diff options
28 files changed, 625 insertions, 788 deletions
diff --git a/data/templates/firewall/nftables.j2 b/data/templates/firewall/nftables.j2 index 833df3a67..343917fee 100644 --- a/data/templates/firewall/nftables.j2 +++ b/data/templates/firewall/nftables.j2 @@ -57,7 +57,7 @@ table ip vyos_filter { {% endif %} {% endfor %} {% endif %} - {{ conf | nft_default_rule('FWD-filter', 'ipv4') }} + {{ conf | nft_default_rule('FWD-' + prior, 'ipv4') }} } {% endfor %} {% endif %} @@ -77,7 +77,7 @@ table ip vyos_filter { {% endif %} {% endfor %} {% endif %} - {{ conf | nft_default_rule('INP-filter', 'ipv4') }} + {{ conf | nft_default_rule('INP-' + prior, 'ipv4') }} } {% endfor %} {% endif %} @@ -97,14 +97,11 @@ table ip vyos_filter { {% endif %} {% endfor %} {% endif %} - {{ conf | nft_default_rule('OUT-filter', 'ipv4') }} + {{ conf | nft_default_rule('OUT-' + prior, 'ipv4') }} } {% endfor %} {% endif %} - chain VYOS_FRAG_MARK { - type filter hook prerouting priority -450; policy accept; - ip frag-off & 0x3fff != 0 meta mark set 0xffff1 return - } + {% if ipv4.prerouting is vyos_defined %} {% for prior, conf in ipv4.prerouting.items() %} chain VYOS_PREROUTING_{{ prior }} { @@ -117,11 +114,16 @@ table ip vyos_filter { {% endif %} {% endfor %} {% endif %} - {{ conf | nft_default_rule('PRE-filter', 'ipv4') }} + {{ conf | nft_default_rule('PRE-' + prior, 'ipv4') }} } {% endfor %} {% endif %} + chain VYOS_FRAG_MARK { + type filter hook prerouting priority -450; policy accept; + ip frag-off & 0x3fff != 0 meta mark set 0xffff1 return + } + {% if ipv4.name is vyos_defined %} {% for name_text, conf in ipv4.name.items() %} chain NAME_{{ name_text }} { @@ -202,13 +204,13 @@ table ip6 vyos_filter { {% endif %} {% if conf.rule is vyos_defined %} {% for rule_id, rule_conf in conf.rule.items() if rule_conf.disable is not vyos_defined %} - {{ rule_conf | nft_rule('FWD', prior, rule_id ,'ip6') }} + {{ rule_conf | nft_rule('FWD', prior, rule_id, 'ip6') }} {% if rule_conf.recent is vyos_defined %} {% set ns.sets = ns.sets + ['FWD_' + prior + '_' + rule_id] %} {% endif %} {% endfor %} {% endif %} - {{ conf | nft_default_rule('FWD-filter', 'ipv6') }} + {{ conf | nft_default_rule('FWD-' + prior, 'ipv6') }} } {% endfor %} {% endif %} @@ -222,13 +224,13 @@ table ip6 vyos_filter { {% endif %} {% if conf.rule is vyos_defined %} {% for rule_id, rule_conf in conf.rule.items() if rule_conf.disable is not vyos_defined %} - {{ rule_conf | nft_rule('INP', prior, rule_id ,'ip6') }} + {{ rule_conf | nft_rule('INP', prior, rule_id, 'ip6') }} {% if rule_conf.recent is vyos_defined %} {% set ns.sets = ns.sets + ['INP_' + prior + '_' + rule_id] %} {% endif %} {% endfor %} {% endif %} - {{ conf | nft_default_rule('INP-filter', 'ipv6') }} + {{ conf | nft_default_rule('INP-' + prior, 'ipv6') }} } {% endfor %} {% endif %} @@ -242,17 +244,33 @@ table ip6 vyos_filter { {% endif %} {% if conf.rule is vyos_defined %} {% for rule_id, rule_conf in conf.rule.items() if rule_conf.disable is not vyos_defined %} - {{ rule_conf | nft_rule('OUT', prior, rule_id ,'ip6') }} + {{ rule_conf | nft_rule('OUT', prior, rule_id, 'ip6') }} {% if rule_conf.recent is vyos_defined %} {% set ns.sets = ns.sets + ['OUT_ ' + prior + '_' + rule_id] %} {% endif %} {% endfor %} {% endif %} - {{ conf | nft_default_rule('OUT-filter', 'ipv6') }} + {{ conf | nft_default_rule('OUT-' + prior, 'ipv6') }} } {% endfor %} {% endif %} +{% if ipv6.prerouting is vyos_defined %} +{% for prior, conf in ipv6.prerouting.items() %} + chain VYOS_IPV6_PREROUTING_{{ prior }} { + type filter hook prerouting priority {{ prior }}; policy accept; +{% if conf.rule is vyos_defined %} +{% for rule_id, rule_conf in conf.rule.items() if rule_conf.disable is not vyos_defined %} + {{ rule_conf | nft_rule('PRE', prior, rule_id, 'ip6') }} +{% if rule_conf.recent is vyos_defined %} +{% set ns.sets = ns.sets + ['PRE_' + prior + '_' + rule_id] %} +{% endif %} +{% endfor %} +{% endif %} + {{ conf | nft_default_rule('PRE-' + prior, 'ipv6') }} + } +{% endfor %} +{% endif %} chain VYOS_FRAG6_MARK { type filter hook prerouting priority -450; policy accept; exthdr frag exists meta mark set 0xffff1 return diff --git a/interface-definitions/firewall.xml.in b/interface-definitions/firewall.xml.in index 24e63c5ec..dc4625af0 100644 --- a/interface-definitions/firewall.xml.in +++ b/interface-definitions/firewall.xml.in @@ -378,6 +378,7 @@ #include <include/firewall/ipv4-hook-forward.xml.i> #include <include/firewall/ipv4-hook-input.xml.i> #include <include/firewall/ipv4-hook-output.xml.i> + #include <include/firewall/ipv4-hook-prerouting.xml.i> #include <include/firewall/ipv4-custom-name.xml.i> </children> </node> @@ -389,6 +390,7 @@ #include <include/firewall/ipv6-hook-forward.xml.i> #include <include/firewall/ipv6-hook-input.xml.i> #include <include/firewall/ipv6-hook-output.xml.i> + #include <include/firewall/ipv6-hook-prerouting.xml.i> #include <include/firewall/ipv6-custom-name.xml.i> </children> </node> diff --git a/interface-definitions/include/firewall/action-and-notrack.xml.i b/interface-definitions/include/firewall/action-and-notrack.xml.i index 5f81a1451..e063c58d5 100644 --- a/interface-definitions/include/firewall/action-and-notrack.xml.i +++ b/interface-definitions/include/firewall/action-and-notrack.xml.i @@ -3,13 +3,17 @@ <properties> <help>Rule action</help> <completionHelp> - <list>accept jump notrack reject return drop queue</list> + <list>accept continue jump notrack reject return drop queue</list> </completionHelp> <valueHelp> <format>accept</format> <description>Accept matching entries</description> </valueHelp> <valueHelp> + <format>continue</format> + <description>Continue parsing next rule</description> + </valueHelp> + <valueHelp> <format>jump</format> <description>Jump to another chain</description> </valueHelp> @@ -34,7 +38,7 @@ <description>Igone connection tracking</description> </valueHelp> <constraint> - <regex>(accept|jump|notrack|reject|return|drop|queue)</regex> + <regex>(accept|continue|jump|notrack|reject|return|drop|queue)</regex> </constraint> </properties> </leafNode> diff --git a/interface-definitions/include/firewall/add-addr-to-group-ipv4.xml.i b/interface-definitions/include/firewall/add-addr-to-group-ipv4.xml.i new file mode 100644 index 000000000..a47cadd55 --- /dev/null +++ b/interface-definitions/include/firewall/add-addr-to-group-ipv4.xml.i @@ -0,0 +1,25 @@ +<!-- include start from firewall/add-addr-to-group-ipv4.xml.i --> +<node name="add-address-to-group"> + <properties> + <help>Add ip address to dynamic address-group</help> + </properties> + <children> + <node name="source-address"> + <properties> + <help>Add source ip addresses to dynamic address-group</help> + </properties> + <children> + #include <include/firewall/add-dynamic-address-groups.xml.i> + </children> + </node> + <node name="destination-address"> + <properties> + <help>Add destination ip addresses to dynamic address-group</help> + </properties> + <children> + #include <include/firewall/add-dynamic-address-groups.xml.i> + </children> + </node> + </children> +</node> +<!-- include end -->
