T2898: add ndp-proxy service

VyOS CLI command
  set service ndp-proxy interface eth0 prefix 2001:db8::/64 mode 'static'

Will generate the following NDP proxy configuration

  $ cat /run/ndppd/ndppd.conf
  # autogenerated by service_ndp-proxy.py

  # This tells 'ndppd' how often to reload the route file /proc/net/ipv6_route
  route-ttl 30000

  # This sets up a listener, that will listen for any Neighbor Solicitation
  # messages, and respond to them according to a set of rules
  proxy eth0 {
      # Turn on or off the router flag for Neighbor Advertisements
      router no
      # Control how long to wait for a Neighbor Advertisment message before invalidating the entry (milliseconds)
      timeout 500
      # Control how long a valid or invalid entry remains in the cache (milliseconds)
      ttl 30000

      # This is a rule that the target address is to match against. If no netmask
      # is provided, /128 is assumed. You may have several rule sections, and the
      # addresses may or may not overlap.
      rule 2001:db8::/64 {
          static
      }
  }

(cherry picked from commit 4d721a58020971d00ab854c37b68e88359999f9c)

1 files changed, 6 insertions, 0 deletions

diff --git a/op-mode-definitions/show-log.xml.in b/op-mode-definitions/show-log.xml.in
index ee9f1cc3c..6cd53882d 100644
--- a/op-mode-definitions/show-log.xml.in
+++ b/op-mode-definitions/show-log.xml.in
@@ -244,6 +244,12 @@
             </properties>
             <command>egrep -i "kernel:.*\[NAT-[A-Z]{3,}-[0-9]+(-MASQ)?\]" $(find /var/log -maxdepth 1 -type f -name messages\* | sort -t. -k2nr)</command>
           </leafNode>
+          <leafNode name="ndp-proxy">
+            <properties>
+              <help>Show log for Neighbor Discovery Protocol (NDP) Proxy</help>
+            </properties>
+            <command>journalctl --no-hostname --boot --unit ndppd.service</command>
+          </leafNode>
           <leafNode name="nhrp">
             <properties>
               <help>Show log for Next Hop Resolution Protocol (NHRP)</help>