T6199: drop unused sphinx documentation folder

4 files changed, 0 insertions, 461 deletions

diff --git a/sphinx/Makefile b/sphinx/Makefile
deleted file mode 100644
index 1e344639e..000000000
--- a/sphinx/Makefile
+++ /dev/null
@@ -1,177 +0,0 @@
-# Makefile for Sphinx documentation
-#
-
-# You can set these variables from the command line.
-SPHINXOPTS    =
-SPHINXBUILD   = sphinx-build
-PAPER         =
-BUILDDIR      = build
-
-# User-friendly check for sphinx-build
-ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $$?), 1)
-$(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don't have Sphinx installed, grab it from http://sphinx-doc.org/)
-endif
-
-# Internal variables.
-PAPEROPT_a4     = -D latex_paper_size=a4
-PAPEROPT_letter = -D latex_paper_size=letter
-ALLSPHINXOPTS   = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) source
-# the i18n builder cannot share the environment and doctrees with the others
-I18NSPHINXOPTS  = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) source
-
-.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest gettext
-
-help:
-	@echo "Please use \`make <target>' where <target> is one of"
-	@echo "  html       to make standalone HTML files"
-	@echo "  dirhtml    to make HTML files named index.html in directories"
-	@echo "  singlehtml to make a single large HTML file"
-	@echo "  pickle     to make pickle files"
-	@echo "  json       to make JSON files"
-	@echo "  htmlhelp   to make HTML files and a HTML help project"
-	@echo "  qthelp     to make HTML files and a qthelp project"
-	@echo "  devhelp    to make HTML files and a Devhelp project"
-	@echo "  epub       to make an epub"
-	@echo "  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
-	@echo "  latexpdf   to make LaTeX files and run them through pdflatex"
-	@echo "  latexpdfja to make LaTeX files and run them through platex/dvipdfmx"
-	@echo "  text       to make text files"
-	@echo "  man        to make manual pages"
-	@echo "  texinfo    to make Texinfo files"
-	@echo "  info       to make Texinfo files and run them through makeinfo"
-	@echo "  gettext    to make PO message catalogs"
-	@echo "  changes    to make an overview of all changed/added/deprecated items"
-	@echo "  xml        to make Docutils-native XML files"
-	@echo "  pseudoxml  to make pseudoxml-XML files for display purposes"
-	@echo "  linkcheck  to check all external links for integrity"
-	@echo "  doctest    to run all doctests embedded in the documentation (if enabled)"
-
-clean:
-	rm -rf $(BUILDDIR)/*
-
-html:
-	$(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
-	@echo
-	@echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
-
-dirhtml:
-	$(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
-	@echo
-	@echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
-
-singlehtml:
-	$(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
-	@echo
-	@echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
-
-pickle:
-	$(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
-	@echo
-	@echo "Build finished; now you can process the pickle files."
-
-json:
-	$(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
-	@echo
-	@echo "Build finished; now you can process the JSON files."
-
-htmlhelp:
-	$(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
-	@echo
-	@echo "Build finished; now you can run HTML Help Workshop with the" \
-	      ".hhp project file in $(BUILDDIR)/htmlhelp."
-
-qthelp:
-	$(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
-	@echo
-	@echo "Build finished; now you can run "qcollectiongenerator" with the" \
-	      ".qhcp project file in $(BUILDDIR)/qthelp, like this:"
-	@echo "# qcollectiongenerator $(BUILDDIR)/qthelp/VyOS.qhcp"
-	@echo "To view the help file:"
-	@echo "# assistant -collectionFile $(BUILDDIR)/qthelp/VyOS.qhc"
-
-devhelp:
-	$(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
-	@echo
-	@echo "Build finished."
-	@echo "To view the help file:"
-	@echo "# mkdir -p $$HOME/.local/share/devhelp/VyOS"
-	@echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/VyOS"
-	@echo "# devhelp"
-
-epub:
-	$(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
-	@echo
-	@echo "Build finished. The epub file is in $(BUILDDIR)/epub."
-
-latex:
-	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-	@echo
-	@echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
-	@echo "Run \`make' in that directory to run these through (pdf)latex" \
-	      "(use \`make latexpdf' here to do that automatically)."
-
-latexpdf:
-	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-	@echo "Running LaTeX files through pdflatex..."
-	$(MAKE) -C $(BUILDDIR)/latex all-pdf
-	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
-
-latexpdfja:
-	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-	@echo "Running LaTeX files through platex and dvipdfmx..."
-	$(MAKE) -C $(BUILDDIR)/latex all-pdf-ja
-	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
-
-text:
-	$(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
-	@echo
-	@echo "Build finished. The text files are in $(BUILDDIR)/text."
-
-man:
-	$(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
-	@echo
-	@echo "Build finished. The manual pages are in $(BUILDDIR)/man."
-
-texinfo:
-	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
-	@echo
-	@echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
-	@echo "Run \`make' in that directory to run these through makeinfo" \
-	      "(use \`make info' here to do that automatically)."