\ No newline at end of file diff --git a/interface-definitions/include/firewall/add-addr-to-group-ipv6.xml.i b/interface-definitions/include/firewall/add-addr-to-group-ipv6.xml.i new file mode 100644 index 000000000..2cb077450 --- /dev/null +++ b/interface-definitions/include/firewall/add-addr-to-group-ipv6.xml.i @@ -0,0 +1,25 @@ +<!-- include start from firewall/add-addr-to-group-ipv6.xml.i --> +<node name="add-address-to-group"> + <properties> + <help>Add ipv6 address to dynamic ipv6-address-group</help> + </properties> + <children> + <node name="source-address"> + <properties> + <help>Add source ipv6 addresses to dynamic ipv6-address-group</help> + </properties> + <children> + #include <include/firewall/add-dynamic-ipv6-address-groups.xml.i> + </children> + </node> + <node name="destination-address"> + <properties> + <help>Add destination ipv6 addresses to dynamic ipv6-address-group</help> + </properties> + <children> + #include <include/firewall/add-dynamic-ipv6-address-groups.xml.i> + </children> + </node> + </children> +</node> +<!-- include end -->
\ No newline at end of file diff --git a/interface-definitions/include/firewall/common-rule-inet.xml.i b/interface-definitions/include/firewall/common-rule-inet.xml.i index bef1c3da5..55ffa3a8b 100644 --- a/interface-definitions/include/firewall/common-rule-inet.xml.i +++ b/interface-definitions/include/firewall/common-rule-inet.xml.i @@ -1,235 +1,24 @@ <!-- include start from firewall/common-rule-inet.xml.i --> #include <include/firewall/action.xml.i> -#include <include/generic-description.xml.i> -#include <include/firewall/dscp.xml.i> -#include <include/firewall/packet-options.xml.i> -#include <include/firewall/firewall-mark.xml.i> -#include <include/firewall/connection-mark.xml.i> #include <include/firewall/conntrack-helper.xml.i> -#include <include/firewall/nft-queue.xml.i> +#include <include/firewall/connection-mark.xml.i> +#include <include/firewall/connection-status.xml.i> +#include <include/generic-description.xml.i> #include <include/generic-disable-node.xml.i> -<node name="fragment"> - <properties> - <help>IP fragment match</help> - </properties> - <children> - <leafNode name="match-frag"> - <properties> - <help>Second and further fragments of fragmented packets</help> - <valueless/> - </properties> - </leafNode> - <leafNode name="match-non-frag"> - <properties> - <help>Head fragments or unfragmented packets</help> - <valueless/> - </properties> - </leafNode> - </children> -</node> -<node name="limit"> - <properties> - <help>Rate limit using a token bucket filter</help> - </properties> - <children> - <leafNode name="burst"> - <properties> - <help>Maximum number of packets to allow in excess of rate</help> - <valueHelp> - <format>u32:0-4294967295</format> - <description>Maximum number of packets to allow in excess of rate</description> - </valueHelp> - <constraint> - <validator name="numeric" argument="--range 0-4294967295"/> - </constraint> - </properties> - </leafNode> - <leafNode name="rate"> - <properties> - <help>Maximum average matching rate</help> - <valueHelp> - <format>txt</format> - <description>integer/unit (Example: 5/minute)</description> - </valueHelp> - <constraint> - <regex>\d+/(second|minute|hour|day)</regex> - </constraint> - </properties> - </leafNode> - </children> -</node> +#include <include/firewall/dscp.xml.i> +#include <include/firewall/fragment.xml.i> +#include <include/firewall/match-ipsec.xml.i> +#include <include/firewall/limit.xml.i> #include <include/firewall/log.xml.i> #include <include/firewall/log-options.xml.i> -<node name="connection-status"> - <properties> - <help>Connection status</help> - </properties> - <children> - <leafNode name="nat"> - <properties> - <help>NAT connection status</help> - <completionHelp> - <list>destination source</list> - </completionHelp> - <valueHelp> - <format>destination</format> - <description>Match connections that are subject to destination NAT</description> - </valueHelp> - <valueHelp> - <format>source</format> - <description>Match connections that are subject to source NAT</description> - </valueHelp> - <constraint> - <regex>(destination|source)</regex> - </constraint> - </properties> - </leafNode> - </children> -</node> -<leafNode name="protocol"> - <properties> - <help>Protocol to match (protocol name, number, or "all")</help> - <completionHelp> - <script>${vyos_completion_dir}/list_protocols.sh</script> - <list>all tcp_udp</list> - </completionHelp> - <valueHelp> - <format>all</format> - <description>All IP protocols</description> - </valueHelp> - <valueHelp> - <format>tcp_udp</format> - <description>Both TCP and UDP</description> - </valueHelp> - <valueHelp> - <format>u32:0-255</format> - <description>IP protocol number</description> - </valueHelp> - <valueHelp> - <format><protocol></format> - <description>IP protocol name</description> - </valueHelp> - <valueHelp> - <format>!<protocol></format> - <description>IP protocol name</description> - </valueHelp> - <constraint> - <validator name="ip-protocol"/> - </constraint> - </properties> -</leafNode> -<node name="recent"> - <properties> - <help>Parameters for matching recently seen sources</help> - </properties> - <children> - <leafNode name="count"> - <properties> - <help>Source addresses seen more than N times</help> - <valueHelp> - <format>u32:1-255</format> - <description>Source addresses seen more than N times</description> - </valueHelp> - <constraint> - <validator name="numeric" argument="--range 1-255"/> - </constraint> - </properties> - </leafNode> - <leafNode name="time"> - <properties> - <help>Source addresses seen in the last second/minute/hour</help> - <completionHelp> - <list>second minute hour</list> - </completionHelp> - <valueHelp> - <format>second</format> - <description>Source addresses seen COUNT times in the last second</description> - </valueHelp> - <valueHelp> - <format>minute</format> - <description>Source addresses seen COUNT times in the last minute</description> - </valueHelp> - <valueHelp> - <format>hour</format> - <description>Source addresses seen COUNT times in the last hour</description> - </valueHelp> - <constraint> - <regex>(second|minute|hour)</regex> - </constraint> - </properties> - </leafNode> - </children> -</node> -#include <include/firewall/synproxy.xml.i> +#include <include/firewall/firewall-mark.xml.i> +#include <include/firewall/packet-options.xml.i> +#include <include/firewall/protocol.xml.i> +#include <include/firewall/nft-queue.xml.i> +#include <include/firewall/recent.xml.i> #include <include/firewall/state.xml.i> +#include <include/firewall/synproxy.xml.i> #include <include/firewall/tcp-flags.xml.i> #include <include/firewall/tcp-mss.xml.i> -<node name="time"> - <properties> - <help>Time to match rule</help> - </properties> - <children> - <leafNode name="startdate"> - <properties> - <help>Date to start matching rule</help> - <valueHelp> - <format>txt</format> - <description>Enter date using following notation - YYYY-MM-DD</description> - </valueHelp> - <constraint> - <regex>(\d{4}\-\d{2}\-\d{2})</regex> - </constraint> - </properties> - </leafNode> - <leafNode name="starttime"> - <properties> - <help>Time of day to start matching rule</help> - <valueHelp> - <format>txt</format> - <description>Enter time using using 24 hour notation - hh:mm:ss</description> - </valueHelp> - <constraint> - <regex>([0-2][0-9](\:[0-5][0-9]){1,2})</regex> - </constraint> - </properties> - </leafNode> - <leafNode name="stopdate"> - <properties> - <help>Date to stop matching rule</help> - <valueHelp> - <format>txt</format> - <description>Enter date using following notation - YYYY-MM-DD</description> - </valueHelp> - <constraint> - <regex>(\d{4}\-\d{2}\-\d{2})</regex> - </constraint> - </properties> - </leafNode> - <leafNode name="stoptime"> - <properties> - <help>Time of day to stop matching rule</help> - <valueHelp> - <format>txt</format> - <description>Enter time using using 24 hour notation - hh:mm:ss</description> - </valueHelp> - <constraint> - <regex>([0-2][0-9](\:[0-5][0-9]){1,2})</regex> - </constraint> - </properties> - </leafNode> - <leafNode name="weekdays"> - <properties> - <help>Comma separated weekdays to match rule on</help> - <valueHelp> - <format>txt</format> - <description>Name of day (Monday, Tuesday, Wednesday, Thursdays, Friday, Saturday, Sunday)</description> - </valueHelp> - <valueHelp> - <format>u32:0-6</format> - <description>Day number (0 = Sunday ... 