diff options
| -rw-r--r-- | .gitattributes | 84 | ||||
| -rw-r--r-- | .vscode/settings.json | 26 | ||||
| -rw-r--r-- | data/templates/container/containers.conf.j2 | 1418 | ||||
| -rw-r--r-- | data/templates/frr/eigrpd.frr.j2 | 40 | ||||
| -rw-r--r-- | data/templates/system/sysctl.conf.j2 | 14 | ||||
| -rw-r--r-- | interface-definitions/include/constraint/host-name.xml.i | 6 | ||||
| -rw-r--r-- | interface-definitions/include/policy/route-common.xml.i | 514 | ||||
| -rw-r--r-- | interface-definitions/include/protocol-tcp-udp.xml.i | 44 | ||||
| -rw-r--r-- | interface-definitions/include/rip/version.xml.i | 36 | ||||
| -rwxr-xr-x | op-mode-definitions/generate-system-login-user.xml.in | 180 |
10 files changed, 1223 insertions, 1139 deletions
diff --git a/.gitattributes b/.gitattributes index ea2cc59e4..624e00f03 100644 --- a/.gitattributes +++ b/.gitattributes @@ -1,4 +1,80 @@ -data/templates/**/*.conf linguist-language=Jinja -*.tmpl linguist-language=Jinja -*.xml.i linguist-language=XML -*.xml.in linguist-language=XML +# Common settings that generally should always be used with your language specific settings + +# Auto detect text files and perform LF normalization +* text=auto + +# +# The above will handle all files NOT found below +# + +# Documents +*.md text diff=markdown +*.mdx text diff=markdown +*.adoc text +*.csv text eol=crlf +*.rst text +*.txt text + +# Graphics +*.png binary +*.jpg binary +*.jpeg binary +*.gif binary +*.tif binary +*.tiff binary +*.ico binary +# SVG treated as text by default. +*.svg text +# If you want to treat it as binary, +# use the following line instead. +# *.svg binary + +# Scripts +*.bash text eol=lf diff=bash +*.sh text eol=lf diff=bash + +# Serialisation +*.conf text +*.graphql text +*.j2 text +*.json text +*.rules text +*.service text +*.toml text +*.tmpl text linguist-language=Jinja +*.xml text +*.xml.i text linguist-language=XML +*.xml.in text linguist-language=XML +*.yaml text +*.yml text + +# Text files where line endings should be preserved +*.patch -text +*.diff -text + +# Python files +*.pxd text diff=python +*.py text diff=python +*.py3 text diff=python +*.pyw text diff=python +*.pyx text diff=python +*.pyz text diff=python +*.pyi text diff=python + +# Fix syntax highlighting on GitHub to allow comments +.vscode/*.json linguist-language=JSON-with-Comments + +# +# Exclude files from exporting +# + +.gitattributes export-ignore +.gitignore export-ignore +.gitkeep export-ignore +*.pyc binary export-ignore +*.pyo binary export-ignore + +# +# Enable syntax highlighting for VSCode settings +# +.vscode/settings.json linguist-language=jsonc diff --git a/.vscode/settings.json b/.vscode/settings.json index caa87ba4a..ab3af6cf1 100644 --- a/.vscode/settings.json +++ b/.vscode/settings.json @@ -1,18 +1,26 @@ { - "files.trimTrailingWhitespace": true, - "editor.tabSize": 4, - "editor.insertSpaces": true, "files.insertFinalNewline": true, - "files.eol": "\n", - # https://code.visualstudio.com/docs/languages/identifiers#_known-language-identifiers + "files.trimFinalNewlines": true, + "files.trimTrailingWhitespace": true, + + // https://code.visualstudio.com/docs/languages/identifiers#_known-language-identifiers "files.associations": { + "*.j2": "jinja", "*.xml.i": "xml", "*.xml.in": "xml", - "*.j2": "jinja", }, - "editor.indentSize": "tabSize", "[jinja]": { - "editor.tabSize": 4, "editor.wordBasedSuggestions": false - } + }, + // https://code.visualstudio.com/docs/python/settings-reference + "python.analysis.extraPaths": [ + "./python" + ], + // https://help.gitkraken.com/gitlens/gitlens-settings/#autolink-settings + "gitlens.autolinks": [ + { + "prefix": "T", + "url": "https://vyos.dev/T<num>" + } + ], } diff --git a/data/templates/container/containers.conf.j2 b/data/templates/container/containers.conf.j2 index c635ca213..c8b54dfbb 100644 --- a/data/templates/container/containers.conf.j2 +++ b/data/templates/container/containers.conf.j2 @@ -1,709 +1,709 @@ -### Autogenerated by container.py ###
-
-# The containers configuration file specifies all of the available configuration
-# command-line options/flags for container engine tools like Podman & Buildah,
-# but in a TOML format that can be easily modified and versioned.
-
-# Please refer to containers.conf(5) for details of all configuration options.
-# Not all container engines implement all of the options.
-# All of the options have hard coded defaults and these options will override
-# the built in defaults. Users can then override these options via the command
-# line. Container engines will read containers.conf files in up to three
-# locations in the following order:
-# 1. /usr/share/containers/containers.conf
-# 2. /etc/containers/containers.conf
-# 3. $HOME/.config/containers/containers.conf (Rootless containers ONLY)
-# Items specified in the latter containers.conf, if they exist, override the
-# previous containers.conf settings, or the default settings.
-
-[containers]
-
-# List of annotation. Specified as
-# "key = value"
-# If it is empty or commented out, no annotations will be added
-#
-#annotations = []
-
-# Used to change the name of the default AppArmor profile of container engine.
-#
-#apparmor_profile = "container-default"
-
-# The hosts entries from the base hosts file are added to the containers hosts
-# file. This must be either an absolute path or as special values "image" which
-# uses the hosts file from the container image or "none" which means
-# no base hosts file is used. The default is "" which will use /etc/hosts.
-#
-#base_hosts_file = ""
-
-# Default way to to create a cgroup namespace for the container
-# Options are:
-# `private` Create private Cgroup Namespace for the container.
-# `host` Share host Cgroup Namespace with the container.
-#
-#cgroupns = "private"
-
-# Control container cgroup configuration
-# Determines whether the container will create CGroups.
-# Options are:
-# `enabled` Enable cgroup support within container
-# `disabled` Disable cgroup support, will inherit cgroups from parent
-# `no-conmon` Do not create a cgroup dedicated to conmon.
-#
-#cgroups = "enabled"
-
-# List of default capabilities for containers. If it is empty or commented out,
-# the default capabilities defined in the container engine will be added.
-#
-default_capabilities = [
- "CHOWN",
- "DAC_OVERRIDE",
- "FOWNER",
- "FSETID",
- "KILL",
- "NET_BIND_SERVICE",
- "SETFCAP",
- "SETGID",
- "SETPCAP",
- "SETUID",
- "SYS_CHROOT"
-]
-
-# A list of sysctls to be set in containers by default,
-# specified as "name=value",
-# for example:"net.ipv4.ping_group_range=0 0".
-#
-default_sysctls = [
- "net.ipv4.ping_group_range=0 0",
-]
-
-# A list of ulimits to be set in containers by default, specified as
-# "<ulimit name>=<soft limit>:<hard limit>", for example:
-# "nofile=1024:2048"
-# See setrlimit(2) for a list of resource names.
-# Any limit not specified here will be inherited from the process launching the
-# container engine.
-# Ulimits has limits for non privileged container engines.
-#
-#default_ulimits = [
-# "nofile=1280:2560",
-#]
-
-# List of devices. Specified as
-# "<device-on-host>:<device-on-container>:<permissions>", for example:
-# "/dev/sdc:/dev/xvdc:rwm".
-# If it is empty or commented out, only the default devices will be used
-#
-#devices = []
-
-# List of default DNS options to be added to /etc/resolv.conf inside of the container.
-#
-#dns_options = []
-
-# List of default DNS search domains to be added to /etc/resolv.conf inside of the container.
-#
-#dns_searches = []
-
-# Set default DNS servers.
-# This option can be used to override the DNS configuration passed to the
-# container. The special value "none" can be specified to disable creation of
-# /etc/resolv.conf in the container.
-# The /etc/resolv.conf file in the image will be used without changes.
-#
-#dns_servers = []
-
-# Environment variable list for the conmon process; used for passing necessary
-# environment variables to conmon or the runtime.
-#
-#env = [
-# "PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin",
-# "TERM=xterm",
-#]
-
-# Pass all host environment variables into the container.
-#
-#env_host = false
-
-# Set the ip for the host.containers.internal entry in the containers /etc/hosts
-# file. This can be set to "none" to disable adding this entry. By default it
-# will automatically choose the host ip.
-#
-# NOTE: When using podman machine this entry will never be added to the containers
-# hosts file instead the gvproxy dns resolver will resolve this hostname. Therefore
-# it is not possible to disable the entry in this case.
-#
-#host_containers_internal_ip = ""
-
-# Default proxy environment variables passed into the container.
-# The environment variables passed in include:
-# http_proxy, https_proxy, ftp_proxy, no_proxy, and the upper case versions of
-# these. This option is needed when host system uses a proxy but container
-# should not use proxy. Proxy environment variables specified for the container
-# in any other way will override the values passed from the host.
-#
-#http_proxy = true
-
-# Run an init inside the container that forwards signals and reaps processes.
-#
-#init = false
-
-# Container init binary, if init=true, this is the init binary to be used for containers.
-#
-#init_path = "/usr/libexec/podman/catatonit"
-
-# Default way to to create an IPC namespace (POSIX SysV IPC) for the container
-# Options are:
-# "host" Share host IPC Namespace with the container.
