summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CONTRIBUTING.md12
-rw-r--r--Makefile6
-rw-r--r--data/templates/accel-ppp/ipoe.config.tmpl2
-rw-r--r--data/templates/accel-ppp/l2tp.config.tmpl2
-rw-r--r--data/templates/accel-ppp/pppoe.config.tmpl2
-rw-r--r--data/templates/accel-ppp/pptp.config.tmpl2
-rw-r--r--data/templates/accel-ppp/sstp.config.tmpl2
-rw-r--r--data/templates/dhcp-client/daemon-options.tmpl5
-rw-r--r--data/templates/dhcp-client/ipv4.tmpl24
-rw-r--r--data/templates/dhcp-client/ipv6.tmpl56
-rw-r--r--data/templates/dhcp-client/ipv6_new.tmpl47
-rw-r--r--data/templates/frr/bgp.frr.tmpl2
-rw-r--r--data/templates/lcd/LCDd.conf.tmpl126
-rw-r--r--data/templates/lcd/lcdproc.conf.tmpl60
-rw-r--r--data/templates/mdns-repeater/mdns-repeater.tmpl2
-rw-r--r--data/templates/ntp/ntp.conf.tmpl2
-rw-r--r--data/templates/router-advert/radvd.conf.tmpl72
-rw-r--r--data/templates/ssh/override.conf.tmpl3
-rw-r--r--data/templates/system/curlrc.tmpl16
-rw-r--r--data/templates/system/ssh_config.tmpl3
-rw-r--r--data/templates/wifi/cfg80211.conf.tmpl4
-rw-r--r--data/templates/wifi/crda.tmpl4
-rw-r--r--data/templates/wifi/hostapd.conf.tmpl424
-rw-r--r--data/templates/wifi/wpa_supplicant.conf.tmpl4
-rw-r--r--interface-definitions/include/accel-radius-additions.xml.in12
-rw-r--r--interface-definitions/include/bgp-afi-aggregate-address.xml.i24
-rw-r--r--interface-definitions/include/interface-arp-cache-timeout.xml.i1
-rw-r--r--interface-definitions/include/nat-rule.xml.i6
-rw-r--r--interface-definitions/interfaces-bonding.xml.in2
-rw-r--r--interface-definitions/interfaces-bridge.xml.in7
-rw-r--r--interface-definitions/interfaces-ethernet.xml.in2
-rw-r--r--interface-definitions/interfaces-l2tpv3.xml.in3
-rw-r--r--interface-definitions/interfaces-pseudo-ethernet.xml.in2
-rw-r--r--interface-definitions/interfaces-vxlan.xml.in1
-rw-r--r--interface-definitions/interfaces-wireguard.xml.in10
-rw-r--r--interface-definitions/interfaces-wireless.xml.in15
-rw-r--r--interface-definitions/lldp.xml.in3
-rw-r--r--interface-definitions/nat.xml.in6
-rw-r--r--interface-definitions/protocols-bfd.xml.in2
-rw-r--r--interface-definitions/service_mdns-repeater.xml.in (renamed from interface-definitions/mdns-repeater.xml.in)3
-rw-r--r--interface-definitions/service_router-advert.xml.in11
-rw-r--r--interface-definitions/system-lcd.xml.in62
-rw-r--r--interface-definitions/system-options.xml.in10
-rw-r--r--op-mode-definitions/add-system-image.xml62
-rw-r--r--op-mode-definitions/configure.xml24
-rw-r--r--op-mode-definitions/connect.xml (renamed from op-mode-definitions/connect-disconnect.xml)22
-rw-r--r--op-mode-definitions/disconnect.xml20
-rw-r--r--op-mode-definitions/force-arp.xml8
-rw-r--r--op-mode-definitions/force-ipv6-nd.xml33
-rw-r--r--op-mode-definitions/force-ipv6-rd.xml34
-rw-r--r--op-mode-definitions/lldp.xml4
-rw-r--r--op-mode-definitions/monitor-bandwidth-test.xml (renamed from op-mode-definitions/bandwidth-test.xml)0
-rw-r--r--op-mode-definitions/monitor-bandwidth.xml (renamed from op-mode-definitions/bandwidth-monitor.xml)0
-rw-r--r--op-mode-definitions/monitor-log.xml13
-rw-r--r--op-mode-definitions/monitor-ndp.xml6
-rw-r--r--op-mode-definitions/ping.xml23
-rw-r--r--op-mode-definitions/show-console-server.xml13
-rw-r--r--op-mode-definitions/show-hardware.xml10
-rw-r--r--op-mode-definitions/show-interfaces-pppoe.xml2
-rw-r--r--op-mode-definitions/show-interfaces-wirelessmodem.xml2
-rw-r--r--op-mode-definitions/show-ipv6-bgp.xml24
-rw-r--r--op-mode-definitions/show-system.xml14
-rw-r--r--op-mode-definitions/show-vrf.xml6
-rw-r--r--op-mode-definitions/traceroute.xml36
-rw-r--r--python/vyos/config.py152
-rw-r--r--python/vyos/configdict.py540
-rw-r--r--python/vyos/configsession.py2
-rw-r--r--python/vyos/configsource.py318
-rw-r--r--python/vyos/configverify.py67
-rw-r--r--python/vyos/ifconfig/__init__.py2
-rw-r--r--python/vyos/ifconfig/bond.py118
-rw-r--r--python/vyos/ifconfig/bridge.py79
-rw-r--r--python/vyos/ifconfig/dhcp.py136
-rw-r--r--python/vyos/ifconfig/dummy.py19
-rw-r--r--python/vyos/ifconfig/ethernet.py57
-rw-r--r--python/vyos/ifconfig/interface.py289
-rw-r--r--python/vyos/ifconfig/loopback.py12
-rw-r--r--python/vyos/ifconfig/macsec.py19
-rw-r--r--python/vyos/ifconfig/macvlan.py19
-rw-r--r--python/vyos/ifconfig/vxlan.py20
-rw-r--r--python/vyos/ifconfig/wireguard.py136
-rw-r--r--python/vyos/ifconfig_vlan.py245
-rw-r--r--python/vyos/util.py23
-rw-r--r--python/vyos/validate.py10
-rw-r--r--python/vyos/xml/__init__.py15
-rw-r--r--python/vyos/xml/definition.py23
-rw-r--r--python/vyos/xml/test_xml.py2
-rwxr-xr-xsrc/conf_mode/host_name.py17
-rwxr-xr-xsrc/conf_mode/interfaces-bonding.py439
-rwxr-xr-xsrc/conf_mode/interfaces-bridge.py411
-rwxr-xr-xsrc/conf_mode/interfaces-dummy.py32
-rwxr-xr-xsrc/conf_mode/interfaces-ethernet.py296
-rwxr-xr-xsrc/conf_mode/interfaces-geneve.py133
-rwxr-xr-xsrc/conf_mode/interfaces-l2tpv3.py260
-rwxr-xr-xsrc/conf_mode/interfaces-loopback.py30
-rwxr-xr-xsrc/conf_mode/interfaces-macsec.py61
-rwxr-xr-xsrc/conf_mode/interfaces-pppoe.py49
-rwxr-xr-xsrc/conf_mode/interfaces-pseudo-ethernet.py236
-rwxr-xr-xsrc/conf_mode/interfaces-vxlan.py253
-rwxr-xr-xsrc/conf_mode/interfaces-wireguard.py334
-rwxr-xr-xsrc/conf_mode/interfaces-wireless.py688
-rwxr-xr-xsrc/conf_mode/interfaces-wirelessmodem.py66
-rwxr-xr-xsrc/conf_mode/nat.py17
-rwxr-xr-xsrc/conf_mode/service_console-server.py37
-rwxr-xr-xsrc/conf_mode/service_ipoe-server.py8
-rwxr-xr-xsrc/conf_mode/service_mdns-repeater.py (renamed from src/conf_mode/mdns_repeater.py)52
-rwxr-xr-xsrc/conf_mode/service_pppoe-server.py9
-rwxr-xr-xsrc/conf_mode/service_router-advert.py167
-rwxr-xr-xsrc/conf_mode/ssh.py4
-rwxr-xr-xsrc/conf_mode/system-login.py2
-rwxr-xr-xsrc/conf_mode/system-options.py31
-rwxr-xr-xsrc/conf_mode/system_lcd.py84
-rwxr-xr-xsrc/conf_mode/vpn_l2tp.py6
-rwxr-xr-xsrc/conf_mode/vpn_pptp.py6
-rwxr-xr-xsrc/conf_mode/vpn_sstp.py6
-rw-r--r--src/etc/dhcp/dhclient-enter-hooks.d/03-vyos-ipwrapper9
-rw-r--r--src/etc/dhcp/dhclient-exit-hooks.d/01-vyos-cleanup10
-rw-r--r--src/etc/systemd/system/LCDd.service.d/override.conf8
-rw-r--r--src/etc/systemd/system/hostapd@.service.d/override.conf7
-rw-r--r--src/etc/systemd/system/radvd.service.d/override.conf34
-rwxr-xr-xsrc/helpers/vyos-load-config.py6
-rwxr-xr-xsrc/migration-scripts/interfaces/7-to-817
-rwxr-xr-xsrc/op_mode/lldp_op.py21
-rwxr-xr-xsrc/op_mode/ping.py8
-rwxr-xr-xsrc/op_mode/show_interfaces.py3
-rwxr-xr-xsrc/op_mode/wireguard.py17
-rwxr-xr-xsrc/services/vyos-http-api-server3
-rw-r--r--src/systemd/lcdproc.service13
-rw-r--r--src/systemd/wpa_supplicant-macsec@.service34
-rw-r--r--src/tests/test_initial_setup.py10
-rwxr-xr-xsrc/validators/dotted-decimal33
131 files changed, 3269 insertions, 4421 deletions
diff --git a/CONTRIBUTING.md b/CONTRIBUTING.md
new file mode 100644
index 000000000..d8177a5f5
--- /dev/null
+++ b/CONTRIBUTING.md
@@ -0,0 +1,12 @@
+# Contributing to VyOS
+
+You wan't to help us improve VyOS? This is awesome. We accept any kind of Pull
+Requests on GitHub. To make the life of the maintainers and you as future
+contributor (or maybe maintainer) much easier we have come up with some basic
+rules. Instead of copy/pasting or maintaining two instances of how to contribute
+to VyOS you can find the entire process documented in our online documentation:
+https://docs.vyos.io/en/latest/contributing/development.html
+
+Also this guide might not be complete so any PR is much appreciated.
+
+It might also worth browsing our blog: https://blog.vyos.io
diff --git a/Makefile b/Makefile
index fecc093de..5b7e4da63 100644
--- a/Makefile
+++ b/Makefile
@@ -88,12 +88,14 @@ op_mode_definitions:
find $(CURDIR)/op-mode-definitions/ -type f -name "*.xml" | xargs -I {} $(CURDIR)/scripts/build-command-op-templates {} $(CURDIR)/schema/op-mode-definition.rng $(OP_TMPL_DIR) || exit 1
# XXX: delete top level op mode node.def's that now live in other packages
+ rm -f $(OP_TMPL_DIR)/add/node.def
rm -f $(OP_TMPL_DIR)/clear/node.def
rm -f $(OP_TMPL_DIR)/clear/interfaces/node.def
rm -f $(OP_TMPL_DIR)/set/node.def
rm -f $(OP_TMPL_DIR)/show/node.def
rm -f $(OP_TMPL_DIR)/show/interfaces/node.def
rm -f $(OP_TMPL_DIR)/show/ipv6/node.def
+ rm -f $(OP_TMPL_DIR)/show/ipv6/bgp/node.def
rm -f $(OP_TMPL_DIR)/show/ipv6/route/node.def
rm -f $(OP_TMPL_DIR)/restart/node.def
rm -f $(OP_TMPL_DIR)/monitor/node.def
@@ -103,6 +105,10 @@ op_mode_definitions:
rm -f $(OP_TMPL_DIR)/delete/node.def
rm -f $(OP_TMPL_DIR)/reset/vpn/node.def
+ # XXX: ping must be able to recursivly call itself as the
+ # options are provided from the script itself
+ ln -s ../node.tag $(OP_TMPL_DIR)/ping/node.tag/node.tag/
+
.PHONY: component_versions
.ONESHELL:
component_versions: $(BUILD_DIR) $(obj)
diff --git a/data/templates/accel-ppp/ipoe.config.tmpl b/data/templates/accel-ppp/ipoe.config.tmpl
index 84de5bf51..fca520efa 100644
--- a/data/templates/accel-ppp/ipoe.config.tmpl
+++ b/data/templates/accel-ppp/ipoe.config.tmpl
@@ -77,7 +77,7 @@ chap-secrets={{ chap_secrets_file }}
[radius]
verbose=1
{% for r in radius_server %}
-server={{ r.server }},{{ r.key }},auth-port={{ r.port }},req-limit=0,fail-time={{ r.fail_time }}
+server={{ r.server }},{{ r.key }},auth-port={{ r.port }},acct-port={{ r.acct_port }},req-limit=0,fail-time={{ r.fail_time }}
{% endfor -%}
acct-timeout={{ radius_acct_tmo }}
diff --git a/data/templates/accel-ppp/l2tp.config.tmpl b/data/templates/accel-ppp/l2tp.config.tmpl
index b0ef17525..b9131684d 100644
--- a/data/templates/accel-ppp/l2tp.config.tmpl
+++ b/data/templates/accel-ppp/l2tp.config.tmpl
@@ -83,7 +83,7 @@ chap-secrets={{ chap_secrets_file }}
[radius]
verbose=1
{% for r in radius_server %}
-server={{ r.server }},{{ r.key }},auth-port={{ r.port }},req-limit=0,fail-time={{ r.fail_time }}
+server={{ r.server }},{{ r.key }},auth-port={{ r.port }},acct-port={{ r.acct_port }},req-limit=0,fail-time={{ r.fail_time }}
{% endfor -%}
acct-timeout={{ radius_acct_tmo }}
diff --git a/data/templates/accel-ppp/pppoe.config.tmpl b/data/templates/accel-ppp/pppoe.config.tmpl
index 370ca7946..5ad628fde 100644
--- a/data/templates/accel-ppp/pppoe.config.tmpl
+++ b/data/templates/accel-ppp/pppoe.config.tmpl
@@ -93,7 +93,7 @@ chap-secrets={{ chap_secrets_file }}
[radius]
verbose=1
{% for r in radius_server %}
-server={{ r.server }},{{ r.key }},auth-port={{ r.port }},req-limit=0,fail-time={{ r.fail_time }}
+server={{ r.server }},{{ r.key }},auth-port={{ r.port }},acct-port={{ r.acct_port }},req-limit=0,fail-time={{ r.fail_time }}
{% endfor -%}
acct-timeout={{ radius_acct_tmo }}
diff --git a/data/templates/accel-ppp/pptp.config.tmpl b/data/templates/accel-ppp/pptp.config.tmpl
index 0bbfc13c5..e0f2c6da9 100644
--- a/data/templates/accel-ppp/pptp.config.tmpl
+++ b/data/templates/accel-ppp/pptp.config.tmpl
@@ -66,7 +66,7 @@ chap-secrets={{ chap_secrets_file }}
[radius]
verbose=1
{% for r in radius_server %}
-server={{ r.server }},{{ r.key }},auth-port={{ r.port }},req-limit=0,fail-time={{ r.fail_time }}
+server={{ r.server }},{{ r.key }},auth-port={{ r.port }},acct-port={{ r.acct_port }},req-limit=0,fail-time={{ r.fail_time }}
{% endfor -%}
acct-timeout={{ radius_acct_tmo }}
diff --git a/data/templates/accel-ppp/sstp.config.tmpl b/data/templates/accel-ppp/sstp.config.tmpl
index 2c8c00023..c9e4a1d7d 100644
--- a/data/templates/accel-ppp/sstp.config.tmpl
+++ b/data/templates/accel-ppp/sstp.config.tmpl
@@ -69,7 +69,7 @@ chap-secrets={{ chap_secrets_file }}
[radius]
verbose=1
{% for r in radius_server %}
-server={{ r.server }},{{ r.key }},auth-port={{ r.port }},req-limit=0,fail-time={{ r.fail_time }}
+server={{ r.server }},{{ r.key }},auth-port={{ r.port }},acct-port={{ r.acct_port }},req-limit=0,fail-time={{ r.fail_time }}
{% endfor -%}
acct-timeout={{ radius_acct_tmo }}
diff --git a/data/templates/dhcp-client/daemon-options.tmpl b/data/templates/dhcp-client/daemon-options.tmpl
index 12786b777..290aefa49 100644
--- a/data/templates/dhcp-client/daemon-options.tmpl
+++ b/data/templates/dhcp-client/daemon-options.tmpl
@@ -1 +1,4 @@
-DHCLIENT_OPTS="-nw -cf {{ conf_file }} -pf {{ pid_file }} -lf {{ lease_file }} {{ '-S' if dhcpv6_prm_only }} {{ '-T' if dhcpv6_temporary }} {{ ifname }}"
+### Autogenerated by interface.py ###
+
+DHCLIENT_OPTS="-nw -cf /var/lib/dhcp/dhclient_{{ifname}}.conf -pf /var/lib/dhcp/dhclient_{{ifname}}.pid -lf /var/lib/dhcp/dhclient_{{ifname}}.leases {{ifname}}"
+
diff --git a/data/templates/dhcp-client/ipv4.tmpl b/data/templates/dhcp-client/ipv4.tmpl
index ab772b5f6..8a44a9761 100644
--- a/data/templates/dhcp-client/ipv4.tmpl
+++ b/data/templates/dhcp-client/ipv4.tmpl
@@ -1,17 +1,19 @@
-# generated by dhcp.py
+### Autogenerated by interface.py ###
+
option rfc3442-classless-static-routes code 121 = array of unsigned integer 8;
timeout 60;
retry 300;
interface "{{ ifname }}" {
- send host-name "{{ hostname }}";
- {% if client_id -%}
- send dhcp-client-identifier "{{ client_id }}";
- {% endif -%}
- {% if vendor_class_id -%}
- send vendor-class-identifier "{{ vendor_class_id }}";
- {% endif -%}
- request subnet-mask, broadcast-address, routers, domain-name-servers,
- rfc3442-classless-static-routes, domain-name, interface-mtu;
- require subnet-mask;
+ send host-name "{{ dhcp_options.host_name }}";
+{% if dhcp_options.client_id is defined and dhcp_options.client_id is not none %}
+ send dhcp-client-identifier "{{ dhcp_options.client_id }}";
+{% endif %}
+{% if dhcp_options.vendor_class_id is defined and dhcp_options.vendor_class_id is not none %}
+ send vendor-class-identifier "{{ dhcp_options.vendor_class_id }}";
+{% endif %}
+ request subnet-mask, broadcast-address, routers, domain-name-servers,
+ rfc3442-classless-static-routes, domain-name, interface-mtu;
+ require subnet-mask;
}
+
diff --git a/data/templates/dhcp-client/ipv6.tmpl b/data/templates/dhcp-client/ipv6.tmpl
index 490f14726..5c0cea280 100644
--- a/data/templates/dhcp-client/ipv6.tmpl
+++ b/data/templates/dhcp-client/ipv6.tmpl
@@ -1,44 +1,48 @@
-# generated by dhcp.py
-# man https://www.unix.com/man-page/debian/5/dhcp6c.conf/
+### Autogenerated by interface.py ###
+# man https://www.unix.com/man-page/debian/5/dhcp6c.conf/
interface {{ ifname }} {
request domain-name-servers;
request domain-name;
-{% if dhcpv6_prm_only %}
+{% if dhcpv6_options is defined %}
+{% if dhcpv6_options.parameters_only is defined %}
information-only;
-{% endif %}
-{% if not dhcpv6_temporary %}
+{% endif %}
+{% if dhcpv6_options.temporary is not defined %}
send ia-na 1; # non-temporary address
-{% endif %}
-{% if dhcpv6_pd_interfaces %}
+{% endif %}
+{% if dhcpv6_options.prefix_delegation is defined %}
send ia-pd 2; # prefix delegation
+{% endif %}
{% endif %}
};
-{% if not dhcpv6_temporary %}
+{% if dhcpv6_options is defined %}
+{% if dhcpv6_options.temporary is not defined %}
id-assoc na 1 {
# Identity association NA
};
-{% endif %}
+{% endif %}
-{% if dhcpv6_pd_interfaces %}
+{% if dhcpv6_options.prefix_delegation is defined %}
id-assoc pd 2 {
-{% if dhcpv6_pd_length %}
- prefix ::/{{ dhcpv6_pd_length }} infinity;
-{% endif %}
-{% for intf in dhcpv6_pd_interfaces %}
- prefix-interface {{ intf.ifname }} {
-{% if intf.sla_id %}
- sla-id {{ intf.sla_id }};
-{% endif %}
-{% if intf.sla_len %}
- sla-len {{ intf.sla_len }};
-{% endif %}
-{% if intf.if_id %}
- ifid {{ intf.if_id }};
-{% endif %}
+{% if dhcpv6_options.prefix_delegation.length is defined %}
+ prefix ::/{{ dhcpv6_options.prefix_delegation.length }} infinity;
+{% endif %}
+{% for interface in dhcpv6_options.prefix_delegation.interface %}
+ prefix-interface {{ interface }} {
+{% if dhcpv6_options.prefix_delegation.interface[interface].sla_id is defined %}
+ sla-id {{ dhcpv6_options.prefix_delegation.interface[interface].sla_id }};
+{% endif %}
+{% if dhcpv6_options.prefix_delegation.interface[interface].sla_len is defined %}
+ sla-len {{ dhcpv6_options.prefix_delegation.interface[interface].sla_len }};
+{% endif %}
+{% if dhcpv6_options.prefix_delegation.interface[interface].address is defined %}
+ ifid {{ dhcpv6_options.prefix_delegation.interface[interface].address }};
+{% endif %}
};
-{% endfor %}
+{% endfor %}
};
-{% endif %}
+{% endif %}
+{% endif %}
diff --git a/data/templates/dhcp-client/ipv6_new.tmpl b/data/templates/dhcp-client/ipv6_new.tmpl
deleted file mode 100644
index 112431c5f..000000000
--- a/data/templates/dhcp-client/ipv6_new.tmpl
+++ /dev/null
@@ -1,47 +0,0 @@
-# generated by dhcp.py
-# man https://www.unix.com/man-page/debian/5/dhcp6c.conf/
-
-interface {{ ifname }} {
- request domain-name-servers;
- request domain-name;
-{% if dhcpv6_options is defined %}
-{% if dhcpv6_options.parameters_only is defined %}
- information-only;
-{% endif %}
-{% if dhcpv6_options.temporary is not defined %}
- send ia-na 1; # non-temporary address
-{% endif %}
-{% if dhcpv6_options.prefix_delegation is defined %}
- send ia-pd 2; # prefix delegation
-{% endif %}
-{% endif %}
-};
-
-{% if dhcpv6_options is defined %}
-{% if dhcpv6_options.temporary is not defined %}
-id-assoc na 1 {
- # Identity association NA
-};
-{% endif %}
-
-{% if dhcpv6_options.prefix_delegation is defined %}
-id-assoc pd 2 {
-{% if dhcpv6_options.prefix_delegation.length is defined %}
- prefix ::/{{ dhcpv6_options.prefix_delegation.length }} infinity;
-{% endif %}
-{% for interface in dhcpv6_options.prefix_delegation.interface %}
- prefix-interface {{ interface }} {
-{% if dhcpv6_options.prefix_delegation.interface[interface].sla_id is defined %}
- sla-id {{ dhcpv6_options.prefix_delegation.interface[interface].sla_id }};
-{% endif %}
-{% if dhcpv6_options.prefix_delegation.interface[interface].sla_len is defined %}
- sla-len {{ dhcpv6_options.prefix_delegation.interface[interface].sla_len }};
-{% endif %}
-{% if dhcpv6_options.prefix_delegation.interface[interface].address is defined %}
- ifid {{ dhcpv6_options.prefix_delegation.interface[interface].address }};
-{% endif %}
- };
-{% endfor %}
-};
-{% endif %}
-{% endif %}
diff --git a/data/templates/frr/bgp.frr.tmpl b/data/templates/frr/bgp.frr.tmpl
index cd6f31c93..cdf4cb4fe 100644
--- a/data/templates/frr/bgp.frr.tmpl
+++ b/data/templates/frr/bgp.frr.tmpl
@@ -1 +1 @@
-!
+!
diff --git a/data/templates/lcd/LCDd.conf.tmpl b/data/templates/lcd/LCDd.conf.tmpl
new file mode 100644
index 000000000..da749d04a
--- /dev/null
+++ b/data/templates/lcd/LCDd.conf.tmpl
@@ -0,0 +1,126 @@
+### Autogenerted by system-display.py ##
+
+# LCDd.conf -- configuration file for the LCDproc server daemon LCDd
+#
+# This file contains the configuration for the LCDd server.
+#
+# The format is ini-file-like. It is divided into sections that start at
+# markers that look like [section]. Comments are all line-based comments,
+# and are lines that start with '#' or ';'.
+#
+# The server has a 'central' section named [server]. For the menu there is
+# a section called [menu]. Further each driver has a section which
+# defines how the driver acts.
+#
+# The drivers are activated by specifying them in a driver= line in the
+# server section, like:
+#
+# Driver=curses
+#
+# This tells LCDd to use the curses driver.
+# The first driver that is loaded and is capable of output defines the
+# size of the display. The default driver to use is curses.
+# If the driver is specified using the -d <driver> command line option,
+# the Driver= options in the config file are ignored.
+#
+# The drivers read their own options from the respective sections.
+
+## Server section with all kinds of settings for the LCDd server ##
+[server]
+
+# Where can we find the driver modules ?
+# NOTE: Always place a slash as last character !
+DriverPath=/usr/lib/x86_64-linux-gnu/lcdproc/
+
+# Tells the server to load the given drivers. Multiple lines can be given.
+# The name of the driver is case sensitive and determines the section
+# where to look for further configuration options of the specific driver
+# as well as the name of the dynamic driver module to load at runtime.
+# The latter one can be changed by giving a File= directive in the
+# driver specific section.
+#
+# The following drivers are supported:
+# bayrad, CFontz, CFontzPacket, curses, CwLnx, ea65, EyeboxOne, futaba,
+# g15, glcd, glcdlib, glk, hd44780, icp_a106, imon, imonlcd,, IOWarrior,
+# irman, joy, lb216, lcdm001, lcterm, linux_input, lirc, lis, MD8800,
+# mdm166a, ms6931, mtc_s16209x, MtxOrb, mx5000, NoritakeVFD,
+# Olimex_MOD_LCD1x9, picolcd, pyramid, rawserial, sdeclcd, sed1330,
+# sed1520, serialPOS, serialVFD, shuttleVFD, sli, stv5730, svga, t6963,
+# text, tyan, ula200, vlsys_m428, xosd, yard2LCD
+
+{% if model is defined and model.startswith('CFA-') %}
+Driver=CFontzPacket
+{% endif %}
+
+# Tells the driver to bind to the given interface. [default: 127.0.0.1]
+Bind=127.0.0.1
+
+# Listen on this specified port. [default: 13666]
+Port=13666
+
+# Sets the reporting level; defaults to warnings and errors only.
+# [default: 2; legal: 0-5]
+ReportLevel=3
+
+# Should we report to syslog instead of stderr? [default: no; legal: yes, no]
+ReportToSyslog=yes
+
+# User to run as. LCDd will drop its root privileges and run as this user
+# instead. [default: nobody]
+User=nobody
+
+# The server will stay in the foreground if set to yes.
+# [default: no, legal: yes, no]
+Foreground=yes
+
+# Hello message: each entry represents a display line; default: builtin
+Hello="Starting VyOS"
+Hello=" ... "
+
+# GoodBye message: each entry represents a display line; default: builtin
+GoodBye=" VyOS shutting"
+GoodBye=" down... "
+
+# Sets the interval in microseconds for updating the display.
+# [default: 125000 meaning 8Hz]
+FrameInterval=250000 # 4 updates per second
+
+# Sets the default time in seconds to displays a screen. [default: 4]
+WaitTime=1
+
+# If set to no, LCDd will start with screen rotation disabled. This has the
+# same effect as if the ToggleRotateKey had been pressed. Rotation will start
+# if the ToggleRotateKey is pressed. Note that this setting does not turn off
+# priority sorting of screens. [default: on; legal: on, off]
+AutoRotate=on
+
+# If yes, the the serverscreen will be rotated as a usual info screen. If no,
+# it will be a background screen, only visible when no other screens are
+# active. The special value 'blank' is similar to no, but only a blank screen
+# is displayed. [default: on; legal: on, off, blank]
+ServerScreen=blank
+
+# Set master backlight setting. If set to 'open' a client may control the
+# backlight for its own screens (only). [default: open; legal: off, open, on]
+Backlight=on
+
+# Set master heartbeat setting. If set to 'open' a client may control the
+# heartbeat for its own screens (only). [default: open; legal: off, open, on]
+Heartbeat=off
+
+# set title scrolling speed [default: 10; legal: 0-10]
+TitleSpeed=10
+
+{% if model is defined and model is not none %}
+{% if model.startswith('CFA-') %}
+## CrystalFontz packet driver (for CFA533, CFA631, CFA633 & CFA635) ##
+[CFontzPacket]
+Model={{ model.split('-')[1] }}
+Device={{ device }}
+Contrast=350
+Brightness=500
+OffBrightness=50
+Reboot=yes
+USB=yes
+{% endif %}
+{% endif %}
diff --git a/data/templates/lcd/lcdproc.conf.tmpl b/data/templates/lcd/lcdproc.conf.tmpl
new file mode 100644
index 000000000..c79f3cd0d
--- /dev/null
+++ b/data/templates/lcd/lcdproc.conf.tmpl
@@ -0,0 +1,60 @@
+### autogenerated by system-lcd.py ###
+
+# LCDproc client configuration file
+
+[lcdproc]
+Server=127.0.0.1
+Port=13666
+
+# set reporting level
+ReportLevel=3
+
+# report to to syslog ?
+ReportToSyslog=true
+
+Foreground=yes
+
+[CPU]
+Active=true
+OnTime=1
+OffTime=2
+ShowInvisible=false
+
+[SMP-CPU]
+Active=false
+
+[Memory]
+Active=false
+
+[Load]
+Active=false
+
+[Uptime]
+Active=true
+
+[ProcSize]
+Active=false
+
+[Disk]
+Active=false
+
+[About]
+Active=false
+
+[TimeDate]
+Active=true
+TimeFormat="%H:%M:%S"
+
+[OldTime]
+Active=false
+
+[BigClock]
+Active=false
+
+[MiniClock]
+Active=false
+
+# Display the title bar in two-line mode. Note that with four lines or more
+# the title is always shown. [default: true; legal: true, false]
+ShowTitle=false
+
diff --git a/data/templates/mdns-repeater/mdns-repeater.tmpl b/data/templates/mdns-repeater/mdns-repeater.tmpl
index 3fc4db67e..80f4ab047 100644
--- a/data/templates/mdns-repeater/mdns-repeater.tmpl
+++ b/data/templates/mdns-repeater/mdns-repeater.tmpl
@@ -1,2 +1,2 @@
### Autogenerated by mdns_repeater.py ###
-DAEMON_ARGS="{{ interfaces | join(' ') }}"
+DAEMON_ARGS="{{ interface | join(' ') }}"
diff --git a/data/templates/ntp/ntp.conf.tmpl b/data/templates/ntp/ntp.conf.tmpl
index 1c51929fd..6ef0c0f2c 100644
--- a/data/templates/ntp/ntp.conf.tmpl
+++ b/data/templates/ntp/ntp.conf.tmpl
@@ -19,7 +19,7 @@ restrict -6 ::1
{% set options = options + 'noselect ' if server[srv].noselect is defined else '' %}
{% set options = options + 'preempt ' if server[srv].preempt is defined else '' %}
{% set options = options + 'prefer ' if server[srv].prefer is defined else '' %}
-server {{ srv }} iburst {{ options }}
+server {{ srv | replace('_', '-') }} iburst {{ options }}
{% endfor %}
{% endif %}
diff --git a/data/templates/router-advert/radvd.conf.tmpl b/data/templates/router-advert/radvd.conf.tmpl
index 073623eac..cebfc54b5 100644
--- a/data/templates/router-advert/radvd.conf.tmpl
+++ b/data/templates/router-advert/radvd.conf.tmpl
@@ -1,37 +1,47 @@
### Autogenerated by service_router-advert.py ###
-{% for i in interfaces -%}
-interface {{ i.name }} {
+{% if interface is defined and interface is not none %}
+{% for iface in interface %}
+interface {{ iface }} {
IgnoreIfMissing on;
- AdvDefaultPreference {{ i.default_preference }};
- AdvManagedFlag {{ i.managed_flag }};
- MaxRtrAdvInterval {{ i.interval_max }};
-{% if i.interval_min %}
- MinRtrAdvInterval {{ i.interval_min }};
-{% endif %}
- AdvReachableTime {{ i.reachable_time }};
- AdvIntervalOpt {{ i.send_advert }};
- AdvSendAdvert {{ i.send_advert }};
-{% if i.default_lifetime %}
- AdvDefaultLifetime {{ i.default_lifetime }};
-{% endif %}
-{% if i.link_mtu %}
- AdvLinkMTU {{ i.link_mtu }};
-{% endif %}
- AdvOtherConfigFlag {{ i.other_config_flag }};
- AdvRetransTimer {{ i.retrans_timer }};
- AdvCurHopLimit {{ i.hop_limit }};
-{% for p in i.prefixes %}
- prefix {{ p.prefix }} {
- AdvAutonomous {{ p.autonomous_flag }};
- AdvValidLifetime {{ p.valid_lifetime }};
- AdvOnLink {{ p.on_link }};
- AdvPreferredLifetime {{ p.preferred_lifetime }};
+{% if interface[iface].default_preference is defined and interface[iface].default_preference is not none %}
+ AdvDefaultPreference {{ interface[iface].default_preference }};
+{% endif %}
+{% if interface[iface].managed_flag is defined and interface[iface].managed_flag is not none %}
+ AdvManagedFlag {{ 'on' if interface[iface].managed_flag is defined else 'off' }};
+{% endif %}
+{% if interface[iface].interval.max is defined and interface[iface].interval.max is not none %}
+ MaxRtrAdvInterval {{ interface[iface].interval.max }};
+{% endif %}
+{% if interface[iface].interval.min is defined and interface[iface].interval.min is not none %}
+ MinRtrAdvInterval {{ interface[iface].interval.min }};
+{% endif %}
+{% if interface[iface].reachable_time is defined and interface[iface].reachable_time is not none %}
+ AdvReachableTime {{ interface[iface].reachable_time }};
+{% endif %}
+ AdvIntervalOpt {{ 'off' if interface[iface].no_send_advert is defined else 'on' }};
+ AdvSendAdvert {{ 'off' if interface[iface].no_send_advert is defined else 'on' }};
+{% if interface[iface].default_lifetime is defined %}
+ AdvDefaultLifetime {{ interface[iface].default_lifetime }};
+{% endif %}
+{% if interface[iface].link_mtu is defined %}
+ AdvLinkMTU {{ interface[iface].link_mtu }};
+{% endif %}
+ AdvOtherConfigFlag {{ 'on' if interface[iface].other_config_flag is defined else 'off' }};
+ AdvRetransTimer {{ interface[iface].retrans_timer }};
+ AdvCurHopLimit {{ interface[iface].hop_limit }};
+{% for prefix in interface[iface].prefix %}
+ prefix {{ prefix }} {
+ AdvAutonomous {{ 'off' if interface[iface].prefix[prefix].no_autonomous_flag is defined else 'on' }};
+ AdvValidLifetime {{ interface[iface].prefix[prefix].valid_lifetime }};
+ AdvOnLink {{ 'off' if interface[iface].prefix[prefix].no_on_link_flag is defined else 'on' }};
+ AdvPreferredLifetime {{ interface[iface].prefix[prefix].preferred_lifetime }};
};
-{% endfor %}
-{% if i.name_server %}
- RDNSS {{ i.name_server | join(" ") }} {
+{% endfor %}
+{% if interface[iface].name_server is defined %}
+ RDNSS {{ interface[iface].name_server | join(" ") }} {
};
-{% endif %}
+{% endif %}
};
-{% endfor -%}
+{% endfor -%}
+{% endif %}
diff --git a/data/templates/ssh/override.conf.tmpl b/data/templates/ssh/override.conf.tmpl
index 4276366ae..843aa927b 100644
--- a/data/templates/ssh/override.conf.tmpl
+++ b/data/templates/ssh/override.conf.tmpl
@@ -2,9 +2,10 @@
[Unit]
StartLimitIntervalSec=0
After=vyos-router.service
+ConditionPathExists={{config_file}}
[Service]
ExecStart=
-ExecStart={{vrf_command}}/usr/sbin/sshd -D $SSHD_OPTS
+ExecStart={{vrf_command}}/usr/sbin/sshd -f {{config_file}} -D $SSHD_OPTS
RestartSec=10
diff --git a/data/templates/system/curlrc.tmpl b/data/templates/system/curlrc.tmpl
index 675e35a0c..3e5ce801c 100644
--- a/data/templates/system/curlrc.tmpl
+++ b/data/templates/system/curlrc.tmpl
@@ -1,8 +1,8 @@
-{% if http_client is defined %}
-{% if http_client.source_interface is defined %}
---interface "{{ http_client.source_interface }}"
-{% endif %}
-{% if http_client.source_address is defined %}
---interface "{{ http_client.source_address }}"
-{% endif %}
-{% endif %}
+{% if http_client is defined %}
+{% if http_client.source_interface is defined %}
+--interface "{{ http_client.source_interface }}"
+{% endif %}
+{% if http_client.source_address is defined %}
+--interface "{{ http_client.source_address }}"
+{% endif %}
+{% endif %}
diff --git a/data/templates/system/ssh_config.tmpl b/data/templates/system/ssh_config.tmpl
new file mode 100644
index 000000000..509bd5479
--- /dev/null
+++ b/data/templates/system/ssh_config.tmpl
@@ -0,0 +1,3 @@
+{% if ssh_client is defined and ssh_client.source_address is defined and ssh_client.source_address is not none %}
+BindAddress {{ ssh_client.source_address }}
+{% endif %}
diff --git a/data/templates/wifi/cfg80211.conf.tmpl b/data/templates/wifi/cfg80211.conf.tmpl
index b21bacc1e..91df57aab 100644
--- a/data/templates/wifi/cfg80211.conf.tmpl
+++ b/data/templates/wifi/cfg80211.conf.tmpl
@@ -1,3 +1 @@
-{%- if regdom -%}
-options cfg80211 ieee80211_regdom={{ regdom }}
-{% endif %}
+{{ 'options cfg80211 ieee80211_regdom=' + regdom if regdom is defined }}
diff --git a/data/templates/wifi/crda.tmpl b/data/templates/wifi/crda.tmpl
index 750ad86ee..6cd125e37 100644
--- a/data/templates/wifi/crda.tmpl
+++ b/data/templates/wifi/crda.tmpl
@@ -1,3 +1 @@
-{%- if regdom -%}
-REGDOMAIN={{ regdom }}
-{% endif %}
+{{ 'REGDOMAIN=' + regdom if regdom is defined }}
diff --git a/data/templates/wifi/hostapd.conf.tmpl b/data/templates/wifi/hostapd.conf.tmpl
index d6068e4db..765668c57 100644
--- a/data/templates/wifi/hostapd.conf.tmpl
+++ b/data/templates/wifi/hostapd.conf.tmpl
@@ -9,7 +9,7 @@ device_name={{ description | truncate(32, True) }}
# management frames with the Host AP driver); wlan0 with many nl80211 drivers
# Note: This attribute can be overridden by the values supplied with the '-i'
# command line parameter.
-interface={{ intf }}
+interface={{ ifname }}
# Driver interface type (hostap/wired/none/nl80211/bsd);
# default: hostap). nl80211 is used with all Linux mac80211 drivers.
@@ -28,8 +28,7 @@ logger_syslog_level=0
logger_stdout=-1
logger_stdout_level=0
-{%- if country_code %}
-
+{% if country_code %}
# Country code (ISO/IEC 3166-1). Used to set regulatory domain.
# Set as needed to indicate country in which device is operating.
# This can limit available channels and transmit power.
@@ -42,14 +41,12 @@ country_code={{ country_code }}
ieee80211d=1
{% endif %}
-{%- if ssid %}
-
+{% if ssid %}
# SSID to be used in IEEE 802.11 management frames
ssid={{ ssid }}
{% endif %}
-{%- if channel %}
-
+{% if channel %}
# Channel number (IEEE 802.11)
# (default: 0, i.e., not set)
# Please note that some drivers do not use this value from hostapd and the
@@ -61,8 +58,7 @@ ssid={{ ssid }}
channel={{ channel }}
{% endif %}
-{%- if mode %}
-
+{% if mode %}
# Operation mode (a = IEEE 802.11a (5 GHz), b = IEEE 802.11b (2.4 GHz),
# g = IEEE 802.11g (2.4 GHz), ad = IEEE 802.11ad (60 GHz); a/g options are used
# with IEEE 802.11n (HT), too, to specify band). For IEEE 802.11ac (VHT), this
@@ -71,29 +67,30 @@ channel={{ channel }}
# special value "any" can be used to indicate that any support band can be used.
# This special case is currently supported only with drivers with which
# offloaded ACS is used.
-{% if 'n' in mode -%}
+{% if 'n' in mode %}
hw_mode=g
-{% elif 'ac' in mode -%}
+{% elif 'ac' in mode %}
hw_mode=a
ieee80211h=1
ieee80211ac=1
-{% else -%}
+{% else %}
hw_mode={{ mode }}
-{% endif %}
+{% endif %}
{% endif %}
# ieee80211w: Whether management frame protection (MFP) is enabled
# 0 = disabled (default)
# 1 = optional
# 2 = required
-{% if 'disabled' in mgmt_frame_protection -%}
+{% if 'disabled' in mgmt_frame_protection %}
ieee80211w=0
-{% elif 'optional' in mgmt_frame_protection -%}
+{% elif 'optional' in mgmt_frame_protection %}
ieee80211w=1
-{% elif 'required' in mgmt_frame_protection -%}
+{% elif 'required' in mgmt_frame_protection %}
ieee80211w=2
{% endif %}
+{% if capabilities is defined and capabilities.ht is defined %}
# ht_capab: HT capabilities (list of flags)
# LDPC coding capability: [LDPC] = supported
# Supported channel width set: [HT40-] = both 20 MHz and 40 MHz with secondary
@@ -127,79 +124,50 @@ ieee80211w=2
# DSSS/CCK Mode in 40 MHz: [DSSS_CCK-40] = allowed (not allowed if not set)
# 40 MHz intolerant [40-INTOLERANT] (not advertised if not set)
# L-SIG TXOP protection support: [LSIG-TXOP-PROT] (disabled if not set)
-{% if cap_ht %}
-ht_capab=
-{%- endif -%}
-
-{%- if cap_ht_40mhz_incapable -%}
-[40-INTOLERANT]
-{%- endif -%}
-
-{%- if cap_ht_delayed_block_ack -%}
-[DELAYED-BA]
-{%- endif -%}
-
-{%- if cap_ht_dsss_cck_40 -%}
-[DSSS_CCK-40]
-{%- endif -%}
-
-{%- if cap_ht_greenfield -%}
-[GF]
-{%- endif -%}
-
-{%- if cap_ht_ldpc -%}
-[LDPC]
-{%- endif -%}
-
-{%- if cap_ht_lsig_protection -%}
-[LSIG-TXOP-PROT]
-{%- endif -%}
-
-{%- if cap_ht_max_amsdu -%}
-[MAX-AMSDU-{{ cap_ht_max_amsdu }}]
-{%- endif -%}
-
-{%- if cap_ht_smps -%}
-[SMPS-{{ cap_ht_smps | upper }}]
-{%- endif -%}
-
-{%- if cap_ht_chan_set_width -%}
-{%- for csw in cap_ht_chan_set_width -%}
-[{{ csw | upper }}]
-{%- endfor -%}
-{%- endif -%}
-
-{%- if cap_ht_short_gi -%}
-{%- for gi in cap_ht_short_gi -%}
-[SHORT-GI-{{ gi }}]
-{%- endfor -%}
-{%- endif -%}
-
-{%- if cap_ht_stbc_tx -%}
-[TX-STBC]
-{%- endif -%}
-{%- if cap_ht_stbc_rx -%}
-[RX-STBC{{ cap_ht_stbc_rx }}]
-{%- endif %}
+{% set output = '' %}
+{% set output = output + '[40-INTOLERANT]' if capabilities.ht.fourtymhz_incapable is defined else '' %}
+{% set output = output + '[DELAYED-BA]' if capabilities.ht.delayed_block_ack is defined else '' %}
+{% set output = output + '[DSSS_CCK-40]' if capabilities.ht.dsss_cck_40 is defined else '' %}
+{% set output = output + '[GF]' if capabilities.ht.greenfield is defined else '' %}
+{% set output = output + '[LDPC]' if capabilities.ht.ldpc is defined else '' %}
+{% set output = output + '[LSIG-TXOP-PROT]' if capabilities.ht.lsig_protection is defined else '' %}
+{% set output = output + '[TX-STBC]' if capabilities.ht.stbc.tx is defined else '' %}
+{% set output = output + '[RX-STBC-' + capabilities.ht.stbc.rx | upper + ']' if capabilities.ht.stbc.tx is defined else '' %}
+{% set output = output + '[MAX-AMSDU-' + capabilities.ht.max_amsdu + ']' if capabilities.ht.max_amsdu is defined else '' %}
+{% set output = output + '[SMPS-' + capabilities.ht.smps | upper + ']' if capabilities.ht.smps is defined else '' %}
+
+{% if capabilities.ht.channel_set_width is defined %}
+{% for csw in capabilities.ht.channel_set_width %}
+{% set output = output + '[' + csw | upper + ']' %}
+{% endfor %}
+{% endif %}
-# Required for full HT and VHT functionality
-wme_enabled=1
+{% if capabilities.ht.short_gi is defined %}
+{% for short_gi in capabilities.ht.short_gi %}
+{% set output = output + '[SHORT-GI-' + short_gi | upper + ']' %}
+{% endfor %}
+{% endif %}
-{% if cap_ht_powersave -%}
+ht_capab={{ output }}
+
+{% if capabilities.ht.auto_powersave is defined %}
# WMM-PS Unscheduled Automatic Power Save Delivery [U-APSD]
# Enable this flag if U-APSD supported outside hostapd (eg., Firmware/driver)
uapsd_advertisement_enabled=1
-{%- endif %}
+{% endif %}
+
+{% endif %}
+
+# Required for full HT and VHT functionality
+wme_enabled=1
-{% if cap_req_ht -%}
+
+{% if capabilities is defined and capabilities.require_ht is defined %}
# Require stations to support HT PHY (reject association if they do not)
require_ht=1
{% endif %}
-{%- if cap_vht_chan_set_width -%}
-vht_oper_chwidth={{ cap_vht_chan_set_width }}
-{%- endif %}
-
+{% if capabilities is defined and capabilities.vht is defined %}
# vht_capab: VHT capabilities (list of flags)
#
# vht_max_mpdu_len: [MAX-MPDU-7991] [MAX-MPDU-11454]
@@ -316,133 +284,95 @@ vht_oper_chwidth={{ cap_vht_chan_set_width }}
# Tx Antenna Pattern Consistency: [TX-ANTENNA-PATTERN]
# Indicates the possibility of Tx antenna pattern change
# 0 = Tx antenna pattern might change during the lifetime of an association
-# 1 = Tx antenna pattern does not change during the lifetime of an association
-{% if cap_vht %}
-vht_capab=
-{%- endif -%}
-
-{%- if cap_vht_max_mpdu -%}
-[MAX-MPDU-{{ cap_vht_max_mpdu }}]
-{%- endif -%}
-
-{%- if cap_vht_max_mpdu_exp -%}
-[MAX-A-MPDU-LEN-EXP{{ cap_vht_max_mpdu_exp }}]
-{%- endif -%}
-
-{%- if cap_vht_chan_set_width -%}
-{%- if '2' in cap_vht_chan_set_width -%}
-[VHT160]
-{%- elif '3' in cap_vht_chan_set_width -%}
-[VHT160-80PLUS80]
-{%- endif -%}
-{%- endif -%}
-
-{%- if cap_vht_stbc_tx -%}
-[TX-STBC-2BY1]
-{%- endif -%}
-
-{%- if cap_vht_stbc_rx -%}
-[RX-STBC-{{ cap_vht_stbc_rx }}]
-{%- endif -%}
-
-{%- if cap_vht_link_adaptation -%}
-{%- if 'unsolicited' in cap_vht_link_adaptation -%}
-[VHT-LINK-ADAPT2]
-{%- elif 'both' in cap_vht_link_adaptation -%}
-[VHT-LINK-ADAPT3]
-{%- endif -%}
-{%- endif -%}
-
-{%- if cap_vht_short_gi -%}
-{%- for gi in cap_vht_short_gi -%}
-[SHORT-GI-{{ gi }}]
-{%- endfor -%}
-{%- endif -%}
-
-{%- if cap_vht_ldpc -%}
-[RXLDPC]
-{%- endif -%}
-
-{%- if cap_vht_tx_powersave -%}
-[VHT-TXOP-PS]
-{%- endif -%}
-
-{%- if cap_vht_vht_cf -%}
-[HTC-VHT]
-{%- endif -%}
-
-{%- if cap_vht_beamform -%}
-{%- for beamform in cap_vht_beamform -%}
-{%- if 'single-user-beamformer' in beamform -%}
-[SU-BEAMFORMER]
-{%- elif 'single-user-beamformee' in beamform -%}
-[SU-BEAMFORMEE]
-{%- elif 'multi-user-beamformer' in beamform -%}
-[MU-BEAMFORMER]
-{%- elif 'multi-user-beamformee' in beamform -%}
-[MU-BEAMFORMEE]
-{%- endif -%}
-{%- endfor -%}
-{%- endif -%}
-
-{%- if cap_vht_antenna_fixed -%}
-[RX-ANTENNA-PATTERN][TX-ANTENNA-PATTERN]
-{%- endif -%}
-
-{%- if cap_vht_antenna_cnt -%}
-{%- if cap_vht_antenna_cnt|int > 1 -%}
-{%- if cap_vht_beamform -%}
-{%- for beamform in cap_vht_beamform -%}
-{%- if 'single-user-beamformer' in beamform -%}
-{%- if cap_vht_antenna_cnt|int < 6 -%}
-[BF-ANTENNA-{{ cap_vht_antenna_cnt|int -1 }}][SOUNDING-DIMENSION-{{ cap_vht_antenna_cnt|int -1}}]
-{%- endif -%}
-{%- else -%}
-{%- if cap_vht_antenna_cnt|int < 5 -%}
-[BF-ANTENNA-{{ cap_vht_antenna_cnt }}][SOUNDING-DIMENSION-{{ cap_vht_antenna_cnt }}]
-{%- endif -%}
-{%- endif -%}
-{%- endfor -%}
-{%- else -%}
-{%- if cap_vht_antenna_cnt|int < 5 -%}
-[BF-ANTENNA-{{ cap_vht_antenna_cnt }}][SOUNDING-DIMENSION-{{ cap_vht_antenna_cnt }}]
-{%- endif -%}
-{%- endif -%}
-{%- endif -%}
-{%- endif %}
+# 1 = Tx antenna pattern does not change during the lifetime of an
+
+{% if capabilities.vht.center_channel_freq.freq_1 is defined %}
+# center freq = 5 GHz + (5 * index)
+# So index 42 gives center freq 5.210 GHz
+# which is channel 42 in 5G band
+vht_oper_centr_freq_seg0_idx={{ capabilities.vht.center_channel_freq.freq_1 }}
+{% endif %}
+
+{% if capabilities.vht.center_channel_freq.freq_2 is defined %}
+# center freq = 5 GHz + (5 * index)
+# So index 159 gives center freq 5.795 GHz
+# which is channel 159 in 5G band
+vht_oper_centr_freq_seg1_idx={{ capabilities.vht.center_channel_freq.freq_2 }}
+{% endif %}
+
+{% if capabilities.vht.channel_set_width is defined %}
+vht_oper_chwidth={{ capabilities.vht.channel_set_width }}
+{% endif %}
+
+{% set output = '' %}
+{% set output = output + '[TX-STBC-2BY1]' if capabilities.vht.stbc.tx is defined else '' %}
+{% set output = output + '[RXLDPC]' if capabilities.vht.ldpc is defined else '' %}
+{% set output = output + '[VHT-TXOP-PS]' if capabilities.vht.tx_powersave is defined else '' %}
+{% set output = output + '[HTC-VHT]' if capabilities.vht.vht_cf is defined else '' %}
+{% set output = output + '[RX-ANTENNA-PATTERN]' if capabilities.vht.antenna_pattern_fixed is defined else '' %}
+{% set output = output + '[TX-ANTENNA-PATTERN]' if capabilities.vht.antenna_pattern_fixed is defined else '' %}
+
+{% set output = output + '[RX-STBC-' + capabilities.vht.stbc.rx + ']' if capabilities.vht.stbc.rx is defined else '' %}
+{% set output = output + '[MAX-MPDU-' + capabilities.vht.max_mpdu + ']' if capabilities.vht.max_mpdu is defined else '' %}
+{% set output = output + '[MAX-A-MPDU-LEN-EXP-' + capabilities.vht.max_mpdu_exp + ']' if capabilities.vht.max_mpdu_exp is defined else '' %}
+{% set output = output + '[MAX-A-MPDU-LEN-EXP-' + capabilities.vht.max_mpdu_exp + ']' if capabilities.vht.max_mpdu_exp is defined else '' %}
+
+{% set output = output + '[VHT160]' if capabilities.vht.max_mpdu_exp is defined and capabilities.vht.max_mpdu_exp == '2' else '' %}
+{% set output = output + '[VHT160-80PLUS80]' if capabilities.vht.max_mpdu_exp is defined and capabilities.vht.max_mpdu_exp == '3' else '' %}
+{% set output = output + '[VHT-LINK-ADAPT2]' if capabilities.vht.link_adaptation is defined and capabilities.vht.link_adaptation == 'unsolicited' else '' %}
+{% set output = output + '[VHT-LINK-ADAPT3]' if capabilities.vht.link_adaptation is defined and capabilities.vht.link_adaptation == 'both' else '' %}
+
+{% if capabilities.vht.short_gi is defined %}
+{% for short_gi in capabilities.vht.short_gi %}
+{% set output = output + '[SHORT-GI-' + short_gi | upper + ']' %}
+{% endfor %}
+{% endif %}
+
+{% if capabilities.vht.beamform %}
+{% for beamform in capabilities.vht.beamform %}
+{% set output = output + '[SU-BEAMFORMER]' if beamform == 'single-user-beamformer' else '' %}
+{% set output = output + '[SU-BEAMFORMEE]' if beamform == 'single-user-beamformee' else '' %}
+{% set output = output + '[MU-BEAMFORMER]' if beamform == 'multi-user-beamformer' else '' %}
+{% set output = output + '[MU-BEAMFORMEE]' if beamform == 'multi-user-beamformee' else '' %}
+{% endfor %}
+{% endif %}
+
+{% if capabilities.vht.antenna_count is defined and capabilities.vht.antenna_count|int > 1 %}
+{% if capabilities.vht.beamform %}
+{% if beamform == 'single-user-beamformer' %}
+{% if capabilities.vht.antenna_count is defined and capabilities.vht.antenna_count|int > 1 and capabilities.vht.antenna_count|int < 6 %}
+{% set output = output + '[BF-ANTENNA-' + capabilities.vht.antenna_count|int -1 + ']' %}
+{% set output = output + '[SOUNDING-DIMENSION-' + capabilities.vht.antenna_count|int -1 + ']' %}
+{% endif %}
+{% endif %}
+{% if capabilities.vht.antenna_count is defined and capabilities.vht.antenna_count|int > 1 and capabilities.vht.antenna_count|int < 5 %}
+{% set output = output + '[BF-ANTENNA-' + capabilities.vht.antenna_count + ']' %}
+{% set output = output + '[SOUNDING-DIMENSION-' + capabilities.vht.antenna_count+ ']' %}
