service-pppoe: T1878: option pppoe single-session implementation

1 files changed, 383 insertions, 330 deletions

diff --git a/src/conf_mode/service-pppoe.py b/src/conf_mode/service-pppoe.py
index 6aec9be98..b92b7ab17 100755
--- a/src/conf_mode/service-pppoe.py
+++ b/src/conf_mode/service-pppoe.py
@@ -32,15 +32,16 @@ pidfile = r'/var/run/accel_pppoe.pid'
 pppoe_cnf_dir = r'/etc/accel-ppp/pppoe'
 chap_secrets = pppoe_cnf_dir + '/chap-secrets'
 pppoe_conf = pppoe_cnf_dir + '/pppoe.config'
-# accel-pppd -d -c /etc/accel-ppp/pppoe/pppoe.config -p /var/run/accel_pppoe.pid
+# accel-pppd -d -c /etc/accel-ppp/pppoe/pppoe.config -p
+# /var/run/accel_pppoe.pid
 
-### config path creation
+# config path creation
 if not os.path.exists(pppoe_cnf_dir):
-  os.makedirs(pppoe_cnf_dir)
-  sl.syslog(sl.LOG_NOTICE, pppoe_cnf_dir  + " created")
+    os.makedirs(pppoe_cnf_dir)
+    sl.syslog(sl.LOG_NOTICE, pppoe_cnf_dir + " created")
 
 pppoe_config = '''
-### generated by accel_pppoe.py ### 
+### generated by accel_pppoe.py ###
 [modules]
 log_syslog
 pppoe
@@ -182,7 +183,9 @@ vendor={{authentication['radiusopt']['shaper']['vendor']}}
 [ppp]
 verbose=1
 check-ip=1
-single-session=replace
+{% if not sesscrtl == 'disable' %}
+single-session={{sesscrtl}}
+{% endif -%}
 {% if ppp_options['ccp'] %}
 ccp=1
 {% endif %}
@@ -264,7 +267,7 @@ timeout={{limits['timeout']}}
 tcp=127.0.0.1:2001
 '''
 
-### pppoe chap secrets
+# pppoe chap secrets
 chap_secrets_conf = '''
 # username  server  password  acceptable local IP addresses   shaper
 {% for user in authentication['local-users'] %}
@@ -278,351 +281,401 @@ chap_secrets_conf = '''
 {% endif %}
 {% endfor %}
 '''
-###
+#
 # inline helper functions
-###
+#
 # depending on hw and threads, daemon needs a little to start
 # if it takes longer than 100 * 0.5 secs, exception is being raised
-# not sure if that's the best way to check it, but it worked so far quite well 
-###
+# not sure if that's the best way to check it, but it worked so far quite well
+#
+
+
 def chk_con():
-  cnt = 0
-  s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
-  while True:
-    try:
-      s.connect(("127.0.0.1", 2001))
-      break
-    except ConnectionRefusedError:
-      time.sleep(0.5)
-      cnt +=1
-      if cnt == 100:
-        raise("failed to start pppoe server")
-        break
-
-### chap_secrets file if auth mode local
+    cnt = 0
+    s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
+    while True:
+        try:
+            s.connect(("127.0.0.1", 2001))
+            break
+        except ConnectionRefusedError:
+            time.sleep(0.5)
+            cnt += 1
+            if cnt == 100:
+                raise("failed to start pppoe server")
+                break
+
+# chap_secrets file if auth mode local
+
+
 def write_chap_secrets(c):
-  tmpl = jinja2.Template(chap_secrets_conf, trim_blocks=True)
-  chap_secrets_txt = tmpl.render(c)
-  old_umask = os.umask(0o077)
-  open(chap_secrets,'w').write(chap_secrets_txt)
-  os.umask(old_umask)
-  sl.syslog(sl.LOG_NOTICE, chap_secrets + ' written')
+    tmpl = jinja2.Template(chap_secrets_conf, trim_blocks=True)
+    chap_secrets_txt = tmpl.render(c)
+    old_umask = os.umask(0o077)
+    open(chap_secrets, 'w').write(chap_secrets_txt)
+    os.umask(old_umask)
+    sl.syslog(sl.LOG_NOTICE, chap_secrets + ' written')
+
 
 def accel_cmd(cmd=''):
-  if not cmd:
-    return None
-  try:
-    ret = subprocess.check_output(['/usr/bin/accel-cmd',cmd]).decode().strip()
-    return ret
-  except:
-    return 1
+    if not cmd:
+        return None
+    try:
+        ret = subprocess.check_output(
+            ['/usr/bin/accel-cmd', cmd]).decode().strip()
+        return ret
+    except:
+        return 1
 
