vif: T3349: use fixed ordering when enabling parent and child interface

When a VIF/VLAN interface is placed in admin down state but the lower
interface, serving the vlan, is moved from admin down -> admin up, all its
vlan interfaces will be placed in admin up state, too.

This is bad as a VLAN interface will become admin up even if its specified as
admin down after a reboot.

To reproduce:
  set interfaces ethernet eth1 vif 20 disable
  set interfaces ethernet eth1 disable
  commit

  delete interfaces ethernet eth1 disable
  commit

Now check the interface state and it returns UP,LOWER_UP
7: eth1.20@eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether 00:50:56:b3:09:07 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::250:56ff:feb3:907/64 scope link
       valid_lft forever preferred_lft forever

16 files changed, 17 insertions, 252 deletions

diff --git a/python/vyos/ifconfig/bond.py b/python/vyos/ifconfig/bond.py
index 28b5da3ee..bfa3b0025 100644
--- a/python/vyos/ifconfig/bond.py
+++ b/python/vyos/ifconfig/bond.py
@@ -341,9 +341,6 @@ class BondIf(Interface):
         if 'shutdown_required' in config:
             self.set_admin_state('down')
 
-        # call base class first
-        super().update(config)
-
         # ARP monitor targets need to be synchronized between sysfs and CLI.
         # Unfortunately an address can't be send twice to sysfs as this will
         # result in the following exception:  OSError: [Errno 22] Invalid argument.
@@ -402,12 +399,5 @@ class BondIf(Interface):
         value = config.get('primary')
         if value: self.set_primary(value)
 
-        # Enable/Disable of an interface must always be done at the end of the
-        # derived class to make use of the ref-counting set_admin_state()
-        # function. We will only enable the interface if 'up' was called as
-        # often as 'down'. This is required by some interface implementations
-        # as certain parameters can only be changed when the interface is
-        # in admin-down state. This ensures the link does not flap during
-        # reconfiguration.
-        state = 'down' if 'disable' in config else 'up'
-        self.set_admin_state(state)
+        # call base class first
+        super().update(config)
diff --git a/python/vyos/ifconfig/bridge.py b/python/vyos/ifconfig/bridge.py
index 69f652547..600bd3db8 100644
--- a/python/vyos/ifconfig/bridge.py
+++ b/python/vyos/ifconfig/bridge.py
@@ -233,11 +233,6 @@ class BridgeIf(Interface):
         interface setup code and provide a single point of entry when workin
         on any interface. """
 
-        # call base class first
-        super().update(config)
-
-        ifname = config['ifname']
-
         # Set ageing time
         value = config.get('aging')
         self.set_ageing_time(value)
@@ -277,6 +272,7 @@ class BridgeIf(Interface):
         vlan_filter = '1' if 'enable_vlan' in config else '0'
         self.set_vlan_filter(vlan_filter)
 
+        ifname = config['ifname']
         if int(vlan_filter):
             add_vlan = []
             cur_vlan_ids = get_vlan_ids(ifname)
@@ -364,12 +360,5 @@ class BridgeIf(Interface):
                         cmd = f'bridge vlan add dev {interface} vid {native_vlan_id} pvid untagged master'
                         self._cmd(cmd)
 