-# "none" Create shareable IPC Namespace for the container without a private /dev/shm.
-# "private" Create private IPC Namespace for the container, other containers are not allowed to share it.
-# "shareable" Create shareable IPC Namespace for the container.
-#
-#ipcns = "shareable"
-
-# keyring tells the container engine whether to create
-# a kernel keyring for use within the container.
-#
-#keyring = true
-
-# label tells the container engine whether to use container separation using
-# MAC(SELinux) labeling or not.
-# The label flag is ignored on label disabled systems.
-#
-#label = true
-
-# Logging driver for the container. Available options: k8s-file and journald.
-#
-#log_driver = "k8s-file"
-
-# Maximum size allowed for the container log file. Negative numbers indicate
-# that no size limit is imposed. If positive, it must be >= 8192 to match or
-# exceed conmon's read buffer. The file is truncated and re-opened so the
-# limit is never exceeded.
-#
-#log_size_max = -1
-
-# Specifies default format tag for container log messages.
-# This is useful for creating a specific tag for container log messages.
-# Containers logs default to truncated container ID as a tag.
-#
-#log_tag = ""
-
-# Default way to to create a Network namespace for the container
-# Options are:
-# `private` Create private Network Namespace for the container.
-# `host` Share host Network Namespace with the container.
-# `none` Containers do not use the network
-#
-#netns = "private"
-
-# Create /etc/hosts for the container. By default, container engine manage
-# /etc/hosts, automatically adding the container's own IP address.
-#
-#no_hosts = false
-
-# Default way to to create a PID namespace for the container
-# Options are:
-# `private` Create private PID Namespace for the container.
-# `host` Share host PID Namespace with the container.
-#
-#pidns = "private"
-
-# Maximum number of processes allowed in a container.
-#
-#pids_limit = 2048
-
-# Copy the content from the underlying image into the newly created volume
-# when the container is created instead of when it is started. If false,
-# the container engine will not copy the content until the container is started.
-# Setting it to true may have negative performance implications.
-#
-#prepare_volume_on_create = false
-
-# Path to the seccomp.json profile which is used as the default seccomp profile
-# for the runtime.
-#
-#seccomp_profile = "/usr/share/containers/seccomp.json"
-
-# Size of /dev/shm. Specified as <number><unit>.
-# Unit is optional, values:
-# b (bytes), k (kilobytes), m (megabytes), or g (gigabytes).
-# If the unit is omitted, the system uses bytes.
-#
-#shm_size = "65536k"
-
-# Set timezone in container. Takes IANA timezones as well as "local",
-# which sets the timezone in the container to match the host machine.
-#
-#tz = ""
-
-# Set umask inside the container
-#
-#umask = "0022"
-
-# Default way to to create a User namespace for the container
-# Options are:
-# `auto` Create unique User Namespace for the container.
-# `host` Share host User Namespace with the container.
-#
-#userns = "host"
-
-# Number of UIDs to allocate for the automatic container creation.
-# UIDs are allocated from the "container" UIDs listed in
-# /etc/subuid & /etc/subgid
-#
-#userns_size = 65536
-
-# Default way to to create a UTS namespace for the container
-# Options are:
-# `private` Create private UTS Namespace for the container.
-# `host` Share host UTS Namespace with the container.
-#
-#utsns = "private"
-
-# List of volumes. Specified as
-# "<directory-on-host>:<directory-in-container>:<options>", for example:
-# "/db:/var/lib/db:ro".
-# If it is empty or commented out, no volumes will be added
-#
-#volumes = []
-
-[secrets]
-#driver = "file"
-
-[secrets.opts]
-#root = "/example/directory"
-
-[network]
-
-# Network backend determines what network driver will be used to set up and tear down container networks.
-# Valid values are "cni" and "netavark".
-# The default value is empty which means that it will automatically choose CNI or netavark. If there are
-# already containers/images or CNI networks preset it will choose CNI.
-#
-# Before changing this value all containers must be stopped otherwise it is likely that
-# iptables rules and network interfaces might leak on the host. A reboot will fix this.
-#
-network_backend = "netavark"
-
-# Path to directory where CNI plugin binaries are located.
-#
-#cni_plugin_dirs = [
-# "/usr/local/libexec/cni",
-# "/usr/libexec/cni",
-# "/usr/local/lib/cni",
-# "/usr/lib/cni",
-# "/opt/cni/bin",
-#]
-
-# The network name of the default network to attach pods to.
-#
-#default_network = "podman"
-
-# The default subnet for the default network given in default_network.
-# If a network with that name does not exist, a new network using that name and
-# this subnet will be created.
-# Must be a valid IPv4 CIDR prefix.
-#
-#default_subnet = "10.88.0.0/16"
-
-# DefaultSubnetPools is a list of subnets and size which are used to
-# allocate subnets automatically for podman network create.
-# It will iterate through the list and will pick the first free subnet
-# with the given size. This is only used for ipv4 subnets, ipv6 subnets
-# are always assigned randomly.
-#
-#default_subnet_pools = [
-# {"base" = "10.89.0.0/16", "size" = 24},
-# {"base" = "10.90.0.0/15", "size" = 24},
-# {"base" = "10.92.0.0/14", "size" = 24},
-# {"base" = "10.96.0.0/11", "size" = 24},
-# {"base" = "10.128.0.0/9", "size" = 24},
-#]
-
-# Path to the directory where network configuration files are located.
-# For the CNI backend the default is "/etc/cni/net.d" as root
-# and "$HOME/.config/cni/net.d" as rootless.
-# For the netavark backend "/etc/containers/networks" is used as root
-# and "$graphroot/networks" as rootless.
-#
-#network_config_dir = "/etc/cni/net.d/"
-
-# Port to use for dns forwarding daemon with netavark in rootful bridge
-# mode and dns enabled.
-# Using an alternate port might be useful if other dns services should
-# run on the machine.
-#
-#dns_bind_port = 53
-
-[engine]
-# Index to the active service
-#
-#active_service = production
-
-# The compression format to use when pushing an image.
-# Valid options are: `gzip`, `zstd` and `zstd:chunked`.
-#
-#compression_format = "gzip"
-
-
-# Cgroup management implementation used for the runtime.
-# Valid options "systemd" or "cgroupfs"
-#
-#cgroup_manager = "systemd"
-
-# Environment variables to pass into conmon
-#
-#conmon_env_vars = [
-# "PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
-#]
-
-# Paths to look for the conmon container manager binary
-#
-#conmon_path = [
-# "/usr/libexec/podman/conmon",
-# "/usr/local/libexec/podman/conmon",
-# "/usr/local/lib/podman/conmon",
-# "/usr/bin/conmon",
-# "/usr/sbin/conmon",
-# "/usr/local/bin/conmon",
-# "/usr/local/sbin/conmon"
-#]
-
-# Enforces using docker.io for completing short names in Podman's compatibility
-# REST API. Note that this will ignore unqualified-search-registries and
-# short-name aliases defined in containers-registries.conf(5).
-#compat_api_enforce_docker_hub = true
-
-# Specify the keys sequence used to detach a container.
-# Format is a single character [a-Z] or a comma separated sequence of
-# `ctrl-<value>`, where `<value>` is one of:
-# `a-z`, `@`, `^`, `[`, `\`, `]`, `^` or `_`
-#
-#detach_keys = "ctrl-p,ctrl-q"
-
-# Determines whether engine will reserve ports on the host when they are
-# forwarded to containers. When enabled, when ports are forwarded to containers,
-# ports are held open by as long as the container is running, ensuring that
-# they cannot be reused by other programs on the host. However, this can cause
-# significant memory usage if a container has many ports forwarded to it.
-# Disabling this can save memory.
-#
-#enable_port_reservation = true
-
-# Environment variables to be used when running the container engine (e.g., Podman, Buildah).
-# For example "http_proxy=internal.proxy.company.com".
-# Note these environment variables will not be used within the container.
-# Set the env section under [containers] table, if you want to set environment variables for the container.
-#
-#env = []
-
-# Define where event logs will be stored, when events_logger is "file".
-#events_logfile_path=""
-
-# Sets the maximum size for events_logfile_path.
-# The size can be b (bytes), k (kilobytes), m (megabytes), or g (gigabytes).
-# The format for the size is `<number><unit>`, e.g., `1b` or `3g`.
-# If no unit is included then the size will be read in bytes.
-# When the limit is exceeded, the logfile will be rotated and the old one will be deleted.
-# If the maximum size is set to 0, then no limit will be applied,
-# and the logfile will not be rotated.
-#events_logfile_max_size = "1m"
-
-# Selects which logging mechanism to use for container engine events.
-# Valid values are `journald`, `file` and `none`.
-#
-#events_logger = "journald"
-
-# A is a list of directories which are used to search for helper binaries.
-#
-#helper_binaries_dir = [
-# "/usr/local/libexec/podman",
-# "/usr/local/lib/podman",
-# "/usr/libexec/podman",
-# "/usr/lib/podman",
-#]
-
-# Path to OCI hooks directories for automatically executed hooks.
-#
-#hooks_dir = [
-# "/usr/share/containers/oci/hooks.d",
-#]
-
-# Manifest Type (oci, v2s2, or v2s1) to use when pulling, pushing, building
-# container images. By default image pulled and pushed match the format of the
-# source image. Building/committing defaults to OCI.
-#
-#image_default_format = ""
-
-# Default transport method for pulling and pushing for images
-#
-#image_default_transport = "docker://"
-
-# Maximum number of image layers to be copied (pulled/pushed) simultaneously.
-# Not setting this field, or setting it to zero, will fall back to containers/image defaults.
-#
-#image_parallel_copies = 0
-
-# Tells container engines how to handle the builtin image volumes.