-#### check ig local-ip is in client pool subnet
+# check ig local-ip is in client pool subnet
 
 
-### 
+#
 # inline helper functions end
-###
+#
 
 def get_config():
-  c = Config()
-  if not c.exists('service pppoe-server'):
-    return None
-
-  config_data = {
-    'concentrator'      : 'vyos-ac',
-    'authentication'    : {
-      'local-users'     : {
+    c = Config()
+    if not c.exists('service pppoe-server'):
+        return None
+
+    config_data = {
+        'concentrator': 'vyos-ac',
+      'authentication': {
+        'local-users': {
+        },
+          'mode': 'local',
+        'radiussrv': {},
+        'radiusopt': {}
       },
-      'mode'            : 'local',
-      'radiussrv'       : {},
-      'radiusopt'       : {}
-    },
-    'client_ip_pool'    : '',
-    'client_ip_subnets' : [],
-    'client_ipv6_pool'  : {},
-    'interface'         : {},
-    'ppp_gw'            : '',
-    'svc_name'          : '',
-    'dns'               : [],
-    'dnsv6'             : [],
-    'wins'              : [],
-    'mtu'               : '1492',
-    'ppp_options'       : {},
-    'limits'            : {},
-    'snmp'              : 'disable'
-  }
-
-  c.set_level('service pppoe-server')
-  ### general options 
-  if c.exists('access-concentrator'):
-    config_data['concentrator'] = c.return_value('access-concentrator')
-  if c.exists('service-name'):
-    config_data['svc_name'] = c.return_value('service-name')
-  if c.exists('interface'):
-    for intfc in c.list_nodes('interface'):
-      config_data['interface'][intfc] = {'vlans' : []}
-      if c.exists('interface ' + intfc + ' vlan-id'):
-        config_data['interface'][intfc]['vlans'] += c.return_values('interface ' + intfc + ' vlan-id')
-      if c.exists('interface ' + intfc + ' vlan-range'):
-        config_data['interface'][intfc]['vlans'] +=c.return_values('interface ' + intfc + ' vlan-range')
-  if c.exists('local-ip'):
-    config_data['ppp_gw'] = c.return_value('local-ip')
-  if c.exists('dns-servers'):
-    if c.return_value('dns-servers server-1'):
-      config_data['dns'].append(c.return_value('dns-servers server-1'))
-    if c.return_value('dns-servers server-2'):
-      config_data['dns'].append(c.return_value('dns-servers server-2'))
-  if c.exists('dnsv6-servers'):
-    if c.return_value('dnsv6-servers server-1'):
-      config_data['dnsv6'].append(c.return_value('dnsv6-servers server-1'))
-    if c.return_value('dnsv6-servers server-2'):
-      config_data['dnsv6'].append(c.return_value('dnsv6-servers server-2'))
-    if c.return_value('dnsv6-servers server-3'):
-      config_data['dnsv6'].append(c.return_value('dnsv6-servers server-3'))
-  if c.exists('wins-servers'):
-    if c.return_value('wins-servers server-1'):
-      config_data['wins'].append(c.return_value('wins-servers server-1'))
-    if c.return_value('wins-servers server-2'):
-      config_data['wins'].append(c.return_value('wins-servers server-2'))
-  if c.exists('client-ip-pool'):
-    if c.exists('client-ip-pool start'):
-      config_data['client_ip_pool'] = c.return_value('client-ip-pool start') 
-      if c.exists('client-ip-pool stop'):
-        config_data['client_ip_pool'] += '-' + re.search('[0-9]+$', c.return_value('client-ip-pool stop')).group(0)
-      else:
-        raise ConfigError('client ip pool stop required')
-    if c.exists('client-ip-pool subnet'):
-      config_data['client_ip_subnets'] = c.return_values('client-ip-pool subnet')
-  if c.exists('client-ipv6-pool prefix'):
-    config_data['client_ipv6_pool']['prefix'] = c.return_values('client-ipv6-pool prefix')
-    if c.exists('client-ipv6-pool delegate-prefix'):
-      config_data['client_ipv6_pool']['delegate-prefix'] = c.return_values('client-ipv6-pool delegate-prefix')
-  if c.exists('limits'):
-    if c.exists('limits burst'):
-      config_data['limits']['burst'] = str(c.return_value('limits burst'))
-    if c.exists('limits timeout'):
-      config_data['limits']['timeout'] = str(c.return_value('limits timeout'))
-    if c.exists('limits connection-limit'):
-      config_data['limits']['conn-limit'] = str(c.return_value('limits connection-limit'))
-  if c.exists('snmp'):
-    config_data['snmp'] = 'enable'
-  if c.exists('snmp master-agent'):
-    config_data['snmp'] = 'enable-ma'
-
-  #### authentication mode local
-  if not c.exists('authentication mode'):
-    raise ConfigError('pppoe-server authentication mode required')
-    
-  if c.exists('authentication mode local'):
-    if c.exists('authentication local-users username'):
-      for usr in c.list_nodes('authentication local-users username'):
-        config_data['authentication']['local-users'].update(
-          {
-            usr : {
-              'passwd'    : None,
-              'state'     : 'enabled',
-              'ip'        : '*',
-              'upload'    : None,
-              'download'  : None
-            }
-          }
-        )
-        if c.exists('authentication local-users username ' + usr + ' password'):
-          config_data['authentication']['local-users'][usr]['passwd'] = c.return_value('authentication local-users username ' + usr + ' password')
-        if c.exists('authentication local-users username ' + usr + ' disable'):
-          config_data['authentication']['local-users'][usr]['state'] = 'disable'
-        if c.exists('authentication local-users username ' + usr + ' static-ip'):
-          config_data['authentication']['local-users'][usr]['ip'] = c.return_value('authentication local-users username ' + usr + ' static-ip')
-        if c.exists('authentication local-users username ' + usr + ' rate-limit download'):
-          config_data['authentication']['local-users'][usr]['download'] = c.return_value('authentication local-users username ' + usr + ' rate-limit download')
