ipv6: T1831: migrate autoconf node

Autoconfigure addresses using Prefix Information in Router Advertisements.

8 files changed, 64 insertions, 7 deletions

diff --git a/src/conf_mode/interfaces-bonding.py b/src/conf_mode/interfaces-bonding.py
index a570371ab..ab58b9159 100755
--- a/src/conf_mode/interfaces-bonding.py
+++ b/src/conf_mode/interfaces-bonding.py
@@ -48,6 +48,7 @@ default_config_data = {
     'ip_enable_arp_ignore': 0,
     'ip_proxy_arp': 0,
     'ip_proxy_arp_pvlan': 0,
+    'ipv6_autoconf': 0,
     'ipv6_forwarding': 1,
     'ipv6_dup_addr_detect': 1,
     'intf': '',
@@ -191,6 +192,10 @@ def get_config():
     if conf.exists('ip proxy-arp-pvlan'):
         bond['ip_proxy_arp_pvlan'] = 1
 
+    # Enable acquisition of IPv6 address using stateless autoconfig (SLAAC)
+    if conf.exists('ipv6 address autoconf'):
+        bond['ipv6_autoconf'] = 1
+
     # Disable IPv6 forwarding on this interface
     if conf.exists('ipv6 disable-forwarding'):
         bond['ipv6_forwarding'] = 0
@@ -426,7 +431,9 @@ def apply(bond):
         b.set_proxy_arp(bond['ip_proxy_arp'])
         # Enable private VLAN proxy ARP on this interface
         b.set_proxy_arp_pvlan(bond['ip_proxy_arp_pvlan'])
-        # Disable IPv6 forwarding on this interface
+        # IPv6 address autoconfiguration
+        b.set_ipv6_autoconf(bond['ipv6_autoconf'])
+        # IPv6 forwarding
         b.set_ipv6_forwarding(bond['ipv6_forwarding'])
         # IPv6 Duplicate Address Detection (DAD) tries
         b.set_ipv6_dad_messages(bond['ipv6_dup_addr_detect'])
diff --git a/src/conf_mode/interfaces-bridge.py b/src/conf_mode/interfaces-bridge.py
index af669bc0e..1e143e30c 100755
--- a/src/conf_mode/interfaces-bridge.py
+++ b/src/conf_mode/interfaces-bridge.py
@@ -46,6 +46,7 @@ default_config_data = {
     'ip_enable_arp_accept': 0,
     'ip_enable_arp_announce': 0,
     'ip_enable_arp_ignore': 0,
+    'ipv6_autoconf': 0,
     'ipv6_forwarding': 1,
     'ipv6_dup_addr_detect': 1,
     'igmp_querier': 0,
@@ -154,6 +155,10 @@ def get_config():
     if conf.exists('ip enable-arp-ignore'):
         bridge['ip_enable_arp_ignore'] = 1
 
+    # Enable acquisition of IPv6 address using stateless autoconfig (SLAAC)
+    if conf.exists('ipv6 address autoconf'):
+        bridge['ipv6_autoconf'] = 1
+
     # Disable IPv6 forwarding on this interface
     if conf.exists('ipv6 disable-forwarding'):
         bridge['ipv6_forwarding'] = 0
@@ -268,7 +273,9 @@ def apply(bridge):
         br.set_arp_announce(bridge['ip_enable_arp_announce'])
         # configure ARP ignore
         br.set_arp_ignore(bridge['ip_enable_arp_ignore'])
-        # Disable IPv6 forwarding on this interface
+        # IPv6 address autoconfiguration
+        br.set_ipv6_autoconf(bridge['ipv6_autoconf'])
+        # IPv6 forwarding
         br.set_ipv6_forwarding(bridge['ipv6_forwarding'])
         # IPv6 Duplicate Address Detection (DAD) tries
         br.set_ipv6_dad_messages(bridge['ipv6_dup_addr_detect'])
diff --git a/src/conf_mode/interfaces-ethernet.py b/src/conf_mode/interfaces-ethernet.py
index e2017173a..c7fabce60 100755
--- a/src/conf_mode/interfaces-ethernet.py
+++ b/src/conf_mode/interfaces-ethernet.py
@@ -48,6 +48,7 @@ default_config_data = {
     'ip_enable_arp_ignore': 0,
     'ip_proxy_arp': 0,
     'ip_proxy_arp_pvlan': 0,
+    'ipv6_autoconf': 0,
     'ipv6_forwarding': 1,
     'ipv6_dup_addr_detect': 1,
     'intf': '',
@@ -169,6 +170,10 @@ def get_config():
     if conf.exists('ip proxy-arp-pvlan'):
         eth['ip_proxy_arp_pvlan'] = 1
 