+{% endif %}
+{% endif %}
+{% endif %}
+
+vht_capab={{ output }}
+{% endif %}
# ieee80211n: Whether IEEE 802.11n (HT) is enabled
# 0 = disabled (default)
# 1 = enabled
# Note: You will also need to enable WMM for full HT functionality.
# Note: hw_mode=g (2.4 GHz) and hw_mode=a (5 GHz) is used to specify the band.
-{% if cap_req_vht -%}
+{% if capabilities is defined and capabilities.require_vht is defined %}
ieee80211n=0
# Require stations to support VHT PHY (reject association if they do not)
require_vht=1
-{% else -%}
-{% if 'n' in mode or 'ac' in mode -%}
+{% else %}
+{% if 'n' in mode or 'ac' in mode %}
ieee80211n=1
-{% else -%}
+{% else %}
ieee80211n=0
-{%- endif %}
+{% endif %}
{% endif %}
-{% if cap_vht_center_freq_1 -%}
-# center freq = 5 GHz + (5 * index)
-# So index 42 gives center freq 5.210 GHz
-# which is channel 42 in 5G band
-vht_oper_centr_freq_seg0_idx={{ cap_vht_center_freq_1 }}
-{% endif %}
-
-{% if cap_vht_center_freq_2 -%}
-# center freq = 5 GHz + (5 * index)
-# So index 159 gives center freq 5.795 GHz
-# which is channel 159 in 5G band
-vht_oper_centr_freq_seg1_idx={{ cap_vht_center_freq_2 }}
-{% endif %}
-
-{% if disable_broadcast_ssid -%}
+{% if disable_broadcast_ssid is defined %}
# Send empty SSID in beacons and ignore probe request frames that do not
# specify full SSID, i.e., require stations to know SSID.
# default: disabled (0)
@@ -463,7 +393,7 @@ ignore_broadcast_ssid=1
# 2 = use external RADIUS server (accept/deny lists are searched first)
macaddr_acl=0
-{% if max_stations -%}
+{% if max_stations is defined %}
# Maximum number of stations allowed in station table. New stations will be
# rejected after the station table is full. IEEE 802.11 has a limit of 2007
# different association IDs, so this number should not be larger than that.
@@ -471,13 +401,13 @@ macaddr_acl=0
max_num_sta={{ max_stations }}
{% endif %}
-{% if isolate_stations -%}
+{% if isolate_stations is defined %}
# Client isolation can be used to prevent low-level bridging of frames between
# associated stations in the BSS. By default, this bridging is allowed.
ap_isolate=1
{% endif %}
-{% if reduce_transmit_power -%}
+{% if reduce_transmit_power is defined %}
# Add Power Constraint element to Beacon and Probe Response frames
# This config option adds Power Constraint element when applicable and Country
# element is added. Power Constraint element is required by Transmit Power
@@ -486,14 +416,15 @@ ap_isolate=1
local_pwr_constraint={{ reduce_transmit_power }}
{% endif %}
-{% if expunge_failing_stations -%}
+{% if expunge_failing_stations is defined %}
# Disassociate stations based on excessive transmission failures or other
# indications of connection loss. This depends on the driver capabilities and
# may not be available with all drivers.
disassoc_low_ack=1
{% endif %}
-{% if sec_wep -%}
+
+{% if security is defined and security.wep is defined %}
# IEEE 802.11 specifies two authentication algorithms. hostapd can be
# configured to allow both of these or only one. Open system authentication
# should be used with IEEE 802.1X.
@@ -522,13 +453,14 @@ wep_default_key=0
# digits, depending on whether 40-bit (64-bit), 104-bit (128-bit), or
# 128-bit (152-bit) WEP is used.
# Only the default key must be supplied; the others are optional.
-{% if sec_wep_key -%}
-{% for key in sec_wep_key -%}
-wep_key{{ loop.index -1 }}={{ key}}
-{% endfor %}
-{%- endif %}
+{% if security.wep.key is defined %}
+{% for key in sec_wep_key %}
+wep_key{{ loop.index -1 }}={{ security.wep.key }}
+{% endfor %}
+{% endif %}
-{% elif sec_wpa -%}
+
+{% elif security is defined and security.wpa is defined %}
##### WPA/IEEE 802.11i configuration ##########################################
# Enable WPA. Setting this variable configures the AP to require WPA (either
@@ -542,15 +474,17 @@ wep_key{{ loop.index -1 }}={{ key}}
# and/or WPA2 (full IEEE 802.11i/RSN):
# bit0 = WPA
# bit1 = IEEE 802.11i/RSN (WPA2) (dot11RSNAEnabled)
-{% if 'both' in sec_wpa_mode -%}
+{% if security.wpa.mode is defined %}
+{% if security.wpa.mode == 'both' %}
wpa=3
-{%- elif 'wpa2' in sec_wpa_mode -%}
+{% elif security.wpa.mode == 'wpa2' %}
wpa=2
-{%- elif 'wpa' in sec_wpa_mode -%}
+{% elif security.wpa.mode == 'wpa' %}
wpa=1
-{%- endif %}
+{% endif %}
+{% endif %}
-{% if sec_wpa_cipher -%}
+{% if security.wpa.cipher is defined %}
# Set of accepted cipher suites (encryption algorithms) for pairwise keys
# (unicast packets). This is a space separated list of algorithms:
# CCMP = AES in Counter mode with CBC-MAC (CCMP-128)
@@ -563,26 +497,39 @@ wpa=1
# allowed as the pairwise cipher, group cipher will also be CCMP. Otherwise,
# TKIP will be used as the group cipher. The optional group_cipher parameter can
# be used to override this automatic selection.
-{% if 'wpa2' in sec_wpa_mode -%}
+
+{% if security.wpa.mode is defined and security.wpa.mode == 'wpa2' %}
# Pairwise cipher for RSN/WPA2 (default: use wpa_pairwise value)
-rsn_pairwise={{ sec_wpa_cipher | join(" ") }}
-{% else -%}
+{% if security.wpa.cipher is string %}
+rsn_pairwise={{ security.wpa.cipher }}
+{% else %}
+rsn_pairwise={{ security.wpa.cipher | join(" ") }}
+{% endif %}
+{% else %}
# Pairwise cipher for WPA (v1) (default: TKIP)
-wpa_pairwise={{ sec_wpa_cipher | join(" ") }}
-{%- endif -%}
-{% endif %}
-
-{% if sec_wpa_group_cipher -%}
+{% if security.wpa.cipher is string %}
+wpa_pairwise={{ security.wpa.cipher }}
+{% else %}
+wpa_pairwise={{ security.wpa.cipher | join(" ") }}
+{% endif %}
+{% endif %}
+{% endif %}
+
+{% if security.wpa.group_cipher is defined %}
# Optional override for automatic group cipher selection
# This can be used to select a specific group cipher regardless of which
# pairwise ciphers were enabled for WPA and RSN. It should be noted that
# overriding the group cipher with an unexpected value can result in
# interoperability issues and in general, this parameter is mainly used for
# testing purposes.
-group_cipher={{ sec_wpa_group_cipher | join(" ") }}
-{% endif %}
-
-{% if sec_wpa_passphrase -%}
+{% if security.wpa.group_cipher is string %}
+group_cipher={{ security.wpa.group_cipher }}
+{% else %}
+group_cipher={{ security.wpa.group_cipher | join(" ") }}
+{% endif %}
+{% endif %}
+
+{% if security.wpa.passphrase is defined %}
# IEEE 802.11 specifies two authentication algorithms. hostapd can be
# configured to allow both of these or only one. Open system authentication
# should be used with IEEE 802.1X.
@@ -595,7 +542,7 @@ auth_algs=1
# secret in hex format (64 hex digits), wpa_psk, or as an ASCII passphrase
# (8..63 characters) that will be converted to PSK. This conversion uses SSID
# so the PSK changes when ASCII passphrase is used and the SSID is changed.
-wpa_passphrase={{ sec_wpa_passphrase }}
+wpa_passphrase={{ security.wpa.passphrase }}
# Set of accepted key management algorithms (WPA-PSK, WPA-EAP, or both). The
# entries are separated with a space. WPA-PSK-SHA256 and WPA-EAP-SHA256 can be
@@ -604,7 +551,7 @@ wpa_passphrase={{ sec_wpa_passphrase }}
# WPA-PSK-SHA256 = WPA2-Personal using SHA256
wpa_key_mgmt=WPA-PSK
-{% elif sec_wpa_radius -%}
+{% elif security.wpa.radius is defined %}
##### IEEE 802.1X-2004 related configuration ##################################
# Require IEEE 802.1X authorization
ieee8021x=1
@@ -616,40 +563,37 @@ ieee8021x=1
# WPA-EAP-SHA256 = WPA2-Enterprise using SHA256
wpa_key_mgmt=WPA-EAP
-{% if sec_wpa_radius_source -%}
+{% if security.wpa.radius.server is defined %}
# RADIUS client forced local IP address for the access point
# Normally the local IP address is determined automatically based on configured
# IP addresses, but this field can be used to force a specific address to be
# used, e.g., when the device has multiple IP addresses.
-radius_client_addr={{ sec_wpa_radius_source }}
-
-# The own IP address of the access point (used as NAS-IP-Address)
-own_ip_addr={{ sec_wpa_radius_source }}
-{% else %}
# The own IP address of the access point (used as NAS-IP-Address)
+{% if security.wpa.radius.source_address is defined %}
+radius_client_addr={{ security.wpa.radius.source_address }}
+own_ip_addr={{ security.wpa.radius.source_address }}
+{% else %}
own_ip_addr=127.0.0.1
-{% endif %}
+{% endif %}
-{% for radius in sec_wpa_radius -%}
-{%- if not radius.disabled -%}
+{% for radius in security.wpa.radius.server if not radius.disabled %}
# RADIUS authentication server
auth_server_addr={{ radius.server }}
auth_server_port={{ radius.port }}
auth_server_shared_secret={{ radius.key }}
-{% if radius.acc_port -%}
+
+{% if radius.acc_port %}
# RADIUS accounting server
acct_server_addr={{ radius.server }}
acct_server_port={{ radius.acc_port }}
acct_server_shared_secret={{ radius.key }}
-{% endif %}
-{% endif %}
-{% endfor %}
-
-{% endif %}
-
-{% else %}
+{% endif %}
+{% endfor %}
+{% else %}
# Open system
auth_algs=1
+{% endif %}
+{% endif %}
{% endif %}
# TX queue parameters (EDCF / bursting)
diff --git a/data/templates/wifi/wpa_supplicant.conf.tmpl b/data/templates/wifi/wpa_supplicant.conf.tmpl
index 2784883f1..9ddad35fd 100644
--- a/data/templates/wifi/wpa_supplicant.conf.tmpl
+++ b/data/templates/wifi/wpa_supplicant.conf.tmpl
@@ -1,8 +1,8 @@
# WPA supplicant config
network={
ssid="{{ ssid }}"
-{%- if sec_wpa_passphrase %}
- psk="{{ sec_wpa_passphrase }}"
+{% if security is defined and security.wpa is defined and security.wpa.passphrase is defined %}
+ psk="{{ security.wpa.passphrase }}"
{% else %}
key_mgmt=NONE
{% endif %}
diff --git a/interface-definitions/include/accel-radius-additions.xml.in b/interface-definitions/include/accel-radius-additions.xml.in
index 227a043cd..e37b68514 100644
--- a/interface-definitions/include/accel-radius-additions.xml.in
+++ b/interface-definitions/include/accel-radius-additions.xml.in
@@ -2,6 +2,18 @@
<children>
<tagNode name="server">
<children>
+ <leafNode name="acct-port">
+ <properties>
+ <help>Accounting port</help>
+ <valueHelp>
+ <format>1-65535</format>
+ <description>Numeric IP port (default: 1813)</description>
+ </valueHelp>
+ <constraint>
+ <validator name="numeric" argument="--range 1-65535"/>
+ </constraint>
+ </properties>
+ </leafNode>
<leafNode name="fail-time">
<properties>
<help>Mark server unavailable for &lt;n&gt; seconds on failure</help>
diff --git a/interface-definitions/include/bgp-afi-aggregate-address.xml.i b/interface-definitions/include/bgp-afi-aggregate-address.xml.i
index 40c030fc1..050ee0074 100644
--- a/interface-definitions/include/bgp-afi-aggregate-address.xml.i
+++ b/interface-definitions/include/bgp-afi-aggregate-address.xml.i
@@ -1,12 +1,12 @@
-<leafNode name="as-set">
- <properties>
- <help>Generate AS-set path information for this aggregate address</help>
- <valueless/>
- </properties>
-</leafNode>
-<leafNode name="summary-only">
- <properties>
- <help>Announce the aggregate summary network only</help>
- <valueless/>
- </properties>
-</leafNode>
+<leafNode name="as-set">
+ <properties>
+ <help>Generate AS-set path information for this aggregate address</help>
+ <valueless/>
+ </properties>
+</leafNode>
+<leafNode name="summary-only">
+ <properties>
+ <help>Announce the aggregate summary network only</help>
+ <valueless/>
+ </properties>
+</leafNode>
diff --git a/interface-definitions/include/interface-arp-cache-timeout.xml.i b/interface-definitions/include/interface-arp-cache-timeout.xml.i
index 81d35f593..e65321158 100644
--- a/interface-definitions/include/interface-arp-cache-timeout.xml.i
+++ b/interface-definitions/include/interface-arp-cache-timeout.xml.i
@@ -10,4 +10,5 @@
</constraint>
<constraintErrorMessage>ARP cache entry timeout must be between 1 and 86400 seconds</constraintErrorMessage>
</properties>
+ <defaultValue>30</defaultValue>
</leafNode>
diff --git a/interface-definitions/include/nat-rule.xml.i b/interface-definitions/include/nat-rule.xml.i
index f62a08987..a2d058479 100644
--- a/interface-definitions/include/nat-rule.xml.i
+++ b/interface-definitions/include/nat-rule.xml.i
@@ -2,13 +2,13 @@
<properties>
<help>Rule number for NAT</help>
<valueHelp>
- <format>1-9999</format>
+ <format>1-999999</format>
<description>Number for this NAT rule</description>
</valueHelp>
<constraint>
- <validator name="numeric" argument="--range 1-9999"/>
+ <validator name="numeric" argument="--range 1-999999"/>
</constraint>
- <constraintErrorMessage>NAT rule number must be between 1 and 9999</constraintErrorMessage>
+ <constraintErrorMessage>NAT rule number must be between 1 and 999999</constraintErrorMessage>
</properties>
<children>
<leafNode name="description">
diff --git a/interface-definitions/interfaces-bonding.xml.in b/interface-definitions/interfaces-bonding.xml.in
index ddd52979b..7d658f6a0 100644
--- a/interface-definitions/interfaces-bonding.xml.in
+++ b/interface-definitions/interfaces-bonding.xml.in
@@ -78,6 +78,7 @@
</constraint>
<constraintErrorMessage>hash-policy must be layer2 layer2+3 or layer3+4</constraintErrorMessage>
</properties>
+ <defaultValue>layer2</defaultValue>
</leafNode>
<node name="ip">
<children>
@@ -137,6 +138,7 @@
</constraint>
<constraintErrorMessage>mode must be 802.3ad, active-backup, broadcast, round-robin, transmit-load-balance, adaptive-load-balance, or xor</constraintErrorMessage>
</properties>
+ <defaultValue>802.3ad</defaultValue>
</leafNode>
<node name="member">
<properties>
diff --git a/interface-definitions/interfaces-bridge.xml.in b/interface-definitions/interfaces-bridge.xml.in
index 6b610e623..92356d696 100644
--- a/interface-definitions/interfaces-bridge.xml.in
+++ b/interface-definitions/interfaces-bridge.xml.in
@@ -32,6 +32,7 @@
<validator name="numeric" argument="--range 0-0 --range 10-1000000"/>
</constraint>
</properties>
+ <defaultValue>300</defaultValue>
</leafNode>
#include <include/interface-description.xml.i>
#include <include/dhcp-options.xml.i>
@@ -51,6 +52,7 @@
</constraint>
<constraintErrorMessage>Forwarding delay must be between 0 and 200 seconds</constraintErrorMessage>
</properties>
+ <defaultValue>14</defaultValue>
</leafNode>
<leafNode name="hello-time">
<properties>
@@ -64,6 +66,7 @@
</constraint>
<constraintErrorMessage>Bridge Hello interval must be between 1 and 10 seconds</constraintErrorMessage>
</properties>
+ <defaultValue>2</defaultValue>
</leafNode>
<node name="igmp">
<properties>
@@ -107,6 +110,7 @@
</constraint>
<constraintErrorMessage>Bridge max aging value must be between 1 and 40 seconds</constraintErrorMessage>
</properties>
+ <defaultValue>20</defaultValue>
</leafNode>
<node name="member">
<properties>
@@ -133,6 +137,7 @@
</constraint>
<constraintErrorMessage>Path cost value must be between 1 and 65535</constraintErrorMessage>
</properties>
+ <defaultValue>100</defaultValue>
</leafNode>
<leafNode name="priority">
<properties>
@@ -146,6 +151,7 @@
</constraint>
<constraintErrorMessage>Port priority value must be between 0 and 63</constraintErrorMessage>
</properties>
+ <defaultValue>32</defaultValue>
</leafNode>
</children>
</tagNode>
@@ -163,6 +169,7 @@
</constraint>
<constraintErrorMessage>Bridge priority must be between 0 and 65535 (multiples of 4096)</constraintErrorMessage>
</properties>
+ <defaultValue>32768</defaultValue>
</leafNode>
<leafNode name="stp">
<properties>
diff --git a/interface-definitions/interfaces-ethernet.xml.in b/interface-definitions/interfaces-ethernet.xml.in
index 1e32a15f8..e8f3f09f1 100644
--- a/interface-definitions/interfaces-ethernet.xml.in
+++ b/interface-definitions/interfaces-ethernet.xml.in
@@ -56,6 +56,7 @@
</constraint>
<constraintErrorMessage>duplex must be auto, half or full</constraintErrorMessage>
</properties>
+ <defaultValue>auto</defaultValue>
</leafNode>
#include <include/interface-hw-id.xml.i>
<node name="ip">
@@ -265,6 +266,7 @@
</constraint>
<constraintErrorMessage>Speed must be auto, 10, 100, 1000, 2500, 5000, 10000, 25000, 40000, 50000 or 100000</constraintErrorMessage>
</properties>
+ <defaultValue>auto</defaultValue>
</leafNode>
#include <include/vif-s.xml.i>
#include <include/vif.xml.i>
diff --git a/interface-definitions/interfaces-l2tpv3.xml.in b/interface-definitions/interfaces-l2tpv3.xml.in
index 30dd9b604..3a878ad76 100644
--- a/interface-definitions/interfaces-l2tpv3.xml.in
+++ b/interface-definitions/interfaces-l2tpv3.xml.in
@@ -29,6 +29,7 @@
<validator name="numeric" argument="--range 1-65535"/>
</constraint>
</properties>
+ <defaultValue>5000</defaultValue>
</leafNode>
#include <include/interface-disable.xml.i>
<leafNode name="encapsulation">
@@ -50,6 +51,7 @@
</constraint>
<constraintErrorMessage>Encapsulation must be UDP or IP</constraintErrorMessage>
</properties>
+ <defaultValue>udp</defaultValue>
</leafNode>
<node name="ipv6">
<children>
@@ -138,6 +140,7 @@
<validator name="numeric" argument="--range 1-65535"/>
</constraint>
</properties>
+ <defaultValue>5000</defaultValue>
</leafNode>
<leafNode name="tunnel-id">
<properties>
diff --git a/interface-definitions/interfaces-pseudo-ethernet.xml.in b/interface-definitions/interfaces-pseudo-ethernet.xml.in
index d5f9ca661..4382db598 100644
--- a/interface-definitions/interfaces-pseudo-ethernet.xml.in
+++ b/interface-definitions/interfaces-pseudo-ethernet.xml.in
@@ -70,7 +70,9 @@
</constraint>
<constraintErrorMessage>mode must be private, vepa, bridge or passthru</constraintErrorMessage>
</properties>
+ <defaultValue>private</defaultValue>
</leafNode>
+ #include <include/interface-mtu-68-9000.xml.i>
#include <include/vif-s.xml.i>
#include <include/vif.xml.i>
</children>
diff --git a/interface-definitions/interfaces-vxlan.xml.in b/interface-definitions/interfaces-vxlan.xml.in
index bd3ab4022..8529f6885 100644
--- a/interface-definitions/interfaces-vxlan.xml.in
+++ b/interface-definitions/interfaces-vxlan.xml.in
@@ -93,6 +93,7 @@
<validator name="numeric" argument="--range 1-65535"/>
</constraint>
</properties>
+ <defaultValue>8472</defaultValue>
</leafNode>
<leafNode name="vni">
<properties>
diff --git a/interface-definitions/interfaces-wireguard.xml.in b/interface-definitions/interfaces-wireguard.xml.in
index 5894f159d..981bce826 100644
--- a/interface-definitions/interfaces-wireguard.xml.in
+++ b/interface-definitions/interfaces-wireguard.xml.in
@@ -30,9 +30,10 @@
<description>value which marks the packet for QoS/shaper</description>
</valueHelp>
<constraint>
- <validator name="numeric" argument="--range 1-255"/>
+ <validator name="numeric" argument="--range 0-4294967295"/>
</constraint>
</properties>
+ <defaultValue>0</defaultValue>
</leafNode>
<leafNode name="private-key">
<properties>
@@ -41,6 +42,7 @@
<script>${vyos_op_scripts_dir}/wireguard.py --listkdir</script>
</completionHelp>
</properties>
+ <defaultValue>default</defaultValue>
</leafNode>
<tagNode name="peer">
<properties>
@@ -103,7 +105,11 @@
#include <include/port-number.xml.i>
<leafNode name="persistent-keepalive">
<properties>
- <help>how often send keep alives in seconds</help>
+ <help>Interval to send keepalive messages</help>
+ <valueHelp>
+ <format>1-65535</format>
+ <description>Interval in seconds</description>
+ </valueHelp>
<constraint>
<validator name="numeric" argument="--range 1-65535"/>
</constraint>
diff --git a/interface-definitions/interfaces-wireless.xml.in b/interface-definitions/interfaces-wireless.xml.in
index 06c7734f5..6f0ec9e71 100644
--- a/interface-definitions/interfaces-wireless.xml.in
+++ b/interface-definitions/interfaces-wireless.xml.in
@@ -320,7 +320,7 @@
<properties>
<help>VHT link adaptation capabilities</help>
<completionHelp>
- <list>unsolicited both</list>
+ <list>unsolicited both</list>
</completionHelp>
<valueHelp>
<format>unsolicited</format>
@@ -451,6 +451,7 @@
<leafNode name="disable-broadcast-ssid">
<properties>
<help>Disable broadcast of SSID from access-point</help>
+ <valueless/>
</properties>
</leafNode>
#include <include/interface-disable-link-detect.xml.i>
@@ -551,9 +552,10 @@
<description>802.11ac - 1300 Mbits/sec</description>
</valueHelp>
<constraint>
- <regex>(a|b|g|n|ac)</regex>
+ <regex>^(a|b|g|n|ac)$</regex>
</constraint>
</properties>
+ <defaultValue>g</defaultValue>
</leafNode>
<leafNode name="physical-device">
<properties>
@@ -637,7 +639,7 @@
<description>Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]</description>
</valueHelp>
<constraint>
- <regex>(GCMP-256|GCMP|CCMP-256|CCMP|TKIP)</regex>
+ <regex>^(GCMP-256|GCMP|CCMP-256|CCMP|TKIP)$</regex>
</constraint>
<constraintErrorMessage>Invalid cipher selection</constraintErrorMessage>
<multi/>
@@ -670,7 +672,7 @@
<description>Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]</description>
</valueHelp>
<constraint>
- <regex>(GCMP-256|GCMP|CCMP-256|CCMP|TKIP)</regex>
+ <regex>^(GCMP-256|GCMP|CCMP-256|CCMP|TKIP)$</regex>
</constraint>
<constraintErrorMessage>Invalid group cipher selection</constraintErrorMessage>
<multi/>
@@ -695,7 +697,7 @@
<description>Allow both WPA and WPA2</description>
</valueHelp>
<constraint>
- <regex>(wpa|wpa2|both)</regex>
+ <regex>^(wpa|wpa2|both)$</regex>
</constraint>
<constraintErrorMessage>Unknown WPA mode</constraintErrorMessage>
</properties>
@@ -762,10 +764,11 @@
<description>Passively monitor all packets on the frequency/channel</description>
</valueHelp>
<constraint>
- <regex>(access-point|station|monitor)</regex>
+ <regex>^(access-point|station|monitor)$</regex>
</constraint>
<constraintErrorMessage>Type must be access-point, station or monitor</constraintErrorMessage>
</properties>
+ <defaultValue>monitor</defaultValue>
</leafNode>
#include <include/vif.xml.i>
#include <include/vif-s.xml.i>
diff --git a/interface-definitions/lldp.xml.in b/interface-definitions/lldp.xml.in
index 3a2899b57..8f6629d81 100644
--- a/interface-definitions/lldp.xml.in
+++ b/interface-definitions/lldp.xml.in
@@ -21,6 +21,7 @@
</valueHelp>
<completionHelp>
<script>${vyatta_sbindir}/vyatta-interfaces.pl --show all</script>
+ <list>all</list>
</completionHelp>
</properties>
<children>
@@ -73,7 +74,7 @@
</completionHelp>
<constraintErrorMessage>Datum should be WGS84, NAD83, or MLLW</constraintErrorMessage>
<constraint>
- <regex>(WGS84|NAD83|MLLW)$</regex>
+ <regex>^(WGS84|NAD83|MLLW)$</regex>
</constraint>
</properties>
</leafNode>
diff --git a/interface-definitions/nat.xml.in b/interface-definitions/nat.xml.in
index f8415b7c0..8a14f4d25 100644
--- a/interface-definitions/nat.xml.in
+++ b/interface-definitions/nat.xml.in
@@ -61,13 +61,13 @@
<properties>
<help>NPTv6 rule number</help>
<valueHelp>
- <format>1-9999</format>
+ <format>1-999999</format>
<description>Number for this rule</description>
</valueHelp>
<constraint>
- <validator name="numeric" argument="--range 1-9999"/>
+ <validator name="numeric" argument="--range 1-999999"/>
</constraint>
- <constraintErrorMessage>NAT rule number must be between 1 and 9999</constraintErrorMessage>
+ <constraintErrorMessage>NAT rule number must be between 1 and 999999</constraintErrorMessage>
</properties>
<children>
<leafNode name="description">
diff --git a/interface-definitions/protocols-bfd.xml.in b/interface-definitions/protocols-bfd.xml.in
index 62e2c87b9..8900e7955 100644
--- a/interface-definitions/protocols-bfd.xml.in
+++ b/interface-definitions/protocols-bfd.xml.in
@@ -28,7 +28,7 @@
<children>
<node name="source">
<properties>
- <help>Bind listener to specifid interface/address, mandatory for IPv6</help>
+ <help>Bind listener to specified interface/address, mandatory for IPv6</help>
</properties>
<children>
<leafNode name="interface">
diff --git a/interface-definitions/mdns-repeater.xml.in b/interface-definitions/service_mdns-repeater.xml.in
index a59321294..e21b1b27c 100644
--- a/interface-definitions/mdns-repeater.xml.in
+++ b/interface-definitions/service_mdns-repeater.xml.in
@@ -1,5 +1,4 @@
<?xml version="1.0"?>
-<!-- mDNS repeater configuration -->
<interfaceDefinition>
<node name="service">
<children>
@@ -8,7 +7,7 @@
<help>Multicast DNS (mDNS) parameters</help>
</properties>
<children>
- <node name="repeater" owner="${vyos_conf_scripts_dir}/mdns_repeater.py">
+ <node name="repeater" owner="${vyos_conf_scripts_dir}/service_mdns-repeater.py">
<properties>
<help>mDNS repeater configuration</help>
<priority>990</priority>
diff --git a/interface-definitions/service_router-advert.xml.in b/interface-definitions/service_router-advert.xml.in
index 6a4706ab7..5a472fc9a 100644
--- a/interface-definitions/service_router-advert.xml.in
+++ b/interface-definitions/service_router-advert.xml.in
@@ -32,6 +32,7 @@
</constraint>
<constraintErrorMessage>Hop count must be between 0 and 255</constraintErrorMessage>
</properties>
+ <defaultValue>64</defaultValue>
</leafNode>
<leafNode name="default-lifetime">
<properties>
@@ -69,10 +70,11 @@
<description>Default router has high preference</description>
</valueHelp>
<constraint>
- <regex>(low|medium|high)</regex>
+ <regex>^(low|medium|high)$</regex>
</constraint>
<constraintErrorMessage>Default preference must be low, medium or high</constraintErrorMessage>
</properties>
+ <defaultValue>medium</defaultValue>
</leafNode>
<leafNode name="dnssl">
<properties>
@@ -116,6 +118,7 @@
</constraint>
<constraintErrorMessage>Maximum interval must be between 4 and 1800 seconds</constraintErrorMessage>
</properties>
+ <defaultValue>600</defaultValue>
</leafNode>
<leafNode name="min">
<properties>
@@ -191,9 +194,10 @@
</valueHelp>
<constraint>
<validator name="numeric" argument="--range 0-4294967295"/>
- <regex>(infinity)</regex>
+ <regex>^(infinity)$</regex>
</constraint>
</properties>
+ <defaultValue>14400</defaultValue>
</leafNode>
<leafNode name="valid-lifetime">
<properties>
@@ -214,6 +218,7 @@
<regex>(infinity)</regex>
</constraint>
</properties>
+ <defaultValue>2592000</defaultValue>
</leafNode>
</children>
</tagNode>
@@ -233,6 +238,7 @@
</constraint>
<constraintErrorMessage>Reachable time must be 0 or between 1 and 3600000 milliseconds</constraintErrorMessage>
</properties>
+ <defaultValue>0</defaultValue>
</leafNode>
<leafNode name="retrans-timer">
<properties>
@@ -250,6 +256,7 @@
</constraint>
<constraintErrorMessage>Retransmit interval must be 0 or between 1 and 4294967295 milliseconds</constraintErrorMessage>
</properties>
+ <defaultValue>0</defaultValue>
</leafNode>
<leafNode name="no-send-advert">
<properties>
diff --git a/interface-definitions/system-lcd.xml.in b/interface-definitions/system-lcd.xml.in
new file mode 100644
index 000000000..ad59acb6b
--- /dev/null
+++ b/interface-definitions/system-lcd.xml.in
@@ -0,0 +1,62 @@
+<?xml version="1.0"?>
+<interfaceDefinition>
+ <node name="system">
+ <children>
+ <node name="lcd" owner="${vyos_conf_scripts_dir}/system_lcd.py">
+ <properties>
+ <help>System LCD display</help>
+ <priority>100</priority>
+ </properties>
+ <children>
+ <leafNode name="model">
+ <properties>
+ <help>Model of the display attached to this system [REQUIRED]</help>
+ <completionHelp>
+ <list>CFA-533 CFA-631 CFA-633 CFA-635</list>
+ </completionHelp>
+ <valueHelp>
+ <format>CFA-533</format>
+ <description>Crystalfontz CFA-533</description>
+ </valueHelp>
+ <valueHelp>
+ <format>CFA-631</format>
+ <description>Crystalfontz CFA-631</description>
+ </valueHelp>
+ <valueHelp>
+ <format>CFA-633</format>
+ <description>Crystalfontz CFA-633</description>
+ </valueHelp>
+ <valueHelp>
+ <format>CFA-635</format>
+ <description>Crystalfontz CFA-635</description>
+ </valueHelp>
+ <constraint>
+ <regex>^(CFA-533|CFA-631|CFA-633|CFA-635)$</regex>
+ </constraint>
+ </properties>
+ </leafNode>
+ <leafNode name="device">
+ <properties>
+ <help>Physical device used by LCD display</help>
+ <completionHelp>
+ <script>ls -1 /dev | grep ttyS</script>
+ <script>if [ -d /dev/serial/by-bus ]; then ls -1 /dev/serial/by-bus; fi</script>
+ </completionHelp>
+ <valueHelp>
+ <format>ttySXX</format>
+ <description>TTY device name, regular serial port</description>
+ </valueHelp>
+ <valueHelp>
+ <format>usbNbXpY</format>
+ <description>TTY device name, USB based</description>
+ </valueHelp>
+ <constraint>
+ <regex>^(ttyS[0-9]+|usb[0-9]+b.*)$</regex>
+ </constraint>
+ </properties>
+ </leafNode>
+ </children>
+ </node>
+ </children>
+ </node>
+</interfaceDefinition>
diff --git a/interface-definitions/system-options.xml.in b/interface-definitions/system-options.xml.in
index 194773329..a5fec10db 100644
--- a/interface-definitions/system-options.xml.in
+++ b/interface-definitions/system-options.xml.in
@@ -46,13 +46,21 @@
</leafNode>
<node name="http-client">
<properties>
- <help>Global options used for HTTP based commands</help>
+ <help>Global options used for HTTP client</help>
</properties>
<children>
#include <include/source-interface.xml.i>
#include <include/source-address-ipv4-ipv6.xml.i>
</children>
</node>
+ <node name="ssh-client">
+ <properties>
+ <help>Global options used for SSH client</help>
+ </properties>
+ <children>
+ #include <include/source-address-ipv4-ipv6.xml.i>
+ </children>
+ </node>
</children>
</node>
</children>
diff --git a/op-mode-definitions/add-system-image.xml b/op-mode-definitions/add-system-image.xml
new file mode 100644
index 000000000..3dc1c67ab
--- /dev/null
+++ b/op-mode-definitions/add-system-image.xml
@@ -0,0 +1,62 @@
+<?xml version="1.0"?>
+<interfaceDefinition>
+ <node name="add">
+ <children>
+ <node name="system">
+ <properties>
+ <help>Add item to a system facility</help>
+ </properties>
+ <children>
+ <tagNode name="image">
+ <properties>
+ <help>Add a new image to the system</help>
+ <completionHelp>
+ <list>/path/to/vyos-image.iso http://example.com/vyos-image.iso</list>
+ </completionHelp>
+ </properties>
+ <command>sudo ${vyatta_sbindir}/install-image --url "${4}"</command>
+ <children>
+ <tagNode name="vrf">
+ <properties>
+ <help>Download image via specified VRF</help>
+ <completionHelp>
+ <path>vrf name</path>
+ </completionHelp>
+ </properties>
+ <command>sudo ${vyatta_sbindir}/install-image --url "${4}" --vrf "${6}"</command>
+ <children>
+ <tagNode name="username">
+ <properties>
+ <help>Username for authentication</help>
+ </properties>
+ <children>
+ <tagNode name="password">
+ <properties>
+ <help>Password to use with authentication</help>
+ </properties>
+ <command>sudo ${vyatta_sbindir}/install-image --url "${4}" --vrf "${6}" --username "${8}" --password "${10}"</command>
+ </tagNode>
+ </children>
+ </tagNode>
+ </children>
+ </tagNode>
+ <tagNode name="username">
+ <properties>
+ <help>Username for authentication</help>
+ </properties>
+ <children>
+ <tagNode name="password">
+ <properties>
+ <help>Password to use with authentication</help>
+ </properties>
+ <command>sudo ${vyatta_sbindir}/install-image --url "${4}" --username "${6}" --password "${8}"</command>
+ </tagNode>
+ </children>
+ </tagNode>
+ </children>
+ </tagNode>
+ </children>
+ </node>
+ </children>
+ </node>
+</interfaceDefinition>
diff --git a/op-mode-definitions/configure.xml b/op-mode-definitions/configure.xml
new file mode 100644
index 000000000..3dd5a0f45
--- /dev/null
+++ b/op-mode-definitions/configure.xml
@@ -0,0 +1,24 @@
+<?xml version="1.0"?>
+<interfaceDefinition>
+ <node name="configure">
+ <properties>
+ <help>Enter configuration mode</help>
+ </properties>
+ <command>if [ `id -u` == 0 ]; then
+ echo "You are attempting to enter configuration mode as root."
+ echo "It may have unintended consequences and render your system"
+ echo "unusable until restart."
+ echo "Please do it as an administrator level VyOS user instead."