-        if c.exists('authentication local-users username ' + usr + ' rate-limit upload'):
-          config_data['authentication']['local-users'][usr]['upload'] = c.return_value('authentication local-users username ' + usr + ' rate-limit upload')
-
-    ### authentication mode radius servers and settings
-
-  if c.exists('authentication mode radius'):
-    config_data['authentication']['mode'] = 'radius'
-    rsrvs = c.list_nodes('authentication radius-server')
-    for rsrv in rsrvs:
-      if c.return_value('authentication radius-server ' + rsrv + ' fail-time') == None:
-        ftime = '0'
-      else:
-        ftime = str(c.return_value('authentication radius-server ' + rsrv + ' fail-time'))
-      if c.return_value('authentication radius-server ' + rsrv + ' req-limit') == None:
-        reql = '0'
-      else:
-        reql = str(c.return_value('authentication radius-server ' + rsrv + ' req-limit'))
-      config_data['authentication']['radiussrv'].update(
-        {
-          rsrv  : {
-            'secret'  : c.return_value('authentication radius-server ' + rsrv + ' secret'),
-            'fail-time' : ftime,
-            'req-limit' : reql 
-            }
-        }
-      )
-
-    #### advanced radius-setting
-    if c.exists('authentication radius-settings'):
-      if c.exists('authentication radius-settings acct-timeout'):
-        config_data['authentication']['radiusopt']['acct-timeout'] = c.return_value('authentication radius-settings acct-timeout')
-      if c.exists('authentication radius-settings max-try'):
-        config_data['authentication']['radiusopt']['max-try'] = c.return_value('authentication radius-settings max-try')
-      if c.exists('authentication radius-settings timeout'):
-        config_data['authentication']['radiusopt']['timeout'] = c.return_value('authentication radius-settings timeout')
-      if c.exists('authentication radius-settings nas-identifier'):
-        config_data['authentication']['radiusopt']['nas-id'] = c.return_value('authentication radius-settings nas-identifier')
-      if c.exists('authentication radius-settings nas-ip-address'):
-        config_data['authentication']['radiusopt']['nas-ip'] = c.return_value('authentication radius-settings nas-ip-address')
-      if c.exists('authentication radius-settings dae-server'):
-        config_data['authentication']['radiusopt'].update(
-          {
-            'dae-srv' : {
-              'ip-addr' : c.return_value('authentication radius-settings dae-server ip-address'),
-              'port'    : c.return_value('authentication radius-settings dae-server port'),
-              'secret'  : str(c.return_value('authentication radius-settings dae-server secret'))
-            }
-          }
-        )
-      #### filter-id is the internal accel default if attribute is empty
-      #### set here as default for visibility which may change in the future
-      if c.exists('authentication radius-settings rate-limit enable'):
-        if not c.exists('authentication radius-settings rate-limit attribute'):
-          config_data['authentication']['radiusopt']['shaper'] = {
-            'attr'  : 'Filter-Id'
-          }
-        else:
-          config_data['authentication']['radiusopt']['shaper'] = {
-          'attr'  : c.return_value('authentication radius-settings rate-limit attribute')
-          }
-        if c.exists('authentication radius-settings rate-limit vendor'):
-          config_data['authentication']['radiusopt']['shaper']['vendor'] = c.return_value('authentication radius-settings rate-limit vendor')
-
-  if c.exists('mtu'):
-    config_data['mtu'] = c.return_value('mtu')
-
-  ### ppp_options
-  ppp_options = {}
-  if c.exists('ppp-options'):
-    if c.exists('ppp-options ccp'):
-      ppp_options['ccp'] = c.return_value('ppp-options ccp')
-    if c.exists('ppp-options min-mtu'):
-      ppp_options['min-mtu'] = c.return_value('ppp-options min-mtu')
-    if c.exists('ppp-options mru'):
-      ppp_options['mru'] = c.return_value('ppp-options mru')
-    if c.exists('ppp-options mppe deny'):
-      ppp_options['mppe'] = 'deny'
-    if c.exists('ppp-options mppe require'):
-      ppp_options['mppe'] = 'requre'
-    if c.exists('ppp-options mppe prefer'):
-      ppp_options['mppe'] = 'prefer'
-    if c.exists('ppp-options lcp-echo-failure'):
-      ppp_options['lcp-echo-failure'] = c.return_value('ppp-options lcp-echo-failure')
-    if c.exists('ppp-options lcp-echo-interval'):
-      ppp_options['lcp-echo-interval'] = c.return_value('ppp-options lcp-echo-interval')
-    if c.exists('ppp-options ipv4'):
-      ppp_options['ipv4'] = c.return_value('ppp-options ipv4')
-    if c.exists('ppp-options ipv6'):
-      ppp_options['ipv6'] = c.return_value('ppp-options ipv6')
-    if c.exists('ppp-options ipv6-accept-peer-intf-id'):
-      ppp_options['ipv6-accept-peer-intf-id']= 1
-    if c.exists('ppp-options ipv6-intf-id'):
-      ppp_options['ipv6-intf-id'] = c.return_value('ppp-options ipv6-intf-id') 
-    if c.exists('ppp-options ipv6-peer-intf-id'):
-      ppp_options['ipv6-peer-intf-id'] = c.return_value('ppp-options ipv6-peer-intf-id')
-    if c.exists('ppp-options lcp-echo-timeout'):
-      ppp_options['lcp-echo-timeout'] = c.return_value('ppp-options lcp-echo-timeout')
-
-  if len(ppp_options) !=0:
-    config_data['ppp_options'] = ppp_options
-
-  return config_data
+      'client_ip_pool': '',
+      'client_ip_subnets': [],
+      'client_ipv6_pool': {},
+      'interface': {},
+      'ppp_gw': '',
+      'svc_name': '',
+      'dns': [],
+      'dnsv6': [],
+      'wins': [],
+      'mtu': '1492',
+      'ppp_options': {},
+      'limits': {},
+      'snmp': 'disable',
+      'sesscrtl': 'replace'
+    }
+
+    c.set_level('service pppoe-server')
+    # general options
+    if c.exists('access-concentrator'):