-# * bind: An anonymous named volume will be created and mounted
-# into the container.
-# * tmpfs: The volume is mounted onto the container as a tmpfs,
-# which allows users to create content that disappears when
-# the container is stopped.
-# * ignore: All volumes are just ignored and no action is taken.
-#
-#image_volume_mode = ""
-
-# Default command to run the infra container
-#
-#infra_command = "/pause"
-
-# Infra (pause) container image name for pod infra containers. When running a
-# pod, we start a `pause` process in a container to hold open the namespaces
-# associated with the pod. This container does nothing other then sleep,
-# reserving the pods resources for the lifetime of the pod. By default container
-# engines run a builtin container using the pause executable. If you want override
-# specify an image to pull.
-#
-#infra_image = ""
-
-# Specify the locking mechanism to use; valid values are "shm" and "file".
-# Change the default only if you are sure of what you are doing, in general
-# "file" is useful only on platforms where cgo is not available for using the
-# faster "shm" lock type. You may need to run "podman system renumber" after
-# you change the lock type.
-#
-#lock_type** = "shm"
-
-# MultiImageArchive - if true, the container engine allows for storing archives
-# (e.g., of the docker-archive transport) with multiple images. By default,
-# Podman creates single-image archives.
-#
-#multi_image_archive = "false"
-
-# Default engine namespace
-# If engine is joined to a namespace, it will see only containers and pods
-# that were created in the same namespace, and will create new containers and
-# pods in that namespace.
-# The default namespace is "", which corresponds to no namespace. When no
-# namespace is set, all containers and pods are visible.
-#
-#namespace = ""
-
-# Path to the slirp4netns binary
-#
-#network_cmd_path = ""
-
-# Default options to pass to the slirp4netns binary.
-# Valid options values are:
-#
-# - allow_host_loopback=true|false: Allow the slirp4netns to reach the host loopback IP (`10.0.2.2`).
-# Default is false.
-# - mtu=MTU: Specify the MTU to use for this network. (Default is `65520`).
-# - cidr=CIDR: Specify ip range to use for this network. (Default is `10.0.2.0/24`).
-# - enable_ipv6=true|false: Enable IPv6. Default is true. (Required for `outbound_addr6`).
-# - outbound_addr=INTERFACE: Specify the outbound interface slirp should bind to (ipv4 traffic only).
-# - outbound_addr=IPv4: Specify the outbound ipv4 address slirp should bind to.
-# - outbound_addr6=INTERFACE: Specify the outbound interface slirp should bind to (ipv6 traffic only).
-# - outbound_addr6=IPv6: Specify the outbound ipv6 address slirp should bind to.
-# - port_handler=rootlesskit: Use rootlesskit for port forwarding. Default.
-# Note: Rootlesskit changes the source IP address of incoming packets to a IP address in the container
-# network namespace, usually `10.0.2.100`. If your application requires the real source IP address,
-# e.g. web server logs, use the slirp4netns port handler. The rootlesskit port handler is also used for
-# rootless containers when connected to user-defined networks.
-# - port_handler=slirp4netns: Use the slirp4netns port forwarding, it is slower than rootlesskit but
-# preserves the correct source IP address. This port handler cannot be used for user-defined networks.
-#
-#network_cmd_options = []
-
-# Whether to use chroot instead of pivot_root in the runtime
-#
-#no_pivot_root = false
-
-# Number of locks available for containers and pods.
-# If this is changed, a lock renumber must be performed (e.g. with the
-# 'podman system renumber' command).
-#
-#num_locks = 2048
-
-# Set the exit policy of the pod when the last container exits.
-#pod_exit_policy = "continue"
-
-# Whether to pull new image before running a container
-#
-#pull_policy = "missing"
-
-# Indicates whether the application should be running in remote mode. This flag modifies the
-# --remote option on container engines. Setting the flag to true will default
-# `podman --remote=true` for access to the remote Podman service.
-#
-#remote = false
-
-# Default OCI runtime
-#
-#runtime = "crun"
-
-# List of the OCI runtimes that support --format=json. When json is supported
-# engine will use it for reporting nicer errors.
-#
-#runtime_supports_json = ["crun", "runc", "kata", "runsc", "krun"]
-
-# List of the OCI runtimes that supports running containers with KVM Separation.
-#
-#runtime_supports_kvm = ["kata", "krun"]
-
-# List of the OCI runtimes that supports running containers without cgroups.
-#
-#runtime_supports_nocgroups = ["crun", "krun"]
-
-# Default location for storing temporary container image content. Can be overridden with the TMPDIR environment
-# variable. If you specify "storage", then the location of the
-# container/storage tmp directory will be used.
-# image_copy_tmp_dir="/var/tmp"
-
-# Number of seconds to wait without a connection
-# before the `podman system service` times out and exits
-#
-#service_timeout = 5
-
-# Directory for persistent engine files (database, etc)
-# By default, this will be configured relative to where the containers/storage
-# stores containers
-# Uncomment to change location from this default
-#
-#static_dir = "/var/lib/containers/storage/libpod"
-
-# Number of seconds to wait for container to exit before sending kill signal.
-#
-#stop_timeout = 10
-
-# Number of seconds to wait before exit command in API process is given to.
-# This mimics Docker's exec cleanup behaviour, where the default is 5 minutes (value is in seconds).
-#
-#exit_command_delay = 300
-
-# map of service destinations
-#
-#[service_destinations]
-# [service_destinations.production]
-# URI to access the Podman service
-# Examples:
-# rootless "unix://run/user/$UID/podman/podman.sock" (Default)
-# rootful "unix://run/podman/podman.sock (Default)
-# remote rootless ssh://engineering.lab.company.com/run/user/1000/podman/podman.sock
-# remote rootful ssh://root@10.10.1.136:22/run/podman/podman.sock
-#
-# uri = "ssh://user@production.example.com/run/user/1001/podman/podman.sock"
-# Path to file containing ssh identity key
-# identity = "~/.ssh/id_rsa"
-
-# Directory for temporary files. Must be tmpfs (wiped after reboot)
-#
-#tmp_dir = "/run/libpod"
-
-# Directory for libpod named volumes.
-# By default, this will be configured relative to where containers/storage
-# stores containers.
-# Uncomment to change location from this default.
-#
-#volume_path = "/var/lib/containers/storage/volumes"
-
-# Default timeout (in seconds) for volume plugin operations.
-# Plugins are external programs accessed via a REST API; this sets a timeout
-# for requests to that API.
-# A value of 0 is treated as no timeout.
-#volume_plugin_timeout = 5
-
-# Paths to look for a valid OCI runtime (crun, runc, kata, runsc, krun, etc)
-[engine.runtimes]
-#crun = [
-# "/usr/bin/crun",
-# "/usr/sbin/crun",
-# "/usr/local/bin/crun",
-# "/usr/local/sbin/crun",
-# "/sbin/crun",
-# "/bin/crun",
-# "/run/current-system/sw/bin/crun",
-#]
-
-#kata = [
-# "/usr/bin/kata-runtime",
-# "/usr/sbin/kata-runtime",
-# "/usr/local/bin/kata-runtime",
-# "/usr/local/sbin/kata-runtime",
-# "/sbin/kata-runtime",
-# "/bin/kata-runtime",
-# "/usr/bin/kata-qemu",
-# "/usr/bin/kata-fc",
-#]
-
-#runc = [
-# "/usr/bin/runc",
-# "/usr/sbin/runc",
-# "/usr/local/bin/runc",
-# "/usr/local/sbin/runc",
-# "/sbin/runc",
-# "/bin/runc",
-# "/usr/lib/cri-o-runc/sbin/runc",
-#]
-
-#runsc = [
-# "/usr/bin/runsc",
-# "/usr/sbin/runsc",
-# "/usr/local/bin/runsc",
-# "/usr/local/sbin/runsc",
-# "/bin/runsc",
-# "/sbin/runsc",
-# "/run/current-system/sw/bin/runsc",
-#]
-
-#krun = [
-# "/usr/bin/krun",
-# "/usr/local/bin/krun",
-#]
-
-[engine.volume_plugins]
-#testplugin = "/run/podman/plugins/test.sock"
-
-[machine]
-# Number of CPU's a machine is created with.
-#
-#cpus=1
-
-# The size of the disk in GB created when init-ing a podman-machine VM.
-#
-#disk_size=10
-
-# Default image URI when creating a new VM using `podman machine init`.
-# Options: On Linux/Mac, `testing`, `stable`, `next`. On Windows, the major
-# version of the OS (e.g `36`) for Fedora 36. For all platforms you can
-# alternatively specify a custom download URL to an image. Container engines
-# translate URIs $OS and $ARCH to the native OS and ARCH. URI
-# "https://example.com/$OS/$ARCH/foobar.ami" becomes
-# "https://example.com/linux/amd64/foobar.ami" on a Linux AMD machine.
-# The default value is `testing`.
-#
-# image = "testing"
-
-# Memory in MB a machine is created with.
-#
-#memory=2048
-
-# The username to use and create on the podman machine OS for rootless
-# container access.
-#
-#user = "core"
-
-# Host directories to be mounted as volumes into the VM by default.
-# Environment variables like $HOME as well as complete paths are supported for
-# the source and destination. An optional third field `:ro` can be used to
-# tell the container engines to mount the volume readonly.
-#
-# volumes = [
-# "$HOME:$HOME",
-#]
-
-# The [machine] table MUST be the last entry in this file.
-# (Unless another table is added)
-# TOML does not provide a way to end a table other than a further table being
-# defined, so every key hereafter will be part of [machine] and not the
-# main config.