-
-info:
-	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
-	@echo "Running Texinfo files through makeinfo..."
-	make -C $(BUILDDIR)/texinfo info
-	@echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
-
-gettext:
-	$(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
-	@echo
-	@echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
-
-changes:
-	$(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
-	@echo
-	@echo "The overview file is in $(BUILDDIR)/changes."
-
-linkcheck:
-	$(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
-	@echo
-	@echo "Link check complete; look for any errors in the above output " \
-	      "or in $(BUILDDIR)/linkcheck/output.txt."
-
-doctest:
-	$(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
-	@echo "Testing of doctests in the sources finished, look at the " \
-	      "results in $(BUILDDIR)/doctest/output.txt."
-
-xml:
-	$(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml
-	@echo
-	@echo "Build finished. The XML files are in $(BUILDDIR)/xml."
-
-pseudoxml:
-	$(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml
-	@echo
-	@echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml."
diff --git a/sphinx/source/.gitignore b/sphinx/source/.gitignore
deleted file mode 100644
index 30d85567b..000000000
--- a/sphinx/source/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-*.rst
diff --git a/sphinx/source/conf.py b/sphinx/source/conf.py
deleted file mode 100644
index 3447259b3..000000000
--- a/sphinx/source/conf.py
+++ /dev/null
@@ -1,261 +0,0 @@
-#!/usr/bin/env python3
-# -*- coding: utf-8 -*-
-#
-# VyOS documentation build configuration file, created by
-# sphinx-quickstart on Wed Jun 20 01:14:27 2018.
-#
-# This file is execfile()d with the current directory set to its
-# containing dir.
-#
-# Note that not all possible configuration values are present in this
-# autogenerated file.
-#
-# All configuration values have a default; values that are commented out
-# serve to show the default.
-
-import sys
-import os
-
-# If extensions (or modules to document with autodoc) are in another directory,
-# add these directories to sys.path here. If the directory is relative to the
-# documentation root, use os.path.abspath to make it absolute, like shown here.
-#sys.path.insert(0, os.path.abspath('.'))
-
-# -- General configuration ------------------------------------------------
-
-# If your documentation needs a minimal Sphinx version, state it here.
-#needs_sphinx = '1.0'
-
-# Add any Sphinx extension module names here, as strings. They can be
-# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
-# ones.
-extensions = [
-    'sphinx.ext.autodoc',
-]
-
-# Add any paths that contain templates here, relative to this directory.
-templates_path = ['_templates']
-
-# The suffix of source filenames.
-source_suffix = '.rst'
-
-# The encoding of source files.
-#source_encoding = 'utf-8-sig'
-
-# The master toctree document.
-master_doc = 'index'
-
-# General information about the project.
-project = 'VyOS'
-copyright = '2018, VyOS maintainers and contributors'
-
-# The version info for the project you're documenting, acts as replacement for
-# |version| and |release|, also used in various other places throughout the
-# built documents.
-#
-# The short X.Y version.
-version = '1.2.0'
-# The full version, including alpha/beta/rc tags.
-release = '1.2.0'
-
-# The language for content autogenerated by Sphinx. Refer to documentation
-# for a list of supported languages.
-#language = None
-
-# There are two options for replacing |today|: either, you set today to some
-# non-false value, then it is used:
-#today = ''
-# Else, today_fmt is used as the format for a strftime call.
-#today_fmt = '%B %d, %Y'
-
-# List of patterns, relative to source directory, that match files and
-# directories to ignore when looking for source files.
-exclude_patterns = []
-
-# The reST default role (used for this markup: `text`) to use for all
-# documents.
-#default_role = None
-
-# If true, '()' will be appended to :func: etc. cross-reference text.
-#add_function_parentheses = True
-
-# If true, the current module name will be prepended to all description
-# unit titles (such as .. function::).
-#add_module_names = True
-
-# If true, sectionauthor and moduleauthor directives will be shown in the
-# output. They are ignored by default.
-#show_authors = False
-
-# The name of the Pygments (syntax highlighting) style to use.
-pygments_style = 'sphinx'
-
-# A list of ignored prefixes for module index sorting.
-#modindex_common_prefix = []
-
-# If true, keep warnings as "system message" paragraphs in the built documents.
-#keep_warnings = False
-
-
-# -- Options for HTML output ----------------------------------------------
-
-# The theme to use for HTML and HTML Help pages.  See the documentation for
-# a list of builtin themes.
-html_theme = 'default'
-
-# Theme options are theme-specific and customize the look and feel of a theme
-# further.  For a list of options available for each theme, see the
-# documentation.
-#html_theme_options = {}
-
-# Add any paths that contain custom themes here, relative to this directory.
-#html_theme_path = []
-
-# The name for this set of Sphinx documents.  If None, it defaults to
-# "<project> v<release> documentation".
-#html_title = None
-
-# A shorter title for the navigation bar.  Default is the same as html_title.
-#html_short_title = None
-
-# The name of an image file (relative to this directory) to place at the top
-# of the sidebar.