6 = Saturday)</description> - </valueHelp> - </properties> - </leafNode> - </children> -</node> +#include <include/firewall/time.xml.i> <!-- include end --> diff --git a/interface-definitions/include/firewall/common-rule-ipv4-raw.xml.i b/interface-definitions/include/firewall/common-rule-ipv4-raw.xml.i index e7468bfba..960c960db 100644 --- a/interface-definitions/include/firewall/common-rule-ipv4-raw.xml.i +++ b/interface-definitions/include/firewall/common-rule-ipv4-raw.xml.i @@ -1,9 +1,22 @@ <!-- include start from firewall/common-rule-ipv4-raw.xml.i --> +#include <include/firewall/add-addr-to-group-ipv4.xml.i> #include <include/firewall/action-and-notrack.xml.i> #include <include/generic-description.xml.i> #include <include/firewall/dscp.xml.i> -#include <include/firewall/ttl.xml.i> +#include <include/firewall/fragment.xml.i> +#include <include/generic-disable-node.xml.i> +#include <include/firewall/icmp.xml.i> +#include <include/firewall/limit.xml.i> +#include <include/firewall/log.xml.i> +#include <include/firewall/log-options.xml.i> +#include <include/firewall/match-ipsec.xml.i> +#include <include/firewall/protocol.xml.i> #include <include/firewall/nft-queue.xml.i> +#include <include/firewall/recent.xml.i> +#include <include/firewall/tcp-flags.xml.i> +#include <include/firewall/tcp-mss.xml.i> +#include <include/firewall/time.xml.i> +#include <include/firewall/ttl.xml.i> <node name="destination"> <properties> <help>Destination parameters</help> @@ -18,228 +31,6 @@ #include <include/firewall/source-destination-group.xml.i> </children> </node> -#include <include/generic-disable-node.xml.i> -<node name="fragment"> - <properties> - <help>IP fragment match</help> - </properties> - <children> - <leafNode name="match-frag"> - <properties> - <help>Second and further fragments of fragmented packets</help> - <valueless/> - </properties> - </leafNode> - <leafNode name="match-non-frag"> - <properties> - <help>Head fragments or unfragmented packets</help> - <valueless/> - </properties> - </leafNode> - </children> -</node> -<node name="icmp"> - <properties> - <help>ICMP type and code information</help> - </properties> - <children> - <leafNode name="code"> - <properties> - <help>ICMP code</help> - <valueHelp> - <format>u32:0-255</format> - <description>ICMP code (0-255)</description> - </valueHelp> - <constraint> - <validator name="numeric" argument="--range 0-255"/> - </constraint> - </properties> - </leafNode> - <leafNode name="type"> - <properties> - <help>ICMP type</help> - <valueHelp> - <format>u32:0-255</format> - <description>ICMP type (0-255)</description> - </valueHelp> - <constraint> - <validator name="numeric" argument="--range 0-255"/> - </constraint> - </properties> - </leafNode> - #include <include/firewall/icmp-type-name.xml.i> - </children> -</node> -<node name="ipsec"> - <properties> - <help>Inbound IPsec packets</help> - </properties> - <children> - <leafNode name="match-ipsec"> - <properties> - <help>Inbound IPsec packets</help> - <valueless/> - </properties> - </leafNode> - <leafNode name="match-none"> - <properties> - <help>Inbound non-IPsec packets</help> - <valueless/> - </properties> - </leafNode> - </children> -</node> -<node name="limit"> - <properties> - <help>Rate limit using a token bucket filter</help> - </properties> - <children> - <leafNode name="burst"> - <properties> - <help>Maximum number of packets to allow in excess of rate</help> - <valueHelp> - <format>u32:0-4294967295</format> - <description>Maximum number of packets to allow in excess of rate</description> - </valueHelp> - <constraint> - <validator name="numeric" argument="--range 0-4294967295"/> - </constraint> - </properties> - </leafNode> - <leafNode name="rate"> - <properties> - <help>Maximum average matching rate</help> - <valueHelp> - <format>txt</format> - <description>integer/unit (Example: 5/minute)</description> - </valueHelp> - <constraint> - <regex>\d+/(second|minute|hour|day)</regex> - </constraint> - </properties> - </leafNode> - </children> -</node> -<leafNode name="log"> - <properties> - <help>Option to log packets matching rule</help> - <completionHelp> - <list>enable disable</list> - </completionHelp> - <valueHelp> - <format>enable</format> - <description>Enable log</description> - </valueHelp> - <valueHelp> - <format>disable</format> - <description>Disable log</description> - </valueHelp> - <constraint> - <regex>(enable|disable)</regex> - </constraint> - </properties> -</leafNode> -#include <include/firewall/log-options.xml.i> -<node name="connection-status"> - <properties> - <help>Connection status</help> - </properties> - <children> - <leafNode name="nat"> - <properties> - <help>NAT connection status</help> - <completionHelp> - <list>destination source</list> - </completionHelp> - <valueHelp> - <format>destination</format> - <description>Match connections that are subject to destination NAT</description> - </valueHelp> - <valueHelp> - <format>source</format> - <description>Match connections that are subject to source NAT</description> - </valueHelp> - <constraint> - <regex>(destination|source)</regex> - </constraint> - </properties> - </leafNode> - </children> -</node> -<leafNode name="protocol"> - <properties> - <help>Protocol to match (protocol name, number, or "all")</help> - <completionHelp> - <script>${vyos_completion_dir}/list_protocols.sh</script> - <list>all tcp_udp</list> - </completionHelp> - <valueHelp> - <format>all</format> - <description>All IP protocols</description> - </valueHelp> - <valueHelp> - <format>tcp_udp</format> - <description>Both TCP and UDP</description> - </valueHelp> - <valueHelp> - <format>u32:0-255</format> - <description>IP protocol number</description> - </valueHelp> - <valueHelp> - <format><protocol></format> - <description>IP protocol name</description> - </valueHelp> - <valueHelp> - <format>!