+ else
+ if grep -q -e '^overlay.*/filesystem.squashfs' /proc/mounts; then
+ echo "WARNING: You are currently configuring a live-ISO environment, changes will not persist until installed"
+ fi
+ history -w
+ export _OFR_CONFIGURE=ok
+ newgrp vyattacfg
+ unset _OFR_CONFIGURE
+ _vyatta_op_do_key_bindings
+ history -r
+ fi</command>
+ </node>
+</interfaceDefinition>
diff --git a/op-mode-definitions/connect-disconnect.xml b/op-mode-definitions/connect.xml
index f0fcef5da..1ec62949a 100644
--- a/op-mode-definitions/connect-disconnect.xml
+++ b/op-mode-definitions/connect.xml
@@ -2,35 +2,27 @@
<interfaceDefinition>
<node name="connect">
<properties>
- <help>Establish a connection</help>
+ <help>Establish connection</help>
</properties>
<children>
- <tagNode name="interface">
+ <tagNode name="console">
<properties>
- <help>Bring up a connection-oriented network interface</help>
+ <help>Connect to device attached to serial console server</help>
<completionHelp>
- <path>interfaces pppoe</path>
- <path>interfaces wirelessmodem</path>
+ <path>service console-server device</path>
</completionHelp>
</properties>
- <command>sudo ${vyos_op_scripts_dir}/connect_disconnect.py --connect "$3"</command>
+ <command>/usr/bin/console "$3"</command>
</tagNode>
- </children>
- </node>
- <node name="disconnect">
- <properties>
- <help>Take down a connection</help>
- </properties>
- <children>
<tagNode name="interface">
<properties>
- <help>Take down a connection-oriented network interface</help>
+ <help>Bring up a connection-oriented network interface</help>
<completionHelp>
<path>interfaces pppoe</path>
<path>interfaces wirelessmodem</path>
</completionHelp>
</properties>
- <command>sudo ${vyos_op_scripts_dir}/connect_disconnect.py --disconnect "$3"</command>
+ <command>sudo ${vyos_op_scripts_dir}/connect_disconnect.py --connect "$3"</command>
</tagNode>
</children>
</node>
diff --git a/op-mode-definitions/disconnect.xml b/op-mode-definitions/disconnect.xml
new file mode 100644
index 000000000..bf2c37b89
--- /dev/null
+++ b/op-mode-definitions/disconnect.xml
@@ -0,0 +1,20 @@
+<?xml version="1.0"?>
+<interfaceDefinition>
+ <node name="disconnect">
+ <properties>
+ <help>Take down a connection</help>
+ </properties>
+ <children>
+ <tagNode name="interface">
+ <properties>
+ <help>Take down a connection-oriented network interface</help>
+ <completionHelp>
+ <path>interfaces pppoe</path>
+ <path>interfaces wirelessmodem</path>
+ </completionHelp>
+ </properties>
+ <command>sudo ${vyos_op_scripts_dir}/connect_disconnect.py --disconnect "$3"</command>
+ </tagNode>
+ </children>
+ </node>
+</interfaceDefinition>
diff --git a/op-mode-definitions/force-arp.xml b/op-mode-definitions/force-arp.xml
index 3eadabf0a..c7bcad413 100644
--- a/op-mode-definitions/force-arp.xml
+++ b/op-mode-definitions/force-arp.xml
@@ -27,13 +27,13 @@
<properties>
<help>Send gratuitous ARP reply for specified address</help>
</properties>
- <command>sudo arping -I $5 -c 1 -A $7</command>
+ <command>sudo /usr/bin/arping -I $5 -c 1 -A $7</command>
<children>
<tagNode name="count">
<properties>
<help>Send specified number of ARP replies</help>
</properties>
- <command>sudo arping -I $5 -c $9 -A $7</command>
+ <command>sudo /usr/bin/arping -I $5 -c $9 -A $7</command>
</tagNode>
</children>
</tagNode>
@@ -58,13 +58,13 @@
<properties>
<help>Send gratuitous ARP request for specified address</help>
</properties>
- <command>sudo arping -I $5 -c 1 -U $7</command>
+ <command>sudo /usr/bin/arping -I $5 -c 1 -U $7</command>
<children>
<tagNode name="count">
<properties>
<help>Send specified number of ARP requests</help>
</properties>
- <command>sudo arping -I $5 -c $9 -U $7</command>
+ <command>sudo /usr/bin/arping -I $5 -c $9 -U $7</command>
</tagNode>
</children>
</tagNode>
diff --git a/op-mode-definitions/force-ipv6-nd.xml b/op-mode-definitions/force-ipv6-nd.xml
new file mode 100644
index 000000000..49de097f6
--- /dev/null
+++ b/op-mode-definitions/force-ipv6-nd.xml
@@ -0,0 +1,33 @@
+<?xml version="1.0"?>
+<interfaceDefinition>
+ <node name="force">
+ <children>
+ <node name="ipv6-nd">
+ <properties>
+ <help>IPv6 Neighbor Discovery</help>
+ </properties>
+ <children>
+ <tagNode name="interface">
+ <properties>
+ <help>IPv6 Neighbor Discovery on specified interface</help>
+ <completionHelp>
+ <script>${vyos_completion_dir}/list_interfaces.py</script>
+ </completionHelp>
+ </properties>
+ <children>
+ <tagNode name="address">
+ <properties>
+ <help>IPv6 address of node to lookup</help>
+ <completionHelp>
+ <list>&lt;h:h:h:h:h:h:h:h&gt;</list>
+ </completionHelp>
+ </properties>
+ <command>/usr/bin/ndisc6 -m "$6" "$4"</command>
+ </tagNode>
+ </children>
+ </tagNode>
+ </children>
+ </node>
+ </children>
+ </node>
+</interfaceDefinition>
diff --git a/op-mode-definitions/force-ipv6-rd.xml b/op-mode-definitions/force-ipv6-rd.xml
new file mode 100644
index 000000000..8c901af25
--- /dev/null
+++ b/op-mode-definitions/force-ipv6-rd.xml
@@ -0,0 +1,34 @@
+<?xml version="1.0"?>
+<interfaceDefinition>
+ <node name="force">
+ <children>
+ <node name="ipv6-rd">
+ <properties>
+ <help>IPv6 Router Discovery</help>
+ </properties>
+ <children>
+ <tagNode name="interface">
+ <properties>
+ <help>IPv6 Router Discovery on specified interface</help>
+ <completionHelp>
+ <script>${vyos_completion_dir}/list_interfaces.py</script>
+ </completionHelp>
+ </properties>
+ <command>/usr/bin/rdisc6 "$4"</command>
+ <children>
+ <tagNode name="address">
+ <properties>
+ <help>IPv6 address of target</help>
+ <completionHelp>
+ <list>&lt;h:h:h:h:h:h:h:h&gt;</list>
+ </completionHelp>
+ </properties>
+ <command>/usr/bin/rdisc6 -m "$6" "$4"</command>
+ </tagNode>
+ </children>
+ </tagNode>
+ </children>
+ </node>
+ </children>
+ </node>
+</interfaceDefinition>
diff --git a/op-mode-definitions/lldp.xml b/op-mode-definitions/lldp.xml
index 105bfe237..297ccf1f4 100644
--- a/op-mode-definitions/lldp.xml
+++ b/op-mode-definitions/lldp.xml
@@ -17,7 +17,7 @@
<properties>
<help>Show LLDP neighbor details</help>
</properties>
- <command>/usr/sbin/lldpctl -f plain</command>
+ <command>${vyos_op_scripts_dir}/lldp_op.py --detail</command>
</node>
<tagNode name="interface">
<properties>
@@ -26,7 +26,7 @@
<script>${vyos_completion_dir}/list_interfaces.py</script>
</completionHelp>
</properties>
- <command>${vyos_op_scripts_dir}/lldp_op.py --interface $4</command>
+ <command>${vyos_op_scripts_dir}/lldp_op.py --interface $5</command>
</tagNode>
</children>
</node>
diff --git a/op-mode-definitions/bandwidth-test.xml b/op-mode-definitions/monitor-bandwidth-test.xml
index d1e459b17..d1e459b17 100644
--- a/op-mode-definitions/bandwidth-test.xml
+++ b/op-mode-definitions/monitor-bandwidth-test.xml
diff --git a/op-mode-definitions/bandwidth-monitor.xml b/op-mode-definitions/monitor-bandwidth.xml
index 9af0a9e70..9af0a9e70 100644
--- a/op-mode-definitions/bandwidth-monitor.xml
+++ b/op-mode-definitions/monitor-bandwidth.xml
diff --git a/op-mode-definitions/monitor-log.xml b/op-mode-definitions/monitor-log.xml
new file mode 100644
index 000000000..99efe5306
--- /dev/null
+++ b/op-mode-definitions/monitor-log.xml
@@ -0,0 +1,13 @@
+<?xml version="1.0"?>
+<interfaceDefinition>
+ <node name="monitor">
+ <children>
+ <node name="log">
+ <properties>
+ <help>Monitor last lines of messages file</help>
+ </properties>
+ <command>tail --follow=name /var/log/messages</command>
+ </node>
+ </children>
+ </node>
+</interfaceDefinition>
diff --git a/op-mode-definitions/monitor-ndp.xml b/op-mode-definitions/monitor-ndp.xml
index e25eccf3a..1ac6ce39b 100644
--- a/op-mode-definitions/monitor-ndp.xml
+++ b/op-mode-definitions/monitor-ndp.xml
@@ -4,7 +4,7 @@
<children>
<node name="ndp">
<properties>
- <help>Monitors the NDP information received by the router through the device</help>
+ <help>Monitor the NDP information received by the router through the device</help>
</properties>
<command>sudo ndptool monitor</command>
<children>
@@ -20,7 +20,7 @@
<tagNode name="type">
<command>sudo ndptool monitor --ifname=$4 --msg-type=$6</command>
<properties>
- <help>Monitor ndp protocol on specified interface</help>
+ <help>Monitor specific types of NDP protocols</help>
<completionHelp>
<list>rs ra ns na</list>
</completionHelp>
@@ -31,7 +31,7 @@
<tagNode name="type">
<command>sudo ndptool monitor --msg-type=$4</command>
<properties>
- <help>Monitor ndp protocol on specified interface</help>
+ <help>Monitor specific types of NDP protocols</help>
<completionHelp>
<list>rs ra ns na</list>
</completionHelp>
diff --git a/op-mode-definitions/ping.xml b/op-mode-definitions/ping.xml
new file mode 100644
index 000000000..4c25a59ab
--- /dev/null
+++ b/op-mode-definitions/ping.xml
@@ -0,0 +1,23 @@
+<?xml version="1.0"?>
+<interfaceDefinition>
+ <tagNode name="ping">
+ <properties>
+ <help>Send Internet Control Message Protocol (ICMP) echo request</help>
+ <completionHelp>
+ <list>&lt;hostname&gt; &lt;x.x.x.x&gt; &lt;h:h:h:h:h:h:h:h&gt;</list>
+ </completionHelp>
+ </properties>
+ <command>${vyos_op_scripts_dir}/ping.py ${@:2}</command>
+ <children>
+ <leafNode name="node.tag">
+ <properties>
+ <help>Ping options</help>
+ <completionHelp>
+ <script>${vyos_op_scripts_dir}/ping.py --get-options "${COMP_WORDS[@]}"</script>
+ </completionHelp>
+ </properties>
+ <command>${vyos_op_scripts_dir}/ping.py ${@:2}</command>
+ </leafNode>
+ </children>
+ </tagNode>
+</interfaceDefinition>
diff --git a/op-mode-definitions/show-console-server.xml b/op-mode-definitions/show-console-server.xml
index e47b6cfaa..77a7f3376 100644
--- a/op-mode-definitions/show-console-server.xml
+++ b/op-mode-definitions/show-console-server.xml
@@ -1,18 +1,5 @@
<?xml version="1.0"?>
<interfaceDefinition>
- <node name="connect">
- <children>
- <tagNode name="console">
- <properties>
- <help>Connect to device attached to serial console server</help>
- <completionHelp>
- <path>service console-server device</path>
- </completionHelp>
- </properties>
- <command>/usr/bin/console "$3"</command>
- </tagNode>
- </children>
- </node>
<node name="show">
<children>
<node name="log">
diff --git a/op-mode-definitions/show-hardware.xml b/op-mode-definitions/show-hardware.xml
index a49036397..c3ff3a60f 100644
--- a/op-mode-definitions/show-hardware.xml
+++ b/op-mode-definitions/show-hardware.xml
@@ -71,14 +71,20 @@
<properties>
<help>Show peripherals connected to the USB bus</help>
</properties>
- <command>lsusb</command>
+ <command>/usr/bin/lsusb -t</command>
<children>
<node name="detail">
<properties>
<help>Show detailed USB bus information</help>
</properties>
- <command>lsusb -v</command>
+ <command>/usr/bin/lsusb -v</command>
</node>
+ <leafNode name="serial">
+ <properties>
+ <help>Show information about connected USB serial ports</help>
+ </properties>
+ <command>${vyos_op_scripts_dir}/show_usb_serial.py</command>
+ </leafNode>
</children>
</node>
</children>
diff --git a/op-mode-definitions/show-interfaces-pppoe.xml b/op-mode-definitions/show-interfaces-pppoe.xml
index 4263a2f0a..393ca912f 100644
--- a/op-mode-definitions/show-interfaces-pppoe.xml
+++ b/op-mode-definitions/show-interfaces-pppoe.xml
@@ -26,7 +26,7 @@
<path>interfaces pppoe</path>
</completionHelp>
</properties>
- <command>/usr/sbin/pppstats $4</command>
+ <command>if [ -d "/sys/class/net/$4" ]; then /usr/sbin/pppstats "$4"; fi</command>
</leafNode>
</children>
</tagNode>
diff --git a/op-mode-definitions/show-interfaces-wirelessmodem.xml b/op-mode-definitions/show-interfaces-wirelessmodem.xml
index 46f872c85..c0ab9c66f 100644
--- a/op-mode-definitions/show-interfaces-wirelessmodem.xml
+++ b/op-mode-definitions/show-interfaces-wirelessmodem.xml
@@ -26,7 +26,7 @@
<path>interfaces wirelessmodem</path>
</completionHelp>
</properties>
- <command>/usr/sbin/pppstats $4</command>
+ <command>if [ -d "/sys/class/net/$4" ]; then /usr/sbin/pppstats "$4"; fi</command>
</leafNode>
</children>
</tagNode>
diff --git a/op-mode-definitions/show-ipv6-bgp.xml b/op-mode-definitions/show-ipv6-bgp.xml
new file mode 100644
index 000000000..67a8c8658
--- /dev/null
+++ b/op-mode-definitions/show-ipv6-bgp.xml
@@ -0,0 +1,24 @@
+<?xml version="1.0"?>
+<interfaceDefinition>
+ <node name="show">
+ <children>
+ <node name="ipv6">
+ <children>
+ <node name="bgp">
+ <children>
+ <tagNode name="route-map">
+ <properties>
+ <help>Show BGP routes matching the specified route map</help>
+ <completionHelp>
+ <path>policy route-map</path>
+ </completionHelp>
+ </properties>
+ <command>/usr/bin/vtysh -c "show bgp ipv6 route-map $5"</command>
+ </tagNode>
+ </children>
+ </node>
+ </children>
+ </node>
+ </children>
+ </node>
+</interfaceDefinition>
diff --git a/op-mode-definitions/show-system.xml b/op-mode-definitions/show-system.xml
index 74b34ae92..1b98b559b 100644
--- a/op-mode-definitions/show-system.xml
+++ b/op-mode-definitions/show-system.xml
@@ -176,20 +176,6 @@
</properties>
<command>uptime</command>
</leafNode>
- <node name="usb">
- <properties>
- <help>Show information about Universal Serial Bus (USB)</help>
- </properties>
- <command>/usr/bin/lsusb -t</command>
- <children>
- <leafNode name="serial">
- <properties>
- <help>Show information about connected USB serial ports</help>
- </properties>
- <command>${vyos_op_scripts_dir}/show_usb_serial.py</command>
- </leafNode>
- </children>
- </node>
</children>
</node>
</children>
diff --git a/op-mode-definitions/show-vrf.xml b/op-mode-definitions/show-vrf.xml
index 1c806908b..438e7c334 100644
--- a/op-mode-definitions/show-vrf.xml
+++ b/op-mode-definitions/show-vrf.xml
@@ -11,9 +11,9 @@
<tagNode name="vrf">
<properties>
<help>Show information on specific VRF instance</help>
- <completionHelp>
- <path>vrf name</path>
- </completionHelp>
+ <completionHelp>
+ <path>vrf name</path>
+ </completionHelp>
</properties>
<command>${vyos_op_scripts_dir}/show_vrf.py -e "$3"</command>
<children>
diff --git a/op-mode-definitions/traceroute.xml b/op-mode-definitions/traceroute.xml
index 340d28280..efbaaeb2f 100644
--- a/op-mode-definitions/traceroute.xml
+++ b/op-mode-definitions/traceroute.xml
@@ -25,6 +25,24 @@
</completionHelp>
</properties>
<command>/usr/bin/traceroute -4 "$3"</command>
+ <children>
+ <tagNode name="tcp">
+ <properties>
+ <help>Route tracing and port detection using TCP</help>
+ </properties>
+ <children>
+ <tagNode name="port">
+ <properties>
+ <help>Perform operations on TCP ports</help>
+ <completionHelp>
+ <list>0-65535</list>
+ </completionHelp>
+ </properties>
+ <command>sudo /usr/sbin/tcptraceroute "$3" $6</command>
+ </tagNode>
+ </children>
+ </tagNode>
+ </children>
</tagNode>
<tagNode name="ipv6">
<properties>
@@ -34,6 +52,24 @@
</completionHelp>
</properties>
<command>/usr/bin/traceroute -6 "$3"</command>
+ <children>
+ <tagNode name="tcp">
+ <properties>
+ <help>Use TCP/IPv6 packets to perform a traceroute</help>
+ </properties>
+ <children>
+ <tagNode name="port">
+ <properties>
+ <help>Perform operations on TCP ports</help>
+ <completionHelp>
+ <list>0-65535</list>
+ </completionHelp>
+ </properties>
+ <command>sudo /usr/sbin/tcptraceroute6 "$3" $6</command>
+ </tagNode>
+ </children>
+ </tagNode>
+ </children>
</tagNode>
<tagNode name="vrf">
<properties>
diff --git a/python/vyos/config.py b/python/vyos/config.py
index 5d58316e7..884d6d947 100644
--- a/python/vyos/config.py
+++ b/python/vyos/config.py
@@ -63,23 +63,13 @@ In operational mode, all functions return values from the running config.
"""
-import os
import re
import json
-import subprocess
from copy import deepcopy
import vyos.util
import vyos.configtree
-
-class VyOSError(Exception):
- """
- Raised on config access errors, most commonly if the type of a config tree node
- in the system does not match the type of operation.
-
- """
- pass
-
+from vyos.configsource import ConfigSource, ConfigSourceSession
class Config(object):
"""
@@ -89,51 +79,18 @@ class Config(object):
the only state it keeps is relative *config path* for convenient access to config
subtrees.
"""
- def __init__(self, session_env=None):
- self._cli_shell_api = "/bin/cli-shell-api"
- self._level = []
- self._dict_cache = {}
-
- if session_env:
- self.__session_env = session_env
- else:
- self.__session_env = None
-
- # Running config can be obtained either from op or conf mode, it always succeeds
- # once the config system is initialized during boot;
- # before initialization, set to empty string
- if os.path.isfile('/tmp/vyos-config-status'):
- try:
- running_config_text = self._run([self._cli_shell_api, '--show-active-only', '--show-show-defaults', '--show-ignore-edit', 'showConfig'])
- except VyOSError:
- running_config_text = ''
- else:
- running_config_text = ''
-
- # Session config ("active") only exists in conf mode.
- # In op mode, we'll just use the same running config for both active and session configs.
- if self.in_session():
- try:
- session_config_text = self._run([self._cli_shell_api, '--show-working-only', '--show-show-defaults', '--show-ignore-edit', 'showConfig'])
- except VyOSError:
- session_config_text = ''
- else:
- session_config_text = running_config_text
-
- if running_config_text:
- self._running_config = vyos.configtree.ConfigTree(running_config_text)
- else:
- self._running_config = None
-
- if session_config_text:
- self._session_config = vyos.configtree.ConfigTree(session_config_text)
+ def __init__(self, session_env=None, config_source=None):
+ if config_source is None:
+ self._config_source = ConfigSourceSession(session_env)
else:
- self._session_config = None
+ if not isinstance(config_source, ConfigSource):
+ raise TypeError("config_source not of type ConfigSource")
+ self._config_source = config_source
- def _make_command(self, op, path):
- args = path.split()
- cmd = [self._cli_shell_api, op] + args
- return cmd
+ self._level = []
+ self._dict_cache = {}
+ (self._running_config,
+ self._session_config) = self._config_source.get_configtree_tuple()
def _make_path(self, path):
# Backwards-compatibility stuff: original implementation used string paths
@@ -149,19 +106,6 @@ class Config(object):
raise TypeError("Path must be a whitespace-separated string or a list")
return (self._level + path)
- def _run(self, cmd):
- if self.__session_env:
- p = subprocess.Popen(cmd, stdout=subprocess.PIPE, env=self.__session_env)
- else:
- p = subprocess.Popen(cmd, stdout=subprocess.PIPE)
- out = p.stdout.read()
- p.wait()
- p.communicate()
- if p.returncode != 0:
- raise VyOSError()
- else:
- return out.decode('ascii')
-
def set_level(self, path):
"""
Set the *edit level*, that is, a relative config tree path.
@@ -229,22 +173,14 @@ class Config(object):
Returns:
True if the config session has uncommited changes, False otherwise.
"""
- try:
- self._run(self._make_command('sessionChanged', ''))
- return True
- except VyOSError:
- return False
+ return self._config_source.session_changed()
def in_session(self):
"""
Returns:
True if called from a configuration session, False otherwise.
"""
- try:
- self._run(self._make_command('inSession', ''))
- return True
- except VyOSError:
- return False
+ return self._config_source.in_session()
def show_config(self, path=[], default=None, effective=False):
"""
@@ -255,40 +191,7 @@ class Config(object):
Returns:
str: working configuration
"""
-
- # show_config should be independent of CLI edit level.
- # Set the CLI edit environment to the top level, and
- # restore original on exit.
- save_env = self.__session_env
-
- env_str = self._run(self._make_command('getEditResetEnv', ''))
- env_list = re.findall(r'([A-Z_]+)=\'([^;\s]+)\'', env_str)
- root_env = os.environ
- for k, v in env_list:
- root_env[k] = v
-
- self.__session_env = root_env
-
- # FIXUP: by default, showConfig will give you a diff
- # if there are uncommitted changes.
- # The config parser obviously cannot work with diffs,
- # so we need to supress diff production using appropriate
- # options for getting either running (active)
- # or proposed (working) config.
- if effective:
- path = ['--show-active-only'] + path
- else:
- path = ['--show-working-only'] + path
-
- if isinstance(path, list):
- path = " ".join(path)
- try:
- out = self._run(self._make_command('showConfig', path))
- self.__session_env = save_env
- return out
- except VyOSError:
- self.__session_env = save_env
- return(default)
+ return self._config_source.show_config(path, default, effective)
def get_cached_dict(self, effective=False):
cached = self._dict_cache.get(effective, {})
@@ -346,12 +249,8 @@ class Config(object):
Note:
It also returns False if node doesn't exist.
"""
- try:
- path = " ".join(self._level) + " " + path
- self._run(self._make_command('isMulti', path))
- return True
- except VyOSError:
- return False
+ self._config_source.set_level(self.get_level)
+ return self._config_source.is_multi(path)
def is_tag(self, path):
"""
@@ -364,12 +263,8 @@ class Config(object):
Note:
It also returns False if node doesn't exist.
"""
- try:
- path = " ".join(self._level) + " " + path
- self._run(self._make_command('isTag', path))
- return True
- except VyOSError:
- return False
+ self._config_source.set_level(self.get_level)
+ return self._config_source.is_tag(path)
def is_leaf(self, path):
"""
@@ -382,12 +277,8 @@ class Config(object):
Note:
It also returns False if node doesn't exist.
"""
- try:
- path = " ".join(self._level) + " " + path
- self._run(self._make_command('isLeaf', path))
- return True
- except VyOSError:
- return False
+ self._config_source.set_level(self.get_level)
+ return self._config_source.is_leaf(path)
def return_value(self, path, default=None):
"""
@@ -548,9 +439,6 @@ class Config(object):
Returns:
str list: child node names
-
- Raises:
- VyOSError: if the node is not a tag node
"""
if self._running_config:
try:
diff --git a/python/vyos/configdict.py b/python/vyos/configdict.py
index 0dc7578d8..010eda45c 100644
--- a/python/vyos/configdict.py
+++ b/python/vyos/configdict.py
@@ -15,15 +15,14 @@
"""
A library for retrieving value dicts from VyOS configs in a declarative fashion.
-
"""
+import os
+import jmespath
from enum import Enum
from copy import deepcopy
from vyos import ConfigError
-from vyos.validate import is_member
-from vyos.util import ifname_from_config
def retrieve_config(path_hash, base_path, config):
"""
@@ -102,397 +101,174 @@ def dict_merge(source, destination):
return tmp
def list_diff(first, second):
- """
- Diff two dictionaries and return only unique items
- """
+ """ Diff two dictionaries and return only unique items """
second = set(second)
return [item for item in first if item not in second]
-
-def get_ethertype(ethertype_val):
- if ethertype_val == '0x88A8':
- return '802.1ad'
- elif ethertype_val == '0x8100':
- return '802.1q'
- else:
- raise ConfigError('invalid ethertype "{}"'.format(ethertype_val))
-
-dhcpv6_pd_default_data = {
- 'dhcpv6_prm_only': False,
- 'dhcpv6_temporary': False,
- 'dhcpv6_pd_length': '',
- 'dhcpv6_pd_interfaces': []
-}
-
-interface_default_data = {
- **dhcpv6_pd_default_data,
- 'address': [],
- 'address_remove': [],
- 'description': '',
- 'dhcp_client_id': '',
- 'dhcp_hostname': '',
- 'dhcp_vendor_class_id': '',
- 'disable': False,
- 'disable_link_detect': 1,
- 'ip_disable_arp_filter': 1,
- 'ip_enable_arp_accept': 0,
- 'ip_enable_arp_announce': 0,
- 'ip_enable_arp_ignore': 0,
- 'ip_proxy_arp': 0,
- 'ipv6_accept_ra': 1,
- 'ipv6_autoconf': 0,
- 'ipv6_eui64_prefix': [],
- 'ipv6_eui64_prefix_remove': [],
- 'ipv6_forwarding': 1,
- 'ipv6_dup_addr_detect': 1,
- 'is_bridge_member': False,
- 'mac': '',
- 'mtu': 1500,
- 'vrf': ''
-}
-
-vlan_default = {
- **interface_default_data,
- 'egress_qos': '',
- 'egress_qos_changed': False,
- 'ingress_qos': '',
- 'ingress_qos_changed': False,
- 'vif_c': {},
- 'vif_c_remove': []
-}
-
-# see: https://docs.python.org/3/library/enum.html#functional-api
-disable = Enum('disable','none was now both')
-
-def disable_state(conf, check=[3,5,7]):
+def T2665_default_dict_cleanup(dict):
+ """ Cleanup default keys for tag nodes https://phabricator.vyos.net/T2665. """
+ # Cleanup
+ for vif in ['vif', 'vif_s']:
+ if vif in dict.keys():
+ for key in ['ip', 'mtu']:
+ if key in dict[vif].keys():
+ del dict[vif][key]
+
+ # cleanup VIF-S defaults
+ if 'vif_c' in dict[vif].keys():
+ for key in ['ip', 'mtu']:
+ if key in dict[vif]['vif_c'].keys():
+ del dict[vif]['vif_c'][key]
+ # If there is no vif-c defined and we just cleaned the default
+ # keys - we can clean the entire vif-c dict as it's useless
+ if not dict[vif]['vif_c']:
+ del dict[vif]['vif_c']
+
+ # If there is no real vif/vif-s defined and we just cleaned the default
+ # keys - we can clean the entire vif dict as it's useless
+ if not dict[vif]:
+ del dict[vif]
+
+ return dict
+
+def leaf_node_changed(conf, path):
"""
- return if and how a particual section of the configuration is has disable'd
- using "disable" including if it was disabled by one of its parent.
-
- check: a list of the level we should check, here 7,5 and 3
- interfaces ethernet eth1 vif-s 1 vif-c 2 disable
- interfaces ethernet eth1 vif 1 disable
- interfaces ethernet eth1 disable
-
- it returns an enum (none, was, now, both)
+ Check if a leaf node was altered. If it has been altered - values has been
+ changed, or it was added/removed, we will return the old value. If nothing
+ has been changed, None is returned
"""
-
- # save where we are in the config
- current_level = conf.get_level()
-
- # logic to figure out if the interface (or one of it parent is disabled)
- eff_disable = False
- act_disable = False
-
- levels = check[:]
- working_level = current_level[:]
-
- while levels:
- position = len(working_level)
- if not position:
- break
- if position not in levels:
- working_level = working_level[:-1]
- continue
-
- levels.remove(position)
- conf.set_level(working_level)
- working_level = working_level[:-1]
-
- eff_disable = eff_disable or conf.exists_effective('disable')
- act_disable = act_disable or conf.exists('disable')
-
- conf.set_level(current_level)
-
- # how the disabling changed
- if eff_disable and act_disable:
- return disable.both
- if eff_disable and not eff_disable:
- return disable.was
- if not eff_disable and act_disable:
- return disable.now
- return disable.none
-
-
-def intf_to_dict(conf, default):
- from vyos.ifconfig import Interface
-
+ from vyos.configdiff import get_config_diff
+ D = get_config_diff(conf, key_mangling=('-', '_'))
+ D.set_level(conf.get_level())
+ (new, old) = D.get_value_diff(path)
+ if new != old:
+ if isinstance(old, str):
+ return old
+ elif isinstance(old, list):
+ if isinstance(new, str):
+ new = [new]
+ elif isinstance(new, type(None)):
+ new = []
+ return list_diff(old, new)
+
+ return None
+
+def node_changed(conf, path):
"""
- Common used function which will extract VLAN related information from config
- and represent the result as Python dictionary.
-
- Function call's itself recursively if a vif-s/vif-c pair is detected.
+ Check if a leaf node was altered. If it has been altered - values has been
+ changed, or it was added/removed, we will return the old value. If nothing
+ has been changed, None is returned
"""
+ from vyos.configdiff import get_config_diff, Diff
+ D = get_config_diff(conf, key_mangling=('-', '_'))
+ D.set_level(conf.get_level())
+ # get_child_nodes() will return dict_keys(), mangle this into a list with PEP448
+ keys = D.get_child_nodes_diff(path, expand_nodes=Diff.DELETE)['delete'].keys()
+ return list(keys)
+
+def get_removed_vlans(conf, dict):
+ """
+ Common function to parse a dictionary retrieved via get_config_dict() and
+ determine any added/removed VLAN interfaces - be it 802.1q or Q-in-Q.
+ """
+ from vyos.configdiff import get_config_diff, Diff
- intf = deepcopy(default)
- intf['intf'] = ifname_from_config(conf)
-
- current_vif_list = conf.list_nodes(['vif'])
- previous_vif_list = conf.list_effective_nodes(['vif'])
-
- # set the vif to be deleted
- for vif in previous_vif_list:
- if vif not in current_vif_list:
- intf['vif_remove'].append(vif)
-
- # retrieve interface description
- if conf.exists(['description']):
- intf['description'] = conf.return_value(['description'])
-
- # get DHCP client identifier
- if conf.exists(['dhcp-options', 'client-id']):
- intf['dhcp_client_id'] = conf.return_value(['dhcp-options', 'client-id'])
-
- # DHCP client host name (overrides the system host name)
- if conf.exists(['dhcp-options', 'host-name']):
- intf['dhcp_hostname'] = conf.return_value(['dhcp-options', 'host-name'])
-
- # DHCP client vendor identifier
- if conf.exists(['dhcp-options', 'vendor-class-id']):
- intf['dhcp_vendor_class_id'] = conf.return_value(
- ['dhcp-options', 'vendor-class-id'])
-
- # DHCPv6 only acquire config parameters, no address
- if conf.exists(['dhcpv6-options', 'parameters-only']):
- intf['dhcpv6_prm_only'] = True
-
- # DHCPv6 prefix delegation (RFC3633)
- current_level = conf.get_level()
- if conf.exists(['dhcpv6-options', 'prefix-delegation']):
- dhcpv6_pd_path = current_level + ['dhcpv6-options', 'prefix-delegation']
- conf.set_level(dhcpv6_pd_path)
-
- # retriebe DHCPv6-PD prefix helper length as some ISPs only hand out a
- # /64 by default (https://phabricator.vyos.net/T2506)
- if conf.exists(['length']):
- intf['dhcpv6_pd_length'] = conf.return_value(['length'])
+ # Check vif, vif-s/vif-c VLAN interfaces for removal
+ D = get_config_diff(conf, key_mangling=('-', '_'))
+ D.set_level(conf.get_level())
+ # get_child_nodes() will return dict_keys(), mangle this into a list with PEP448
+ keys = D.get_child_nodes_diff(['vif'], expand_nodes=Diff.DELETE)['delete'].keys()
+ if keys:
+ dict.update({'vif_remove': [*keys]})
- for interface in conf.list_nodes(['interface']):
- conf.set_level(dhcpv6_pd_path + ['interface', interface])
- pd = {
- 'ifname': interface,
- 'sla_id': '',
- 'sla_len': '',
- 'if_id': ''
- }
+ # get_child_nodes() will return dict_keys(), mangle this into a list with PEP448
+ keys = D.get_child_nodes_diff(['vif-s'], expand_nodes=Diff.DELETE)['delete'].keys()
+ if keys:
+ dict.update({'vif_s_remove': [*keys]})
- if conf.exists(['sla-id']):
- pd['sla_id'] = conf.return_value(['sla-id'])
+ for vif in dict.get('vif_s', {}).keys():
+ keys = D.get_child_nodes_diff(['vif-s', vif, 'vif-c'], expand_nodes=Diff.DELETE)['delete'].keys()
+ if keys:
+ dict.update({'vif_s': { vif : {'vif_c_remove': [*keys]}}})
- if conf.exists(['sla-len']):
- pd['sla_len'] = conf.return_value(['sla-len'])
+ return dict
- if conf.exists(['address']):
- pd['if_id'] = conf.return_value(['address'])
-
- intf['dhcpv6_pd_interfaces'].append(pd)
-
- # re-set config level
- conf.set_level(current_level)
-
- # DHCPv6 temporary IPv6 address
- if conf.exists(['dhcpv6-options', 'temporary']):
- intf['dhcpv6_temporary'] = True
-
- # ignore link state changes
- if conf.exists(['disable-link-detect']):
- intf['disable_link_detect'] = 2
-
- # ARP filter configuration
- if conf.exists(['ip', 'disable-arp-filter']):
- intf['ip_disable_arp_filter'] = 0
-
- # ARP enable accept
- if conf.exists(['ip', 'enable-arp-accept']):
- intf['ip_enable_arp_accept'] = 1
-
- # ARP enable announce
- if conf.exists(['ip', 'enable-arp-announce']):
- intf['ip_enable_arp_announce'] = 1
-
- # ARP enable ignore
- if conf.exists(['ip', 'enable-arp-ignore']):
- intf['ip_enable_arp_ignore'] = 1
-
- # Enable Proxy ARP
- if conf.exists(['ip', 'enable-proxy-arp']):
- intf['ip_proxy_arp'] = 1
-
- # Enable acquisition of IPv6 address using stateless autoconfig (SLAAC)
- if conf.exists(['ipv6', 'address', 'autoconf']):
- intf['ipv6_autoconf'] = 1
-
- # Disable IPv6 forwarding on this interface
- if conf.exists(['ipv6', 'disable-forwarding']):
- intf['ipv6_forwarding'] = 0
-
- # check if interface is member of a bridge
- intf['is_bridge_member'] = is_member(conf, intf['intf'], 'bridge')
-
- # IPv6 Duplicate Address Detection (DAD) tries
- if conf.exists(['ipv6', 'dup-addr-detect-transmits']):
- intf['ipv6_dup_addr_detect'] = int(
- conf.return_value(['ipv6', 'dup-addr-detect-transmits']))
-
- # Media Access Control (MAC) address
- if conf.exists(['mac']):
- intf['mac'] = conf.return_value(['mac'])
-
- # Maximum Transmission Unit (MTU)
- if conf.exists(['mtu']):
- intf['mtu'] = int(conf.return_value(['mtu']))
-
- # retrieve VRF instance
- if conf.exists(['vrf']):
- intf['vrf'] = conf.return_value(['vrf'])
-
- # egress QoS
- if conf.exists(['egress-qos']):
- intf['egress_qos'] = conf.return_value(['egress-qos'])
-
- # egress changes QoS require VLAN interface recreation
- if conf.return_effective_value(['egress-qos']):
- if intf['egress_qos'] != conf.return_effective_value(['egress-qos']):
- intf['egress_qos_changed'] = True
-
- # ingress QoS
- if conf.exists(['ingress-qos']):
- intf['ingress_qos'] = conf.return_value(['ingress-qos'])
-
- # ingress changes QoS require VLAN interface recreation
- if conf.return_effective_value(['ingress-qos']):
- if intf['ingress_qos'] != conf.return_effective_value(['ingress-qos']):
- intf['ingress_qos_changed'] = True
-
- # Get the interface addresses
- intf['address'] = conf.return_values(['address'])
-
- # addresses to remove - difference between effective and working config
- intf['address_remove'] = list_diff(
- conf.return_effective_values(['address']), intf['address'])
-
- # Get prefixes for IPv6 addressing based on MAC address (EUI-64)
- intf['ipv6_eui64_prefix'] = conf.return_values(['ipv6', 'address', 'eui64'])
-
- # EUI64 to remove - difference between effective and working config
- intf['ipv6_eui64_prefix_remove'] = list_diff(
- conf.return_effective_values(['ipv6', 'address', 'eui64']),
- intf['ipv6_eui64_prefix'])
-
- # Determine if the interface should be disabled
- disabled = disable_state(conf)
- if disabled == disable.both:
- # was and is still disabled
- intf['disable'] = True
- elif disabled == disable.now:
- # it is now disable but was not before
- intf['disable'] = True
- elif disabled == disable.was:
- # it was disable but not anymore
- intf['disable'] = False
- else:
- # normal change
- intf['disable'] = False
-
- # Remove the default link-local address if no-default-link-local is set,
- # if member of a bridge or if disabled (it may not have a MAC if it's down)
- if ( conf.exists(['ipv6', 'address', 'no-default-link-local'])
- or intf.get('is_bridge_member') or intf['disable'] ):
- intf['ipv6_eui64_prefix_remove'].append('fe80::/64')
- else:
- # add the link-local by default to make IPv6 work
- intf['ipv6_eui64_prefix'].append('fe80::/64')
-
- # If MAC has changed, remove and re-add all IPv6 EUI64 addresses
- try:
- interface = Interface(intf['intf'], create=False)
- if intf['mac'] and intf['mac'] != interface.get_mac():
- intf['ipv6_eui64_prefix_remove'] += intf['ipv6_eui64_prefix']
- except Exception:
- # If the interface does not exist, it could not have changed
- pass
-
- # to make IPv6 SLAAC and DHCPv6 work with forwarding=1,
- # accept_ra must be 2
- if intf['ipv6_autoconf'] or 'dhcpv6' in intf['address']:
- intf['ipv6_accept_ra'] = 2
-
- return intf, disable
-
-
-
-def add_to_dict(conf, disabled, ifdict, section, key):
+def get_interface_dict(config, base, ifname=''):
"""
- parse a section of vif/vif-s/vif-c and add them to the dict
- follow the convention to:
- * use the "key" for what to add
- * use the "key" what what to remove
-
- conf: is the Config() already at the level we need to parse
- disabled: is a disable enum so we know how to handle to data
- intf: if the interface dictionary
- section: is the section name to parse (vif/vif-s/vif-c)
- key: is the dict key to use (vif/vifs/vifc)
+ Common utility function to retrieve and mandgle the interfaces available
+ in CLI configuration. All interfaces have a common base ground where the
+ value retrival is identical - so it can and should be reused
+
+ Will return a dictionary with the necessary interface configuration
"""
+ from vyos.xml import defaults
+ from vyos.validate import is_member
+
+ if not ifname:
+ # determine tagNode instance
+ if 'VYOS_TAGNODE_VALUE' not in os.environ:
+ raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified')
+ ifname = os.environ['VYOS_TAGNODE_VALUE']
+
+ # retrieve interface default values
+ default_values = defaults(base)
+
+ # setup config level which is extracted in get_removed_vlans()
+ config.set_level(base + [ifname])
+ dict = config.get_config_dict([], key_mangling=('-', '_'), get_first_key=True)
+
+ # Check if interface has been removed
+ if dict == {}:
+ dict.update({'deleted' : ''})
+
+ # Add interface instance name into dictionary
+ dict.update({'ifname': ifname})
+
+ # We have gathered the dict representation of the CLI, but there are
+ # default options which we need to update into the dictionary
+ # retrived.
+ dict = dict_merge(default_values, dict)
+
+ # Check if we are a member of a bridge device
+ bridge = is_member(config, ifname, 'bridge')
+ if bridge:
+ dict.update({'is_bridge_member' : bridge})
+
+ # Check if we are a member of a bond device
+ bond = is_member(config, ifname, 'bonding')
+ if bond:
+ dict.update({'is_bond_member' : bond})
+
+ mac = leaf_node_changed(config, ['mac'])
+ if mac:
+ dict.update({'mac_old' : mac})
+
+ eui64 = leaf_node_changed(config, ['ipv6', 'address', 'eui64'])
+ if eui64:
+ # XXX: T2636 workaround: convert string to a list with one element
+ if isinstance(eui64, str):
+ eui64 = [eui64]
+ tmp = jmespath.search('ipv6.address', dict)
+ if not tmp:
+ dict.update({'ipv6': {'address': {'eui64_old': eui64}}})
+ else:
+ dict['ipv6']['address'].update({'eui64_old': eui64})
+
+ # remove wrongly inserted values
+ dict = T2665_default_dict_cleanup(dict)
+
+ # The values are identical for vif, vif-s and vif-c as the all include the same
+ # XML definitions which hold the defaults
+ default_vif_values = defaults(base + ['vif'])
+ for vif, vif_config in dict.get('vif', {}).items():
+ vif_config = dict_merge(default_vif_values, vif_config)
+ for vif_s, vif_s_config in dict.get('vif_s', {}).items():
+ vif_s_config = dict_merge(default_vif_values, vif_s_config)
+ for vif_c, vif_c_config in vif_s_config.get('vif_c', {}).items():
+ vif_c_config = dict_merge(default_vif_values, vif_c_config)
+
+ # Check vif, vif-s/vif-c VLAN interfaces for removal
+ dict = get_removed_vlans(config, dict)
+
+ return dict
- if not conf.exists(section):
- return ifdict
-
- effect = conf.list_effective_nodes(section)
- active = conf.list_nodes(section)
-
- # the section to parse for vlan
- sections = []
-
- # determine which interfaces to add or remove based on disable state
- if disabled == disable.both:
- # was and is still disabled
- ifdict[f'{key}_remove'] = []
- elif disabled == disable.now:
- # it is now disable but was not before
- ifdict[f'{key}_remove'] = effect
- elif disabled == disable.was:
- # it was disable but not anymore
- ifdict[f'{key}_remove'] = []
- sections = active
- else:
- # normal change
- # get interfaces (currently effective) - to determine which
- # interface is no longer present and needs to be removed
- ifdict[f'{key}_remove'] = list_diff(effect, active)
- sections = active
-
- current_level = conf.get_level()
-
- # add each section, the key must already exists
- for s in sections:
- # set config level to vif interface
- conf.set_level(current_level + [section, s])
- # add the vlan config as a key (vlan id) - value (config) pair
- ifdict[key][s] = vlan_to_dict(conf)
-
- # re-set configuration level to leave things as found
- conf.set_level(current_level)
-
- return ifdict
-
-
-def vlan_to_dict(conf, default=vlan_default):
- vlan, disabled = intf_to_dict(conf, default)
-
- # if this is a not within vif-s node, we are done
- if conf.get_level()[-2] != 'vif-s':
- return vlan
-
- # ethertype is mandatory on vif-s nodes and only exists here!
- # ethertype uses a default of 0x88A8
- tmp = '0x88A8'
- if conf.exists('ethertype'):
- tmp = conf.return_value('ethertype')
- vlan['ethertype'] = get_ethertype(tmp)
-
- # check if there is a Q-in-Q vlan customer interface
- # and call this function recursively
- add_to_dict(conf, disable, vlan, 'vif-c', 'vif_c')
-
- return vlan
diff --git a/python/vyos/configsession.py b/python/vyos/configsession.py
index f2524b37e..0994fd974 100644
--- a/python/vyos/configsession.py
+++ b/python/vyos/configsession.py
@@ -26,7 +26,7 @@ DISCARD = '/opt/vyatta/sbin/my_discard'
SHOW_CONFIG = ['/bin/cli-shell-api', 'showConfig']
LOAD_CONFIG = ['/bin/cli-shell-api', 'loadFile']
SAVE_CONFIG = ['/opt/vyatta/sbin/vyatta-save-config.pl']
-INSTALL_IMAGE = ['/opt/vyatta/sbin/install-image']
+INSTALL_IMAGE = ['/opt/vyatta/sbin/install-image', '--url']
REMOVE_IMAGE = ['/opt/vyatta/bin/vyatta-boot-image.pl', '--del']
GENERATE = ['/opt/vyatta/bin/vyatta-op-cmd-wrapper', 'generate']
SHOW = ['/opt/vyatta/bin/vyatta-op-cmd-wrapper', 'show']
diff --git a/python/vyos/configsource.py b/python/vyos/configsource.py
new file mode 100644
index 000000000..50222e385
--- /dev/null
+++ b/python/vyos/configsource.py
@@ -0,0 +1,318 @@
+
+# Copyright 2020 VyOS maintainers and contributors <maintainers@vyos.io>
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with this library. If not, see <http://www.gnu.org/licenses/>.
+
+import os
+import re
+import subprocess
+
+from vyos.configtree import ConfigTree
+
+class VyOSError(Exception):
+ """
+ Raised on config access errors.
+ """
+ pass
+
+class ConfigSourceError(Exception):
+ '''
+ Raised on error in ConfigSource subclass init.
+ '''
+ pass
+
+class ConfigSource:
+ def __init__(self):
+ self._running_config: ConfigTree = None
+ self._session_config: ConfigTree = None
+
+ def get_configtree_tuple(self):
+ return self._running_config, self._session_config
+
+ def session_changed(self):
+ """
+ Returns:
+ True if the config session has uncommited changes, False otherwise.
+ """
+ raise NotImplementedError(f"function not available for {type(self)}")
+
+ def in_session(self):
+ """
+ Returns:
+ True if called from a configuration session, False otherwise.
+ """
+ raise NotImplementedError(f"function not available for {type(self)}")
+
+ def show_config(self, path=[], default=None, effective=False):
+ """
+ Args:
+ path (str|list): Configuration tree path, or empty
+ default (str): Default value to return
+
+ Returns:
+ str: working configuration
+ """
+ raise NotImplementedError(f"function not available for {type(self)}")
+
+ def is_multi(self, path):
+ """
+ Args:
+ path (str): Configuration tree path
+
+ Returns:
+ True if a node can have multiple values, False otherwise.
+
+ Note:
+ It also returns False if node doesn't exist.
+ """
+ raise NotImplementedError(f"function not available for {type(self)}")
+
+ def is_tag(self, path):
+ """
+ Args:
+ path (str): Configuration tree path
+
+ Returns:
+ True if a node is a tag node, False otherwise.
+
+ Note:
+ It also returns False if node doesn't exist.
+ """
+ raise NotImplementedError(f"function not available for {type(self)}")
+
+ def is_leaf(self, path):
+ """
+ Args:
+ path (str): Configuration tree path
+
+ Returns:
+ True if a node is a leaf node, False otherwise.
+
+ Note:
+ It also returns False if node doesn't exist.
+ """
+ raise NotImplementedError(f"function not available for {type(self)}")
+
+class ConfigSourceSession(ConfigSource):
+ def __init__(self, session_env=None):
+ super().__init__()
+ self._cli_shell_api = "/bin/cli-shell-api"
+ self._level = []
+ if session_env:
+ self.__session_env = session_env
+ else:
+ self.__session_env = None
+
+ # Running config can be obtained either from op or conf mode, it always succeeds
+ # once the config system is initialized during boot;
+ # before initialization, set to empty string
+ if os.path.isfile('/tmp/vyos-config-status'):
+ try:
+ running_config_text = self._run([self._cli_shell_api, '--show-active-only', '--show-show-defaults', '--show-ignore-edit', 'showConfig'])
+ except VyOSError:
+ running_config_text = ''
+ else:
+ running_config_text = ''
+
+ # Session config ("active") only exists in conf mode.
+ # In op mode, we'll just use the same running config for both active and session configs.
+ if self.in_session():
+ try:
+ session_config_text = self._run([self._cli_shell_api, '--show-working-only', '--show-show-defaults', '--show-ignore-edit', 'showConfig'])
+ except VyOSError:
+ session_config_text = ''
+ else:
+ session_config_text = running_config_text
+
+ if running_config_text:
+ self._running_config = ConfigTree(running_config_text)
+ else:
+ self._running_config = None
+
+ if session_config_text:
+ self._session_config = ConfigTree(session_config_text)
+ else:
+ self._session_config = None
+
+ def _make_command(self, op, path):
+ args = path.split()
+ cmd = [self._cli_shell_api, op] + args
+ return cmd
+
+ def _run(self, cmd):
+ if self.__session_env:
+ p = subprocess.Popen(cmd, stdout=subprocess.PIPE, env=self.__session_env)
+ else:
+ p = subprocess.Popen(cmd, stdout=subprocess.PIPE)
+ out = p.stdout.read()
+ p.wait()
+ p.communicate()
+ if p.returncode != 0:
+ raise VyOSError()
+ else:
+ return out.decode('ascii')
+
+ def set_level(self, path):
+ """
+ Set the *edit level*, that is, a relative config tree path.
+ Once set, all operations will be relative to this path,
+ for example, after ``set_level("system")``, calling
+ ``exists("name-server")`` is equivalent to calling
+ ``exists("system name-server"`` without ``set_level``.
+
+ Args:
+ path (str|list): relative config path
+ """
+ # Make sure there's always a space between default path (level)
+ # and path supplied as method argument
+ # XXX: for small strings in-place concatenation is not a problem
+ if isinstance(path, str):
+ if path:
+ self._level = re.split(r'\s+', path)
+ else:
+ self._level = []
+ elif isinstance(path, list):
+ self._level = path.copy()
+ else:
+ raise TypeError("Level path must be either a whitespace-separated string or a list")
+
+ def session_changed(self):
+ """
+ Returns:
+ True if the config session has uncommited changes, False otherwise.
+ """
+ try:
+ self._run(self._make_command('sessionChanged', ''))
+ return True
+ except VyOSError:
+ return False
+
+ def in_session(self):
+ """
+ Returns:
+ True if called from a configuration session, False otherwise.
+ """
+ try:
+ self._run(self._make_command('inSession', ''))
+ return True
+ except VyOSError:
+ return False
+
+ def show_config(self, path=[], default=None, effective=False):
+ """
+ Args:
+ path (str|list): Configuration tree path, or empty
+ default (str): Default value to return
+
+ Returns:
+ str: working configuration
+ """
+
+ # show_config should be independent of CLI edit level.
+ # Set the CLI edit environment to the top level, and
+ # restore original on exit.
+ save_env = self.__session_env
+
+ env_str = self._run(self._make_command('getEditResetEnv', ''))
+ env_list = re.findall(r'([A-Z_]+)=\'([^;\s]+)\'', env_str)
+ root_env = os.environ
+ for k, v in env_list:
+ root_env[k] = v
+
+ self.__session_env = root_env
+
+ # FIXUP: by default, showConfig will give you a diff
+ # if there are uncommitted changes.
+ # The config parser obviously cannot work with diffs,
+ # so we need to supress diff production using appropriate
+ # options for getting either running (active)
+ # or proposed (working) config.
+ if effective:
+ path = ['--show-active-only'] + path
+ else:
+ path = ['--show-working-only'] + path
+
+ if isinstance(path, list):
+ path = " ".join(path)
+ try:
+ out = self._run(self._make_command('showConfig', path))
+ self.__session_env = save_env
+ return out
+ except VyOSError:
+ self.__session_env = save_env
+ return(default)
+
+ def is_multi(self, path):
+ """
+ Args:
+ path (str): Configuration tree path
+
+ Returns:
+ True if a node can have multiple values, False otherwise.
+
+ Note:
+ It also returns False if node doesn't exist.
+ """
+ try:
+ path = " ".join(self._level) + " " + path
+ self._run(self._make_command('isMulti', path))
+ return True
+ except VyOSError:
+ return False
+
+ def is_tag(self, path):
+ """
+ Args:
+ path (str): Configuration tree path
+
+ Returns:
+ True if a node is a tag node, False otherwise.
+
+ Note:
+ It also returns False if node doesn't exist.
+ """
+ try:
+ path = " ".join(self._level) + " " + path
+ self._run(self._make_command('isTag', path))
+ return True
+ except VyOSError:
+ return False
+
+ def is_leaf(self, path):
+ """
+ Args:
+ path (str): Configuration tree path
+
+ Returns:
+ True if a node is a leaf node, False otherwise.
+
+ Note:
+ It also returns False if node doesn't exist.
+ """
+ try:
+ path = " ".join(self._level) + " " + path
+ self._run(self._make_command('isLeaf', path))
+ return True
+ except VyOSError:
+ return False
+
+class ConfigSourceString(ConfigSource):
+ def __init__(self, running_config_text=None, session_config_text=None):
+ super().__init__()
+
+ try:
+ self._running_config = ConfigTree(running_config_text) if running_config_text else None
+ self._session_config = ConfigTree(session_config_text) if session_config_text else None
+ except ValueError:
+ raise ConfigSourceError(f"Init error in {type(self)}")
diff --git a/python/vyos/configverify.py b/python/vyos/configverify.py
index 32129a048..d1519b0ac 100644
--- a/python/vyos/configverify.py
+++ b/python/vyos/configverify.py
@@ -29,11 +29,11 @@ def verify_vrf(config):
recurring validation of VRF configuration.
"""
from netifaces import interfaces
- if 'vrf' in config.keys():
+ if 'vrf' in config:
if config['vrf'] not in interfaces():
raise ConfigError('VRF "{vrf}" does not exist'.format(**config))
- if 'is_bridge_member' in config.keys():
+ if 'is_bridge_member' in config:
raise ConfigError(
'Interface "{ifname}" cannot be both a member of VRF "{vrf}" '
'and bridge "{is_bridge_member}"!'.format(**config))
@@ -41,14 +41,14 @@ def verify_vrf(config):
def verify_address(config):
"""
- Common helper function used by interface implementations to
- perform recurring validation of IP address assignmenr
- when interface also is part of a bridge.
+ Common helper function used by interface implementations to perform
+ recurring validation of IP address assignment when interface is part
+ of a bridge or bond.
"""
if {'is_bridge_member', 'address'} <= set(config):
raise ConfigError(
- f'Cannot assign address to interface "{ifname}" as it is a '
- f'member of bridge "{is_bridge_member}"!'.format(**config))
+ 'Cannot assign address to interface "{ifname}" as it is a '
+ 'member of bridge "{is_bridge_member}"!'.format(**config))
def verify_bridge_delete(config):
@@ -57,11 +57,20 @@ def verify_bridge_delete(config):
perform recurring validation of IP address assignmenr
when interface also is part of a bridge.
"""
- if 'is_bridge_member' in config.keys():
+ if 'is_bridge_member' in config:
raise ConfigError(
'Interface "{ifname}" cannot be deleted as it is a '
'member of bridge "{is_bridge_member}"!'.format(**config))
+def verify_interface_exists(config):
+ """
+ Common helper function used by interface implementations to perform
+ recurring validation if an interface actually exists.
+ """
+ from netifaces import interfaces
+ if not config['ifname'] in interfaces():
+ raise ConfigError('Interface "{ifname}" does not exist!'
+ .format(**config))
def verify_source_interface(config):
"""
@@ -70,9 +79,43 @@ def verify_source_interface(config):
required by e.g. peth/MACvlan, MACsec ...
"""
from netifaces import interfaces
- if not 'source_interface' in config.keys():
+ if 'source_interface' not in config:
raise ConfigError('Physical source-interface required for '
'interface "{ifname}"'.format(**config))
- if not config['source_interface'] in interfaces():
- raise ConfigError(f'Source interface {source_interface} does not '
- f'exist'.format(**config))
+ if config['source_interface'] not in interfaces():
+ raise ConfigError('Source interface {source_interface} does not '
+ 'exist'.format(**config))
+
+def verify_dhcpv6(config):
+ """
+ Common helper function used by interface implementations to perform
+ recurring validation of DHCPv6 options which are mutually exclusive.
+ """
+ if {'parameters_only', 'temporary'} <= set(config.get('dhcpv6_options', {})):
+ raise ConfigError('DHCPv6 temporary and parameters-only options '
+ 'are mutually exclusive!')
+
+def verify_vlan_config(config):
+ """
+ Common helper function used by interface implementations to perform
+ recurring validation of interface VLANs
+ """
+ # 802.1q VLANs
+ for vlan in config.get('vif', {}):
+ vlan = config['vif'][vlan]
+ verify_dhcpv6(vlan)
+ verify_address(vlan)
+ verify_vrf(vlan)
+
+ # 802.1ad (Q-in-Q) VLANs
+ for vlan in config.get('vif_s', {}):
+ vlan = config['vif_s'][vlan]
+ verify_dhcpv6(vlan)
+ verify_address(vlan)
+ verify_vrf(vlan)
+
+ for vlan in config.get('vif_s', {}).get('vif_c', {}):
+ vlan = config['vif_c'][vlan]
+ verify_dhcpv6(vlan)
+ verify_address(vlan)
+ verify_vrf(vlan)
diff --git a/python/vyos/ifconfig/__init__.py b/python/vyos/ifconfig/__init__.py
index a7cdeadd1..9cd8d44c1 100644
--- a/python/vyos/ifconfig/__init__.py
+++ b/python/vyos/ifconfig/__init__.py
@@ -13,12 +13,10 @@
# You should have received a copy of the GNU Lesser General Public
# License along with this library. If not, see <http://www.gnu.org/licenses/>.
-
from vyos.ifconfig.section import Section
from vyos.ifconfig.control import Control
from vyos.ifconfig.interface import Interface
from vyos.ifconfig.operational import Operational
-from vyos.ifconfig.dhcp import DHCP
from vyos.ifconfig.vrrp import VRRP
from vyos.ifconfig.bond import BondIf
diff --git a/python/vyos/ifconfig/bond.py b/python/vyos/ifconfig/bond.py
index 47dd4ff34..193cea321 100644
--- a/python/vyos/ifconfig/bond.py
+++ b/python/vyos/ifconfig/bond.py
@@ -14,14 +14,15 @@
# License along with this library. If not, see <http://www.gnu.org/licenses/>.
import os
+import jmespath
from vyos.ifconfig.interface import Interface
from vyos.ifconfig.vlan import VLAN
+from vyos.util import cmd
from vyos.validate import assert_list
from vyos.validate import assert_positive
-
@Interface.register
@VLAN.enable
class BondIf(Interface):
@@ -179,7 +180,13 @@ class BondIf(Interface):
>>> BondIf('bond0').get_arp_ip_target()
'192.0.2.1'
"""
- return self.get_interface('bond_arp_ip_target')
+ # As this function might also be called from update() of a VLAN interface
+ # we must check if the bond_arp_ip_target retrieval worked or not - as this
+ # can not be set for a bond vif interface
+ try:
+ return self.get_interface('bond_arp_ip_target')
+ except FileNotFoundError:
+ return ''
def set_arp_ip_target(self, target):
"""
@@ -209,11 +216,31 @@ class BondIf(Interface):
>>> BondIf('bond0').add_port('eth0')
>>> BondIf('bond0').add_port('eth1')
"""
- # An interface can only be added to a bond if it is in 'down' state. If
- # interface is in 'up' state, the following Kernel error will be thrown:
- # bond0: eth1 is up - this may be due to an out of date ifenslave.
