertised as a default route." + DEFVAL { ospfMetric } + ::= { ospfStubAreaEntry 5 } + +-- OSPF Link State Database + +-- The Link State Database contains the Link State +-- Advertisements from throughout the areas that the +-- device is attached to. + + + ospfLsdbTable OBJECT-TYPE + SYNTAX SEQUENCE OF OspfLsdbEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The OSPF Process's Link State Database." + REFERENCE + "OSPF Version 2, Section 12 Link State Adver- + tisements" + ::= { ospf 4 } + + + ospfLsdbEntry OBJECT-TYPE + SYNTAX OspfLsdbEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A single Link State Advertisement." + INDEX { ospfLsdbAreaId, ospfLsdbType, + ospfLsdbLsid, ospfLsdbRouterId } + ::= { ospfLsdbTable 1 } + +OspfLsdbEntry ::= + SEQUENCE { + ospfLsdbAreaId + AreaID, + ospfLsdbType + INTEGER, + ospfLsdbLsid + IpAddress, + ospfLsdbRouterId + RouterID, + ospfLsdbSequence + Integer32, + ospfLsdbAge + Integer32, + ospfLsdbChecksum + Integer32, + ospfLsdbAdvertisement + OCTET STRING + } + ospfLsdbAreaId OBJECT-TYPE + SYNTAX AreaID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The 32 bit identifier of the Area from which + the LSA was received." + REFERENCE + "OSPF Version 2, Appendix C.2 Area parameters" + ::= { ospfLsdbEntry 1 } + +-- External Link State Advertisements are permitted +-- for backward compatibility, but should be displayed in +-- the ospfExtLsdbTable rather than here. + + ospfLsdbType OBJECT-TYPE + SYNTAX INTEGER { + routerLink (1), + networkLink (2), + summaryLink (3), + asSummaryLink (4), + asExternalLink (5), -- but see ospfExtLsdbTable + multicastLink (6), + nssaExternalLink (7) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of the link state advertisement. + Each link state type has a separate advertise- + ment format." + REFERENCE + "OSPF Version 2, Appendix A.4.1 The Link State + Advertisement header" + ::= { ospfLsdbEntry 2 } + + ospfLsdbLsid OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Link State ID is an LS Type Specific field + containing either a Router ID or an IP Address; + it identifies the piece of the routing domain + that is being described by the advertisement." + REFERENCE + "OSPF Version 2, Section 12.1.4 Link State ID" + ::= { ospfLsdbEntry 3 } + ospfLsdbRouterId OBJECT-TYPE + SYNTAX RouterID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The 32 bit number that uniquely identifies the + originating router in the Autonomous System." + REFERENCE + "OSPF Version 2, Appendix C.1 Global parameters" + ::= { ospfLsdbEntry 4 } + +-- Note that the OSPF Sequence Number is a 32 bit signed +-- integer. It starts with the value '80000001'h, +-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h +-- Thus, a typical sequence number will be very negative. + + ospfLsdbSequence OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sequence number field is a signed 32-bit + integer. It is used to detect old and dupli- + cate link state advertisements. The space of + sequence numbers is linearly ordered. The + larger the sequence number the more recent the + advertisement." + REFERENCE + "OSPF Version 2, Section 12.1.6 LS sequence + number" + ::= { ospfLsdbEntry 5 } + + + ospfLsdbAge OBJECT-TYPE + SYNTAX Integer32 -- Should be 0..MaxAge + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This field is the age of the link state adver- + tisement in seconds." + REFERENCE + "OSPF Version 2, Section 12.1.1 LS age" + ::= { ospfLsdbEntry 6 } + + ospfLsdbChecksum OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This field is the checksum of the complete + contents of the advertisement, excepting the + age field. The age field is excepted so that + an advertisement's age can be incremented + without updating the checksum. The checksum + used is the same that is used for ISO connec- + tionless datagrams; it is commonly referred to + as the Fletcher checksum." + REFERENCE + "OSPF Version 2, Section 12.1.7 LS checksum" + ::= { ospfLsdbEntry 7 } + + + ospfLsdbAdvertisement OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1..65535)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The entire Link State Advertisement, including + its header." + REFERENCE + "OSPF Version 2, Section 12 Link State Adver- + tisements" + ::= { ospfLsdbEntry 8 } + + +-- Address Range Table + +-- The Address Range Table acts as an adjunct to the Area +-- Table; It describes those Address Range Summaries that +-- are configured to be propagated from an Area to reduce +-- the amount of information about it which is known beyond +-- its borders. + + ospfAreaRangeTable OBJECT-TYPE + SYNTAX SEQUENCE OF OspfAreaRangeEntry + MAX-ACCESS not-accessible + STATUS obsolete + DESCRIPTION + "A range if IP addresses specified by an IP + address/IP network mask pair. For example, + class B address range of X.X.X.X with a network + mask of 255.255.0.0 includes all IP addresses + from X.X.0.0 to X.X.255.255" + REFERENCE + "OSPF Version 2, Appendix C.2 Area parameters" + ::= { ospf 5 } + ospfAreaRangeEntry OBJECT-TYPE + SYNTAX OspfAreaRangeEntry + MAX-ACCESS not-accessible + STATUS obsolete + DESCRIPTION + "A range if IP addresses specified by an IP + address/IP network mask pair. For example, + class B address range of X.X.X.X with a network + mask of 255.255.0.0 includes all IP addresses + from X.X.0.0 to X.X.255.255" + REFERENCE + "OSPF Version 2, Appendix C.2 Area parameters" + INDEX { ospfAreaRangeAreaId, ospfAreaRangeNet } + ::= { ospfAreaRangeTable 1 } + +OspfAreaRangeEntry ::= + SEQUENCE { + ospfAreaRangeAreaId + AreaID, + ospfAreaRangeNet + IpAddress, + ospfAreaRangeMask + IpAddress, + ospfAreaRangeStatus + RowStatus, + ospfAreaRangeEffect + INTEGER + } + + ospfAreaRangeAreaId OBJECT-TYPE + SYNTAX AreaID + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + "The Area the Address Range is to be found + within." + REFERENCE + "OSPF Version 2, Appendix C.2 Area parameters" + ::= { ospfAreaRangeEntry 1 } + + + ospfAreaRangeNet OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + "The IP Address of the Net or Subnet indicated + by the range." + REFERENCE + "OSPF Version 2, Appendix C.2 Area parameters" + ::= { ospfAreaRangeEntry 2 } + + + ospfAreaRangeMask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "The Subnet Mask that pertains to the Net or + Subnet." + REFERENCE + "OSPF Version 2, Appendix C.2 Area parameters" + ::= { ospfAreaRangeEntry 3 } + + ospfAreaRangeStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "This variable displays the status of the en- + try. Setting it to 'invalid' has the effect of + rendering it inoperative. The internal effect + (row removal) is implementation dependent." + ::= { ospfAreaRangeEntry 4 } + + + ospfAreaRangeEffect OBJECT-TYPE + SYNTAX INTEGER { + advertiseMatching (1), + doNotAdvertiseMatching (2) + } + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "Subnets subsumed by ranges either trigger the + advertisement of the indicated summary (adver- + tiseMatching), or result in the subnet's not + being advertised at all outside the area." + DEFVAL { advertiseMatching } + ::= { ospfAreaRangeEntry 5 } + + + +-- OSPF Host Table + +-- The Host/Metric Table indicates what hosts are directly +-- attached to the Router, and what metrics and types of +-- service should be advertised for them. + + ospfHostTable OBJECT-TYPE + SYNTAX SEQUENCE OF OspfHostEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The list of Hosts, and their metrics, that the + router will advertise as host routes." + REFERENCE + "OSPF Version 2, Appendix C.6 Host route param- + eters" + ::= { ospf 6 } + + + ospfHostEntry OBJECT-TYPE + SYNTAX OspfHostEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A metric to be advertised, for a given type of + service, when a given host is reachable." + INDEX { ospfHostIpAddress, ospfHostTOS } + ::= { ospfHostTable 1 } + +OspfHostEntry ::= + SEQUENCE { + ospfHostIpAddress + IpAddress, + ospfHostTOS + TOSType, + ospfHostMetric + Metric, + ospfHostStatus + RowStatus, + ospfHostAreaID + AreaID + } + + ospfHostIpAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP Address of the Host." + REFERENCE + "OSPF Version 2, Appendix C.6 Host route parame- + ters" + ::= { ospfHostEntry 1 } + + + ospfHostTOS OBJECT-TYPE + SYNTAX TOSType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Type of Service of the route being config- + ured." + REFERENCE + "OSPF Version 2, Appendix C.6 Host route parame- + ters" + ::= { ospfHostEntry 2 } + + + ospfHostMetric OBJECT-TYPE + SYNTAX Metric + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The Metric to be advertised." + REFERENCE + "OSPF Version 2, Appendix C.6 Host route parame- + ters" + ::= { ospfHostEntry 3 } + + ospfHostStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This variable displays the status of the en- + try. Setting it to 'invalid' has the effect of + rendering it inoperative. The internal effect + (row removal) is implementation dependent." + ::= { ospfHostEntry 4 } + + + ospfHostAreaID OBJECT-TYPE + SYNTAX AreaID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Area the Host Entry is to be found within. + By default, the area that a subsuming OSPF in- + terface is in, or 0.0.0.0" + REFERENCE + "OSPF Version 2, Appendix C.2 Area parameters" + ::= { ospfHostEntry 5 } + + +-- OSPF Interface Table + +-- The OSPF Interface Table augments the ipAddrTable +-- with OSPF specific information. + + ospfIfTable OBJECT-TYPE + SYNTAX SEQUENCE OF OspfIfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The OSPF Interface Table describes the inter- + faces from the viewpoint of OSPF." + REFERENCE + "OSPF Version 2, Appendix C.3 Router interface + parameters" + ::= { ospf 7 } + + + ospfIfEntry OBJECT-TYPE + SYNTAX OspfIfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The OSPF Interface Entry describes one inter- + face from the viewpoint of OSPF." + INDEX { ospfIfIpAddress, ospfAddressLessIf } + ::= { ospfIfTable 1 } + +OspfIfEntry ::= + SEQUENCE { + ospfIfIpAddress + IpAddress, + ospfAddressLessIf + Integer32, + ospfIfAreaId + AreaID, + ospfIfType + INTEGER, + ospfIfAdminStat + Status, + ospfIfRtrPriority + DesignatedRouterPriority, + ospfIfTransitDelay + UpToMaxAge, + ospfIfRetransInterval + UpToMaxAge, + ospfIfHelloInterval + HelloRange, + ospfIfRtrDeadInterval + PositiveInteger, + ospfIfPollInterval + PositiveInteger, + ospfIfState + INTEGER, + ospfIfDesignatedRouter + IpAddress, + ospfIfBackupDesignatedRouter + IpAddress, + ospfIfEvents + Counter32, + ospfIfAuthType + INTEGER, + ospfIfAuthKey + OCTET STRING, + ospfIfStatus + RowStatus, + ospfIfMulticastForwarding + INTEGER, + ospfIfDemand + TruthValue + } + + ospfIfIpAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP address of this OSPF interface." + ::= { ospfIfEntry 1 } + + ospfAddressLessIf OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "For the purpose of easing the instancing of + addressed and addressless interfaces; This + variable takes the value 0 on interfaces with + IP Addresses, and the corresponding value of + ifIndex for interfaces having no IP Address." + ::= { ospfIfEntry 2 } + ospfIfAreaId OBJECT-TYPE + SYNTAX AreaID + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A 32-bit integer uniquely identifying the area + to which the interface connects. Area ID + 0.0.0.0 is used for the OSPF backbone." + DEFVAL { '00000000'H } -- 0.0.0.0 + ::= { ospfIfEntry 3 } + + ospfIfType OBJECT-TYPE + SYNTAX INTEGER { + broadcast (1), + nbma (2), + pointToPoint (3), + pointToMultipoint (5) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The OSPF interface type. + + By way of a default, this field may be intuited + from the corresponding value of ifType. Broad- + cast LANs, such as Ethernet and IEEE 802.5, + take the value 'broadcast', X.25 and similar + technologies take the value 'nbma', and links + that are definitively point to point take the + value 'pointToPoint'." + ::= { ospfIfEntry 4 } + + + ospfIfAdminStat OBJECT-TYPE + SYNTAX Status + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The