snmp: T3606: Install MIBs into well known location

FRR also expects the MIBs in /usr/share/snmp/mibs

1 files changed, 738 insertions, 0 deletions

diff --git a/mibs/TUNNEL-MIB.txt b/mibs/TUNNEL-MIB.txt
new file mode 100644
index 000000000..5f9596b58
--- /dev/null
+++ b/mibs/TUNNEL-MIB.txt
@@ -0,0 +1,738 @@
+TUNNEL-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, transmission,
+    Integer32, IpAddress    FROM SNMPv2-SMI          -- [RFC2578]
+
+    RowStatus, StorageType  FROM SNMPv2-TC           -- [RFC2579]
+
+    MODULE-COMPLIANCE,
+    OBJECT-GROUP            FROM SNMPv2-CONF         -- [RFC2580]
+
+    InetAddressType,
+    InetAddress             FROM INET-ADDRESS-MIB    -- [RFC4001]
+
+    IPv6FlowLabelOrAny      FROM IPV6-FLOW-LABEL-MIB -- [RFC3595]
+
+    ifIndex,
+    InterfaceIndexOrZero    FROM IF-MIB              -- [RFC2863]
+
+    IANAtunnelType          FROM IANAifType-MIB;     -- [IFTYPE]
+
+tunnelMIB MODULE-IDENTITY
+    LAST-UPDATED "200505160000Z" -- May 16, 2005
+    ORGANIZATION "IETF IP Version 6 (IPv6) Working Group"
+    CONTACT-INFO
+            " Dave Thaler
+              Microsoft Corporation
+              One Microsoft Way
+              Redmond, WA  98052-6399
+              EMail: dthaler@microsoft.com"
+    DESCRIPTION
+            "The MIB module for management of IP Tunnels,
+            independent of the specific encapsulation scheme in
+            use.
+
+            Copyright (C) The Internet Society (2005).  This
+            version of this MIB module is part of RFC 4087;  see
+            the RFC itself for full legal notices."
+
+    REVISION     "200505160000Z" -- May 16, 2005
+    DESCRIPTION
+            "IPv4-specific objects were deprecated, including
+            tunnelIfLocalAddress, tunnelIfRemoteAddress, the
+            tunnelConfigTable, and the tunnelMIBBasicGroup.
+
+            Added IP version-agnostic objects that should be used
+            instead, including tunnelIfAddressType,
+            tunnelIfLocalInetAddress, tunnelIfRemoteInetAddress,
+            the tunnelInetConfigTable, and the
+            tunnelIMIBInetGroup.
+
+            The new tunnelIfLocalInetAddress and
+            tunnelIfRemoteInetAddress objects are read-write,
+            rather than read-only.
+
+            Updated DESCRIPTION clauses of existing version-
+            agnostic objects (e.g., tunnelIfTOS) that contained
+            IPv4-specific text to cover IPv6 as well.
+
+            Added tunnelIfFlowLabel for tunnels over IPv6.
+
+            The encapsulation method was previously an INTEGER
+            type, and is now an IANA-maintained textual
+            convention.
+
+            Published as RFC 4087."
+    REVISION     "199908241200Z" -- August 24, 1999
+    DESCRIPTION
+            "Initial version, published as RFC 2667."
+    ::= { transmission 131 }
+
+tunnelMIBObjects OBJECT IDENTIFIER ::= { tunnelMIB 1 }
+
+tunnel      OBJECT IDENTIFIER ::= { tunnelMIBObjects 1 }
+
+-- the IP Tunnel MIB-Group
+--
+-- a collection of objects providing information about
+-- IP Tunnels
+
+tunnelIfTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF TunnelIfEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table containing information on
+            configured tunnels."
+    ::= { tunnel 1 }
+
+tunnelIfEntry OBJECT-TYPE
+    SYNTAX     TunnelIfEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) containing the information
+            on a particular configured tunnel."