-#html_logo = None
-
-# The name of an image file (within the static path) to use as favicon of the
-# docs.  This file should be a Windows icon file (.ico) being 16x16 or 32x32
-# pixels large.
-#html_favicon = None
-
-# Add any paths that contain custom static files (such as style sheets) here,
-# relative to this directory. They are copied after the builtin static files,
-# so a file named "default.css" will overwrite the builtin "default.css".
-html_static_path = ['_static']
-
-# Add any extra paths that contain custom files (such as robots.txt or
-# .htaccess) here, relative to this directory. These files are copied
-# directly to the root of the documentation.
-#html_extra_path = []
-
-# If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
-# using the given strftime format.
-#html_last_updated_fmt = '%b %d, %Y'
-
-# If true, SmartyPants will be used to convert quotes and dashes to
-# typographically correct entities.
-#html_use_smartypants = True
-
-# Custom sidebar templates, maps document names to template names.
-#html_sidebars = {}
-
-# Additional templates that should be rendered to pages, maps page names to
-# template names.
-#html_additional_pages = {}
-
-# If false, no module index is generated.
-#html_domain_indices = True
-
-# If false, no index is generated.
-#html_use_index = True
-
-# If true, the index is split into individual pages for each letter.
-#html_split_index = False
-
-# If true, links to the reST sources are added to the pages.
-#html_show_sourcelink = True
-
-# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
-#html_show_sphinx = True
-
-# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
-#html_show_copyright = True
-
-# If true, an OpenSearch description file will be output, and all pages will
-# contain a <link> tag referring to it.  The value of this option must be the
-# base URL from which the finished HTML is served.
-#html_use_opensearch = ''
-
-# This is the file name suffix for HTML files (e.g. ".xhtml").
-#html_file_suffix = None
-
-# Output file base name for HTML help builder.
-htmlhelp_basename = 'VyOSdoc'
-
-
-# -- Options for LaTeX output ---------------------------------------------
-
-latex_elements = {
-# The paper size ('letterpaper' or 'a4paper').
-#'papersize': 'letterpaper',
-
-# The font size ('10pt', '11pt' or '12pt').
-#'pointsize': '10pt',
-
-# Additional stuff for the LaTeX preamble.
-#'preamble': '',
-}
-
-# Grouping the document tree into LaTeX files. List of tuples
-# (source start file, target name, title,
-#  author, documentclass [howto, manual, or own class]).
-latex_documents = [
-  ('index', 'VyOS.tex', 'VyOS Documentation',
-   'VyOS maintainers and contributors', 'manual'),
-]
-
-# The name of an image file (relative to this directory) to place at the top of
-# the title page.
-#latex_logo = None
-
-# For "manual" documents, if this is true, then toplevel headings are parts,
-# not chapters.
-#latex_use_parts = False
-
-# If true, show page references after internal links.
-#latex_show_pagerefs = False
-
-# If true, show URL addresses after external links.
-#latex_show_urls = False
-
-# Documents to append as an appendix to all manuals.
-#latex_appendices = []
-
-# If false, no module index is generated.
-#latex_domain_indices = True
-
-
-# -- Options for manual page output ---------------------------------------
-
-# One entry per manual page. List of tuples
-# (source start file, name, description, authors, manual section).
-man_pages = [
-    ('index', 'vyos', 'VyOS Documentation',
-     ['VyOS maintainers and contributors'], 1)
-]
-
-# If true, show URL addresses after external links.
-#man_show_urls = False
-
-
-# -- Options for Texinfo output -------------------------------------------
-
-# Grouping the document tree into Texinfo files. List of tuples
-# (source start file, target name, title, author,
-#  dir menu entry, description, category)
-texinfo_documents = [
-  ('index', 'VyOS', 'VyOS Documentation',
-   'VyOS maintainers and contributors', 'VyOS', 'One line description of project.',
-   'Miscellaneous'),
-]
-
-# Documents to append as an appendix to all manuals.
-#texinfo_appendices = []
-
-# If false, no module index is generated.
-#texinfo_domain_indices = True
-
-# How to display URL addresses: 'footnote', 'no', or 'inline'.
-#texinfo_show_urls = 'footnote'
-
-# If true, do not generate a @detailmenu in the "Top" node's menu.
-#texinfo_no_detailmenu = False
diff --git a/sphinx/source/index.rst b/sphinx/source/index.rst
deleted file mode 100644
index c31cac4e5..000000000
--- a/sphinx/source/index.rst
+++ /dev/null
@@ -1,22 +0,0 @@
-.. VyOS documentation master file, created by
-   sphinx-quickstart on Wed Jun 20 01:14:27 2018.
-   You can adapt this file completely to your liking, but it should at least
-   contain the root `toctree` directive.
-
-Welcome to VyOS's documentation!
-================================
-
-Contents:
-
-.. toctree::
-   :maxdepth: 2
-
-
-
-Indices and tables
-==================
-
-* :ref:`genindex`
-* :ref:`modindex`
-* :ref:`search`
-