diff options
| -rw-r--r-- | python/vyos/ethtool.py | 23 | ||||
| -rw-r--r-- | python/vyos/ifconfig/ethernet.py | 42 | ||||
| -rwxr-xr-x | src/conf_mode/interfaces-ethernet.py | 4 | ||||
| -rwxr-xr-x | src/migration-scripts/interfaces/20-to-21 | 8 |
4 files changed, 45 insertions, 32 deletions
diff --git a/python/vyos/ethtool.py b/python/vyos/ethtool.py index f5796358d..87b9d7dd0 100644 --- a/python/vyos/ethtool.py +++ b/python/vyos/ethtool.py @@ -46,6 +46,8 @@ class Ethtool: _ring_buffers_max = { } _driver_name = None _auto_negotiation = None + _flow_control = None + _flow_control_enabled = None def __init__(self, ifname): # Get driver used for interface @@ -123,6 +125,15 @@ class Ethtool: if value.isdigit(): self._ring_buffers[key] = int(value) + # Get current flow control settings, but this is not supported by + # all NICs (e.g. vmxnet3 does not support is) + out, err = popen(f'ethtool --show-pause {ifname}') + if len(out.splitlines()) > 1: + self._flow_control = True + # read current flow control setting, this returns: + # ['Autonegotiate:', 'on'] + self._flow_control_enabled = out.splitlines()[1].split()[-1] + def _get_generic(self, feature): """ Generic method to read self._features and return a tuple for feature @@ -186,5 +197,17 @@ class Ethtool: return True return False + def check_flow_control(self): + """ Check if the NIC supports flow-control """ + if self._driver_name in ['vmxnet3', 'virtio_net', 'xen_netfront']: + return False + return self._flow_control + + def get_flow_control(self): + if self._flow_control_enabled == None: + raise ValueError('Interface does not support changing '\ + 'flow-control settings!') + return self._flow_control_enabled + def get_auto_negotiation(self): return self._auto_negotiation diff --git a/python/vyos/ifconfig/ethernet.py b/python/vyos/ifconfig/ethernet.py index e5da3ac25..7bd269491 100644 --- a/python/vyos/ifconfig/ethernet.py +++ b/python/vyos/ifconfig/ethernet.py @@ -121,38 +121,16 @@ class EthernetIf(Interface): 'flow control settings!') return - # Get current flow control settings: - cmd = f'ethtool --show-pause {ifname}' - output, code = self._popen(cmd) - if code == 76: - # the interface does not support it - return '' - if code: - # never fail here as it prevent vyos to boot - print(f'unexpected return code {code} from {cmd}') - return '' - - # The above command returns - with tabs: - # - # Pause parameters for eth0: - # Autonegotiate: on - # RX: off - # TX: off - if re.search("Autonegotiate:\ton", output): - if enable == "on": - # flowcontrol is already enabled - no need to re-enable it again - # this will prevent the interface from flapping as applying the - # flow-control settings will take the interface down and bring - # it back up every time. - return '' - - # Assemble command executed on system. Unfortunately there is no way - # to change this setting via sysfs - cmd = f'ethtool --pause {ifname} autoneg {enable} tx {enable} rx {enable}' - output, code = self._popen(cmd) - if code: - print(f'could not set flowcontrol for {ifname}') - return output + current = self.ethtool.get_flow_control() + if current != enable: + # Assemble command executed on system. Unfortunately there is no way + # to change this setting via sysfs + cmd = f'ethtool --pause {ifname} autoneg {enable} tx {enable} rx {enable}' + output, code = self._popen(cmd) + if code: + print(f'Could not set flowcontrol for {ifname}') + return output + return None def set_speed_duplex(self, speed, duplex): """ diff --git a/src/conf_mode/interfaces-ethernet.py b/src/conf_mode/interfaces-ethernet.py index f604f787c..81ed36bf2 100755 --- a/src/conf_mode/interfaces-ethernet.py +++ b/src/conf_mode/interfaces-ethernet.py @@ -88,6 +88,10 @@ def verify(ethernet): raise ConfigError(f'Adapter does not support changing speed and duplex '\ f'settings to: {speed}/{duplex}!') + if 'disable_flow_control' in ethernet: + if not ethtool.check_flow_control(): + raise ConfigError('Adapter does not support changing flow-control settings!') + if 'ring_buffer' in ethernet: max_rx = ethtool.get_ring_buffer_max('rx') if not max_rx: diff --git a/src/migration-scripts/interfaces/20-to-21 b/src/migration-scripts/interfaces/20-to-21 index bd89dcdb4..0bd858760 100755 --- a/src/migration-scripts/interfaces/20-to-21 +++ b/src/migration-scripts/interfaces/20-to-21 @@ -104,6 +104,14 @@ for ifname in config.list_nodes(base): config.delete(speed_path) config.delete(duplex_path) + # Also while processing the interface configuration, not all adapters support + # changing disabling flow-control - or change this setting. If disabling + # flow-control is not supported by the NIC, we remove the setting from CLI + flow_control_path = base + [ifname, 'disable-flow-control'] + if config.exists(flow_control_path): + if not eth.check_flow_control(): + config.delete(flow_control_path) + try: with open(file_name, 'w') as f: f.write(config.to_string()) |