+        config_data['concentrator'] = c.return_value('access-concentrator')
+    if c.exists('service-name'):
+        config_data['svc_name'] = c.return_value('service-name')
+    if c.exists('interface'):
+        for intfc in c.list_nodes('interface'):
+            config_data['interface'][intfc] = {'vlans': []}
+            if c.exists('interface ' + intfc + ' vlan-id'):
+                config_data['interface'][intfc]['vlans'] += c.return_values(
+                    'interface ' + intfc + ' vlan-id')
+            if c.exists('interface ' + intfc + ' vlan-range'):
+                config_data['interface'][intfc]['vlans'] += c.return_values(
+                    'interface ' + intfc + ' vlan-range')
+    if c.exists('local-ip'):
+        config_data['ppp_gw'] = c.return_value('local-ip')
+    if c.exists('dns-servers'):
+        if c.return_value('dns-servers server-1'):
+            config_data['dns'].append(c.return_value('dns-servers server-1'))
+        if c.return_value('dns-servers server-2'):
+            config_data['dns'].append(c.return_value('dns-servers server-2'))
+    if c.exists('dnsv6-servers'):
+        if c.return_value('dnsv6-servers server-1'):
+            config_data['dnsv6'].append(
+                c.return_value('dnsv6-servers server-1'))
+        if c.return_value('dnsv6-servers server-2'):
+            config_data['dnsv6'].append(
+                c.return_value('dnsv6-servers server-2'))
+        if c.return_value('dnsv6-servers server-3'):
+            config_data['dnsv6'].append(
+                c.return_value('dnsv6-servers server-3'))
+    if c.exists('wins-servers'):
+        if c.return_value('wins-servers server-1'):
+            config_data['wins'].append(c.return_value('wins-servers server-1'))
+        if c.return_value('wins-servers server-2'):
+            config_data['wins'].append(c.return_value('wins-servers server-2'))
+    if c.exists('client-ip-pool'):
+        if c.exists('client-ip-pool start'):
+            config_data['client_ip_pool'] = c.return_value(
+                'client-ip-pool start')
+            if c.exists('client-ip-pool stop'):
+                config_data['client_ip_pool'] += '-' + re.search(
+                    '[0-9]+$', c.return_value('client-ip-pool stop')).group(0)
+            else:
+                raise ConfigError('client ip pool stop required')
+        if c.exists('client-ip-pool subnet'):
+            config_data['client_ip_subnets'] = c.return_values(
+                'client-ip-pool subnet')
+    if c.exists('client-ipv6-pool prefix'):
+        config_data['client_ipv6_pool'][
+            'prefix'] = c.return_values('client-ipv6-pool prefix')
+        if c.exists('client-ipv6-pool delegate-prefix'):
+            config_data['client_ipv6_pool']['delegate-prefix'] = c.return_values(
+                'client-ipv6-pool delegate-prefix')
+    if c.exists('limits'):
+        if c.exists('limits burst'):
+            config_data['limits']['burst'] = str(
+                c.return_value('limits burst'))
+        if c.exists('limits timeout'):
+            config_data['limits']['timeout'] = str(
+                c.return_value('limits timeout'))
+        if c.exists('limits connection-limit'):
+            config_data['limits']['conn-limit'] = str(
+                c.return_value('limits connection-limit'))
+    if c.exists('snmp'):
+        config_data['snmp'] = 'enable'
+    if c.exists('snmp master-agent'):
+        config_data['snmp'] = 'enable-ma'
+
+    # authentication mode local
+    if not c.exists('authentication mode'):
+        raise ConfigError('pppoe-server authentication mode required')
+
+    if c.exists('authentication mode local'):
+        if c.exists('authentication local-users username'):
+            for usr in c.list_nodes('authentication local-users username'):
+                config_data['authentication']['local-users'].update(
+                    {
+                        usr: {
+                            'passwd': None,
+                            'state': 'enabled',
+                            'ip': '*',
+                            'upload': None,
+                            'download': None
+                        }
+                    }
+                )
+                if c.exists('authentication local-users username ' + usr + ' password'):
+                    config_data['authentication']['local-users'][usr]['passwd'] = c.return_value(
+                        'authentication local-users username ' + usr + ' password')
+                if c.exists('authentication local-users username ' + usr + ' disable'):
+                    config_data['authentication'][
+                        'local-users'][usr]['state'] = 'disable'
+                if c.exists('authentication local-users username ' + usr + ' static-ip'):
+                    config_data['authentication']['local-users'][usr]['ip'] = c.return_value(
+                        'authentication local-users username ' + usr + ' static-ip')
+                if c.exists('authentication local-users username ' + usr + ' rate-limit download'):
+                    config_data['authentication']['local-users'][usr]['download'] = c.return_value(
+                        'authentication local-users username ' + usr + ' rate-limit download')
+                if c.exists('authentication local-users username ' + usr + ' rate-limit upload'):
+                    config_data['authentication']['local-users'][usr]['upload'] = c.return_value(
+                        'authentication local-users username ' + usr + ' rate-limit upload')
+
+        # authentication mode radius servers and settings
+
+    if c.exists('authentication mode radius'):
+        config_data['authentication']['mode'] = 'radius'
+        rsrvs = c.list_nodes('authentication radius-server')
+        for rsrv in rsrvs:
+            if c.return_value('authentication radius-server ' + rsrv + ' fail-time') == None:
+                ftime = '0'
+            else:
+                ftime = str(
+                    c.return_value('authentication radius-server ' + rsrv + ' fail-time'))
+            if c.return_value('authentication radius-server ' + rsrv + ' req-limit') == None:
+                reql = '0'
+            else:
+                reql = str(
+                    c.return_value('authentication radius-server ' + rsrv + ' req-limit'))
+            config_data['authentication']['radiussrv'].update(
+                {
+                    rsrv: {
+                        'secret': c.return_value('authentication radius-server ' + rsrv + ' secret'),
+                        'fail-time': ftime,
+                        'req-limit': reql
+                    }
+                }
+            )
+
+        # advanced radius-setting
+        if c.exists('authentication radius-settings'):
+            if c.exists('authentication radius-settings acct-timeout'):
+                config_data['authentication']['radiusopt']['acct-timeout'] = c.return_value(
+                    'authentication radius-settings acct-timeout')
+            if c.exists('authentication radius-settings max-try'):
+                config_data['authentication']['radiusopt'][
+                    'max-try'] = c.return_value('authentication radius-settings max-try')
+            if c.exists('authentication radius-settings timeout'):
+                config_data['authentication']['radiusopt'][
+                    'timeout'] = c.return_value('authentication radius-settings timeout')
+            if c.exists('authentication radius-settings nas-identifier'):
+                config_data['authentication']['radiusopt']['nas-id'] = c.return_value(
+                    'authentication radius-settings nas-identifier')
+            if c.exists('authentication radius-settings nas-ip-address'):
+                config_data['authentication']['radiusopt']['nas-ip'] = c.return_value(
+                    'authentication radius-settings nas-ip-address')
+            if c.exists('authentication radius-settings dae-server'):
+                config_data['authentication']['radiusopt'].update(
+                    {
+                        'dae-srv': {
+                            'ip-addr': c.return_value('authentication radius-settings dae-server ip-address'),
+                            'port': c.return_value('authentication radius-settings dae-server port'),
+                            'secret': str(c.return_value('authentication radius-settings dae-server secret'))
+                        }
+                    }
+                )
+            # filter-id is the internal accel default if attribute is empty
+            # set here as default for visibility which may change in the future
+            if c.exists('authentication radius-settings rate-limit enable'):
+                if not c.exists('authentication radius-settings rate-limit attribute'):
+                    config_data['authentication']['radiusopt']['shaper'] = {
+                        'attr': 'Filter-Id'
+                    }
+                else:
+                    config_data['authentication']['radiusopt']['shaper'] = {
+                        'attr': c.return_value('authentication radius-settings rate-limit attribute')
+                    }
+                if c.exists('authentication radius-settings rate-limit vendor'):
+                    config_data['authentication']['radiusopt']['shaper'][
+                        'vendor'] = c.return_value('authentication radius-settings rate-limit vendor')
+
+    if c.exists('mtu'):
+        config_data['mtu'] = c.return_value('mtu')
+
+    # ppp_options
+    ppp_options = {}
+    if c.exists('ppp-options'):
+        if c.exists('ppp-options ccp'):
+            ppp_options['ccp'] = c.return_value('ppp-options ccp')
+        if c.exists('ppp-options min-mtu'):
+            ppp_options['min-mtu'] = c.return_value('ppp-options min-mtu')
+        if c.exists('ppp-options mru'):
+            ppp_options['mru'] = c.return_value('ppp-options mru')
+        if c.exists('ppp-options mppe deny'):
+            ppp_options['mppe'] = 'deny'
+        if c.exists('ppp-options mppe require'):
+            ppp_options['mppe'] = 'requre'
+        if c.exists('ppp-options mppe prefer'):
+            ppp_options['mppe'] = 'prefer'
+        if c.exists('ppp-options lcp-echo-failure'):
+            ppp_options['lcp-echo-failure'] = c.return_value(
+                'ppp-options lcp-echo-failure')
+        if c.exists('ppp-options lcp-echo-interval'):
+            ppp_options['lcp-echo-interval'] = c.return_value(
+                'ppp-options lcp-echo-interval')
+        if c.exists('ppp-options ipv4'):
+            ppp_options['ipv4'] = c.return_value('ppp-options ipv4')
+        if c.exists('ppp-options ipv6'):
+            ppp_options['ipv6'] = c.return_value('ppp-options ipv6')
+        if c.exists('ppp-options ipv6-accept-peer-intf-id'):
+            ppp_options['ipv6-accept-peer-intf-id'] = 1
+        if c.exists('ppp-options ipv6-intf-id'):
+            ppp_options['ipv6-intf-id'] = c.return_value(
+                'ppp-options ipv6-intf-id')
+        if c.exists('ppp-options ipv6-peer-intf-id'):
+            ppp_options['ipv6-peer-intf-id'] = c.return_value(
+                'ppp-options ipv6-peer-intf-id')
+        if c.exists('ppp-options lcp-echo-timeout'):
+            ppp_options['lcp-echo-timeout'] = c.return_value(
+                'ppp-options lcp-echo-timeout')
+
+    if len(ppp_options) != 0:
+        config_data['ppp_options'] = ppp_options
+
+    if c.exists(['session-control']):
+        config_data['sesscrtl'] = c.return_value(['session-control'])
+
+    return config_data
+
 
