summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--python/vyos/configdict.py377
1 files changed, 264 insertions, 113 deletions
diff --git a/python/vyos/configdict.py b/python/vyos/configdict.py
index 2ce8a795f..dea8a5d01 100644
--- a/python/vyos/configdict.py
+++ b/python/vyos/configdict.py
@@ -18,7 +18,12 @@ A library for retrieving value dicts from VyOS configs in a declarative fashion.
"""
+from enum import Enum
+from copy import deepcopy
+
from vyos import ConfigError
+from vyos.ifconfig import Interface
+
def retrieve_config(path_hash, base_path, config):
"""
@@ -98,192 +103,338 @@ def get_ethertype(ethertype_val):
raise ConfigError('invalid ethertype "{}"'.format(ethertype_val))
-def vlan_to_dict(conf):
+vlan_default = {
+ 'address': [],
+ 'address_remove': [],
+ 'description': '',
+ 'dhcp_client_id': '',
+ 'dhcp_hostname': '',
+ 'dhcp_vendor_class_id': '',
+ 'dhcpv6_prm_only': False,
+ 'dhcpv6_temporary': False,
+ 'disable': False,
+ 'disable_link_detect': 1,
+ 'egress_qos': '',
+ 'egress_qos_changed': False,
+ 'ip_disable_arp_filter': 1,
+ 'ip_enable_arp_accept': 0,
+ 'ip_enable_arp_announce': 0,
+ 'ip_enable_arp_ignore': 0,
+ 'ip_proxy_arp': 0,
+ 'ipv6_autoconf': 0,
+ 'ipv6_eui64_prefix': [],
+ 'ipv6_eui64_prefix_remove': [],
+ 'ipv6_forwarding': 1,
+ 'ipv6_dup_addr_detect': 1,
+ 'ingress_qos': '',
+ 'ingress_qos_changed': False,
+ 'mac': '',
+ 'mtu': 1500,
+ 'vif_c': [],
+ 'vif_c_remove': [],
+ 'vrf': ''
+}
+
+# see: https://docs.python.org/3/library/enum.html#functional-api
+disable = Enum('disable','none was now both')
+
+def disable_state(conf, check=[3,5,7]):
+ """
+ return if and how a particual section of the configuration is has disable'd
+ using "disable" including if it was disabled by one of its parent.
+
+ check: a list of the level we should check, here 7,5 and 3
+ interfaces ethernet eth1 vif-s 1 vif-c 2 disable
+ interfaces ethernet eth1 vif 1 disable
+ interfaces ethernet eth1 disable
+
+ it returns an enum (none, was, now, both)
+ """
+
+ # save where we are in the config
+ current_level = conf.get_level()
+
+ # logic to figure out if the interface (or one of it parent is disabled)
+ eff_disable = False
+ act_disable = False
+
+ levels = check[:]
+ working_level = current_level[:]
+
+ while levels:
+ position = len(working_level)
+ if not position:
+ break
+ if position not in levels:
+ working_level = working_level[:-1]
+ continue
+
+ levels.remove(position)
+ conf.set_level(working_level)
+ working_level = working_level[:-1]
+
+ eff_disable = eff_disable or conf.exists_effective('disable')
+ act_disable = act_disable or conf.exists('disable')
+
+ conf.set_level(current_level)
+
+ # how the disabling changed
+ if eff_disable and act_disable:
+ return disable.both
+ if eff_disable and not eff_disable:
+ return disable.was
+ if not eff_disable and act_disable:
+ return disable.now
+ return disable.none
+
+
+def intf_to_dict(conf, default):
"""
Common used function which will extract VLAN related information from config
and represent the result as Python dictionary.
Function call's itself recursively if a vif-s/vif-c pair is detected.