+    INDEX      { ifIndex }
+    ::= { tunnelIfTable 1 }
+
+TunnelIfEntry ::= SEQUENCE {
+    tunnelIfLocalAddress            IpAddress,   -- deprecated
+    tunnelIfRemoteAddress           IpAddress,   -- deprecated
+    tunnelIfEncapsMethod            IANAtunnelType,
+    tunnelIfHopLimit                Integer32,
+    tunnelIfSecurity                INTEGER,
+    tunnelIfTOS                     Integer32,
+    tunnelIfFlowLabel               IPv6FlowLabelOrAny,
+    tunnelIfAddressType             InetAddressType,
+    tunnelIfLocalInetAddress        InetAddress,
+    tunnelIfRemoteInetAddress       InetAddress,
+    tunnelIfEncapsLimit             Integer32
+}
+
+tunnelIfLocalAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+            "The address of the local endpoint of the tunnel
+            (i.e., the source address used in the outer IP
+            header), or 0.0.0.0 if unknown or if the tunnel is
+            over IPv6.
+
+            Since this object does not support IPv6, it is
+            deprecated in favor of tunnelIfLocalInetAddress."
+    ::= { tunnelIfEntry 1 }
+
+tunnelIfRemoteAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+            "The address of the remote endpoint of the tunnel
+            (i.e., the destination address used in the outer IP
+            header), or 0.0.0.0 if unknown, or an IPv6 address, or
+
+            the tunnel is not a point-to-point link (e.g., if it
+            is a 6to4 tunnel).
+
+            Since this object does not support IPv6, it is
+            deprecated in favor of tunnelIfRemoteInetAddress."
+    ::= { tunnelIfEntry 2 }
+
+tunnelIfEncapsMethod OBJECT-TYPE
+    SYNTAX     IANAtunnelType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The encapsulation method used by the tunnel."
+    ::= { tunnelIfEntry 3 }
+
+tunnelIfHopLimit OBJECT-TYPE
+    SYNTAX     Integer32 (0 | 1..255)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The IPv4 TTL or IPv6 Hop Limit to use in the outer IP
+            header.  A value of 0 indicates that the value is
+            copied from the payload's header."
+    ::= { tunnelIfEntry 4 }
+
+tunnelIfSecurity OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   none(1),   -- no security
+                   ipsec(2),  -- IPsec security
+                   other(3)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "The method used by the tunnel to secure the outer IP
+            header.  The value ipsec indicates that IPsec is used
+            between the tunnel endpoints for authentication or
+            encryption or both.  More specific security-related
+            information may be available in a MIB module for the
+            security protocol in use."
+    ::= { tunnelIfEntry 5 }
+
+tunnelIfTOS OBJECT-TYPE
+    SYNTAX     Integer32 (-2..63)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The method used to set the high 6 bits (the
+
+            differentiated services codepoint) of the IPv4 TOS or
+            IPv6 Traffic Class in the outer IP header.  A value of
+            -1 indicates that the bits are copied from the
+            payload's header.  A value of -2 indicates that a
+            traffic conditioner is invoked and more information
+            may be available in a traffic conditioner MIB module.
+            A value between 0 and 63 inclusive indicates that the
+            bit field is set to the indicated value.
+
+            Note: instead of the name tunnelIfTOS, a better name
+            would have been tunnelIfDSCPMethod, but the existing
+            name appeared in RFC 2667 and existing objects cannot
+            be renamed."
+    ::= { tunnelIfEntry 6 }
+
+tunnelIfFlowLabel OBJECT-TYPE
+    SYNTAX     IPv6FlowLabelOrAny
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The method used to set the IPv6 Flow Label value.
+            This object need not be present in rows where
+            tunnelIfAddressType indicates the tunnel is not over
+            IPv6.  A value of -1 indicates that a traffic
+            conditioner is invoked and more information may be
+            available in a traffic conditioner MIB.  Any other
+            value indicates that the Flow Label field is set to
+            the indicated value."
+    ::= { tunnelIfEntry 7 }
+
+tunnelIfAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The type of address in the corresponding
+            tunnelIfLocalInetAddress and tunnelIfRemoteInetAddress
+            objects."
+    ::= { tunnelIfEntry 8 }
+
+tunnelIfLocalInetAddress OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The address of the local endpoint of the tunnel
+            (i.e., the source address used in the outer IP
+            header).  If the address is unknown, the value is
+
+            0.0.0.0 for IPv4 or :: for IPv6.  The type of this
+            object is given by tunnelIfAddressType."