-        # Enable/Disable of an interface must always be done at the end of the
-        # derived class to make use of the ref-counting set_admin_state()
-        # function. We will only enable the interface if 'up' was called as
-        # often as 'down'. This is required by some interface implementations
-        # as certain parameters can only be changed when the interface is
-        # in admin-down state. This ensures the link does not flap during
-        # reconfiguration.
-        state = 'down' if 'disable' in config else 'up'
-        self.set_admin_state(state)
+        # call base class first
+        super().update(config)
diff --git a/python/vyos/ifconfig/dummy.py b/python/vyos/ifconfig/dummy.py
index 0019fc52b..d45769931 100644
--- a/python/vyos/ifconfig/dummy.py
+++ b/python/vyos/ifconfig/dummy.py
@@ -31,22 +31,3 @@ class DummyIf(Interface):
             'prefixes': ['dum', ],
         },
     }
-
-    def update(self, config):
-        """ General helper function which works on a dictionary retrived by
-        get_config_dict(). It's main intention is to consolidate the scattered
-        interface setup code and provide a single point of entry when workin
-        on any interface. """
-
-        # call base class first
-        super().update(config)
-
-        # Enable/Disable of an interface must always be done at the end of the
-        # derived class to make use of the ref-counting set_admin_state()
-        # function. We will only enable the interface if 'up' was called as
-        # often as 'down'. This is required by some interface implementations
-        # as certain parameters can only be changed when the interface is
-        # in admin-down state. This ensures the link does not flap during
-        # reconfiguration.
-        state = 'down' if 'disable' in config else 'up'
-        self.set_admin_state(state)
diff --git a/python/vyos/ifconfig/erspan.py b/python/vyos/ifconfig/erspan.py
index 9e24cf6cd..03b2acdbf 100755
--- a/python/vyos/ifconfig/erspan.py
+++ b/python/vyos/ifconfig/erspan.py
@@ -47,25 +47,6 @@ class _ERSpan(Interface):
     def change_options(self):
         pass
 
-    def update(self, config):
-        """ General helper function which works on a dictionary retrived by
-        get_config_dict(). It's main intention is to consolidate the scattered
-        interface setup code and provide a single point of entry when workin
-        on any interface. """
-
-        # call base class first
-        super().update(config)
-
-        # Enable/Disable of an interface must always be done at the end of the
-        # derived class to make use of the ref-counting set_admin_state()
-        # function. We will only enable the interface if 'up' was called as
-        # often as 'down'. This is required by some interface implementations
-        # as certain parameters can only be changed when the interface is
-        # in admin-down state. This ensures the link does not flap during
-        # reconfiguration.
-        state = 'down' if 'disable' in config else 'up'
-        self.set_admin_state(state)
-
     def _create(self):
         pass
 
diff --git a/python/vyos/ifconfig/ethernet.py b/python/vyos/ifconfig/ethernet.py
index aca0aeead..b89ca5a5c 100644
--- a/python/vyos/ifconfig/ethernet.py
+++ b/python/vyos/ifconfig/ethernet.py
@@ -318,9 +318,6 @@ class EthernetIf(Interface):
         interface setup code and provide a single point of entry when workin
         on any interface. """
 
-        # call base class first
-        super().update(config)
-
         # disable ethernet flow control (pause frames)
         value = 'off' if 'disable_flow_control' in config else 'on'
         self.set_flow_control(value)
@@ -354,12 +351,5 @@ class EthernetIf(Interface):
             for b_type in config['ring_buffer']:
                 self.set_ring_buffer(b_type, config['ring_buffer'][b_type])
 
-        # Enable/Disable of an interface must always be done at the end of the
-        # derived class to make use of the ref-counting set_admin_state()
-        # function. We will only enable the interface if 'up' was called as
-        # often as 'down'. This is required by some interface implementations
-        # as certain parameters can only be changed when the interface is
-        # in admin-down state. This ensures the link does not flap during
-        # reconfiguration.
-        state = 'down' if 'disable' in config else 'up'
-        self.set_admin_state(state)
+        # call base class first
+        super().update(config)
diff --git a/python/vyos/ifconfig/geneve.py b/python/vyos/ifconfig/geneve.py
index 1b3ee0dc9..6747d2bd6 100644
--- a/python/vyos/ifconfig/geneve.py
+++ b/python/vyos/ifconfig/geneve.py
@@ -42,22 +42,3 @@ class GeneveIf(Interface):
 