 def verify(c):
-  if c == None:
-    return None
-  ### vertify auth settings
-  if c['authentication']['mode'] == 'local':
-    if not c['authentication']['local-users']:
-      raise ConfigError('pppoe-server authentication local-users required')
-
-    for usr in c['authentication']['local-users']:
-      if not c['authentication']['local-users'][usr]['passwd']:
-        raise ConfigError('user ' + usr + ' requires a password')
-      ### if up/download is set, check that both have a value
-      if c['authentication']['local-users'][usr]['upload']:
-        if not c['authentication']['local-users'][usr]['download']:
-          raise ConfigError('user ' + usr + ' requires download speed value')
-      if c['authentication']['local-users'][usr]['download']:
-        if not c['authentication']['local-users'][usr]['upload']:
-          raise ConfigError('user ' + usr + ' requires upload speed value')
-
-  if c['authentication']['mode'] == 'radius':
-    if len(c['authentication']['radiussrv']) == 0:
-      raise ConfigError('radius server required')
-    for rsrv in c['authentication']['radiussrv']:
-      if c['authentication']['radiussrv'][rsrv]['secret'] == None:
-        raise ConfigError('radius server ' + rsrv + ' needs a secret configured')
-
-  ### local ippool and gateway settings config checks
-
-  if c['client_ip_subnets'] or c['client_ip_pool']:
-    if not c['ppp_gw']:
-      raise ConfigError('pppoe-server local-ip required')
-      
-  if c['ppp_gw'] and not c['client_ip_subnets'] and not c['client_ip_pool']:
-    print ("Warning: No pppoe client IPv4 pool defined") 
+    if c == None:
+        return None
+    # vertify auth settings
+    if c['authentication']['mode'] == 'local':
+        if not c['authentication']['local-users']:
+            raise ConfigError(
+                'pppoe-server authentication local-users required')
+
+        for usr in c['authentication']['local-users']:
+            if not c['authentication']['local-users'][usr]['passwd']:
+                raise ConfigError('user ' + usr + ' requires a password')
+            # if up/download is set, check that both have a value
+            if c['authentication']['local-users'][usr]['upload']:
+                if not c['authentication']['local-users'][usr]['download']:
+                    raise ConfigError(
+                        'user ' + usr + ' requires download speed value')
+            if c['authentication']['local-users'][usr]['download']:
+                if not c['authentication']['local-users'][usr]['upload']:
+                    raise ConfigError(
+                        'user ' + usr + ' requires upload speed value')
+
+    if c['authentication']['mode'] == 'radius':
+        if len(c['authentication']['radiussrv']) == 0:
+            raise ConfigError('radius server required')
+        for rsrv in c['authentication']['radiussrv']:
+            if c['authentication']['radiussrv'][rsrv]['secret'] == None:
+                raise ConfigError(
+                    'radius server ' + rsrv + ' needs a secret configured')
+
+    # local ippool and gateway settings config checks
+
+    if c['client_ip_subnets'] or c['client_ip_pool']:
+        if not c['ppp_gw']:
+            raise ConfigError('pppoe-server local-ip required')
+
+    if c['ppp_gw'] and not c['client_ip_subnets'] and not c['client_ip_pool']:
+        print ("Warning: No pppoe client IPv4 pool defined")
+
 