- Interface(interface).set_admin_state('down')
- return self.set_interface('bond_add_port', f'+{interface}')
+
+ # From drivers/net/bonding/bond_main.c:
+ # ...
+ # bond_set_slave_link_state(new_slave,
+ # BOND_LINK_UP,
+ # BOND_SLAVE_NOTIFY_NOW);
+ # ...
+ #
+ # The kernel will ALWAYS place new bond members in "up" state regardless
+ # what the CLI will tell us!
+
+ # Physical interface must be in admin down state before they can be
+ # enslaved. If this is not the case an error will be shown:
+ # bond0: eth0 is up - this may be due to an out of date ifenslave
+ slave = Interface(interface)
+ slave_state = slave.get_admin_state()
+ if slave_state == 'up':
+ slave.set_admin_state('down')
+
+ ret = self.set_interface('bond_add_port', f'+{interface}')
+ # The kernel will ALWAYS place new bond members in "up" state regardless
+ # what the LI is configured for - thus we place the interface in its
+ # desired state
+ slave.set_admin_state(slave_state)
+ return ret
def del_port(self, interface):
"""
@@ -277,3 +304,80 @@ class BondIf(Interface):
>>> BondIf('bond0').set_mode('802.3ad')
"""
return self.set_interface('bond_mode', mode)
+
+ def update(self, config):
+ """ General helper function which works on a dictionary retrived by
+ get_config_dict(). It's main intention is to consolidate the scattered
+ interface setup code and provide a single point of entry when workin
+ on any interface. """
+
+ # use ref-counting function to place an interface into admin down state.
+ # set_admin_state_up() must be called the same amount of times else the
+ # interface won't come up. This can/should be used to prevent link flapping
+ # when changing interface parameters require the interface to be down.
+ # We will disable it once before reconfiguration and enable it afterwards.
+ if 'shutdown_required' in config:
+ self.set_admin_state('down')
+
+ # call base class first
+ super().update(config)
+
+ # ARP monitor targets need to be synchronized between sysfs and CLI.
+ # Unfortunately an address can't be send twice to sysfs as this will
+ # result in the following exception: OSError: [Errno 22] Invalid argument.
+ #
+ # We remove ALL addresses prior to adding new ones, this will remove
+ # addresses manually added by the user too - but as we are limited to 16 adresses
+ # from the kernel side this looks valid to me. We won't run into an error
+ # when a user added manual adresses which would result in having more
+ # then 16 adresses in total.
+ arp_tgt_addr = list(map(str, self.get_arp_ip_target().split()))
+ for addr in arp_tgt_addr:
+ self.set_arp_ip_target('-' + addr)
+
+ # Add configured ARP target addresses
+ value = jmespath.search('arp_monitor.target', config)
+ if isinstance(value, str):
+ value = [value]
+ if value:
+ for addr in value:
+ self.set_arp_ip_target('+' + addr)
+
+ # Bonding transmit hash policy
+ value = config.get('hash_policy')
+ if value: self.set_hash_policy(value)
+
+ # Some interface options can only be changed if the interface is
+ # administratively down
+ if self.get_admin_state() == 'down':
+ # Delete bond member port(s)
+ for interface in self.get_slaves():
+ self.del_port(interface)
+
+ # Bonding policy/mode
+ value = config.get('mode')
+ if value: self.set_mode(value)
+
+ # Add (enslave) interfaces to bond
+ value = jmespath.search('member.interface', config)
+ if value:
+ for interface in value:
+ # if we've come here we already verified the interface
+ # does not have an addresses configured so just flush
+ # any remaining ones
+ Interface(interface).flush_addrs()
+ self.add_port(interface)
+
+ # Primary device interface - must be set after 'mode'
+ value = config.get('primary')
+ if value: self.set_primary(value)
+
+ # Enable/Disable of an interface must always be done at the end of the
+ # derived class to make use of the ref-counting set_admin_state()
+ # function. We will only enable the interface if 'up' was called as
+ # often as 'down'. This is required by some interface implementations
+ # as certain parameters can only be changed when the interface is
+ # in admin-down state. This ensures the link does not flap during
+ # reconfiguration.
+ state = 'down' if 'disable' in config else 'up'
+ self.set_admin_state(state)
diff --git a/python/vyos/ifconfig/bridge.py b/python/vyos/ifconfig/bridge.py
index 44b92c1db..466e6b682 100644
--- a/python/vyos/ifconfig/bridge.py
+++ b/python/vyos/ifconfig/bridge.py
@@ -13,12 +13,13 @@
# You should have received a copy of the GNU Lesser General Public
# License along with this library. If not, see <http://www.gnu.org/licenses/>.
+import jmespath
from vyos.ifconfig.interface import Interface
-
+from vyos.ifconfig.stp import STP
from vyos.validate import assert_boolean
from vyos.validate import assert_positive
-
+from vyos.util import cmd
@Interface.register
class BridgeIf(Interface):
@@ -187,3 +188,77 @@ class BridgeIf(Interface):
>>> BridgeIf('br0').del_port('eth1')
"""
return self.set_interface('del_port', interface)
+
+ def update(self, config):
+ """ General helper function which works on a dictionary retrived by
+ get_config_dict(). It's main intention is to consolidate the scattered
+ interface setup code and provide a single point of entry when workin
+ on any interface. """
+
+ # call base class first
+ super().update(config)
+
+ # Set ageing time
+ value = config.get('aging')
+ self.set_ageing_time(value)
+
+ # set bridge forward delay
+ value = config.get('forwarding_delay')
+ self.set_forward_delay(value)
+
+ # set hello time
+ value = config.get('hello_time')
+ self.set_hello_time(value)
+
+ # set max message age
+ value = config.get('max_age')
+ self.set_max_age(value)
+
+ # set bridge priority
+ value = config.get('priority')
+ self.set_priority(value)
+
+ # enable/disable spanning tree
+ value = '1' if 'stp' in config else '0'
+ self.set_stp(value)
+
+ # enable or disable IGMP querier
+ tmp = jmespath.search('igmp.querier', config)
+ value = '1' if (tmp != None) else '0'
+ self.set_multicast_querier(value)
+
+ # remove interface from bridge
+ tmp = jmespath.search('member.interface_remove', config)
+ if tmp:
+ for member in tmp:
+ self.del_port(member)
+
+ STPBridgeIf = STP.enable(BridgeIf)
+ tmp = jmespath.search('member.interface', config)
+ if tmp:
+ for interface, interface_config in tmp.items():
+ # if we've come here we already verified the interface
+ # does not have an addresses configured so just flush
+ # any remaining ones
+ Interface(interface).flush_addrs()
+ # enslave interface port to bridge
+ self.add_port(interface)
+
+ tmp = STPBridgeIf(interface)
+ # set bridge port path cost
+ value = interface_config.get('cost')
+ tmp.set_path_cost(value)
+
+ # set bridge port path priority
+ value = interface_config.get('priority')
+ tmp.set_path_priority(value)
+
+ # Enable/Disable of an interface must always be done at the end of the
+ # derived class to make use of the ref-counting set_admin_state()
+ # function. We will only enable the interface if 'up' was called as
+ # often as 'down'. This is required by some interface implementations
+ # as certain parameters can only be changed when the interface is
+ # in admin-down state. This ensures the link does not flap during
+ # reconfiguration.
+ state = 'down' if 'disable' in config else 'up'
+ self.set_admin_state(state)
diff --git a/python/vyos/ifconfig/dhcp.py b/python/vyos/ifconfig/dhcp.py
deleted file mode 100644
index a8b9a2a87..000000000
--- a/python/vyos/ifconfig/dhcp.py
+++ /dev/null
@@ -1,136 +0,0 @@
-# Copyright 2020 VyOS maintainers and contributors <maintainers@vyos.io>
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library. If not, see <http://www.gnu.org/licenses/>.
-
-import os
-
-from vyos.dicts import FixedDict
-from vyos.ifconfig.control import Control
-from vyos.template import render
-
-class _DHCPv4 (Control):
- def __init__(self, ifname):
- super().__init__()
- config_base = r'/var/lib/dhcp/dhclient_'
- self.options = FixedDict(**{
- 'ifname': ifname,
- 'hostname': '',
- 'client_id': '',
- 'vendor_class_id': '',
- 'conf_file': config_base + f'{ifname}.conf',
- 'options_file': config_base + f'{ifname}.options',
- 'pid_file': config_base + f'{ifname}.pid',
- 'lease_file': config_base + f'{ifname}.leases',
- })
-
- # replace dhcpv4/v6 with systemd.networkd?
- def set(self):
- """
- Configure interface as DHCP client. The dhclient binary is automatically
- started in background!
-
- Example:
-
- >>> from vyos.ifconfig import Interface
- >>> j = Interface('eth0')
- >>> j.dhcp.v4.set()
- """
- if not self.options['hostname']:
- # read configured system hostname.
- # maybe change to vyos hostd client ???
- with open('/etc/hostname', 'r') as f:
- self.options['hostname'] = f.read().rstrip('\n')
-
- render(self.options['options_file'], 'dhcp-client/daemon-options.tmpl', self.options)
- render(self.options['conf_file'], 'dhcp-client/ipv4.tmpl', self.options)
-
- return self._cmd('systemctl restart dhclient@{ifname}.service'.format(**self.options))
-
- def delete(self):
- """
- De-configure interface as DHCP clinet. All auto generated files like
- pid, config and lease will be removed.
-
- Example:
-
- >>> from vyos.ifconfig import Interface
- >>> j = Interface('eth0')
- >>> j.dhcp.v4.delete()
- """
- if not os.path.isfile(self.options['pid_file']):
- self._debug_msg('No DHCP client PID found')
- return None
-
- self._cmd('systemctl stop dhclient@{ifname}.service'.format(**self.options))
-
- # cleanup old config files
- for name in ('conf_file', 'options_file', 'pid_file', 'lease_file'):
- if os.path.isfile(self.options[name]):
- os.remove(self.options[name])
-
-class _DHCPv6 (Control):
- def __init__(self, ifname):
- super().__init__()
- self.options = FixedDict(**{
- 'ifname': ifname,
- 'dhcpv6_prm_only': False,
- 'dhcpv6_temporary': False,
- 'dhcpv6_pd_interfaces': [],
- 'dhcpv6_pd_length': ''
- })
- self._conf_file = f'/run/dhcp6c/dhcp6c.{ifname}.conf'
-
- def set(self):
- """
- Configure interface as DHCPv6 client. The dhclient binary is automatically
- started in background!
-
- Example:
-
- >>> from vyos.ifconfig import Interface
- >>> j = Interface('eth0')
- >>> j.dhcp.v6.set()
- """
-
- # better save then sorry .. should be checked in interface script
- # but if you missed it we are safe!
- if self.options['dhcpv6_prm_only'] and self.options['dhcpv6_temporary']:
- raise Exception(
- 'DHCPv6 temporary and parameters-only options are mutually exclusive!')
-
- render(self._conf_file, 'dhcp-client/ipv6.tmpl', self.options, trim_blocks=True)
- return self._cmd('systemctl restart dhcp6c@{ifname}.service'.format(**self.options))
-
- def delete(self):
- """
- De-configure interface as DHCPv6 clinet. All auto generated files like
- pid, config and lease will be removed.
-
- Example:
-
- >>> from vyos.ifconfig import Interface
- >>> j = Interface('eth0')
- >>> j.dhcp.v6.delete()
- """
- self._cmd('systemctl stop dhcp6c@{ifname}.service'.format(**self.options))
-
- # cleanup old config files
- if os.path.isfile(self._conf_file):
- os.remove(self._conf_file)
-
-
-class DHCP(object):
- def __init__(self, ifname):
- self.v4 = _DHCPv4(ifname)
- self.v6 = _DHCPv6(ifname)
diff --git a/python/vyos/ifconfig/dummy.py b/python/vyos/ifconfig/dummy.py
index 404c490c7..43614cd1c 100644
--- a/python/vyos/ifconfig/dummy.py
+++ b/python/vyos/ifconfig/dummy.py
@@ -35,3 +35,22 @@ class DummyIf(Interface):
'prefixes': ['dum', ],
},
}
+
+ def update(self, config):
+ """ General helper function which works on a dictionary retrived by
+ get_config_dict(). It's main intention is to consolidate the scattered
+ interface setup code and provide a single point of entry when workin
+ on any interface. """
+
+ # call base class first
+ super().update(config)
+
+ # Enable/Disable of an interface must always be done at the end of the
+ # derived class to make use of the ref-counting set_admin_state()
+ # function. We will only enable the interface if 'up' was called as
+ # often as 'down'. This is required by some interface implementations
+ # as certain parameters can only be changed when the interface is
+ # in admin-down state. This ensures the link does not flap during
+ # reconfiguration.
+ state = 'down' if 'disable' in config else 'up'
+ self.set_admin_state(state)
diff --git a/python/vyos/ifconfig/ethernet.py b/python/vyos/ifconfig/ethernet.py
index 5b18926c9..b2f701e00 100644
--- a/python/vyos/ifconfig/ethernet.py
+++ b/python/vyos/ifconfig/ethernet.py
@@ -15,13 +15,13 @@
import os
import re
+import jmespath
from vyos.ifconfig.interface import Interface
from vyos.ifconfig.vlan import VLAN
from vyos.validate import assert_list
from vyos.util import run
-
@Interface.register
@VLAN.enable
class EthernetIf(Interface):
@@ -252,3 +252,58 @@ class EthernetIf(Interface):
>>> i.set_udp_offload('on')
"""
return self.set_interface('ufo', state)
+
+
+ def update(self, config):
+ """ General helper function which works on a dictionary retrived by
+ get_config_dict(). It's main intention is to consolidate the scattered
+ interface setup code and provide a single point of entry when workin
+ on any interface. """
+
+ # call base class first
+ super().update(config)
+
+ # disable ethernet flow control (pause frames)
+ value = 'off' if 'disable_flow_control' in config.keys() else 'on'
+ self.set_flow_control(value)
+
+ # GRO (generic receive offload)
+ tmp = jmespath.search('offload_options.generic_receive', config)
+ value = tmp if (tmp != None) else 'off'
+ self.set_gro(value)
+
+ # GSO (generic segmentation offload)
+ tmp = jmespath.search('offload_options.generic_segmentation', config)
+ value = tmp if (tmp != None) else 'off'
+ self.set_gso(value)
+
+ # scatter-gather option
+ tmp = jmespath.search('offload_options.scatter_gather', config)
+ value = tmp if (tmp != None) else 'off'
+ self.set_sg(value)
+
+ # TSO (TCP segmentation offloading)
+ tmp = jmespath.search('offload_options.udp_fragmentation', config)
+ value = tmp if (tmp != None) else 'off'
+ self.set_tso(value)
+
+ # UDP fragmentation offloading
+ tmp = jmespath.search('offload_options.udp_fragmentation', config)
+ value = tmp if (tmp != None) else 'off'
+ self.set_ufo(value)
+
+ # Set physical interface speed and duplex
+ if {'speed', 'duplex'} <= set(config):
+ speed = config.get('speed')
+ duplex = config.get('duplex')
+ self.set_speed_duplex(speed, duplex)
+
+ # Enable/Disable of an interface must always be done at the end of the
+ # derived class to make use of the ref-counting set_admin_state()
+ # function. We will only enable the interface if 'up' was called as
+ # often as 'down'. This is required by some interface implementations
+ # as certain parameters can only be changed when the interface is
+ # in admin-down state. This ensures the link does not flap during
+ # reconfiguration.
+ state = 'down' if 'disable' in config else 'up'
+ self.set_admin_state(state)
diff --git a/python/vyos/ifconfig/interface.py b/python/vyos/ifconfig/interface.py
index 8d7b247fc..36f258301 100644
--- a/python/vyos/ifconfig/interface.py
+++ b/python/vyos/ifconfig/interface.py
@@ -16,7 +16,10 @@
import os
import re
import json
+import jmespath
+
from copy import deepcopy
+from glob import glob
from ipaddress import IPv4Network
from ipaddress import IPv6Address
@@ -28,6 +31,8 @@ from netifaces import AF_INET6
from vyos import ConfigError
from vyos.configdict import list_diff
+from vyos.configdict import dict_merge
+from vyos.template import render
from vyos.util import mac2eui64
from vyos.validate import is_ipv4
from vyos.validate import is_ipv6
@@ -40,11 +45,17 @@ from vyos.validate import assert_positive
from vyos.validate import assert_range
from vyos.ifconfig.control import Control
-from vyos.ifconfig.dhcp import DHCP
from vyos.ifconfig.vrrp import VRRP
from vyos.ifconfig.operational import Operational
from vyos.ifconfig import Section
+def get_ethertype(ethertype_val):
+ if ethertype_val == '0x88A8':
+ return '802.1ad'
+ elif ethertype_val == '0x8100':
+ return '802.1q'
+ else:
+ raise ConfigError('invalid ethertype "{}"'.format(ethertype_val))
class Interface(Control):
# This is the class which will be used to create
@@ -72,8 +83,12 @@ class Interface(Control):
_command_get = {
'admin_state': {
'shellcmd': 'ip -json link show dev {ifname}',
- 'format': lambda j: 'up' if 'UP' in json.loads(j)[0]['flags'] else 'down',
- }
+ 'format': lambda j: 'up' if 'UP' in jmespath.search('[*].flags | [0]', json.loads(j)) else 'down',
+ },
+ 'vlan_protocol': {
+ 'shellcmd': 'ip -json -details link show dev {ifname}',
+ 'format': lambda j: jmespath.search('[*].linkinfo.info_data.protocol | [0]', json.loads(j)),
+ },
}
_command_set = {
@@ -197,11 +212,11 @@ class Interface(Control):
# make sure the ifname is the first argument and not from the dict
self.config['ifname'] = ifname
+ self._admin_state_down_cnt = 0
# we must have updated config before initialising the Interface
super().__init__(**kargs)
self.ifname = ifname
- self.dhcp = DHCP(ifname)
if not self.exists(ifname):
# Any instance of Interface, such as Interface('eth0')
@@ -322,11 +337,11 @@ class Interface(Control):
self.set_admin_state('down')
self.set_interface('mac', mac)
-
+
# Turn an interface to the 'up' state if it was changed to 'down' by this fucntion
if prev_state == 'up':
self.set_admin_state('up')
-
+
def set_vrf(self, vrf=''):
"""
Add/Remove interface from given VRF instance.
@@ -543,6 +558,17 @@ class Interface(Control):
"""
self.set_interface('alias', ifalias)
+ def get_vlan_protocol(self):
+ """
+ Retrieve VLAN protocol in use, this can be 802.1Q, 802.1ad or None
+
+ Example:
+ >>> from vyos.ifconfig import Interface
+ >>> Interface('eth0.10').get_vlan_protocol()
+ '802.1Q'
+ """
+ return self.get_interface('vlan_protocol')
+
def get_admin_state(self):
"""
Get interface administrative state. Function will return 'up' or 'down'
@@ -564,7 +590,24 @@ class Interface(Control):
>>> Interface('eth0').get_admin_state()
'down'
"""
- return self.set_interface('admin_state', state)
+ # A VLAN interface can only be placed in admin up state when
+ # the lower interface is up, too
+ if self.get_vlan_protocol():
+ lower_interface = glob(f'/sys/class/net/{self.ifname}/lower*/flags')[0]
+ with open(lower_interface, 'r') as f:
+ flags = f.read()
+ # If parent is not up - bail out as we can not bring up the VLAN.
+ # Flags are defined in kernel source include/uapi/linux/if.h
+ if not int(flags, 16) & 1:
+ return None
+
+ if state == 'up':
+ self._admin_state_down_cnt -= 1
+ if self._admin_state_down_cnt < 1:
+ return self.set_interface('admin_state', state)
+ else:
+ self._admin_state_down_cnt += 1
+ return self.set_interface('admin_state', state)
def set_proxy_arp(self, enable):
"""
@@ -679,9 +722,9 @@ class Interface(Control):
# add to interface
if addr == 'dhcp':
- self.dhcp.v4.set()
+ self.set_dhcp(True)
elif addr == 'dhcpv6':
- self.dhcp.v6.set()
+ self.set_dhcpv6(True)
elif not is_intf_addr_assigned(self.ifname, addr):
self._cmd(f'ip addr add "{addr}" '
f'{"brd + " if addr_is_v4 else ""}dev "{self.ifname}"')
@@ -720,9 +763,9 @@ class Interface(Control):
# remove from interface
if addr == 'dhcp':
- self.dhcp.v4.delete()
+ self.set_dhcp(False)
elif addr == 'dhcpv6':
- self.dhcp.v6.delete()
+ self.set_dhcpv6(False)
elif is_intf_addr_assigned(self.ifname, addr):
self._cmd(f'ip addr del "{addr}" dev "{self.ifname}"')
else:
@@ -741,8 +784,8 @@ class Interface(Control):
Will raise an exception on error.
"""
# stop DHCP(v6) if running
- self.dhcp.v4.delete()
- self.dhcp.v6.delete()
+ self.set_dhcp(False)
+ self.set_dhcpv6(False)
# flush all addresses
self._cmd(f'ip addr flush dev "{self.ifname}"')
@@ -766,21 +809,95 @@ class Interface(Control):
return True
+ def set_dhcp(self, enable):
+ """
+ Enable/Disable DHCP client on a given interface.
+ """
+ if enable not in [True, False]:
+ raise ValueError()
+
+ ifname = self.ifname
+ config_base = r'/var/lib/dhcp/dhclient'
+ config_file = f'{config_base}_{ifname}.conf'
+ options_file = f'{config_base}_{ifname}.options'
+ pid_file = f'{config_base}_{ifname}.pid'
+ lease_file = f'{config_base}_{ifname}.leases'
+
+ if enable and 'disable' not in self._config:
+ if jmespath.search('dhcp_options.host_name', self._config) == None:
+ # read configured system hostname.
+ # maybe change to vyos hostd client ???
+ hostname = 'vyos'
+ with open('/etc/hostname', 'r') as f:
+ hostname = f.read().rstrip('\n')
+ tmp = {'dhcp_options' : { 'host_name' : hostname}}
+ self._config = dict_merge(tmp, self._config)
+
+ render(options_file, 'dhcp-client/daemon-options.tmpl',
+ self._config, trim_blocks=True)
+ render(config_file, 'dhcp-client/ipv4.tmpl',
+ self._config, trim_blocks=True)
+
+ # 'up' check is mandatory b/c even if the interface is A/D, as soon as
+ # the DHCP client is started the interface will be placed in u/u state.
+ # This is not what we intended to do when disabling an interface.
+ return self._cmd(f'systemctl restart dhclient@{ifname}.service')
+ else:
+ self._cmd(f'systemctl stop dhclient@{ifname}.service')
+
+ # cleanup old config files
+ for file in [config_file, options_file, pid_file, lease_file]:
+ if os.path.isfile(file):
+ os.remove(file)
+
+
+ def set_dhcpv6(self, enable):
+ """
+ Enable/Disable DHCPv6 client on a given interface.
+ """
+ if enable not in [True, False]:
+ raise ValueError()
+
+ ifname = self.ifname
+ config_file = f'/run/dhcp6c/dhcp6c.{ifname}.conf'
+
+ if enable and 'disable' not in self._config:
+ render(config_file, 'dhcp-client/ipv6.tmpl',
+ self._config, trim_blocks=True)
+
+ # We must ignore any return codes. This is required to enable DHCPv6-PD
+ # for interfaces which are yet not up and running.
+ return self._popen(f'systemctl restart dhcp6c@{ifname}.service')
+ else:
+ self._popen(f'systemctl stop dhcp6c@{ifname}.service')
+
+ if os.path.isfile(config_file):
+ os.remove(config_file)
+
+
def update(self, config):
""" General helper function which works on a dictionary retrived by
get_config_dict(). It's main intention is to consolidate the scattered
interface setup code and provide a single point of entry when workin
on any interface. """
+ # Cache the configuration - it will be reused inside e.g. DHCP handler
+ # XXX: maybe pass the option via __init__ in the future and rename this
+ # method to apply()?
+ self._config = config
+
# Update interface description
- self.set_alias(config.get('description', None))
+ self.set_alias(config.get('description', ''))
+
+ # Ignore link state changes
+ value = '2' if 'disable_link_detect' in config else '1'
+ self.set_link_detect(value)
# Configure assigned interface IP addresses. No longer
# configured addresses will be removed first
new_addr = config.get('address', [])
- # XXX workaround for T2636, convert IP address string to a list
- # with one element
+ # XXX: T2636 workaround: convert string to a list with one element
if isinstance(new_addr, str):
new_addr = [new_addr]
@@ -796,10 +913,140 @@ class Interface(Control):
# There are some items in the configuration which can only be applied
# if this instance is not bound to a bridge. This should be checked
# by the caller but better save then sorry!
- if not config.get('is_bridge_member', False):
- # Bind interface instance into VRF
+ if not any(k in ['is_bond_member', 'is_bridge_member'] for k in config):
+ # Bind interface to given VRF or unbind it if vrf node is not set.
+ # unbinding will call 'ip link set dev eth0 nomaster' which will
+ # also drop the interface out of a bridge or bond - thus this is
+ # checked before
self.set_vrf(config.get('vrf', ''))
- # Interface administrative state
- state = 'down' if 'disable' in config.keys() else 'up'
- self.set_admin_state(state)
+ # Configure ARP cache timeout in milliseconds - has default value
+ tmp = jmespath.search('ip.arp_cache_timeout', config)
+ value = tmp if (tmp != None) else '30'
+ self.set_arp_cache_tmo(value)
+
+ # Configure ARP filter configuration
+ tmp = jmespath.search('ip.disable_arp_filter', config)
+ value = '0' if (tmp != None) else '1'
+ self.set_arp_filter(value)
+
+ # Configure ARP accept
+ tmp = jmespath.search('ip.enable_arp_accept', config)
+ value = '1' if (tmp != None) else '0'
+ self.set_arp_accept(value)
+
+ # Configure ARP announce
+ tmp = jmespath.search('ip.enable_arp_announce', config)
+ value = '1' if (tmp != None) else '0'
+ self.set_arp_announce(value)
+
+ # Configure ARP ignore
+ tmp = jmespath.search('ip.enable_arp_ignore', config)
+ value = '1' if (tmp != None) else '0'
+ self.set_arp_ignore(value)
+
+ # Enable proxy-arp on this interface
+ tmp = jmespath.search('ip.enable_proxy_arp', config)
+ value = '1' if (tmp != None) else '0'
+ self.set_proxy_arp(value)
+
+ # Enable private VLAN proxy ARP on this interface
+ tmp = jmespath.search('ip.proxy_arp_pvlan', config)
+ value = '1' if (tmp != None) else '0'
+ self.set_proxy_arp_pvlan(value)
+
+ # IPv6 forwarding
+ tmp = jmespath.search('ipv6.disable_forwarding', config)
+ value = '0' if (tmp != None) else '1'
+ self.set_ipv6_forwarding(value)
+
+ # IPv6 router advertisements
+ tmp = jmespath.search('ipv6.address.autoconf', config)
+ value = '2' if (tmp != None) else '1'
+ if 'dhcpv6' in new_addr:
+ value = '2'
+ self.set_ipv6_accept_ra(value)
+
+ # IPv6 address autoconfiguration
+ tmp = jmespath.search('ipv6.address.autoconf', config)
+ value = '1' if (tmp != None) else '0'
+ self.set_ipv6_autoconf(value)
+
+ # IPv6 Duplicate Address Detection (DAD) tries
+ tmp = jmespath.search('ipv6.dup_addr_detect_transmits', config)
+ value = tmp if (tmp != None) else '1'
+ self.set_ipv6_dad_messages(value)
+
+ # MTU - Maximum Transfer Unit
+ if 'mtu' in config:
+ self.set_mtu(config.get('mtu'))
+
+ # Delete old IPv6 EUI64 addresses before changing MAC
+ tmp = jmespath.search('ipv6.address.eui64_old', config)
+ if tmp:
+ for addr in tmp:
+ self.del_ipv6_eui64_address(addr)
+
+ # Change interface MAC address - re-set to real hardware address (hw-id)
+ # if custom mac is removed. Skip if bond member.
+ if 'is_bond_member' not in config:
+ mac = config.get('hw_id')
+ if 'mac' in config:
+ mac = config.get('mac')
+ if mac:
+ self.set_mac(mac)
+
+ # Manage IPv6 link-local addresses
+ tmp = jmespath.search('ipv6.address.no_default_link_local', config)
+ # we must check explicitly for None type as if the key is set we will
+ # get an empty dict (<class 'dict'>)
+ if tmp is not None:
+ self.del_ipv6_eui64_address('fe80::/64')
+ else:
+ self.add_ipv6_eui64_address('fe80::/64')
+
+ # Add IPv6 EUI-based addresses
+ tmp = jmespath.search('ipv6.address.eui64', config)
+ if tmp:
+ # XXX: T2636 workaround: convert string to a list with one element
+ if isinstance(tmp, str):
+ tmp = [tmp]
+ for addr in tmp:
+ self.add_ipv6_eui64_address(addr)
+
+ # re-add ourselves to any bridge we might have fallen out of
+ if 'is_bridge_member' in config:
+ bridge = config.get('is_bridge_member')
+ self.add_to_bridge(bridge)
+
+ # remove no longer required 802.1ad (Q-in-Q VLANs)
+ for vif_s_id in config.get('vif_s_remove', {}):
+ self.del_vlan(vif_s_id)
+
+ # create/update 802.1ad (Q-in-Q VLANs)
+ ifname = config['ifname']
+ for vif_s_id, vif_s in config.get('vif_s', {}).items():
+ tmp=get_ethertype(vif_s.get('ethertype', '0x88A8'))
+ s_vlan = self.add_vlan(vif_s_id, ethertype=tmp)
+ vif_s['ifname'] = f'{ifname}.{vif_s_id}'
+ s_vlan.update(vif_s)
+
+ # remove no longer required client VLAN (vif-c)
+ for vif_c_id in vif_s.get('vif_c_remove', {}):
+ s_vlan.del_vlan(vif_c_id)
+
+ # create/update client VLAN (vif-c) interface
+ for vif_c_id, vif_c in vif_s.get('vif_c', {}).items():
+ c_vlan = s_vlan.add_vlan(vif_c_id)
+ vif_c['ifname'] = f'{ifname}.{vif_s_id}.{vif_c_id}'
+ c_vlan.update(vif_c)
+
+ # remove no longer required 802.1q VLAN interfaces
+ for vif_id in config.get('vif_remove', {}):
+ self.del_vlan(vif_id)
+
+ # create/update 802.1q VLAN interfaces
+ for vif_id, vif in config.get('vif', {}).items():
+ vlan = self.add_vlan(vif_id)
+ vif['ifname'] = f'{ifname}.{vif_id}'
+ vlan.update(vif)
diff --git a/python/vyos/ifconfig/loopback.py b/python/vyos/ifconfig/loopback.py
index 7ebd13b54..2b4ebfdcc 100644
--- a/python/vyos/ifconfig/loopback.py
+++ b/python/vyos/ifconfig/loopback.py
@@ -75,5 +75,15 @@ class LoopbackIf(Interface):
# Update IP address entry in our dictionary
config.update({'address' : addr})
- # now call the regular function from within our base class
+ # call base class
super().update(config)
+
+ # Enable/Disable of an interface must always be done at the end of the
+ # derived class to make use of the ref-counting set_admin_state()
+ # function. We will only enable the interface if 'up' was called as
+ # often as 'down'. This is required by some interface implementations
+ # as certain parameters can only be changed when the interface is
+ # in admin-down state. This ensures the link does not flap during
+ # reconfiguration.
+ state = 'down' if 'disable' in config else 'up'
+ self.set_admin_state(state)
diff --git a/python/vyos/ifconfig/macsec.py b/python/vyos/ifconfig/macsec.py
index ea8c9807e..6f570d162 100644
--- a/python/vyos/ifconfig/macsec.py
+++ b/python/vyos/ifconfig/macsec.py
@@ -71,3 +71,22 @@ class MACsecIf(Interface):
'source_interface': '',
}
return config
+
+ def update(self, config):
+ """ General helper function which works on a dictionary retrived by
+ get_config_dict(). It's main intention is to consolidate the scattered
+ interface setup code and provide a single point of entry when workin
+ on any interface. """
+
+ # call base class first
+ super().update(config)
+
+ # Enable/Disable of an interface must always be done at the end of the
+ # derived class to make use of the ref-counting set_admin_state()
+ # function. We will only enable the interface if 'up' was called as
+ # often as 'down'. This is required by some interface implementations
+ # as certain parameters can only be changed when the interface is
+ # in admin-down state. This ensures the link does not flap during
+ # reconfiguration.
+ state = 'down' if 'disable' in config else 'up'
+ self.set_admin_state(state)
diff --git a/python/vyos/ifconfig/macvlan.py b/python/vyos/ifconfig/macvlan.py
index b5481f4a7..b068ce873 100644
--- a/python/vyos/ifconfig/macvlan.py
+++ b/python/vyos/ifconfig/macvlan.py
@@ -68,3 +68,22 @@ class MACVLANIf(Interface):
>> dict = MACVLANIf().get_config()
"""
return deepcopy(cls.default)
+
+ def update(self, config):
+ """ General helper function which works on a dictionary retrived by
+ get_config_dict(). It's main intention is to consolidate the scattered
+ interface setup code and provide a single point of entry when workin
+ on any interface. """
+
+ # call base class first
+ super().update(config)
+
+ # Enable/Disable of an interface must always be done at the end of the
+ # derived class to make use of the ref-counting set_admin_state()
+ # function. We will only enable the interface if 'up' was called as
+ # often as 'down'. This is required by some interface implementations
+ # as certain parameters can only be changed when the interface is
+ # in admin-down state. This ensures the link does not flap during
+ # reconfiguration.
+ state = 'down' if 'disable' in config else 'up'
+ self.set_admin_state(state)
diff --git a/python/vyos/ifconfig/vxlan.py b/python/vyos/ifconfig/vxlan.py
index 973b4ef05..0dddab7b7 100644
--- a/python/vyos/ifconfig/vxlan.py
+++ b/python/vyos/ifconfig/vxlan.py
@@ -47,8 +47,8 @@ class VXLANIf(Interface):
'port': 8472, # The Linux implementation of VXLAN pre-dates
# the IANA's selection of a standard destination port
'remote': '',
- 'src_address': '',
- 'src_interface': '',
+ 'source_address': '',
+ 'source_interface': '',
'vni': 0
}
definition = {
@@ -60,29 +60,29 @@ class VXLANIf(Interface):
}
}
options = Interface.options + \
- ['group', 'remote', 'src_interface', 'port', 'vni', 'src_address']
+ ['group', 'remote', 'source_interface', 'port', 'vni', 'source_address']
mapping = {
'ifname': 'add',
'vni': 'id',
'port': 'dstport',
- 'src_address': 'local',
- 'src_interface': 'dev',
+ 'source_address': 'local',
+ 'source_interface': 'dev',
}
def _create(self):
cmdline = ['ifname', 'type', 'vni', 'port']
- if self.config['src_address']:
- cmdline.append('src_address')
+ if self.config['source_address']:
+ cmdline.append('source_address')
if self.config['remote']:
cmdline.append('remote')
- if self.config['group'] or self.config['src_interface']:
- if self.config['group'] and self.config['src_interface']:
+ if self.config['group'] or self.config['source_interface']:
+ if self.config['group'] and self.config['source_interface']:
cmdline.append('group')
- cmdline.append('src_interface')
+ cmdline.append('source_interface')
else:
ifname = self.config['ifname']
raise ConfigError(
diff --git a/python/vyos/ifconfig/wireguard.py b/python/vyos/ifconfig/wireguard.py
index 62ca57ca2..fad4ef282 100644
--- a/python/vyos/ifconfig/wireguard.py
+++ b/python/vyos/ifconfig/wireguard.py
@@ -24,7 +24,7 @@ from hurry.filesize import alternative
from vyos.config import Config
from vyos.ifconfig import Interface
from vyos.ifconfig import Operational
-
+from vyos.validate import is_ipv6
class WireGuardOperational(Operational):
def _dump(self):
@@ -169,65 +169,79 @@ class WireGuardIf(Interface):
['port', 'private_key', 'pubkey', 'psk',
'allowed_ips', 'fwmark', 'endpoint', 'keepalive']
- """
- Wireguard interface class, contains a comnfig dictionary since
- wireguard VPN is being comnfigured via the wg command rather than
- writing the config into a file. Otherwise if a pre-shared key is used
- (symetric enryption key), it would we exposed within multiple files.
- Currently it's only within the config.boot if the config was saved.
-
- Example:
- >>> from vyos.ifconfig import WireGuardIf as wg_if
- >>> wg_intfc = wg_if("wg01")
- >>> print (wg_intfc.wg_config)
- {'private_key': None, 'keepalive': 0, 'endpoint': None, 'port': 0,
- 'allowed_ips': [], 'pubkey': None, 'fwmark': 0, 'psk': '/dev/null'}
- >>> wg_intfc.wg_config['keepalive'] = 100
- >>> print (wg_intfc.wg_config)
- {'private_key': None, 'keepalive': 100, 'endpoint': None, 'port': 0,
- 'allowed_ips': [], 'pubkey': None, 'fwmark': 0, 'psk': '/dev/null'}
- """
-
- def update(self):
- if not self.config['private_key']:
- raise ValueError("private key required")
- else:
- # fmask permission check?
- pass
-
- cmd = 'wg set {ifname}'.format(**self.config)
- cmd += ' listen-port {port}'.format(**self.config)
- cmd += ' fwmark "{fwmark}" '.format(**self.config)
- cmd += ' private-key {private_key}'.format(**self.config)
- cmd += ' peer {pubkey}'.format(**self.config)
- cmd += ' persistent-keepalive {keepalive}'.format(**self.config)
- # allowed-ips must be properly quoted else the interface can't be properly
- # created as the wg utility will tread multiple IP addresses as command
- # parameters
- cmd += ' allowed-ips "{}"'.format(','.join(self.config['allowed-ips']))
-
- if self.config['endpoint']:
- cmd += ' endpoint "{endpoint}"'.format(**self.config)
-
- psk_file = ''
- if self.config['psk']:
- psk_file = '/tmp/{ifname}.psk'.format(**self.config)
- with open(psk_file, 'w') as f:
- f.write(self.config['psk'])
+ def update(self, config):
+ """ General helper function which works on a dictionary retrived by
+ get_config_dict(). It's main intention is to consolidate the scattered
+ interface setup code and provide a single point of entry when workin
+ on any interface. """
+
+ # remove no longer associated peers first
+ if 'peer_remove' in config:
+ for tmp in config['peer_remove']:
+ peer = config['peer_remove'][tmp]
+ peer['ifname'] = config['ifname']
+
+ cmd = 'wg set {ifname} peer {pubkey} remove'
+ self._cmd(cmd.format(**peer))
+
+ # Wireguard base command is identical for every peer
+ base_cmd = 'wg set {ifname} private-key {private_key}'
+ if 'port' in config:
+ base_cmd += ' listen-port {port}'
+ if 'fwmark' in config:
+ base_cmd += ' fwmark {fwmark}'
+
+ base_cmd = base_cmd.format(**config)
+
+ for tmp in config['peer']:
+ peer = config['peer'][tmp]
+
+ # start of with a fresh 'wg' command
+ cmd = base_cmd + ' peer {pubkey}'
+
+ # If no PSK is given remove it by using /dev/null - passing keys via
+ # the shell (usually bash) is considered insecure, thus we use a file
+ no_psk_file = '/dev/null'
+ psk_file = no_psk_file
+ if 'preshared_key' in peer:
+ psk_file = '/tmp/tmp.wireguard.psk'
+ with open(psk_file, 'w') as f:
+ f.write(peer['preshared_key'])
cmd += f' preshared-key {psk_file}'
- self._cmd(cmd)
-
- # PSK key file is not required to be stored persistently as its backed by CLI
- if os.path.exists(psk_file):
- os.remove(psk_file)
-
- def remove_peer(self, peerkey):
- """
- Remove a peer of an interface, peers are identified by their public key.
- Giving it a readable name is a vyos feature, to remove a peer the pubkey
- and the interface is needed, to remove the entry.
- """
- cmd = "wg set {0} peer {1} remove".format(
- self.config['ifname'], str(peerkey))
- return self._cmd(cmd)
+ # Persistent keepalive is optional
+ if 'persistent_keepalive'in peer:
+ cmd += ' persistent-keepalive {persistent_keepalive}'
+
+ # Multiple allowed-ip ranges can be defined - ensure we are always
+ # dealing with a list
+ if isinstance(peer['allowed_ips'], str):
+ peer['allowed_ips'] = [peer['allowed_ips']]
+ cmd += ' allowed-ips ' + ','.join(peer['allowed_ips'])
+
+ # Endpoint configuration is optional
+ if {'address', 'port'} <= set(peer):
+ if is_ipv6(config['address']):
+ cmd += ' endpoint [{address}]:{port}'
+ else:
+ cmd += ' endpoint {address}:{port}'
+
+ self._cmd(cmd.format(**peer))
+
+ # PSK key file is not required to be stored persistently as its backed by CLI
+ if psk_file != no_psk_file and os.path.exists(psk_file):
+ os.remove(psk_file)
+
+ # call base class
+ super().update(config)
+
+ # Enable/Disable of an interface must always be done at the end of the
+ # derived class to make use of the ref-counting set_admin_state()
+ # function. We will only enable the interface if 'up' was called as
+ # often as 'down'. This is required by some interface implementations
+ # as certain parameters can only be changed when the interface is
+ # in admin-down state. This ensures the link does not flap during
+ # reconfiguration.
+ state = 'down' if 'disable' in config else 'up'
+ self.set_admin_state(state)
+
diff --git a/python/vyos/ifconfig_vlan.py b/python/vyos/ifconfig_vlan.py
deleted file mode 100644
index 442cb0db8..000000000
--- a/python/vyos/ifconfig_vlan.py
+++ /dev/null
@@ -1,245 +0,0 @@
-# Copyright 2019-2020 VyOS maintainers and contributors <maintainers@vyos.io>
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library. If not, see <http://www.gnu.org/licenses/>.
-
-from netifaces import interfaces
-from vyos import ConfigError
-
-def apply_all_vlans(intf, intfconfig):
- """
- Function applies all VLANs to the passed interface.
-
- intf: object of Interface class
- intfconfig: dict with interface configuration
- """
- # remove no longer required service VLAN interfaces (vif-s)
- for vif_s in intfconfig['vif_s_remove']:
- intf.del_vlan(vif_s)
-
- # create service VLAN interfaces (vif-s)
- for vif_s_id, vif_s in intfconfig['vif_s'].items():
- s_vlan = intf.add_vlan(vif_s_id, ethertype=vif_s['ethertype'])
- apply_vlan_config(s_vlan, vif_s)
-
- # remove no longer required client VLAN interfaces (vif-c)
- # on lower service VLAN interface
- for vif_c in vif_s['vif_c_remove']:
- s_vlan.del_vlan(vif_c)
-
- # create client VLAN interfaces (vif-c)
- # on lower service VLAN interface
- for vif_c_id, vif_c in vif_s['vif_c'].items():
- c_vlan = s_vlan.add_vlan(vif_c_id)
- apply_vlan_config(c_vlan, vif_c)
-
- # remove no longer required VLAN interfaces (vif)
- for vif in intfconfig['vif_remove']:
- intf.del_vlan(vif)
-
- # create VLAN interfaces (vif)
- for vif_id, vif in intfconfig['vif'].items():
- # QoS priority mapping can only be set during interface creation
- # so we delete the interface first if required.
- if vif['egress_qos_changed'] or vif['ingress_qos_changed']:
- try:
- # on system bootup the above condition is true but the interface
- # does not exists, which throws an exception, but that's legal
- intf.del_vlan(vif_id)
- except:
- pass
-
- vlan = intf.add_vlan(vif_id, ingress_qos=vif['ingress_qos'], egress_qos=vif['egress_qos'])
- apply_vlan_config(vlan, vif)
-
-
-def apply_vlan_config(vlan, config):
- """
- Generic function to apply a VLAN configuration from a dictionary
- to a VLAN interface
- """
-
- if not vlan.definition['vlan']:
- raise TypeError()
-
- if config['dhcp_client_id']:
- vlan.dhcp.v4.options['client_id'] = config['dhcp_client_id']
-
- if config['dhcp_hostname']:
- vlan.dhcp.v4.options['hostname'] = config['dhcp_hostname']
-
- if config['dhcp_vendor_class_id']:
- vlan.dhcp.v4.options['vendor_class_id'] = config['dhcp_vendor_class_id']
-
- if config['dhcpv6_prm_only']:
- vlan.dhcp.v6.options['dhcpv6_prm_only'] = True
-
- if config['dhcpv6_temporary']:
- vlan.dhcp.v6.options['dhcpv6_temporary'] = True
-
- if config['dhcpv6_pd_length']:
- vlan.dhcp.v6.options['dhcpv6_pd_length'] = config['dhcpv6_pd_length']
-
- if config['dhcpv6_pd_interfaces']:
- vlan.dhcp.v6.options['dhcpv6_pd_interfaces'] = config['dhcpv6_pd_interfaces']
-
- # update interface description used e.g. within SNMP
- vlan.set_alias(config['description'])
- # ignore link state changes
- vlan.set_link_detect(config['disable_link_detect'])
- # configure ARP filter configuration
- vlan.set_arp_filter(config['ip_disable_arp_filter'])
- # configure ARP accept
- vlan.set_arp_accept(config['ip_enable_arp_accept'])
- # configure ARP announce
- vlan.set_arp_announce(config['ip_enable_arp_announce'])
- # configure ARP ignore
- vlan.set_arp_ignore(config['ip_enable_arp_ignore'])
- # configure Proxy ARP
- vlan.set_proxy_arp(config['ip_proxy_arp'])
- # IPv6 accept RA
- vlan.set_ipv6_accept_ra(config['ipv6_accept_ra'])
- # IPv6 address autoconfiguration
- vlan.set_ipv6_autoconf(config['ipv6_autoconf'])
- # IPv6 forwarding
- vlan.set_ipv6_forwarding(config['ipv6_forwarding'])
- # IPv6 Duplicate Address Detection (DAD) tries
- vlan.set_ipv6_dad_messages(config['ipv6_dup_addr_detect'])
- # Maximum Transmission Unit (MTU)
- vlan.set_mtu(config['mtu'])
-
- # assign/remove VRF (ONLY when not a member of a bridge,
- # otherwise 'nomaster' removes it from it)
- if not config['is_bridge_member']:
- vlan.set_vrf(config['vrf'])
-
- # Delete old IPv6 EUI64 addresses before changing MAC
- for addr in config['ipv6_eui64_prefix_remove']:
- vlan.del_ipv6_eui64_address(addr)
-
- # Change VLAN interface MAC address
- if config['mac']:
- vlan.set_mac(config['mac'])
-
- # Add IPv6 EUI-based addresses
- for addr in config['ipv6_eui64_prefix']:
- vlan.add_ipv6_eui64_address(addr)
-
- # enable/disable VLAN interface
- if config['disable']:
- vlan.set_admin_state('down')
- else:
- vlan.set_admin_state('up')
-
- # Configure interface address(es)
- # - not longer required addresses get removed first
- # - newly addresses will be added second
- for addr in config['address_remove']:
- vlan.del_addr(addr)
- for addr in config['address']:
- vlan.add_addr(addr)
-
- # re-add ourselves to any bridge we might have fallen out of
- if config['is_bridge_member']:
- vlan.add_to_bridge(config['is_bridge_member'])
-
-def verify_vlan_config(config):
- """
- Generic function to verify VLAN config consistency. Instead of re-
- implementing this function in multiple places use single source \o/
- """
-
- # config['vif'] is a dict with ids as keys and config dicts as values
- for vif in config['vif'].values():
- # DHCPv6 parameters-only and temporary address are mutually exclusive
- if vif['dhcpv6_prm_only'] and vif['dhcpv6_temporary']:
- raise ConfigError('DHCPv6 temporary and parameters-only options are mutually exclusive!')
-
- if ( vif['is_bridge_member']
- and ( vif['address']
- or vif['ipv6_eui64_prefix']
- or vif['ipv6_autoconf'] ) ):
- raise ConfigError((
- f'Cannot assign address to vif interface {vif["intf"]} '
- f'which is a member of bridge {vif["is_bridge_member"]}'))
-
- if vif['vrf']:
- if vif['vrf'] not in interfaces():
- raise ConfigError(f'VRF "{vif["vrf"]}" does not exist')
-
- if vif['is_bridge_member']:
- raise ConfigError((
- f'vif {vif["intf"]} cannot be member of VRF {vif["vrf"]} '
- f'and bridge {vif["is_bridge_member"]} at the same time!'))
-
- # e.g. wireless interface has no vif_s support
- # thus we bail out eraly.
- if 'vif_s' not in config.keys():
- return
-
- # config['vif_s'] is a dict with ids as keys and config dicts as values
- for vif_s_id, vif_s in config['vif_s'].items():
- for vif_id, vif in config['vif'].items():
- if vif_id == vif_s_id:
- raise ConfigError((
- f'Cannot use identical ID on vif "{vif["intf"]}" '
- f'and vif-s "{vif_s["intf"]}"'))
-
- # DHCPv6 parameters-only and temporary address are mutually exclusive
- if vif_s['dhcpv6_prm_only'] and vif_s['dhcpv6_temporary']:
- raise ConfigError((
- 'DHCPv6 temporary and parameters-only options are mutually '
- 'exclusive!'))
-
- if ( vif_s['is_bridge_member']
- and ( vif_s['address']
- or vif_s['ipv6_eui64_prefix']
- or vif_s['ipv6_autoconf'] ) ):
- raise ConfigError((
- f'Cannot assign address to vif-s interface {vif_s["intf"]} '
- f'which is a member of bridge {vif_s["is_bridge_member"]}'))
-
- if vif_s['vrf']:
- if vif_s['vrf'] not in interfaces():
- raise ConfigError(f'VRF "{vif_s["vrf"]}" does not exist')
-
- if vif_s['is_bridge_member']:
- raise ConfigError((
- f'vif-s {vif_s["intf"]} cannot be member of VRF {vif_s["vrf"]} '
- f'and bridge {vif_s["is_bridge_member"]} at the same time!'))
-
- # vif_c is a dict with ids as keys and config dicts as values
- for vif_c in vif_s['vif_c'].values():
- # DHCPv6 parameters-only and temporary address are mutually exclusive
- if vif_c['dhcpv6_prm_only'] and vif_c['dhcpv6_temporary']:
- raise ConfigError((
- 'DHCPv6 temporary and parameters-only options are '
- 'mutually exclusive!'))
-
- if ( vif_c['is_bridge_member']
- and ( vif_c['address']
- or vif_c['ipv6_eui64_prefix']
- or vif_c['ipv6_autoconf'] ) ):
- raise ConfigError((
- f'Cannot assign address to vif-c interface {vif_c["intf"]} '
- f'which is a member of bridge {vif_c["is_bridge_member"]}'))
-
- if vif_c['vrf']:
- if vif_c['vrf'] not in interfaces():
- raise ConfigError(f'VRF "{vif_c["vrf"]}" does not exist')
-
- if vif_c['is_bridge_member']:
- raise ConfigError((
- f'vif-c {vif_c["intf"]} cannot be member of VRF {vif_c["vrf"]} '
- f'and bridge {vif_c["is_bridge_member"]} at the same time!'))
-
diff --git a/python/vyos/util.py b/python/vyos/util.py
index 6c20a865a..d27a8a3e7 100644
--- a/python/vyos/util.py
+++ b/python/vyos/util.py
@@ -243,7 +243,7 @@ def chown(path, user, group):
# path may also be an open file descriptor
if not isinstance(path, int) and not os.path.exists(path):
return False
-
+
uid = getpwnam(user).pw_uid
gid = getgrnam(group).gr_gid
os.chown(path, uid, gid)
@@ -651,3 +651,24 @@ def get_bridge_member_config(conf, br, intf):
conf.set_level(old_level)
return memberconf
+
+def check_kmod(k_mod):
+ """ Common utility function to load required kernel modules on demand """
+ if isinstance(k_mod, str):
+ k_mod = k_mod.split()
+ for module in k_mod:
+ if not os.path.exists(f'/sys/module/{module}'):
+ if call(f'modprobe {module}') != 0:
+ raise ConfigError(f'Loading Kernel module {module} failed')
+
+def find_device_file(device):
+ """ Recurively search /dev for the given device file and return its full path.
+ If no device file was found 'None' is returned """
+ from fnmatch import fnmatch
+
+ for root, dirs, files in os.walk('/dev'):
+ for basename in files:
+ if fnmatch(basename, device):
+ return os.path.join(root, basename)
+
+ return None
diff --git a/python/vyos/validate.py b/python/vyos/validate.py
index 9072c5817..ceeb6888a 100644
--- a/python/vyos/validate.py
+++ b/python/vyos/validate.py
@@ -19,6 +19,7 @@ import netifaces
import ipaddress
from vyos.util import cmd
+from vyos import xml
# Important note when you are adding new validation functions:
#
@@ -278,7 +279,6 @@ def is_member(conf, interface, intftype=None):
False -> interface type cannot have members
"""
ret_val = None
-
if intftype not in ['bonding', 'bridge', None]:
raise ValueError((
f'unknown interface type "{intftype}" or it cannot '
@@ -291,14 +291,14 @@ def is_member(conf, interface, intftype=None):
conf.set_level([])
for it in intftype:
- base = 'interfaces ' + it
+ base = ['interfaces', it]
for intf in conf.list_nodes(base):
- memberintf = f'{base} {intf} member interface'
- if conf.is_tag(memberintf):
+ memberintf = base + [intf, 'member', 'interface']
+ if xml.is_tag(memberintf):
if interface in conf.list_nodes(memberintf):
ret_val = intf
break
- elif conf.is_leaf(memberintf):
+ elif xml.is_leaf(memberintf):
if ( conf.exists(memberintf) and
interface in conf.return_values(memberintf) ):
ret_val = intf
diff --git a/python/vyos/xml/__init__.py b/python/vyos/xml/__init__.py
index 6e0e73b1b..0f914fed2 100644
--- a/python/vyos/xml/__init__.py
+++ b/python/vyos/xml/__init__.py
@@ -35,6 +35,18 @@ def load_configuration(cache=[]):
return xml
+# def is_multi(lpath):
+# return load_configuration().is_multi(lpath)
+
+
+def is_tag(lpath):
+ return load_configuration().is_tag(lpath)
+
+
+def is_leaf(lpath, flat=True):
+ return load_configuration().is_leaf(lpath, flat)
+
+
def defaults(lpath, flat=False):
return load_configuration().defaults(lpath, flat)
@@ -42,3 +54,6 @@ def defaults(lpath, flat=False):
if __name__ == '__main__':
print(defaults(['service'], flat=True))
print(defaults(['service'], flat=False))
+
+ print(is_tag(["system", "login", "user", "vyos", "authentication", "public-keys"]))
+ print(is_tag(['protocols', 'static', 'multicast', 'route', '0.0.0.0/0', 'next-hop']))
diff --git a/python/vyos/xml/definition.py b/python/vyos/xml/definition.py
index b0339b228..098e64f7e 100644
--- a/python/vyos/xml/definition.py
+++ b/python/vyos/xml/definition.py
@@ -126,10 +126,12 @@ class XML(dict):
elif word:
if data_node != kw.plainNode or len(passed) == 1:
self.options = [_ for _ in self.tree if _.startswith(word)]
+ self.options.sort()
else:
self.options = []
else:
self.options = named_options
+ self.options.sort()
self.plain = not is_dataNode
@@ -143,6 +145,7 @@ class XML(dict):
self.word = ''
if self.tree.get(kw.node,'') not in (kw.tagNode, kw.leafNode):
self.options = [_ for _ in self.tree if not kw.found(_)]
+ self.options.sort()
def checks(self, cmd):
# as we move thought the named node twice
@@ -300,16 +303,28 @@ class XML(dict):
return tree
def _get(self, lpath, tag, with_tag=True):
- return self._tree(lpath + [tag], with_tag)
+ tree = self._tree(lpath, with_tag)
+ if tree is None:
+ return None
+ return tree.get(tag, None)
def is_multi(self, lpath, with_tag=True):
- return self._get(lpath, kw.multi, with_tag) is True
+ tree = self._get(lpath, kw.multi, with_tag)
+ if tree is None:
+ return None
+ return tree is True
def is_tag(self, lpath, with_tag=True):
- return self._get(lpath, kw.node, with_tag) == kw.tagNode
+ tree = self._get(lpath, kw.node, with_tag)
+ if tree is None:
+ return None
+ return tree == kw.tagNode
def is_leaf(self, lpath, with_tag=True):
- return self._get(lpath, kw.node, with_tag) == kw.leafNode
+ tree = self._get(lpath, kw.node, with_tag)
+ if tree is None:
+ return None
+ return tree == kw.leafNode
def exists(self, lpath, with_tag=True):
return self._get(lpath, kw.node, with_tag) is not None
diff --git a/python/vyos/xml/test_xml.py b/python/vyos/xml/test_xml.py
index ac0620d99..ff55151d2 100644
--- a/python/vyos/xml/test_xml.py
+++ b/python/vyos/xml/test_xml.py
@@ -33,7 +33,7 @@ class TestSearch(TestCase):
last = self.xml.traverse("")
self.assertEqual(last, '')
self.assertEqual(self.xml.inside, [])
- self.assertEqual(self.xml.options, ['protocols', 'service', 'system', 'firewall', 'interfaces', 'vpn', 'nat', 'vrf', 'high-availability'])
+ self.assertEqual(self.xml.options, ['firewall', 'high-availability', 'interfaces', 'nat', 'protocols', 'service', 'system', 'vpn', 'vrf'])
self.assertEqual(self.xml.filling, False)
self.assertEqual(self.xml.word, last)
self.assertEqual(self.xml.check, False)
diff --git a/src/conf_mode/host_name.py b/src/conf_mode/host_name.py
index f2fa64233..9d66bd434 100755
--- a/src/conf_mode/host_name.py
+++ b/src/conf_mode/host_name.py
@@ -18,20 +18,16 @@
conf-mode script for 'system host-name' and 'system domain-name'.
"""
-import os
import re
import sys
import copy
-import glob
-import argparse
-import jinja2
import vyos.util
import vyos.hostsd_client
from vyos.config import Config
from vyos import ConfigError
-from vyos.util import cmd, call, run, process_named_running
+from vyos.util import cmd, call, process_named_running
from vyos import airbag
airbag.enable()
@@ -47,7 +43,9 @@ default_config_data = {
hostsd_tag = 'system'
-def get_config(conf):
+def get_config():
+ conf = Config()
+
hosts = copy.deepcopy(default_config_data)
hosts['hostname'] = conf.return_value("system host-name")
@@ -77,7 +75,7 @@ def get_config(conf):
return hosts
-def verify(conf, hosts):
+def verify(hosts):
if hosts is None:
return None
@@ -168,9 +166,8 @@ def apply(config):
if __name__ == '__main__':
try:
- conf = Config()
- c = get_config(conf)
- verify(conf, c)
+ c = get_config()
+ verify(c)
generate(c)
apply(c)
except ConfigError as e:
diff --git a/src/conf_mode/interfaces-bonding.py b/src/conf_mode/interfaces-bonding.py
index a16c4e105..3b238f1ea 100755
--- a/src/conf_mode/interfaces-bonding.py
+++ b/src/conf_mode/interfaces-bonding.py
@@ -16,41 +16,25 @@
import os
-from copy import deepcopy
from sys import exit
from netifaces import interfaces
-from vyos.ifconfig import BondIf
-from vyos.ifconfig_vlan import apply_all_vlans, verify_vlan_config
-from vyos.configdict import list_diff, intf_to_dict, add_to_dict, interface_default_data
from vyos.config import Config
-from vyos.util import call, cmd
-from vyos.validate import is_member, has_address_configured
+from vyos.configdict import get_interface_dict
+from vyos.configdict import leaf_node_changed
+from vyos.configverify import verify_address
+from vyos.configverify import verify_bridge_delete
+from vyos.configverify import verify_dhcpv6
+from vyos.configverify import verify_source_interface
+from vyos.configverify import verify_vlan_config
+from vyos.configverify import verify_vrf
+from vyos.ifconfig import BondIf
+from vyos.validate import is_member
+from vyos.validate import has_address_configured
from vyos import ConfigError
-
from vyos import airbag
airbag.enable()
-default_config_data = {
- **interface_default_data,
- 'arp_mon_intvl': 0,
- 'arp_mon_tgt': [],
- 'deleted': False,
- 'hash_policy': 'layer2',
- 'intf': '',
- 'ip_arp_cache_tmo': 30,
- 'ip_proxy_arp_pvlan': 0,
- 'mode': '802.3ad',
- 'member': [],
- 'shutdown_required': False,
- 'primary': '',
- 'vif_s': {},
- 'vif_s_remove': [],
- 'vif': {},
- 'vif_remove': [],
-}
-
-
def get_bond_mode(mode):
if mode == 'round-robin':
return 'balance-rr'
@@ -67,339 +51,138 @@ def get_bond_mode(mode):
elif mode == 'adaptive-load-balance':
return 'balance-alb'
else:
- raise ConfigError('invalid bond mode "{}"'.format(mode))
+ raise ConfigError(f'invalid bond mode "{mode}"')
def get_config():
- # determine tagNode instance
- if 'VYOS_TAGNODE_VALUE' not in os.environ:
- raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified')
-
- ifname = os.environ['VYOS_TAGNODE_VALUE']
+ """
+ Retrive CLI config as dictionary. Dictionary can never be empty, as at least the
+ interface name will be added or a deleted flag
+ """
conf = Config()
+ base = ['interfaces', 'bonding']
+ bond = get_interface_dict(conf, base)
+
+ # To make our own life easier transfor the list of member interfaces
+ # into a dictionary - we will use this to add additional information
+ # later on for wach member
+ if 'member' in bond and 'interface' in bond['member']:
+ # first convert it to a list if only one member is given
+ if isinstance(bond['member']['interface'], str):
+ bond['member']['interface'] = [bond['member']['interface']]
+
+ tmp={}
+ for interface in bond['member']['interface']:
+ tmp.update({interface: {}})
+
+ bond['member']['interface'] = tmp
+
+ if 'mode' in bond:
+ bond['mode'] = get_bond_mode(bond['mode'])
+
+ tmp = leaf_node_changed(conf, ['mode'])
+ if tmp:
+ bond.update({'shutdown_required': ''})
+
+ # determine which members have been removed
+ tmp = leaf_node_changed(conf, ['member', 'interface'])
+ if tmp:
+ bond.update({'shutdown_required': ''})
+ if 'member' in bond:
+ bond['member'].update({'interface_remove': tmp })
+ else:
+ bond.update({'member': {'interface_remove': tmp }})
+
+ if 'member' in bond and 'interface' in bond['member']:
+ for interface, interface_config in bond['member']['interface'].items():
+ # Check if we are a member of another bond device
+ tmp = is_member(conf, interface, 'bridge')
+ if tmp:
+ interface_config.update({'is_bridge_member' : tmp})
+
+ # Check if we are a member of a bond device
+ tmp = is_member(conf, interface, 'bonding')
+ if tmp and tmp != bond['ifname']:
+ interface_config.update({'is_bond_member' : tmp})
- # initialize kernel module if not loaded
- if not os.path.isfile('/sys/class/net/bonding_masters'):
- import syslog
- syslog.syslog(syslog.LOG_NOTICE, "loading bonding kernel module")
- if call('modprobe bonding max_bonds=0 miimon=250') != 0:
- syslog.syslog(syslog.LOG_NOTICE, "failed loading bonding kernel module")
- raise ConfigError("failed loading bonding kernel module")
-
- # check if bond has been removed
- cfg_base = 'interfaces bonding ' + ifname
- if not conf.exists(cfg_base):
- bond = deepcopy(default_config_data)
- bond['intf'] = ifname
- bond['deleted'] = True
- return bond
-
- # set new configuration level
- conf.set_level(cfg_base)
-
- bond, disabled = intf_to_dict(conf, default_config_data)
-
- # ARP link monitoring frequency in milliseconds
- if conf.exists('arp-monitor interval'):
- bond['arp_mon_intvl'] = int(conf.return_value('arp-monitor interval'))
-
- # IP address to use for ARP monitoring
- if conf.exists('arp-monitor target'):
- bond['arp_mon_tgt'] = conf.return_values('arp-monitor target')
-
- # Bonding transmit hash policy
- if conf.exists('hash-policy'):
- bond['hash_policy'] = conf.return_value('hash-policy')
-
- # ARP cache entry timeout in seconds
- if conf.exists('ip arp-cache-timeout'):
- bond['ip_arp_cache_tmo'] = int(conf.return_value('ip arp-cache-timeout'))
-
- # Enable private VLAN proxy ARP on this interface
- if conf.exists('ip proxy-arp-pvlan'):
- bond['ip_proxy_arp_pvlan'] = 1
-
- # Bonding mode
- if conf.exists('mode'):
- act_mode = conf.return_value('mode')
- eff_mode = conf.return_effective_value('mode')
- if not (act_mode == eff_mode):
- bond['shutdown_required'] = True
-
- bond['mode'] = get_bond_mode(act_mode)
-
- # determine bond member interfaces (currently configured)
- bond['member'] = conf.return_values('member interface')
-
- # We can not call conf.return_effective_values() as it would not work
- # on reboots. Reboots/First boot will return that running config and
- # saved config is the same, thus on a reboot the bond members will
- # not be added all (https://phabricator.vyos.net/T2030)
- live_members = BondIf(bond['intf']).get_slaves()
- if not (bond['member'] == live_members):
- bond['shutdown_required'] = True
-
- # Primary device interface
- if conf.exists('primary'):
- bond['primary'] = conf.return_value('primary')
-
- add_to_dict(conf, disabled, bond, 'vif', 'vif')
- add_to_dict(conf, disabled, bond, 'vif-s', 'vif_s')
+ # bond members must not have an assigned address
+ tmp = has_address_configured(conf, interface)
+ if tmp:
+ interface_config.update({'has_address' : ''})
return bond
def verify(bond):
- if bond['deleted']:
- if bond['is_bridge_member']:
- raise ConfigError((
- f'Cannot delete interface "{bond["intf"]}" as it is a '
- f'member of bridge "{bond["is_bridge_member"]}"!'))
-
+ if 'deleted' in bond:
+ verify_bridge_delete(bond)
return None
- if len(bond['arp_mon_tgt']) > 16:
- raise ConfigError('The maximum number of arp-monitor targets is 16')
+ if 'arp_monitor' in bond:
+ if 'target' in bond['arp_monitor'] and len(int(bond['arp_monitor']['target'])) > 16:
+ raise ConfigError('The maximum number of arp-monitor targets is 16')
+
+ if 'interval' in bond['arp_monitor'] and len(int(bond['arp_monitor']['interval'])) > 0:
+ if bond['mode'] in ['802.3ad', 'balance-tlb', 'balance-alb']:
+ raise ConfigError('ARP link monitoring does not work for mode 802.3ad, ' \
+ 'transmit-load-balance or adaptive-load-balance')
- if bond['primary']:
+ if 'primary' in bond:
if bond['mode'] not in ['active-backup', 'balance-tlb', 'balance-alb']:
- raise ConfigError((
- 'Mode dependency failed, primary not supported in mode '
- f'"{bond["mode"]}"!'))
-
- if ( bond['is_bridge_member']
- and ( bond['address']
- or bond['ipv6_eui64_prefix']
- or bond['ipv6_autoconf'] ) ):
- raise ConfigError((
- f'Cannot assign address to interface "{bond["intf"]}" '
- f'as it is a member of bridge "{bond["is_bridge_member"]}"!'))
-
- if bond['vrf']:
- if bond['vrf'] not in interfaces():
- raise ConfigError(f'VRF "{bond["vrf"]}" does not exist')
-
- if bond['is_bridge_member']:
- raise ConfigError((
- f'Interface "{bond["intf"]}" cannot be member of VRF '
- f'"{bond["vrf"]}" and bridge {bond["is_bridge_member"]} '
- f'at the same time!'))
+ raise ConfigError('Option primary - mode dependency failed, not'
+ 'supported in mode {mode}!'.format(**bond))
+
+ verify_address(bond)
+ verify_dhcpv6(bond)
+ verify_vrf(bond)
# use common function to verify VLAN configuration
verify_vlan_config(bond)
- conf = Config()
- for intf in bond['member']:
- # check if member interface is "real"
- if intf not in interfaces():
- raise ConfigError(f'Interface {intf} does not exist!')
-
- # a bonding member interface is only allowed to be assigned to one bond!
- all_bonds = conf.list_nodes('interfaces bonding')
- # We do not need to check our own bond
- all_bonds.remove(bond['intf'])
- for tmp in all_bonds:
- if conf.exists('interfaces bonding {tmp} member interface {intf}'):
- raise ConfigError((
- f'Cannot add interface "{intf}" to bond "{bond["intf"]}", '
- f'it is already a member of bond "{tmp}"!'))
-
- # can not add interfaces with an assigned address to a bond
- if has_address_configured(conf, intf):
- raise ConfigError((
- f'Cannot add interface "{intf}" to bond "{bond["intf"]}", '
- f'it has an address assigned!'))
-
- # bond members are not allowed to be bridge members
- tmp = is_member(conf, intf, 'bridge')
- if tmp:
- raise ConfigError((
- f'Cannot add interface "{intf}" to bond "{bond["intf"]}", '
- f'it is already a member of bridge "{tmp}"!'))
-
- # bond members are not allowed to be vrrp members
- for tmp in conf.list_nodes('high-availability vrrp group'):
- if conf.exists('high-availability vrrp group {tmp} interface {intf}'):
- raise ConfigError((
- f'Cannot add interface "{intf}" to bond "{bond["intf"]}", '
- f'it is already a member of VRRP group "{tmp}"!'))
-
- # bond members are not allowed to be underlaying psuedo-ethernet devices
- for tmp in conf.list_nodes('interfaces pseudo-ethernet'):
- if conf.exists('interfaces pseudo-ethernet {tmp} link {intf}'):
- raise ConfigError((
- f'Cannot add interface "{intf}" to bond "{bond["intf"]}", '
- f'it is already the link of pseudo-ethernet "{tmp}"!'))
-
- # bond members are not allowed to be underlaying vxlan devices
- for tmp in conf.list_nodes('interfaces vxlan'):
- if conf.exists('interfaces vxlan {tmp} link {intf}'):
- raise ConfigError((
- f'Cannot add interface "{intf}" to bond "{bond["intf"]}", '
- f'it is already the link of VXLAN "{tmp}"!'))
-
- if bond['primary']:
- if bond['primary'] not in bond['member']:
- raise ConfigError(f'Bond "{bond["intf"]}" primary interface must be a member')
+ bond_name = bond['ifname']
+ if 'member' in bond:
+ member = bond.get('member')
+ for interface, interface_config in member.get('interface', {}).items():
+ error_msg = f'Can not add interface "{interface}" to bond "{bond_name}", '
+
+ if interface == 'lo':
+ raise ConfigError('Loopback interface "lo" can not be added to a bond')
+
+ if interface not in interfaces():
+ raise ConfigError(error_msg + 'it does not exist!')
+
+ if 'is_bridge_member' in interface_config:
+ tmp = interface_config['is_bridge_member']
+ raise ConfigError(error_msg + f'it is already a member of bridge "{tmp}"!')
+
+ if 'is_bond_member' in interface_config:
+ tmp = interface_config['is_bond_member']
+ raise ConfigError(error_msg + f'it is already a member of bond "{tmp}"!')
+
+ if 'has_address' in interface_config:
+ raise ConfigError(error_msg + 'it has an address assigned!')
+
+
+ if 'primary' in bond:
+ if bond['primary'] not in bond['member']['interface']:
+ raise ConfigError(f'Primary interface of bond "{bond_name}" must be a member interface')
if bond['mode'] not in ['active-backup', 'balance-tlb', 'balance-alb']:
raise ConfigError('primary interface only works for mode active-backup, ' \
'transmit-load-balance or adaptive-load-balance')
- if bond['arp_mon_intvl'] > 0:
- if bond['mode'] in ['802.3ad', 'balance-tlb', 'balance-alb']:
- raise ConfigError('ARP link monitoring does not work for mode 802.3ad, ' \
- 'transmit-load-balance or adaptive-load-balance')
-
return None
def generate(bond):
return None
def apply(bond):
- b = BondIf(bond['intf'])
+ b = BondIf(bond['ifname'])
- if bond['deleted']:
+ if 'deleted' in bond:
# delete interface
b.remove()
else:
- # ARP link monitoring frequency, reset miimon when arp-montior is inactive
- # this is done inside BondIf automatically
- b.set_arp_interval(bond['arp_mon_intvl'])
-
- # ARP monitor targets need to be synchronized between sysfs and CLI.
- # Unfortunately an address can't be send twice to sysfs as this will
- # result in the following exception: OSError: [Errno 22] Invalid argument.
- #
- # We remove ALL adresses prior adding new ones, this will remove addresses
- # added manually by the user too - but as we are limited to 16 adresses
- # from the kernel side this looks valid to me. We won't run into an error
- # when a user added manual adresses which would result in having more
- # then 16 adresses in total.
- arp_tgt_addr = list(map(str, b.get_arp_ip_target().split()))
- for addr in arp_tgt_addr:
- b.set_arp_ip_target('-' + addr)
-
- # Add configured ARP target addresses
- for addr in bond['arp_mon_tgt']:
- b.set_arp_ip_target('+' + addr)
-
- # update interface description used e.g. within SNMP
- b.set_alias(bond['description'])
-
- if bond['dhcp_client_id']:
- b.dhcp.v4.options['client_id'] = bond['dhcp_client_id']
-
- if bond['dhcp_hostname']:
- b.dhcp.v4.options['hostname'] = bond['dhcp_hostname']
-
- if bond['dhcp_vendor_class_id']:
- b.dhcp.v4.options['vendor_class_id'] = bond['dhcp_vendor_class_id']
-
- if bond['dhcpv6_prm_only']:
- b.dhcp.v6.options['dhcpv6_prm_only'] = True
-
- if bond['dhcpv6_temporary']:
- b.dhcp.v6.options['dhcpv6_temporary'] = True
-
- if bond['dhcpv6_pd_length']:
- b.dhcp.v6.options['dhcpv6_pd_length'] = bond['dhcpv6_pd_length']
-
- if bond['dhcpv6_pd_interfaces']:
- b.dhcp.v6.options['dhcpv6_pd_interfaces'] = bond['dhcpv6_pd_interfaces']
-
- # ignore link state changes
- b.set_link_detect(bond['disable_link_detect'])
- # Bonding transmit hash policy
- b.set_hash_policy(bond['hash_policy'])
- # configure ARP cache timeout in milliseconds
- b.set_arp_cache_tmo(bond['ip_arp_cache_tmo'])
- # configure ARP filter configuration
- b.set_arp_filter(bond['ip_disable_arp_filter'])
- # configure ARP accept
- b.set_arp_accept(bond['ip_enable_arp_accept'])
- # configure ARP announce
- b.set_arp_announce(bond['ip_enable_arp_announce'])
- # configure ARP ignore
- b.set_arp_ignore(bond['ip_enable_arp_ignore'])
- # Enable proxy-arp on this interface
- b.set_proxy_arp(bond['ip_proxy_arp'])
- # Enable private VLAN proxy ARP on this interface
- b.set_proxy_arp_pvlan(bond['ip_proxy_arp_pvlan'])
- # IPv6 accept RA
- b.set_ipv6_accept_ra(bond['ipv6_accept_ra'])
- # IPv6 address autoconfiguration
- b.set_ipv6_autoconf(bond['ipv6_autoconf'])
- # IPv6 forwarding
- b.set_ipv6_forwarding(bond['ipv6_forwarding'])
- # IPv6 Duplicate Address Detection (DAD) tries
- b.set_ipv6_dad_messages(bond['ipv6_dup_addr_detect'])
-
- # Delete old IPv6 EUI64 addresses before changing MAC
- for addr in bond['ipv6_eui64_prefix_remove']:
- b.del_ipv6_eui64_address(addr)
-
- # Change interface MAC address
- if bond['mac']:
- b.set_mac(bond['mac'])
-
- # Add IPv6 EUI-based addresses
- for addr in bond['ipv6_eui64_prefix']:
- b.add_ipv6_eui64_address(addr)
-
- # Maximum Transmission Unit (MTU)
- b.set_mtu(bond['mtu'])
-
- # Primary device interface
- if bond['primary']:
- b.set_primary(bond['primary'])
-
- # Some parameters can not be changed when the bond is up.
- if bond['shutdown_required']:
- # Disable bond prior changing of certain properties
- b.set_admin_state('down')
-
- # The bonding mode can not be changed when there are interfaces enslaved
- # to this bond, thus we will free all interfaces from the bond first!
- for intf in b.get_slaves():
- b.del_port(intf)
-
- # Bonding policy/mode
- b.set_mode(bond['mode'])
-
- # Add (enslave) interfaces to bond
- for intf in bond['member']:
- # if we've come here we already verified the interface doesn't
- # have addresses configured so just flush any remaining ones
- cmd(f'ip addr flush dev "{intf}"')
- b.add_port(intf)
-
- # As the bond interface is always disabled first when changing
- # parameters we will only re-enable the interface if it is not
- # administratively disabled
- if not bond['disable']:
- b.set_admin_state('up')
- else:
- b.set_admin_state('down')
-
- # Configure interface address(es)
- # - not longer required addresses get removed first
- # - newly addresses will be added second
- for addr in bond['address_remove']:
- b.del_addr(addr)
- for addr in bond['address']:
- b.add_addr(addr)
-
- # assign/remove VRF (ONLY when not a member of a bridge,
- # otherwise 'nomaster' removes it from it)
- if not bond['is_bridge_member']:
- b.set_vrf(bond['vrf'])
-
- # re-add ourselves to any bridge we might have fallen out of
- if bond['is_bridge_member']:
- b.add_to_bridge(bond['is_bridge_member'])
-
- # apply all vlans to interface
- apply_all_vlans(b, bond)
+ b.update(bond)
return None
diff --git a/src/conf_mode/interfaces-bridge.py b/src/conf_mode/interfaces-bridge.py
index 1e4fa5816..ee8e85e73 100755
--- a/src/conf_mode/interfaces-bridge.py
+++ b/src/conf_mode/interfaces-bridge.py
@@ -16,251 +16,102 @@
import os
-from copy import deepcopy
from sys import exit
from netifaces import interfaces
-from vyos.ifconfig import BridgeIf, Section
-from vyos.ifconfig.stp import STP
-from vyos.configdict import list_diff, interface_default_data
-from vyos.validate import is_member, has_address_configured
from vyos.config import Config
-from vyos.util import cmd, get_bridge_member_config
+from vyos.configdict import get_interface_dict
+from vyos.configdict import node_changed
+from vyos.configverify import verify_dhcpv6
+from vyos.configverify import verify_vrf
+from vyos.ifconfig import BridgeIf
+from vyos.validate import is_member, has_address_configured
+from vyos.xml import defaults
+
+from vyos.util import cmd
from vyos import ConfigError
from vyos import airbag
airbag.enable()
-default_config_data = {
- **interface_default_data,
- 'aging': 300,
- 'arp_cache_tmo': 30,
- 'deleted': False,
- 'forwarding_delay': 14,
- 'hello_time': 2,
- 'igmp_querier': 0,
- 'intf': '',
- 'max_age': 20,
- 'member': [],
- 'member_remove': [],
- 'priority': 32768,
- 'stp': 0
-}
-
def get_config():
- bridge = deepcopy(default_config_data)
+ """
+ Retrive CLI config as dictionary. Dictionary can never be empty, as at least the
+ interface name will be added or a deleted flag
+ """
conf = Config()
-
- # determine tagNode instance
- if 'VYOS_TAGNODE_VALUE' not in os.environ:
- raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified')
-
- bridge['intf'] = os.environ['VYOS_TAGNODE_VALUE']
-
- # Check if bridge has been removed
- if not conf.exists('interfaces bridge ' + bridge['intf']):
- bridge['deleted'] = True
- return bridge
-
- # set new configuration level
- conf.set_level('interfaces bridge ' + bridge['intf'])
-
- # retrieve configured interface addresses
- if conf.exists('address'):
- bridge['address'] = conf.return_values('address')
-
- # Determine interface addresses (currently effective) - to determine which
- # address is no longer valid and needs to be removed
- eff_addr = conf.return_effective_values('address')
- bridge['address_remove'] = list_diff(eff_addr, bridge['address'])
-
- # retrieve aging - how long addresses are retained
- if conf.exists('aging'):
- bridge['aging'] = int(conf.return_value('aging'))
-
- # retrieve interface description
- if conf.exists('description'):
- bridge['description'] = conf.return_value('description')
-
- # get DHCP client identifier
- if conf.exists('dhcp-options client-id'):
- bridge['dhcp_client_id'] = conf.return_value('dhcp-options client-id')
-
- # DHCP client host name (overrides the system host name)
- if conf.exists('dhcp-options host-name'):
- bridge['dhcp_hostname'] = conf.return_value('dhcp-options host-name')
-
- # DHCP client vendor identifier
- if conf.exists('dhcp-options vendor-class-id'):
- bridge['dhcp_vendor_class_id'] = conf.return_value('dhcp-options vendor-class-id')
-
- # DHCPv6 only acquire config parameters, no address
- if conf.exists('dhcpv6-options parameters-only'):
- bridge['dhcpv6_prm_only'] = True
-
- # DHCPv6 temporary IPv6 address
- if conf.exists('dhcpv6-options temporary'):
- bridge['dhcpv6_temporary'] = True
-
- # Disable this bridge interface
- if conf.exists('disable'):
- bridge['disable'] = True
-
- # Ignore link state changes
- if conf.exists('disable-link-detect'):
- bridge['disable_link_detect'] = 2
-
- # Forwarding delay
- if conf.exists('forwarding-delay'):
- bridge['forwarding_delay'] = int(conf.return_value('forwarding-delay'))
-
- # Hello packet advertisment interval
- if conf.exists('hello-time'):
- bridge['hello_time'] = int(conf.return_value('hello-time'))
-
- # Enable Internet Group Management Protocol (IGMP) querier
- if conf.exists('igmp querier'):
- bridge['igmp_querier'] = 1
-
- # ARP cache entry timeout in seconds
- if conf.exists('ip arp-cache-timeout'):
- bridge['arp_cache_tmo'] = int(conf.return_value('ip arp-cache-timeout'))
-
- # ARP filter configuration
- if conf.exists('ip disable-arp-filter'):
- bridge['ip_disable_arp_filter'] = 0
-
- # ARP enable accept
- if conf.exists('ip enable-arp-accept'):
- bridge['ip_enable_arp_accept'] = 1
-
- # ARP enable announce
- if conf.exists('ip enable-arp-announce'):
- bridge['ip_enable_arp_announce'] = 1
-
- # ARP enable ignore
- if conf.exists('ip enable-arp-ignore'):
- bridge['ip_enable_arp_ignore'] = 1
-
- # Enable acquisition of IPv6 address using stateless autoconfig (SLAAC)
- if conf.exists('ipv6 address autoconf'):
- bridge['ipv6_autoconf'] = 1
-
- # Get prefixes for IPv6 addressing based on MAC address (EUI-64)
- if conf.exists('ipv6 address eui64'):
- bridge['ipv6_eui64_prefix'] = conf.return_values('ipv6 address eui64')
-
- # Determine currently effective EUI64 addresses - to determine which
- # address is no longer valid and needs to be removed
- eff_addr = conf.return_effective_values('ipv6 address eui64')
- bridge['ipv6_eui64_prefix_remove'] = list_diff(eff_addr, bridge['ipv6_eui64_prefix'])
-
- # Remove the default link-local address if set.
- if conf.exists('ipv6 address no-default-link-local'):
- bridge['ipv6_eui64_prefix_remove'].append('fe80::/64')
- else:
- # add the link-local by default to make IPv6 work
- bridge['ipv6_eui64_prefix'].append('fe80::/64')
-
- # Disable IPv6 forwarding on this interface
- if conf.exists('ipv6 disable-forwarding'):
- bridge['ipv6_forwarding'] = 0
-
- # IPv6 Duplicate Address Detection (DAD) tries
- if conf.exists('ipv6 dup-addr-detect-transmits'):
- bridge['ipv6_dup_addr_detect'] = int(conf.return_value('ipv6 dup-addr-detect-transmits'))
-
- # Media Access Control (MAC) address
- if conf.exists('mac'):
- bridge['mac'] = conf.return_value('mac')
-
- # Find out if MAC has changed - if so, we need to delete all IPv6 EUI64 addresses
- # before re-adding them
- if ( bridge['mac'] and bridge['intf'] in Section.interfaces(section='bridge')
- and bridge['mac'] != BridgeIf(bridge['intf'], create=False).get_mac() ):
- bridge['ipv6_eui64_prefix_remove'] += bridge['ipv6_eui64_prefix']
-
- # to make IPv6 SLAAC and DHCPv6 work with forwarding=1,
- # accept_ra must be 2
- if bridge['ipv6_autoconf'] or 'dhcpv6' in bridge['address']:
- bridge['ipv6_accept_ra'] = 2
-
- # Interval at which neighbor bridges are removed
- if conf.exists('max-age'):
- bridge['max_age'] = int(conf.return_value('max-age'))
-
- # Determine bridge member interface (currently configured)
- for intf in conf.list_nodes('member interface'):
- # defaults are stored in util.py (they can't be here as all interface
- # scripts use the function)
- memberconf = get_bridge_member_config(conf, bridge['intf'], intf)
- if memberconf:
- memberconf['name'] = intf
- bridge['member'].append(memberconf)
-
- # Determine bridge member interface (currently effective) - to determine which
- # interfaces is no longer assigend to the bridge and thus can be removed
- eff_intf = conf.list_effective_nodes('member interface')
- act_intf = conf.list_nodes('member interface')
- bridge['member_remove'] = list_diff(eff_intf, act_intf)
-
- # Priority for this bridge
- if conf.exists('priority'):
- bridge['priority'] = int(conf.return_value('priority'))
-
- # Enable spanning tree protocol
- if conf.exists('stp'):
- bridge['stp'] = 1
-
- # retrieve VRF instance
- if conf.exists('vrf'):
- bridge['vrf'] = conf.return_value('vrf')
+ base = ['interfaces', 'bridge']
+ bridge = get_interface_dict(conf, base)
+
+ # determine which members have been removed
+ tmp = node_changed(conf, ['member', 'interface'])
+ if tmp:
+ if 'member' in bridge:
+ bridge['member'].update({'interface_remove': tmp })
+ else:
+ bridge.update({'member': {'interface_remove': tmp }})
+
+ if 'member' in bridge and 'interface' in bridge['member']:
+ # XXX TT2665 we need a copy of the dict keys for iteration, else we will get:
+ # RuntimeError: dictionary changed size during iteration
+ for interface in list(bridge['member']['interface']):
+ for key in ['cost', 'priority']:
+ if interface == key:
+ del bridge['member']['interface'][key]
+ continue
+
+ # the default dictionary is not properly paged into the dict (see T2665)
+ # thus we will ammend it ourself
+ default_member_values = defaults(base + ['member', 'interface'])
+ for interface, interface_config in bridge['member']['interface'].items():
+ interface_config.update(default_member_values)
+
+ # Check if we are a member of another bridge device
+ tmp = is_member(conf, interface, 'bridge')
+ if tmp and tmp != bridge['ifname']:
+ interface_config.update({'is_bridge_member' : tmp})
+
+ # Check if we are a member of a bond device
+ tmp = is_member(conf, interface, 'bonding')
+ if tmp:
+ interface_config.update({'is_bond_member' : tmp})
+
+ # Bridge members must not have an assigned address
+ tmp = has_address_configured(conf, interface)
+ if tmp:
+ interface_config.update({'has_address' : ''})
return bridge
def verify(bridge):
- if bridge['dhcpv6_prm_only'] and bridge['dhcpv6_temporary']:
- raise ConfigError('DHCPv6 temporary and parameters-only options are mutually exclusive!')
+ if 'deleted' in bridge:
+ return None
- vrf_name = bridge['vrf']
- if vrf_name and vrf_name not in interfaces():
- raise ConfigError(f'VRF "{vrf_name}" does not exist')
+ verify_dhcpv6(bridge)
+ verify_vrf(bridge)
- conf = Config()
- for intf in bridge['member']:
- # the interface must exist prior adding it to a bridge
- if intf['name'] not in interfaces():
- raise ConfigError((
- f'Cannot add nonexistent interface "{intf["name"]}" '
- f'to bridge "{bridge["intf"]}"'))
+ if 'member' in bridge:
+ member = bridge.get('member')
+ bridge_name = bridge['ifname']
+ for interface, interface_config in member.get('interface', {}).items():
+ error_msg = f'Can not add interface "{interface}" to bridge "{bridge_name}", '
- if intf['name'] == 'lo':
- raise ConfigError('Loopback interface "lo" can not be added to a bridge')
+ if interface == 'lo':
+ raise ConfigError('Loopback interface "lo" can not be added to a bridge')
- # bridge members aren't allowed to be members of another bridge
- for br in conf.list_nodes('interfaces bridge'):
- # it makes no sense to verify ourself in this case
- if br == bridge['intf']:
- continue
+ if interface not in interfaces():
+ raise ConfigError(error_msg + 'it does not exist!')
- tmp = conf.list_nodes(f'interfaces bridge {br} member interface')
- if intf['name'] in tmp:
- raise ConfigError((
- f'Cannot add interface "{intf["name"]}" to bridge '
- f'"{bridge["intf"]}", it is already a member of bridge "{br}"!'))
+ if 'is_bridge_member' in interface_config:
+ tmp = interface_config['is_bridge_member']
+ raise ConfigError(error_msg + f'it is already a member of bridge "{tmp}"!')
- # bridge members are not allowed to be bond members
- tmp = is_member(conf, intf['name'], 'bonding')
- if tmp:
- raise ConfigError((
- f'Cannot add interface "{intf["name"]}" to bridge '
- f'"{bridge["intf"]}", it is already a member of bond "{tmp}"!'))
+ if 'is_bond_member' in interface_config:
+ tmp = interface_config['is_bond_member']
+ raise ConfigError(error_msg + f'it is already a member of bond "{tmp}"!')
- # bridge members must not have an assigned address
- if has_address_configured(conf, intf['name']):
- raise ConfigError((
- f'Cannot add interface "{intf["name"]}" to bridge '
- f'"{bridge["intf"]}", it has an address assigned!'))
+ if 'has_address' in interface_config:
+ raise ConfigError(error_msg + 'it has an address assigned!')
return None
@@ -268,120 +119,12 @@ def generate(bridge):
return None
def apply(bridge):
- br = BridgeIf(bridge['intf'])
-
- if bridge['deleted']:
+ br = BridgeIf(bridge['ifname'])
+ if 'deleted' in bridge:
# delete interface
br.remove()
else:
- # enable interface
- br.set_admin_state('up')
- # set ageing time
- br.set_ageing_time(bridge['aging'])
- # set bridge forward delay
- br.set_forward_delay(bridge['forwarding_delay'])
- # set hello time
- br.set_hello_time(bridge['hello_time'])
- # configure ARP filter configuration
- br.set_arp_filter(bridge['ip_disable_arp_filter'])
- # configure ARP accept
- br.set_arp_accept(bridge['ip_enable_arp_accept'])
- # configure ARP announce
- br.set_arp_announce(bridge['ip_enable_arp_announce'])
- # configure ARP ignore
- br.set_arp_ignore(bridge['ip_enable_arp_ignore'])
- # IPv6 accept RA
- br.set_ipv6_accept_ra(bridge['ipv6_accept_ra'])
- # IPv6 address autoconfiguration
- br.set_ipv6_autoconf(bridge['ipv6_autoconf'])
- # IPv6 forwarding
- br.set_ipv6_forwarding(bridge['ipv6_forwarding'])
- # IPv6 Duplicate Address Detection (DAD) tries
- br.set_ipv6_dad_messages(bridge['ipv6_dup_addr_detect'])
- # set max message age
- br.set_max_age(bridge['max_age'])
- # set bridge priority
- br.set_priority(bridge['priority'])
- # turn stp on/off
- br.set_stp(bridge['stp'])
- # enable or disable IGMP querier
- br.set_multicast_querier(bridge['igmp_querier'])
- # update interface description used e.g. within SNMP
- br.set_alias(bridge['description'])
-
- if bridge['dhcp_client_id']:
- br.dhcp.v4.options['client_id'] = bridge['dhcp_client_id']
-
- if bridge['dhcp_hostname']:
- br.dhcp.v4.options['hostname'] = bridge['dhcp_hostname']
-
- if bridge['dhcp_vendor_class_id']:
- br.dhcp.v4.options['vendor_class_id'] = bridge['dhcp_vendor_class_id']
-
- if bridge['dhcpv6_prm_only']:
- br.dhcp.v6.options['dhcpv6_prm_only'] = True
-
- if bridge['dhcpv6_temporary']:
- br.dhcp.v6.options['dhcpv6_temporary'] = True
-
- if bridge['dhcpv6_pd_length']:
- br.dhcp.v6.options['dhcpv6_pd_length'] = br['dhcpv6_pd_length']
-
- if bridge['dhcpv6_pd_interfaces']:
- br.dhcp.v6.options['dhcpv6_pd_interfaces'] = br['dhcpv6_pd_interfaces']
-
- # assign/remove VRF
- br.set_vrf(bridge['vrf'])
-
- # Delete old IPv6 EUI64 addresses before changing MAC
- # (adding members to a fresh bridge changes its MAC too)
- for addr in bridge['ipv6_eui64_prefix_remove']:
- br.del_ipv6_eui64_address(addr)
-
- # remove interface from bridge
- for intf in bridge['member_remove']:
- br.del_port(intf)
-
- # add interfaces to bridge
- for member in bridge['member']:
- # if we've come here we already verified the interface doesn't
- # have addresses configured so just flush any remaining ones
- cmd(f'ip addr flush dev "{member["name"]}"')
- br.add_port(member['name'])
-
- # Change interface MAC address
- if bridge['mac']:
- br.set_mac(bridge['mac'])
-
- # Add IPv6 EUI-based addresses (must be done after adding the
- # 1st bridge member or setting its MAC)
- for addr in bridge['ipv6_eui64_prefix']:
- br.add_ipv6_eui64_address(addr)
-
- # up/down interface
- if bridge['disable']:
- br.set_admin_state('down')
-
- # Configure interface address(es)
- # - not longer required addresses get removed first
- # - newly addresses will be added second
- for addr in bridge['address_remove']:
- br.del_addr(addr)
- for addr in bridge['address']:
- br.add_addr(addr)
-
- STPBridgeIf = STP.enable(BridgeIf)
- # configure additional bridge member options
- for member in bridge['member']:
- i = STPBridgeIf(member['name'])
- # configure ARP cache timeout
- i.set_arp_cache_tmo(member['arp_cache_tmo'])
- # ignore link state changes
- i.set_link_detect(member['disable_link_detect'])
- # set bridge port path cost
- i.set_path_cost(member['cost'])
- # set bridge port path priority
- i.set_path_priority(member['priority'])
+ br.update(bridge)
return None
diff --git a/src/conf_mode/interfaces-dummy.py b/src/conf_mode/interfaces-dummy.py
index 2d62420a6..8df86c8ea 100755
--- a/src/conf_mode/interfaces-dummy.py
+++ b/src/conf_mode/interfaces-dummy.py
@@ -19,41 +19,23 @@ import os
from sys import exit
from vyos.config import Config
+from vyos.configdict import get_interface_dict
from vyos.configverify import verify_vrf
from vyos.configverify import verify_address
from vyos.configverify import verify_bridge_delete
from vyos.ifconfig import DummyIf
-from vyos.validate import is_member
from vyos import ConfigError
from vyos import airbag
airbag.enable()
def get_config():
- """ Retrive CLI config as dictionary. Dictionary can never be empty,
- as at least the interface name will be added or a deleted flag """
+ """
+ Retrive CLI config as dictionary. Dictionary can never be empty, as at least the
+ interface name will be added or a deleted flag
+ """
conf = Config()
-
- # determine tagNode instance
- if 'VYOS_TAGNODE_VALUE' not in os.environ:
- raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified')
-
- ifname = os.environ['VYOS_TAGNODE_VALUE']
- base = ['interfaces', 'dummy', ifname]
-
- dummy = conf.get_config_dict(base, key_mangling=('-', '_'), get_first_key=True)
- # Check if interface has been removed
- if dummy == {}:
- dummy.update({'deleted' : ''})
-
- # store interface instance name in dictionary
- dummy.update({'ifname': ifname})
-
- # check if we are a member of any bridge
- bridge = is_member(conf, ifname, 'bridge')
- if bridge:
- tmp = {'is_bridge_member' : bridge}
- dummy.update(tmp)
-
+ base = ['interfaces', 'dummy']
+ dummy = get_interface_dict(conf, base)
return dummy
def verify(dummy):
diff --git a/src/conf_mode/interfaces-ethernet.py b/src/conf_mode/interfaces-ethernet.py
index 8b895c4d2..10758e35a 100755
--- a/src/conf_mode/interfaces-ethernet.py
+++ b/src/conf_mode/interfaces-ethernet.py
@@ -17,295 +17,65 @@
import os
from sys import exit
-from copy import deepcopy
-from netifaces import interfaces
-from vyos.ifconfig import EthernetIf
-from vyos.ifconfig_vlan import apply_all_vlans, verify_vlan_config
-from vyos.configdict import list_diff, intf_to_dict, add_to_dict, interface_default_data
-from vyos.validate import is_member
from vyos.config import Config
+from vyos.configdict import get_interface_dict
+from vyos.configverify import verify_interface_exists
+from vyos.configverify import verify_dhcpv6
+from vyos.configverify import verify_address
+from vyos.configverify import verify_vrf
+from vyos.configverify import verify_vlan_config
+from vyos.ifconfig import EthernetIf
from vyos import ConfigError
-
from vyos import airbag
airbag.enable()
-default_config_data = {
- **interface_default_data,
- 'deleted': False,
- 'duplex': 'auto',
- 'flow_control': 'on',
- 'hw_id': '',
- 'ip_arp_cache_tmo': 30,
- 'ip_proxy_arp_pvlan': 0,
- 'is_bond_member': False,
- 'intf': '',
- 'offload_gro': 'off',
- 'offload_gso': 'off',
- 'offload_sg': 'off',
- 'offload_tso': 'off',
- 'offload_ufo': 'off',
- 'speed': 'auto',
- 'vif_s': {},
- 'vif_s_remove': [],
- 'vif': {},
- 'vif_remove': [],
- 'vrf': ''
-}
-
-
def get_config():
- # determine tagNode instance
- if 'VYOS_TAGNODE_VALUE' not in os.environ:
- raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified')
-
- ifname = os.environ['VYOS_TAGNODE_VALUE']
+ """
+ Retrive CLI config as dictionary. Dictionary can never be empty, as at least the
+ interface name will be added or a deleted flag
+ """
conf = Config()
+ base = ['interfaces', 'ethernet']
+ ethernet = get_interface_dict(conf, base)
+ return ethernet
- # check if ethernet interface has been removed
- cfg_base = ['interfaces', 'ethernet', ifname]
- if not conf.exists(cfg_base):
- eth = deepcopy(default_config_data)
- eth['intf'] = ifname
- eth['deleted'] = True
- # we can not bail out early as ethernet interface can not be removed
- # Kernel will complain with: RTNETLINK answers: Operation not supported.