         # interface is always A/D down. It needs to be enabled explicitly
         self.set_admin_state('down')
-
-    def update(self, config):
-        """ General helper function which works on a dictionary retrived by
-        get_config_dict(). It's main intention is to consolidate the scattered
-        interface setup code and provide a single point of entry when workin
-        on any interface. """
-
-        # call base class first
-        super().update(config)
-
-        # Enable/Disable of an interface must always be done at the end of the
-        # derived class to make use of the ref-counting set_admin_state()
-        # function. We will only enable the interface if 'up' was called as
-        # often as 'down'. This is required by some interface implementations
-        # as certain parameters can only be changed when the interface is
-        # in admin-down state. This ensures the link does not flap during
-        # reconfiguration.
-        state = 'down' if 'disable' in config else 'up'
-        self.set_admin_state(state)
diff --git a/python/vyos/ifconfig/interface.py b/python/vyos/ifconfig/interface.py
index 9c0ee2ab1..dff9fa810 100644
--- a/python/vyos/ifconfig/interface.py
+++ b/python/vyos/ifconfig/interface.py
@@ -1241,6 +1241,16 @@ class Interface(Control):
         # configure port mirror
         self.set_mirror()
 
+        # Enable/Disable of an interface must always be done at the end of the
+        # derived class to make use of the ref-counting set_admin_state()
+        # function. We will only enable the interface if 'up' was called as
+        # often as 'down'. This is required by some interface implementations
+        # as certain parameters can only be changed when the interface is
+        # in admin-down state. This ensures the link does not flap during
+        # reconfiguration.
+        state = 'down' if 'disable' in config else 'up'
+        self.set_admin_state(state)
+
         # remove no longer required 802.1ad (Q-in-Q VLANs)
         ifname = config['ifname']
         for vif_s_id in config.get('vif_s_remove', {}):
@@ -1359,22 +1369,3 @@ class VLANIf(Interface):
 
     def set_mirror(self):
         return
-
-    def update(self, config):
-        """ General helper function which works on a dictionary retrived by
-        get_config_dict(). It's main intention is to consolidate the scattered
-        interface setup code and provide a single point of entry when workin
-        on any interface. """
-
-        # call base class first
-        super().update(config)
-
-        # Enable/Disable of an interface must always be done at the end of the
-        # derived class to make use of the ref-counting set_admin_state()
-        # function. We will only enable the interface if 'up' was called as
-        # often as 'down'. This is required by some interface implementations
-        # as certain parameters can only be changed when the interface is
-        # in admin-down state. This ensures the link does not flap during
-        # reconfiguration.
-        state = 'down' if 'disable' in config else 'up'
-        self.set_admin_state(state)
diff --git a/python/vyos/ifconfig/l2tpv3.py b/python/vyos/ifconfig/l2tpv3.py
index b717394a6..7ff0fdd0e 100644
--- a/python/vyos/ifconfig/l2tpv3.py
+++ b/python/vyos/ifconfig/l2tpv3.py
@@ -78,24 +78,3 @@ class L2TPv3If(Interface):
             if 'tunnel_id' in self.config:
                 cmd = 'ip l2tp del tunnel tunnel_id {tunnel_id}'
                 self._cmd(cmd.format(**self.config))
-
-
-    def update(self, config):
-        """ General helper function which works on a dictionary retrived by
-        get_config_dict(). It's main intention is to consolidate the scattered
-        interface setup code and provide a single point of entry when workin
-        on any interface. """
-
-        # call base class first
-        super().update(config)
-
-        # Enable/Disable of an interface must always be done at the end of the
-        # derived class to make use of the ref-counting set_admin_state()
-        # function. We will only enable the interface if 'up' was called as
-        # often as 'down'. This is required by some interface implementations
-        # as certain parameters can only be changed when the interface is
-        # in admin-down state. This ensures the link does not flap during
-        # reconfiguration.
-        state = 'down' if 'disable' in config else 'up'
-        self.set_admin_state(state)
-
diff --git a/python/vyos/ifconfig/loopback.py b/python/vyos/ifconfig/loopback.py
index d323feed8..192c12f5c 100644
--- a/python/vyos/ifconfig/loopback.py
+++ b/python/vyos/ifconfig/loopback.py
@@ -66,13 +66,3 @@ class LoopbackIf(Interface):
 