OSPF interface's administrative status. + The value formed on the interface, and the in- + terface will be advertised as an internal route + to some area. The value 'disabled' denotes + that the interface is external to OSPF." + DEFVAL { enabled } + ::= { ospfIfEntry 5 } + + ospfIfRtrPriority OBJECT-TYPE + SYNTAX DesignatedRouterPriority + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The priority of this interface. Used in + multi-access networks, this field is used in + the designated router election algorithm. The + value 0 signifies that the router is not eligi- + ble to become the designated router on this + particular network. In the event of a tie in + this value, routers will use their Router ID as + a tie breaker." + DEFVAL { 1 } + ::= { ospfIfEntry 6 } + + + ospfIfTransitDelay OBJECT-TYPE + SYNTAX UpToMaxAge + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The estimated number of seconds it takes to + transmit a link state update packet over this + interface." + DEFVAL { 1 } + ::= { ospfIfEntry 7 } + + + ospfIfRetransInterval OBJECT-TYPE + SYNTAX UpToMaxAge + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The number of seconds between link-state ad- + vertisement retransmissions, for adjacencies + belonging to this interface. This value is + also used when retransmitting database descrip- + tion and link-state request packets." + DEFVAL { 5 } + ::= { ospfIfEntry 8 } + + + ospfIfHelloInterval OBJECT-TYPE + SYNTAX HelloRange + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The length of time, in seconds, between the + Hello packets that the router sends on the in- + terface. This value must be the same for all + routers attached to a common network." + DEFVAL { 10 } + ::= { ospfIfEntry 9 } + + + ospfIfRtrDeadInterval OBJECT-TYPE + SYNTAX PositiveInteger + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The number of seconds that a router's Hello + packets have not been seen before it's neigh- + bors declare the router down. This should be + some multiple of the Hello interval. This + value must be the same for all routers attached + to a common network." + DEFVAL { 40 } + ::= { ospfIfEntry 10 } + + + ospfIfPollInterval OBJECT-TYPE + SYNTAX PositiveInteger + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The larger time interval, in seconds, between + the Hello packets sent to an inactive non- + broadcast multi- access neighbor." + DEFVAL { 120 } + ::= { ospfIfEntry 11 } + + + ospfIfState OBJECT-TYPE + SYNTAX INTEGER { + down (1), + loopback (2), + waiting (3), + pointToPoint (4), + designatedRouter (5), + backupDesignatedRouter (6), + otherDesignatedRouter (7) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The OSPF Interface State." + DEFVAL { down } + ::= { ospfIfEntry 12 } + + + ospfIfDesignatedRouter OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP Address of the Designated Router." + DEFVAL { '00000000'H } -- 0.0.0.0 + ::= { ospfIfEntry 13 } + + + ospfIfBackupDesignatedRouter OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP Address of the Backup Designated + Router." + DEFVAL { '00000000'H } -- 0.0.0.0 + ::= { ospfIfEntry 14 } + + ospfIfEvents OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times this OSPF interface has + changed its state, or an error has occurred." + ::= { ospfIfEntry 15 } + + + ospfIfAuthKey OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..256)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The Authentication Key. If the Area's Author- + ization Type is simplePassword, and the key + length is shorter than 8 octets, the agent will + left adjust and zero fill to 8 octets. + + Note that unauthenticated interfaces need no + authentication key, and simple password authen- + tication cannot use a key of more than 8 oc- + tets. Larger keys are useful only with authen- + tication mechanisms not specified in this docu- + ment. + + When read, ospfIfAuthKey always returns an Oc- + tet String of length zero." + REFERENCE + "OSPF Version 2, Section 9 The Interface Data + Structure" + DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0 + ::= { ospfIfEntry 16 } + + ospfIfStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This variable displays the status of the en- + try. Setting it to 'invalid' has the effect of + rendering it inoperative. The internal effect + (row removal) is implementation dependent." + ::= { ospfIfEntry 17 } + + + ospfIfMulticastForwarding OBJECT-TYPE + SYNTAX INTEGER { + blocked (1), -- no multicast forwarding + multicast (2), -- using multicast address + unicast (3) -- to each OSPF neighbor + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The way multicasts should forwarded on this + interface; not forwarded, forwarded as data + link multicasts, or forwarded as data link uni- + casts. Data link multicasting is not meaning- + ful on point to point and NBMA interfaces, and + setting ospfMulticastForwarding to 0 effective- + ly disables all multicast forwarding." + DEFVAL { blocked } + ::= { ospfIfEntry 18 } + + + ospfIfDemand OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Indicates whether Demand OSPF procedures (hel- + lo supression to FULL neighbors and setting the + DoNotAge flag on proogated LSAs) should be per- + formed on this interface." + DEFVAL { false } + ::= { ospfIfEntry 19 } + + + ospfIfAuthType OBJECT-TYPE + SYNTAX INTEGER (0..255) + -- none (0), + -- simplePassword (1) + -- md5 (2) + -- reserved for specification by IANA (> 2) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The authentication type specified for an in- + terface. Additional authentication types may + be assigned locally." + REFERENCE + "OSPF Version 2, Appendix E Authentication" + DEFVAL { 0 } -- no authentication, by default + ::= { ospfIfEntry 20 } + + +-- OSPF Interface Metric Table + +-- The Metric Table describes the metrics to be advertised +-- for a specified interface at the various types of service. +-- As such, this table is an adjunct of the OSPF