+### Autogenerated by container.py ### + +# The containers configuration file specifies all of the available configuration +# command-line options/flags for container engine tools like Podman & Buildah, +# but in a TOML format that can be easily modified and versioned. + +# Please refer to containers.conf(5) for details of all configuration options. +# Not all container engines implement all of the options. +# All of the options have hard coded defaults and these options will override +# the built in defaults. Users can then override these options via the command +# line. Container engines will read containers.conf files in up to three +# locations in the following order: +# 1. /usr/share/containers/containers.conf +# 2. /etc/containers/containers.conf +# 3. $HOME/.config/containers/containers.conf (Rootless containers ONLY) +# Items specified in the latter containers.conf, if they exist, override the +# previous containers.conf settings, or the default settings. + +[containers] + +# List of annotation. Specified as +# "key = value" +# If it is empty or commented out, no annotations will be added +# +#annotations = [] + +# Used to change the name of the default AppArmor profile of container engine. +# +#apparmor_profile = "container-default" + +# The hosts entries from the base hosts file are added to the containers hosts +# file. This must be either an absolute path or as special values "image" which +# uses the hosts file from the container image or "none" which means +# no base hosts file is used. The default is "" which will use /etc/hosts. +# +#base_hosts_file = "" + +# Default way to to create a cgroup namespace for the container +# Options are: +# `private` Create private Cgroup Namespace for the container. +# `host` Share host Cgroup Namespace with the container. +# +#cgroupns = "private" + +# Control container cgroup configuration +# Determines whether the container will create CGroups. +# Options are: +# `enabled` Enable cgroup support within container +# `disabled` Disable cgroup support, will inherit cgroups from parent +# `no-conmon` Do not create a cgroup dedicated to conmon. +# +#cgroups = "enabled" + +# List of default capabilities for containers. If it is empty or commented out, +# the default capabilities defined in the container engine will be added. +# +default_capabilities = [ + "CHOWN", + "DAC_OVERRIDE", + "FOWNER", + "FSETID", + "KILL", + "NET_BIND_SERVICE", + "SETFCAP", + "SETGID", + "SETPCAP", + "SETUID", + "SYS_CHROOT" +] + +# A list of sysctls to be set in containers by default, +# specified as "name=value", +# for example:"net.ipv4.ping_group_range=0 0". +# +default_sysctls = [ + "net.ipv4.ping_group_range=0 0", +] + +# A list of ulimits to be set in containers by default, specified as +# "<ulimit name>=<soft limit>:<hard limit>", for example: +# "nofile=1024:2048" +# See setrlimit(2) for a list of resource names. +# Any limit not specified here will be inherited from the process launching the +# container engine. +# Ulimits has limits for non privileged container engines. +# +#default_ulimits = [ +# "nofile=1280:2560", +#] + +# List of devices. Specified as +# "<device-on-host>:<device-on-container>:<permissions>", for example: +# "/dev/sdc:/dev/xvdc:rwm". +# If it is empty or commented out, only the default devices will be used +# +#devices = [] + +# List of default DNS options to be added to /etc/resolv.conf inside of the container. +# +#dns_options = [] + +# List of default DNS search domains to be added to /etc/resolv.conf inside of the container. +# +#dns_searches = [] + +# Set default DNS servers. +# This option can be used to override the DNS configuration passed to the +# container. The special value "none" can be specified to disable creation of +# /etc/resolv.conf in the container. +# The /etc/resolv.conf file in the image will be used without changes. +# +#dns_servers = [] + +# Environment variable list for the conmon process; used for passing necessary +# environment variables to conmon or the runtime. +# +#env = [ +# "PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin", +# "TERM=xterm", +#] + +# Pass all host environment variables into the container. +# +#env_host = false + +# Set the ip for the host.containers.internal entry in the containers /etc/hosts +# file. This can be set to "none" to disable adding this entry. By default it +# will automatically choose the host ip. +# +# NOTE: When using podman machine this entry will never be added to the containers +# hosts file instead the gvproxy dns resolver will resolve this hostname. Therefore +# it is not possible to disable the entry in this case. +# +#host_containers_internal_ip = "" + +# Default proxy environment variables passed into the container. +# The environment variables passed in include: +# http_proxy, https_proxy, ftp_proxy, no_proxy, and the upper case versions of +# these. This option is needed when host system uses a proxy but container +# should not use proxy. Proxy environment variables specified for the container +# in any other way will override the values passed from the host. +# +#http_proxy = true + +# Run an init inside the container that forwards signals and reaps processes. +# +#init = false + +# Container init binary, if init=true, this is the init binary to be used for containers. +# +#init_path = "/usr/libexec/podman/catatonit" + +# Default way to to create an IPC namespace (POSIX SysV IPC) for the container +# Options are: +# "host" Share host IPC Namespace with the container. +# "none" Create shareable IPC Namespace for the container without a private /dev/shm. +# "private" Create private IPC Namespace for the container, other containers are not allowed to share it. +# "shareable" Create shareable IPC Namespace for the container. +# +#ipcns = "shareable" + +# keyring tells the container engine whether to create +# a kernel keyring for use within the container. +# +#keyring = true + +# label tells the container engine whether to use container separation using +# MAC(SELinux) labeling or not. +# The label flag is ignored on label disabled systems. +# +#label = true + +# Logging driver for the container. Available options: k8s-file and journald. +# +#log_driver = "k8s-file" + +# Maximum size allowed for the container log file. Negative numbers indicate +# that no size limit is imposed. If positive, it must be >= 8192 to match or +# exceed conmon's read buffer. The file is truncated and re-opened so the +# limit is never exceeded. +# +#log_size_max = -1 + +# Specifies default format tag for container log messages. +# This is useful for creating a specific tag for container log messages. +# Containers logs default to truncated container ID as a tag. +# +#log_tag = "" + +# Default way to to create a Network namespace for the container +# Options are: +# `private` Create private Network Namespace for the container. +# `host` Share host Network Namespace with the container. +# `none` Containers do not use the network +# +#netns = "private" + +# Create /etc/hosts for the container. By default, container engine manage +# /etc/hosts, automatically adding the container's own IP address. +# +#no_hosts = false + +# Default way to to create a PID namespace for the container +# Options are: +# `private` Create private PID Namespace for the container. +# `host` Share host PID Namespace with the container. +# +#pidns = "private" + +# Maximum number of processes allowed in a container. +# +#pids_limit = 2048 + +# Copy the content from the underlying image into the newly created volume +# when the container is created instead of when it is started. If false, +# the container engine will not copy the content until the container is started. +# Setting it to true may have negative performance implications. +# +#prepare_volume_on_create = false + +# Path to the seccomp.json profile which is used as the default seccomp profile +# for the runtime. +# +#seccomp_profile = "/usr/share/containers/seccomp.json" + +# Size of /dev/shm. Specified as <number><unit>. +# Unit is optional, values: +# b (bytes), k (kilobytes), m (megabytes), or g (gigabytes). +# If the unit is omitted, the system uses bytes. +# +#shm_size = "65536k" + +# Set timezone in container. Takes IANA timezones as well as "local", +# which sets the timezone in the container to match the host machine. +# +#tz = "" + +# Set umask inside the container +# +#umask = "0022" + +# Default way to to create a User namespace for the container +# Options are: +# `auto` Create unique User Namespace for the container. +# `host` Share host User Namespace with the container. +# +#userns = "host" + +# Number of UIDs to allocate for the automatic container creation. +# UIDs are allocated from the "container" UIDs listed in +# /etc/subuid & /etc/subgid +# +#userns_size = 65536 + +# Default way to to create a UTS namespace for the container +# Options are: +# `private` Create private UTS Namespace for the container. +# `host` Share host UTS Namespace with the container. +# +#utsns = "private" + +# List of volumes. Specified as +# "<directory-on-host>:<directory-in-container>:<options>", for example: +# "/db:/var/lib/db:ro". +# If it is empty or commented out, no volumes will be added +# +#volumes = [] + +[secrets] +#driver = "file" + +[secrets.opts] +#root = "/example/directory" + +[network] + +# Network backend determines what network driver will be used to set up and tear down container networks. +# Valid values are "cni" and "netavark". +# The default value is empty which means that it will automatically choose CNI or netavark. If there are +# already containers/images or CNI networks preset it will choose CNI. +# +# Before changing this value all containers must be stopped otherwise it is likely that +# iptables rules and network interfaces might leak on the