         # call base class
         super().update(config)
-
-        # Enable/Disable of an interface must always be done at the end of the
-        # derived class to make use of the ref-counting set_admin_state()
-        # function. We will only enable the interface if 'up' was called as
-        # often as 'down'. This is required by some interface implementations
-        # as certain parameters can only be changed when the interface is
-        # in admin-down state. This ensures the link does not flap during
-        # reconfiguration.
-        state = 'down' if 'disable' in config else 'up'
-        self.set_admin_state(state)
diff --git a/python/vyos/ifconfig/macsec.py b/python/vyos/ifconfig/macsec.py
index c15273080..1a78d18d8 100644
--- a/python/vyos/ifconfig/macsec.py
+++ b/python/vyos/ifconfig/macsec.py
@@ -48,22 +48,3 @@ class MACsecIf(Interface):
 
         # interface is always A/D down. It needs to be enabled explicitly
         self.set_admin_state('down')
-
-    def update(self, config):
-        """ General helper function which works on a dictionary retrived by
-        get_config_dict(). It's main intention is to consolidate the scattered
-        interface setup code and provide a single point of entry when workin
-        on any interface. """
-
-        # call base class first
-        super().update(config)
-
-        # Enable/Disable of an interface must always be done at the end of the
-        # derived class to make use of the ref-counting set_admin_state()
-        # function. We will only enable the interface if 'up' was called as
-        # often as 'down'. This is required by some interface implementations
-        # as certain parameters can only be changed when the interface is
-        # in admin-down state. This ensures the link does not flap during
-        # reconfiguration.
-        state = 'down' if 'disable' in config else 'up'
-        self.set_admin_state(state)
diff --git a/python/vyos/ifconfig/macvlan.py b/python/vyos/ifconfig/macvlan.py
index 73e2eea9e..776014bc3 100644
--- a/python/vyos/ifconfig/macvlan.py
+++ b/python/vyos/ifconfig/macvlan.py
@@ -38,22 +38,3 @@ class MACVLANIf(Interface):
         ifname = self.config['ifname']
         cmd = f'ip link set dev {ifname} type macvlan mode {mode}'
         return self._cmd(cmd)
-
-    def update(self, config):
-        """ General helper function which works on a dictionary retrived by
-        get_config_dict(). It's main intention is to consolidate the scattered
-        interface setup code and provide a single point of entry when workin
-        on any interface. """
-
-        # call base class first
-        super().update(config)
-
-        # Enable/Disable of an interface must always be done at the end of the
-        # derived class to make use of the ref-counting set_admin_state()
-        # function. We will only enable the interface if 'up' was called as
-        # often as 'down'. This is required by some interface implementations
-        # as certain parameters can only be changed when the interface is
-        # in admin-down state. This ensures the link does not flap during
-        # reconfiguration.
-        state = 'down' if 'disable' in config else 'up'
-        self.set_admin_state(state)
diff --git a/python/vyos/ifconfig/tunnel.py b/python/vyos/ifconfig/tunnel.py
index bb940b0cf..b9d5ab983 100644
--- a/python/vyos/ifconfig/tunnel.py
+++ b/python/vyos/ifconfig/tunnel.py
@@ -184,13 +184,3 @@ class TunnelIf(Interface):
 