Interface +-- Table. + +-- Types of service, as defined by RFC 791, have the ability +-- to request low delay, high bandwidth, or reliable linkage. + +-- For the purposes of this specification, the measure of +-- bandwidth + +-- Metric = 10^8 / ifSpeed + +-- is the default value. For multiple link interfaces, note +-- that ifSpeed is the sum of the individual link speeds. +-- This yields a number having the following typical values: + +-- Network Type/bit rate Metric + +-- >= 100 MBPS 1 +-- Ethernet/802.3 10 +-- E1 48 +-- T1 (ESF) 65 +-- 64 KBPS 1562 +-- 56 KBPS 1785 +-- 19.2 KBPS 5208 +-- 9.6 KBPS 10416 + +-- Routes that are not specified use the default (TOS 0) metric + + ospfIfMetricTable OBJECT-TYPE + SYNTAX SEQUENCE OF OspfIfMetricEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The TOS metrics for a non-virtual interface + identified by the interface index." + REFERENCE + "OSPF Version 2, Appendix C.3 Router interface + parameters" + ::= { ospf 8 } + + ospfIfMetricEntry OBJECT-TYPE + SYNTAX OspfIfMetricEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A particular TOS metric for a non-virtual in- + terface identified by the interface index." + REFERENCE + "OSPF Version 2, Appendix C.3 Router interface + parameters" + INDEX { ospfIfMetricIpAddress, + ospfIfMetricAddressLessIf, + ospfIfMetricTOS } + ::= { ospfIfMetricTable 1 } + +OspfIfMetricEntry ::= + SEQUENCE { + ospfIfMetricIpAddress + IpAddress, + ospfIfMetricAddressLessIf + Integer32, + ospfIfMetricTOS + TOSType, + ospfIfMetricValue + Metric, + ospfIfMetricStatus + RowStatus + } + + ospfIfMetricIpAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP address of this OSPF interface. On row + creation, this can be derived from the in- + stance." + ::= { ospfIfMetricEntry 1 } + + ospfIfMetricAddressLessIf OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "For the purpose of easing the instancing of + addressed and addressless interfaces; This + variable takes the value 0 on interfaces with + IP Addresses, and the value of ifIndex for in- + terfaces having no IP Address. On row crea- + tion, this can be derived from the instance." + ::= { ospfIfMetricEntry 2 } + + + ospfIfMetricTOS OBJECT-TYPE + SYNTAX TOSType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of service metric being referenced. + On row creation, this can be derived from the + instance." + ::= { ospfIfMetricEntry 3 } + + + ospfIfMetricValue OBJECT-TYPE + SYNTAX Metric + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The metric of using this type of service on + this interface. The default value of the TOS 0 + Metric is 10^8 / ifSpeed." + ::= { ospfIfMetricEntry 4 } + + ospfIfMetricStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This variable displays the status of the en- + try. Setting it to 'invalid' has the effect of + rendering it inoperative. The internal effect + (row removal) is implementation dependent." + ::= { ospfIfMetricEntry 5 } + + +-- OSPF Virtual Interface Table + +-- The Virtual Interface Table describes the virtual +-- links that the OSPF Process is configured to +-- carry on. + + ospfVirtIfTable OBJECT-TYPE + SYNTAX SEQUENCE OF OspfVirtIfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about this router's virtual inter- + faces." + REFERENCE + "OSPF Version 2, Appendix C.4 Virtual link + parameters" + ::= { ospf 9 } + + + ospfVirtIfEntry OBJECT-TYPE + SYNTAX OspfVirtIfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a single Virtual Interface." + INDEX { ospfVirtIfAreaId, ospfVirtIfNeighbor } + ::= { ospfVirtIfTable 1 } + +OspfVirtIfEntry ::= + SEQUENCE { + ospfVirtIfAreaId + AreaID, + ospfVirtIfNeighbor + RouterID, + ospfVirtIfTransitDelay + UpToMaxAge, + ospfVirtIfRetransInterval + UpToMaxAge, + ospfVirtIfHelloInterval + HelloRange, + ospfVirtIfRtrDeadInterval + PositiveInteger, + ospfVirtIfState + INTEGER, + ospfVirtIfEvents + Counter32, + ospfVirtIfAuthType + INTEGER, + ospfVirtIfAuthKey + OCTET STRING, + ospfVirtIfStatus + RowStatus + } + + ospfVirtIfAreaId OBJECT-TYPE + SYNTAX AreaID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Transit Area that the Virtual Link + traverses. By definition, this is not 0.0.0.0" + ::= { ospfVirtIfEntry 1 } + + + ospfVirtIfNeighbor OBJECT-TYPE + SYNTAX RouterID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Router ID of the Virtual Neighbor." + ::= { ospfVirtIfEntry 2 } + + + ospfVirtIfTransitDelay OBJECT-TYPE + SYNTAX UpToMaxAge + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The estimated number of seconds it takes to + transmit a link- state update packet over this + interface." + DEFVAL { 1 } + ::= { ospfVirtIfEntry 3 } + + + ospfVirtIfRetransInterval OBJECT-TYPE + SYNTAX UpToMaxAge + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The number of seconds between link-state ad- + vertisement retransmissions, for adjacencies + belonging to this interface. This value is + also used when retransmitting database descrip- + tion and link-state request packets. This + value should be well over the expected round- + trip time." + DEFVAL { 5 } + ::= { ospfVirtIfEntry 4 } + + + ospfVirtIfHelloInterval OBJECT-TYPE + SYNTAX HelloRange + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The length of time, in seconds, between the + Hello packets that the router sends on the in- + terface. This value must be the same for the + virtual neighbor." + DEFVAL { 10 } + ::= { ospfVirtIfEntry 5 } + + + ospfVirtIfRtrDeadInterval OBJECT-TYPE + SYNTAX PositiveInteger + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The number of seconds that a router's Hello + packets have not been seen before it's neigh- + bors declare the router down. This should be + some multiple of the Hello interval. This + value must be the same for the virtual neigh- + bor." + DEFVAL { 60 } + ::= { ospfVirtIfEntry 6 } + + + ospfVirtIfState OBJECT-TYPE + SYNTAX INTEGER { + down (1), -- these use the same encoding + pointToPoint (4) -- as the ospfIfTable + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "OSPF