host. A reboot will fix this. +# +network_backend = "netavark" + +# Path to directory where CNI plugin binaries are located. +# +#cni_plugin_dirs = [ +# "/usr/local/libexec/cni", +# "/usr/libexec/cni", +# "/usr/local/lib/cni", +# "/usr/lib/cni", +# "/opt/cni/bin", +#] + +# The network name of the default network to attach pods to. +# +#default_network = "podman" + +# The default subnet for the default network given in default_network. +# If a network with that name does not exist, a new network using that name and +# this subnet will be created. +# Must be a valid IPv4 CIDR prefix. +# +#default_subnet = "10.88.0.0/16" + +# DefaultSubnetPools is a list of subnets and size which are used to +# allocate subnets automatically for podman network create. +# It will iterate through the list and will pick the first free subnet +# with the given size. This is only used for ipv4 subnets, ipv6 subnets +# are always assigned randomly. +# +#default_subnet_pools = [ +# {"base" = "10.89.0.0/16", "size" = 24}, +# {"base" = "10.90.0.0/15", "size" = 24}, +# {"base" = "10.92.0.0/14", "size" = 24}, +# {"base" = "10.96.0.0/11", "size" = 24}, +# {"base" = "10.128.0.0/9", "size" = 24}, +#] + +# Path to the directory where network configuration files are located. +# For the CNI backend the default is "/etc/cni/net.d" as root +# and "$HOME/.config/cni/net.d" as rootless. +# For the netavark backend "/etc/containers/networks" is used as root +# and "$graphroot/networks" as rootless. +# +#network_config_dir = "/etc/cni/net.d/" + +# Port to use for dns forwarding daemon with netavark in rootful bridge +# mode and dns enabled. +# Using an alternate port might be useful if other dns services should +# run on the machine. +# +#dns_bind_port = 53 + +[engine] +# Index to the active service +# +#active_service = production + +# The compression format to use when pushing an image. +# Valid options are: `gzip`, `zstd` and `zstd:chunked`. +# +#compression_format = "gzip" + + +# Cgroup management implementation used for the runtime. +# Valid options "systemd" or "cgroupfs" +# +#cgroup_manager = "systemd" + +# Environment variables to pass into conmon +# +#conmon_env_vars = [ +# "PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" +#] + +# Paths to look for the conmon container manager binary +# +#conmon_path = [ +# "/usr/libexec/podman/conmon", +# "/usr/local/libexec/podman/conmon", +# "/usr/local/lib/podman/conmon", +# "/usr/bin/conmon", +# "/usr/sbin/conmon", +# "/usr/local/bin/conmon", +# "/usr/local/sbin/conmon" +#] + +# Enforces using docker.io for completing short names in Podman's compatibility +# REST API. Note that this will ignore unqualified-search-registries and +# short-name aliases defined in containers-registries.conf(5). +#compat_api_enforce_docker_hub = true + +# Specify the keys sequence used to detach a container. +# Format is a single character [a-Z] or a comma separated sequence of +# `ctrl-<value>`, where `<value>` is one of: +# `a-z`, `@`, `^`, `[`, `\`, `]`, `^` or `_` +# +#detach_keys = "ctrl-p,ctrl-q" + +# Determines whether engine will reserve ports on the host when they are +# forwarded to containers. When enabled, when ports are forwarded to containers, +# ports are held open by as long as the container is running, ensuring that +# they cannot be reused by other programs on the host. However, this can cause +# significant memory usage if a container has many ports forwarded to it. +# Disabling this can save memory. +# +#enable_port_reservation = true + +# Environment variables to be used when running the container engine (e.g., Podman, Buildah). +# For example "http_proxy=internal.proxy.company.com". +# Note these environment variables will not be used within the container. +# Set the env section under [containers] table, if you want to set environment variables for the container. +# +#env = [] + +# Define where event logs will be stored, when events_logger is "file". +#events_logfile_path="" + +# Sets the maximum size for events_logfile_path. +# The size can be b (bytes), k (kilobytes), m (megabytes), or g (gigabytes). +# The format for the size is `<number><unit>`, e.g., `1b` or `3g`. +# If no unit is included then the size will be read in bytes. +# When the limit is exceeded, the logfile will be rotated and the old one will be deleted. +# If the maximum size is set to 0, then no limit will be applied, +# and the logfile will not be rotated. +#events_logfile_max_size = "1m" + +# Selects which logging mechanism to use for container engine events. +# Valid values are `journald`, `file` and `none`. +# +#events_logger = "journald" + +# A is a list of directories which are used to search for helper binaries. +# +#helper_binaries_dir = [ +# "/usr/local/libexec/podman", +# "/usr/local/lib/podman", +# "/usr/libexec/podman", +# "/usr/lib/podman", +#] + +# Path to OCI hooks directories for automatically executed hooks. +# +#hooks_dir = [ +# "/usr/share/containers/oci/hooks.d", +#] + +# Manifest Type (oci, v2s2, or v2s1) to use when pulling, pushing, building +# container images. By default image pulled and pushed match the format of the +# source image. Building/committing defaults to OCI. +# +#image_default_format = "" + +# Default transport method for pulling and pushing for images +# +#image_default_transport = "docker://" + +# Maximum number of image layers to be copied (pulled/pushed) simultaneously. +# Not setting this field, or setting it to zero, will fall back to containers/image defaults. +# +#image_parallel_copies = 0 + +# Tells container engines how to handle the builtin image volumes. +# * bind: An anonymous named volume will be created and mounted +# into the container. +# * tmpfs: The volume is mounted onto the container as a tmpfs, +# which allows users to create content that disappears when +# the container is stopped. +# * ignore: All volumes are just ignored and no action is taken. +# +#image_volume_mode = "" + +# Default command to run the infra container +# +#infra_command = "/pause" + +# Infra (pause) container image name for pod infra containers. When running a +# pod, we start a `pause` process in a container to hold open the namespaces +# associated with the pod. This container does nothing other then sleep, +# reserving the pods resources for the lifetime of the pod. By default container +# engines run a builtin container using the pause executable. If you want override +# specify an image to pull. +# +#infra_image = "" + +# Specify the locking mechanism to use; valid values are "shm" and "file". +# Change the default only if you are sure of what you are doing, in general +# "file" is useful only on platforms where cgo is not available for using the +# faster "shm" lock type. You may need to run "podman system renumber" after +# you change the lock type. +# +#lock_type** = "shm" + +# MultiImageArchive - if true, the container engine allows for storing archives +# (e.g., of the docker-archive transport) with multiple images. By default, +# Podman creates single-image archives. +# +#multi_image_archive = "false" + +# Default engine namespace +# If engine is joined to a namespace, it will see only containers and pods +# that were created in the same namespace, and will create new containers and +# pods in that namespace. +# The default namespace is "", which corresponds to no namespace. When no +# namespace is set, all containers and pods are visible. +# +#namespace = "" + +# Path to the slirp4netns binary +# +#network_cmd_path = "" + +# Default options to pass to the slirp4netns binary. +# Valid options values are: +# +# - allow_host_loopback=true|false: Allow the slirp4netns to reach the host loopback IP (`10.0.2.2`). +# Default is false. +# - mtu=MTU: Specify the MTU to use for this network. (Default is `65520`). +# - cidr=CIDR: Specify ip range to use for this network. (Default is `10.0.2.0/24`). +# - enable_ipv6=true|false: Enable IPv6. Default is true. (Required for `outbound_addr6`). +# - outbound_addr=INTERFACE: Specify the outbound interface slirp should bind to (ipv4 traffic only). +# - outbound_addr=IPv4: Specify the outbound ipv4 address slirp should bind to. +# - outbound_addr6=INTERFACE: Specify the outbound interface slirp should bind to (ipv6 traffic only). +# - outbound_addr6=IPv6: Specify the outbound ipv6 address slirp should bind to. +# - port_handler=rootlesskit: Use rootlesskit for port forwarding. Default. +# Note: Rootlesskit changes the source IP address of incoming packets to a IP address in the container +# network namespace, usually `10.0.2.100`. If your application requires the real source IP address, +# e.g. web server logs, use the slirp4netns port handler. The rootlesskit port handler is also used for +# rootless containers when connected to user-defined networks. +# - port_handler=slirp4netns: Use the slirp4netns port forwarding, it is slower than rootlesskit but +# preserves the correct source IP address. This port handler cannot be used for user-defined networks. +# +#network_cmd_options = [] + +# Whether to use chroot instead of pivot_root in the runtime +# +#no_pivot_root = false + +# Number of locks available for containers and pods. +# If this is changed, a lock renumber must be performed (e.g. with the +# 'podman system renumber' command). +# +#num_locks = 2048 + +# Set the exit policy of the pod when the last container exits. +#pod_exit_policy = "continue" + +# Whether to pull new image before running a container +# +#pull_policy = "missing" + +# Indicates whether the application should be running in remote mode. This flag modifies the +# --remote option on container engines. Setting the flag to true will default +# `podman --remote=true` for access to the remote Podman service. +# +#remote = false + +# Default OCI runtime +# +#runtime = "crun" + +# List of the