+    ::= { tunnelIfEntry 9 }
+
+tunnelIfRemoteInetAddress OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The address of the remote endpoint of the tunnel
+            (i.e., the destination address used in the outer IP
+            header).  If the address is unknown or the tunnel is
+            not a point-to-point link (e.g., if it is a 6to4
+            tunnel), the value is 0.0.0.0 for tunnels over IPv4 or
+            :: for tunnels over IPv6.  The type of this object is
+            given by tunnelIfAddressType."
+    ::= { tunnelIfEntry 10 }
+
+tunnelIfEncapsLimit OBJECT-TYPE
+    SYNTAX     Integer32 (-1 | 0..255)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+            "The maximum number of additional encapsulations
+            permitted for packets undergoing encapsulation at this
+            node.  A value of -1 indicates that no limit is
+            present (except as a result of the packet size)."
+    REFERENCE  "RFC 2473, section 4.1.1"
+    ::= { tunnelIfEntry 11 }
+
+tunnelConfigTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF TunnelConfigEntry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+            "The (conceptual) table containing information on
+            configured tunnels.  This table can be used to map a
+            set of tunnel endpoints to the associated ifIndex
+            value.  It can also be used for row creation.  Note
+            that every row in the tunnelIfTable with a fixed IPv4
+            destination address should have a corresponding row in
+            the tunnelConfigTable, regardless of whether it was
+            created via SNMP.
+
+            Since this table does not support IPv6, it is
+            deprecated in favor of tunnelInetConfigTable."
+    ::= { tunnel 2 }
+
+tunnelConfigEntry OBJECT-TYPE
+    SYNTAX     TunnelConfigEntry
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+            "An entry (conceptual row) containing the information
+            on a particular configured tunnel.
+
+            Since this entry does not support IPv6, it is
+            deprecated in favor of tunnelInetConfigEntry."
+    INDEX      { tunnelConfigLocalAddress,
+                 tunnelConfigRemoteAddress,
+                 tunnelConfigEncapsMethod,
+                 tunnelConfigID }
+    ::= { tunnelConfigTable 1 }
+
+TunnelConfigEntry ::= SEQUENCE {
+    tunnelConfigLocalAddress            IpAddress,
+    tunnelConfigRemoteAddress           IpAddress,
+    tunnelConfigEncapsMethod            IANAtunnelType,
+    tunnelConfigID                      Integer32,
+    tunnelConfigIfIndex                 InterfaceIndexOrZero,
+    tunnelConfigStatus                  RowStatus
+}
+
+tunnelConfigLocalAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+            "The address of the local endpoint of the tunnel, or
+            0.0.0.0 if the device is free to choose any of its
+            addresses at tunnel establishment time.
+
+            Since this object does not support IPv6, it is
+            deprecated in favor of tunnelInetConfigLocalAddress."
+    ::= { tunnelConfigEntry 1 }
+
+tunnelConfigRemoteAddress OBJECT-TYPE
+    SYNTAX     IpAddress
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+            "The address of the remote endpoint of the tunnel.
+
+            Since this object does not support IPv6, it is
+            deprecated in favor of tunnelInetConfigRemoteAddress."
+    ::= { tunnelConfigEntry 2 }
+
+tunnelConfigEncapsMethod OBJECT-TYPE
+    SYNTAX     IANAtunnelType
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+            "The encapsulation method used by the tunnel.
+
+            Since this object does not support IPv6, it is
+            deprecated in favor of tunnelInetConfigEncapsMethod."
+    ::= { tunnelConfigEntry 3 }
+
+tunnelConfigID OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS not-accessible
+    STATUS     deprecated
+    DESCRIPTION
+            "An identifier used to distinguish between multiple
+            tunnels of the same encapsulation method, with the
+            same endpoints.  If the encapsulation protocol only
+            allows one tunnel per set of endpoint addresses (such
+            as for GRE or IP-in-IP), the value of this object is
+            1.  For encapsulation methods (such as L2F) which
+            allow multiple parallel tunnels, the manager is
+            responsible for choosing any ID which does not
+            conflict with an existing row, such as choosing a
+            random number.