<protocol></format> - <description>IP protocol name</description> - </valueHelp> - <constraint> - <validator name="ip-protocol"/> - </constraint> - </properties> -</leafNode> -<node name="recent"> - <properties> - <help>Parameters for matching recently seen sources</help> - </properties> - <children> - <leafNode name="count"> - <properties> - <help>Source addresses seen more than N times</help> - <valueHelp> - <format>u32:1-255</format> - <description>Source addresses seen more than N times</description> - </valueHelp> - <constraint> - <validator name="numeric" argument="--range 1-255"/> - </constraint> - </properties> - </leafNode> - <leafNode name="time"> - <properties> - <help>Source addresses seen in the last second/minute/hour</help> - <completionHelp> - <list>second minute hour</list> - </completionHelp> - <valueHelp> - <format>second</format> - <description>Source addresses seen COUNT times in the last second</description> - </valueHelp> - <valueHelp> - <format>minute</format> - <description>Source addresses seen COUNT times in the last minute</description> - </valueHelp> - <valueHelp> - <format>hour</format> - <description>Source addresses seen COUNT times in the last hour</description> - </valueHelp> - <constraint> - <regex>(second|minute|hour)</regex> - </constraint> - </properties> - </leafNode> - </children> -</node> <node name="source"> <properties> <help>Source parameters</help> @@ -254,74 +45,4 @@ #include <include/firewall/source-destination-group.xml.i> </children> </node> -#include <include/firewall/tcp-flags.xml.i> -#include <include/firewall/tcp-mss.xml.i> -<node name="time"> - <properties> - <help>Time to match rule</help> - </properties> - <children> - <leafNode name="startdate"> - <properties> - <help>Date to start matching rule</help> - <valueHelp> - <format>txt</format> - <description>Enter date using following notation - YYYY-MM-DD</description> - </valueHelp> - <constraint> - <regex>(\d{4}\-\d{2}\-\d{2})</regex> - </constraint> - </properties> - </leafNode> - <leafNode name="starttime"> - <properties> - <help>Time of day to start matching rule</help> - <valueHelp> - <format>txt</format> - <description>Enter time using using 24 hour notation - hh:mm:ss</description> - </valueHelp> - <constraint> - <regex>([0-2][0-9](\:[0-5][0-9]){1,2})</regex> - </constraint> - </properties> - </leafNode> - <leafNode name="stopdate"> - <properties> - <help>Date to stop matching rule</help> - <valueHelp> - <format>txt</format> - <description>Enter date using following notation - YYYY-MM-DD</description> - </valueHelp> - <constraint> - <regex>(\d{4}\-\d{2}\-\d{2})</regex> - </constraint> - </properties> - </leafNode> - <leafNode name="stoptime"> - <properties> - <help>Time of day to stop matching rule</help> - <valueHelp> - <format>txt</format> - <description>Enter time using using 24 hour notation - hh:mm:ss</description> - </valueHelp> - <constraint> - <regex>([0-2][0-9](\:[0-5][0-9]){1,2})</regex> - </constraint> - </properties> - </leafNode> - <leafNode name="weekdays"> - <properties> - <help>Comma separated weekdays to match rule on</help> - <valueHelp> - <format>txt</format> - <description>Name of day (Monday, Tuesday, Wednesday, Thursdays, Friday, Saturday, Sunday)</description> - </valueHelp> - <valueHelp> - <format>u32:0-6</format> - <description>Day number (0 = Sunday ... 6 = Saturday)</description> - </valueHelp> - </properties> - </leafNode> - </children> -</node> -<!-- include end --> +<!-- include end -->
\ No newline at end of file diff --git a/interface-definitions/include/firewall/common-rule-ipv4.xml.i b/interface-definitions/include/firewall/common-rule-ipv4.xml.i index 158c7a662..803b94b06 100644 --- a/interface-definitions/include/firewall/common-rule-ipv4.xml.i +++ b/interface-definitions/include/firewall/common-rule-ipv4.xml.i @@ -1,29 +1,8 @@ <!-- include start from firewall/common-rule-ipv4.xml.i --> +#include <include/firewall/add-addr-to-group-ipv4.xml.i> #include <include/firewall/common-rule-inet.xml.i> +#include <include/firewall/icmp.xml.i> #include <include/firewall/ttl.xml.i> -<node name="add-address-to-group"> - <properties> - <help>Add ip address to dynamic address-group</help> - </properties> - <children> - <node name="source-address"> - <properties> - <help>Add source ip addresses to dynamic address-group</help> - </properties> - <children> - #include <include/firewall/add-dynamic-address-groups.xml.i> - </children> - </node> - <node name="destination-address"> - <properties> - <help>Add destination ip addresses to dynamic address-group</help> - </properties> - <children> - #include <include/firewall/add-dynamic-address-groups.xml.i> - </children> - </node> - </children> -</node> <node name="destination"> <properties> <help>Destination parameters</help> @@ -39,38 +18,6 @@ #include <include/firewall/source-destination-dynamic-group.xml.i> </children> </node> -<node name="icmp"> - <properties> - <help>ICMP type and code information</help> - </properties> - <children> - <leafNode name="code"> - <properties> - <help>ICMP code</help> - <valueHelp> - <format>u32:0-255</format> - <description>ICMP code (0-255)</description> - </valueHelp> - <constraint> - <validator name="numeric" argument="--range 0-255"/> - </constraint> - </properties> - </leafNode> - <leafNode name="type"> - <properties> - <help>ICMP type</help> - <valueHelp> - <format>u32:0-255</format> - <description>ICMP type (0-255)</description> - </valueHelp> - <constraint> - <validator name="numeric" argument="--range 0-255"/> - </constraint> - </properties> - </leafNode> - #include <include/firewall/icmp-type-name.xml.i> - </children> -</node> <leafNode name="jump-target"> <properties> <help>Set jump target. Action jump must be defined to use this setting</help> diff --git a/interface-definitions/include/firewall/common-rule-ipv6-raw.xml.i b/interface-definitions/include/firewall/common-rule-ipv6-raw.xml.i new file mode 100644 index 000000000..958167b89 --- /dev/null +++ b/interface-definitions/include/firewall/common-rule-ipv6-raw.xml.i @@ -0,0 +1,50 @@ +<!-- include start from firewall/common-rule-ipv6-raw.xml.i --> +#include <include/firewall/add-addr-to-group-ipv6.xml.i> +#include <include/firewall/action-and-notrack.xml.i> +#include <include/generic-description.xml.i> +#include <include/firewall/dscp.xml.i> +#include <include/firewall/fragment.xml.i> +#include <include/generic-disable-node.xml.i> +#include <include/firewall/icmpv6.xml.i> +#include <include/firewall/limit.xml.i> +#include <include/firewall/log.xml.i> +#include <include/firewall/log-options.xml.i> +#include <include/firewall/match-ipsec.xml.i> +#include <include/firewall/protocol.xml.i> +#include <include/firewall/nft-queue.xml.i> +#include <include/firewall/recent.xml.i> +#include <include/firewall/tcp-flags.xml.i> +#include <include/firewall/tcp-mss.xml.i> +#include <include/firewall/time.xml.i> +#include <include/firewall/hop-limit.xml.i> +<node name="destination"> + <properties> + <help>Destination parameters</help> + </properties> + <children> + #include <include/firewall/address-ipv6.xml.i> + #include <include/firewall/address-mask-ipv6.xml.i> + #include <include/firewall/fqdn.xml.i> + #include <include/firewall/geoip.xml.i> + #include <include/firewall/mac-address.xml.i> + #include <include/firewall/port.xml.i> + #include <include/firewall/source-destination-group-ipv6.xml.i> + #include <include/firewall/source-destination-dynamic-group-ipv6.xml.i> + </children> +</node> +<node name="source"> + <properties> + <help>Source parameters</help> + </properties> + <children> + #include <include/firewall/address-ipv6.xml.i> + #include <include/firewall/address-mask-ipv6.xml.i> + #include <include/firewall/fqdn.xml.i> + #include <include/firewall/geoip.xml.i> + #include <include/firewall/mac-address.xml.i> + #include <include/firewall/port.xml.i> + #include <include/firewall/source-destination-group-ipv6.xml.i> + #include <include/firewall/source-destination-dynamic-group-ipv6.xml.i> + </children> +</node> +<!-- include end -->