"""
- vlan = {
- 'id': conf.get_level()[-1], # get the '100' in 'interfaces bonding bond0 vif-s 100'
- 'address': [],
- 'address_remove': [],
- 'description': '',
- 'dhcp_client_id': '',
- 'dhcp_hostname': '',
- 'dhcp_vendor_class_id': '',
- 'dhcpv6_prm_only': False,
- 'dhcpv6_temporary': False,
- 'disable': False,
- 'disable_link_detect': 1,
- 'egress_qos': '',
- 'egress_qos_changed': False,
- 'ip_disable_arp_filter': 1,
- 'ip_enable_arp_accept': 0,
- 'ip_enable_arp_announce': 0,
- 'ip_enable_arp_ignore': 0,
- 'ip_proxy_arp': 0,
- 'ipv6_autoconf': 0,
- 'ipv6_eui64_prefix': [],
- 'ipv6_eui64_prefix_remove': [],
- 'ipv6_forwarding': 1,
- 'ipv6_dup_addr_detect': 1,
- 'ingress_qos': '',
- 'ingress_qos_changed': False,
- 'mac': '',
- 'mtu': 1500,
- 'vrf': ''
- }
+
+ intf = deepcopy(default)
+
# retrieve configured interface addresses
if conf.exists('address'):
- vlan['address'] = conf.return_values('address')
-
- # Determine interface addresses (currently effective) - to determine which
- # address is no longer valid and needs to be removed from the bond
- eff_addr = conf.return_effective_values('address')
- act_addr = conf.return_values('address')
- vlan['address_remove'] = list_diff(eff_addr, act_addr)
+ intf['address'] = conf.return_values('address')
# retrieve interface description
if conf.exists('description'):
- vlan['description'] = conf.return_value('description')
+ intf['description'] = conf.return_value('description')
# get DHCP client identifier
if conf.exists('dhcp-options client-id'):
- vlan['dhcp_client_id'] = conf.return_value('dhcp-options client-id')
+ intf['dhcp_client_id'] = conf.return_value('dhcp-options client-id')
# DHCP client host name (overrides the system host name)
if conf.exists('dhcp-options host-name'):
- vlan['dhcp_hostname'] = conf.return_value('dhcp-options host-name')
+ intf['dhcp_hostname'] = conf.return_value('dhcp-options host-name')
# DHCP client vendor identifier
if conf.exists('dhcp-options vendor-class-id'):
- vlan['dhcp_vendor_class_id'] = conf.return_value('dhcp-options vendor-class-id')
+ intf['dhcp_vendor_class_id'] = conf.return_value(
+ 'dhcp-options vendor-class-id')
# DHCPv6 only acquire config parameters, no address
if conf.exists('dhcpv6-options parameters-only'):
- vlan['dhcpv6_prm_only'] = True
+ intf['dhcpv6_prm_only'] = True
# DHCPv6 temporary IPv6 address
if conf.exists('dhcpv6-options temporary'):
- vlan['dhcpv6_temporary'] = True
+ intf['dhcpv6_temporary'] = True
# ignore link state changes
if conf.exists('disable-link-detect'):
- vlan['disable_link_detect'] = 2
-
- # disable VLAN interface
- if conf.exists('disable'):
- vlan['disable'] = True
+ intf['disable_link_detect'] = 2
# ARP filter configuration
if conf.exists('ip disable-arp-filter'):
- vlan['ip_disable_arp_filter'] = 0
+ intf['ip_disable_arp_filter'] = 0
# ARP enable accept
if conf.exists('ip enable-arp-accept'):
- vlan['ip_enable_arp_accept'] = 1
+ intf['ip_enable_arp_accept'] = 1
# ARP enable announce
if conf.exists('ip enable-arp-announce'):
- vlan['ip_enable_arp_announce'] = 1
+ intf['ip_enable_arp_announce'] = 1
# ARP enable ignore
if conf.exists('ip enable-arp-ignore'):
- vlan['ip_enable_arp_ignore'] = 1
+ intf['ip_enable_arp_ignore'] = 1
# Enable Proxy ARP
if conf.exists('ip enable-proxy-arp'):
- vlan['ip_proxy_arp'] = 1
+ intf['ip_proxy_arp'] = 1
# Enable acquisition of IPv6 address using stateless autoconfig (SLAAC)
if conf.exists('ipv6 address autoconf'):
- vlan['ipv6_autoconf'] = 1
+ intf['ipv6_autoconf'] = 1
# Get prefixes for IPv6 addressing based on MAC address (EUI-64)
if conf.exists('ipv6 address eui64'):
- vlan['ipv6_eui64_prefix'] = conf.return_values('ipv6 address eui64')
-
- # Determine currently effective EUI64 addresses - to determine which
- # address is no longer valid and needs to be removed
- eff_addr = conf.return_effective_values('ipv6 address eui64')
- vlan['ipv6_eui64_prefix_remove'] = list_diff(eff_addr, vlan['ipv6_eui64_prefix'])
-
- # Remove the default link-local address if set.