+    # Enable acquisition of IPv6 address using stateless autoconfig (SLAAC)
+    if conf.exists('ipv6 address autoconf'):
+        eth['ipv6_autoconf'] = 1
+
     # Disable IPv6 forwarding on this interface
     if conf.exists('ipv6 disable-forwarding'):
         eth['ipv6_forwarding'] = 0
@@ -337,6 +342,9 @@ def apply(eth):
         # Enable private VLAN proxy ARP on this interface
         e.set_proxy_arp_pvlan(eth['ip_proxy_arp_pvlan'])
         # Disable IPv6 forwarding on this interface
+        # IPv6 address autoconfiguration
+        e.set_ipv6_autoconf(eth['ipv6_autoconf'])
+        # IPv6 forwarding
         e.set_ipv6_forwarding(eth['ipv6_forwarding'])
         # IPv6 Duplicate Address Detection (DAD) tries
         e.set_ipv6_dad_messages(eth['ipv6_dup_addr_detect'])
diff --git a/src/conf_mode/interfaces-l2tpv3.py b/src/conf_mode/interfaces-l2tpv3.py
index d0c610625..18ae1f4d8 100755
--- a/src/conf_mode/interfaces-l2tpv3.py
+++ b/src/conf_mode/interfaces-l2tpv3.py
@@ -33,6 +33,7 @@ default_config_data = {
     'local_address': '',
     'local_port': 5000,
     'intf': '',
+    'ipv6_autoconf': 0,
     'ipv6_forwarding': 1,
     'ipv6_dup_addr_detect': 1,
     'mtu': 1488,
@@ -103,6 +104,10 @@ def get_config():
     if conf.exists('local-ip'):
         l2tpv3['local_address'] = conf.return_value('local-ip')
 
+    # Enable acquisition of IPv6 address using stateless autoconfig (SLAAC)
+    if conf.exists('ipv6 address autoconf'):
+        l2tpv3['ipv6_autoconf'] = 1
+
     # Disable IPv6 forwarding on this interface
     if conf.exists('ipv6 disable-forwarding'):
         l2tpv3['ipv6_forwarding'] = 0
@@ -203,7 +208,9 @@ def apply(l2tpv3):
         l.set_alias(l2tpv3['description'])
         # Maximum Transfer Unit (MTU)
         l.set_mtu(l2tpv3['mtu'])
-        # Disable IPv6 forwarding on this interface
+        # IPv6 address autoconfiguration
+        l.set_ipv6_autoconf(l2tpv3['ipv6_autoconf'])
+        # IPv6 forwarding
         l.set_ipv6_forwarding(l2tpv3['ipv6_forwarding'])
         # IPv6 Duplicate Address Detection (DAD) tries
         l.set_ipv6_dad_messages(l2tpv3['ipv6_dup_addr_detect'])
diff --git a/src/conf_mode/interfaces-openvpn.py b/src/conf_mode/interfaces-openvpn.py
index 143bf9ae9..a91cc2d73 100755
--- a/src/conf_mode/interfaces-openvpn.py
+++ b/src/conf_mode/interfaces-openvpn.py
@@ -294,6 +294,7 @@ default_config_data = {
     'encryption': '',
     'hash': '',
     'intf': '',
+    'ipv6_autoconf': 0,
     'ipv6_forwarding': 1,
     'ipv6_dup_addr_detect': 1,
     'ping_restart': '60',
@@ -492,6 +493,10 @@ def get_config():
     if conf.exists('local-port'):
         openvpn['local_port'] = conf.return_value('local-port')
 
+    # Enable acquisition of IPv6 address using stateless autoconfig (SLAAC)
+    if conf.exists('ipv6 address autoconf'):
+        openvpn['ipv6_autoconf'] = 1
+
     # Disable IPv6 forwarding on this interface
     if conf.exists('ipv6 disable-forwarding'):
         openvpn['ipv6_forwarding'] = 0
@@ -1049,7 +1054,9 @@ def apply(openvpn):
         o = VTunIf(openvpn['intf'])
         # update interface description used e.g. within SNMP
         o.set_alias(openvpn['description'])
-        # Disable IPv6 forwarding on this interface
+        # IPv6 address autoconfiguration
+        o.set_ipv6_autoconf(openvpn['ipv6_autoconf'])
+        # IPv6 forwarding
         o.set_ipv6_forwarding(openvpn['ipv6_forwarding'])
         # IPv6 Duplicate Address Detection (DAD) tries
         o.set_ipv6_dad_messages(openvpn['ipv6_dup_addr_detect'])
diff --git a/src/conf_mode/interfaces-pseudo-ethernet.py b/src/conf_mode/interfaces-pseudo-ethernet.py
index 14b868b0a..4b1abc553 100755
--- a/src/conf_mode/interfaces-pseudo-ethernet.py
+++ b/src/conf_mode/interfaces-pseudo-ethernet.py
@@ -45,6 +45,7 @@ default_config_data = {
     'ip_enable_arp_ignore': 0,
     'ip_proxy_arp': 0,
     'ip_proxy_arp_pvlan': 0,
+    'ipv6_autoconf': 0,
     'ipv6_forwarding': 1,
     'ipv6_dup_addr_detect': 1,
     'intf': '',
@@ -147,6 +148,10 @@ def get_config():
     if conf.exists(['ip', 'proxy-arp-pvlan']):
         peth['ip_proxy_arp_pvlan'] = 1
 