- # Thus we need to remove individual settings
- return eth
-
- # set new configuration level
- conf.set_level(cfg_base)
-
- eth, disabled = intf_to_dict(conf, default_config_data)
-
- # disable ethernet flow control (pause frames)
- if conf.exists('disable-flow-control'):
- eth['flow_control'] = 'off'
-
- # retrieve real hardware address
- if conf.exists('hw-id'):
- eth['hw_id'] = conf.return_value('hw-id')
-
- # interface duplex
- if conf.exists('duplex'):
- eth['duplex'] = conf.return_value('duplex')
-
- # ARP cache entry timeout in seconds
- if conf.exists('ip arp-cache-timeout'):
- eth['ip_arp_cache_tmo'] = int(conf.return_value('ip arp-cache-timeout'))
-
- # Enable private VLAN proxy ARP on this interface
- if conf.exists('ip proxy-arp-pvlan'):
- eth['ip_proxy_arp_pvlan'] = 1
-
- # check if we are a member of any bond
- eth['is_bond_member'] = is_member(conf, eth['intf'], 'bonding')
-
- # GRO (generic receive offload)
- if conf.exists('offload-options generic-receive'):
- eth['offload_gro'] = conf.return_value('offload-options generic-receive')
-
- # GSO (generic segmentation offload)
- if conf.exists('offload-options generic-segmentation'):
- eth['offload_gso'] = conf.return_value('offload-options generic-segmentation')
-
- # scatter-gather option
- if conf.exists('offload-options scatter-gather'):
- eth['offload_sg'] = conf.return_value('offload-options scatter-gather')
-
- # TSO (TCP segmentation offloading)
- if conf.exists('offload-options tcp-segmentation'):
- eth['offload_tso'] = conf.return_value('offload-options tcp-segmentation')
-
- # UDP fragmentation offloading
- if conf.exists('offload-options udp-fragmentation'):
- eth['offload_ufo'] = conf.return_value('offload-options udp-fragmentation')
-
- # interface speed
- if conf.exists('speed'):
- eth['speed'] = conf.return_value('speed')
-
- # remove default IPv6 link-local address if member of a bond
- if eth['is_bond_member'] and 'fe80::/64' in eth['ipv6_eui64_prefix']:
- eth['ipv6_eui64_prefix'].remove('fe80::/64')
- eth['ipv6_eui64_prefix_remove'].append('fe80::/64')
-
- add_to_dict(conf, disabled, eth, 'vif', 'vif')
- add_to_dict(conf, disabled, eth, 'vif-s', 'vif_s')
-
- return eth
-
-
-def verify(eth):
- if eth['deleted']:
+def verify(ethernet):
+ if 'deleted' in ethernet:
return None
- if eth['intf'] not in interfaces():
- raise ConfigError(f"Interface ethernet {eth['intf']} does not exist")
+ verify_interface_exists(ethernet)
- if eth['speed'] == 'auto':
- if eth['duplex'] != 'auto':
+ if ethernet.get('speed', None) == 'auto':
+ if ethernet.get('duplex', None) != 'auto':
raise ConfigError('If speed is hardcoded, duplex must be hardcoded, too')
- if eth['duplex'] == 'auto':
- if eth['speed'] != 'auto':
+ if ethernet.get('duplex', None) == 'auto':
+ if ethernet.get('speed', None) != 'auto':
raise ConfigError('If duplex is hardcoded, speed must be hardcoded, too')
- if eth['dhcpv6_prm_only'] and eth['dhcpv6_temporary']:
- raise ConfigError('DHCPv6 temporary and parameters-only options are mutually exclusive!')
-
- memberof = eth['is_bridge_member'] if eth['is_bridge_member'] else eth['is_bond_member']
-
- if ( memberof
- and ( eth['address']
- or eth['ipv6_eui64_prefix']
- or eth['ipv6_autoconf'] ) ):
- raise ConfigError((
- f'Cannot assign address to interface "{eth["intf"]}" '
- f'as it is a member of "{memberof}"!'))
+ verify_dhcpv6(ethernet)
+ verify_address(ethernet)
+ verify_vrf(ethernet)
- if eth['vrf']:
- if eth['vrf'] not in interfaces():
- raise ConfigError(f'VRF "{eth["vrf"]}" does not exist')
-
- if memberof:
- raise ConfigError((
- f'Interface "{eth["intf"]}" cannot be member of VRF "{eth["vrf"]}" '
- f'and "{memberof}" at the same time!'))
-
- if eth['mac'] and eth['is_bond_member']:
- print('WARNING: "mac {0}" command will be ignored because {1} is a part of {2}'\
- .format(eth['mac'], eth['intf'], eth['is_bond_member']))
+ if {'is_bond_member', 'mac'} <= set(ethernet):
+ print(f'WARNING: changing mac address "{mac}" will be ignored as "{ifname}" '
+ f'is a member of bond "{is_bond_member}"'.format(**ethernet))
# use common function to verify VLAN configuration
- verify_vlan_config(eth)
+ verify_vlan_config(ethernet)
return None
-def generate(eth):
+def generate(ethernet):
return None
-def apply(eth):
- e = EthernetIf(eth['intf'])
- if eth['deleted']:
- # apply all vlans to interface (they need removing too)
- apply_all_vlans(e, eth)
-
+def apply(ethernet):
+ e = EthernetIf(ethernet['ifname'])
+ if 'deleted' in ethernet:
# delete interface
e.remove()
else:
- # update interface description used e.g. within SNMP
- e.set_alias(eth['description'])
-
- if eth['dhcp_client_id']:
- e.dhcp.v4.options['client_id'] = eth['dhcp_client_id']
-
- if eth['dhcp_hostname']:
- e.dhcp.v4.options['hostname'] = eth['dhcp_hostname']
-
- if eth['dhcp_vendor_class_id']:
- e.dhcp.v4.options['vendor_class_id'] = eth['dhcp_vendor_class_id']
-
- if eth['dhcpv6_prm_only']:
- e.dhcp.v6.options['dhcpv6_prm_only'] = True
-
- if eth['dhcpv6_temporary']:
- e.dhcp.v6.options['dhcpv6_temporary'] = True
-
- if eth['dhcpv6_pd_length']:
- e.dhcp.v6.options['dhcpv6_pd_length'] = eth['dhcpv6_pd_length']
-
- if eth['dhcpv6_pd_interfaces']:
- e.dhcp.v6.options['dhcpv6_pd_interfaces'] = eth['dhcpv6_pd_interfaces']
-
- # ignore link state changes
- e.set_link_detect(eth['disable_link_detect'])
- # disable ethernet flow control (pause frames)
- e.set_flow_control(eth['flow_control'])
- # configure ARP cache timeout in milliseconds
- e.set_arp_cache_tmo(eth['ip_arp_cache_tmo'])
- # configure ARP filter configuration
- e.set_arp_filter(eth['ip_disable_arp_filter'])
- # configure ARP accept
- e.set_arp_accept(eth['ip_enable_arp_accept'])
- # configure ARP announce
- e.set_arp_announce(eth['ip_enable_arp_announce'])
- # configure ARP ignore
- e.set_arp_ignore(eth['ip_enable_arp_ignore'])
- # Enable proxy-arp on this interface
- e.set_proxy_arp(eth['ip_proxy_arp'])
- # Enable private VLAN proxy ARP on this interface
- e.set_proxy_arp_pvlan(eth['ip_proxy_arp_pvlan'])
- # IPv6 accept RA
- e.set_ipv6_accept_ra(eth['ipv6_accept_ra'])
- # IPv6 address autoconfiguration
- e.set_ipv6_autoconf(eth['ipv6_autoconf'])
- # IPv6 forwarding
- e.set_ipv6_forwarding(eth['ipv6_forwarding'])
- # IPv6 Duplicate Address Detection (DAD) tries
- e.set_ipv6_dad_messages(eth['ipv6_dup_addr_detect'])
-
- # Delete old IPv6 EUI64 addresses before changing MAC
- for addr in eth['ipv6_eui64_prefix_remove']:
- e.del_ipv6_eui64_address(addr)
-
- # Change interface MAC address - re-set to real hardware address (hw-id)
- # if custom mac is removed. Skip if bond member.
- if not eth['is_bond_member']:
- if eth['mac']:
- e.set_mac(eth['mac'])
- elif eth['hw_id']:
- e.set_mac(eth['hw_id'])
-
- # Add IPv6 EUI-based addresses
- for addr in eth['ipv6_eui64_prefix']:
- e.add_ipv6_eui64_address(addr)
-
- # Maximum Transmission Unit (MTU)
- e.set_mtu(eth['mtu'])
-
- # GRO (generic receive offload)
- e.set_gro(eth['offload_gro'])
-
- # GSO (generic segmentation offload)
- e.set_gso(eth['offload_gso'])
-
- # scatter-gather option
- e.set_sg(eth['offload_sg'])
-
- # TSO (TCP segmentation offloading)
- e.set_tso(eth['offload_tso'])
-
- # UDP fragmentation offloading
- e.set_ufo(eth['offload_ufo'])
-
- # Set physical interface speed and duplex
- e.set_speed_duplex(eth['speed'], eth['duplex'])
-
- # Enable/Disable interface
- if eth['disable']:
- e.set_admin_state('down')
- else:
- e.set_admin_state('up')
-
- # Configure interface address(es)
- # - not longer required addresses get removed first
- # - newly addresses will be added second
- for addr in eth['address_remove']:
- e.del_addr(addr)
- for addr in eth['address']:
- e.add_addr(addr)
-
- # assign/remove VRF (ONLY when not a member of a bridge or bond,
- # otherwise 'nomaster' removes it from it)
- if not ( eth['is_bridge_member'] or eth['is_bond_member'] ):
- e.set_vrf(eth['vrf'])
-
- # re-add ourselves to any bridge we might have fallen out of
- if eth['is_bridge_member']:
- e.add_to_bridge(eth['is_bridge_member'])
-
- # apply all vlans to interface
- apply_all_vlans(e, eth)
+ e.update(ethernet)
if __name__ == '__main__':
diff --git a/src/conf_mode/interfaces-geneve.py b/src/conf_mode/interfaces-geneve.py
index 31f6eb6b5..1104bd3c0 100755
--- a/src/conf_mode/interfaces-geneve.py
+++ b/src/conf_mode/interfaces-geneve.py
@@ -1,6 +1,6 @@
#!/usr/bin/env python3
#
-# Copyright (C) 2019 VyOS maintainers and contributors
+# Copyright (C) 2019-2020 VyOS maintainers and contributors
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License version 2 or later as
@@ -21,102 +21,37 @@ from copy import deepcopy
from netifaces import interfaces
from vyos.config import Config
+from vyos.configdict import get_interface_dict
+from vyos.configverify import verify_address
+from vyos.configverify import verify_bridge_delete
from vyos.ifconfig import GeneveIf
-from vyos.validate import is_member
from vyos import ConfigError
from vyos import airbag
airbag.enable()
-default_config_data = {
- 'address': [],
- 'deleted': False,
- 'description': '',
- 'disable': False,
- 'intf': '',
- 'ip_arp_cache_tmo': 30,
- 'ip_proxy_arp': 0,
- 'is_bridge_member': False,
- 'mtu': 1500,
- 'remote': '',
- 'vni': ''
-}
-
def get_config():
- geneve = deepcopy(default_config_data)
+ """
+ Retrive CLI config as dictionary. Dictionary can never be empty, as at least the
+ interface name will be added or a deleted flag
+ """
conf = Config()
-
- # determine tagNode instance
- if 'VYOS_TAGNODE_VALUE' not in os.environ:
- raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified')
-
- geneve['intf'] = os.environ['VYOS_TAGNODE_VALUE']
-
- # check if interface is member if a bridge
- geneve['is_bridge_member'] = is_member(conf, geneve['intf'], 'bridge')
-
- # Check if interface has been removed
- if not conf.exists('interfaces geneve ' + geneve['intf']):
- geneve['deleted'] = True
- return geneve
-
- # set new configuration level
- conf.set_level('interfaces geneve ' + geneve['intf'])
-
- # retrieve configured interface addresses
- if conf.exists('address'):
- geneve['address'] = conf.return_values('address')
-
- # retrieve interface description
- if conf.exists('description'):
- geneve['description'] = conf.return_value('description')
-
- # Disable this interface
- if conf.exists('disable'):
- geneve['disable'] = True
-
- # ARP cache entry timeout in seconds
- if conf.exists('ip arp-cache-timeout'):
- geneve['ip_arp_cache_tmo'] = int(conf.return_value('ip arp-cache-timeout'))
-
- # Enable proxy-arp on this interface
- if conf.exists('ip enable-proxy-arp'):
- geneve['ip_proxy_arp'] = 1
-
- # Maximum Transmission Unit (MTU)
- if conf.exists('mtu'):
- geneve['mtu'] = int(conf.return_value('mtu'))
-
- # Remote address of GENEVE tunnel
- if conf.exists('remote'):
- geneve['remote'] = conf.return_value('remote')
-
- # Virtual Network Identifier
- if conf.exists('vni'):
- geneve['vni'] = conf.return_value('vni')
-
+ base = ['interfaces', 'geneve']
+ geneve = get_interface_dict(conf, base)
return geneve
-
def verify(geneve):
- if geneve['deleted']:
- if geneve['is_bridge_member']:
- raise ConfigError((
- f'Cannot delete interface "{geneve["intf"]}" as it is a '
- f'member of bridge "{geneve["is_bridge_member"]}"!'))
-
+ if 'deleted' in geneve:
+ verify_bridge_delete(geneve)
return None
- if geneve['is_bridge_member'] and geneve['address']:
- raise ConfigError((
- f'Cannot assign address to interface "{geneve["intf"]}" '
- f'as it is a member of bridge "{geneve["is_bridge_member"]}"!'))
+ verify_address(geneve)
- if not geneve['remote']:
- raise ConfigError('GENEVE remote must be configured')
+ if 'remote' not in geneve:
+ raise ConfigError('Remote side must be configured')
- if not geneve['vni']:
- raise ConfigError('GENEVE VNI must be configured')
+ if 'vni' not in geneve:
+ raise ConfigError('VNI must be configured')
return None
@@ -127,13 +62,13 @@ def generate(geneve):
def apply(geneve):
# Check if GENEVE interface already exists
- if geneve['intf'] in interfaces():
- g = GeneveIf(geneve['intf'])
+ if geneve['ifname'] in interfaces():
+ g = GeneveIf(geneve['ifname'])
# GENEVE is super picky and the tunnel always needs to be recreated,
# thus we can simply always delete it first.
g.remove()
- if not geneve['deleted']:
+ if 'deleted' not in geneve:
# GENEVE interface needs to be created on-block
# instead of passing a ton of arguments, I just use a dict
# that is managed by vyos.ifconfig
@@ -144,32 +79,8 @@ def apply(geneve):
conf['remote'] = geneve['remote']
# Finally create the new interface
- g = GeneveIf(geneve['intf'], **conf)
- # update interface description used e.g. by SNMP
- g.set_alias(geneve['description'])
- # Maximum Transfer Unit (MTU)
- g.set_mtu(geneve['mtu'])
-
- # configure ARP cache timeout in milliseconds
- g.set_arp_cache_tmo(geneve['ip_arp_cache_tmo'])
- # Enable proxy-arp on this interface
- g.set_proxy_arp(geneve['ip_proxy_arp'])
-
- # Configure interface address(es) - no need to implicitly delete the
- # old addresses as they have already been removed by deleting the
- # interface above
- for addr in geneve['address']:
- g.add_addr(addr)
-
- # As the GENEVE interface is always disabled first when changing
- # parameters we will only re-enable the interface if it is not
- # administratively disabled
- if not geneve['disable']:
- g.set_admin_state('up')
-
- # re-add ourselves to any bridge we might have fallen out of
- if geneve['is_bridge_member']:
- g.add_to_bridge(geneve['is_bridge_member'])
+ g = GeneveIf(geneve['ifname'], **conf)
+ g.update(geneve)
return None
diff --git a/src/conf_mode/interfaces-l2tpv3.py b/src/conf_mode/interfaces-l2tpv3.py
index 4ff0bcb57..0978df5b6 100755
--- a/src/conf_mode/interfaces-l2tpv3.py
+++ b/src/conf_mode/interfaces-l2tpv3.py
@@ -21,200 +21,65 @@ from copy import deepcopy
from netifaces import interfaces
from vyos.config import Config
-from vyos.ifconfig import L2TPv3If, Interface
+from vyos.configdict import get_interface_dict
+from vyos.configdict import leaf_node_changed
+from vyos.configverify import verify_address
+from vyos.configverify import verify_bridge_delete
+from vyos.ifconfig import L2TPv3If
+from vyos.util import check_kmod
+from vyos.validate import is_addr_assigned
from vyos import ConfigError
-from vyos.util import call
-from vyos.validate import is_member, is_addr_assigned
-
from vyos import airbag
airbag.enable()
-default_config_data = {
- 'address': [],
- 'deleted': False,
- 'description': '',
- 'disable': False,
- 'encapsulation': 'udp',
- 'local_address': '',
- 'local_port': 5000,
- 'intf': '',
- 'ipv6_accept_ra': 1,
- 'ipv6_autoconf': 0,
- 'ipv6_eui64_prefix': [],
- 'ipv6_forwarding': 1,
- 'ipv6_dup_addr_detect': 1,
- 'is_bridge_member': False,
- 'mtu': 1488,
- 'peer_session_id': '',
- 'peer_tunnel_id': '',
- 'remote_address': '',
- 'remote_port': 5000,
- 'session_id': '',
- 'tunnel_id': ''
-}
+k_mod = ['l2tp_eth', 'l2tp_netlink', 'l2tp_ip', 'l2tp_ip6']
-def check_kmod():
- modules = ['l2tp_eth', 'l2tp_netlink', 'l2tp_ip', 'l2tp_ip6']
- for module in modules:
- if not os.path.exists(f'/sys/module/{module}'):
- if call(f'modprobe {module}') != 0:
- raise ConfigError(f'Loading Kernel module {module} failed')
def get_config():
- l2tpv3 = deepcopy(default_config_data)
+ """
+ Retrive CLI config as dictionary. Dictionary can never be empty, as at least the
+ interface name will be added or a deleted flag
+ """
conf = Config()
+ base = ['interfaces', 'l2tpv3']
+ l2tpv3 = get_interface_dict(conf, base)
- # determine tagNode instance
- if 'VYOS_TAGNODE_VALUE' not in os.environ:
- raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified')
-
- l2tpv3['intf'] = os.environ['VYOS_TAGNODE_VALUE']
-
- # check if interface is member of a bridge
- l2tpv3['is_bridge_member'] = is_member(conf, l2tpv3['intf'], 'bridge')
-
- # Check if interface has been removed
- if not conf.exists('interfaces l2tpv3 ' + l2tpv3['intf']):
- l2tpv3['deleted'] = True
- interface = l2tpv3['intf']
-
- # to delete the l2tpv3 interface we need the current tunnel_id and session_id
- if conf.exists_effective(f'interfaces l2tpv3 {interface} tunnel-id'):
- l2tpv3['tunnel_id'] = conf.return_effective_value(f'interfaces l2tpv3 {interface} tunnel-id')
-
- if conf.exists_effective(f'interfaces l2tpv3 {interface} session-id'):
- l2tpv3['session_id'] = conf.return_effective_value(f'interfaces l2tpv3 {interface} session-id')
-
- return l2tpv3
-
- # set new configuration level
- conf.set_level('interfaces l2tpv3 ' + l2tpv3['intf'])
-
- # retrieve configured interface addresses
- if conf.exists('address'):
- l2tpv3['address'] = conf.return_values('address')
-
- # retrieve interface description
- if conf.exists('description'):
- l2tpv3['description'] = conf.return_value('description')
-
- # get tunnel destination port
- if conf.exists('destination-port'):
- l2tpv3['remote_port'] = int(conf.return_value('destination-port'))
-
- # Disable this interface
- if conf.exists('disable'):
- l2tpv3['disable'] = True
-
- # get tunnel encapsulation type
- if conf.exists('encapsulation'):
- l2tpv3['encapsulation'] = conf.return_value('encapsulation')
-
- # get tunnel local ip address
- if conf.exists('local-ip'):
- l2tpv3['local_address'] = conf.return_value('local-ip')
-
- # Enable acquisition of IPv6 address using stateless autoconfig (SLAAC)
- if conf.exists('ipv6 address autoconf'):
- l2tpv3['ipv6_autoconf'] = 1
-
- # Get prefixes for IPv6 addressing based on MAC address (EUI-64)
- if conf.exists('ipv6 address eui64'):
- l2tpv3['ipv6_eui64_prefix'] = conf.return_values('ipv6 address eui64')
-
- # Remove the default link-local address if set.
- if not ( conf.exists('ipv6 address no-default-link-local') or
- l2tpv3['is_bridge_member'] ):
- # add the link-local by default to make IPv6 work
- l2tpv3['ipv6_eui64_prefix'].append('fe80::/64')
-
- # Disable IPv6 forwarding on this interface
- if conf.exists('ipv6 disable-forwarding'):
- l2tpv3['ipv6_forwarding'] = 0
-
- # IPv6 Duplicate Address Detection (DAD) tries
- if conf.exists('ipv6 dup-addr-detect-transmits'):
- l2tpv3['ipv6_dup_addr_detect'] = int(conf.return_value('ipv6 dup-addr-detect-transmits'))
+ # L2TPv3 is "special" the default MTU is 1488 - update accordingly
+ # as the config_level is already st in get_interface_dict() - we can use []
+ tmp = conf.get_config_dict([], key_mangling=('-', '_'), get_first_key=True)
+ if 'mtu' not in tmp:
+ l2tpv3['mtu'] = '1488'
- # to make IPv6 SLAAC and DHCPv6 work with forwarding=1,
- # accept_ra must be 2
- if l2tpv3['ipv6_autoconf'] or 'dhcpv6' in l2tpv3['address']:
- l2tpv3['ipv6_accept_ra'] = 2
+ # To delete an l2tpv3 interface we need the current tunnel and session-id
+ if 'deleted' in l2tpv3:
+ tmp = leaf_node_changed(conf, ['tunnel-id'])
+ l2tpv3.update({'tunnel_id': tmp})
- # Maximum Transmission Unit (MTU)
- if conf.exists('mtu'):
- l2tpv3['mtu'] = int(conf.return_value('mtu'))
-
- # Remote session id
- if conf.exists('peer-session-id'):
- l2tpv3['peer_session_id'] = conf.return_value('peer-session-id')
-
- # Remote tunnel id
- if conf.exists('peer-tunnel-id'):
- l2tpv3['peer_tunnel_id'] = conf.return_value('peer-tunnel-id')
-
- # Remote address of L2TPv3 tunnel
- if conf.exists('remote-ip'):
- l2tpv3['remote_address'] = conf.return_value('remote-ip')
-
- # Local session id
- if conf.exists('session-id'):
- l2tpv3['session_id'] = conf.return_value('session-id')
-
- # get local tunnel port
- if conf.exists('source-port'):
- l2tpv3['local_port'] = conf.return_value('source-port')
-
- # get local tunnel id
- if conf.exists('tunnel-id'):
- l2tpv3['tunnel_id'] = conf.return_value('tunnel-id')
+ tmp = leaf_node_changed(conf, ['session-id'])
+ l2tpv3.update({'session_id': tmp})
return l2tpv3
-
def verify(l2tpv3):
- interface = l2tpv3['intf']
-
- if l2tpv3['deleted']:
- if l2tpv3['is_bridge_member']:
- raise ConfigError((
- f'Interface "{l2tpv3["intf"]}" cannot be deleted as it is a '
- f'member of bridge "{l2tpv3["is_bridge_member"]}"!'))
-
+ if 'deleted' in l2tpv3:
+ verify_bridge_delete(l2tpv3)
return None
- if not l2tpv3['local_address']:
- raise ConfigError(f'Must configure the l2tpv3 local-ip for {interface}')
-
- if not is_addr_assigned(l2tpv3['local_address']):
- raise ConfigError(f'Must use a configured IP on l2tpv3 local-ip for {interface}')
+ interface = l2tpv3['ifname']
- if not l2tpv3['remote_address']:
- raise ConfigError(f'Must configure the l2tpv3 remote-ip for {interface}')
+ for key in ['local_ip', 'remote_ip', 'tunnel_id', 'peer_tunnel_id',
+ 'session_id', 'peer_session_id']:
+ if key not in l2tpv3:
+ tmp = key.replace('_', '-')
+ raise ConfigError(f'L2TPv3 {tmp} must be configured!')
- if not l2tpv3['tunnel_id']:
- raise ConfigError(f'Must configure the l2tpv3 tunnel-id for {interface}')
-
- if not l2tpv3['peer_tunnel_id']:
- raise ConfigError(f'Must configure the l2tpv3 peer-tunnel-id for {interface}')
-
- if not l2tpv3['session_id']:
- raise ConfigError(f'Must configure the l2tpv3 session-id for {interface}')
-
- if not l2tpv3['peer_session_id']:
- raise ConfigError(f'Must configure the l2tpv3 peer-session-id for {interface}')
-
- if ( l2tpv3['is_bridge_member']
- and ( l2tpv3['address']
- or l2tpv3['ipv6_eui64_prefix']
- or l2tpv3['ipv6_autoconf'] ) ):
- raise ConfigError((
- f'Cannot assign address to interface "{l2tpv3["intf"]}" '
- f'as it is a member of bridge "{l2tpv3["is_bridge_member"]}"!'))
+ if not is_addr_assigned(l2tpv3['local_ip']):
+ raise ConfigError('L2TPv3 local-ip address '
+ '"{local_ip}" is not configured!'.format(**l2tpv3))
+ verify_address(l2tpv3)
return None
-
def generate(l2tpv3):
return None
@@ -225,65 +90,34 @@ def apply(l2tpv3):
conf = deepcopy(L2TPv3If.get_config())
# Check if L2TPv3 interface already exists
- if l2tpv3['intf'] in interfaces():
+ if l2tpv3['ifname'] in interfaces():
# L2TPv3 is picky when changing tunnels/sessions, thus we can simply
# always delete it first.
conf['session_id'] = l2tpv3['session_id']
conf['tunnel_id'] = l2tpv3['tunnel_id']
- l = L2TPv3If(l2tpv3['intf'], **conf)
+ l = L2TPv3If(l2tpv3['ifname'], **conf)
l.remove()
- if not l2tpv3['deleted']:
+ if 'deleted' not in l2tpv3:
conf['peer_tunnel_id'] = l2tpv3['peer_tunnel_id']
- conf['local_port'] = l2tpv3['local_port']
- conf['remote_port'] = l2tpv3['remote_port']
+ conf['local_port'] = l2tpv3['source_port']
+ conf['remote_port'] = l2tpv3['destination_port']
conf['encapsulation'] = l2tpv3['encapsulation']
- conf['local_address'] = l2tpv3['local_address']
- conf['remote_address'] = l2tpv3['remote_address']
+ conf['local_address'] = l2tpv3['local_ip']
+ conf['remote_address'] = l2tpv3['remote_ip']
conf['session_id'] = l2tpv3['session_id']
conf['tunnel_id'] = l2tpv3['tunnel_id']
conf['peer_session_id'] = l2tpv3['peer_session_id']
# Finally create the new interface
- l = L2TPv3If(l2tpv3['intf'], **conf)
- # update interface description used e.g. by SNMP
- l.set_alias(l2tpv3['description'])
- # Maximum Transfer Unit (MTU)
- l.set_mtu(l2tpv3['mtu'])
- # IPv6 accept RA
- l.set_ipv6_accept_ra(l2tpv3['ipv6_accept_ra'])
- # IPv6 address autoconfiguration
- l.set_ipv6_autoconf(l2tpv3['ipv6_autoconf'])
- # IPv6 forwarding
- l.set_ipv6_forwarding(l2tpv3['ipv6_forwarding'])
- # IPv6 Duplicate Address Detection (DAD) tries
- l.set_ipv6_dad_messages(l2tpv3['ipv6_dup_addr_detect'])
-
- # Configure interface address(es) - no need to implicitly delete the
- # old addresses as they have already been removed by deleting the
- # interface above
- for addr in l2tpv3['address']:
- l.add_addr(addr)
-
- # IPv6 EUI-based addresses
- for addr in l2tpv3['ipv6_eui64_prefix']:
- l.add_ipv6_eui64_address(addr)
-
- # As the interface is always disabled first when changing parameters
- # we will only re-enable the interface if it is not administratively
- # disabled
- if not l2tpv3['disable']:
- l.set_admin_state('up')
-
- # re-add ourselves to any bridge we might have fallen out of
- if l2tpv3['is_bridge_member']:
- l.add_to_bridge(l2tpv3['is_bridge_member'])
+ l = L2TPv3If(l2tpv3['ifname'], **conf)
+ l.update(l2tpv3)
return None
if __name__ == '__main__':
try:
- check_kmod()
+ check_kmod(k_mod)
c = get_config()
verify(c)
generate(c)
diff --git a/src/conf_mode/interfaces-loopback.py b/src/conf_mode/interfaces-loopback.py
index 2368f88a9..0398cd591 100755
--- a/src/conf_mode/interfaces-loopback.py
+++ b/src/conf_mode/interfaces-loopback.py
@@ -18,31 +18,21 @@ import os
from sys import exit
-from vyos.ifconfig import LoopbackIf
from vyos.config import Config
-from vyos import ConfigError, airbag
+from vyos.configdict import get_interface_dict
+from vyos.ifconfig import LoopbackIf
+from vyos import ConfigError
+from vyos import airbag
airbag.enable()
def get_config():
- """ Retrive CLI config as dictionary. Dictionary can never be empty,
- as at least the interface name will be added or a deleted flag """
+ """
+ Retrive CLI config as dictionary. Dictionary can never be empty, as at least the
+ interface name will be added or a deleted flag
+ """
conf = Config()
-
- # determine tagNode instance
- if 'VYOS_TAGNODE_VALUE' not in os.environ:
- raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified')
-
- ifname = os.environ['VYOS_TAGNODE_VALUE']
- base = ['interfaces', 'loopback', ifname]
-
- loopback = conf.get_config_dict(base, key_mangling=('-', '_'), get_first_key=True)
- # Check if interface has been removed
- if loopback == {}:
- loopback.update({'deleted' : ''})
-
- # store interface instance name in dictionary
- loopback.update({'ifname': ifname})
-
+ base = ['interfaces', 'loopback']
+ loopback = get_interface_dict(conf, base)
return loopback
def verify(loopback):
diff --git a/src/conf_mode/interfaces-macsec.py b/src/conf_mode/interfaces-macsec.py
index 56273f71a..ca15212d4 100755
--- a/src/conf_mode/interfaces-macsec.py
+++ b/src/conf_mode/interfaces-macsec.py
@@ -20,16 +20,14 @@ from copy import deepcopy
from sys import exit
from vyos.config import Config
-from vyos.configdict import dict_merge
+from vyos.configdict import get_interface_dict
from vyos.ifconfig import MACsecIf
from vyos.template import render
from vyos.util import call
-from vyos.validate import is_member
from vyos.configverify import verify_vrf
from vyos.configverify import verify_address
from vyos.configverify import verify_bridge_delete
from vyos.configverify import verify_source_interface
-from vyos.xml import defaults
from vyos import ConfigError
from vyos import airbag
airbag.enable()
@@ -38,50 +36,25 @@ airbag.enable()
wpa_suppl_conf = '/run/wpa_supplicant/{source_interface}.conf'
def get_config():
- """ Retrive CLI config as dictionary. Dictionary can never be empty,
- as at least the interface name will be added or a deleted flag """
+ """
+ Retrive CLI config as dictionary. Dictionary can never be empty, as at least the
+ interface name will be added or a deleted flag
+ """
conf = Config()
-
- # determine tagNode instance
- if 'VYOS_TAGNODE_VALUE' not in os.environ:
- raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified')
-
- # retrieve interface default values
base = ['interfaces', 'macsec']
- default_values = defaults(base)
+ macsec = get_interface_dict(conf, base)
- ifname = os.environ['VYOS_TAGNODE_VALUE']
- base = base + [ifname]
-
- macsec = conf.get_config_dict(base, key_mangling=('-', '_'), get_first_key=True)
# Check if interface has been removed
- if macsec == {}:
- tmp = {
- 'deleted' : '',
- 'source_interface' : conf.return_effective_value(
+ if 'deleted' in macsec:
+ source_interface = conf.return_effective_value(
base + ['source-interface'])
- }
- macsec.update(tmp)
-
- # We have gathered the dict representation of the CLI, but there are
- # default options which we need to update into the dictionary
- # retrived.
- macsec = dict_merge(default_values, macsec)
-
- # Add interface instance name into dictionary
- macsec.update({'ifname': ifname})
-
- # Check if we are a member of any bridge
- bridge = is_member(conf, ifname, 'bridge')
- if bridge:
- tmp = {'is_bridge_member' : bridge}
- macsec.update(tmp)
+ macsec.update({'source_interface': source_interface})
return macsec
def verify(macsec):
- if 'deleted' in macsec.keys():
+ if 'deleted' in macsec:
verify_bridge_delete(macsec)
return None
@@ -89,18 +62,18 @@ def verify(macsec):
verify_vrf(macsec)
verify_address(macsec)
- if not (('security' in macsec.keys()) and
- ('cipher' in macsec['security'].keys())):
+ if not (('security' in macsec) and
+ ('cipher' in macsec['security'])):
raise ConfigError(
'Cipher suite must be set for MACsec "{ifname}"'.format(**macsec))
- if (('security' in macsec.keys()) and
- ('encrypt' in macsec['security'].keys())):
+ if (('security' in macsec) and
+ ('encrypt' in macsec['security'])):
tmp = macsec.get('security')
- if not (('mka' in tmp.keys()) and
- ('cak' in tmp['mka'].keys()) and
- ('ckn' in tmp['mka'].keys())):
+ if not (('mka' in tmp) and
+ ('cak' in tmp['mka']) and
+ ('ckn' in tmp['mka'])):
raise ConfigError('Missing mandatory MACsec security '
'keys as encryption is enabled!')
diff --git a/src/conf_mode/interfaces-pppoe.py b/src/conf_mode/interfaces-pppoe.py
index 3ee57e83c..928113b49 100755
--- a/src/conf_mode/interfaces-pppoe.py
+++ b/src/conf_mode/interfaces-pppoe.py
@@ -22,51 +22,34 @@ from copy import deepcopy
from netifaces import interfaces
from vyos.config import Config
-from vyos.configdict import dict_merge
+from vyos.configdict import get_interface_dict
from vyos.configverify import verify_source_interface
from vyos.configverify import verify_vrf
from vyos.template import render
from vyos.util import call
-from vyos.xml import defaults
from vyos import ConfigError
from vyos import airbag
airbag.enable()
def get_config():
- """ Retrive CLI config as dictionary. Dictionary can never be empty,
- as at least the interface name will be added or a deleted flag """
+ """
+ Retrive CLI config as dictionary. Dictionary can never be empty, as at least the
+ interface name will be added or a deleted flag
+ """
conf = Config()
-
- # determine tagNode instance
- if 'VYOS_TAGNODE_VALUE' not in os.environ:
- raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified')
-
- # retrieve interface default values
base = ['interfaces', 'pppoe']
- default_values = defaults(base)
- # PPPoE is "special" the default MTU is 1492 - update accordingly
- default_values['mtu'] = '1492'
-
- ifname = os.environ['VYOS_TAGNODE_VALUE']
- base = base + [ifname]
+ pppoe = get_interface_dict(conf, base)
- pppoe = conf.get_config_dict(base, key_mangling=('-', '_'), get_first_key=True)
- # Check if interface has been removed
- if pppoe == {}:
- pppoe.update({'deleted' : ''})
-
- # We have gathered the dict representation of the CLI, but there are
- # default options which we need to update into the dictionary
- # retrived.
- pppoe = dict_merge(default_values, pppoe)
-
- # Add interface instance name into dictionary
- pppoe.update({'ifname': ifname})
+ # PPPoE is "special" the default MTU is 1492 - update accordingly
+ # as the config_level is already st in get_interface_dict() - we can use []
+ tmp = conf.get_config_dict([], key_mangling=('-', '_'), get_first_key=True)
+ if 'mtu' not in tmp:
+ pppoe['mtu'] = '1492'
return pppoe
def verify(pppoe):
- if 'deleted' in pppoe.keys():
+ if 'deleted' in pppoe:
# bail out early
return None
@@ -92,7 +75,7 @@ def generate(pppoe):
config_files = [config_pppoe, script_pppoe_pre_up, script_pppoe_ip_up,
script_pppoe_ip_down, script_pppoe_ipv6_up, config_wide_dhcp6c]
- if 'deleted' in pppoe.keys():
+ if 'deleted' in pppoe:
# stop DHCPv6-PD client
call(f'systemctl stop dhcp6c@{ifname}.service')
# Hang-up PPPoE connection
@@ -125,16 +108,16 @@ def generate(pppoe):
if tmp and len(tmp) > 0:
# ipv6.tmpl relies on ifname - this should be made consitent in the
# future better then double key-ing the same value
- render(config_wide_dhcp6c, 'dhcp-client/ipv6_new.tmpl', pppoe, trim_blocks=True)
+ render(config_wide_dhcp6c, 'dhcp-client/ipv6.tmpl', pppoe, trim_blocks=True)
return None
def apply(pppoe):
- if 'deleted' in pppoe.keys():
+ if 'deleted' in pppoe:
# bail out early
return None
- if 'disable' not in pppoe.keys():
+ if 'disable' not in pppoe:
# Dial PPPoE connection
call('systemctl restart ppp@{ifname}.service'.format(**pppoe))
diff --git a/src/conf_mode/interfaces-pseudo-ethernet.py b/src/conf_mode/interfaces-pseudo-ethernet.py
index fb8237bee..fe2d7b1be 100755
--- a/src/conf_mode/interfaces-pseudo-ethernet.py
+++ b/src/conf_mode/interfaces-pseudo-ethernet.py
@@ -18,115 +18,66 @@ import os
from copy import deepcopy
from sys import exit
-from netifaces import interfaces
from vyos.config import Config
-from vyos.configdict import list_diff, intf_to_dict, add_to_dict, interface_default_data
-from vyos.ifconfig import MACVLANIf, Section
-from vyos.ifconfig_vlan import apply_all_vlans, verify_vlan_config
+from vyos.configdict import get_interface_dict
+from vyos.configdict import leaf_node_changed
+from vyos.configverify import verify_vrf
+from vyos.configverify import verify_address
+from vyos.configverify import verify_bridge_delete
+from vyos.configverify import verify_source_interface
+from vyos.configverify import verify_vlan_config
+from vyos.ifconfig import MACVLANIf
+from vyos.validate import is_member
from vyos import ConfigError
from vyos import airbag
airbag.enable()
-default_config_data = {
- **interface_default_data,
- 'deleted': False,
- 'intf': '',
- 'ip_arp_cache_tmo': 30,
- 'ip_proxy_arp_pvlan': 0,
- 'source_interface': '',
- 'recreating_required': False,
- 'mode': 'private',
- 'vif_s': {},
- 'vif_s_remove': [],
- 'vif': {},
- 'vif_remove': [],
- 'vrf': ''
-}
-
def get_config():
- peth = deepcopy(default_config_data)
+ """
+ Retrive CLI config as dictionary. Dictionary can never be empty, as at
+ least the interface name will be added or a deleted flag
+ """
conf = Config()
+ base = ['interfaces', 'pseudo-ethernet']
+ peth = get_interface_dict(conf, base)
- # determine tagNode instance
- if 'VYOS_TAGNODE_VALUE' not in os.environ:
- raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified')
-
- peth['intf'] = os.environ['VYOS_TAGNODE_VALUE']
-
- # Check if interface has been removed
- cfg_base = ['interfaces', 'pseudo-ethernet', peth['intf']]
- if not conf.exists(cfg_base):
- peth['deleted'] = True
- return peth
-
- # set new configuration level
- conf.set_level(cfg_base)
-
- peth, disabled = intf_to_dict(conf, default_config_data)
-
- # ARP cache entry timeout in seconds
- if conf.exists(['ip', 'arp-cache-timeout']):
- peth['ip_arp_cache_tmo'] = int(conf.return_value(['ip', 'arp-cache-timeout']))
-
- # Enable private VLAN proxy ARP on this interface
- if conf.exists(['ip', 'proxy-arp-pvlan']):
- peth['ip_proxy_arp_pvlan'] = 1
-
- # Physical interface
- if conf.exists(['source-interface']):
- peth['source_interface'] = conf.return_value(['source-interface'])
- tmp = conf.return_effective_value(['source-interface'])
- if tmp != peth['source_interface']:
- peth['recreating_required'] = True
+ mode = leaf_node_changed(conf, ['mode'])
+ if mode:
+ peth.update({'mode_old' : mode})
- # MACvlan mode
- if conf.exists(['mode']):
- peth['mode'] = conf.return_value(['mode'])
- tmp = conf.return_effective_value(['mode'])
- if tmp != peth['mode']:
- peth['recreating_required'] = True
+ # Check if source-interface is member of a bridge device
+ if 'source_interface' in peth:
+ bridge = is_member(conf, peth['source_interface'], 'bridge')
+ if bridge:
+ peth.update({'source_interface_is_bridge_member' : bridge})
- add_to_dict(conf, disabled, peth, 'vif', 'vif')
- add_to_dict(conf, disabled, peth, 'vif-s', 'vif_s')
+ # Check if we are a member of a bond device
+ bond = is_member(conf, peth['source_interface'], 'bonding')
+ if bond:
+ peth.update({'source_interface_is_bond_member' : bond})
return peth
def verify(peth):
- if peth['deleted']:
- if peth['is_bridge_member']:
- raise ConfigError((
- f'Cannot delete interface "{peth["intf"]}" as it is a '
- f'member of bridge "{peth["is_bridge_member"]}"!'))
-
+ if 'deleted' in peth:
+ verify_bridge_delete(peth)
return None
- if not peth['source_interface']:
- raise ConfigError((
- f'Link device must be set for pseudo-ethernet "{peth["intf"]}"'))
-
- if not peth['source_interface'] in interfaces():
- raise ConfigError((
- f'Pseudo-ethernet "{peth["intf"]}" link device does not exist'))
+ verify_source_interface(peth)
+ verify_vrf(peth)
+ verify_address(peth)
- if ( peth['is_bridge_member']
- and ( peth['address']
- or peth['ipv6_eui64_prefix']
- or peth['ipv6_autoconf'] ) ):
- raise ConfigError((
- f'Cannot assign address to interface "{peth["intf"]}" '
- f'as it is a member of bridge "{peth["is_bridge_member"]}"!'))
+ if 'source_interface_is_bridge_member' in peth:
+ raise ConfigError(
+ 'Source interface "{source_interface}" can not be used as it is already a '
+ 'member of bridge "{source_interface_is_bridge_member}"!'.format(**peth))
- if peth['vrf']:
- if peth['vrf'] not in interfaces():
- raise ConfigError(f'VRF "{peth["vrf"]}" does not exist')
-
- if peth['is_bridge_member']:
- raise ConfigError((
- f'Interface "{peth["intf"]}" cannot be member of VRF '
- f'"{peth["vrf"]}" and bridge {peth["is_bridge_member"]} '
- f'at the same time!'))
+ if 'source_interface_is_bond_member' in peth:
+ raise ConfigError(
+ 'Source interface "{source_interface}" can not be used as it is already a '
+ 'member of bond "{source_interface_is_bond_member}"!'.format(**peth))
# use common function to verify VLAN configuration
verify_vlan_config(peth)
@@ -136,17 +87,16 @@ def generate(peth):
return None
def apply(peth):
- if peth['deleted']:
+ if 'deleted' in peth:
# delete interface
- MACVLANIf(peth['intf']).remove()
+ MACVLANIf(peth['ifname']).remove()
return None
# Check if MACVLAN interface already exists. Parameters like the underlaying
- # source-interface device or mode can not be changed on the fly and the interface
- # needs to be recreated from the bottom.
- if peth['intf'] in interfaces():
- if peth['recreating_required']:
- MACVLANIf(peth['intf']).remove()
+ # source-interface device or mode can not be changed on the fly and the
+ # interface needs to be recreated from the bottom.
+ if 'mode_old' in peth:
+ MACVLANIf(peth['ifname']).remove()
# MACVLAN interface needs to be created on-block instead of passing a ton
# of arguments, I just use a dict that is managed by vyos.ifconfig
@@ -158,98 +108,8 @@ def apply(peth):
# It is safe to "re-create" the interface always, there is a sanity check
# that the interface will only be create if its non existent
- p = MACVLANIf(peth['intf'], **conf)
-
- # update interface description used e.g. within SNMP
- p.set_alias(peth['description'])
-
- if peth['dhcp_client_id']:
- p.dhcp.v4.options['client_id'] = peth['dhcp_client_id']
-
- if peth['dhcp_hostname']:
- p.dhcp.v4.options['hostname'] = peth['dhcp_hostname']
-
- if peth['dhcp_vendor_class_id']:
- p.dhcp.v4.options['vendor_class_id'] = peth['dhcp_vendor_class_id']
-
- if peth['dhcpv6_prm_only']:
- p.dhcp.v6.options['dhcpv6_prm_only'] = True
-
- if peth['dhcpv6_temporary']:
- p.dhcp.v6.options['dhcpv6_temporary'] = True
-
- if peth['dhcpv6_pd_length']:
- p.dhcp.v6.options['dhcpv6_pd_length'] = peth['dhcpv6_pd_length']
-
- if peth['dhcpv6_pd_interfaces']:
- p.dhcp.v6.options['dhcpv6_pd_interfaces'] = peth['dhcpv6_pd_interfaces']
-
- # ignore link state changes
- p.set_link_detect(peth['disable_link_detect'])
- # configure ARP cache timeout in milliseconds
- p.set_arp_cache_tmo(peth['ip_arp_cache_tmo'])
- # configure ARP filter configuration
- p.set_arp_filter(peth['ip_disable_arp_filter'])
- # configure ARP accept
- p.set_arp_accept(peth['ip_enable_arp_accept'])
- # configure ARP announce
- p.set_arp_announce(peth['ip_enable_arp_announce'])
- # configure ARP ignore
- p.set_arp_ignore(peth['ip_enable_arp_ignore'])
- # Enable proxy-arp on this interface
- p.set_proxy_arp(peth['ip_proxy_arp'])
- # Enable private VLAN proxy ARP on this interface
- p.set_proxy_arp_pvlan(peth['ip_proxy_arp_pvlan'])
- # IPv6 accept RA
- p.set_ipv6_accept_ra(peth['ipv6_accept_ra'])
- # IPv6 address autoconfiguration
- p.set_ipv6_autoconf(peth['ipv6_autoconf'])
- # IPv6 forwarding
- p.set_ipv6_forwarding(peth['ipv6_forwarding'])
- # IPv6 Duplicate Address Detection (DAD) tries
- p.set_ipv6_dad_messages(peth['ipv6_dup_addr_detect'])
-
- # assign/remove VRF (ONLY when not a member of a bridge,
- # otherwise 'nomaster' removes it from it)
- if not peth['is_bridge_member']:
- p.set_vrf(peth['vrf'])
-
- # Delete old IPv6 EUI64 addresses before changing MAC
- for addr in peth['ipv6_eui64_prefix_remove']:
- p.del_ipv6_eui64_address(addr)
-
- # Change interface MAC address
- if peth['mac']:
- p.set_mac(peth['mac'])
-
- # Add IPv6 EUI-based addresses
- for addr in peth['ipv6_eui64_prefix']:
- p.add_ipv6_eui64_address(addr)
-
- # Change interface mode
- p.set_mode(peth['mode'])
-
- # Enable/Disable interface
- if peth['disable']:
- p.set_admin_state('down')
- else:
- p.set_admin_state('up')
-
- # Configure interface address(es)
- # - not longer required addresses get removed first
- # - newly addresses will be added second
- for addr in peth['address_remove']:
- p.del_addr(addr)
- for addr in peth['address']:
- p.add_addr(addr)
-
- # re-add ourselves to any bridge we might have fallen out of
- if peth['is_bridge_member']:
- p.add_to_bridge(peth['is_bridge_member'])
-
- # apply all vlans to interface
- apply_all_vlans(p, peth)
-
+ p = MACVLANIf(peth['ifname'], **conf)
+ p.update(peth)
return None
if __name__ == '__main__':
diff --git a/src/conf_mode/interfaces-vxlan.py b/src/conf_mode/interfaces-vxlan.py
index 39db814b4..47c0bdcb8 100755
--- a/src/conf_mode/interfaces-vxlan.py
+++ b/src/conf_mode/interfaces-vxlan.py
@@ -21,197 +21,61 @@ from copy import deepcopy
from netifaces import interfaces
from vyos.config import Config
+from vyos.configdict import get_interface_dict
+from vyos.configverify import verify_address
+from vyos.configverify import verify_bridge_delete
+from vyos.configverify import verify_source_interface
from vyos.ifconfig import VXLANIf, Interface
-from vyos.validate import is_member
from vyos import ConfigError
-
from vyos import airbag
airbag.enable()
-default_config_data = {
- 'address': [],
- 'deleted': False,
- 'description': '',
- 'disable': False,
- 'group': '',
- 'intf': '',
- 'ip_arp_cache_tmo': 30,
- 'ip_disable_arp_filter': 1,
- 'ip_enable_arp_accept': 0,
- 'ip_enable_arp_announce': 0,
- 'ip_enable_arp_ignore': 0,
- 'ip_proxy_arp': 0,
- 'ipv6_accept_ra': 1,
- 'ipv6_autoconf': 0,
- 'ipv6_eui64_prefix': [],
- 'ipv6_forwarding': 1,
- 'ipv6_dup_addr_detect': 1,
- 'is_bridge_member': False,
- 'source_address': '',
- 'source_interface': '',
- 'mtu': 1450,
- 'remote': '',
- 'remote_port': 8472, # The Linux implementation of VXLAN pre-dates
- # the IANA's selection of a standard destination port
- 'vni': ''
-}
-
def get_config():
- vxlan = deepcopy(default_config_data)
+ """
+ Retrive CLI config as dictionary. Dictionary can never be empty, as at least the
+ interface name will be added or a deleted flag
+ """
conf = Config()
+ base = ['interfaces', 'vxlan']
+ vxlan = get_interface_dict(conf, base)
- # determine tagNode instance
- if 'VYOS_TAGNODE_VALUE' not in os.environ:
- raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified')
-
- vxlan['intf'] = os.environ['VYOS_TAGNODE_VALUE']
-
- # check if interface is member if a bridge
- vxlan['is_bridge_member'] = is_member(conf, vxlan['intf'], 'bridge')
-
- # Check if interface has been removed
- if not conf.exists('interfaces vxlan ' + vxlan['intf']):
- vxlan['deleted'] = True
- return vxlan
-
- # set new configuration level
- conf.set_level('interfaces vxlan ' + vxlan['intf'])
-
- # retrieve configured interface addresses
- if conf.exists('address'):
- vxlan['address'] = conf.return_values('address')
-
- # retrieve interface description
- if conf.exists('description'):
- vxlan['description'] = conf.return_value('description')
-
- # Disable this interface
- if conf.exists('disable'):
- vxlan['disable'] = True
-
- # VXLAN multicast grou
- if conf.exists('group'):
- vxlan['group'] = conf.return_value('group')
-
- # ARP cache entry timeout in seconds
- if conf.exists('ip arp-cache-timeout'):
- vxlan['ip_arp_cache_tmo'] = int(conf.return_value('ip arp-cache-timeout'))
-
- # ARP filter configuration
- if conf.exists('ip disable-arp-filter'):
- vxlan['ip_disable_arp_filter'] = 0
-
- # ARP enable accept
- if conf.exists('ip enable-arp-accept'):
- vxlan['ip_enable_arp_accept'] = 1
-
- # ARP enable announce
- if conf.exists('ip enable-arp-announce'):
- vxlan['ip_enable_arp_announce'] = 1
-
- # ARP enable ignore
- if conf.exists('ip enable-arp-ignore'):
- vxlan['ip_enable_arp_ignore'] = 1
-
- # Enable proxy-arp on this interface
- if conf.exists('ip enable-proxy-arp'):
- vxlan['ip_proxy_arp'] = 1
-
- # Enable acquisition of IPv6 address using stateless autoconfig (SLAAC)
- if conf.exists('ipv6 address autoconf'):
- vxlan['ipv6_autoconf'] = 1
-
- # Get prefixes for IPv6 addressing based on MAC address (EUI-64)
- if conf.exists('ipv6 address eui64'):
- vxlan['ipv6_eui64_prefix'] = conf.return_values('ipv6 address eui64')
-
- # Remove the default link-local address if set.