- if conf.exists('ipv6 address no-default-link-local'):
- vlan['ipv6_eui64_prefix_remove'].append('fe80::/64')
- else:
- # add the link-local by default to make IPv6 work
- vlan['ipv6_eui64_prefix'].append('fe80::/64')
+ intf['ipv6_eui64_prefix'] = conf.return_values('ipv6 address eui64')
# Disable IPv6 forwarding on this interface
if conf.exists('ipv6 disable-forwarding'):
- vlan['ipv6_forwarding'] = 0
-
- # IPv6 Duplicate Address Detection (DAD) tries
- if conf.exists('ipv6 dup-addr-detect-transmits'):
- vlan['ipv6_dup_addr_detect'] = int(conf.return_value('ipv6 dup-addr-detect-transmits'))
+ intf['ipv6_forwarding'] = 0
# Media Access Control (MAC) address
if conf.exists('mac'):
- vlan['mac'] = conf.return_value('mac')
- # always recreate EUI64 addresses if mac is set
- # I'm not sure how to check if a vlan interface exists or how to get its current mac.
- vlan['ipv6_eui64_prefix_remove'] += vlan['ipv6_eui64_prefix']
+ intf['mac'] = conf.return_value('mac')
+
+ # IPv6 Duplicate Address Detection (DAD) tries
+ if conf.exists('ipv6 dup-addr-detect-transmits'):
+ intf['ipv6_dup_addr_detect'] = int(
+ conf.return_value('ipv6 dup-addr-detect-transmits'))
# Maximum Transmission Unit (MTU)
if conf.exists('mtu'):
- vlan['mtu'] = int(conf.return_value('mtu'))
+ intf['mtu'] = int(conf.return_value('mtu'))
# retrieve VRF instance
if conf.exists('vrf'):
- vlan['vrf'] = conf.return_value('vrf')
+ intf['vrf'] = conf.return_value('vrf')
- # VLAN egress QoS
+ # egress QoS
if conf.exists('egress-qos'):
- vlan['egress_qos'] = conf.return_value('egress-qos')
+ intf['egress_qos'] = conf.return_value('egress-qos')
# egress changes QoS require VLAN interface recreation
if conf.return_effective_value('egress-qos'):
- if vlan['egress_qos'] != conf.return_effective_value('egress-qos'):
- vlan['egress_qos_changed'] = True
+ if intf['egress_qos'] != conf.return_effective_value('egress-qos'):
+ intf['egress_qos_changed'] = True
- # VLAN ingress QoS
+ # ingress QoS
if conf.exists('ingress-qos'):
- vlan['ingress_qos'] = conf.return_value('ingress-qos')
+ intf['ingress_qos'] = conf.return_value('ingress-qos')
# ingress changes QoS require VLAN interface recreation
if conf.return_effective_value('ingress-qos'):
- if vlan['ingress_qos'] != conf.return_effective_value('ingress-qos'):
- vlan['ingress_qos_changed'] = True
+ if intf['ingress_qos'] != conf.return_effective_value('ingress-qos'):
+ intf['ingress_qos_changed'] = True
- # ethertype is mandatory on vif-s nodes and only exists here!
- # check if this is a vif-s node at all:
- if conf.get_level()[-2] == 'vif-s':
- vlan['vif_c'] = []
- vlan['vif_c_remove'] = []
-
- # ethertype uses a default of 0x88A8
- tmp = '0x88A8'
- if conf.exists('ethertype'):
- tmp = conf.return_value('ethertype')
- vlan['ethertype'] = get_ethertype(tmp)
-
- # get vif-c interfaces (currently effective) - to determine which vif-c
+ disabled = disable_state(conf)
+
+ # Get the interface IPs
+ eff_addr = conf.return_effective_values('address')
+ act_addr = conf.return_values('address')
+
+ # Get prefixes for IPv6 addressing based on MAC address (EUI-64)
+ eff_eui = conf.return_effective_values('ipv6 address eui64')
+ act_eui = conf.return_values('ipv6 address eui64')
+
+ # Determine what should stay or be removed
+ if disabled == disable.both:
+ # was and is still disabled
+ intf['disable'] = True
+ intf['address_remove'] = []
+ intf['address'] = []
+ intf['ipv6_eui64_prefix'] = []
+ intf['ipv6_eui64_prefix_remove'] = []
+ elif disabled == disable.now:
+ # it is now disable but was not before
+ intf['disable'] = True
+ intf['address_remove'] = eff_addr
+ intf['address'] = []
+ intf['ipv6_eui64_prefix'] = eff_eui
+ intf['ipv6_eui64_prefix_remove'] = []
+ elif disabled == disable.was:
+ # it was disable but not anymore
+ intf['disable'] = False
+ intf['address_remove'] = []
+ intf['address'] = act_addr
+ intf['ipv6_eui64_prefix'] = []
+ intf['ipv6_eui64_prefix_remove'] = act_eui
+ else:
+ # normal change
+ intf['disable'] = False
+ intf['address_remove'] = list_diff(eff_addr, act_addr)
+ intf['address'] = act_addr
+ intf['ipv6_eui64_prefix_remove'] = list_diff(eff_eui, act_eui)
+ intf['ipv6_eui64_prefix'] = act_eui
+
+ # Remove the default link-local address if set.
