diff options
| -rw-r--r-- | data/templates/l2tp/chap-secrets.tmpl | 22 | ||||
| -rw-r--r-- | data/templates/l2tp/l2tp.config.tmpl | 346 | ||||
| -rw-r--r-- | data/templates/pppoe/ip-pre-up.script.tmpl | 38 | ||||
| -rw-r--r-- | data/templates/wifi/hostapd.conf.tmpl | 1432 | ||||
| -rw-r--r-- | data/templates/wifi/wpa_supplicant.conf.tmpl | 18 | ||||
| -rw-r--r-- | data/templates/wwan/chat.tmpl | 12 | ||||
| -rw-r--r-- | data/templates/wwan/ip-pre-up.script.tmpl | 46 | ||||
| -rwxr-xr-x | src/conf_mode/interfaces-wirelessmodem.py | 2 |
8 files changed, 958 insertions, 958 deletions
diff --git a/data/templates/l2tp/chap-secrets.tmpl b/data/templates/l2tp/chap-secrets.tmpl index ee47a583e..323528b3c 100644 --- a/data/templates/l2tp/chap-secrets.tmpl +++ b/data/templates/l2tp/chap-secrets.tmpl @@ -1,11 +1,11 @@ -# username server password acceptable local IP addresses shaper
-{% for user in authentication['local-users'] %}
-{% if authentication['local-users'][user]['state'] == 'enabled' %}
-{% if (authentication['local-users'][user]['upload']) and (authentication['local-users'][user]['download']) %}
-{{user}}\t*\t{{authentication['local-users'][user]['passwd']}}\t{{authentication['local-users'][user]['ip']}}\t\
-{{authentication['local-users'][user]['download']}}/{{authentication['local-users'][user]['upload']}}
-{% else %}
-{{user}}\t*\t{{authentication['local-users'][user]['passwd']}}\t{{authentication['local-users'][user]['ip']}}
-{% endif %}
-{% endif %}
-{% endfor %}
+# username server password acceptable local IP addresses shaper +{% for user in authentication['local-users'] %} +{% if authentication['local-users'][user]['state'] == 'enabled' %} +{% if (authentication['local-users'][user]['upload']) and (authentication['local-users'][user]['download']) %} +{{user}}\t*\t{{authentication['local-users'][user]['passwd']}}\t{{authentication['local-users'][user]['ip']}}\t\ +{{authentication['local-users'][user]['download']}}/{{authentication['local-users'][user]['upload']}} +{% else %} +{{user}}\t*\t{{authentication['local-users'][user]['passwd']}}\t{{authentication['local-users'][user]['ip']}} +{% endif %} +{% endif %} +{% endfor %} diff --git a/data/templates/l2tp/l2tp.config.tmpl b/data/templates/l2tp/l2tp.config.tmpl index 901b43d01..b8637e256 100644 --- a/data/templates/l2tp/l2tp.config.tmpl +++ b/data/templates/l2tp/l2tp.config.tmpl @@ -1,173 +1,173 @@ -### generated by accel_l2tp.py ###
-[modules]
-log_syslog
-l2tp
-chap-secrets
-{% for proto in authentication['auth_proto']: %}
-{{proto}}
-{% endfor%}
-{% if authentication['mode'] == 'radius' %}
-radius
-{% endif -%}
-ippool
-shaper
-ipv6pool
-ipv6_nd
-ipv6_dhcp
-
-[core]
-thread-count={{thread_cnt}}
-
-[log]
-syslog=accel-l2tp,daemon
-copy=1
-level=5
-
-{% if dns %}
-[dns]
-{% if dns[0] %}
-dns1={{dns[0]}}
-{% endif %}
-{% if dns[1] %}
-dns2={{dns[1]}}
-{% endif %}
-{% endif -%}
-
-{% if dnsv6 %}
-[ipv6-dns]
-{% for srv in dnsv6: %}
-{{srv}}
-{% endfor %}
-{% endif %}
-
-{% if wins %}
-[wins]
-{% if wins[0] %}
-wins1={{wins[0]}}
-{% endif %}
-{% if wins[1] %}
-wins2={{wins[1]}}
-{% endif %}
-{% endif -%}
-
-[l2tp]
-verbose=1
-ifname=l2tp%d
-ppp-max-mtu={{mtu}}
-mppe={{authentication['mppe']}}
-{% if outside_addr %}
-bind={{outside_addr}}
-{% endif %}
-{% if lns_shared_secret %}
-secret={{lns_shared_secret}}
-{% endif %}
-
-[client-ip-range]
-0.0.0.0/0
-
-{% if (client_ip_pool) or (client_ip_subnets) %}
-[ip-pool]
-{% if client_ip_pool %}
-{{client_ip_pool}}
-{% endif -%}
-{% if client_ip_subnets %}
-{% for sn in client_ip_subnets %}
-{{sn}}
-{% endfor -%}
-{% endif %}
-{% endif %}
-{% if gateway_address %}
-gw-ip-address={{gateway_address}}
-{% endif %}
-
-{% if authentication['mode'] == 'local' %}
-[chap-secrets]
-chap-secrets=/etc/accel-ppp/l2tp/chap-secrets
-{% if gateway_address %}
-gw-ip-address={{gateway_address}}
-{% endif %}
-{% endif %}
-
-[ppp]
-verbose=1
-check-ip=1
-single-session=replace
-{% if idle_timeout %}
-lcp-echo-timeout={{idle_timeout}}
-{% endif %}
-{% if ppp_options['lcp-echo-interval'] %}
-lcp-echo-interval={{ppp_options['lcp-echo-interval']}}
-{% else %}
-lcp-echo-interval=30
-{% endif %}
-{% if ppp_options['lcp-echo-failure'] %}
-lcp-echo-failure={{ppp_options['lcp-echo-failure']}}
-{% else %}
-lcp-echo-failure=3
-{% endif %}
-{% if ccp_disable %}
-ccp=0
-{% endif %}
-{% if client_ipv6_pool %}
-ipv6=allow
-{% endif %}
-
-{% if authentication['mode'] == 'radius' %}