- if not ( conf.exists('ipv6 address no-default-link-local')
- or vxlan['is_bridge_member'] ):
- # add the link-local by default to make IPv6 work
- vxlan['ipv6_eui64_prefix'].append('fe80::/64')
-
- # Disable IPv6 forwarding on this interface
- if conf.exists('ipv6 disable-forwarding'):
- vxlan['ipv6_forwarding'] = 0
-
- # IPv6 Duplicate Address Detection (DAD) tries
- if conf.exists('ipv6 dup-addr-detect-transmits'):
- vxlan['ipv6_dup_addr_detect'] = int(conf.return_value('ipv6 dup-addr-detect-transmits'))
-
- # to make IPv6 SLAAC and DHCPv6 work with forwarding=1,
- # accept_ra must be 2
- if vxlan['ipv6_autoconf'] or 'dhcpv6' in vxlan['address']:
- vxlan['ipv6_accept_ra'] = 2
-
- # VXLAN source address
- if conf.exists('source-address'):
- vxlan['source_address'] = conf.return_value('source-address')
-
- # VXLAN underlay interface
- if conf.exists('source-interface'):
- vxlan['source_interface'] = conf.return_value('source-interface')
-
- # Maximum Transmission Unit (MTU)
- if conf.exists('mtu'):
- vxlan['mtu'] = int(conf.return_value('mtu'))
-
- # Remote address of VXLAN tunnel
- if conf.exists('remote'):
- vxlan['remote'] = conf.return_value('remote')
-
- # Remote port of VXLAN tunnel
- if conf.exists('port'):
- vxlan['remote_port'] = int(conf.return_value('port'))
-
- # Virtual Network Identifier
- if conf.exists('vni'):
- vxlan['vni'] = conf.return_value('vni')
+ # VXLAN is "special" the default MTU is 1492 - update accordingly
+ # as the config_level is already st in get_interface_dict() - we can use []
+ tmp = conf.get_config_dict([], key_mangling=('-', '_'), get_first_key=True)
+ if 'mtu' not in tmp:
+ vxlan['mtu'] = '1450'
return vxlan
-
def verify(vxlan):
- if vxlan['deleted']:
- if vxlan['is_bridge_member']:
- raise ConfigError((
- f'Cannot delete interface "{vxlan["intf"]}" as it is a '
- f'member of bridge "{vxlan["is_bridge_member"]}"!'))
-
+ if 'deleted' in vxlan:
+ verify_bridge_delete(vxlan)
return None
- if vxlan['mtu'] < 1500:
+ if int(vxlan['mtu']) < 1500:
print('WARNING: RFC7348 recommends VXLAN tunnels preserve a 1500 byte MTU')
- if vxlan['group']:
- if not vxlan['source_interface']:
+ if 'group' in vxlan:
+ if 'source_interface' not in vxlan:
raise ConfigError('Multicast VXLAN requires an underlaying interface ')
- if not vxlan['source_interface'] in interfaces():
- raise ConfigError('VXLAN source interface does not exist')
+ verify_source_interface(vxlan)
- if not (vxlan['group'] or vxlan['remote'] or vxlan['source_address']):
+ if not any(tmp in ['group', 'remote', 'source_address'] for tmp in vxlan):
raise ConfigError('Group, remote or source-address must be configured')
- if not vxlan['vni']:
+ if 'vni' not in vxlan:
raise ConfigError('Must configure VNI for VXLAN')
- if vxlan['source_interface']:
+ if 'source_interface' in vxlan:
# VXLAN adds a 50 byte overhead - we need to check the underlaying MTU
# if our configured MTU is at least 50 bytes less
underlay_mtu = int(Interface(vxlan['source_interface']).get_mtu())
- if underlay_mtu < (vxlan['mtu'] + 50):
+ if underlay_mtu < (int(vxlan['mtu']) + 50):
raise ConfigError('VXLAN has a 50 byte overhead, underlaying device ' \
- 'MTU is to small ({})'.format(underlay_mtu))
-
- if ( vxlan['is_bridge_member']
- and ( vxlan['address']
- or vxlan['ipv6_eui64_prefix']
- or vxlan['ipv6_autoconf'] ) ):
- raise ConfigError((
- f'Cannot assign address to interface "{vxlan["intf"]}" '
- f'as it is a member of bridge "{vxlan["is_bridge_member"]}"!'))
+ f'MTU is to small ({underlay_mtu} bytes)')
+ verify_address(vxlan)
return None
@@ -221,73 +85,26 @@ def generate(vxlan):
def apply(vxlan):
# Check if the VXLAN interface already exists
- if vxlan['intf'] in interfaces():
- v = VXLANIf(vxlan['intf'])
+ if vxlan['ifname'] in interfaces():
+ v = VXLANIf(vxlan['ifname'])
# VXLAN is super picky and the tunnel always needs to be recreated,
# thus we can simply always delete it first.
v.remove()
- if not vxlan['deleted']:
+ if 'deleted' not in vxlan:
# VXLAN interface needs to be created on-block
# instead of passing a ton of arguments, I just use a dict
# that is managed by vyos.ifconfig
conf = deepcopy(VXLANIf.get_config())
# Assign VXLAN instance configuration parameters to config dict
- conf['vni'] = vxlan['vni']
- conf['group'] = vxlan['group']
- conf['src_address'] = vxlan['source_address']
- conf['src_interface'] = vxlan['source_interface']
- conf['remote'] = vxlan['remote']
- conf['port'] = vxlan['remote_port']
+ for tmp in ['vni', 'group', 'source_address', 'source_interface', 'remote', 'port']:
+ if tmp in vxlan:
+ conf[tmp] = vxlan[tmp]
# Finally create the new interface
- v = VXLANIf(vxlan['intf'], **conf)
- # update interface description used e.g. by SNMP
- v.set_alias(vxlan['description'])
- # Maximum Transfer Unit (MTU)
- v.set_mtu(vxlan['mtu'])
-
- # configure ARP cache timeout in milliseconds
- v.set_arp_cache_tmo(vxlan['ip_arp_cache_tmo'])
- # configure ARP filter configuration
- v.set_arp_filter(vxlan['ip_disable_arp_filter'])
- # configure ARP accept
- v.set_arp_accept(vxlan['ip_enable_arp_accept'])
- # configure ARP announce
- v.set_arp_announce(vxlan['ip_enable_arp_announce'])
- # configure ARP ignore
- v.set_arp_ignore(vxlan['ip_enable_arp_ignore'])
- # Enable proxy-arp on this interface
- v.set_proxy_arp(vxlan['ip_proxy_arp'])
- # IPv6 accept RA
- v.set_ipv6_accept_ra(vxlan['ipv6_accept_ra'])
- # IPv6 address autoconfiguration
- v.set_ipv6_autoconf(vxlan['ipv6_autoconf'])
- # IPv6 forwarding
- v.set_ipv6_forwarding(vxlan['ipv6_forwarding'])
- # IPv6 Duplicate Address Detection (DAD) tries
- v.set_ipv6_dad_messages(vxlan['ipv6_dup_addr_detect'])
-
- # Configure interface address(es) - no need to implicitly delete the
- # old addresses as they have already been removed by deleting the
- # interface above
- for addr in vxlan['address']:
- v.add_addr(addr)
-
- # IPv6 EUI-based addresses
- for addr in vxlan['ipv6_eui64_prefix']:
- v.add_ipv6_eui64_address(addr)
-
- # As the VXLAN interface is always disabled first when changing
- # parameters we will only re-enable the interface if it is not
- # administratively disabled
- if not vxlan['disable']:
- v.set_admin_state('up')
-
- # re-add ourselves to any bridge we might have fallen out of
- if vxlan['is_bridge_member']:
- v.add_to_bridge(vxlan['is_bridge_member'])
+ v = VXLANIf(vxlan['ifname'], **conf)
+ v.update(vxlan)
return None
diff --git a/src/conf_mode/interfaces-wireguard.py b/src/conf_mode/interfaces-wireguard.py
index c24c9a7ce..8b64cde4d 100755
--- a/src/conf_mode/interfaces-wireguard.py
+++ b/src/conf_mode/interfaces-wireguard.py
@@ -15,308 +15,98 @@
# along with this program. If not, see <http://www.gnu.org/licenses/>.
import os
-import re
from sys import exit
from copy import deepcopy
-from netifaces import interfaces
from vyos.config import Config
-from vyos.configdict import list_diff
+from vyos.configdict import dict_merge
+from vyos.configdict import get_interface_dict
+from vyos.configdict import node_changed
+from vyos.configdict import leaf_node_changed
+from vyos.configverify import verify_vrf
+from vyos.configverify import verify_address
+from vyos.configverify import verify_bridge_delete
from vyos.ifconfig import WireGuardIf
-from vyos.util import chown, chmod_750, call
-from vyos.validate import is_member, is_ipv6
+from vyos.util import check_kmod
from vyos import ConfigError
-
from vyos import airbag
airbag.enable()
-kdir = r'/config/auth/wireguard'
-
-default_config_data = {
- 'intfc': '',
- 'address': [],
- 'address_remove': [],
- 'description': '',
- 'listen_port': '',
- 'deleted': False,
- 'disable': False,
- 'fwmark': 0,
- 'is_bridge_member': False,
- 'mtu': 1420,
- 'peer': [],
- 'peer_remove': [], # stores public keys of peers to remove
- 'pk': f'{kdir}/default/private.key',
- 'vrf': ''
-}
-
-def _check_kmod():
- modules = ['wireguard']
- for module in modules:
- if not os.path.exists(f'/sys/module/{module}'):
- if call(f'modprobe {module}') != 0:
- raise ConfigError(f'Loading Kernel module {module} failed')
-
-
-def _migrate_default_keys():
- if os.path.exists(f'{kdir}/private.key') and not os.path.exists(f'{kdir}/default/private.key'):
- location = f'{kdir}/default'
- if not os.path.exists(location):
- os.makedirs(location)
-
- chown(location, 'root', 'vyattacfg')
- chmod_750(location)
- os.rename(f'{kdir}/private.key', f'{location}/private.key')
- os.rename(f'{kdir}/public.key', f'{location}/public.key')
-
-
def get_config():
+ """
+ Retrive CLI config as dictionary. Dictionary can never be empty, as at least the
+ interface name will be added or a deleted flag
+ """
conf = Config()
base = ['interfaces', 'wireguard']
-
- # determine tagNode instance
- if 'VYOS_TAGNODE_VALUE' not in os.environ:
- raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified')
-
- wg = deepcopy(default_config_data)
- wg['intf'] = os.environ['VYOS_TAGNODE_VALUE']
-
- # check if interface is member if a bridge
- wg['is_bridge_member'] = is_member(conf, wg['intf'], 'bridge')
-
- # Check if interface has been removed
- if not conf.exists(base + [wg['intf']]):
- wg['deleted'] = True
- return wg
-
- conf.set_level(base + [wg['intf']])
-
- # retrieve configured interface addresses
- if conf.exists(['address']):
- wg['address'] = conf.return_values(['address'])
-
- # get interface addresses (currently effective) - to determine which
- # address is no longer valid and needs to be removed
- eff_addr = conf.return_effective_values(['address'])
- wg['address_remove'] = list_diff(eff_addr, wg['address'])
-
- # retrieve interface description
- if conf.exists(['description']):
- wg['description'] = conf.return_value(['description'])
-
- # disable interface
- if conf.exists(['disable']):
- wg['disable'] = True
-
- # local port to listen on
- if conf.exists(['port']):
- wg['listen_port'] = conf.return_value(['port'])
-
- # fwmark value
- if conf.exists(['fwmark']):
- wg['fwmark'] = int(conf.return_value(['fwmark']))
-
- # Maximum Transmission Unit (MTU)
- if conf.exists('mtu'):
- wg['mtu'] = int(conf.return_value(['mtu']))
-
- # retrieve VRF instance
- if conf.exists('vrf'):
- wg['vrf'] = conf.return_value('vrf')
-
- # private key
- if conf.exists(['private-key']):
- wg['pk'] = "{0}/{1}/private.key".format(
- kdir, conf.return_value(['private-key']))
-
- # peer removal, wg identifies peers by its pubkey
- peer_eff = conf.list_effective_nodes(['peer'])
- peer_rem = list_diff(peer_eff, conf.list_nodes(['peer']))
- for peer in peer_rem:
- wg['peer_remove'].append(
- conf.return_effective_value(['peer', peer, 'pubkey']))
-
- # peer settings
- if conf.exists(['peer']):
- for p in conf.list_nodes(['peer']):
- # set new config level for this peer
- conf.set_level(base + [wg['intf'], 'peer', p])
- peer = {
- 'allowed-ips': [],
- 'address': '',
- 'name': p,
- 'persistent_keepalive': '',
- 'port': '',
- 'psk': '',
- 'pubkey': ''
- }
-
- # peer allowed-ips
- if conf.exists(['allowed-ips']):
- peer['allowed-ips'] = conf.return_values(['allowed-ips'])
-
- # peer address
- if conf.exists(['address']):
- peer['address'] = conf.return_value(['address'])
-
- # peer port
- if conf.exists(['port']):
- peer['port'] = conf.return_value(['port'])
-
- # persistent-keepalive
- if conf.exists(['persistent-keepalive']):
- peer['persistent_keepalive'] = conf.return_value(['persistent-keepalive'])
-
- # preshared-key
- if conf.exists(['preshared-key']):
- peer['psk'] = conf.return_value(['preshared-key'])
-
- # peer pubkeys
- if conf.exists(['pubkey']):
- key_eff = conf.return_effective_value(['pubkey'])
- key_cfg = conf.return_value(['pubkey'])
- peer['pubkey'] = key_cfg
-
- # on a pubkey change we need to remove the pubkey first
- # peers are identified by pubkey, so key update means
- # peer removal and re-add
- if key_eff != key_cfg and key_eff != None:
- wg['peer_remove'].append(key_cfg)
-
- # if a peer is disabled, we have to exec a remove for it's pubkey
- if conf.exists(['disable']):
- wg['peer_remove'].append(peer['pubkey'])
- else:
- wg['peer'].append(peer)
-
- return wg
-
-
-def verify(wg):
- if wg['deleted']:
- if wg['is_bridge_member']:
- raise ConfigError((
- f'Cannot delete interface "{wg["intf"]}" as it is a member '
- f'of bridge "{wg["is_bridge_member"]}"!'))
-
+ wireguard = get_interface_dict(conf, base)
+
+ # Wireguard is "special" the default MTU is 1420 - update accordingly
+ # as the config_level is already st in get_interface_dict() - we can use []
+ tmp = conf.get_config_dict([], key_mangling=('-', '_'), get_first_key=True)
+ if 'mtu' not in tmp:
+ wireguard['mtu'] = '1420'
+
+ # Mangle private key - it has a default so its always valid
+ wireguard['private_key'] = '/config/auth/wireguard/{private_key}/private.key'.format(**wireguard)
+
+ # Determine which Wireguard peer has been removed.
+ # Peers can only be removed with their public key!
+ tmp = node_changed(conf, ['peer'])
+ if tmp:
+ dict = {}
+ for peer in tmp:
+ peer_config = leaf_node_changed(conf, ['peer', peer, 'pubkey'])
+ dict = dict_merge({'peer_remove' : {peer : {'pubkey' : peer_config}}}, dict)
+ wireguard.update(dict)
+
+ return wireguard
+
+def verify(wireguard):
+ if 'deleted' in wireguard:
+ verify_bridge_delete(wireguard)
return None
- if wg['is_bridge_member'] and wg['address']:
- raise ConfigError((
- f'Cannot assign address to interface "{wg["intf"]}" '
- f'as it is a member of bridge "{wg["is_bridge_member"]}"!'))
+ verify_address(wireguard)
+ verify_vrf(wireguard)
- if wg['vrf']:
- if wg['vrf'] not in interfaces():
- raise ConfigError(f'VRF "{wg["vrf"]}" does not exist')
+ if not os.path.exists(wireguard['private_key']):
+ raise ConfigError('Wireguard private-key not found! Execute: ' \
+ '"run generate wireguard [default-keypair|named-keypairs]"')
- if wg['is_bridge_member']:
- raise ConfigError((
- f'Interface "{wg["intf"]}" cannot be member of VRF '
- f'"{wg["vrf"]}" and bridge {wg["is_bridge_member"]} '
- f'at the same time!'))
+ if 'address' not in wireguard:
+ raise ConfigError('IP address required!')
- if not os.path.exists(wg['pk']):
- raise ConfigError('No keys found, generate them by executing:\n' \
- '"run generate wireguard [keypair|named-keypairs]"')
-
- if not wg['address']:
- raise ConfigError(f'IP address required for interface "{wg["intf"]}"!')
-
- if not wg['peer']:
- raise ConfigError(f'Peer required for interface "{wg["intf"]}"!')
+ if 'peer' not in wireguard:
+ raise ConfigError('At least one Wireguard peer is required!')
# run checks on individual configured WireGuard peer
- for peer in wg['peer']:
- if not peer['allowed-ips']:
- raise ConfigError(f'Peer allowed-ips required for peer "{peer["name"]}"!')
-
- if not peer['pubkey']:
- raise ConfigError(f'Peer public-key required for peer "{peer["name"]}"!')
+ for tmp in wireguard['peer']:
+ peer = wireguard['peer'][tmp]
- if peer['address'] and not peer['port']:
- raise ConfigError(f'Peer "{peer["name"]}" port must be defined if address is defined!')
+ if 'allowed_ips' not in peer:
+ raise ConfigError(f'Wireguard allowed-ips required for peer "{tmp}"!')
- if not peer['address'] and peer['port']:
- raise ConfigError(f'Peer "{peer["name"]}" address must be defined if port is defined!')
+ if 'pubkey' not in peer:
+ raise ConfigError(f'Wireguard public-key required for peer "{tmp}"!')
+ if ('address' in peer and 'port' not in peer) or ('port' in peer and 'address' not in peer):
+ raise ConfigError('Both Wireguard port and address must be defined '
+ f'for peer "{tmp}" if either one of them is set!')
-def apply(wg):
- # init wg class
- w = WireGuardIf(wg['intf'])
-
- # single interface removal
- if wg['deleted']:
- w.remove()
+def apply(wireguard):
+ if 'deleted' in wireguard:
+ WireGuardIf(wireguard['ifname']).remove()
return None
- # Configure interface address(es)
- # - not longer required addresses get removed first
- # - newly addresses will be added second
- for addr in wg['address_remove']:
- w.del_addr(addr)
- for addr in wg['address']:
- w.add_addr(addr)
-
- # Maximum Transmission Unit (MTU)
- w.set_mtu(wg['mtu'])
-
- # update interface description used e.g. within SNMP
- w.set_alias(wg['description'])
-
- # assign/remove VRF (ONLY when not a member of a bridge,
- # otherwise 'nomaster' removes it from it)
- if not wg['is_bridge_member']:
- w.set_vrf(wg['vrf'])
-
- # remove peers
- for pub_key in wg['peer_remove']:
- w.remove_peer(pub_key)
-
- # peer pubkey
- # setting up the wg interface
- w.config['private_key'] = c['pk']
-
- for peer in wg['peer']:
- # peer pubkey
- w.config['pubkey'] = peer['pubkey']
- # peer allowed-ips
- w.config['allowed-ips'] = peer['allowed-ips']
- # local listen port
- if wg['listen_port']:
- w.config['port'] = wg['listen_port']
- # fwmark
- if c['fwmark']:
- w.config['fwmark'] = wg['fwmark']
-
- # endpoint
- if peer['address'] and peer['port']:
- if is_ipv6(peer['address']):
- w.config['endpoint'] = '[{}]:{}'.format(peer['address'], peer['port'])
- else:
- w.config['endpoint'] = '{}:{}'.format(peer['address'], peer['port'])
-
- # persistent-keepalive
- if peer['persistent_keepalive']:
- w.config['keepalive'] = peer['persistent_keepalive']
-
- if peer['psk']:
- w.config['psk'] = peer['psk']
-
- w.update()
-
- # Enable/Disable interface
- if wg['disable']:
- w.set_admin_state('down')
- else:
- w.set_admin_state('up')
-
+ w = WireGuardIf(wireguard['ifname'])
+ w.update(wireguard)
return None
if __name__ == '__main__':
try:
- _check_kmod()
- _migrate_default_keys()
+ check_kmod('wireguard')
c = get_config()
verify(c)
apply(c)
diff --git a/src/conf_mode/interfaces-wireless.py b/src/conf_mode/interfaces-wireless.py
index 0162b642c..b6f247952 100755
--- a/src/conf_mode/interfaces-wireless.py
+++ b/src/conf_mode/interfaces-wireless.py
@@ -15,497 +15,163 @@
# along with this program. If not, see <http://www.gnu.org/licenses/>.
import os
+
from sys import exit
from re import findall
-
from copy import deepcopy
-
-from netifaces import interfaces
from netaddr import EUI, mac_unix_expanded
from vyos.config import Config
-from vyos.configdict import list_diff, intf_to_dict, add_to_dict, interface_default_data
-from vyos.ifconfig import WiFiIf, Section
-from vyos.ifconfig_vlan import apply_all_vlans, verify_vlan_config
+from vyos.configdict import get_interface_dict
+from vyos.configdict import dict_merge
+from vyos.configverify import verify_address
+from vyos.configverify import verify_bridge_delete
+from vyos.configverify import verify_dhcpv6
+from vyos.configverify import verify_source_interface
+from vyos.configverify import verify_vlan_config
+from vyos.configverify import verify_vrf
+from vyos.ifconfig import WiFiIf
from vyos.template import render
-from vyos.util import chown, call
-from vyos.validate import is_member
+from vyos.util import call
from vyos import ConfigError
-
from vyos import airbag
airbag.enable()
-default_config_data = {
- **interface_default_data,
- 'cap_ht' : False,
- 'cap_ht_40mhz_incapable' : False,
- 'cap_ht_powersave' : False,
- 'cap_ht_chan_set_width' : '',
- 'cap_ht_delayed_block_ack' : False,
- 'cap_ht_dsss_cck_40' : False,
- 'cap_ht_greenfield' : False,
- 'cap_ht_ldpc' : False,
- 'cap_ht_lsig_protection' : False,
- 'cap_ht_max_amsdu' : '',
- 'cap_ht_short_gi' : [],
- 'cap_ht_smps' : '',
- 'cap_ht_stbc_rx' : '',
- 'cap_ht_stbc_tx' : False,
- 'cap_req_ht' : False,
- 'cap_req_vht' : False,
- 'cap_vht' : False,
- 'cap_vht_antenna_cnt' : '',
- 'cap_vht_antenna_fixed' : False,
- 'cap_vht_beamform' : '',
- 'cap_vht_center_freq_1' : '',
- 'cap_vht_center_freq_2' : '',
- 'cap_vht_chan_set_width' : '',
- 'cap_vht_ldpc' : False,
- 'cap_vht_link_adaptation' : '',
- 'cap_vht_max_mpdu_exp' : '',
- 'cap_vht_max_mpdu' : '',
- 'cap_vht_short_gi' : [],
- 'cap_vht_stbc_rx' : '',
- 'cap_vht_stbc_tx' : False,
- 'cap_vht_tx_powersave' : False,
- 'cap_vht_vht_cf' : False,
- 'channel': '',
- 'country_code': '',
- 'deleted': False,
- 'disable_broadcast_ssid' : False,
- 'disable_link_detect' : 1,
- 'expunge_failing_stations' : False,
- 'hw_id' : '',
- 'intf': '',
- 'isolate_stations' : False,
- 'max_stations' : '',
- 'mgmt_frame_protection' : 'disabled',
- 'mode' : 'g',
- 'phy' : '',
- 'reduce_transmit_power' : '',
- 'sec_wep' : False,
- 'sec_wep_key' : [],
- 'sec_wpa' : False,
- 'sec_wpa_cipher' : [],
- 'sec_wpa_mode' : 'both',
- 'sec_wpa_passphrase' : '',
- 'sec_wpa_radius' : [],
- 'ssid' : '',
- 'op_mode' : 'monitor',
- 'vif': {},
- 'vif_remove': [],
- 'vif_s': {},
- 'vif_s_remove': []
-}
-
# XXX: wpa_supplicant works on the source interface
-wpa_suppl_conf = '/run/wpa_supplicant/{intf}.conf'
-hostapd_conf = '/run/hostapd/{intf}.conf'
+wpa_suppl_conf = '/run/wpa_supplicant/{ifname}.conf'
+hostapd_conf = '/run/hostapd/{ifname}.conf'
+
+def find_other_stations(conf, base, ifname):
+ """
+ Only one wireless interface per phy can be in station mode -
+ find all interfaces attached to a phy which run in station mode
+ """
+ old_level = conf.get_level()
+ conf.set_level(base)
+ dict = {}
+ for phy in os.listdir('/sys/class/ieee80211'):
+ list = []
+ for interface in conf.list_nodes([]):
+ if interface == ifname:
+ continue
+ # the following node is mandatory
+ if conf.exists([interface, 'physical-device', phy]):
+ tmp = conf.return_value([interface, 'type'])
+ if tmp == 'station':
+ list.append(interface)
+ if list:
+ dict.update({phy: list})
+ conf.set_level(old_level)
+ return dict
def get_config():
- # determine tagNode instance
- if 'VYOS_TAGNODE_VALUE' not in os.environ:
- raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified')
-
- ifname = os.environ['VYOS_TAGNODE_VALUE']
+ """
+ Retrive CLI config as dictionary. Dictionary can never be empty, as at least the
+ interface name will be added or a deleted flag
+ """
conf = Config()
-
- # check if wireless interface has been removed
- cfg_base = ['interfaces', 'wireless ', ifname]
- if not conf.exists(cfg_base):
- wifi = deepcopy(default_config_data)
- wifi['intf'] = ifname
- wifi['deleted'] = True
- # we need to know if we're a bridge member so we can refuse deletion
- wifi['is_bridge_member'] = is_member(conf, wifi['intf'], 'bridge')
- # we can not bail out early as wireless interface can not be removed
- # Kernel will complain with: RTNETLINK answers: Operation not supported.
- # Thus we need to remove individual settings
- return wifi
-
- # set new configuration level
- conf.set_level(cfg_base)
-
- # get common interface settings
- wifi, disabled = intf_to_dict(conf, default_config_data)
-
- # 40MHz intolerance, use 20MHz only
- if conf.exists('capabilities ht 40mhz-incapable'):
- wifi['cap_ht'] = True
- wifi['cap_ht_40mhz_incapable'] = True
-
- # WMM-PS Unscheduled Automatic Power Save Delivery [U-APSD]
- if conf.exists('capabilities ht auto-powersave'):
- wifi['cap_ht'] = True
- wifi['cap_ht_powersave'] = True
-
- # Supported channel set width
- if conf.exists('capabilities ht channel-set-width'):
- wifi['cap_ht'] = True
- wifi['cap_ht_chan_set_width'] = conf.return_values('capabilities ht channel-set-width')
-
- # HT-delayed Block Ack
- if conf.exists('capabilities ht delayed-block-ack'):
- wifi['cap_ht'] = True
- wifi['cap_ht_delayed_block_ack'] = True
-
- # DSSS/CCK Mode in 40 MHz
- if conf.exists('capabilities ht dsss-cck-40'):
- wifi['cap_ht'] = True
- wifi['cap_ht_dsss_cck_40'] = True
-
- # HT-greenfield capability
- if conf.exists('capabilities ht greenfield'):
- wifi['cap_ht'] = True
- wifi['cap_ht_greenfield'] = True
-
- # LDPC coding capability
- if conf.exists('capabilities ht ldpc'):
- wifi['cap_ht'] = True
- wifi['cap_ht_ldpc'] = True
-
- # L-SIG TXOP protection capability
- if conf.exists('capabilities ht lsig-protection'):
- wifi['cap_ht'] = True
- wifi['cap_ht_lsig_protection'] = True
-
- # Set Maximum A-MSDU length
- if conf.exists('capabilities ht max-amsdu'):
- wifi['cap_ht'] = True
- wifi['cap_ht_max_amsdu'] = conf.return_value('capabilities ht max-amsdu')
-
- # Short GI capabilities
- if conf.exists('capabilities ht short-gi'):
- wifi['cap_ht'] = True
- wifi['cap_ht_short_gi'] = conf.return_values('capabilities ht short-gi')
-
- # Spatial Multiplexing Power Save (SMPS) settings
- if conf.exists('capabilities ht smps'):
- wifi['cap_ht'] = True
- wifi['cap_ht_smps'] = conf.return_value('capabilities ht smps')
-
- # Support for receiving PPDU using STBC (Space Time Block Coding)
- if conf.exists('capabilities ht stbc rx'):
- wifi['cap_ht'] = True
- wifi['cap_ht_stbc_rx'] = conf.return_value('capabilities ht stbc rx')
-
- # Support for sending PPDU using STBC (Space Time Block Coding)
- if conf.exists('capabilities ht stbc tx'):
- wifi['cap_ht'] = True
- wifi['cap_ht_stbc_tx'] = True
-
- # Require stations to support HT PHY (reject association if they do not)
- if conf.exists('capabilities require-ht'):
- wifi['cap_req_ht'] = True
-
- # Require stations to support VHT PHY (reject association if they do not)
- if conf.exists('capabilities require-vht'):
- wifi['cap_req_vht'] = True
-
- # Number of antennas on this card
- if conf.exists('capabilities vht antenna-count'):
- wifi['cap_vht'] = True
- wifi['cap_vht_antenna_cnt'] = conf.return_value('capabilities vht antenna-count')
-
- # set if antenna pattern does not change during the lifetime of an association
- if conf.exists('capabilities vht antenna-pattern-fixed'):
- wifi['cap_vht'] = True
- wifi['cap_vht_antenna_fixed'] = True
-
- # Beamforming capabilities
- if conf.exists('capabilities vht beamform'):
- wifi['cap_vht'] = True
- wifi['cap_vht_beamform'] = conf.return_values('capabilities vht beamform')
-
- # VHT operating channel center frequency - center freq 1 (for use with 80, 80+80 and 160 modes)
- if conf.exists('capabilities vht center-channel-freq freq-1'):
- wifi['cap_vht'] = True
- wifi['cap_vht_center_freq_1'] = conf.return_value('capabilities vht center-channel-freq freq-1')
-
- # VHT operating channel center frequency - center freq 2 (for use with the 80+80 mode)
- if conf.exists('capabilities vht center-channel-freq freq-2'):
- wifi['cap_vht'] = True
- wifi['cap_vht_center_freq_2'] = conf.return_value('capabilities vht center-channel-freq freq-2')
-
- # VHT operating Channel width
- if conf.exists('capabilities vht channel-set-width'):
- wifi['cap_vht'] = True
- wifi['cap_vht_chan_set_width'] = conf.return_value('capabilities vht channel-set-width')
-
- # LDPC coding capability
- if conf.exists('capabilities vht ldpc'):
- wifi['cap_vht'] = True
- wifi['cap_vht_ldpc'] = True
-
- # VHT link adaptation capabilities
- if conf.exists('capabilities vht link-adaptation'):
- wifi['cap_vht'] = True
- wifi['cap_vht_link_adaptation'] = conf.return_value('capabilities vht link-adaptation')
-
- # Set the maximum length of A-MPDU pre-EOF padding that the station can receive
- if conf.exists('capabilities vht max-mpdu-exp'):
- wifi['cap_vht'] = True
- wifi['cap_vht_max_mpdu_exp'] = conf.return_value('capabilities vht max-mpdu-exp')
-
- # Increase Maximum MPDU length
- if conf.exists('capabilities vht max-mpdu'):
- wifi['cap_vht'] = True
- wifi['cap_vht_max_mpdu'] = conf.return_value('capabilities vht max-mpdu')
-
- # Increase Maximum MPDU length
- if conf.exists('capabilities vht short-gi'):
- wifi['cap_vht'] = True
- wifi['cap_vht_short_gi'] = conf.return_values('capabilities vht short-gi')
-
- # Support for receiving PPDU using STBC (Space Time Block Coding)
- if conf.exists('capabilities vht stbc rx'):
- wifi['cap_vht'] = True
- wifi['cap_vht_stbc_rx'] = conf.return_value('capabilities vht stbc rx')
-
- # Support for the transmission of at least 2x1 STBC (Space Time Block Coding)
- if conf.exists('capabilities vht stbc tx'):
- wifi['cap_vht'] = True
- wifi['cap_vht_stbc_tx'] = True
-
- # Support for VHT TXOP Power Save Mode
- if conf.exists('capabilities vht tx-powersave'):
- wifi['cap_vht'] = True
- wifi['cap_vht_tx_powersave'] = True
-
- # STA supports receiving a VHT variant HT Control field
- if conf.exists('capabilities vht vht-cf'):
- wifi['cap_vht'] = True
- wifi['cap_vht_vht_cf'] = True
-
- # Wireless radio channel
- if conf.exists('channel'):
- wifi['channel'] = conf.return_value('channel')
-
- # Disable broadcast of SSID from access-point
- if conf.exists('disable-broadcast-ssid'):
- wifi['disable_broadcast_ssid'] = True
-
- # Disassociate stations based on excessive transmission failures
- if conf.exists('expunge-failing-stations'):
- wifi['expunge_failing_stations'] = True
-
- # retrieve real hardware address
- if conf.exists('hw-id'):
- wifi['hw_id'] = conf.return_value('hw-id')
-
- # Isolate stations on the AP so they cannot see each other
- if conf.exists('isolate-stations'):
- wifi['isolate_stations'] = True
-
- # Wireless physical device
- if conf.exists('physical-device'):
- wifi['phy'] = conf.return_value('physical-device')
-
- # Maximum number of wireless radio stations
- if conf.exists('max-stations'):
- wifi['max_stations'] = conf.return_value('max-stations')
-
- # Management Frame Protection (MFP) according to IEEE 802.11w
- if conf.exists('mgmt-frame-protection'):
- wifi['mgmt_frame_protection'] = conf.return_value('mgmt-frame-protection')
-
- # Wireless radio mode
- if conf.exists('mode'):
- wifi['mode'] = conf.return_value('mode')
-
- # Transmission power reduction in dBm
- if conf.exists('reduce-transmit-power'):
- wifi['reduce_transmit_power'] = conf.return_value('reduce-transmit-power')
-
- # WEP enabled?
- if conf.exists('security wep'):
- wifi['sec_wep'] = True
-
- # WEP encryption key(s)
- if conf.exists('security wep key'):
- wifi['sec_wep_key'] = conf.return_values('security wep key')
-
- # WPA enabled?
- if conf.exists('security wpa'):
- wifi['sec_wpa'] = True
-
- # WPA Cipher suite
- if conf.exists('security wpa cipher'):
- wifi['sec_wpa_cipher'] = conf.return_values('security wpa cipher')
-
- # WPA mode
- if conf.exists('security wpa mode'):
- wifi['sec_wpa_mode'] = conf.return_value('security wpa mode')
-
- # WPA default ciphers depend on WPA mode
- if not wifi['sec_wpa_cipher']:
- if wifi['sec_wpa_mode'] == 'wpa':
- wifi['sec_wpa_cipher'].append('TKIP')
- wifi['sec_wpa_cipher'].append('CCMP')
-
- elif wifi['sec_wpa_mode'] == 'wpa2':
- wifi['sec_wpa_cipher'].append('CCMP')
-
- elif wifi['sec_wpa_mode'] == 'both':
- wifi['sec_wpa_cipher'].append('CCMP')
- wifi['sec_wpa_cipher'].append('TKIP')
-
- # WPA Group Cipher suite
- if conf.exists('security wpa group-cipher'):
- wifi['sec_wpa_group_cipher'] = conf.return_values('security wpa group-cipher')
-
- # WPA personal shared pass phrase
- if conf.exists('security wpa passphrase'):
- wifi['sec_wpa_passphrase'] = conf.return_value('security wpa passphrase')
-
- # WPA RADIUS source address
- if conf.exists('security wpa radius source-address'):
- wifi['sec_wpa_radius_source'] = conf.return_value('security wpa radius source-address')
-
- # WPA RADIUS server
- for server in conf.list_nodes('security wpa radius server'):
- # set new configuration level
- conf.set_level(cfg_base + ' security wpa radius server ' + server)
- radius = {
- 'server' : server,
- 'acc_port' : '',
- 'disabled': False,
- 'port' : 1812,
- 'key' : ''
- }
-
- # RADIUS server port
- if conf.exists('port'):
- radius['port'] = int(conf.return_value('port'))
-
- # receive RADIUS accounting info
- if conf.exists('accounting'):
- radius['acc_port'] = radius['port'] + 1
-
- # Check if RADIUS server was temporary disabled
- if conf.exists(['disable']):
- radius['disabled'] = True
-
- # RADIUS server shared-secret
- if conf.exists('key'):
- radius['key'] = conf.return_value('key')
-
- # append RADIUS server to list of servers
- wifi['sec_wpa_radius'].append(radius)
-
- # re-set configuration level to parse new nodes
- conf.set_level(cfg_base)
-
- # Wireless access-point service set identifier (SSID)
- if conf.exists('ssid'):
- wifi['ssid'] = conf.return_value('ssid')
-
- # Wireless device type for this interface
- if conf.exists('type'):
- tmp = conf.return_value('type')
- if tmp == 'access-point':
- tmp = 'ap'
-
- wifi['op_mode'] = tmp
+ base = ['interfaces', 'wireless']
+ wifi = get_interface_dict(conf, base)
+
+ if 'security' in wifi and 'wpa' in wifi['security']:
+ wpa_cipher = wifi['security']['wpa'].get('cipher')
+ wpa_mode = wifi['security']['wpa'].get('mode')
+ if not wpa_cipher:
+ tmp = None
+ if wpa_mode == 'wpa':
+ tmp = {'security': {'wpa': {'cipher' : ['TKIP', 'CCMP']}}}
+ elif wpa_mode == 'wpa2':
+ tmp = {'security': {'wpa': {'cipher' : ['CCMP']}}}
+ elif wpa_mode == 'both':
+ tmp = {'security': {'wpa': {'cipher' : ['CCMP', 'TKIP']}}}
+
+ if tmp: wifi = dict_merge(tmp, wifi)
# retrieve configured regulatory domain
- conf.set_level('system')
- if conf.exists('wifi-regulatory-domain'):
- wifi['country_code'] = conf.return_value('wifi-regulatory-domain')
+ conf.set_level(['system'])
+ if conf.exists(['wifi-regulatory-domain']):
+ wifi['country_code'] = conf.return_value(['wifi-regulatory-domain'])
- return wifi
+ # Only one wireless interface per phy can be in station mode
+ tmp = find_other_stations(conf, base, wifi['ifname'])
+ if tmp: wifi['station_interfaces'] = tmp
+ return wifi
def verify(wifi):
- if wifi['deleted']:
- if wifi['is_bridge_member']:
- raise ConfigError((
- f'Cannot delete interface "{wifi["intf"]}" as it is a '
- f'member of bridge "{wifi["is_bridge_member"]}"!'))
-
+ if 'deleted' in wifi:
+ verify_bridge_delete(wifi)
return None
- if wifi['op_mode'] != 'monitor' and not wifi['ssid']:
- raise ConfigError('SSID must be set for {}'.format(wifi['intf']))
+ if 'physical_device' not in wifi:
+ raise ConfigError('You must specify a physical-device "phy"')
- if not wifi['phy']:
- raise ConfigError('You must specify physical-device')
-
- if not wifi['mode']:
+ if 'type' not in wifi:
raise ConfigError('You must specify a WiFi mode')
- if wifi['op_mode'] == 'ap':
- c = Config()
- if not c.exists('system wifi-regulatory-domain'):
- raise ConfigError('Wireless regulatory domain is mandatory,\n' \
- 'use "set system wifi-regulatory-domain".')
-
- if not wifi['channel']:
- raise ConfigError('Channel must be set for {}'.format(wifi['intf']))
-
- if len(wifi['sec_wep_key']) > 4:
- raise ConfigError('No more then 4 WEP keys configurable')
+ if 'ssid' not in wifi and wifi['type'] != 'monitor':
+ raise ConfigError('SSID must be configured')
- if wifi['cap_vht'] and not wifi['cap_ht']:
- raise ConfigError('Specify HT flags if you want to use VHT!')
-
- if wifi['cap_vht_beamform'] and wifi['cap_vht_antenna_cnt'] == 1:
- raise ConfigError('Cannot use beam forming with just one antenna!')
-
- if wifi['cap_vht_beamform'] == 'single-user-beamformer' and wifi['cap_vht_antenna_cnt'] < 3:
- # Nasty Gotcha: see https://w1.fi/cgit/hostap/plain/hostapd/hostapd.conf lines 692-705
- raise ConfigError('Single-user beam former requires at least 3 antennas!')
-
- if wifi['sec_wep'] and (len(wifi['sec_wep_key']) == 0):
- raise ConfigError('Missing WEP keys')
-
- if wifi['sec_wpa'] and not (wifi['sec_wpa_passphrase'] or wifi['sec_wpa_radius']):
- raise ConfigError('Misssing WPA key or RADIUS server')
-
- for radius in wifi['sec_wpa_radius']:
- if not radius['key']:
- raise ConfigError('Misssing RADIUS shared secret key for server: {}'.format(radius['server']))
-
- if ( wifi['is_bridge_member']
- and ( wifi['address']
- or wifi['ipv6_eui64_prefix']
- or wifi['ipv6_autoconf'] ) ):
- raise ConfigError((
- f'Cannot assign address to interface "{wifi["intf"]}" '
- f'as it is a member of bridge "{wifi["is_bridge_member"]}"!'))
-
- if wifi['vrf']:
- if wifi['vrf'] not in interfaces():
- raise ConfigError(f'VRF "{wifi["vrf"]}" does not exist')
-
- if wifi['is_bridge_member']:
- raise ConfigError((
- f'Interface "{wifi["intf"]}" cannot be member of VRF '
- f'"{wifi["vrf"]}" and bridge {wifi["is_bridge_member"]} '
- f'at the same time!'))
+ if wifi['type'] == 'access-point':
+ if 'country_code' not in wifi:
+ raise ConfigError('Wireless regulatory domain is mandatory,\n' \
+ 'use "set system wifi-regulatory-domain" for configuration.')
+
+ if 'channel' not in wifi:
+ raise ConfigError('Wireless channel must be configured!')
+
+ if 'security' in wifi:
+ if {'wep', 'wpa'} <= set(wifi.get('security', {})):
+ raise ConfigError('Must either use WEP or WPA security!')
+
+ if 'wep' in wifi['security']:
+ if 'key' in wifi['security']['wep'] and len(wifi['security']['wep']) > 4:
+ raise ConfigError('No more then 4 WEP keys configurable')
+ elif 'key' not in wifi['security']['wep']:
+ raise ConfigError('Security WEP configured - missing WEP keys!')
+
+ elif 'wpa' in wifi['security']:
+ wpa = wifi['security']['wpa']
+ if not any(i in ['passphrase', 'radius'] for i in wpa):
+ raise ConfigError('Misssing WPA key or RADIUS server')
+
+ if 'radius' in wpa:
+ if 'server' in wpa['radius']:
+ for server in wpa['radius']['server']:
+ if 'key' not in wpa['radius']['server'][server]:
+ raise ConfigError(f'Misssing RADIUS shared secret key for server: {server}')
+
+ if 'capabilities' in wifi:
+ capabilities = wifi['capabilities']
+ if 'vht' in capabilities:
+ if 'ht' not in capabilities:
+ raise ConfigError('Specify HT flags if you want to use VHT!')
+
+ if {'beamform', 'antenna_count'} <= set(capabilities.get('vht', {})):
+ if capabilities['vht']['antenna_count'] == '1':
+ raise ConfigError('Cannot use beam forming with just one antenna!')
+
+ if capabilities['vht']['beamform'] == 'single-user-beamformer':
+ if int(capabilities['vht']['antenna_count']) < 3:
+ # Nasty Gotcha: see https://w1.fi/cgit/hostap/plain/hostapd/hostapd.conf lines 692-705
+ raise ConfigError('Single-user beam former requires at least 3 antennas!')
+
+ if 'station_interfaces' in wifi and wifi['type'] == 'station':
+ phy = wifi['physical_device']
+ if phy in wifi['station_interfaces']:
+ if len(wifi['station_interfaces'][phy]) > 0:
+ raise ConfigError('Only one station per wireless physical interface possible!')
+
+ verify_address(wifi)
+ verify_vrf(wifi)
# use common function to verify VLAN configuration
verify_vlan_config(wifi)
- conf = Config()
- # Only one wireless interface per phy can be in station mode
- base = ['interfaces', 'wireless']
- for phy in os.listdir('/sys/class/ieee80211'):
- stations = []
- for wlan in conf.list_nodes(base):
- # the following node is mandatory
- if conf.exists(base + [wlan, 'physical-device', phy]):
- tmp = conf.return_value(base + [wlan, 'type'])
- if tmp == 'station':
- stations.append(wlan)
-
- if len(stations) > 1:
- raise ConfigError('Only one station per wireless physical interface possible!')
-
return None
def generate(wifi):
- interface = wifi['intf']
+ interface = wifi['ifname']
# always stop hostapd service first before reconfiguring it
call(f'systemctl stop hostapd@{interface}.service')
@@ -513,7 +179,7 @@ def generate(wifi):
call(f'systemctl stop wpa_supplicant@{interface}.service')
# Delete config files if interface is removed
- if wifi['deleted']:
+ if 'deleted' in wifi:
if os.path.isfile(hostapd_conf.format(**wifi)):
os.unlink(hostapd_conf.format(**wifi))
@@ -522,10 +188,10 @@ def generate(wifi):
return None
- if not wifi['mac']:
+ if 'mac' not in wifi:
# http://wiki.stocksy.co.uk/wiki/Multiple_SSIDs_with_hostapd
# generate locally administered MAC address from used phy interface
- with open('/sys/class/ieee80211/{}/addresses'.format(wifi['phy']), 'r') as f:
+ with open('/sys/class/ieee80211/{physical_device}/addresses'.format(**wifi), 'r') as f:
# some PHYs tend to have multiple interfaces and thus supply multiple MAC
# addresses - we only need the first one for our calculation
tmp = f.readline().rstrip()
@@ -545,20 +211,18 @@ def generate(wifi):
wifi['mac'] = str(mac)
# render appropriate new config files depending on access-point or station mode
- if wifi['op_mode'] == 'ap':
- render(hostapd_conf.format(**wifi), 'wifi/hostapd.conf.tmpl', wifi)
+ if wifi['type'] == 'access-point':
+ render(hostapd_conf.format(**wifi), 'wifi/hostapd.conf.tmpl', wifi, trim_blocks=True)
- elif wifi['op_mode'] == 'station':
- render(wpa_suppl_conf.format(**wifi), 'wifi/wpa_supplicant.conf.tmpl', wifi)
+ elif wifi['type'] == 'station':
+ render(wpa_suppl_conf.format(**wifi), 'wifi/wpa_supplicant.conf.tmpl', wifi, trim_blocks=True)
return None
def apply(wifi):
- interface = wifi['intf']
- if wifi['deleted']:
- w = WiFiIf(interface)
- # delete interface
- w.remove()
+ interface = wifi['ifname']
+ if 'deleted' in wifi:
+ WiFiIf(interface).remove()
else:
# WiFi interface needs to be created on-block (e.g. mode or physical
# interface) instead of passing a ton of arguments, I just use a dict
@@ -566,97 +230,21 @@ def apply(wifi):
conf = deepcopy(WiFiIf.get_config())
# Assign WiFi instance configuration parameters to config dict
- conf['phy'] = wifi['phy']
+ conf['phy'] = wifi['physical_device']
# Finally create the new interface
w = WiFiIf(interface, **conf)
-
- # assign/remove VRF (ONLY when not a member of a bridge,
- # otherwise 'nomaster' removes it from it)
- if not wifi['is_bridge_member']:
- w.set_vrf(wifi['vrf'])
-
- # update interface description used e.g. within SNMP
- w.set_alias(wifi['description'])
-
- if wifi['dhcp_client_id']:
- w.dhcp.v4.options['client_id'] = wifi['dhcp_client_id']
-
- if wifi['dhcp_hostname']:
- w.dhcp.v4.options['hostname'] = wifi['dhcp_hostname']
-
- if wifi['dhcp_vendor_class_id']:
- w.dhcp.v4.options['vendor_class_id'] = wifi['dhcp_vendor_class_id']
-
- if wifi['dhcpv6_prm_only']:
- w.dhcp.v6.options['dhcpv6_prm_only'] = True
-
- if wifi['dhcpv6_temporary']:
- w.dhcp.v6.options['dhcpv6_temporary'] = True
-
- if wifi['dhcpv6_pd_length']:
- w.dhcp.v6.options['dhcpv6_pd_length'] = wifi['dhcpv6_pd_length']
-
- if wifi['dhcpv6_pd_interfaces']:
- w.dhcp.v6.options['dhcpv6_pd_interfaces'] = wifi['dhcpv6_pd_interfaces']
-
- # ignore link state changes
- w.set_link_detect(wifi['disable_link_detect'])
-
- # Delete old IPv6 EUI64 addresses before changing MAC
- for addr in wifi['ipv6_eui64_prefix_remove']:
- w.del_ipv6_eui64_address(addr)
-
- # Change interface MAC address - re-set to real hardware address (hw-id)
- # if custom mac is removed
- if wifi['mac']:
- w.set_mac(wifi['mac'])
- elif wifi['hw_id']:
- w.set_mac(wifi['hw_id'])
-
- # Add IPv6 EUI-based addresses
- for addr in wifi['ipv6_eui64_prefix']:
- w.add_ipv6_eui64_address(addr)
-
- # configure ARP filter configuration
- w.set_arp_filter(wifi['ip_disable_arp_filter'])
- # configure ARP accept
- w.set_arp_accept(wifi['ip_enable_arp_accept'])
- # configure ARP announce
- w.set_arp_announce(wifi['ip_enable_arp_announce'])
- # configure ARP ignore
- w.set_arp_ignore(wifi['ip_enable_arp_ignore'])
- # IPv6 accept RA
- w.set_ipv6_accept_ra(wifi['ipv6_accept_ra'])
- # IPv6 address autoconfiguration
- w.set_ipv6_autoconf(wifi['ipv6_autoconf'])
- # IPv6 forwarding
- w.set_ipv6_forwarding(wifi['ipv6_forwarding'])
- # IPv6 Duplicate Address Detection (DAD) tries
- w.set_ipv6_dad_messages(wifi['ipv6_dup_addr_detect'])
-
- # Configure interface address(es)
- # - not longer required addresses get removed first
- # - newly addresses will be added second
- for addr in wifi['address_remove']:
- w.del_addr(addr)
- for addr in wifi['address']:
- w.add_addr(addr)
-
- # apply all vlans to interface
- apply_all_vlans(w, wifi)
+ w.update(wifi)
# Enable/Disable interface - interface is always placed in
# administrative down state in WiFiIf class
- if not wifi['disable']:
- w.set_admin_state('up')
-
+ if 'disable' not in wifi:
# Physical interface is now configured. Proceed by starting hostapd or
# wpa_supplicant daemon. When type is monitor we can just skip this.
- if wifi['op_mode'] == 'ap':
+ if wifi['type'] == 'access-point':
call(f'systemctl start hostapd@{interface}.service')
- elif wifi['op_mode'] == 'station':
+ elif wifi['type'] == 'station':
call(f'systemctl start wpa_supplicant@{interface}.service')
return None
diff --git a/src/conf_mode/interfaces-wirelessmodem.py b/src/conf_mode/interfaces-wirelessmodem.py
index ec5a85e54..6d168d918 100755
--- a/src/conf_mode/interfaces-wirelessmodem.py
+++ b/src/conf_mode/interfaces-wirelessmodem.py
@@ -16,75 +16,39 @@
import os
-from fnmatch import fnmatch
from sys import exit
from vyos.config import Config
-from vyos.configdict import dict_merge
+from vyos.configdict import get_interface_dict
from vyos.configverify import verify_vrf
from vyos.template import render
from vyos.util import call
-from vyos.xml import defaults
+from vyos.util import check_kmod
+from vyos.util import find_device_file
from vyos import ConfigError
from vyos import airbag
airbag.enable()
-def check_kmod():
- modules = ['option', 'usb_wwan', 'usbserial']
- for module in modules:
- if not os.path.exists(f'/sys/module/{module}'):
- if call(f'modprobe {module}') != 0:
- raise ConfigError(f'Loading Kernel module {module} failed')
-
-def find_device_file(device):
- """ Recurively search /dev for the given device file and return its full path.