         # call base class first
         super().update(config)
-
-        # Enable/Disable of an interface must always be done at the end of the
-        # derived class to make use of the ref-counting set_admin_state()
-        # function. We will only enable the interface if 'up' was called as
-        # often as 'down'. This is required by some interface implementations
-        # as certain parameters can only be changed when the interface is
-        # in admin-down state. This ensures the link does not flap during
-        # reconfiguration.
-        state = 'down' if 'disable' in config else 'up'
-        self.set_admin_state(state)
diff --git a/python/vyos/ifconfig/vtun.py b/python/vyos/ifconfig/vtun.py
index 8f027cf9d..6fb414e56 100644
--- a/python/vyos/ifconfig/vtun.py
+++ b/python/vyos/ifconfig/vtun.py
@@ -47,22 +47,3 @@ class VTunIf(Interface):
     def del_addr(self, addr):
         # IP addresses are managed by OpenVPN daemon
         pass
-
-    def update(self, config):
-        """ General helper function which works on a dictionary retrived by
-        get_config_dict(). It's main intention is to consolidate the scattered
-        interface setup code and provide a single point of entry when workin
-        on any interface. """
-
-        # call base class first
-        super().update(config)
-
-        # Enable/Disable of an interface must always be done at the end of the
-        # derived class to make use of the ref-counting set_admin_state()
-        # function. We will only enable the interface if 'up' was called as
-        # often as 'down'. This is required by some interface implementations
-        # as certain parameters can only be changed when the interface is
-        # in admin-down state. This ensures the link does not flap during
-        # reconfiguration.
-        state = 'down' if 'disable' in config else 'up'
-        self.set_admin_state(state)
diff --git a/python/vyos/ifconfig/vxlan.py b/python/vyos/ifconfig/vxlan.py
index e17643aca..6556aff5a 100644
--- a/python/vyos/ifconfig/vxlan.py
+++ b/python/vyos/ifconfig/vxlan.py
@@ -78,22 +78,3 @@ class VXLANIf(Interface):
 
         self._cmd(cmd.format(**self.config))
         self.set_admin_state('down')
-
-    def update(self, config):
-        """ General helper function which works on a dictionary retrived by
-        get_config_dict(). It's main intention is to consolidate the scattered
-        interface setup code and provide a single point of entry when workin
-        on any interface. """
-
-        # call base class first
-        super().update(config)
-
-        # Enable/Disable of an interface must always be done at the end of the
-        # derived class to make use of the ref-counting set_admin_state()
-        # function. We will only enable the interface if 'up' was called as
-        # often as 'down'. This is required by some interface implementations
-        # as certain parameters can only be changed when the interface is
-        # in admin-down state. This ensures the link does not flap during
-        # reconfiguration.
-        state = 'down' if 'disable' in config else 'up'
-        self.set_admin_state(state)
diff --git a/python/vyos/ifconfig/wireguard.py b/python/vyos/ifconfig/wireguard.py
index f377e2b1d..e5b9c4408 100644
--- a/python/vyos/ifconfig/wireguard.py
+++ b/python/vyos/ifconfig/wireguard.py
@@ -247,14 +247,3 @@ class WireGuardIf(Interface):
 
         # call base class
         super().update(config)
-
-        # Enable/Disable of an interface must always be done at the end of the
-        # derived class to make use of the ref-counting set_admin_state()
-        # function. We will only enable the interface if 'up' was called as
-        # often as 'down'. This is required by some interface implementations
-        # as certain parameters can only be changed when the interface is
-        # in admin-down state. This ensures the link does not flap during
-        # reconfiguration.
-        state = 'down' if 'disable' in config else 'up'
-        self.set_admin_state(state)
-
diff --git a/python/vyos/ifconfig/wireless.py b/python/vyos/ifconfig/wireless.py
index 6c0eeec44..748b6e02d 100644
--- a/python/vyos/ifconfig/wireless.py
+++ b/python/vyos/ifconfig/wireless.py
@@ -63,13 +63,3 @@ class WiFiIf(Interface):
         # re-add ourselves to any bridge we might have fallen out of
         if bridge_member:
             self.add_to_bridge(bridge_member)
-
-        # Enable/Disable of an interface must always be done at the end of the
-        # derived class to make use of the ref-counting set_admin_state()
-        # function. We will only enable the interface if 'up' was called as
-        # often as 'down'. This is required by some interface implementations
-        # as certain parameters can only be changed when the interface is
-        # in admin-down state. This ensures the link does not flap during
-        # reconfiguration.
-        state = 'down' if 'disable' in config else 'up'
-        self.set_admin_state(state)