-[radius]
-{% for rsrv in authentication['radiussrv']: %}
-server={{rsrv}},{{authentication['radiussrv'][rsrv]['secret']}},\
-req-limit={{authentication['radiussrv'][rsrv]['req-limit']}},\
-fail-time={{authentication['radiussrv'][rsrv]['fail-time']}}
-{% endfor %}
-{% if authentication['radiusopt']['timeout'] %}
-timeout={{authentication['radiusopt']['timeout']}}
-{% endif %}
-{% if authentication['radiusopt']['acct-timeout'] %}
-acct-timeout={{authentication['radiusopt']['acct-timeout']}}
-{% endif %}
-{% if authentication['radiusopt']['max-try'] %}
-max-try={{authentication['radiusopt']['max-try']}}
-{% endif %}
-{% if authentication['radiusopt']['nas-id'] %}
-nas-identifier={{authentication['radiusopt']['nas-id']}}
-{% endif %}
-{% if authentication['radius_source_address'] %}
-nas-ip-address={{authentication['radius_source_address']}}
-{% endif -%}
-{% if authentication['radiusopt']['dae-srv'] %}
-dae-server={{authentication['radiusopt']['dae-srv']['ip-addr']}}:\
-{{authentication['radiusopt']['dae-srv']['port']}},\
-{{authentication['radiusopt']['dae-srv']['secret']}}
-{% endif -%}
-gw-ip-address={{gateway_address}}
-verbose=1
-{% endif -%}
-
-{% if client_ipv6_pool %}
-[ipv6-pool]
-{% for prfx in client_ipv6_pool.prefix: %}
-{{prfx}}
-{% endfor %}
-{% for prfx in client_ipv6_pool.delegate_prefix: %}
-delegate={{prfx}}
-{% endfor %}
-{% endif %}
-
-{% if client_ipv6_pool['delegate_prefix'] %}
-[ipv6-dhcp]
-verbose=1
-{% endif %}
-
-{% if authentication['radiusopt']['shaper'] %}
-[shaper]
-verbose=1
-attr={{authentication['radiusopt']['shaper']['attr']}}
-{% if authentication['radiusopt']['shaper']['vendor'] %}
-vendor={{authentication['radiusopt']['shaper']['vendor']}}
-{% endif -%}
-{% endif %}
-
-[cli]
-tcp=127.0.0.1:2004
-sessions-columns=ifname,username,calling-sid,ip,{{ip6_column}}{{ip6_dp_column}}rate-limit,type,comp,state,rx-bytes,tx-bytes,uptime
-
+### generated by accel_l2tp.py ### +[modules] +log_syslog +l2tp +chap-secrets +{% for proto in authentication['auth_proto']: %} +{{proto}} +{% endfor%} +{% if authentication['mode'] == 'radius' %} +radius +{% endif -%} +ippool +shaper +ipv6pool +ipv6_nd +ipv6_dhcp + +[core] +thread-count={{thread_cnt}} + +[log] +syslog=accel-l2tp,daemon +copy=1 +level=5 + +{% if dns %} +[dns] +{% if dns[0] %} +dns1={{dns[0]}} +{% endif %} +{% if dns[1] %} +dns2={{dns[1]}} +{% endif %} +{% endif -%} + +{% if dnsv6 %} +[ipv6-dns] +{% for srv in dnsv6: %} +{{srv}} +{% endfor %} +{% endif %} + +{% if wins %} +[wins] +{% if wins[0] %} +wins1={{wins[0]}} +{% endif %} +{% if wins[1] %} +wins2={{wins[1]}} +{% endif %} +{% endif -%} + +[l2tp] +verbose=1 +ifname=l2tp%d +ppp-max-mtu={{mtu}} +mppe={{authentication['mppe']}} +{% if outside_addr %} +bind={{outside_addr}} +{% endif %} +{% if lns_shared_secret %} +secret={{lns_shared_secret}} +{% endif %} + +[client-ip-range] +0.0.0.0/0 + +{% if (client_ip_pool) or (client_ip_subnets) %} +[ip-pool] +{% if client_ip_pool %} +{{client_ip_pool}} +{% endif -%} +{% if client_ip_subnets %} +{% for sn in client_ip_subnets %} +{{sn}} +{% endfor -%} +{% endif %} +{% endif %} +{% if gateway_address %} +gw-ip-address={{gateway_address}} +{% endif %} + +{% if authentication['mode'] == 'local' %} +[chap-secrets] +chap-secrets=/etc/accel-ppp/l2tp/chap-secrets +{% if gateway_address %} +gw-ip-address={{gateway_address}} +{% endif %} +{% endif %} + +[ppp] +verbose=1 +check-ip=1 +single-session=replace +{% if idle_timeout %} +lcp-echo-timeout={{idle_timeout}} +{% endif %} +{% if ppp_options['lcp-echo-interval'] %} +lcp-echo-interval={{ppp_options['lcp-echo-interval']}} +{% else %} +lcp-echo-interval=30 +{% endif %} +{% if ppp_options['lcp-echo-failure'] %} +lcp-echo-failure={{ppp_options['lcp-echo-failure']}} +{% else %} +lcp-echo-failure=3 +{% endif %} +{% if ccp_disable %} +ccp=0 +{% endif %} +{% if client_ipv6_pool %} +ipv6=allow +{% endif %} + +{% if authentication['mode'] == 'radius' %} +[radius] +{% for rsrv in authentication['radiussrv']: %} +server={{rsrv}},{{authentication['radiussrv'][rsrv]['secret']}},\ +req-limit={{authentication['radiussrv'][rsrv]['req-limit']}},\ +fail-time={{authentication['radiussrv'][rsrv]['fail-time']}} +{% endfor %} +{% if authentication['radiusopt']['timeout'] %} +timeout={{authentication['radiusopt']['timeout']}} +{% endif %} +{% if authentication['radiusopt']['acct-timeout'] %} +acct-timeout={{authentication['radiusopt']['acct-timeout']}} +{% endif %} +{% if authentication['radiusopt']['max-try'] %} +max-try={{authentication['radiusopt']['max-try']}} +{% endif %} +{% if authentication['radiusopt']['nas-id'] %} +nas-identifier={{authentication['radiusopt']['nas-id']}} +{% endif %} +{% if authentication['radius_source_address'] %} +nas-ip-address={{authentication['radius_source_address']}} +{% endif -%} +{% if authentication['radiusopt']['dae-srv'] %} +dae-server={{authentication['radiusopt']['dae-srv']['ip-addr']}}:\ +{{authentication['radiusopt']['dae-srv']['port']}},\ +{{authentication['radiusopt']['dae-srv']['secret']}} +{% endif -%} +gw-ip-address={{gateway_address}} +verbose=1 +{% endif -%} + +{% if client_ipv6_pool %} +[ipv6-pool] +{% for prfx in client_ipv6_pool.prefix: %} +{{prfx}} +{% endfor %} +{% for prfx in client_ipv6_pool.delegate_prefix: %} +delegate={{prfx}} +{% endfor %} +{% endif %} + +{% if client_ipv6_pool['delegate_prefix'] %} +[ipv6-dhcp] +verbose=1 +{% endif %} + +{% if authentication['radiusopt']['shaper'] %} +[shaper] +verbose=1 +attr={{authentication['radiusopt']['shaper']['attr']}} +{% if authentication['radiusopt']['shaper']['vendor'] %} +vendor={{authentication['radiusopt']['shaper']['vendor']}} +{% endif -%} +{% endif %} + +[cli] +tcp=127.0.0.1:2004 +sessions-columns=ifname,username,calling-sid,ip,{{ip6_column}}{{ip6_dp_column}}rate-limit,type,comp,state,rx-bytes,tx-bytes,uptime + diff --git a/data/templates/pppoe/ip-pre-up.script.tmpl b/data/templates/pppoe/ip-pre-up.script.tmpl index f72781e41..9a7ba7d57 100644 --- a/data/templates/pppoe/ip-pre-up.script.tmpl +++ b/data/templates/pppoe/ip-pre-up.script.tmpl @@ -1,19 +1,19 @@ -#!/bin/sh
-
-# As PPPoE is an "on demand" interface we need to re-configure it when it
-# becomes up
-
-if [ "$6" != "{{ intf }}" ]; then
- exit
-fi
-
-# add some info to syslog
-DIALER_PID=$(cat /var/run/{{ intf }}.pid)
-logger -t pppd[$DIALER_PID] "executing $0"
-
-echo "{{ description }}" > /sys/class/net/{{ intf }}/ifalias
-
-{% if vrf -%}
-logger -t pppd[$DIALER_PID] "configuring dialer interface $6 for VRF {{ vrf }}"
-ip link set dev {{ intf }} master {{ vrf }}
-{% endif %}
+#!/bin/sh + +# As PPPoE is an "on demand" interface we need to re-configure it when it +# becomes up + +if [ "$6" != "{{ intf }}" ]; then + exit +fi + +# add some info to syslog +DIALER_PID=$(cat /var/run/{{ intf }}.pid) +logger -t pppd[$DIALER_PID] "executing $0" + +echo "{{ description }}" > /sys/class/net/{{ intf }}/ifalias + +{% if vrf -%} +logger -t pppd[$DIALER_PID] "configuring dialer interface $6 for VRF {{ vrf }}" +ip link set dev {{ intf }} master {{ vrf }} +{% endif %} diff --git a/data/templates/wifi/hostapd.conf.tmpl b/data/templates/wifi/hostapd.conf.tmpl index 8505119e7..bd2132b27 100644 --- a/data/templates/wifi/hostapd.conf.tmpl +++ b/data/templates/wifi/hostapd.conf.tmpl @@ -1,716 +1,716 @@ -### Autogenerated by interfaces-wireless.py ###
-{% if description %}
-# Description: {{ description }}
-# User-friendly description of device; up to 32 octets encoded in UTF-8
-device_name={{ description | truncate(32, True) }}
-{% endif %}
-
-# AP netdevice name (without 'ap' postfix, i.e., wlan0 uses wlan0ap for
-# management frames with the Host AP driver); wlan0 with many nl80211 drivers
-# Note: This attribute can be overridden by the values supplied with the '-i'
-# command line parameter.
-interface={{ intf }}
-
-# Driver interface type (hostap/wired/none/nl80211/bsd);
-# default: hostap). nl80211 is used with all Linux mac80211 drivers.
-# Use driver=none if building hostapd as a standalone RADIUS server that does
-# not control any wireless/wired driver.
-driver=nl80211
-
-# Levels (minimum value for logged events):
-# 0 = verbose debugging
-# 1 = debugging
-# 2 = informational messages
-# 3 = notification
-# 4 = warning
-logger_syslog=-1
-logger_syslog_level=0
-logger_stdout=-1
-logger_stdout_level=0
-
-{%- if country_code %}
-
-# Country code (ISO/IEC 3166-1). Used to set regulatory domain.
-# Set as needed to indicate country in which device is operating.
-# This can limit available channels and transmit power.
-country_code={{ country_code }}
-
-# Enable IEEE 802.11d. This advertises the country_code and the set of allowed
-# channels and transmit power levels based on the regulatory limits. The
-# country_code setting must be configured with the correct country for
-# IEEE 802.11d functions.
-ieee80211d=1
-{% endif %}
-
-{%- if ssid %}
-
-# SSID to be used in IEEE 802.11 management frames
-ssid={{ ssid }}
-{% endif %}
-
-{%- if channel %}
-
-# Channel number (IEEE 802.11)
-# (default: 0, i.e., not set)
-# Please note that some drivers do not use this value from hostapd and the
-# channel will need to be configured separately with iwconfig.
-#
-# If CONFIG_ACS build option is enabled, the channel can be selected
-# automatically at run time by setting channel=acs_survey or channel=0, both of
-# which will enable the ACS survey based algorithm.
-channel={{ channel }}
-{% endif %}
-
-{%- if mode %}
-
-# Operation mode (a = IEEE 802.11a (5 GHz), b = IEEE 802.11b (2.4 GHz),
-# g = IEEE 802.11g (2.4 GHz), ad = IEEE 802.11ad (60 GHz); a/g options are used
-# with IEEE 802.11n (HT), too, to specify band). For IEEE 802.11ac (VHT), this
-# needs to be set to hw_mode=a. For IEEE 802.11ax (HE) on 6 GHz this needs
-# to be set to hw_mode=a. When using ACS (see channel parameter), a
-# special value "any" can be used to indicate that any support band can be used.
-# This special case is currently supported only with drivers with which
-# offloaded ACS is used.
-{% if 'n' in mode -%}
-hw_mode=g
-ieee80211n=1
-{% elif 'ac' in mode -%}
-hw_mode=a
-ieee80211h=1
-ieee80211ac=1
-{% else -%}
-hw_mode={{ mode }}
-{% endif %}
-{% endif %}
-
-# ieee80211w: Whether management frame protection (MFP) is enabled
-# 0 = disabled (default)
-# 1 = optional
-# 2 = required
-{% if 'disabled' in mgmt_frame_protection -%}
-ieee80211w=0
-{% elif 'optional' in mgmt_frame_protection -%}
-ieee80211w=1
-{% elif 'required' in mgmt_frame_protection -%}
-ieee80211w=2
-{% endif %}
-
-# ht_capab: HT capabilities (list of flags)
-# LDPC coding capability: [LDPC] = supported
-# Supported channel width set: [HT40-] = both 20 MHz and 40 MHz with secondary
-# channel below the primary channel; [HT40+] = both 20 MHz and 40 MHz
-# with secondary channel above the primary channel
-# (20 MHz only if neither is set)
-# Note: There are limits on which channels can be used with HT40- and
-# HT40+. Following table shows the channels that may be available for
-# HT40- and HT40+ use per IEEE 802.11n Annex J:
-# freq HT40- HT40+
-# 2.4 GHz 5-13 1-7 (1-9 in Europe/Japan)
-# 5 GHz 40,48,56,64 36,44,52,60
-# (depending on the location, not all of these channels may be available
-# for use)
-# Please note that 40 MHz channels may switch their primary and secondary
-# channels if needed or creation of 40 MHz channel maybe rejected based
-# on overlapping BSSes. These changes are done automatically when hostapd
-# is setting up the 40 MHz channel.
-# Spatial Multiplexing (SM) Power Save: [SMPS-STATIC] or [SMPS-DYNAMIC]
-# (SMPS disabled if neither is set)
-# HT-greenfield: [GF] (disabled if not set)
-# Short GI for 20 MHz: [SHORT-GI-20] (disabled if not set)
-# Short GI for 40 MHz: [SHORT-GI-40] (disabled if not set)
-# Tx STBC: [TX-STBC] (disabled if not set)
-# Rx STBC: [RX-STBC1] (one spatial stream), [RX-STBC12] (one or two spatial
-# streams), or [RX-STBC123] (one, two, or three spatial streams); Rx STBC
-# disabled if none of these set
-# HT-delayed Block Ack: [DELAYED-BA] (disabled if not set)
-# Maximum A-MSDU length: [MAX-AMSDU-7935] for 7935 octets (3839 octets if not
-# set)
-# DSSS/CCK Mode in 40 MHz: [DSSS_CCK-40] = allowed (not allowed if not set)
-# 40 MHz intolerant [40-INTOLERANT] (not advertised if not set)
-# L-SIG TXOP protection support: [LSIG-TXOP-PROT] (disabled if not set)
-{% if cap_ht %}
-ht_capab=
-{%- endif -%}
-
-{%- if cap_ht_40mhz_incapable -%}
-[40-INTOLERANT]
-{%- endif -%}
-
-{%- if cap_ht_delayed_block_ack -%}
-[DELAYED-BA]
-{%- endif -%}
-
-{%- if cap_ht_dsss_cck_40 -%}
-[DSSS_CCK-40]
-{%- endif -%}
-
-{%- if cap_ht_greenfield -%}
-[GF]
-{%- endif -%}
-
-{%- if cap_ht_ldpc -%}
-[LDPC]
-{%- endif -%}
-
-{%- if cap_ht_lsig_protection -%}
-[LSIG-TXOP-PROT]
-{%- endif -%}
-
-{%- if cap_ht_max_amsdu -%}
-[MAX-AMSDU-{{ cap_ht_max_amsdu }}]
-{%- endif -%}
-
-{%- if cap_ht_smps -%}
-[SMPS-{{ cap_ht_smps | upper }}]
-{%- endif -%}
-
-{%- if cap_ht_chan_set_width -%}
-{%- for csw in cap_ht_chan_set_width -%}
-[{{ csw | upper }}]
-{%- endfor -%}
-{%- endif -%}
-
-{%- if cap_ht_short_gi -%}
-{%- for gi in cap_ht_short_gi -%}
-[SHORT-GI-{{ gi }}]
-{%- endfor -%}
-{%- endif -%}
-
-{%- if cap_ht_stbc_tx -%}
-[TX-STBC]
-{%- endif -%}
-{%- if cap_ht_stbc_rx -%}
-[RX-STBC{{ cap_ht_stbc_rx }}]
-{%- endif %}
-
-# Required for full HT and VHT functionality
-wme_enabled=1
-
-{% if cap_ht_powersave -%}
-# WMM-PS Unscheduled Automatic Power Save Delivery [U-APSD]
-# Enable this flag if U-APSD supported outside hostapd (eg., Firmware/driver)
-uapsd_advertisement_enabled=1
-{%- endif %}
-
-{% if cap_req_ht -%}
-# Require stations to support HT PHY (reject association if they do not)
-require_ht=1
-{% endif %}
-
-{%- if cap_vht_chan_set_width -%}
-vht_oper_chwidth={{ cap_vht_chan_set_width }}
-{%- endif -%}
-
-# vht_capab: VHT capabilities (list of flags)
-#
-# vht_max_mpdu_len: [MAX-MPDU-7991] [MAX-MPDU-11454]
-# Indicates maximum MPDU length
-# 0 = 3895 octets (default)
-# 1 = 7991 octets
-# 2 = 11454 octets
-# 3 = reserved
-#
-# supported_chan_width: [VHT160] [VHT160-80PLUS80]
-# Indicates supported Channel widths
-# 0 = 160 MHz & 80+80 channel widths are not supported (default)
-# 1 = 160 MHz channel width is supported
-# 2 = 160 MHz & 80+80 channel widths are supported
-# 3 = reserved
-#
-# Rx LDPC coding capability: [RXLDPC]
-# Indicates support for receiving LDPC coded pkts
-# 0 = Not supported (default)
-# 1 = Supported
-#
-# Short GI for 80 MHz: [SHORT-GI-80]
-# Indicates short GI support for reception of packets transmitted with TXVECTOR
-# params format equal to VHT and CBW = 80Mhz
-# 0 = Not supported (default)
-# 1 = Supported
-#
-# Short GI for 160 MHz: [SHORT-GI-160]
-# Indicates short GI support for reception of packets transmitted with TXVECTOR
-# params format equal to VHT and CBW = 160Mhz
-# 0 = Not supported (default)
-# 1 = Supported
-#
-# Tx STBC: [TX-STBC-2BY1]
-# Indicates support for the transmission of at least 2x1 STBC
-# 0 = Not supported (default)
-# 1 = Supported
-#
-# Rx STBC: [RX-STBC-1] [RX-STBC-12] [RX-STBC-123] [RX-STBC-1234]
-# Indicates support for the reception of PPDUs using STBC
-# 0 = Not supported (default)
-# 1 = support of one spatial stream
-# 2 = support of one and two spatial streams
-# 3 = support of one, two and three spatial streams
-# 4 = support of one, two, three and four spatial streams
-# 5,6,7 = reserved
-#
-# SU Beamformer Capable: [SU-BEAMFORMER]
-# Indicates support for operation as a single user beamformer
-# 0 = Not supported (default)
-# 1 = Supported
-#
-# SU Beamformee Capable: [SU-BEAMFORMEE]
-# Indicates support for operation as a single user beamformee
-# 0 = Not supported (default)
-# 1 = Supported
-#
-# Compressed Steering Number of Beamformer Antennas Supported:
-# [BF-ANTENNA-2] [BF-ANTENNA-3] [BF-ANTENNA-4]
-# Beamformee's capability indicating the maximum number of beamformer
-# antennas the beamformee can support when sending compressed beamforming
-# feedback
-# If SU beamformer capable, set to maximum value minus 1
-# else reserved (default)
-#
-# Number of Sounding Dimensions:
-# [SOUNDING-DIMENSION-2] [SOUNDING-DIMENSION-3] [SOUNDING-DIMENSION-4]
-# Beamformer's capability indicating the maximum value of the NUM_STS parameter
-# in the TXVECTOR of a VHT NDP
-# If SU beamformer capable, set to maximum value minus 1
-# else reserved (default)
-#
-# MU Beamformer Capable: [MU-BEAMFORMER]
-# Indicates support for operation as an MU beamformer
-# 0 = Not supported or sent by Non-AP STA (default)
-# 1 = Supported
-#
-# VHT TXOP PS: [VHT-TXOP-PS]
-# Indicates whether or not the AP supports VHT TXOP Power Save Mode
-# or whether or not the STA is in VHT TXOP Power Save mode
-# 0 = VHT AP doesn't support VHT TXOP PS mode (OR) VHT STA not in VHT TXOP PS
-# mode
-# 1 = VHT AP supports VHT TXOP PS mode (OR) VHT STA is in VHT TXOP power save
-# mode
-#
-# +HTC-VHT Capable: [HTC-VHT]
-# Indicates whether or not the STA supports receiving a VHT variant HT Control
-# field.
-# 0 = Not supported (default)
-# 1 = supported
-#
-# Maximum A-MPDU Length Exponent: [MAX-A-MPDU-LEN-EXP0]..[MAX-A-MPDU-LEN-EXP7]
-# Indicates the maximum length of A-MPDU pre-EOF padding that the STA can recv
-# This field is an integer in the range of 0 to 7.
-# The length defined by this field is equal to
-# 2 pow(13 + Maximum A-MPDU Length Exponent) -1 octets
-#
-# VHT Link Adaptation Capable: [VHT-LINK-ADAPT2] [VHT-LINK-ADAPT3]
-# Indicates whether or not the STA supports link adaptation using VHT variant
-# HT Control field
-# If +HTC-VHTcapable is 1
-# 0 = (no feedback) if the STA does not provide VHT MFB (default)
-# 1 = reserved
-# 2 = (Unsolicited) if the STA provides only unsolicited VHT MFB
-# 3 = (Both) if the STA can provide VHT MFB in response to VHT MRQ and if the
-# STA provides unsolicited VHT MFB
-# Reserved if +HTC-VHTcapable is 0
-#
-# Rx Antenna Pattern Consistency: [RX-ANTENNA-PATTERN]
-# Indicates the possibility of Rx antenna pattern change
-# 0 = Rx antenna pattern might change during the lifetime of an association
-# 1 = Rx antenna pattern does not change during the lifetime of an association
-#
-# Tx Antenna Pattern Consistency: [TX-ANTENNA-PATTERN]
-# Indicates the possibility of Tx antenna pattern change
-# 0 = Tx antenna pattern might change during the lifetime of an association
-# 1 = Tx antenna pattern does not change during the lifetime of an association
-{% if cap_vht %}
-vht_capab=
-{%- endif -%}
-
-{%- if cap_vht_max_mpdu -%}
-[MAX-MPDU-{{ cap_vht_max_mpdu }}]
-{%- endif -%}
-
-{%- if cap_vht_max_mpdu_exp -%}
-[MAX-A-MPDU-LEN-EXP{{ cap_vht_max_mpdu_exp }}]
-{%- endif -%}
-
-{%- if cap_vht_chan_set_width -%}
-{%- if '2' in cap_vht_chan_set_width -%}
-[VHT160]
-{%- elif '3' in cap_vht_chan_set_width -%}
-[VHT160-80PLUS80]
-{%- endif -%}
-{%- endif -%}
-
-{%- if cap_vht_stbc_tx -%}
-[TX-STBC-2BY1]
-{%- endif -%}
-
-{%- if cap_vht_stbc_rx -%}
-[RX-STBC-{{ cap_vht_stbc_rx }}]
-{%- endif -%}
-
-{%- if cap_vht_link_adaptation -%}
-{%- if 'unsolicited' in cap_vht_link_adaptation -%}
-[VHT-LINK-ADAPT2]
-{%- elif 'both' in cap_vht_link_adaptation -%}
-[VHT-LINK-ADAPT3]
-{%- endif -%}
-{%- endif -%}
-
-{%- if cap_vht_short_gi -%}
-{%- for gi in cap_vht_short_gi -%}
-[SHORT-GI-{{ gi }}]
-{%- endfor -%}
-{%- endif -%}
-
-{%- if cap_vht_ldpc -%}
-[RXLDPC]
-{%- endif -%}
-
-{%- if cap_vht_tx_powersave -%}
-[VHT-TXOP-PS]
-{%- endif -%}
-
-{%- if cap_vht_vht_cf -%}
-[HTC-VHT]
-{%- endif -%}
-
-{%- if cap_vht_beamform -%}
-{%- for beamform in cap_vht_beamform -%}
-{%- if 'single-user-beamformer' in beamform -%}
-[SU-BEAMFORMER]
-{%- elif 'single-user-beamformee' in beamform -%}
-[SU-BEAMFORMEE]
-{%- elif 'multi-user-beamformer' in beamform -%}
-[MU-BEAMFORMER]
-{%- elif 'multi-user-beamformee' in beamform -%}
-[MU-BEAMFORMEE]
-{%- endif -%}
-{%- endfor -%}
-{%- endif -%}
-
-{%- if cap_vht_antenna_fixed -%}
-[RX-ANTENNA-PATTERN][TX-ANTENNA-PATTERN]
-{%- endif -%}
-
-{%- if cap_vht_antenna_cnt -%}
-{%- for beamform in cap_vht_beamform -%}
-{%- if 'single-user-beamformer' in beamform -%}
-[BF-ANTENNA-{{ cap_vht_antenna_cnt|int -1 }}][SOUNDING-DIMENSION-{{ cap_vht_antenna_cnt|int -1}}]
-{%- else -%}
-[BF-ANTENNA-{{ cap_vht_antenna_cnt }}][SOUNDING-DIMENSION-{{ cap_vht_antenna_cnt }}]
-{%- endif -%}
-{%- endfor -%}
-{%- endif %}
-
-# ieee80211n: Whether IEEE 802.11n (HT) is enabled
-# 0 = disabled (default)
-# 1 = enabled
-# Note: You will also need to enable WMM for full HT functionality.
-# Note: hw_mode=g (2.4 GHz) and hw_mode=a (5 GHz) is used to specify the band.
-{% if cap_req_vht -%}
-ieee80211n=0
-# Require stations to support VHT PHY (reject association if they do not)
-require_vht=1
-{% endif %}
-
-{% if cap_vht_center_freq_1 -%}
-# center freq = 5 GHz + (5 * index)
-# So index 42 gives center freq 5.210 GHz
-# which is channel 42 in 5G band
-vht_oper_centr_freq_seg0_idx={{ cap_vht_center_freq_1 }}
-{% endif %}
-
-{% if cap_vht_center_freq_2 -%}
-# center freq = 5 GHz + (5 * index)
-# So index 159 gives center freq 5.795 GHz
-# which is channel 159 in 5G band
-vht_oper_centr_freq_seg1_idx={{ cap_vht_center_freq_2 }}
-{% endif %}
-
-{% if disable_broadcast_ssid -%}
-# Send empty SSID in beacons and ignore probe request frames that do not
-# specify full SSID, i.e., require stations to know SSID.
-# default: disabled (0)
-# 1 = send empty (length=0) SSID in beacon and ignore probe request for
-# broadcast SSID
-# 2 = clear SSID (ASCII 0), but keep the original length (this may be required
-# with some clients that do not support empty SSID) and ignore probe
-# requests for broadcast SSID
-ignore_broadcast_ssid=1
-{% endif %}
-
-# Station MAC address -based authentication
-# Please note that this kind of access control requires a driver that uses
-# hostapd to take care of management frame processing and as such, this can be
-# used with driver=hostap or driver=nl80211, but not with driver=atheros.
-# 0 = accept unless in deny list
-# 1 = deny unless in accept list
-# 2 = use external RADIUS server (accept/deny lists are searched first)
-macaddr_acl=0
-
-{% if max_stations -%}
-# Maximum number of stations allowed in station table. New stations will be
-# rejected after the station table is full. IEEE 802.11 has a limit of 2007
-# different association IDs, so this number should not be larger than that.
-# (default: 2007)
-max_num_sta={{ max_stations }}
-{% endif %}
-
-{% if isolate_stations -%}
-# Client isolation can be used to prevent low-level bridging of frames between
-# associated stations in the BSS. By default, this bridging is allowed.
-ap_isolate=1
-{% endif %}
-
-{% if reduce_transmit_power -%}
-# Add Power Constraint element to Beacon and Probe Response frames
-# This config option adds Power Constraint element when applicable and Country
-# element is added. Power Constraint element is required by Transmit Power
-# Control. This can be used only with ieee80211d=1.
-# Valid values are 0..255.
-local_pwr_constraint={{ reduce_transmit_power }}
-{% endif %}
-
-{% if expunge_failing_stations -%}
-# Disassociate stations based on excessive transmission failures or other
-# indications of connection loss. This depends on the driver capabilities and
-# may not be available with all drivers.
-disassoc_low_ack=1
-{% endif %}
-
-{% if sec_wep -%}
-# IEEE 802.11 specifies two authentication algorithms. hostapd can be
-# configured to allow both of these or only one. Open system authentication
-# should be used with IEEE 802.1X.
-# Bit fields of allowed authentication algorithms:
-# bit 0 = Open System Authentication
-# bit 1 = Shared Key Authentication (requires WEP)
-auth_algs=2
-
-# WEP rekeying (disabled if key lengths are not set or are set to 0)
-# Key lengths for default/broadcast and individual/unicast keys:
-# 5 = 40-bit WEP (also known as 64-bit WEP with 40 secret bits)
-# 13 = 104-bit WEP (also known as 128-bit WEP with 104 secret bits)
-wep_key_len_broadcast=5
-wep_key_len_unicast=5
-
-# Static WEP key configuration
-#
-# The key number to use when transmitting.
-# It must be between 0 and 3, and the corresponding key must be set.
-# default: not set
-wep_default_key=0
-
-# The WEP keys to use.
-# A key may be a quoted string or unquoted hexadecimal digits.
-# The key length should be 5, 13, or 16 characters, or 10, 26, or 32
-# digits, depending on whether 40-bit (64-bit), 104-bit (128-bit), or
-# 128-bit (152-bit) WEP is used.
-# Only the default key must be supplied; the others are optional.
-{% if sec_wep_key -%}
-{% for key in sec_wep_key -%}
-wep_key{{ loop.index -1 }}={{ key}}
-{% endfor %}
-{%- endif %}
-
-{% elif sec_wpa -%}
-##### WPA/IEEE 802.11i configuration ##########################################
-
-# Enable WPA. Setting this variable configures the AP to require WPA (either
-# WPA-PSK or WPA-RADIUS/EAP based on other configuration). For WPA-PSK, either
-# wpa_psk or wpa_passphrase must be set and wpa_key_mgmt must include WPA-PSK.
-# Instead of wpa_psk / wpa_passphrase, wpa_psk_radius might suffice.
-# For WPA-RADIUS/EAP, ieee8021x must be set (but without dynamic WEP keys),
-# RADIUS authentication server must be configured, and WPA-EAP must be included
-# in wpa_key_mgmt.
-# This field is a bit field that can be used to enable WPA (IEEE 802.11i/D3.0)
-# and/or WPA2 (full IEEE 802.11i/RSN):
-# bit0 = WPA
-# bit1 = IEEE 802.11i/RSN (WPA2) (dot11RSNAEnabled)
-{% if 'both' in sec_wpa_mode -%}
-wpa=3
-{%- elif 'wpa2' in sec_wpa_mode -%}
-wpa=2
-{%- elif 'wpa' in sec_wpa_mode -%}
-wpa=1
-{%- endif %}
-
-{% if sec_wpa_cipher -%}
-# Set of accepted cipher suites (encryption algorithms) for pairwise keys
-# (unicast packets). This is a space separated list of algorithms:
-# CCMP = AES in Counter mode with CBC-MAC (CCMP-128)
-# TKIP = Temporal Key Integrity Protocol
-# CCMP-256 = AES in Counter mode with CBC-MAC with 256-bit key
-# GCMP = Galois/counter mode protocol (GCMP-128)
-# GCMP-256 = Galois/counter mode protocol with 256-bit key
-# Group cipher suite (encryption algorithm for broadcast and multicast frames)
-# is automatically selected based on this configuration. If only CCMP is
-# allowed as the pairwise cipher, group cipher will also be CCMP. Otherwise,
-# TKIP will be used as the group cipher. The optional group_cipher parameter can
-# be used to override this automatic selection.
-{% if 'wpa2' in sec_wpa_mode -%}
-# Pairwise cipher for RSN/WPA2 (default: use wpa_pairwise value)
-rsn_pairwise={{ sec_wpa_cipher | join(" ") }}
-{% else -%}
-# Pairwise cipher for WPA (v1) (default: TKIP)
-wpa_pairwise={{ sec_wpa_cipher | join(" ") }}
-{%- endif -%}
-{% endif %}
-
-{% if sec_wpa_passphrase -%}
-# IEEE 802.11 specifies two authentication algorithms. hostapd can be
-# configured to allow both of these or only one. Open system authentication
-# should be used with IEEE 802.1X.
-# Bit fields of allowed authentication algorithms:
-# bit 0 = Open System Authentication
-# bit 1 = Shared Key Authentication (requires WEP)
-auth_algs=1
-
-# WPA pre-shared keys for WPA-PSK. This can be either entered as a 256-bit
-# secret in hex format (64 hex digits), wpa_psk, or as an ASCII passphrase
-# (8..63 characters) that will be converted to PSK. This conversion uses SSID
-# so the PSK changes when ASCII passphrase is used and the SSID is changed.