- If no device file was found 'None' is returned """
- for root, dirs, files in os.walk('/dev'):
- for basename in files:
- if fnmatch(basename, device):
- return os.path.join(root, basename)
-
- return None
+k_mod = ['option', 'usb_wwan', 'usbserial']
def get_config():
- """ Retrive CLI config as dictionary. Dictionary can never be empty,
- as at least the interface name will be added or a deleted flag """
+ """
+ Retrive CLI config as dictionary. Dictionary can never be empty, as at least the
+ interface name will be added or a deleted flag
+ """
conf = Config()
-
- # determine tagNode instance
- if 'VYOS_TAGNODE_VALUE' not in os.environ:
- raise ConfigError('Interface (VYOS_TAGNODE_VALUE) not specified')
-
- # retrieve interface default values
base = ['interfaces', 'wirelessmodem']
- default_values = defaults(base)
-
- ifname = os.environ['VYOS_TAGNODE_VALUE']
- base = base + [ifname]
-
- wwan = conf.get_config_dict(base, key_mangling=('-', '_'), get_first_key=True)
- # Check if interface has been removed
- if wwan == {}:
- wwan.update({'deleted' : ''})
-
- # We have gathered the dict representation of the CLI, but there are
- # default options which we need to update into the dictionary
- # retrived.
- wwan = dict_merge(default_values, wwan)
-
- # Add interface instance name into dictionary
- wwan.update({'ifname': ifname})
-
+ wwan = get_interface_dict(conf, base)
return wwan
def verify(wwan):
- if 'deleted' in wwan.keys():
+ if 'deleted' in wwan:
return None
- if not 'apn' in wwan.keys():
+ if not 'apn' in wwan:
raise ConfigError('No APN configured for "{ifname}"'.format(**wwan))
- if not 'device' in wwan.keys():
+ if not 'device' in wwan:
raise ConfigError('Physical "device" must be configured')
# we can not use isfile() here as Linux device files are no regular files
@@ -141,11 +105,11 @@ def generate(wwan):
return None
def apply(wwan):
- if 'deleted' in wwan.keys():
+ if 'deleted' in wwan:
# bail out early
return None
- if not 'disable' in wwan.keys():
+ if not 'disable' in wwan:
# "dial" WWAN connection
call('systemctl start ppp@{ifname}.service'.format(**wwan))
@@ -153,7 +117,7 @@ def apply(wwan):
if __name__ == '__main__':
try:
- check_kmod()
+ check_kmod(k_mod)
c = get_config()
verify(c)
generate(c)
diff --git a/src/conf_mode/nat.py b/src/conf_mode/nat.py
index 2299717a8..dd34dfd66 100755
--- a/src/conf_mode/nat.py
+++ b/src/conf_mode/nat.py
@@ -24,13 +24,17 @@ from netifaces import interfaces
from vyos.config import Config
from vyos.template import render
-from vyos.util import call, cmd
+from vyos.util import call
+from vyos.util import cmd
+from vyos.util import check_kmod
from vyos.validate import is_addr_assigned
from vyos import ConfigError
from vyos import airbag
airbag.enable()
+k_mod = ['nft_nat', 'nft_chain_nat_ipv4']
+
default_config_data = {
'deleted': False,
'destination': [],
@@ -44,15 +48,6 @@ default_config_data = {
iptables_nat_config = '/tmp/vyos-nat-rules.nft'
-def _check_kmod():
- """ load required Kernel modules """
- modules = ['nft_nat', 'nft_chain_nat_ipv4']
- for module in modules:
- if not os.path.exists(f'/sys/module/{module}'):
- if call(f'modprobe {module}') != 0:
- raise ConfigError(f'Loading Kernel module {module} failed')
-
-
def get_handler(json, chain, target):
""" Get nftable rule handler number of given chain/target combination.
Handler is required when adding NAT/Conntrack helper targets """
@@ -269,7 +264,7 @@ def apply(nat):
if __name__ == '__main__':
try:
- _check_kmod()
+ check_kmod(k_mod)
c = get_config()
verify(c)
generate(c)
diff --git a/src/conf_mode/service_console-server.py b/src/conf_mode/service_console-server.py
index ace6b8ca4..613ec6879 100755
--- a/src/conf_mode/service_console-server.py
+++ b/src/conf_mode/service_console-server.py
@@ -31,11 +31,9 @@ def get_config():
conf = Config()
base = ['service', 'console-server']
- if not conf.exists(base):
- return None
-
# Retrieve CLI representation as dictionary
- proxy = conf.get_config_dict(base, key_mangling=('-', '_'))
+ proxy = conf.get_config_dict(base, key_mangling=('-', '_'),
+ get_first_key=True)
# The retrieved dictionary will look something like this:
#
# {'device': {'usb0b2.4p1.0': {'speed': '9600'},
@@ -47,9 +45,10 @@ def get_config():
# We have gathered the dict representation of the CLI, but there are default
# options which we need to update into the dictionary retrived.
default_values = defaults(base + ['device'])
- for device in proxy['device'].keys():
- tmp = dict_merge(default_values, proxy['device'][device])
- proxy['device'][device] = tmp
+ if 'device' in proxy:
+ for device in proxy['device']:
+ tmp = dict_merge(default_values, proxy['device'][device])
+ proxy['device'][device] = tmp
return proxy
@@ -57,15 +56,14 @@ def verify(proxy):
if not proxy:
return None
- for device in proxy['device']:
- keys = proxy['device'][device].keys()
- if 'speed' not in keys:
- raise ConfigError(f'Serial port speed must be defined for "{tmp}"!')
+ if 'device' in proxy:
+ for device in proxy['device']:
+ if 'speed' not in proxy['device'][device]:
+ raise ConfigError(f'Serial port speed must be defined for "{device}"!')
- if 'ssh' in keys:
- ssh_keys = proxy['device'][device]['ssh'].keys()
- if 'port' not in ssh_keys:
- raise ConfigError(f'SSH port must be defined for "{tmp}"!')
+ if 'ssh' in proxy['device'][device]:
+ if 'port' not in proxy['device'][device]['ssh']:
+ raise ConfigError(f'SSH port must be defined for "{device}"!')
return None
@@ -86,10 +84,11 @@ def apply(proxy):
call('systemctl restart conserver-server.service')
- for device in proxy['device']:
- if 'ssh' in proxy['device'][device].keys():
- port = proxy['device'][device]['ssh']['port']
- call(f'systemctl restart dropbear@{device}.service')
+ if 'device' in proxy:
+ for device in proxy['device']:
+ if 'ssh' in proxy['device'][device]:
+ port = proxy['device'][device]['ssh']['port']
+ call(f'systemctl restart dropbear@{device}.service')
return None
diff --git a/src/conf_mode/service_ipoe-server.py b/src/conf_mode/service_ipoe-server.py
index b539da98e..553cc2e97 100755
--- a/src/conf_mode/service_ipoe-server.py
+++ b/src/conf_mode/service_ipoe-server.py
@@ -147,17 +147,21 @@ def get_config():
'server' : server,
'key' : '',
'fail_time' : 0,
- 'port' : '1812'
+ 'port' : '1812',
+ 'acct_port' : '1813'
}
conf.set_level(base_path + ['authentication', 'radius', 'server', server])
if conf.exists(['fail-time']):
- radius['fail-time'] = conf.return_value(['fail-time'])
+ radius['fail_time'] = conf.return_value(['fail-time'])
if conf.exists(['port']):
radius['port'] = conf.return_value(['port'])
+ if conf.exists(['acct-port']):
+ radius['acct_port'] = conf.return_value(['acct-port'])
+
if conf.exists(['key']):
radius['key'] = conf.return_value(['key'])
diff --git a/src/conf_mode/mdns_repeater.py b/src/conf_mode/service_mdns-repeater.py
index b43f9bdd8..1a6b2c328 100755
--- a/src/conf_mode/mdns_repeater.py
+++ b/src/conf_mode/service_mdns-repeater.py
@@ -17,69 +17,51 @@
import os
from sys import exit
-from copy import deepcopy
-from netifaces import ifaddresses, AF_INET
+from netifaces import ifaddresses, interfaces, AF_INET
from vyos.config import Config
-from vyos import ConfigError
-from vyos.util import call
from vyos.template import render
-
+from vyos.util import call
+from vyos import ConfigError
from vyos import airbag
airbag.enable()
config_file = r'/etc/default/mdns-repeater'
-default_config_data = {
- 'disabled': False,
- 'interfaces': []
-}
-
def get_config():
- mdns = deepcopy(default_config_data)
conf = Config()
base = ['service', 'mdns', 'repeater']
- if not conf.exists(base):
- return None
- else:
- conf.set_level(base)
-
- # Service can be disabled by user
- if conf.exists(['disable']):
- mdns['disabled'] = True
- return mdns
-
- # Interface to repeat mDNS advertisements
- if conf.exists(['interface']):
- mdns['interfaces'] = conf.return_values(['interface'])
-
+ mdns = conf.get_config_dict(base, key_mangling=('-', '_'), get_first_key=True)
return mdns
def verify(mdns):
- if mdns is None:
+ if not mdns:
return None
- if mdns['disabled']:
+ if 'disable' in mdns:
return None
# We need at least two interfaces to repeat mDNS advertisments
- if len(mdns['interfaces']) < 2:
+ if 'interface' not in mdns or len(mdns['interface']) < 2:
raise ConfigError('mDNS repeater requires at least 2 configured interfaces!')
# For mdns-repeater to work it is essential that the interfaces has
# an IPv4 address assigned
- for interface in mdns['interfaces']:
- if AF_INET in ifaddresses(interface).keys():
- if len(ifaddresses(interface)[AF_INET]) < 1:
- raise ConfigError('mDNS repeater requires an IPv6 address configured on interface %s!'.format(interface))
+ for interface in mdns['interface']:
+ if interface not in interfaces():
+ raise ConfigError(f'Interface "{interface}" does not exist!')
+
+ if AF_INET not in ifaddresses(interface):
+ raise ConfigError('mDNS repeater requires an IPv4 address to be '
+ f'configured on interface "{interface}"')
return None
def generate(mdns):
- if mdns is None:
+ if not mdns:
return None
- if mdns['disabled']:
+ if 'disable' in mdns:
print('Warning: mDNS repeater will be deactivated because it is disabled')
return None
@@ -87,7 +69,7 @@ def generate(mdns):
return None
def apply(mdns):
- if (mdns is None) or mdns['disabled']:
+ if not mdns or 'disable' in mdns:
call('systemctl stop mdns-repeater.service')
if os.path.exists(config_file):
os.unlink(config_file)
diff --git a/src/conf_mode/service_pppoe-server.py b/src/conf_mode/service_pppoe-server.py
index 3149bbb2f..39d34a7e2 100755
--- a/src/conf_mode/service_pppoe-server.py
+++ b/src/conf_mode/service_pppoe-server.py
@@ -242,7 +242,8 @@ def get_config():
'server' : server,
'key' : '',
'fail_time' : 0,
- 'port' : '1812'
+ 'port' : '1812',
+ 'acct_port' : '1813'
}
conf.set_level(base_path + ['authentication', 'radius', 'server', server])
@@ -253,6 +254,9 @@ def get_config():
if conf.exists(['port']):
radius['port'] = conf.return_value(['port'])
+ if conf.exists(['acct-port']):
+ radius['acct_port'] = conf.return_value(['acct-port'])
+
if conf.exists(['key']):
radius['key'] = conf.return_value(['key'])
@@ -417,6 +421,9 @@ def verify(pppoe):
if len(pppoe['dnsv6']) > 3:
raise ConfigError('Not more then three IPv6 DNS name-servers can be configured')
+ if not pppoe['interfaces']:
+ raise ConfigError('At least one listen interface must be defined!')
+
# local ippool and gateway settings config checks
if pppoe['client_ip_subnets'] or pppoe['client_ip_pool']:
if not pppoe['ppp_gw']:
diff --git a/src/conf_mode/service_router-advert.py b/src/conf_mode/service_router-advert.py
index ef6148ebd..4e1c432ab 100755
--- a/src/conf_mode/service_router-advert.py
+++ b/src/conf_mode/service_router-advert.py
@@ -16,145 +16,85 @@
import os
-from stat import S_IRUSR, S_IWUSR, S_IRGRP
from sys import exit
from vyos.config import Config
-from vyos import ConfigError
-from vyos.util import call
+from vyos.configdict import dict_merge
from vyos.template import render
-
+from vyos.util import call
+from vyos.xml import defaults
+from vyos import ConfigError
from vyos import airbag
airbag.enable()
config_file = r'/run/radvd/radvd.conf'
-default_config_data = {
- 'interfaces': []
-}
-
def get_config():
- rtradv = default_config_data
conf = Config()
- base_level = ['service', 'router-advert']
-
- if not conf.exists(base_level):
- return rtradv
-
- for interface in conf.list_nodes(base_level + ['interface']):
- intf = {
- 'name': interface,
- 'hop_limit' : '64',
- 'default_lifetime': '',
- 'default_preference': 'medium',
- 'dnssl': [],
- 'link_mtu': '',
- 'managed_flag': 'off',
- 'interval_max': '600',
- 'interval_min': '',
- 'name_server': [],
- 'other_config_flag': 'off',
- 'prefixes' : [],
- 'reachable_time': '0',
- 'retrans_timer': '0',
- 'send_advert': 'on'
- }
-
- # set config level first to reduce boilerplate code
- conf.set_level(base_level + ['interface', interface])
-
- if conf.exists(['hop-limit']):
- intf['hop_limit'] = conf.return_value(['hop-limit'])
-
- if conf.exists(['default-lifetime']):
- intf['default_lifetime'] = conf.return_value(['default-lifetime'])
-
- if conf.exists(['default-preference']):
- intf['default_preference'] = conf.return_value(['default-preference'])
-
- if conf.exists(['dnssl']):
- intf['dnssl'] = conf.return_values(['dnssl'])
-
- if conf.exists(['link-mtu']):
- intf['link_mtu'] = conf.return_value(['link-mtu'])
-
- if conf.exists(['managed-flag']):
- intf['managed_flag'] = 'on'
-
- if conf.exists(['interval', 'max']):
- intf['interval_max'] = conf.return_value(['interval', 'max'])
-
- if conf.exists(['interval', 'min']):
- intf['interval_min'] = conf.return_value(['interval', 'min'])
-
- if conf.exists(['name-server']):
- intf['name_server'] = conf.return_values(['name-server'])
+ base = ['service', 'router-advert']
+ rtradv = conf.get_config_dict(base, key_mangling=('-', '_'), get_first_key=True)
+
+ # We have gathered the dict representation of the CLI, but there are default
+ # options which we need to update into the dictionary retrived.
+ default_interface_values = defaults(base + ['interface'])
+ # we deal with prefix defaults later on
+ if 'prefix' in default_interface_values:
+ del default_interface_values['prefix']
+
+ default_prefix_values = defaults(base + ['interface', 'prefix'])
+
+ if 'interface' in rtradv:
+ for interface in rtradv['interface']:
+ rtradv['interface'][interface] = dict_merge(
+ default_interface_values, rtradv['interface'][interface])
+
+ if 'prefix' in rtradv['interface'][interface]:
+ for prefix in rtradv['interface'][interface]['prefix']:
+ rtradv['interface'][interface]['prefix'][prefix] = dict_merge(
+ default_prefix_values, rtradv['interface'][interface]['prefix'][prefix])
+
+ if 'name_server' in rtradv['interface'][interface]:
+ # always use a list when dealing with nameservers - eases the template generation
+ if isinstance(rtradv['interface'][interface]['name_server'], str):
+ rtradv['interface'][interface]['name_server'] = [
+ rtradv['interface'][interface]['name_server']]
- if conf.exists(['other-config-flag']):
- intf['other_config_flag'] = 'on'
-
- if conf.exists(['reachable-time']):
- intf['reachable_time'] = conf.return_value(['reachable-time'])
-
- if conf.exists(['retrans-timer']):
- intf['retrans_timer'] = conf.return_value(['retrans-timer'])
-
- if conf.exists(['no-send-advert']):
- intf['send_advert'] = 'off'
-
- for prefix in conf.list_nodes(['prefix']):
- tmp = {
- 'prefix' : prefix,
- 'autonomous_flag' : 'on',
- 'on_link' : 'on',
- 'preferred_lifetime': 14400,
- 'valid_lifetime' : 2592000
-
- }
-
- # set config level first to reduce boilerplate code
- conf.set_level(base_level + ['interface', interface, 'prefix', prefix])
-
- if conf.exists(['no-autonomous-flag']):
- tmp['autonomous_flag'] = 'off'
-
- if conf.exists(['no-on-link-flag']):
- tmp['on_link'] = 'off'
-
- if conf.exists(['preferred-lifetime']):
- tmp['preferred_lifetime'] = int(conf.return_value(['preferred-lifetime']))
+ return rtradv
- if conf.exists(['valid-lifetime']):
- tmp['valid_lifetime'] = int(conf.return_value(['valid-lifetime']))
+def verify(rtradv):
+ if not rtradv:
+ return None
- intf['prefixes'].append(tmp)
+ if 'interface' not in rtradv:
+ return None
- rtradv['interfaces'].append(intf)
+ for interface in rtradv['interface']:
+ interface = rtradv['interface'][interface]
+ if 'prefix' in interface:
+ for prefix in interface['prefix']:
+ prefix = interface['prefix'][prefix]
+ valid_lifetime = prefix['valid_lifetime']
+ if valid_lifetime == 'infinity':
+ valid_lifetime = 4294967295
- return rtradv
+ preferred_lifetime = prefix['preferred_lifetime']
+ if preferred_lifetime == 'infinity':
+ preferred_lifetime = 4294967295
-def verify(rtradv):
- for interface in rtradv['interfaces']:
- for prefix in interface['prefixes']:
- if not (prefix['valid_lifetime'] > prefix['preferred_lifetime']):
- raise ConfigError('Prefix valid-lifetime must be greater then preferred-lifetime')
+ if not (int(valid_lifetime) > int(preferred_lifetime)):
+ raise ConfigError('Prefix valid-lifetime must be greater then preferred-lifetime')
return None
def generate(rtradv):
- if not rtradv['interfaces']:
+ if not rtradv:
return None
- render(config_file, 'router-advert/radvd.conf.tmpl', rtradv, trim_blocks=True)
-
- # adjust file permissions of new configuration file
- if os.path.exists(config_file):
- os.chmod(config_file, S_IRUSR | S_IWUSR | S_IRGRP)
-
+ render(config_file, 'router-advert/radvd.conf.tmpl', rtradv, trim_blocks=True, permission=0o644)
return None
def apply(rtradv):
- if not rtradv['interfaces']:
+ if not rtradv:
# bail out early - looks like removal from running config
call('systemctl stop radvd.service')
if os.path.exists(config_file):
@@ -163,6 +103,7 @@ def apply(rtradv):
return None
call('systemctl restart radvd.service')
+
return None
if __name__ == '__main__':
diff --git a/src/conf_mode/ssh.py b/src/conf_mode/ssh.py
index ffb0b700d..7b262565a 100755
--- a/src/conf_mode/ssh.py
+++ b/src/conf_mode/ssh.py
@@ -28,7 +28,7 @@ from vyos.xml import defaults
from vyos import airbag
airbag.enable()
-config_file = r'/etc/ssh/sshd_config'
+config_file = r'/run/ssh/sshd_config'
systemd_override = r'/etc/systemd/system/ssh.service.d/override.conf'
def get_config():
@@ -42,6 +42,8 @@ def get_config():
# options which we need to update into the dictionary retrived.
default_values = defaults(base)
ssh = dict_merge(default_values, ssh)
+ # pass config file path - used in override template
+ ssh['config_file'] = config_file
return ssh
diff --git a/src/conf_mode/system-login.py b/src/conf_mode/system-login.py
index 93d4cc679..b1dd583b5 100755
--- a/src/conf_mode/system-login.py
+++ b/src/conf_mode/system-login.py
@@ -72,7 +72,7 @@ def get_config():
user = {
'name': username,
'password_plaintext': '',
- 'password_encred': '!',
+ 'password_encrypted': '!',
'public_keys': [],
'full_name': '',
'home_dir': '/home/' + username,
diff --git a/src/conf_mode/system-options.py b/src/conf_mode/system-options.py
index d7c5c0443..0aacd19d8 100755
--- a/src/conf_mode/system-options.py
+++ b/src/conf_mode/system-options.py
@@ -22,11 +22,13 @@ from sys import exit
from vyos.config import Config
from vyos.template import render
from vyos.util import call
+from vyos.validate import is_addr_assigned
from vyos import ConfigError
from vyos import airbag
airbag.enable()
-config_file = r'/etc/curlrc'
+curlrc_config = r'/etc/curlrc'
+ssh_config = r'/etc/ssh/ssh_config'
systemd_action_file = '/lib/systemd/system/ctrl-alt-del.target'
def get_config():
@@ -36,9 +38,9 @@ def get_config():
return options
def verify(options):
- if 'http_client' in options.keys():
+ if 'http_client' in options:
config = options['http_client']
- if 'source_interface' in config.keys():
+ if 'source_interface' in config:
if not config['source_interface'] in interfaces():
raise ConfigError(f'Source interface {source_interface} does not '
f'exist'.format(**config))
@@ -46,10 +48,21 @@ def verify(options):
if {'source_address', 'source_interface'} <= set(config):
raise ConfigError('Can not define both HTTP source-interface and source-address')
+ if 'source_address' in config:
+ if not is_addr_assigned(config['source_address']):
+ raise ConfigError('No interface with give address specified!')
+
+ if 'ssh_client' in options:
+ config = options['ssh_client']
+ if 'source_address' in config:
+ if not is_addr_assigned(config['source_address']):
+ raise ConfigError('No interface with give address specified!')
+
return None
def generate(options):
- render(config_file, 'system/curlrc.tmpl', options, trim_blocks=True)
+ render(curlrc_config, 'system/curlrc.tmpl', options, trim_blocks=True)
+ render(ssh_config, 'system/ssh_config.tmpl', options, trim_blocks=True)
return None
def apply(options):
@@ -63,12 +76,20 @@ def apply(options):
if os.path.exists(systemd_action_file):
os.unlink(systemd_action_file)
- if 'ctrl_alt_del_action' in options.keys():
+ if 'ctrl_alt_del_action' in options:
if options['ctrl_alt_del_action'] == 'reboot':
os.symlink('/lib/systemd/system/reboot.target', systemd_action_file)
elif options['ctrl_alt_del_action'] == 'poweroff':
os.symlink('/lib/systemd/system/poweroff.target', systemd_action_file)
+ if 'http_client' not in options:
+ if os.path.exists(curlrc_config):
+ os.unlink(curlrc_config)
+
+ if 'ssh_client' not in options:
+ if os.path.exists(ssh_config):
+ os.unlink(ssh_config)
+
# Reboot system on kernel panic
with open('/proc/sys/kernel/panic', 'w') as f:
if 'reboot_on_panic' in options.keys():
diff --git a/src/conf_mode/system_lcd.py b/src/conf_mode/system_lcd.py
new file mode 100755
index 000000000..0ad1318f0
--- /dev/null
+++ b/src/conf_mode/system_lcd.py
@@ -0,0 +1,84 @@
+#!/usr/bin/env python3
+#
+# Copyright 2020 VyOS maintainers and contributors <maintainers@vyos.io>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 or later as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+import os
+
+from sys import exit
+
+from vyos.config import Config
+from vyos.util import call
+from vyos.util import find_device_file
+from vyos.template import render
+from vyos import ConfigError
+from vyos import airbag
+airbag.enable()
+
+lcdd_conf = '/run/LCDd/LCDd.conf'
+lcdproc_conf = '/run/lcdproc/lcdproc.conf'
+
+def get_config():
+ conf = Config()
+ base = ['system', 'lcd']
+ lcd = conf.get_config_dict(base, key_mangling=('-', '_'),
+ get_first_key=True)
+ # Return (possibly empty) dictionary
+ return lcd
+
+def verify(lcd):
+ if not lcd:
+ return None
+
+ if not {'device', 'model'} <= set(lcd):
+ raise ConfigError('Both device and driver must be set!')
+
+ return None
+
+def generate(lcd):
+ if not lcd:
+ return None
+
+ if 'device' in lcd:
+ lcd['device'] = find_device_file(lcd['device'])
+
+ # Render config file for daemon LCDd
+ render(lcdd_conf, 'lcd/LCDd.conf.tmpl', lcd, trim_blocks=True)
+ # Render config file for client lcdproc
+ render(lcdproc_conf, 'lcd/lcdproc.conf.tmpl', lcd, trim_blocks=True)
+
+ return None
+
+def apply(lcd):
+ if not lcd:
+ call('systemctl stop lcdproc.service LCDd.service')
+
+ for file in [lcdd_conf, lcdproc_conf]:
+ if os.path.exists(file):
+ os.remove(file)
+ else:
+ # Restart server
+ call('systemctl restart LCDd.service lcdproc.service')
+
+ return None
+
+if __name__ == '__main__':
+ try:
+ config_dict = get_config()
+ verify(config_dict)
+ generate(config_dict)
+ apply(config_dict)
+ except ConfigError as e:
+ print(e)
+ exit(1)
diff --git a/src/conf_mode/vpn_l2tp.py b/src/conf_mode/vpn_l2tp.py
index 88df2902e..26ad1af84 100755
--- a/src/conf_mode/vpn_l2tp.py
+++ b/src/conf_mode/vpn_l2tp.py
@@ -151,7 +151,8 @@ def get_config():
'server' : server,
'key' : '',
'fail_time' : 0,
- 'port' : '1812'
+ 'port' : '1812',
+ 'acct_port' : '1813'
}
conf.set_level(base_path + ['authentication', 'radius', 'server', server])
@@ -162,6 +163,9 @@ def get_config():
if conf.exists(['port']):
radius['port'] = conf.return_value(['port'])
+ if conf.exists(['acct-port']):
+ radius['acct_port'] = conf.return_value(['acct-port'])
+
if conf.exists(['key']):
radius['key'] = conf.return_value(['key'])
diff --git a/src/conf_mode/vpn_pptp.py b/src/conf_mode/vpn_pptp.py
index 4536692d2..32cbadd74 100755
--- a/src/conf_mode/vpn_pptp.py
+++ b/src/conf_mode/vpn_pptp.py
@@ -111,7 +111,8 @@ def get_config():
'server' : server,
'key' : '',
'fail_time' : 0,
- 'port' : '1812'
+ 'port' : '1812',
+ 'acct_port' : '1813'
}
conf.set_level(base_path + ['authentication', 'radius', 'server', server])
@@ -122,6 +123,9 @@ def get_config():
if conf.exists(['port']):
radius['port'] = conf.return_value(['port'])
+ if conf.exists(['acct-port']):
+ radius['acct_port'] = conf.return_value(['acct-port'])
+
if conf.exists(['key']):
radius['key'] = conf.return_value(['key'])
diff --git a/src/conf_mode/vpn_sstp.py b/src/conf_mode/vpn_sstp.py
index 4c4d8e403..ddb499bf4 100755
--- a/src/conf_mode/vpn_sstp.py
+++ b/src/conf_mode/vpn_sstp.py
@@ -118,7 +118,8 @@ def get_config():
'server' : server,
'key' : '',
'fail_time' : 0,
- 'port' : '1812'
+ 'port' : '1812',
+ 'acct_port' : '1813'
}
conf.set_level(base_path + ['authentication', 'radius', 'server', server])
@@ -129,6 +130,9 @@ def get_config():
if conf.exists(['port']):
radius['port'] = conf.return_value(['port'])
+ if conf.exists(['acct-port']):
+ radius['acct_port'] = conf.return_value(['acct-port'])
+
if conf.exists(['key']):
radius['key'] = conf.return_value(['key'])
diff --git a/src/etc/dhcp/dhclient-enter-hooks.d/03-vyos-ipwrapper b/src/etc/dhcp/dhclient-enter-hooks.d/03-vyos-ipwrapper
index f1167fcd2..d1161e704 100644
--- a/src/etc/dhcp/dhclient-enter-hooks.d/03-vyos-ipwrapper
+++ b/src/etc/dhcp/dhclient-enter-hooks.d/03-vyos-ipwrapper
@@ -40,7 +40,14 @@ function iptovtysh () {
elif [ "$7" == "dev" ]; then
VTYSH_DEV=$8
fi
- VTYSH_CMD="ip route $VTYSH_NETADDR $VTYSH_GATEWAY $VTYSH_DEV tag $VTYSH_TAG $VTYSH_DISTANCE"
+
+ # Add route to VRF routing table
+ local VTYSH_VRF_NAME=$(basename /sys/class/net/$VTYSH_DEV/upper_* | sed -e 's/upper_//')
+ if [ -n $VTYSH_VRF_NAME ]; then
+ VTYSH_VRF="vrf $VTYSH_VRF_NAME"
+ fi
+ VTYSH_CMD="ip route $VTYSH_NETADDR $VTYSH_GATEWAY $VTYSH_DEV tag $VTYSH_TAG $VTYSH_DISTANCE $VTYSH_VRF"
+
# delete route if the command is "del"
if [ "$3" == "del" ] ; then
VTYSH_CMD="no $VTYSH_CMD"
diff --git a/src/etc/dhcp/dhclient-exit-hooks.d/01-vyos-cleanup b/src/etc/dhcp/dhclient-exit-hooks.d/01-vyos-cleanup
index 01981ad04..b768e1ae5 100644
--- a/src/etc/dhcp/dhclient-exit-hooks.d/01-vyos-cleanup
+++ b/src/etc/dhcp/dhclient-exit-hooks.d/01-vyos-cleanup
@@ -15,8 +15,14 @@ if [[ $reason =~ (EXPIRE|FAIL|RELEASE|STOP) ]]; then
# try to delete default ip route
for router in $old_routers; do
- logmsg info "Deleting default route: via $router dev ${interface}"
- ip -4 route del default via $router dev ${interface}
+ # check if we are bound to a VRF
+ local vrf_name=$(basename /sys/class/net/${interface}/upper_* | sed -e 's/upper_//')
+ if [ -n $vrf_name ]; then
+ vrf="vrf $vrf_name"
+ fi
+
+ logmsg info "Deleting default route: via $router dev ${interface} ${vrf}"
+ ip -4 route del default via $router dev ${interface} ${vrf}
done
# delete rfc3442 routes
diff --git a/src/etc/systemd/system/LCDd.service.d/override.conf b/src/etc/systemd/system/LCDd.service.d/override.conf
new file mode 100644
index 000000000..5f3f0dc95
--- /dev/null
+++ b/src/etc/systemd/system/LCDd.service.d/override.conf
@@ -0,0 +1,8 @@
+[Unit]
+After=
+After=vyos-router.service
+
+[Service]
+ExecStart=
+ExecStart=/usr/sbin/LCDd -c /run/LCDd/LCDd.conf
+
diff --git a/src/etc/systemd/system/hostapd@.service.d/override.conf b/src/etc/systemd/system/hostapd@.service.d/override.conf
index bb8e81d7a..b03dbc299 100644
--- a/src/etc/systemd/system/hostapd@.service.d/override.conf
+++ b/src/etc/systemd/system/hostapd@.service.d/override.conf
@@ -3,8 +3,7 @@ After=
After=vyos-router.service
[Service]
-WorkingDirectory=/run/hostapd
-EnvironmentFile=
+WorkingDirectory=/run/LCDd
ExecStart=
-ExecStart=/usr/sbin/hostapd -B -P /run/hostapd/%i.pid /run/hostapd/%i.conf
-PIDFile=/run/hostapd/%i.pid
+ExecStart=/usr/sbin/LCDd -s 1 -f -c /run/LCDd/LCDd.conf
+
diff --git a/src/etc/systemd/system/radvd.service.d/override.conf b/src/etc/systemd/system/radvd.service.d/override.conf
index 44c4345e1..c2f640cf5 100644
--- a/src/etc/systemd/system/radvd.service.d/override.conf
+++ b/src/etc/systemd/system/radvd.service.d/override.conf
@@ -1,17 +1,17 @@
-[Unit]
-ConditionPathExists=/run/radvd/radvd.conf
-After=
-After=vyos-router.service
-
-[Service]
-WorkingDirectory=
-WorkingDirectory=/run/radvd
-ExecStartPre=
-ExecStartPre=/usr/sbin/radvd --logmethod stderr_clean --configtest --config /run/radvd/radvd.conf
-ExecStart=
-ExecStart=/usr/sbin/radvd --logmethod stderr_clean --config /run/radvd/radvd.conf --pidfile /run/radvd/radvd.pid
-ExecReload=
-ExecReload=/usr/sbin/radvd --logmethod stderr_clean --configtest --config /run/radvd/radvd.conf
-ExecReload=/bin/kill -HUP $MAINPID
-PIDFile=
-PIDFile=/run/radvd/radvd.pid
+[Unit]
+ConditionPathExists=/run/radvd/radvd.conf
+After=
+After=vyos-router.service
+
+[Service]
+WorkingDirectory=
+WorkingDirectory=/run/radvd
+ExecStartPre=
+ExecStartPre=/usr/sbin/radvd --logmethod stderr_clean --configtest --config /run/radvd/radvd.conf
+ExecStart=
+ExecStart=/usr/sbin/radvd --logmethod stderr_clean --config /run/radvd/radvd.conf --pidfile /run/radvd/radvd.pid
+ExecReload=
+ExecReload=/usr/sbin/radvd --logmethod stderr_clean --configtest --config /run/radvd/radvd.conf
+ExecReload=/bin/kill -HUP $MAINPID
+PIDFile=
+PIDFile=/run/radvd/radvd.pid
diff --git a/src/helpers/vyos-load-config.py b/src/helpers/vyos-load-config.py
index a9fa15778..c2da1bb11 100755
--- a/src/helpers/vyos-load-config.py
+++ b/src/helpers/vyos-load-config.py
@@ -27,12 +27,12 @@ import sys
import tempfile
import vyos.defaults
import vyos.remote
-from vyos.config import Config, VyOSError
+from vyos.configsource import ConfigSourceSession, VyOSError
from vyos.migrator import Migrator, VirtualMigrator, MigratorError
-class LoadConfig(Config):
+class LoadConfig(ConfigSourceSession):
"""A subclass for calling 'loadFile'.
- This does not belong in config.py, and only has a single caller.
+ This does not belong in configsource.py, and only has a single caller.
"""
def load_config(self, path):
return self._run(['/bin/cli-shell-api','loadFile',path])
diff --git a/src/migration-scripts/interfaces/7-to-8 b/src/migration-scripts/interfaces/7-to-8
index 8830ffdc7..a4051301f 100755
--- a/src/migration-scripts/interfaces/7-to-8
+++ b/src/migration-scripts/interfaces/7-to-8
@@ -17,8 +17,23 @@
# Split WireGuard endpoint into address / port nodes to make use of common
# validators
+import os
+
from sys import exit, argv
from vyos.configtree import ConfigTree
+from vyos.util import chown, chmod_750
+
+def migrate_default_keys():
+ kdir = r'/config/auth/wireguard'
+ if os.path.exists(f'{kdir}/private.key') and not os.path.exists(f'{kdir}/default/private.key'):
+ location = f'{kdir}/default'
+ if not os.path.exists(location):
+ os.makedirs(location)
+
+ chown(location, 'root', 'vyattacfg')
+ chmod_750(location)
+ os.rename(f'{kdir}/private.key', f'{location}/private.key')
+ os.rename(f'{kdir}/public.key', f'{location}/public.key')
if __name__ == '__main__':
if (len(argv) < 1):
@@ -32,6 +47,8 @@ if __name__ == '__main__':
config = ConfigTree(config_file)
base = ['interfaces', 'wireguard']
+ migrate_default_keys()
+
if not config.exists(base):
# Nothing to do
exit(0)
diff --git a/src/op_mode/lldp_op.py b/src/op_mode/lldp_op.py
index 5d48e3210..0df6749aa 100755
--- a/src/op_mode/lldp_op.py
+++ b/src/op_mode/lldp_op.py
@@ -14,19 +14,19 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
import argparse
import jinja2
-from xml.dom import minidom
from sys import exit
from tabulate import tabulate
+from xml.dom import minidom
-from vyos.util import popen
+from vyos.util import cmd
from vyos.config import Config
parser = argparse.ArgumentParser()
parser.add_argument("-a", "--all", action="store_true", help="Show LLDP neighbors on all interfaces")
+parser.add_argument("-d", "--detail", action="store_true", help="Show detailes LLDP neighbor information on all interfaces")
parser.add_argument("-i", "--interface", action="store", help="Show LLDP neighbors on specific interface")
# Please be careful if you edit the template.
@@ -40,10 +40,8 @@ Device ID Local Proto Cap Platform Port ID
{% endfor -%}
"""
-def _get_neighbors():
- command = '/usr/sbin/lldpcli -f xml show neighbors'
- out,_ = popen(command)
- return out
+def get_neighbors():
+ return cmd('/usr/sbin/lldpcli -f xml show neighbors')
def extract_neighbor(neighbor):
"""
@@ -148,12 +146,17 @@ if __name__ == '__main__':
exit(0)
if args.all:
- neighbors = minidom.parseString(_get_neighbors())
+ neighbors = minidom.parseString(get_neighbors())
for neighbor in neighbors.getElementsByTagName('interface'):
tmp['neighbors'].append( extract_neighbor(neighbor) )
+ elif args.detail:
+ out = cmd('/usr/sbin/lldpctl -f plain')
+ print(out)
+ exit(0)
+
elif args.interface:
- neighbors = minidom.parseString(_get_neighbors())
+ neighbors = minidom.parseString(get_neighbors())
for neighbor in neighbors.getElementsByTagName('interface'):
# check if neighbor appeared on proper interface
if neighbor.getAttribute('name') == args.interface:
diff --git a/src/op_mode/ping.py b/src/op_mode/ping.py
index e56952c38..29b430d53 100755
--- a/src/op_mode/ping.py
+++ b/src/op_mode/ping.py
@@ -118,7 +118,8 @@ options = {
'vrf': {
'ping': 'sudo ip vrf exec {value} {command}',
'type': '<vrf>',
- 'help': 'Use specified VRF table'
+ 'help': 'Use specified VRF table',
+ 'dflt': 'default',
},
'verbose': {
'ping': '{command} -v',
@@ -207,6 +208,11 @@ if __name__ == '__main__':
sys.stdout.write(options[matched[0]]['type'])
sys.exit(0)
+ for name,option in options.items():
+ if 'dflt' in option and name not in args:
+ args.append(name)
+ args.append(option['dflt'])
+
try:
ip = socket.gethostbyname(host)
except socket.gaierror:
diff --git a/src/op_mode/show_interfaces.py b/src/op_mode/show_interfaces.py
index 46571c0c0..d4dae3cd1 100755
--- a/src/op_mode/show_interfaces.py
+++ b/src/op_mode/show_interfaces.py
@@ -220,8 +220,7 @@ def run_show_intf_brief(ifnames, iftypes, vif, vrrp):
oper = ['u', ] if oper_state in ('up', 'unknown') else ['A', ]
admin = ['u', ] if oper_state in ('up', 'unknown') else ['D', ]
addrs = [_ for _ in interface.get_addr() if not _.startswith('fe80::')] or ['-', ]
- # do not ask me why 56, it was the number in the perl code ...
- descs = list(split_text(interface.get_alias(),56))
+ descs = list(split_text(interface.get_alias(),0))
while intf or oper or admin or addrs or descs:
i = intf.pop(0) if intf else ''
diff --git a/src/op_mode/wireguard.py b/src/op_mode/wireguard.py
index 15bf63e81..e08bc983a 100755
--- a/src/op_mode/wireguard.py
+++ b/src/op_mode/wireguard.py
@@ -21,22 +21,17 @@ import shutil
import syslog as sl
import re
+from vyos.config import Config
from vyos.ifconfig import WireGuardIf
-
+from vyos.util import cmd
+from vyos.util import run
+from vyos.util import check_kmod
from vyos import ConfigError
-from vyos.config import Config
-from vyos.util import cmd, run
dir = r'/config/auth/wireguard'
psk = dir + '/preshared.key'
-def check_kmod():
- """ check if kmod is loaded, if not load it """
- if not os.path.exists('/sys/module/wireguard'):
- sl.syslog(sl.LOG_NOTICE, "loading wirguard kmod")
- if run('sudo modprobe wireguard') != 0:
- sl.syslog(sl.LOG_ERR, "modprobe wireguard failed")
- raise ConfigError("modprobe wireguard failed")
+k_mod = 'wireguard'
def generate_keypair(pk, pub):
""" generates a keypair which is stored in /config/auth/wireguard """
@@ -106,7 +101,7 @@ def del_key_dir(kname):
if __name__ == '__main__':
- check_kmod()
+ check_kmod(k_mod)
parser = argparse.ArgumentParser(description='wireguard key management')
parser.add_argument(
'--genkey', action="store_true", help='generate key-pair')
diff --git a/src/services/vyos-http-api-server b/src/services/vyos-http-api-server
index 4c41fa96d..d5730d86c 100755
--- a/src/services/vyos-http-api-server
+++ b/src/services/vyos-http-api-server
@@ -32,7 +32,6 @@ from waitress import serve
from functools import wraps
from vyos.configsession import ConfigSession, ConfigSessionError
-from vyos.config import VyOSError
DEFAULT_CONFIG_FILE = '/etc/vyos/http-api.conf'
@@ -231,8 +230,6 @@ def retrieve_op(command):
return error(400, "\"{0}\" is not a valid config format".format(config_format))
else:
return error(400, "\"{0}\" is not a valid operation".format(op))
- except VyOSError as e:
- return error(400, str(e))
except ConfigSessionError as e:
return error(400, str(e))
except Exception as e:
diff --git a/src/systemd/lcdproc.service b/src/systemd/lcdproc.service
new file mode 100644
index 000000000..5aa99ec78
--- /dev/null
+++ b/src/systemd/lcdproc.service
@@ -0,0 +1,13 @@
+[Unit]
+Description=LCDproc system status information viewer on %I
+Documentation=man:lcdproc(8) http://www.lcdproc.org/
+After=vyos-router.service
+After=LCDd.service
+
+[Service]
+User=root
+ExecStart=/usr/bin/lcdproc -f -c /run/lcdproc/lcdproc.conf
+PIDFile=/run/lcdproc/lcdproc.pid
+
+[Install]
+WantedBy=multi-user.target
diff --git a/src/systemd/wpa_supplicant-macsec@.service b/src/systemd/wpa_supplicant-macsec@.service
index 21e189e4b..7e0bee8e1 100644
--- a/src/systemd/wpa_supplicant-macsec@.service
+++ b/src/systemd/wpa_supplicant-macsec@.service
@@ -1,17 +1,17 @@
-[Unit]
-Description=WPA supplicant daemon (macsec-specific version)
-Requires=sys-subsystem-net-devices-%i.device
-ConditionPathExists=/run/wpa_supplicant/%I.conf
-After=vyos-router.service
-RequiresMountsFor=/run
-
-# NetworkManager users will probably want the dbus version instead.
-
-[Service]
-Type=simple
-WorkingDirectory=/run/wpa_supplicant
-PIDFile=/run/wpa_supplicant/%I.pid
-ExecStart=/sbin/wpa_supplicant -c/run/wpa_supplicant/%I.conf -Dmacsec_linux -i%I
-
-[Install]
-WantedBy=multi-user.target
+[Unit]
+Description=WPA supplicant daemon (macsec-specific version)
+Requires=sys-subsystem-net-devices-%i.device
+ConditionPathExists=/run/wpa_supplicant/%I.conf
+After=vyos-router.service
+RequiresMountsFor=/run
+
+# NetworkManager users will probably want the dbus version instead.
+
+[Service]
+Type=simple
+WorkingDirectory=/run/wpa_supplicant
+PIDFile=/run/wpa_supplicant/%I.pid
+ExecStart=/sbin/wpa_supplicant -c/run/wpa_supplicant/%I.conf -Dmacsec_linux -i%I
+
+[Install]
+WantedBy=multi-user.target
diff --git a/src/tests/test_initial_setup.py b/src/tests/test_initial_setup.py
index c4c59b827..1597025e8 100644
--- a/src/tests/test_initial_setup.py
+++ b/src/tests/test_initial_setup.py
@@ -21,6 +21,7 @@ import tempfile
import unittest
from unittest import TestCase, mock
+from vyos import xml
import vyos.configtree
import vyos.initialsetup as vis
@@ -30,6 +31,7 @@ class TestInitialSetup(TestCase):
with open('tests/data/config.boot.default', 'r') as f:
config_string = f.read()
self.config = vyos.configtree.ConfigTree(config_string)
+ self.xml = xml.load_configuration()
def test_set_user_password(self):
vis.set_user_password(self.config, 'vyos', 'vyosvyos')
@@ -56,7 +58,7 @@ class TestInitialSetup(TestCase):
self.assertEqual(key_type, 'ssh-rsa')
self.assertEqual(key_data, 'fakedata')
- self.assertTrue(self.config.is_tag(["system", "login", "user", "vyos", "authentication", "public-keys"]))
+ self.assertTrue(self.xml.is_tag(["system", "login", "user", "vyos", "authentication", "public-keys"]))
def test_set_ssh_key_without_name(self):
# If key file doesn't include a name, the function will use user name for the key name
@@ -69,7 +71,7 @@ class TestInitialSetup(TestCase):
self.assertEqual(key_type, 'ssh-rsa')
self.assertEqual(key_data, 'fakedata')
- self.assertTrue(self.config.is_tag(["system", "login", "user", "vyos", "authentication", "public-keys"]))
+ self.assertTrue(self.xml.is_tag(["system", "login", "user", "vyos", "authentication", "public-keys"]))
def test_create_user(self):
vis.create_user(self.config, 'jrandomhacker', password='qwerty', key=" ssh-rsa fakedata jrandomhacker@foovax ")
@@ -95,8 +97,8 @@ class TestInitialSetup(TestCase):
vis.set_default_gateway(self.config, '192.0.2.1')
self.assertTrue(self.config.exists(['protocols', 'static', 'route', '0.0.0.0/0', 'next-hop', '192.0.2.1']))
- self.assertTrue(self.config.is_tag(['protocols', 'static', 'route', '0.0.0.0/0', 'next-hop']))
- self.assertTrue(self.config.is_tag(['protocols', 'static', 'route']))
+ self.assertTrue(self.xml.is_tag(['protocols', 'static', 'multicast', 'route', '0.0.0.0/0', 'next-hop']))
+ self.assertTrue(self.xml.is_tag(['protocols', 'static', 'multicast', 'route']))
if __name__ == "__main__":
unittest.main()
diff --git a/src/validators/dotted-decimal b/src/validators/dotted-decimal
new file mode 100755
index 000000000..652110346
--- /dev/null
+++ b/src/validators/dotted-decimal
@@ -0,0 +1,33 @@
+#!/usr/bin/env python3
+#
+# Copyright (C) 2020 VyOS maintainers and contributors
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 or later as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+import re
+import sys
+
+area = sys.argv[1]
+
+res = re.match(r'^(\d+)\.(\d+)\.(\d+)\.(\d+)$', area)
+if not res:
+ print("\'{0}\' is not a valid dotted decimal value".format(area))
+ sys.exit(1)
+else:
+ components = res.groups()
+ for n in range(0, 4):
+ if (int(components[n]) > 255):
+ print("Invalid component of a dotted decimal value: {0} exceeds 255".format(components[n]))
+ sys.exit(1)
+
+sys.exit(0)