virtual interface states." + DEFVAL { down } + ::= { ospfVirtIfEntry 7 } + + + ospfVirtIfEvents OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of state changes or error events on + this Virtual Link" + ::= { ospfVirtIfEntry 8 } + + + ospfVirtIfAuthKey OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..256)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "If Authentication Type is simplePassword, the + device will left adjust and zero fill to 8 oc- + tets. + + Note that unauthenticated interfaces need no + authentication key, and simple password authen- + tication cannot use a key of more than 8 oc- + tets. Larger keys are useful only with authen- + tication mechanisms not specified in this docu- + ment. + + When read, ospfVifAuthKey always returns a + string of length zero." + REFERENCE + "OSPF Version 2, Section 9 The Interface Data + Structure" + DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0 + ::= { ospfVirtIfEntry 9 } + + + ospfVirtIfStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This variable displays the status of the en- + try. Setting it to 'invalid' has the effect of + rendering it inoperative. The internal effect + (row removal) is implementation dependent." + ::= { ospfVirtIfEntry 10 } + + + ospfVirtIfAuthType OBJECT-TYPE + SYNTAX INTEGER (0..255) + -- none (0), + -- simplePassword (1) + -- md5 (2) + -- reserved for specification by IANA (> 2) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The authentication type specified for a virtu- + al interface. Additional authentication types + may be assigned locally." + REFERENCE + "OSPF Version 2, Appendix E Authentication" + DEFVAL { 0 } -- no authentication, by default + ::= { ospfVirtIfEntry 11 } + + +-- OSPF Neighbor Table + +-- The OSPF Neighbor Table describes all neighbors in +-- the locality of the subject router. + + ospfNbrTable OBJECT-TYPE + SYNTAX SEQUENCE OF OspfNbrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of non-virtual neighbor information." + REFERENCE + "OSPF Version 2, Section 10 The Neighbor Data + Structure" + ::= { ospf 10 } + + + ospfNbrEntry OBJECT-TYPE + SYNTAX OspfNbrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The information regarding a single neighbor." + REFERENCE + "OSPF Version 2, Section 10 The Neighbor Data + Structure" + INDEX { ospfNbrIpAddr, ospfNbrAddressLessIndex } + ::= { ospfNbrTable 1 } + +OspfNbrEntry ::= + SEQUENCE { + ospfNbrIpAddr + IpAddress, + ospfNbrAddressLessIndex + InterfaceIndex, + ospfNbrRtrId + RouterID, + ospfNbrOptions + Integer32, + ospfNbrPriority + DesignatedRouterPriority, + ospfNbrState + INTEGER, + ospfNbrEvents + Counter32, + ospfNbrLsRetransQLen + Gauge32, + ospfNbmaNbrStatus + RowStatus, + ospfNbmaNbrPermanence + INTEGER, + ospfNbrHelloSuppressed + TruthValue + } + + ospfNbrIpAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP address this neighbor is using in its + IP Source Address. Note that, on addressless + links, this will not be 0.0.0.0, but the ad- + dress of another of the neighbor's interfaces." + ::= { ospfNbrEntry 1 } + + + ospfNbrAddressLessIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "On an interface having an IP Address, zero. + On addressless interfaces, the corresponding + value of ifIndex in the Internet Standard MIB. + On row creation, this can be derived from the + instance." + ::= { ospfNbrEntry 2 } + + + ospfNbrRtrId OBJECT-TYPE + SYNTAX RouterID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A 32-bit integer (represented as a type IpAd- + dress) uniquely identifying the neighboring + router in the Autonomous System." + DEFVAL { '00000000'H } -- 0.0.0.0 + ::= { ospfNbrEntry 3 } + + + ospfNbrOptions OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A Bit Mask corresponding to the neighbor's op- + tions field. + + Bit 0, if set, indicates that the system will + operate on Type of Service metrics other than + TOS 0. If zero, the neighbor will ignore all + metrics except the TOS 0 metric. + + Bit 1, if set, indicates that the associated + area accepts and operates on external informa- + tion; if zero, it is a stub area. + + Bit 2, if set, indicates that the system is ca- + pable of routing IP Multicast datagrams; i.e., + that it implements the Multicast Extensions to + OSPF. + + Bit 3, if set, indicates that the associated + area is an NSSA. These areas are capable of + carrying type 7 external advertisements, which + are translated into type 5 external advertise- + ments at NSSA borders." + REFERENCE + "OSPF Version 2, Section 12.1.2 Options" + DEFVAL { 0 } + ::= { ospfNbrEntry 4 } + + + ospfNbrPriority OBJECT-TYPE + SYNTAX DesignatedRouterPriority + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The priority of this neighbor in the designat- + ed router election algorithm. The value 0 sig- + nifies that the neighbor is not eligible to be- + come the designated router on this particular + network." + DEFVAL { 1 } + ::= { ospfNbrEntry 5 } + + + ospfNbrState OBJECT-TYPE + SYNTAX INTEGER { + down (1), + attempt (2), + init (3), + twoWay (4), + exchangeStart (5), + exchange (6), + loading (7), + full (8) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The State of the relationship with this Neigh- + bor." + REFERENCE + "OSPF Version 2, Section 10.1 Neighbor States" + DEFVAL { down } + ::= { ospfNbrEntry 6 } + + + ospfNbrEvents OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times this neighbor relationship + has changed state, or an error has occurred." + ::= { ospfNbrEntry 7 } + + + ospfNbrLsRetransQLen OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current length of the retransmission + queue." + ::= { ospfNbrEntry 8 } + + + ospfNbmaNbrStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This variable displays the status of the en- + try. Setting it to 'invalid' has the effect of + rendering it inoperative. The internal effect + (row removal) is implementation dependent." + ::= { ospfNbrEntry 9 } + + + ospfNbmaNbrPermanence OBJECT-TYPE + SYNTAX INTEGER { + dynamic (1), -- learned through protocol + permanent (2) -- configured address + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable displays the status of the en- + try. 