\ No newline at end of file diff --git a/interface-definitions/include/firewall/common-rule-ipv6.xml.i b/interface-definitions/include/firewall/common-rule-ipv6.xml.i index 78eeb361e..bb176fe71 100644 --- a/interface-definitions/include/firewall/common-rule-ipv6.xml.i +++ b/interface-definitions/include/firewall/common-rule-ipv6.xml.i @@ -1,29 +1,8 @@ <!-- include start from firewall/common-rule-ipv6.xml.i --> +#include <include/firewall/add-addr-to-group-ipv6.xml.i> #include <include/firewall/common-rule-inet.xml.i> #include <include/firewall/hop-limit.xml.i> -<node name="add-address-to-group"> - <properties> - <help>Add ipv6 address to dynamic ipv6-address-group</help> - </properties> - <children> - <node name="source-address"> - <properties> - <help>Add source ipv6 addresses to dynamic ipv6-address-group</help> - </properties> - <children> - #include <include/firewall/add-dynamic-ipv6-address-groups.xml.i> - </children> - </node> - <node name="destination-address"> - <properties> - <help>Add destination ipv6 addresses to dynamic ipv6-address-group</help> - </properties> - <children> - #include <include/firewall/add-dynamic-ipv6-address-groups.xml.i> - </children> - </node> - </children> -</node> +#include <include/firewall/icmpv6.xml.i> <node name="destination"> <properties> <help>Destination parameters</help> @@ -39,38 +18,6 @@ #include <include/firewall/source-destination-dynamic-group-ipv6.xml.i> </children> </node> -<node name="icmpv6"> - <properties> - <help>ICMPv6 type and code information</help> - </properties> - <children> - <leafNode name="code"> - <properties> - <help>ICMPv6 code</help> - <valueHelp> - <format>u32:0-255</format> - <description>ICMPv6 code (0-255)</description> - </valueHelp> - <constraint> - <validator name="numeric" argument="--range 0-255"/> - </constraint> - </properties> - </leafNode> - <leafNode name="type"> - <properties> - <help>ICMPv6 type</help> - <valueHelp> - <format>u32:0-255</format> - <description>ICMPv6 type (0-255)</description> - </valueHelp> - <constraint> - <validator name="numeric" argument="--range 0-255"/> - </constraint> - </properties> - </leafNode> - #include <include/firewall/icmpv6-type-name.xml.i> - </children> -</node> <leafNode name="jump-target"> <properties> <help>Set jump target. Action jump must be defined to use this setting</help> diff --git a/interface-definitions/include/firewall/connection-status.xml.i b/interface-definitions/include/firewall/connection-status.xml.i new file mode 100644 index 000000000..5236c2f4f --- /dev/null +++ b/interface-definitions/include/firewall/connection-status.xml.i @@ -0,0 +1,28 @@ +<!-- include start from firewall/connection-status.xml.i --> +<node name="connection-status"> + <properties> + <help>Connection status</help> + </properties> + <children> + <leafNode name="nat"> + <properties> + <help>NAT connection status</help> + <completionHelp> + <list>destination source</list> + </completionHelp> + <valueHelp> + <format>destination</format> + <description>Match connections that are subject to destination NAT</description> + </valueHelp> + <valueHelp> + <format>source</format> + <description>Match connections that are subject to source NAT</description> + </valueHelp> + <constraint> + <regex>(destination|source)</regex> + </constraint> + </properties> + </leafNode> + </children> +</node> +<!-- include end -->
\ No newline at end of file diff --git a/interface-definitions/include/firewall/fragment.xml.i b/interface-definitions/include/firewall/fragment.xml.i new file mode 100644 index 000000000..1f4c11055 --- /dev/null +++ b/interface-definitions/include/firewall/fragment.xml.i @@ -0,0 +1,21 @@ +<!-- include start from firewall/fragment.xml.i --> +<node name="fragment"> + <properties> + <help>IP fragment match</help> + </properties> + <children> + <leafNode name="match-frag"> + <properties> + <help>Second and further fragments of fragmented packets</help> + <valueless/> + </properties> + </leafNode> + <leafNode name="match-non-frag"> + <properties> + <help>Head fragments or unfragmented packets</help> + <valueless/> + </properties> + </leafNode> + </children> +</node> +<!-- include end -->
\ No newline at end of file diff --git a/interface-definitions/include/firewall/icmp.xml.i b/interface-definitions/include/firewall/icmp.xml.i new file mode 100644 index 000000000..deb50a410 --- /dev/null +++ b/interface-definitions/include/firewall/icmp.xml.i @@ -0,0 +1,34 @@ +<!-- include start from firewall/icmp.xml.i --> +<node name="icmp"> + <properties> + <help>ICMP type and code information</help> + </properties> + <children> + <leafNode name="code"> + <properties> + <help>ICMP code</help> + <valueHelp> + <format>u32:0-255</format> + <description>ICMP code (0-255)</description> + </valueHelp> + <constraint> + <validator name="numeric" argument="--range 0-255"/> + </constraint> + </properties> + </leafNode> + <leafNode name="type"> + <properties> + <help>ICMP type</help> + <valueHelp> + <format>u32:0-255</format> + <description>ICMP type (0-255)</description> + </valueHelp> + <constraint> + <validator name="numeric" argument="--range 0-255"/> + </constraint> + </properties> + </leafNode> + #include <include/firewall/icmp-type-name.xml.i> + </children> +</node> +<!-- include end -->
\ No newline at end of file diff --git a/interface-definitions/include/firewall/icmpv6.xml.i b/interface-definitions/include/firewall/icmpv6.xml.i new file mode 100644 index 000000000..c0118626e --- /dev/null +++ b/interface-definitions/include/firewall/icmpv6.xml.i @@ -0,0 +1,34 @@ +<!-- include start from firewall/icmpv6.xml.i --> +<node name="icmpv6"> + <properties> + <help>ICMPv6 type and code information</help> + </properties> + <children> + <leafNode name="code"> + <properties> + <help>ICMPv6 code</help> + <valueHelp> + <format>u32:0-255</format> + <description>ICMPv6 code (0-255)</description> + </valueHelp> + <constraint> + <validator name="numeric" argument="--range 0-255"/> + </constraint> + </properties> + </leafNode> + <leafNode name="type"> + <properties> + <help>ICMPv6 type</help> + <valueHelp> + <format>u32:0-255</format> + <description>ICMPv6 type (0-255)</description> + </valueHelp> + <constraint> + <validator name="numeric" argument="--range 0-255"/> + </constraint> + </properties> + </leafNode> + #include <include/firewall/icmpv6-type-name.xml.i> + </children> +</node> +<!-- include end -->
\ No newline at end of file diff --git a/interface-definitions/include/firewall/ipv4-hook-output.xml.i b/interface-definitions/include/firewall/ipv4-hook-output.xml.i index 2b537ce5e..ca47ae09b 100644 --- a/interface-definitions/include/firewall/ipv4-hook-output.xml.i +++ b/interface-definitions/include/firewall/ipv4-hook-output.xml.i @@ -31,6 +31,33 @@ </tagNode> </children> </node> + <node name="raw"> + <properties> + <help>IPv4 firewall output raw</help> + </properties> + <children> + #include <include/firewall/default-action-base-chains.xml.i> + #include <include/firewall/default-log.xml.i> + #include <include/generic-description.xml.i> + <tagNode name="rule"> + <properties> + <help>IPv4 Firewall output raw rule number</help> + <valueHelp> + <format>u32:1-999999</format> + <description>Number for this firewall rule</description> + </valueHelp> + <constraint> + <validator name="numeric" argument="--range 1-999999"/> + </constraint> + <constraintErrorMessage>Firewall rule number must be between 1 and 999999</constraintErrorMessage> + </properties> + <children> + #include <include/firewall/common-rule-ipv4-raw.xml.i> + #include <include/firewall/outbound-interface.xml.i> + </children> + </tagNode> + </children> + </node> </children> </node> <!