 def generate(c):
-  if c == None:
-    return None
-  
-  ### accel-cmd reload doesn't work so any change results in a restart of the daemon
-  try:
-    if os.cpu_count() == 1:
-      c['thread_cnt'] = 1
-    else:
-      c['thread_cnt'] = int(os.cpu_count()/2)
-  except KeyError:
-    if os.cpu_count() == 1:
-      c['thread_cnt'] = 1
-    else:
-      c['thread_cnt'] = int(os.cpu_count()/2)
+    if c == None:
+        return None
+
+    # accel-cmd reload doesn't work so any change results in a restart of the
+    # daemon
+    try:
+        if os.cpu_count() == 1:
+            c['thread_cnt'] = 1
+        else:
+            c['thread_cnt'] = int(os.cpu_count() / 2)
+    except KeyError:
+        if os.cpu_count() == 1:
+            c['thread_cnt'] = 1
+        else:
+            c['thread_cnt'] = int(os.cpu_count() / 2)
 
-  tmpl = jinja2.Template(pppoe_config, trim_blocks=True)
-  config_text = tmpl.render(c)
-  open(pppoe_conf,'w').write(config_text)
+    tmpl = jinja2.Template(pppoe_config, trim_blocks=True)
+    config_text = tmpl.render(c)
+    open(pppoe_conf, 'w').write(config_text)
 