'dynamic' and 'permanent' refer to how + the neighbor became known." + DEFVAL { permanent } + ::= { ospfNbrEntry 10 } + + + ospfNbrHelloSuppressed OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates whether Hellos are being suppressed + to the neighbor" + ::= { ospfNbrEntry 11 } + + +-- OSPF Virtual Neighbor Table + +-- This table describes all virtual neighbors. +-- Since Virtual Links are configured in the +-- virtual interface table, this table is read-only. + + ospfVirtNbrTable OBJECT-TYPE + SYNTAX SEQUENCE OF OspfVirtNbrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of virtual neighbor information." + REFERENCE + "OSPF Version 2, Section 15 Virtual Links" + ::= { ospf 11 } + + + ospfVirtNbrEntry OBJECT-TYPE + SYNTAX OspfVirtNbrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Virtual neighbor information." + INDEX { ospfVirtNbrArea, ospfVirtNbrRtrId } + ::= { ospfVirtNbrTable 1 } + +OspfVirtNbrEntry ::= + SEQUENCE { + ospfVirtNbrArea + AreaID, + ospfVirtNbrRtrId + RouterID, + ospfVirtNbrIpAddr + IpAddress, + ospfVirtNbrOptions + Integer32, + ospfVirtNbrState + INTEGER, + ospfVirtNbrEvents + Counter32, + ospfVirtNbrLsRetransQLen + Gauge32, + ospfVirtNbrHelloSuppressed + TruthValue + } + + ospfVirtNbrArea OBJECT-TYPE + SYNTAX AreaID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Transit Area Identifier." + ::= { ospfVirtNbrEntry 1 } + + + ospfVirtNbrRtrId OBJECT-TYPE + SYNTAX RouterID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A 32-bit integer uniquely identifying the + neighboring router in the Autonomous System." + ::= { ospfVirtNbrEntry 2 } + + + ospfVirtNbrIpAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP address this Virtual Neighbor is us- + ing." + ::= { ospfVirtNbrEntry 3 } + + + ospfVirtNbrOptions OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A Bit Mask corresponding to the neighbor's op- + tions field. + + Bit 1, if set, indicates that the system will + operate on Type of Service metrics other than + TOS 0. If zero, the neighbor will ignore all + metrics except the TOS 0 metric. + + Bit 2, if set, indicates that the system is + Network Multicast capable; ie, that it imple- + ments OSPF Multicast Routing." + ::= { ospfVirtNbrEntry 4 } + ospfVirtNbrState OBJECT-TYPE + SYNTAX INTEGER { + down (1), + attempt (2), + init (3), + twoWay (4), + exchangeStart (5), + exchange (6), + loading (7), + full (8) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The state of the Virtual Neighbor Relation- + ship." + ::= { ospfVirtNbrEntry 5 } + + + ospfVirtNbrEvents OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of times this virtual link has + changed its state, or an error has occurred." + ::= { ospfVirtNbrEntry 6 } + + + ospfVirtNbrLsRetransQLen OBJECT-TYPE + SYNTAX Gauge32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current length of the retransmission + queue." + ::= { ospfVirtNbrEntry 7 } + + + ospfVirtNbrHelloSuppressed OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates whether Hellos are being suppressed + to the neighbor" + ::= { ospfVirtNbrEntry 8 } + +-- OSPF Link State Database, External + +-- The Link State Database contains the Link State +-- Advertisements from throughout the areas that the +-- device is attached to. + +-- This table is identical to the OSPF LSDB Table in +-- format, but contains only External Link State +-- Advertisements. The purpose is to allow external +-- LSAs to be displayed once for the router rather +-- than once in each non-stub area. + + ospfExtLsdbTable OBJECT-TYPE + SYNTAX SEQUENCE OF OspfExtLsdbEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The OSPF Process's Links State Database." + REFERENCE + "OSPF Version 2, Section 12 Link State Adver- + tisements" + ::= { ospf 12 } + + + ospfExtLsdbEntry OBJECT-TYPE + SYNTAX OspfExtLsdbEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A single Link State Advertisement." + INDEX { ospfExtLsdbType, ospfExtLsdbLsid, ospfExtLsdbRouterId } + ::= { ospfExtLsdbTable 1 } + +OspfExtLsdbEntry ::= + SEQUENCE { + ospfExtLsdbType + INTEGER, + ospfExtLsdbLsid + IpAddress, + ospfExtLsdbRouterId + RouterID, + ospfExtLsdbSequence + Integer32, + ospfExtLsdbAge + Integer32, + ospfExtLsdbChecksum + Integer32, + ospfExtLsdbAdvertisement + OCTET STRING + } + + ospfExtLsdbType OBJECT-TYPE + SYNTAX INTEGER { + asExternalLink (5) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of the link state advertisement. + Each link state type has a separate advertise- + ment format." + REFERENCE + "OSPF Version 2, Appendix A.4.1 The Link State + Advertisement header" + ::= { ospfExtLsdbEntry 1 } + + + ospfExtLsdbLsid OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Link State ID is an LS Type Specific field + containing either a Router ID or an IP Address; + it identifies the piece of the routing domain + that is being described by the advertisement." + REFERENCE + "OSPF Version 2, Section 12.1.4 Link State ID" + ::= { ospfExtLsdbEntry 2 } + + + ospfExtLsdbRouterId OBJECT-TYPE + SYNTAX RouterID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The 32 bit number that uniquely identifies the + originating router in the Autonomous System." + REFERENCE + "OSPF Version 2, Appendix C.1 Global parameters" + ::= { ospfExtLsdbEntry 3 } + +-- Note that the OSPF Sequence Number is a 32 bit signed +-- integer. It starts with the value '80000001'h, +-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h +-- Thus, a typical sequence number will be very negative. + ospfExtLsdbSequence OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sequence number field is a signed 32-bit + integer. It is used to detect old and dupli- + cate link state advertisements. The space of + sequence numbers is linearly ordered. The + larger the sequence number the more recent the + advertisement." + REFERENCE + "OSPF Version 2, Section 12.1.6 LS sequence + number" + ::= { ospfExtLsdbEntry 4 } + + + ospfExtLsdbAge OBJECT-TYPE + SYNTAX Integer32 -- Should be 0..MaxAge + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This field is the age of the link state adver- + tisement in seconds." + REFERENCE + "OSPF Version 2, Section 12.1.1 LS age" + ::= { ospfExtLsdbEntry 5 } + + + ospfExtLsdbChecksum OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This field is the checksum of the complete + contents of the advertisement, excepting the + age field. The age field is excepted so that + an advertisement's age can be incremented + without updating the checksum. The checksum + used is the same that is used for ISO connec- + tionless datagrams; it is commonly referred to + as the Fletcher checksum." + REFERENCE + "OSPF Version 2, Section 12.1.7 LS checksum" + ::= { ospfExtLsdbEntry 6 } + + + ospfExtLsdbAdvertisement OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(36)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The entire Link State Advertisement, including + its header." + REFERENCE + "OSPF Version 2, Section 12 Link State Adver- + tisements" + ::= { ospfExtLsdbEntry 7 } + + +-- OSPF Use of the CIDR Route Table + +ospfRouteGroup OBJECT IDENTIFIER ::= { ospf 13 } + +-- The IP Forwarding Table defines a number of objects for use by +-- the routing protocol to externalize its information. Most of +-- the variables (ipForwardDest, ipForwardMask, ipForwardPolicy, +-- ipForwardNextHop, ipForwardIfIndex, ipForwardType, +-- ipForwardProto, ipForwardAge, and ipForwardNextHopAS) are +-- defined there. + +-- Those that leave some discretion are defined here. + +-- ipCidrRouteProto is, of course, ospf (13). + +-- ipCidrRouteAge is the time since the route was first calculated, +-- as opposed to the time since the last SPF run. + +-- ipCidrRouteInfo is an OBJECT IDENTIFIER for use by the routing +-- protocol. The following values shall be found there depending +-- on the way the route was calculated. + +ospfIntraArea OBJECT IDENTIFIER ::= { ospfRouteGroup 1 } +ospfInterArea OBJECT IDENTIFIER ::= { ospfRouteGroup 2 } +ospfExternalType1 OBJECT IDENTIFIER ::= { ospfRouteGroup 3 } +ospfExternalType2 OBJECT IDENTIFIER ::= { ospfRouteGroup 4 } + +-- ipCidrRouteMetric1 is, by definition, the primary routing +-- metric. Therefore, it should be the metric that route +-- selection is based on. For intra-area and inter-area routes, +-- it is an OSPF metric. For External Type 1 (comparable value) +-- routes, it is an OSPF metric plus the External Metric. For +-- external Type 2 (non-comparable value) routes, it is the +-- external metric. + +-- ipCidrRouteMetric2 is, by definition, a secondary routing +-- metric. Therefore, it should be the metric that breaks a tie +-- among routes having equal metric1 values and the same +-- calculation rule. For intra-area, inter-area routes, and +-- External Type 1 (comparable value) routes, it is unused. For +-- external Type 2 (non-comparable value) routes, it is the metric +-- to the AS border router. + +-- ipCidrRouteMetric3, ipCidrRouteMetric4, and ipCidrRouteMetric5 are +-- unused. + +-- +-- The OSPF Area Aggregate Table +-- +-- This table replaces the OSPF Area Summary Table, being an +-- extension of that for CIDR routers. + + ospfAreaAggregateTable OBJECT-TYPE + SYNTAX SEQUENCE OF OspfAreaAggregateEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A range of IP addresses specified by an IP + address/IP network mask pair. For example, + class B address range of X.X.X.X with a network + mask of 255.255.0.0 includes all IP addresses + from X.X.0.0 to X.X.255.255. Note that if + ranges are configured such that one range sub- + sumes another range (e.g., 10.0.0.0 mask + 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the + most specific match is the preferred one." + REFERENCE + "OSPF Version 2, Appendix C.2 Area parameters" + ::= { ospf 14 } + + + ospfAreaAggregateEntry OBJECT-TYPE + SYNTAX OspfAreaAggregateEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A range of IP addresses specified by an IP + address/IP network mask pair. For example, + class B address range of X.X.X.X with a network + mask of 255.255.0.0 includes all IP addresses + from X.X.0.0 to X.X.255.255. Note that if + ranges are range configured such that one range + subsumes another range (e.g., 10.0.0.0 mask + 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the + most specific match is the preferred one." + REFERENCE + "OSPF Version 2, Appendix C.2 Area parameters" + INDEX { ospfAreaAggregateAreaID, ospfAreaAggregateLsdbType, + ospfAreaAggregateNet, ospfAreaAggregateMask } + ::= { ospfAreaAggregateTable 1 } + + +OspfAreaAggregateEntry ::= + SEQUENCE { + ospfAreaAggregateAreaID + AreaID, + ospfAreaAggregateLsdbType + INTEGER, + ospfAreaAggregateNet + IpAddress, + ospfAreaAggregateMask + IpAddress, + ospfAreaAggregateStatus + RowStatus, + ospfAreaAggregateEffect + INTEGER + } + + ospfAreaAggregateAreaID OBJECT-TYPE + SYNTAX AreaID + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Area the Address Aggregate is to be found + within." + REFERENCE + "OSPF Version 2, Appendix C.2 Area parameters" + ::= { ospfAreaAggregateEntry 1 } + + + ospfAreaAggregateLsdbType OBJECT-TYPE + SYNTAX INTEGER { + summaryLink (3), + nssaExternalLink (7) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of the Address Aggregate. This field + specifies the Lsdb type that this Address Ag- + gregate applies to." + REFERENCE + "OSPF Version 2, Appendix A.4.1 The Link State + Advertisement header" + ::= { ospfAreaAggregateEntry 2 } + + + ospfAreaAggregateNet OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The IP Address of the Net or Subnet indicated + by the range." + REFERENCE + "OSPF Version 2, Appendix C.2 Area parameters" + ::= { ospfAreaAggregateEntry 3 } + + + ospfAreaAggregateMask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Subnet Mask that pertains to the Net or + Subnet." + REFERENCE + "OSPF Version 2, Appendix C.2 Area parameters" + ::= { ospfAreaAggregateEntry 4 } + + + ospfAreaAggregateStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This variable displays the status of the en- + try. Setting it to 'invalid' has the effect of + rendering it inoperative. The internal effect + (row removal) is implementation dependent." + ::= { ospfAreaAggregateEntry 5 } + + + ospfAreaAggregateEffect OBJECT-TYPE + SYNTAX INTEGER { + advertiseMatching (1), + doNotAdvertiseMatching (2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Subnets subsumed by ranges either trigger the + advertisement of the indicated aggregate (ad- + vertiseMatching), or result in the subnet's not + being advertised at all outside the area." + DEFVAL { advertiseMatching } + ::= { ospfAreaAggregateEntry 6 } + + +-- conformance information + +ospfConformance OBJECT IDENTIFIER ::= { ospf 15 } + +ospfGroups OBJECT IDENTIFIER ::= { ospfConformance 1 } +ospfCompliances OBJECT IDENTIFIER ::= { ospfConformance 2 } + +-- compliance statements + + ospfCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement " + MODULE -- this module + MANDATORY-GROUPS { + ospfBasicGroup, + ospfAreaGroup, + ospfStubAreaGroup, + ospfIfGroup, + ospfIfMetricGroup, + ospfVirtIfGroup, + ospfNbrGroup, + ospfVirtNbrGroup, + ospfAreaAggregateGroup + } + ::= { ospfCompliances 1 } + + +-- units of conformance + + ospfBasicGroup OBJECT-GROUP + OBJECTS { + ospfRouterId, + ospfAdminStat, + ospfVersionNumber, + ospfAreaBdrRtrStatus, + ospfASBdrRtrStatus, + ospfExternLsaCount, + ospfExternLsaCksumSum, + ospfTOSSupport, + ospfOriginateNewLsas, + ospfRxNewLsas, + ospfExtLsdbLimit, + ospfMulticastExtensions, + ospfExitOverflowInterval, + ospfDemandExtensions + } + STATUS current + DESCRIPTION + "These objects are required for OSPF systems." + ::= { ospfGroups 1 } + + + ospfAreaGroup OBJECT-GROUP + OBJECTS { + ospfAreaId, + ospfImportAsExtern, + ospfSpfRuns, + ospfAreaBdrRtrCount, + ospfAsBdrRtrCount, + ospfAreaLsaCount, + ospfAreaLsaCksumSum, + ospfAreaSummary, + ospfAreaStatus + } + STATUS current + DESCRIPTION + "These objects are required for OSPF systems + supporting areas." + ::= { ospfGroups 2 } + + + ospfStubAreaGroup OBJECT-GROUP + OBJECTS { + ospfStubAreaId, + ospfStubTOS, + ospfStubMetric, + ospfStubStatus, + ospfStubMetricType + } + STATUS current + DESCRIPTION + "These objects are required for OSPF systems + supporting stub areas." + ::= { ospfGroups 3 } + + + ospfLsdbGroup OBJECT-GROUP + OBJECTS { + ospfLsdbAreaId, + ospfLsdbType, + ospfLsdbLsid, + ospfLsdbRouterId, + ospfLsdbSequence, + ospfLsdbAge, + ospfLsdbChecksum, + ospfLsdbAdvertisement + } + STATUS current + DESCRIPTION + "These objects are required for OSPF systems + that display their link state database." + ::= { ospfGroups 4 } + + + ospfAreaRangeGroup OBJECT-GROUP + OBJECTS { + ospfAreaRangeAreaId, + ospfAreaRangeNet, + ospfAreaRangeMask, + ospfAreaRangeStatus, + ospfAreaRangeEffect + } + STATUS obsolete + DESCRIPTION + "These objects are required for non-CIDR OSPF + systems that support multiple areas." + ::= { ospfGroups 5 } + + + ospfHostGroup OBJECT-GROUP + OBJECTS { + ospfHostIpAddress, + ospfHostTOS, + ospfHostMetric, + ospfHostStatus, + ospfHostAreaID + } + STATUS current + DESCRIPTION + "These objects are required for OSPF systems + that support attached hosts." + ::= { ospfGroups 6 } + + + ospfIfGroup OBJECT-GROUP + OBJECTS { + ospfIfIpAddress, + ospfAddressLessIf, + ospfIfAreaId, + ospfIfType, + ospfIfAdminStat, + ospfIfRtrPriority, + ospfIfTransitDelay, + ospfIfRetransInterval, + ospfIfHelloInterval, + ospfIfRtrDeadInterval, + ospfIfPollInterval, + ospfIfState, + ospfIfDesignatedRouter, + ospfIfBackupDesignatedRouter, + ospfIfEvents, + ospfIfAuthType, + ospfIfAuthKey, + ospfIfStatus, + ospfIfMulticastForwarding, + ospfIfDemand + } + STATUS current + DESCRIPTION + "These objects are required for OSPF systems." + ::= { ospfGroups 7 } + + + ospfIfMetricGroup OBJECT-GROUP + OBJECTS { + ospfIfMetricIpAddress, + ospfIfMetricAddressLessIf, + ospfIfMetricTOS, + ospfIfMetricValue, + ospfIfMetricStatus + } + STATUS current + DESCRIPTION + "These objects are required for OSPF systems." + ::= { ospfGroups 8 } + + + ospfVirtIfGroup OBJECT-GROUP + OBJECTS { + ospfVirtIfAreaId, + ospfVirtIfNeighbor, + ospfVirtIfTransitDelay, + ospfVirtIfRetransInterval, + ospfVirtIfHelloInterval, + ospfVirtIfRtrDeadInterval, + ospfVirtIfState, + ospfVirtIfEvents, + ospfVirtIfAuthType, + ospfVirtIfAuthKey, + ospfVirtIfStatus + } + STATUS current + DESCRIPTION + "These objects are required for OSPF systems." + ::= { ospfGroups 9 } + + + ospfNbrGroup OBJECT-GROUP + OBJECTS { + ospfNbrIpAddr, + ospfNbrAddressLessIndex, + ospfNbrRtrId, + ospfNbrOptions, + ospfNbrPriority, + ospfNbrState, + ospfNbrEvents, + ospfNbrLsRetransQLen, + ospfNbmaNbrStatus, + ospfNbmaNbrPermanence, + ospfNbrHelloSuppressed + } + STATUS current + DESCRIPTION + "These objects are required for OSPF systems." + ::= { ospfGroups 10 } + + + ospfVirtNbrGroup OBJECT-GROUP + OBJECTS { + ospfVirtNbrArea, + ospfVirtNbrRtrId, + ospfVirtNbrIpAddr, + ospfVirtNbrOptions, + ospfVirtNbrState, + ospfVirtNbrEvents, + ospfVirtNbrLsRetransQLen, + ospfVirtNbrHelloSuppressed + } + STATUS current + DESCRIPTION + "These objects are required for OSPF systems." + ::= { ospfGroups 11 } + + + ospfExtLsdbGroup OBJECT-GROUP + OBJECTS { + ospfExtLsdbType, + ospfExtLsdbLsid, + ospfExtLsdbRouterId, + ospfExtLsdbSequence, + ospfExtLsdbAge, + ospfExtLsdbChecksum, + ospfExtLsdbAdvertisement + } + STATUS current + DESCRIPTION + "These objects are required for OSPF systems + that display their link state database." + ::= { ospfGroups 12 } + + + ospfAreaAggregateGroup OBJECT-GROUP + OBJECTS { + ospfAreaAggregateAreaID, + ospfAreaAggregateLsdbType, + ospfAreaAggregateNet, + ospfAreaAggregateMask, + ospfAreaAggregateStatus, + ospfAreaAggregateEffect + } + STATUS current + DESCRIPTION + "These objects are required for OSPF systems." + ::= { ospfGroups 13 } + +END |