-- include end --> diff --git a/interface-definitions/include/firewall/ipv4-hook-prerouting.xml.i b/interface-definitions/include/firewall/ipv4-hook-prerouting.xml.i index c38918375..17ecfe824 100644 --- a/interface-definitions/include/firewall/ipv4-hook-prerouting.xml.i +++ b/interface-definitions/include/firewall/ipv4-hook-prerouting.xml.i @@ -4,40 +4,6 @@ <help>IPv4 prerouting firewall</help> </properties> <children> - <node name="filter"> - <properties> - <help>IPv4 firewall prerouting filter</help> - </properties> - <children> - #include <include/firewall/default-action-base-chains.xml.i> - #include <include/generic-description.xml.i> - <tagNode name="rule"> - <properties> - <help>IPv4 Firewall prerouting filter rule number</help> - <valueHelp> - <format>u32:1-999999</format> - <description>Number for this firewall rule</description> - </valueHelp> - <constraint> - <validator name="numeric" argument="--range 1-999999"/> - </constraint> - <constraintErrorMessage>Firewall rule number must be between 1 and 999999</constraintErrorMessage> - </properties> - <children> - #include <include/firewall/common-rule-ipv4.xml.i> - #include <include/firewall/inbound-interface.xml.i> - <leafNode name="jump-target"> - <properties> - <help>Set jump target. Action jump must be defined to use this setting</help> - <completionHelp> - <path>firewall ipv4 name</path> - </completionHelp> - </properties> - </leafNode> - </children> - </tagNode> - </children> - </node> <node name="raw"> <properties> <help>IPv4 firewall prerouting raw</help> diff --git a/interface-definitions/include/firewall/ipv6-hook-output.xml.i b/interface-definitions/include/firewall/ipv6-hook-output.xml.i index ffe1c72b8..f877cfaaf 100644 --- a/interface-definitions/include/firewall/ipv6-hook-output.xml.i +++ b/interface-definitions/include/firewall/ipv6-hook-output.xml.i @@ -31,6 +31,33 @@ </tagNode> </children> </node> + <node name="raw"> + <properties> + <help>IPv6 firewall output raw</help> + </properties> + <children> + #include <include/firewall/default-action-base-chains.xml.i> + #include <include/firewall/default-log.xml.i> + #include <include/generic-description.xml.i> + <tagNode name="rule"> + <properties> + <help>IPv6 Firewall output raw rule number</help> + <valueHelp> + <format>u32:1-999999</format> + <description>Number for this firewall rule</description> + </valueHelp> + <constraint> + <validator name="numeric" argument="--range 1-999999"/> + </constraint> + <constraintErrorMessage>Firewall rule number must be between 1 and 999999</constraintErrorMessage> + </properties> + <children> + #include <include/firewall/common-rule-ipv6-raw.xml.i> + #include <include/firewall/outbound-interface.xml.i> + </children> + </tagNode> + </children> + </node> </children> </node> <!-- include end --> diff --git a/interface-definitions/include/firewall/ipv6-hook-prerouting.xml.i b/interface-definitions/include/firewall/ipv6-hook-prerouting.xml.i new file mode 100644 index 000000000..3f384828d --- /dev/null +++ b/interface-definitions/include/firewall/ipv6-hook-prerouting.xml.i @@ -0,0 +1,51 @@ +<!-- include start from firewall/ipv6-hook-prerouting.xml.i --> +<node name="prerouting"> + <properties> + <help>IPv6 prerouting firewall</help> + </properties> + <children> + <node name="raw"> + <properties> + <help>IPv6 firewall prerouting raw</help> + </properties> + <children> + #include <include/firewall/default-action-base-chains.xml.i> + #include <include/generic-description.xml.i> + <leafNode name="default-jump-target"> + <properties> + <help>Set jump target. Action jump must be defined in default-action to use this setting</help> + <completionHelp> + <path>firewall ipv6 name</path> + </completionHelp> + </properties> + </leafNode> + <tagNode name="rule"> + <properties> + <help>IPv6 Firewall prerouting raw rule number</help> + <valueHelp> + <format>u32:1-999999</format> + <description>Number for this firewall rule</description> + </valueHelp> + <constraint> + <validator name="numeric" argument="--range 1-999999"/> + </constraint> + <constraintErrorMessage>Firewall rule number must be between 1 and 999999</constraintErrorMessage> + </properties> + <children> + #include <include/firewall/common-rule-ipv6-raw.xml.i> + #include <include/firewall/inbound-interface.xml.i> + <leafNode name="jump-target"> + <properties> + <help>Set jump target. Action jump must be defined to use this setting</help> + <completionHelp> + <path>firewall ipv6 name</path> + </completionHelp> + </properties> + </leafNode> + </children> + </tagNode> + </children> + </node> + </children> +</node> +<!-- include end -->
\ No newline at end of file diff --git a/interface-definitions/include/firewall/limit.xml.i b/interface-definitions/include/firewall/limit.xml.i new file mode 100644 index 000000000..21068dec2 --- /dev/null +++ b/interface-definitions/include/firewall/limit.xml.i @@ -0,0 +1,33 @@ +<!-- include start from firewall/limit.xml.i --> +<node name="limit"> + <properties> + <help>Rate limit using a token bucket filter</help> + </properties> + <children> + <leafNode name="burst"> + <properties> + <help>Maximum number of packets to allow in excess of rate</help> + <valueHelp> + <format>u32:0-4294967295</format> + <description>Maximum number of packets to allow in excess of rate</description> + </valueHelp> + <constraint> + <validator name="numeric" argument="--range 0-4294967295"/> + </constraint> + </properties> + </leafNode> + <leafNode name="rate"> + <properties> + <help>Maximum average matching rate</help> + <valueHelp> + <format>txt</format> + <description>integer/unit (Example: 5/minute)</description> + </valueHelp> + <constraint> + <regex>\d+/(second|minute|hour|day)</regex> + </constraint> + </properties> + </leafNode> + </children> +</node> +<!-- include end -->
\ No newline at end of file diff --git a/interface-definitions/include/firewall/protocol.xml.i b/interface-definitions/include/firewall/protocol.xml.i new file mode 100644 index 000000000..e391cae41 --- /dev/null +++ b/interface-definitions/include/firewall/protocol.xml.i @@ -0,0 +1,34 @@ +<!-- include start from firewall/protocol.xml.i --> +<leafNode name="protocol"> + <properties> + <help>Protocol to match (protocol name, number, or "all")</help> + <completionHelp> + <script>${vyos_completion_dir}/list_protocols.sh</script> + <list>all tcp_udp</list> + </completionHelp> + <valueHelp> + <format>all</format> + <description>All IP protocols</description> + </valueHelp> + <valueHelp> + <format>tcp_udp</format> + <description>Both TCP and UDP</description> + </valueHelp> + <valueHelp> + <format>u32:0-255</format> + <description>IP protocol number</description> + </valueHelp> + <valueHelp> + <format><protocol></format> + <description>IP protocol name</description> + </valueHelp> + <valueHelp> + <format>!<protocol></format> + <description>IP protocol name</description> + </valueHelp> + <constraint> + <validator name="ip-protocol"/> + </constraint> + </properties> +</leafNode> +<!-- include end -->
\ No newline at end of file diff --git a/interface-definitions/include/firewall/recent.xml.i b/interface-definitions/include/firewall/recent.xml.i new file mode 100644 index 000000000..38f40b916 --- /dev/null +++ b/interface-definitions/include/firewall/recent.xml.i @@ -0,0 +1,44 @@ +<!-- include start from firewall/recent.xml.i --> +<node name="recent"> + <properties> + <help>Parameters for matching recently seen sources</help> + </properties> + <children> + <leafNode name="count"> + <properties> + <help>Source addresses seen more than N times</help> + <valueHelp> + <format>u32:1-255</format> + <description>Source addresses seen more than N times</description> + </valueHelp> + <constraint> + <validator name="numeric" argument="--range 1-255"/> + </constraint> + </properties> + </leafNode> + <leafNode name="time"> + <properties> + <help>Source addresses seen in the last second/minute/hour</help> + <completionHelp> + <list>second minute hour</list> + </completionHelp> + <valueHelp> + <format>second</format> + <description>Source addresses seen COUNT times in the last second</description> + </valueHelp> + <valueHelp> + <format>minute</format> + <description>Source addresses seen COUNT times in the last minute</description> + </valueHelp> + <valueHelp> + <format>hour</format> + <description>Source addresses seen COUNT times in the last hour</description> + </valueHelp> + <constraint> + <regex>(second|minute|hour)</regex> + </constraint> + </properties> + </leafNode> + </children> +</node> +<!-- include end -->
\ No newline at end of file diff --git a/interface-definitions/include/firewall/time.xml.i b/interface-definitions/include/firewall/time.xml.i new file mode 100644 index 000000000..7bd737450 --- /dev/null +++ b/interface-definitions/include/firewall/time.xml.i @@ -0,0 +1,70 @@ +<!-- include start from firewall/time.xml.i --> +<node name="time"> + <properties> + <help>Time to match rule</help> + </properties> + <children> + <leafNode name="startdate"> + <properties> + <help>Date to start matching rule</help> + <valueHelp> + <format>txt</format> + <description>Enter date using following notation - YYYY-MM-DD</description> + </valueHelp> + <constraint> + <regex>(\d{4}\-\d{2}\-\d{2})</regex> + </constraint> + </properties> + </leafNode> + <leafNode name="starttime"> + <properties> + <help>Time of day to start matching rule</help> + <valueHelp> + <format>txt</format> + <description>Enter time using using 24 hour notation - hh:mm:ss</description> + </valueHelp> + <constraint> + <regex>([0-2][0-9](\:[0-5][0-9]){1,2})</regex> + </constraint> + </properties> + </leafNode> + <leafNode name="stopdate"> + <properties> + <help>Date to stop matching rule</help> + <valueHelp> + <format>txt</format> + <description>Enter date using following notation - YYYY-MM-DD</description> + </valueHelp> + <constraint> + <regex>(\d{4}\-\d{2}\-\d{2})</regex> + </constraint> + </properties> + </leafNode> + <leafNode name="stoptime"> + <properties> + <help>Time of day to stop matching rule</help> + <valueHelp> + <format>txt</format> + <description>Enter time using using 24 hour notation - hh:mm:ss</description> + </valueHelp> + <constraint> + <regex>([0-2][0-9](\:[0-5][0-9]){1,2})</regex> + </constraint> + </properties> + </leafNode> + <leafNode name="weekdays"> + <properties> + <help>Comma separated weekdays to match rule on</help> + <valueHelp> + <format>txt</format> + <description>Name of day (Monday, Tuesday, Wednesday, Thursdays, Friday, Saturday, Sunday)</description> + </valueHelp> + <valueHelp> + <format>u32:0-6</format> + <description>Day number (0 = Sunday ... 6 = Saturday)</description> + </valueHelp> + </properties> + </leafNode> + </children> +</node> +<!-- include end -->
\ No newline at end of file diff --git a/interface-definitions/include/policy/route-common.xml.i b/interface-definitions/include/policy/route-common.xml.i index e412fe58e..97795601e 100644 --- a/interface-definitions/include/policy/route-common.xml.i +++ b/interface-definitions/include/policy/route-common.xml.i @@ -3,75 +3,9 @@ #include <include/generic-description.xml.i> #include <include/firewall/firewall-mark.xml.i> #include <include/generic-disable-node.xml.i> -<node name="fragment"> - <properties> - <help>IP fragment match</help> - </properties> - <children> - <leafNode name="match-frag"> - <properties> - <help>Second and further fragments of fragmented packets</help> - <valueless/> - </properties> - </leafNode> - <leafNode name="match-non-frag"> - <properties> - <help>Head fragments or unfragmented packets</help> - <valueless/> - </properties> - </leafNode> - </children> -</node> -<node name="ipsec"> - <properties> - <help>Inbound IPsec packets</help> - </properties> - <children> - <leafNode name="match-ipsec"> - <properties> - <help>Inbound IPsec packets</help> - <valueless/> - </properties> - </leafNode> - <leafNode name="match-none"> - <properties> - <help>Inbound non-IPsec packets</help> - <valueless/> - </properties> - </leafNode> - </children> -</node> -<node name="limit"> - <properties> - <help>Rate limit using a token bucket filter</help> - </properties> - <children> - <leafNode name="burst"> - <properties> - <help>Maximum number of packets to allow in excess of rate</help> - <valueHelp> - <format>u32:0-4294967295</format> - <description>Maximum number of packets to allow in excess of rate</description> - </valueHelp> - <constraint> - <validator name="numeric" argument="--range 0-4294967295"/> - </constraint> - </properties> - </leafNode> - <leafNode name="rate"> - <properties> - <help>Maximum average matching rate</help> - <valueHelp> - <format>u32:0-4294967295</format> - <description>Maximum average matching rate</description> - </valueHelp> - <constraint> - <validator name="numeric" argument="--range 0-4294967295"/> - </constraint> - </properties> - </leafNode> - </children> -</node> +#include <include/firewall/fragment.xml.i> +#include <include/firewall/match-ipsec.xml.i> +#include <include/firewall/limit.xml.i> #include <include/firewall/log.xml.i> <leafNode name="protocol"> <properties> diff --git a/interface-definitions/include/policy/route-ipv4.xml.i b/interface-definitions/include/policy/route-ipv4.xml.i index 1f717a1a4..c12abcae2 100644 --- a/interface-definitions/include/policy/route-ipv4.xml.i +++ b/interface-definitions/include/policy/route-ipv4.xml.i @@ -10,36 +10,5 @@ #include <include/firewall/port.xml.i> </children> </node> -<node name="icmp"> - <properties> - <help>ICMP type and code information</help> - </properties> - <children> - <leafNode name="code"> - <properties> - <help>ICMP code (0-255)</help> - <valueHelp> - <format>u32:0-255</format> - <description>ICMP code (0-255)</description> - </valueHelp> - <constraint> - <validator name="numeric" argument="--range 0-255"/> - </constraint> - </properties> - </leafNode> - <leafNode name="type"> - <properties> - <help>ICMP type (0-255)</help> - <valueHelp> - <format>u32:0-255</format> - <description>ICMP type (0-255)</description> - </valueHelp> - <constraint> - <validator name="numeric" argument="--range 0-255"/> - </constraint> - </properties> - </leafNode> - #include <include/firewall/icmp-type-name.xml.i> - </children> -</node> +#include <include/firewall/icmp.xml.i> <!