+
+            Since this object does not support IPv6, it is
+            deprecated in favor of tunnelInetConfigID."
+    ::= { tunnelConfigEntry 4 }
+
+tunnelConfigIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndexOrZero
+    MAX-ACCESS read-only
+    STATUS     deprecated
+    DESCRIPTION
+            "If the value of tunnelConfigStatus for this row is
+            active, then this object contains the value of ifIndex
+            corresponding to the tunnel interface.  A value of 0
+            is not legal in the active state, and means that the
+            interface index has not yet been assigned.
+
+            Since this object does not support IPv6, it is
+            deprecated in favor of tunnelInetConfigIfIndex."
+    ::= { tunnelConfigEntry 5 }
+
+tunnelConfigStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     deprecated
+    DESCRIPTION
+            "The status of this row, by which new entries may be
+            created, or old entries deleted from this table.  The
+            agent need not support setting this object to
+            createAndWait or notInService since there are no other
+            writable objects in this table, and writable objects
+            in rows of corresponding tables such as the
+            tunnelIfTable may be modified while this row is
+            active.
+
+            To create a row in this table for an encapsulation
+            method which does not support multiple parallel
+            tunnels with the same endpoints, the management
+            station should simply use a tunnelConfigID of 1, and
+            set tunnelConfigStatus to createAndGo.  For
+            encapsulation methods such as L2F which allow multiple
+            parallel tunnels, the management station may select a
+            pseudo-random number to use as the tunnelConfigID and
+            set tunnelConfigStatus to createAndGo.  In the event
+            that this ID is already in use and an
+            inconsistentValue is returned in response to the set
+            operation, the management station should simply select
+            a new pseudo-random number and retry the operation.
+
+            Creating a row in this table will cause an interface
+            index to be assigned by the agent in an
+            implementation-dependent manner, and corresponding
+            rows will be instantiated in the ifTable and the
+            tunnelIfTable.  The status of this row will become
+            active as soon as the agent assigns the interface
+            index, regardless of whether the interface is
+            operationally up.
+
+            Deleting a row in this table will likewise delete the
+            corresponding row in the ifTable and in the
+            tunnelIfTable.
+
+            Since this object does not support IPv6, it is
+            deprecated in favor of tunnelInetConfigStatus."
+    ::= { tunnelConfigEntry 6 }
+
+tunnelInetConfigTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF TunnelInetConfigEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The (conceptual) table containing information on
+            configured tunnels.  This table can be used to map a
+            set of tunnel endpoints to the associated ifIndex
+            value.  It can also be used for row creation.  Note
+            that every row in the tunnelIfTable with a fixed
+            destination address should have a corresponding row in
+            the tunnelInetConfigTable, regardless of whether it
+            was created via SNMP."
+    ::= { tunnel 3 }
+
+tunnelInetConfigEntry OBJECT-TYPE
+    SYNTAX     TunnelInetConfigEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An entry (conceptual row) containing the information
+            on a particular configured tunnel.  Note that there is
+            a 128 subid maximum for object OIDs.  Implementers
+            need to be aware that if the total number of octets in
+            tunnelInetConfigLocalAddress and
+            tunnelInetConfigRemoteAddress exceeds 110 then OIDs of
+            column instances in this table will have more than 128
+            sub-identifiers and cannot be accessed using SNMPv1,
+            SNMPv2c, or SNMPv3.  In practice this is not expected
+            to be a problem since IPv4 and IPv6 addresses will not
+            cause the limit to be reached, but if other types are
+            supported by an agent, care must be taken to ensure
+            that the sum of the lengths do not cause the limit to
+            be exceeded."
+    INDEX      { tunnelInetConfigAddressType,
+                 tunnelInetConfigLocalAddress,
+                 tunnelInetConfigRemoteAddress,
+                 tunnelInetConfigEncapsMethod,
+                 tunnelInetConfigID }
+    ::= { tunnelInetConfigTable 1 }
+
+TunnelInetConfigEntry ::= SEQUENCE {
+    tunnelInetConfigAddressType         InetAddressType,
+    tunnelInetConfigLocalAddress        InetAddress,
+    tunnelInetConfigRemoteAddress       InetAddress,
+    tunnelInetConfigEncapsMethod        IANAtunnelType,
+    tunnelInetConfigID                  Integer32,
+    tunnelInetConfigIfIndex             InterfaceIndexOrZero,
+    tunnelInetConfigStatus              RowStatus,
+    tunnelInetConfigStorageType         StorageType
+}
+
+tunnelInetConfigAddressType OBJECT-TYPE
+    SYNTAX     InetAddressType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The address type over which the tunnel encapsulates
+            packets."