+ if conf.exists('ipv6 address no-default-link-local'):
+ intf['ipv6_eui64_prefix_remove'].append('fe80::/64')
+ else:
+ # add the link-local by default to make IPv6 work
+ intf['ipv6_eui64_prefix'].append('fe80::/64')
+
+ # Find out if MAC has changed
+ try:
+ interface = Interface(intf['intf'], create=False)
+ if intf['mac'] and intf['mac'] != interface.get_mac():
+ intf['ipv6_eui64_prefix_remove'] += intf['ipv6_eui64_prefix']
+ except Exception:
+ # If the interface does not exists, it can not have changed
+ pass
+
+ return intf, disable
+
+
+
+def add_to_dict(conf, disabled, ifdict, section, key):
+ """
+ parse a section of vif/vif-s/vif-c and add them to the dict
+ follow the convention to:
+ * use the "key" for what to add
+ * use the "key" what what to remove
+
+ conf: is the Config() already at the level we need to parse
+ disabled: is a disable enum so we know how to handle to data
+ intf: if the interface dictionary
+ section: is the section name to parse (vif/vif-s/vif-c)
+ key: is the dict key to use (vif/vifs/vifc)
+ """
+
+ if not conf.exists(section):
+ return ifdict
+
+ effect = conf.list_effective_nodes(section)
+ active = conf.list_nodes(section)
+
+ # the section to parse for vlan
+ sections = []
+
+ # Determine interface addresses (currently effective) - to determine which
+ # address is no longer valid and needs to be removed from the bond
+ if disabled == disable.both:
+ # was and is still disabled
+ ifdict[f'{key}_remove'] = []
+ elif disabled == disable.now:
+ # it is now disable but was not before
+ ifdict[f'{key}_remove'] = effect
+ elif disabled == disable.was:
+ # it was disable but not anymore
+ ifdict[f'{key}_remove'] = []
+ sections = active
+ else:
+ # normal change
+ # get vif-s interfaces (currently effective) - to determine which vif-s
# interface is no longer present and needs to be removed
- eff_intf = conf.list_effective_nodes('vif-c')
- act_intf = conf.list_nodes('vif-c')
- vlan['vif_c_remove'] = list_diff(eff_intf, act_intf)
-
- # check if there is a Q-in-Q vlan customer interface
- # and call this function recursively
- if conf.exists('vif-c'):
- cfg_level = conf.get_level()
- # add new key (vif-c) to dictionary
- for vif in conf.list_nodes('vif-c'):
- # set config level to vif interface
- conf.set_level(cfg_level + ['vif-c', vif])
- vlan['vif_c'].append(vlan_to_dict(conf))
+ ifdict[f'{key}_remove'] = list_diff(effect, active)
+ sections = active
+
+ current_level = conf.get_level()
+
+ # add each section, the key must already exists
+ for s in sections:
+ # set config level to vif interface
+ conf.set_level(current_level + [section, s])
+ ifdict[f'{key}'].append(vlan_to_dict(conf))
+
+ # re-set configuration level to leave things as found
+ conf.set_level(current_level)
+
+ return ifdict
+
+
+def vlan_to_dict(conf, default=vlan_default):
+ vlan, disabled = intf_to_dict(conf, default)
+ # get the '100' in 'interfaces bonding bond0 vif-s 100
+ vlan['id'] = conf.get_level()[-1]
+
+ current_level = conf.get_level()
+
+ # if this is a not within vif-s node, we are done
+ if current_level[-2] != 'vif-s':
+ return vlan
+
+ # ethertype is mandatory on vif-s nodes and only exists here!
+ # ethertype uses a default of 0x88A8
+ tmp = '0x88A8'
+ if conf.exists('ethertype'):
+ tmp = conf.return_value('ethertype')
+ vlan['ethertype'] = get_ethertype(tmp)
+
+ # check if there is a Q-in-Q vlan customer interface
+ # and call this function recursively
+
+ add_to_dict(conf, disable, vlan, 'vif-c', 'vif_c')
return vlan