+    # Enable acquisition of IPv6 address using stateless autoconfig (SLAAC)
+    if conf.exists('ipv6 address autoconf'):
+        peth['ipv6_autoconf'] = 1
+
     # Disable IPv6 forwarding on this interface
     if conf.exists('ipv6 disable-forwarding'):
         peth['ipv6_forwarding'] = 0
@@ -306,7 +311,9 @@ def apply(peth):
     p.set_proxy_arp(peth['ip_proxy_arp'])
     # Enable private VLAN proxy ARP on this interface
     p.set_proxy_arp_pvlan(peth['ip_proxy_arp_pvlan'])
-    # Disable IPv6 forwarding on this interface
+    # IPv6 address autoconfiguration
+    p.set_ipv6_autoconf(peth['ipv6_autoconf'])
+    # IPv6 forwarding
     p.set_ipv6_forwarding(peth['ipv6_forwarding'])
     # IPv6 Duplicate Address Detection (DAD) tries
     p.set_ipv6_dad_messages(peth['ipv6_dup_addr_detect'])
diff --git a/src/conf_mode/interfaces-vxlan.py b/src/conf_mode/interfaces-vxlan.py
index e1d31369e..294864bc1 100755
--- a/src/conf_mode/interfaces-vxlan.py
+++ b/src/conf_mode/interfaces-vxlan.py
@@ -37,6 +37,7 @@ default_config_data = {
     'ip_enable_arp_announce': 0,
     'ip_enable_arp_ignore': 0,
     'ip_proxy_arp': 0,
+    'ipv6_autoconf': 0,
     'ipv6_forwarding': 1,
     'ipv6_dup_addr_detect': 1,
     'link': '',
@@ -105,6 +106,10 @@ def get_config():
     if conf.exists('ip enable-proxy-arp'):
         vxlan['ip_proxy_arp'] = 1
 
+    # Enable acquisition of IPv6 address using stateless autoconfig (SLAAC)
+    if conf.exists('ipv6 address autoconf'):
+        vxlan['ipv6_autoconf'] = 1
+
     # Disable IPv6 forwarding on this interface
     if conf.exists('ipv6 disable-forwarding'):
         vxlan['ipv6_forwarding'] = 0
@@ -211,7 +216,9 @@ def apply(vxlan):
         v.set_arp_ignore(vxlan['ip_enable_arp_ignore'])
         # Enable proxy-arp on this interface
         v.set_proxy_arp(vxlan['ip_proxy_arp'])
-        # Disable IPv6 forwarding on this interface
+        # IPv6 address autoconfiguration
+        v.set_ipv6_autoconf(vxlan['ipv6_autoconf'])
+        # IPv6 forwarding
         v.set_ipv6_forwarding(vxlan['ipv6_forwarding'])
         # IPv6 Duplicate Address Detection (DAD) tries
         v.set_ipv6_dad_messages(vxlan['ipv6_dup_addr_detect'])
diff --git a/src/conf_mode/interfaces-wireless.py b/src/conf_mode/interfaces-wireless.py
index 2d0b2ade7..d368cfa5d 100755
--- a/src/conf_mode/interfaces-wireless.py
+++ b/src/conf_mode/interfaces-wireless.py
@@ -827,6 +827,7 @@ default_config_data = {
     'ip_enable_arp_accept': 0,
     'ip_enable_arp_announce': 0,
     'ip_enable_arp_ignore': 0,
+    'ipv6_autoconf': 0,
     'ipv6_forwarding': 1,
     'ipv6_dup_addr_detect': 1,
     'mac' : '',
@@ -1138,6 +1139,10 @@ def get_config():
     if conf.exists('ip enable-arp-announce'):
         wifi['ip_enable_arp_announce'] = 1
 
+    # Enable acquisition of IPv6 address using stateless autoconfig (SLAAC)
+    if conf.exists('ipv6 address autoconf'):
+        wifi['ipv6_autoconf'] = 1
+
     # ARP enable ignore
     if conf.exists('ip enable-arp-ignore'):
         wifi['ip_enable_arp_ignore'] = 1
@@ -1497,7 +1502,9 @@ def apply(wifi):
         w.set_arp_announce(wifi['ip_enable_arp_announce'])
         # configure ARP ignore
         w.set_arp_ignore(wifi['ip_enable_arp_ignore'])
-        # Disable IPv6 forwarding on this interface
+        # IPv6 address autoconfiguration
+        w.set_ipv6_autoconf(wifi['ipv6_autoconf'])
+        # IPv6 forwarding
         w.set_ipv6_forwarding(wifi['ipv6_forwarding'])
         # IPv6 Duplicate Address Detection (DAD) tries
         w.set_ipv6_dad_messages(wifi['ipv6_dup_addr_detect'])