+    ::= { tunnelInetConfigEntry 1 }
+
+tunnelInetConfigLocalAddress OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The address of the local endpoint of the tunnel, or
+            0.0.0.0 (for IPv4) or :: (for IPv6) if the device is
+            free to choose any of its addresses at tunnel
+            establishment time."
+    ::= { tunnelInetConfigEntry 2 }
+
+tunnelInetConfigRemoteAddress OBJECT-TYPE
+    SYNTAX     InetAddress
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The address of the remote endpoint of the tunnel."
+    ::= { tunnelInetConfigEntry 3 }
+
+tunnelInetConfigEncapsMethod OBJECT-TYPE
+    SYNTAX     IANAtunnelType
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "The encapsulation method used by the tunnel."
+    ::= { tunnelInetConfigEntry 4 }
+
+tunnelInetConfigID OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+            "An identifier used to distinguish between multiple
+            tunnels of the same encapsulation method, with the
+            same endpoints.  If the encapsulation protocol only
+            allows one tunnel per set of endpoint addresses (such
+            as for GRE or IP-in-IP), the value of this object is
+            1.  For encapsulation methods (such as L2F) which
+            allow multiple parallel tunnels, the manager is
+            responsible for choosing any ID which does not
+
+            conflict with an existing row, such as choosing a
+            random number."
+    ::= { tunnelInetConfigEntry 5 }
+
+tunnelInetConfigIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndexOrZero
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+            "If the value of tunnelInetConfigStatus for this row
+            is active, then this object contains the value of
+            ifIndex corresponding to the tunnel interface.  A
+            value of 0 is not legal in the active state, and means
+            that the interface index has not yet been assigned."
+    ::= { tunnelInetConfigEntry 6 }
+
+tunnelInetConfigStatus OBJECT-TYPE
+    SYNTAX     RowStatus
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The status of this row, by which new entries may be
+            created, or old entries deleted from this table.  The
+            agent need not support setting this object to
+            createAndWait or notInService since there are no other
+            writable objects in this table, and writable objects
+            in rows of corresponding tables such as the
+            tunnelIfTable may be modified while this row is
+            active.
+
+            To create a row in this table for an encapsulation
+            method which does not support multiple parallel
+            tunnels with the same endpoints, the management
+            station should simply use a tunnelInetConfigID of 1,
+            and set tunnelInetConfigStatus to createAndGo.  For
+            encapsulation methods such as L2F which allow multiple
+            parallel tunnels, the management station may select a
+            pseudo-random number to use as the tunnelInetConfigID
+            and set tunnelInetConfigStatus to createAndGo.  In the
+            event that this ID is already in use and an
+            inconsistentValue is returned in response to the set
+            operation, the management station should simply select
+            a new pseudo-random number and retry the operation.
+
+            Creating a row in this table will cause an interface
+            index to be assigned by the agent in an
+            implementation-dependent manner, and corresponding
+            rows will be instantiated in the ifTable and the
+
+            tunnelIfTable.  The status of this row will become
+            active as soon as the agent assigns the interface
+            index, regardless of whether the interface is
+            operationally up.
+
+            Deleting a row in this table will likewise delete the
+            corresponding row in the ifTable and in the
+            tunnelIfTable."
+    ::= { tunnelInetConfigEntry 7 }
+
+tunnelInetConfigStorageType OBJECT-TYPE
+    SYNTAX     StorageType
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+            "The storage type of this row.  If the row is
+            permanent(4), no objects in the row need be writable."
+    ::= { tunnelInetConfigEntry 8 }
+
+-- conformance information
+
+tunnelMIBConformance
+                  OBJECT IDENTIFIER ::= { tunnelMIB 2 }
+tunnelMIBCompliances
+                  OBJECT IDENTIFIER ::= { tunnelMIBConformance 1 }
+tunnelMIBGroups  OBJECT IDENTIFIER ::= { tunnelMIBConformance 2 }
+
+-- compliance statements
+
+tunnelMIBCompliance MODULE-COMPLIANCE
+    STATUS  deprecated
+    DESCRIPTION
+            "The (deprecated) IPv4-only compliance statement for
+            the IP Tunnel MIB.
+
+            This is deprecated in favor of
+            tunnelMIBInetFullCompliance and
+            tunnelMIBInetReadOnlyCompliance."
+    MODULE  -- this module
+    MANDATORY-GROUPS { tunnelMIBBasicGroup }
+
+        OBJECT      tunnelIfHopLimit
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      tunnelIfTOS
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      tunnelConfigStatus
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+   ::= { tunnelMIBCompliances 1 }
+
+tunnelMIBInetFullCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The full compliance statement for the IP Tunnel MIB."
+    MODULE  -- this module
+    MANDATORY-GROUPS { tunnelMIBInetGroup }
+
+        OBJECT      tunnelIfAddressType
+        SYNTAX      InetAddressType { ipv4(1), ipv6(2),
+                                      ipv4z(3), ipv6z(4) }
+        DESCRIPTION
+            "An implementation is only required to support IPv4
+            and/or IPv6 addresses.  An implementation only needs to
+            support the addresses it actually supports on the
+            device."
+   ::= { tunnelMIBCompliances 2 }
+
+tunnelMIBInetReadOnlyCompliance MODULE-COMPLIANCE
+    STATUS  current
+    DESCRIPTION
+            "The read-only compliance statement for the IP Tunnel
+            MIB."
+    MODULE  -- this module
+    MANDATORY-GROUPS { tunnelMIBInetGroup }
+
+        OBJECT      tunnelIfHopLimit
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      tunnelIfTOS
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      tunnelIfFlowLabel
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      tunnelIfAddressType
+        SYNTAX      InetAddressType { ipv4(1), ipv6(2),
+                                      ipv4z(3), ipv6z(4) }
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required.
+
+            An implementation is only required to support IPv4
+            and/or IPv6 addresses.  An implementation only needs to
+            support the addresses it actually supports on the
+            device."
+
+        OBJECT      tunnelIfLocalInetAddress
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      tunnelIfRemoteInetAddress
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      tunnelIfEncapsLimit
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+
+        OBJECT      tunnelInetConfigStatus
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required, and active is the only
+            status that needs to be supported."
+
+        OBJECT      tunnelInetConfigStorageType
+        MIN-ACCESS  read-only
+        DESCRIPTION
+            "Write access is not required."
+   ::= { tunnelMIBCompliances 3 }
+
+-- units of conformance
+
+tunnelMIBBasicGroup OBJECT-GROUP
+    OBJECTS { tunnelIfLocalAddress, tunnelIfRemoteAddress,
+       tunnelIfEncapsMethod, tunnelIfHopLimit, tunnelIfTOS,
+       tunnelIfSecurity, tunnelConfigIfIndex, tunnelConfigStatus }
+    STATUS  deprecated
+    DESCRIPTION
+            "A collection of objects to support basic management
+
+            of IPv4 Tunnels.  Since this group cannot support
+            IPv6, it is deprecated in favor of
+            tunnelMIBInetGroup."
+    ::= { tunnelMIBGroups 1 }
+
+tunnelMIBInetGroup OBJECT-GROUP
+    OBJECTS { tunnelIfAddressType, tunnelIfLocalInetAddress,
+       tunnelIfRemoteInetAddress, tunnelIfEncapsMethod,
+       tunnelIfEncapsLimit,
+       tunnelIfHopLimit, tunnelIfTOS, tunnelIfFlowLabel,
+       tunnelIfSecurity, tunnelInetConfigIfIndex,
+       tunnelInetConfigStatus, tunnelInetConfigStorageType }
+    STATUS  current
+    DESCRIPTION
+            "A collection of objects to support basic management
+            of IPv4 and IPv6 Tunnels."
+    ::= { tunnelMIBGroups 2 }
+
+END