-  if c['authentication']['local-users']:
-      write_chap_secrets(c)
+    if c['authentication']['local-users']:
+        write_chap_secrets(c)
+
+    return c
 
-  return c
 
 def apply(c):
-  if c == None:
-    if os.path.exists(pidfile):
-      accel_cmd('shutdown hard')
-      if os.path.exists(pidfile):
-        os.remove(pidfile)
-    return None
-
-  if not os.path.exists(pidfile):
-    ret = subprocess.call(['/usr/sbin/accel-pppd','-c',pppoe_conf,'-p',pidfile,'-d'])
-    chk_con()
-    if ret !=0 and os.path.exists(pidfile):
-      os.remove(pidfile)
-      raise ConfigError('accel-pppd failed to start')
-  else:
-    accel_cmd('restart')
-    sl.syslog(sl.LOG_NOTICE, "reloading config via daemon restart")
+    if c == None:
+        if os.path.exists(pidfile):
+            accel_cmd('shutdown hard')
+            if os.path.exists(pidfile):
+                os.remove(pidfile)
+        return None
+
+    if not os.path.exists(pidfile):
+        ret = subprocess.call(
+            ['/usr/sbin/accel-pppd', '-c', pppoe_conf, '-p', pidfile, '-d'])
+        chk_con()
+        if ret != 0 and os.path.exists(pidfile):
+            os.remove(pidfile)
+            raise ConfigError('accel-pppd failed to start')
+    else:
+        accel_cmd('restart')
+        sl.syslog(sl.LOG_NOTICE, "reloading config via daemon restart")
 
 if __name__ == '__main__':
-  try:
-    c = get_config()
-    verify(c)
-    generate(c)
-    apply(c)
-  except ConfigError as e:
-    print(e)
-    sys.exit(1)
+    try:
+        c = get_config()
+        verify(c)
+        generate(c)
+        apply(c)
+    except ConfigError as e:
+        print(e)
+        sys.exit(1)