OCI runtimes that support --format=json. When json is supported +# engine will use it for reporting nicer errors. +# +#runtime_supports_json = ["crun", "runc", "kata", "runsc", "krun"] + +# List of the OCI runtimes that supports running containers with KVM Separation. +# +#runtime_supports_kvm = ["kata", "krun"] + +# List of the OCI runtimes that supports running containers without cgroups. +# +#runtime_supports_nocgroups = ["crun", "krun"] + +# Default location for storing temporary container image content. Can be overridden with the TMPDIR environment +# variable. If you specify "storage", then the location of the +# container/storage tmp directory will be used. +# image_copy_tmp_dir="/var/tmp" + +# Number of seconds to wait without a connection +# before the `podman system service` times out and exits +# +#service_timeout = 5 + +# Directory for persistent engine files (database, etc) +# By default, this will be configured relative to where the containers/storage +# stores containers +# Uncomment to change location from this default +# +#static_dir = "/var/lib/containers/storage/libpod" + +# Number of seconds to wait for container to exit before sending kill signal. +# +#stop_timeout = 10 + +# Number of seconds to wait before exit command in API process is given to. +# This mimics Docker's exec cleanup behaviour, where the default is 5 minutes (value is in seconds). +# +#exit_command_delay = 300 + +# map of service destinations +# +#[service_destinations] +# [service_destinations.production] +# URI to access the Podman service +# Examples: +# rootless "unix://run/user/$UID/podman/podman.sock" (Default) +# rootful "unix://run/podman/podman.sock (Default) +# remote rootless ssh://engineering.lab.company.com/run/user/1000/podman/podman.sock +# remote rootful ssh://root@10.10.1.136:22/run/podman/podman.sock +# +# uri = "ssh://user@production.example.com/run/user/1001/podman/podman.sock" +# Path to file containing ssh identity key +# identity = "~/.ssh/id_rsa" + +# Directory for temporary files. Must be tmpfs (wiped after reboot) +# +#tmp_dir = "/run/libpod" + +# Directory for libpod named volumes. +# By default, this will be configured relative to where containers/storage +# stores containers. +# Uncomment to change location from this default. +# +#volume_path = "/var/lib/containers/storage/volumes" + +# Default timeout (in seconds) for volume plugin operations. +# Plugins are external programs accessed via a REST API; this sets a timeout +# for requests to that API. +# A value of 0 is treated as no timeout. +#volume_plugin_timeout = 5 + +# Paths to look for a valid OCI runtime (crun, runc, kata, runsc, krun, etc) +[engine.runtimes] +#crun = [ +# "/usr/bin/crun", +# "/usr/sbin/crun", +# "/usr/local/bin/crun", +# "/usr/local/sbin/crun", +# "/sbin/crun", +# "/bin/crun", +# "/run/current-system/sw/bin/crun", +#] + +#kata = [ +# "/usr/bin/kata-runtime", +# "/usr/sbin/kata-runtime", +# "/usr/local/bin/kata-runtime", +# "/usr/local/sbin/kata-runtime", +# "/sbin/kata-runtime", +# "/bin/kata-runtime", +# "/usr/bin/kata-qemu", +# "/usr/bin/kata-fc", +#] + +#runc = [ +# "/usr/bin/runc", +# "/usr/sbin/runc", +# "/usr/local/bin/runc", +# "/usr/local/sbin/runc", +# "/sbin/runc", +# "/bin/runc", +# "/usr/lib/cri-o-runc/sbin/runc", +#] + +#runsc = [ +# "/usr/bin/runsc", +# "/usr/sbin/runsc", +# "/usr/local/bin/runsc", +# "/usr/local/sbin/runsc", +# "/bin/runsc", +# "/sbin/runsc", +# "/run/current-system/sw/bin/runsc", +#] + +#krun = [ +# "/usr/bin/krun", +# "/usr/local/bin/krun", +#] + +[engine.volume_plugins] +#testplugin = "/run/podman/plugins/test.sock" + +[machine] +# Number of CPU's a machine is created with. +# +#cpus=1 + +# The size of the disk in GB created when init-ing a podman-machine VM. +# +#disk_size=10 + +# Default image URI when creating a new VM using `podman machine init`. +# Options: On Linux/Mac, `testing`, `stable`, `next`. On Windows, the major +# version of the OS (e.g `36`) for Fedora 36. For all platforms you can +# alternatively specify a custom download URL to an image. Container engines +# translate URIs $OS and $ARCH to the native OS and ARCH. URI +# "https://example.com/$OS/$ARCH/foobar.ami" becomes +# "https://example.com/linux/amd64/foobar.ami" on a Linux AMD machine. +# The default value is `testing`. +# +# image = "testing" + +# Memory in MB a machine is created with. +# +#memory=2048 + +# The username to use and create on the podman machine OS for rootless +# container access. +# +#user = "core" + +# Host directories to be mounted as volumes into the VM by default. +# Environment variables like $HOME as well as complete paths are supported for +# the source and destination. An optional third field `:ro` can be used to +# tell the container engines to mount the volume readonly. +# +# volumes = [ +# "$HOME:$HOME", +#] + +# The [machine] table MUST be the last entry in this file. +# (Unless another table is added) +# TOML does not provide a way to end a table other than a further table being +# defined, so every key hereafter will be part of [machine] and not the +# main config. diff --git a/data/templates/frr/eigrpd.frr.j2 b/data/templates/frr/eigrpd.frr.j2 index 67f8a3ad1..3038a0b1d 100644 --- a/data/templates/frr/eigrpd.frr.j2 +++ b/data/templates/frr/eigrpd.frr.j2 @@ -1,21 +1,21 @@ -!
-router eigrp {{ local_as }} {{ 'vrf ' ~ vrf if vrf is vyos_defined }}
-{% if maximum_paths is vyos_defined %}
-maximum-paths {{ maximum_paths }}
-{% endif %}
-{% if metric.weights is vyos_defined %}
-metric weights {{ metric.weights }}
-{% endif %}
-{% if network is vyos_defined %}
-{% for net in network %}
-network {{ net }}
-{% endfor %}
-{% endif %}
-{% if redistribute is vyos_defined %}
-{% for protocol in redistribute %}
-redistribute {{ protocol }}
-{% endfor %}
-{% endif %}
-{% if variance is vyos_defined %}
-variance {{ variance }}
+! +router eigrp {{ local_as }} {{ 'vrf ' ~ vrf if vrf is vyos_defined }} +{% if maximum_paths is vyos_defined %} +maximum-paths {{ maximum_paths }} +{% endif %} +{% if metric.weights is vyos_defined %} +metric weights {{ metric.weights }} +{% endif %} +{% if network is vyos_defined %} +{% for net in network %} +network {{ net }} +{% endfor %} +{% endif %} +{% if redistribute is vyos_defined %} +{% for protocol in redistribute %} +redistribute {{ protocol }} +{% endfor %} +{% endif %} +{% if variance is vyos_defined %} +variance {{ variance }} {% endif %}
\ No newline at end of file diff --git a/data/templates/system/sysctl.conf.j2 b/data/templates/system/sysctl.conf.j2 index 59a19e157..db699c3d8 100644 --- a/data/templates/system/sysctl.conf.j2 +++ b/data/templates/system/sysctl.conf.j2 @@ -1,7 +1,7 @@ -# autogenerated by system_sysctl.py
-
-{% if parameter is vyos_defined %}
-{% for k, v in parameter.items() %}
-{{ k }} = {{ v.value }}
-{% endfor %}
-{% endif %}
+# autogenerated by system_sysctl.py + +{% if parameter is vyos_defined %} +{% for k, v in parameter.items() %} +{{ k }} = {{ v.value }} +{% endfor %} +{% endif %} diff --git a/interface-definitions/include/constraint/host-name.xml.i b/interface-definitions/include/constraint/host-name.xml.i index cc9740c16..5943772a2 100644 --- a/interface-definitions/include/constraint/host-name.xml.i +++ b/interface-definitions/include/constraint/host-name.xml.i @@ -1,3 +1,3 @@ -<!-- include start from constraint/host-name.xml.i -->
-<regex>[A-Za-z0-9][-.A-Za-z0-9]*[A-Za-z0-9]</regex>
-<!-- include end -->
+<!-- include start from constraint/host-name.xml.i --> +<regex>[A-Za-z0-9][-.A-Za-z0-9]*[A-Za-z0-9]</regex> +<!-- include end --> diff --git a/interface-definitions/include/policy/route-common.xml.i b/interface-definitions/include/policy/route-common.xml.i index b8581b03e..e412fe58e 100644 --- a/interface-definitions/include/policy/route-common.xml.i +++ b/interface-definitions/include/policy/route-common.xml.i @@ -1,257 +1,257 @@ -<!-- include start from policy/route-common.xml.i -->
-#include <include/policy/route-rule-action.xml.i>
-#include <include/generic-description.xml.i>
-#include <include/firewall/firewall-mark.xml.i>
-#include <include/generic-disable-node.xml.i>
-<node name="fragment">
- <properties>
- <help>IP fragment match</help>
- </properties>
- <children>
- <leafNode name="match-frag">
- <properties>
- <help>Second and further fragments of fragmented packets</help>
- <valueless/>
- </properties>
- </leafNode>
- <leafNode name="match-non-frag">
- <properties>
- <help>Head fragments or unfragmented packets</help>
- <valueless/>
- </properties>
- </leafNode>
- </children>
-</node>
-<node name="ipsec">
- <properties>
- <help>Inbound IPsec packets</help>
- </properties>
- <children>
- <leafNode name="match-ipsec">
- <properties>
- <help>Inbound IPsec packets</help>
- <valueless/>
- </properties>
- </leafNode>
- <leafNode name="match-none">
- <properties>
- <help>Inbound non-IPsec packets</help>
- <valueless/>
- </properties>
- </leafNode>
- </children>
-</node>
-<node name="limit">
- <properties>
- <help>Rate limit using a token bucket filter</help>
- </properties>
- <children>
- <leafNode name="burst">
- <properties>
- <help>Maximum number of packets to allow in excess of rate</help>
- <valueHelp>
- <format>u32:0-4294967295</format>
- <description>Maximum number of packets to allow in excess of rate</description>
- </valueHelp>
- <constraint>
- <validator name="numeric" argument="--range 0-4294967295"/>
- </constraint>
- </properties>
- </leafNode>
- <leafNode name="rate">
- <properties>
- <help>Maximum average matching rate</help>
- <valueHelp>
- <format>u32:0-4294967295</format>
- <description>Maximum average matching rate</description>
- </valueHelp>
- <constraint>
- <validator name="numeric" argument="--range 0-4294967295"/>
- </constraint>
- </properties>
- </leafNode>
- </children>
-</node>
