summaryrefslogtreecommitdiff
path: root/src/etc/init.d
diff options
context:
space:
mode:
authorChristian Poessinger <christian@poessinger.com>2018-11-04 11:47:51 +0100
committerChristian Poessinger <christian@poessinger.com>2018-11-04 11:47:51 +0100
commit698c5a40b2ece2f3eb41ad932660f7ceb1f80092 (patch)
treec74926efcae3b5db9c8f861ab7d1d09c755e68f0 /src/etc/init.d
parent13a92825afc0d96773d4d510bd26e4fab5b77c3d (diff)
downloadvyos-1x-698c5a40b2ece2f3eb41ad932660f7ceb1f80092.tar.gz
vyos-1x-698c5a40b2ece2f3eb41ad932660f7ceb1f80092.zip
T959: XML/Python rewrite of "protocol igmp-proxy" and op-mode commands
Examples: ========= CFG commands: vyos@vyos# set protocols igmp-proxy disable-quickleave vyos@vyos# set protocols igmp-proxy interface eth0 alt-subnet '172.16.35.0/24' vyos@vyos# set protocols igmp-proxy interface eth0 alt-subnet '172.31.0.0/24' vyos@vyos# set protocols igmp-proxy interface eth0 role 'upstream' vyos@vyos# set protocols igmp-proxy interface eth1 role 'downstream' vyos@vyos# show protocols igmp-proxy { disable-quickleave interface eth0 { alt-subnet 172.16.35.0/24 alt-subnet 172.31.0.0/24 role upstream } interface eth1 { role downstream } } OP mode commands: ----------------- vyos@vyos:~$ show ip multicast interface Interface BytesIn PktsIn BytesOut PktsOut Local eth0 0.0b 0 0.0b 0 xxx.xxx.xxx.65 eth1 0.0b 0 0.0b 0 xxx.xxx.xx.201 vyos@vyos:~$ show ip multicast mfc Group Origin Pkts Bytes Wrong In Out xxx.x.xx.1 xxx.xx.0.1 10 9.81KB 0 eth0 eth1 xxx.x.xx.2 xxx.xx.0.1 --
Diffstat (limited to 'src/etc/init.d')
-rwxr-xr-xsrc/etc/init.d/igmpproxy166
1 files changed, 166 insertions, 0 deletions
diff --git a/src/etc/init.d/igmpproxy b/src/etc/init.d/igmpproxy
new file mode 100755
index 000000000..4a2c94a4d
--- /dev/null
+++ b/src/etc/init.d/igmpproxy
@@ -0,0 +1,166 @@
+#!/bin/sh
+### BEGIN INIT INFO
+# Provides: igmpproxy
+# Required-Start: $local_fs $network $remote_fs $syslog
+# Required-Stop: $local_fs $network $remote_fs $syslog
+# Default-Start: 2 3 4 5
+# Default-Stop: 0 1 6
+# Short-Description: IGMP multicast routing daemon
+# Description: IGMPproxy is a simple dynamic Multicast Routing Daemon
+# using only IGMP signalling. It's intended for simple
+# forwarding of Multicast traffic between networks.
+### END INIT INFO
+
+# Author: Pali Rohár <pali.rohar@gmail.com>
+
+# Do NOT "set -e"
+
+# PATH should only include /usr/* if it runs after the mountnfs.sh script
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+DESC="igmpproxy"
+NAME=igmpproxy
+DAEMON=/sbin/igmpproxy
+DAEMON_ARGS="/etc/igmpproxy.conf"
+PIDFILE=/var/run/$NAME.pid
+SCRIPTNAME=/etc/init.d/$NAME
+
+# Exit if the package is not installed
+[ -x "$DAEMON" ] || exit 0
+
+# Read configuration variable file if it is present
+[ -r /etc/default/$NAME ] && . /etc/default/$NAME
+
+# Load the VERBOSE setting and other rcS variables
+. /lib/init/vars.sh
+
+# Define LSB log_* functions.
+# Depend on lsb-base (>= 3.2-14) to ensure that this file is present
+# and status_of_proc is working.
+. /lib/lsb/init-functions
+
+#
+# Function that starts the daemon/service
+#
+do_start()
+{
+ # Return
+ # 0 if daemon has been started
+ # 1 if daemon was already running
+ # 2 if daemon could not be started
+ start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
+ || return 1
+ start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -b -m -- \
+ $DAEMON_OPTS $DAEMON_ARGS \
+ || return 2
+ # The above code will not work for interpreted scripts, use the next
+ # six lines below instead (Ref: #643337, start-stop-daemon(8) )
+ #start-stop-daemon --start --quiet --pidfile $PIDFILE --startas $DAEMON \
+ # --name $NAME --test > /dev/null \
+ # || return 1
+ #start-stop-daemon --start --quiet --pidfile $PIDFILE --startas $DAEMON \
+ # --name $NAME -- $DAEMON_ARGS \
+ # || return 2
+
+ # Add code here, if necessary, that waits for the process to be ready
+ # to handle requests from services started subsequently which depend
+ # on this one. As a last resort, sleep for some time.
+}
+
+#
+# Function that stops the daemon/service
+#
+do_stop()
+{
+ # Return
+ # 0 if daemon has been stopped
+ # 1 if daemon was already stopped
+ # 2 if daemon could not be stopped
+ # other if a failure occurred
+ start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
+ RETVAL="$?"
+ [ "$RETVAL" = 2 ] && return 2
+ # Wait for children to finish too if this is a daemon that forks
+ # and if the daemon is only ever run from this initscript.
+ # If the above conditions are not satisfied then add some other code
+ # that waits for the process to drop all resources that could be
+ # needed by services started subsequently. A last resort is to
+ # sleep for some time.
+ start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
+ [ "$?" = 2 ] && return 2
+ # Many daemons don't delete their pidfiles when they exit.
+ rm -f $PIDFILE
+ return "$RETVAL"
+}
+
+#
+# Function that sends a SIGHUP to the daemon/service
+#
+do_reload() {
+ #
+ # If the daemon can reload its configuration without
+ # restarting (for example, when it is sent a SIGHUP),
+ # then implement that here.
+ #
+ start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
+ return 0
+}
+
+case "$1" in
+ start)
+ [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC " "$NAME"
+ do_start
+ case "$?" in
+ 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+ 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+ esac
+ ;;
+ stop)
+ [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
+ do_stop
+ case "$?" in
+ 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+ 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+ esac
+ ;;
+ status)
+ status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
+ ;;
+ #reload|force-reload)
+ #
+ # If do_reload() is not implemented then leave this commented out
+ # and leave 'force-reload' as an alias for 'restart'.
+ #
+ #log_daemon_msg "Reloading $DESC" "$NAME"
+ #do_reload
+ #log_end_msg $?
+ #;;
+ restart|force-reload)
+ #
+ # If the "reload" option is implemented then remove the
+ # 'force-reload' alias
+ #
+ log_daemon_msg "Restarting $DESC" "$NAME"
+ do_stop
+ case "$?" in
+ 0|1)
+ do_start
+ case "$?" in
+ 0) log_end_msg 0 ;;
+ 1) log_end_msg 1 ;; # Old process is still running
+ *) log_end_msg 1 ;; # Failed to start
+ esac
+ ;;
+ *)
+ # Failed to stop
+ log_end_msg 1
+ ;;
+ esac
+ ;;
+ *)
+ #echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
+ echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
+ exit 3
+ ;;
+esac
+
+: