T4630: can not use same source-interface for macsec and pseudo-ethernet

A macsec interface requires a dedicated source interface, it can not be
shared with another macsec or a pseudo-ethernet interface.

set interfaces macsec macsec10 address '192.168.2.1/30'
set interfaces macsec macsec10 security cipher 'gcm-aes-256'
set interfaces macsec macsec10 security encrypt
set interfaces macsec macsec10 security mka cak '232e44b7fda6f8e2d88a07bf78a7aff4232e44b7fda6f8e2d88a07bf78a7aff4'
set interfaces macsec macsec10 security mka ckn '09924585a6f3010208cf5222ef24c821405b0e34f4b4f63b1f0ced474b9bb6e6'
set interfaces macsec macsec10 source-interface 'eth1'
commit

set interfaces pseudo-ethernet peth0 source-interface eth1
commit

Reuslts in

FileNotFoundError: [Errno 2] failed to run command: ip link add peth0 link eth1 type macvlan mode private
returned:
exit code: 2

noteworthy:
cmd 'ip link add peth0 link eth1 type macvlan mode private'
returned (out):

returned (err):
RTNETLINK answers: Device or resource busy

[[interfaces pseudo-ethernet peth0]] failed
Commit failed

1 files changed, 1 insertions, 7 deletions

diff --git a/src/conf_mode/interfaces-macsec.py b/src/conf_mode/interfaces-macsec.py
index 870049a88..649ea8d50 100755
--- a/src/conf_mode/interfaces-macsec.py
+++ b/src/conf_mode/interfaces-macsec.py
@@ -67,7 +67,7 @@ def get_config(config=None):
         macsec.update({'shutdown_required': {}})
 
     if 'source_interface' in macsec:
-        tmp = is_source_interface(conf, macsec['source_interface'], 'macsec')
+        tmp = is_source_interface(conf, macsec['source_interface'], ['macsec', 'pseudo-ethernet'])
         if tmp and tmp != ifname: macsec.update({'is_source_interface' : tmp})
 
     return macsec
@@ -102,12 +102,6 @@ def verify(macsec):
             # gcm-aes-128 requires a 128bit long key - 64 characters (string) = 32byte = 256bit
             raise ConfigError('gcm-aes-128 requires a 256bit long key!')
 
-    if 'is_source_interface' in macsec:
-        tmp = macsec['is_source_interface']
-        src_ifname = macsec['source_interface']
-        raise ConfigError(f'Can not use source-interface "{src_ifname}", it already ' \
-                          f'belongs to interface "{tmp}"!')
-
     if 'source_interface' in macsec:
         # MACsec adds a 40 byte overhead (32 byte MACsec + 8 bytes VLAN 802.1ad
         # and 802.1q) - we need to check the underlaying MTU if our configured