-#include <include/firewall/log.xml.i>
-<leafNode name="protocol">
- <properties>
- <help>Protocol to match (protocol name, number, or "all")</help>
- <completionHelp>
- <script>cat /etc/protocols | sed -e '/^#.*/d' | awk '{ print $1 }'</script>
- </completionHelp>
- <valueHelp>
- <format>all</format>
- <description>All IP protocols</description>
- </valueHelp>
- <valueHelp>
- <format>tcp_udp</format>
- <description>Both TCP and UDP</description>
- </valueHelp>
- <valueHelp>
- <format>0-255</format>
- <description>IP protocol number</description>
- </valueHelp>
- <valueHelp>
- <format>!<protocol></format>
- <description>IP protocol number</description>
- </valueHelp>
- <constraint>
- <validator name="ip-protocol"/>
- </constraint>
- </properties>
- <defaultValue>all</defaultValue>
-</leafNode>
-<node name="recent">
- <properties>
- <help>Parameters for matching recently seen sources</help>
- </properties>
- <children>
- <leafNode name="count">
- <properties>
- <help>Source addresses seen more than N times</help>
- <valueHelp>
- <format>u32:1-255</format>
- <description>Source addresses seen more than N times</description>
- </valueHelp>
- <constraint>
- <validator name="numeric" argument="--range 1-255"/>
- </constraint>
- </properties>
- </leafNode>
- <leafNode name="time">
- <properties>
- <help>Source addresses seen in the last N seconds</help>
- <valueHelp>
- <format>u32:0-4294967295</format>
- <description>Source addresses seen in the last N seconds</description>
- </valueHelp>
- <constraint>
- <validator name="numeric" argument="--range 0-4294967295"/>
- </constraint>
- </properties>
- </leafNode>
- </children>
-</node>
-<node name="set">
- <properties>
- <help>Packet modifications</help>
- </properties>
- <children>
- <leafNode name="connection-mark">
- <properties>
- <help>Connection marking</help>
- <valueHelp>
- <format>u32:0-2147483647</format>
- <description>Connection marking</description>
- </valueHelp>
- <constraint>
- <validator name="numeric" argument="--range 0-2147483647"/>
- </constraint>
- </properties>
- </leafNode>
- <leafNode name="dscp">
- <properties>
- <help>Packet Differentiated Services Codepoint (DSCP)</help>
- <valueHelp>
- <format>u32:0-63</format>
- <description>DSCP number</description>
- </valueHelp>
- <constraint>
- <validator name="numeric" argument="--range 0-63"/>
- </constraint>
- </properties>
- </leafNode>
- <leafNode name="mark">
- <properties>
- <help>Packet marking</help>
- <valueHelp>
- <format>u32:1-2147483647</format>
- <description>Packet marking</description>
- </valueHelp>
- <constraint>
- <validator name="numeric" argument="--range 1-2147483647"/>
- </constraint>
- </properties>
- </leafNode>
- <leafNode name="table">
- <properties>
- <help>Routing table to forward packet with</help>
- <valueHelp>
- <format>u32:1-200</format>
- <description>Table number</description>
- </valueHelp>
- <valueHelp>
- <format>main</format>
- <description>Main table</description>
- </valueHelp>
- <constraint>
- <validator name="numeric" argument="--range 1-200"/>
- <regex>(main)</regex>
- </constraint>
- <completionHelp>
- <list>main</list>
- <path>protocols static table</path>
- </completionHelp>
- </properties>
- </leafNode>
- <leafNode name="tcp-mss">
- <properties>
- <help>TCP Maximum Segment Size</help>
- <valueHelp>
- <format>u32:500-1460</format>
- <description>Explicitly set TCP MSS value</description>
- </valueHelp>
- <constraint>
- <validator name="numeric" argument="--range 500-1460"/>
- </constraint>
- </properties>
- </leafNode>
- </children>
-</node>
-#include <include/firewall/state.xml.i>
-#include <include/firewall/tcp-flags.xml.i>
-#include <include/firewall/tcp-mss.xml.i>
-<node name="time">
- <properties>
- <help>Time to match rule</help>
- </properties>
- <children>
- <leafNode name="monthdays">
- <properties>
- <help>Monthdays to match rule on</help>
- </properties>
- </leafNode>
- <leafNode name="startdate">
- <properties>
- <help>Date to start matching rule</help>
- </properties>
- </leafNode>
- <leafNode name="starttime">
- <properties>
- <help>Time of day to start matching rule</help>
- </properties>
- </leafNode>
- <leafNode name="stopdate">
- <properties>
- <help>Date to stop matching rule</help>
- </properties>
- </leafNode>
- <leafNode name="stoptime">
- <properties>
- <help>Time of day to stop matching rule</help>
- </properties>
- </leafNode>
- <leafNode name="utc">
- <properties>
- <help>Interpret times for startdate, stopdate, starttime and stoptime to be UTC</help>
- <valueless/>
- </properties>
- </leafNode>
- <leafNode name="weekdays">
- <properties>
- <help>Weekdays to match rule on</help>
- </properties>
- </leafNode>
- </children>
-</node>
-<!-- include end -->
+<!-- include start from policy/route-common.xml.i --> +#include <include/policy/route-rule-action.xml.i> +#include <include/generic-description.xml.i> +#include <include/firewall/firewall-mark.xml.i> +#include <include/generic-disable-node.xml.i> +<node name="fragment"> + <properties> + <help>IP fragment match</help> + </properties> + <children> + <leafNode name="match-frag"> + <properties> + <help>Second and further fragments of fragmented packets</help> + <valueless/> + </properties> + </leafNode> + <leafNode name="match-non-frag"> + <properties> + <help>Head fragments or unfragmented packets</help> + <valueless/> + </properties> + </leafNode> + </children> +</node> +<node name="ipsec"> + <properties> + <help>Inbound IPsec packets</help> + </properties> + <children> + <leafNode name="match-ipsec"> + <properties> + <help>Inbound IPsec packets</help> + <valueless/> + </properties> + </leafNode> + <leafNode name="match-none"> + <properties> + <help>Inbound non-IPsec packets</help> + <valueless/> + </properties> + </leafNode> + </children> +</node> +<node name="limit"> + <properties> + <help>Rate limit using a token bucket filter</help> + </properties> + <children> + <leafNode name="burst"> + <properties> + <help>Maximum number of packets to allow in excess of rate</help> + <valueHelp> + <format>u32:0-4294967295</format> + <description>Maximum number of packets to allow in excess of rate</description> + </valueHelp> + <constraint> + <validator name="numeric" argument="--range 0-4294967295"/> + </constraint> + </properties> + </leafNode> + <leafNode name="rate"> + <properties> + <help>Maximum average matching rate</help> + <valueHelp> + <format>u32:0-4294967295</format> + <description>Maximum average matching rate</description> + </valueHelp> + <constraint> + <validator name="numeric" argument="--range 0-4294967295"/> + </constraint> + </properties> + </leafNode> + </children> +</node> +#include <include/firewall/log.xml.i> +<leafNode name="protocol"> + <properties> + <help>Protocol to match (protocol name, number, or "all")</help> + <completionHelp> + <script>cat /etc/protocols | sed -e '/^#.*/d' | awk '{ print $1 }'</script> + </completionHelp> + <valueHelp> + <format>all</format> + <description>All IP protocols</description> + </valueHelp> + <valueHelp> + <format>tcp_udp</format> + <description>Both TCP and UDP</description> + </valueHelp> + <valueHelp> + <format>0-255</format> + <description>IP protocol number</description> + </valueHelp> + <valueHelp> + <format>!<protocol></format> + <description>IP protocol number</description> + </valueHelp> + <constraint> + <validator name="ip-protocol"/> + </constraint> + </properties> + <defaultValue>all</defaultValue> +</leafNode> +<node name="recent"> + <properties> + <help>Parameters for matching recently seen sources</help> + </properties> + <children> + <leafNode name="count"> + <properties> + <help>Source addresses seen more than N times</help> + <valueHelp> + <format>u32:1-255</format> + <description>Source addresses seen more than N times</description> + </valueHelp> + <constraint> + <validator name="numeric" argument="--range 1-255"/> + </constraint> + </properties> + </leafNode> + <leafNode name="time"> + <properties> + <help>Source addresses seen in the last N seconds</help> + <valueHelp> + <format>u32:0-4294967295</format> + <description>Source addresses seen in the last N seconds</description> + </valueHelp> + <constraint> + <validator name="numeric" argument="--range 0-4294967295"/> + </constraint> + </properties> + </leafNode> + </children> +</node> +<node name="set"> + <properties> + <help>Packet modifications</help> + </properties> + <children> + <leafNode name="connection-mark"> + <properties> + <help>Connection marking</help> + <valueHelp> + <format>u32:0-2147483647</format> + <description>Connection marking</description> + </valueHelp> + <constraint> + <validator name="numeric" argument="--range 0-2147483647"/> + </constraint> + </properties> + </leafNode> + <leafNode name="dscp"> + <properties> + <help>Packet Differentiated Services Codepoint (DSCP)</help> + <valueHelp> + <format>u32:0-63</format> + <description>DSCP number</description> + </valueHelp> + <constraint> + <validator name="numeric" argument="--range 0-63"/> + </constraint> + </properties> + </leafNode> + <leafNode name="mark"> + <properties> + <help>Packet marking</help> + <valueHelp> + <format>u32:1-2147483647</format> + <description>Packet marking</description> + </valueHelp> + <constraint> + <validator name="numeric" argument="--range 1-2147483647"/> + </constraint> + </properties> + </leafNode> + <leafNode name="table"> + <properties> + <help>Routing table to forward packet with</help> + <valueHelp> + <format>u32:1-200</format> + <description>Table number</description> + </valueHelp> + <valueHelp> + <format>main</format> + <description>Main table</description> + </valueHelp> + <constraint> + <validator name="numeric" argument="--range 1-200"/> + <regex>(main)</regex> + </constraint> + <completionHelp> + <list>main</list> + <path>protocols static table</path> + </completionHelp> + </properties> + </leafNode> + <leafNode name="tcp-mss"> + <properties> + <help>TCP Maximum Segment Size</help> + <valueHelp> + <format>u32:500-1460</format> + <description>Explicitly set TCP MSS value</description> + </valueHelp> + <constraint> + <validator name="numeric" argument="--range 500-1460"/> + </constraint> + </properties> + </leafNode> + </children> +</node> +#include <include/firewall/state.xml.i> +#include <include/firewall/tcp-flags.xml.i> +#include <include/firewall/tcp-mss.xml.i> +<node name="time"> + <properties> + <help>Time to match rule</help> + </properties> + <children> + <leafNode name="monthdays"> + <properties> + <help>Monthdays to match rule on</help> + </properties> + </leafNode> + <leafNode name="startdate"> + <properties> + <help>Date to start matching rule</help> + </properties> + </leafNode> + <leafNode name="starttime"> + <properties> + <help>Time of day to start matching rule</help> + </properties> + </leafNode> + <leafNode name="stopdate"> + <properties> + <help>Date to stop matching rule</help> + </properties> + </leafNode> + <leafNode name="stoptime"> + <properties> + <help>Time of day to stop matching rule</help> + </properties> + </leafNode> + <leafNode name="utc"> + <properties> + <help>Interpret times for startdate, stopdate, starttime and stoptime to be UTC</help> + <valueless/> + </properties> + </leafNode> + <leafNode name="weekdays"> + <properties> + <help>Weekdays to match rule on</help> + </properties> + </leafNode> + </children> +</node> +<!-- include end --> diff --git a/interface-definitions/include/protocol-tcp-udp.xml.i b/interface-definitions/include/protocol-tcp-udp.xml.i index d7e6752ad..c186c026a 100644 --- a/interface-definitions/include/protocol-tcp-udp.xml.i +++ b/interface-definitions/include/protocol-tcp-udp.xml.i @@ -1,22 +1,22 @@ -<!-- include start from snmp/protocol.xml.i -->
-<leafNode name="protocol">
- <properties>
- <help>Protocol to be used (TCP/UDP)</help>
- <completionHelp>
- <list>udp tcp</list>
- </completionHelp>
- <valueHelp>
- <format>udp</format>
- <description>Listen protocol UDP</description>
- </valueHelp>
- <valueHelp>
- <format>tcp</format>
- <description>Listen protocol TCP</description>
- </valueHelp>
- <constraint>
- <regex>(udp|tcp)</regex>
- </constraint>
- </properties>
- <defaultValue>udp</defaultValue>
-</leafNode>
-<!-- include end -->
+<!-- include start from snmp/protocol.xml.i --> +<leafNode name="protocol"> + <properties> + <help>Protocol to be used (TCP/UDP)</help> + <completionHelp> + <list>udp tcp</list> + </completionHelp> + <valueHelp> + <format>udp</format> + <description>Listen protocol UDP</description> + </valueHelp> + <valueHelp> + <format>tcp</format> + <description>Listen protocol TCP</description> + </valueHelp> + <constraint> + <regex>(udp|tcp)</regex> + </constraint> + </properties> + <defaultValue>udp</defaultValue> +</leafNode> +<!-- include end --> diff --git a/interface-definitions/include/rip/version.xml.i b/interface-definitions/include/rip/version.xml.i index a35350aee..61458b28e 100644 --- a/interface-definitions/include/rip/version.xml.i +++ b/interface-definitions/include/rip/version.xml.i @@ -1,18 +1,18 @@ -<!-- include start from rip/version.xml.i -->
-<leafNode name="version">
- <properties>
- <help>Limit RIP protocol version</help>
- <valueHelp>
- <format>1</format>
- <description>Allow RIPv1 only</description>
- </valueHelp>
- <valueHelp>
- <format>2</format>
- <description>Allow RIPv2 only</description>
- </valueHelp>
- <constraint>
- <validator name="numeric" argument="--range 1-2"/>
- </constraint>
- </properties>
-</leafNode>
-<!-- include end -->
+<!-- include start from rip/version.xml.i --> +<leafNode name="version"> + <properties> + <help>Limit RIP protocol version</help> + <valueHelp> + <format>1</format> + <description>Allow RIPv1 only</description> + </valueHelp> + <valueHelp> + <format>2</format> + <description>Allow RIPv2 only</description> + </valueHelp> + <constraint> + <validator name="numeric" argument="--range 1-2"/> + </constraint> + </properties> +</leafNode> +<!-- include end --> diff --git a/op-mode-definitions/generate-system-login-user.xml.in b/op-mode-definitions/generate-system-login-user.xml.in index 868bbcd46..bd80840df 100755 --- a/op-mode-definitions/generate-system-login-user.xml.in +++ b/op-mode-definitions/generate-system-login-user.xml.in @@ -1,90 +1,90 @@ -<?xml version="1.0"?>
-<interfaceDefinition>
- <node name="generate">
- <children>
- <node name="system">
- <properties>
- <help>Generate system related parameters</help>
- </properties>
- <children>
- <node name="login">
- <properties>
- <help>Generate system login related parameters</help>
- </properties>
- <children>
- <tagNode name="username">
- <properties>
- <help>Username used for authentication</help>
- <completionHelp>
- <path>system login user</path>
- </completionHelp>
- </properties>
- <children>
- <node name="otp-key">
- <properties>
- <help>Generate OpenConnect OTP token</help>
- </properties>
- <children>
- <node name="hotp-time">
- <properties>
- <help>HOTP time-based token</help>
- </properties>
- <command>sudo ${vyos_op_scripts_dir}/generate_system_login_user.py --username "$5"</command>
- <children>
- <tagNode name="rate-limit">
- <properties>
- <help>Duration of single time interval</help>
- </properties>
- <command>sudo ${vyos_op_scripts_dir}/generate_system_login_user.py --username "$5" --rate-limit "$9"</command>
- <children>
- <tagNode name="rate-time">
- <properties>
- <help>The number of digits in the one-time password</help>
- </properties>
- <command>sudo ${vyos_op_scripts_dir}/generate_system_login_user.py --username "$5" --rate-limit "$9" --rate-time "${11}" </command>
- <children>
- <tagNode name="window-size">
- <properties>
- <help>The number of digits in the one-time password</help>
- </properties>
- <command>sudo ${vyos_op_scripts_dir}/generate_system_login_user.py --username "$5" --rate-limit "$9" --rate-time "${11}" --window-size "${13}"</command>
- </tagNode>
- </children>
- </tagNode>
- </children>
- </tagNode>
- <tagNode name="window-size">
- <properties>
- <help>The number of digits in the one-time password</help>
- </properties>
- <command>sudo ${vyos_op_scripts_dir}/generate_system_login_user.py --username "$5" --window-size "${9}"</command>
- <children>
- <tagNode name="rate-limit">
- <properties>
- <help>Duration of single time interval</help>
- </properties>
- <command>sudo ${vyos_op_scripts_dir}/generate_system_login_user.py --username "$5" --rate-limit "${11}" --window-size "${9}"</command>
- <children>
- <tagNode name="rate-time">
- <properties>
- <help>Duration of single time interval</help>
- </properties>
- <command>sudo ${vyos_op_scripts_dir}/generate_system_login_user.py --username "$5" --rate-limit "${11}" --rate-time "${13}" --window-size "${9}"</command>
- </tagNode>
- </children>
- </tagNode>
- </children>
- </tagNode>
- </children>
- </node>
- </children>
- </node>
- </children>
- </tagNode>
- </children>
- </node>
- </children>
- </node>
- </children>
- </node>
-</interfaceDefinition>
+<?xml version="1.0"?> +<interfaceDefinition> + <node name="generate"> + <children> + <node name="system"> + <properties> + <help>Generate system related parameters</help> + </properties> + <children> + <node name="login"> + <properties> + <help>Generate system login related parameters</help> + </properties> + <children> + <tagNode name="username"> + <properties> + <help>Username used for authentication</help> + <completionHelp> + <path>system login user</path> + </completionHelp> + </properties> + <children> + <node name="otp-key"> + <properties> + <help>Generate OpenConnect OTP token</help> + </properties> + <children> + <node name="hotp-time"> + <properties> + <help>HOTP time-based token</help> + </properties> + <command>sudo ${vyos_op_scripts_dir}/generate_system_login_user.py --username "$5"</command> + <children> + <tagNode name="rate-limit"> + <properties> + <help>Duration of single time interval</help> + </properties> + <command>sudo ${vyos_op_scripts_dir}/generate_system_login_user.py --username "$5" --rate-limit "$9"</command> + <children> + <tagNode name="rate-time"> + <properties> + <help>The number of digits in the one-time password</help> + </properties> + <command>sudo ${vyos_op_scripts_dir}/generate_system_login_user.py --username "$5" --rate-limit "$9" --rate-time "${11}" </command> + <children> + <tagNode name="window-size"> + <properties> + <help>The number of digits in the one-time password</help> + </properties> + <command>sudo ${vyos_op_scripts_dir}/generate_system_login_user.py --username "$5" --rate-limit "$9" --rate-time "${11}" --window-size "${13}"</command> + </tagNode> + </children> + </tagNode> + </children> + </tagNode> + <tagNode name="window-size"> + <properties> + <help>The number of digits in the one-time password</help> + </properties> + <command>sudo ${vyos_op_scripts_dir}/generate_system_login_user.py --username "$5" --window-size "${9}"</command> + <children> + <tagNode name="rate-limit"> + <properties> + <help>Duration of single time interval</help> + </properties> + <command>sudo ${vyos_op_scripts_dir}/generate_system_login_user.py --username "$5" --rate-limit "${11}" --window-size "${9}"</command> + <children> + <tagNode name="rate-time"> + <properties> + <help>Duration of single time interval</help> + </properties> + <command>sudo ${vyos_op_scripts_dir}/generate_system_login_user.py --username "$5" --rate-limit "${11}" --rate-time "${13}" --window-size "${9}"</command> + </tagNode> + </children> + </tagNode> + </children> + </tagNode> + </children> + </node> + </children> + </node> + </children> + </tagNode> + </children> + </node> + </children> + </node> + </children> + </node> +</interfaceDefinition> |