-- include end --> diff --git a/python/vyos/firewall.py b/python/vyos/firewall.py index d7b7b80a8..664df28cc 100644 --- a/python/vyos/firewall.py +++ b/python/vyos/firewall.py @@ -178,6 +178,8 @@ def parse_rule(rule_conf, hook, fw_name, rule_id, ip_name): hook_name = 'input' if hook == 'OUT': hook_name = 'output' + if hook == 'PRE': + hook_name = 'prerouting' if hook == 'NAM': hook_name = f'name{def_suffix}' output.append(f'{ip_name} {prefix}addr {operator} @FQDN_{hook_name}_{fw_name}_{rule_id}_{prefix}') @@ -193,6 +195,8 @@ def parse_rule(rule_conf, hook, fw_name, rule_id, ip_name): hook_name = 'input' if hook == 'OUT': hook_name = 'output' + if hook == 'PRE': + hook_name = 'prerouting' if hook == 'NAM': hook_name = f'name' output.append(f'{ip_name} {prefix}addr {operator} @GEOIP_CC{def_suffix}_{hook_name}_{fw_name}_{rule_id}') @@ -477,8 +481,6 @@ def parse_rule(rule_conf, hook, fw_name, rule_id, ip_name): output.append(f'tcp option maxseg size set {mss}') if 'action' in rule_conf: - # Change action=return to action=action - # #output.append(nft_action(rule_conf['action'])) if rule_conf['action'] == 'offload': offload_target = rule_conf['offload_target'] output.append(f'flow add @VYOS_FLOWTABLE_{offload_target}') diff --git a/smoketest/scripts/cli/test_firewall.py b/smoketest/scripts/cli/test_firewall.py index c47562714..5cf2b2146 100755 --- a/smoketest/scripts/cli/test_firewall.py +++ b/smoketest/scripts/cli/test_firewall.py @@ -236,6 +236,14 @@ class TestFirewall(VyOSUnitTestSHIM.TestCase): self.cli_set(['firewall', 'ipv4', 'output', 'filter', 'rule', '6', 'protocol', 'icmp']) self.cli_set(['firewall', 'ipv4', 'output', 'filter', 'rule', '6', 'connection-mark', conn_mark]) + self.cli_set(['firewall', 'ipv4', 'output', 'raw', 'default-action', 'drop']) + self.cli_set(['firewall', 'ipv4', 'output', 'raw', 'rule', '1', 'action', 'accept']) + self.cli_set(['firewall', 'ipv4', 'output', 'raw', 'rule', '1', 'protocol', 'udp']) + + self.cli_set(['firewall', 'ipv4', 'prerouting', 'raw', 'rule', '1', 'action', 'drop']) + self.cli_set(['firewall', 'ipv4', 'prerouting', 'raw', 'rule', '1', 'protocol', 'tcp']) + self.cli_set(['firewall', 'ipv4', 'prerouting', 'raw', 'rule', '1', 'destination', 'port', '23']) + self.cli_commit() mark_hex = "{0:#010x}".format(int(conn_mark)) @@ -256,6 +264,14 @@ class TestFirewall(VyOSUnitTestSHIM.TestCase): ['meta l4proto gre', f'oifname != "{interface}"', 'drop'], ['meta l4proto icmp', f'ct mark {mark_hex}', 'return'], ['log prefix "[ipv4-OUT-filter-default-D]"','OUT-filter default-action drop', 'drop'], + ['chain VYOS_OUTPUT_raw'], + ['type filter hook output priority raw; policy accept;'], + ['udp', 'accept'], + ['OUT-raw default-action drop', 'drop'], + ['chain VYOS_PREROUTING_raw'], + ['type filter hook prerouting priority raw; policy accept;'], + ['tcp dport 23', 'drop'], + ['PRE-raw default-action accept', 'accept'], ['chain NAME_smoketest'], ['saddr 172.16.20.10', 'daddr 172.16.10.10', 'log prefix "[ipv4-NAM-smoketest-1-A]" log level debug', 'ip ttl 15', 'accept'], ['tcp flags syn / syn,ack', 'tcp dport 8888', 'log prefix "[ipv4-NAM-smoketest-2-R]" log level err', 'ip ttl > 102', 'reject'], @@ -446,16 +462,24 @@ class TestFirewall(VyOSUnitTestSHIM.TestCase): self.cli_set(['firewall', 'ipv6', 'forward', 'filter', 'rule', '2', 'destination', 'port', '8888']) self.cli_set(['firewall', 'ipv6', 'forward', 'filter', 'rule', '2', 'inbound-interface', 'name', interface]) + self.cli_set(['firewall', 'ipv6', 'input', 'filter', 'rule', '3', 'action', 'accept']) + self.cli_set(['firewall', 'ipv6', 'input', 'filter', 'rule', '3', 'protocol', 'udp']) + self.cli_set(['firewall', 'ipv6', 'input', 'filter', 'rule', '3', 'source', 'address', '2002::1:2']) + self.cli_set(['firewall', 'ipv6', 'input', 'filter', 'rule', '3', 'inbound-interface', 'name', interface]) + self.cli_set(['firewall', 'ipv6', 'output', 'filter', 'default-action', 'drop']) self.cli_set(['firewall', 'ipv6', 'output', 'filter', 'default-log']) self.cli_set(['firewall', 'ipv6', 'output', 'filter', 'rule', '3', 'action', 'return']) self.cli_set(['firewall', 'ipv6', 'output', 'filter', 'rule', '3', 'protocol', 'gre']) self.cli_set(['firewall', 'ipv6', 'output', 'filter', 'rule', '3', 'outbound-interface', 'name', interface]) - self.cli_set(['firewall', 'ipv6', 'input', 'filter', 'rule', '3', 'action', 'accept']) - self.cli_set(['firewall', 'ipv6', 'input', 'filter', 'rule', '3', 'protocol', 'udp']) - self.cli_set(['firewall', 'ipv6', 'input', 'filter', 'rule', '3', 'source', 'address', '2002::1:2']) - self.cli_set(['firewall', 'ipv6', 'input', 'filter', 'rule', '3', 'inbound-interface', 'name', interface]) + self.cli_set(['firewall', 'ipv6', 'output', 'raw', 'default-action', 'drop']) + self.cli_set(['firewall', 'ipv6', 'output', 'raw', 'rule', '1', 'action', 'accept']) + self.cli_set(['firewall', 'ipv6', 'output', 'raw', 'rule', '1', 'protocol', 'udp']) + + self.cli_set(['firewall', 'ipv6', 'prerouting', 'raw', 'rule', '1', 'action', 'drop']) + self.cli_set(['firewall', 'ipv6', 'prerouting', 'raw', 'rule', '1', 'protocol', 'tcp']) + self.cli_set(['firewall', 'ipv6', 'prerouting', 'raw', 'rule', '1', 'destination', 'port', '23']) self.cli_commit() @@ -472,6 +496,14 @@ class TestFirewall(VyOSUnitTestSHIM.TestCase): ['type filter hook output priority filter; policy accept;'], ['meta l4proto gre', f'oifname "{interface}"', 'return'], ['log prefix "[ipv6-OUT-filter-default-D]"','OUT-filter default-action drop', 'drop'], + ['chain VYOS_IPV6_OUTPUT_raw'], + ['type filter hook output priority raw; policy accept;'], + ['udp', 'accept'], + ['OUT-raw default-action drop', 'drop'], + ['chain VYOS_IPV6_PREROUTING_raw'], + ['type filter hook prerouting priority raw; policy accept;'], + ['tcp dport 23', 'drop'], + ['PRE-raw default-action accept', 'accept'], [f'chain NAME6_{name}'], ['saddr 2002::1', 'daddr 2002::1:1', 'log prefix "[ipv6-NAM-v6-smoketest-1-A]" log level crit', 'accept'], [f'"{name} default-action drop"', f'log prefix "[ipv6-{name}-default-D]"', 'drop'], diff --git a/src/conf_mode/firewall.py b/src/conf_mode/firewall.py index e96e57154..acf3805d2 100755 --- a/src/conf_mode/firewall.py +++ b/src/conf_mode/firewall.py @@ -351,7 +351,7 @@ def verify(firewall): verify_nested_group(group_name, group, groups, []) if 'ipv4' in firewall: - for name in ['name','forward','input','output']: + for name in ['name','forward','input','output', 'prerouting']: if name in firewall['ipv4']: for name_id, name_conf in firewall['ipv4'][name].items(): if 'jump' in name_conf['default_action'] and 'default_jump_target' not in name_conf: @@ -371,7 +371,7 @@ def verify(firewall): verify_rule(firewall, rule_conf, False) if 'ipv6' in firewall: - for name in ['name','forward','input','output']: + for name in ['name','forward','input','output', 'prerouting']: if name in firewall['ipv6']: for name_id, name_conf in firewall['ipv6'][name].items(): if 'jump' in name_conf['default_action'] and 'default_jump_target' not in name_conf: diff --git a/src/conf_mode/system_conntrack.py b/src/conf_mode/system_conntrack.py index 031fe63b0..d9c38fd95 100755 --- a/src/conf_mode/system_conntrack.py +++ b/src/conf_mode/system_conntrack.py @@ -18,6 +18,7 @@ import os from sys import exit +from vyos.base import Warning from vyos.config import Config from vyos.configdep import set_dependents, call_dependents from vyos.utils.dict import dict_search @@ -165,6 +166,8 @@ def verify(conntrack): if not group_obj: Warning(f'{error_group} "{group_name}" has no members!') + Warning(f'It is prefered to defined {inet} conntrack ignore rules in the <firewall {inet} prerouting raw> section') + if dict_search_args(conntrack, 'timeout', 'custom', inet, 'rule') != None: for rule, rule_config in conntrack['timeout']['custom'][inet]['rule'].items(): if 'protocol' not in rule_config: |