-wpa_passphrase={{ sec_wpa_passphrase }}
-
-# Set of accepted key management algorithms (WPA-PSK, WPA-EAP, or both). The
-# entries are separated with a space. WPA-PSK-SHA256 and WPA-EAP-SHA256 can be
-# added to enable SHA256-based stronger algorithms.
-# WPA-PSK = WPA-Personal / WPA2-Personal
-# WPA-PSK-SHA256 = WPA2-Personal using SHA256
-wpa_key_mgmt=WPA-PSK
-
-{% elif sec_wpa_radius -%}
-##### IEEE 802.1X-2004 related configuration ##################################
-# Require IEEE 802.1X authorization
-ieee8021x=1
-
-# Set of accepted key management algorithms (WPA-PSK, WPA-EAP, or both). The
-# entries are separated with a space. WPA-PSK-SHA256 and WPA-EAP-SHA256 can be
-# added to enable SHA256-based stronger algorithms.
-# WPA-EAP = WPA-Enterprise / WPA2-Enterprise
-# WPA-EAP-SHA256 = WPA2-Enterprise using SHA256
-wpa_key_mgmt=WPA-EAP
-
-{% if sec_wpa_radius_source -%}
-# RADIUS client forced local IP address for the access point
-# Normally the local IP address is determined automatically based on configured
-# IP addresses, but this field can be used to force a specific address to be
-# used, e.g., when the device has multiple IP addresses.
-radius_client_addr={{ sec_wpa_radius_source }}
-
-# The own IP address of the access point (used as NAS-IP-Address)
-own_ip_addr={{ sec_wpa_radius_source }}
-{% else %}
-# The own IP address of the access point (used as NAS-IP-Address)
-own_ip_addr=127.0.0.1
-{% endif %}
-
-{% for radius in sec_wpa_radius -%}
-{%- if not radius.disabled -%}
-# RADIUS authentication server
-auth_server_addr={{ radius.server }}
-auth_server_port={{ radius.port }}
-auth_server_shared_secret={{ radius.key }}
-{% if radius.acc_port -%}
-# RADIUS accounting server
-acct_server_addr={{ radius.server }}
-acct_server_port={{ radius.acc_port }}
-acct_server_shared_secret={{ radius.key }}
-{% endif %}
-{% endif %}
-{% endfor %}
-
-{% endif %}
-
-{% else %}
-# Open system
-auth_algs=1
-{% endif %}
-
-# TX queue parameters (EDCF / bursting)
-# tx_queue_<queue name>_<param>
-# queues: data0, data1, data2, data3
-# (data0 is the highest priority queue)
-# parameters:
-# aifs: AIFS (default 2)
-# cwmin: cwMin (1, 3, 7, 15, 31, 63, 127, 255, 511, 1023, 2047, 4095, 8191,
-# 16383, 32767)
-# cwmax: cwMax (same values as cwMin, cwMax >= cwMin)
-# burst: maximum length (in milliseconds with precision of up to 0.1 ms) for
-# bursting
-#
-# Default WMM parameters (IEEE 802.11 draft; 11-03-0504-03-000e):
-# These parameters are used by the access point when transmitting frames
-# to the clients.
-#
-# Low priority / AC_BK = background
-tx_queue_data3_aifs=7
-tx_queue_data3_cwmin=15
-tx_queue_data3_cwmax=1023
-tx_queue_data3_burst=0
-# Note: for IEEE 802.11b mode: cWmin=31 cWmax=1023 burst=0
-#
-# Normal priority / AC_BE = best effort
-tx_queue_data2_aifs=3
-tx_queue_data2_cwmin=15
-tx_queue_data2_cwmax=63
-tx_queue_data2_burst=0
-# Note: for IEEE 802.11b mode: cWmin=31 cWmax=127 burst=0
-#
-# High priority / AC_VI = video
-tx_queue_data1_aifs=1
-tx_queue_data1_cwmin=7
-tx_queue_data1_cwmax=15
-tx_queue_data1_burst=3.0
-# Note: for IEEE 802.11b mode: cWmin=15 cWmax=31 burst=6.0
-#
-# Highest priority / AC_VO = voice
-tx_queue_data0_aifs=1
-tx_queue_data0_cwmin=3
-tx_queue_data0_cwmax=7
-tx_queue_data0_burst=1.5
-
-# Default WMM parameters (IEEE 802.11 draft; 11-03-0504-03-000e):
-# for 802.11a or 802.11g networks
-# These parameters are sent to WMM clients when they associate.
-# The parameters will be used by WMM clients for frames transmitted to the
-# access point.
-#
-# note - txop_limit is in units of 32microseconds
-# note - acm is admission control mandatory flag. 0 = admission control not
-# required, 1 = mandatory
-# note - Here cwMin and cmMax are in exponent form. The actual cw value used
-# will be (2^n)-1 where n is the value given here. The allowed range for these
-# wmm_ac_??_{cwmin,cwmax} is 0..15 with cwmax >= cwmin.
-#
-wmm_enabled=1
-
-# Low priority / AC_BK = background
-wmm_ac_bk_cwmin=4
-wmm_ac_bk_cwmax=10
-wmm_ac_bk_aifs=7
-wmm_ac_bk_txop_limit=0
-wmm_ac_bk_acm=0
-# Note: for IEEE 802.11b mode: cWmin=5 cWmax=10
-#
-# Normal priority / AC_BE = best effort
-wmm_ac_be_aifs=3
-wmm_ac_be_cwmin=4
-wmm_ac_be_cwmax=10
-wmm_ac_be_txop_limit=0
-wmm_ac_be_acm=0
-# Note: for IEEE 802.11b mode: cWmin=5 cWmax=7
-#
-# High priority / AC_VI = video
-wmm_ac_vi_aifs=2
-wmm_ac_vi_cwmin=3
-wmm_ac_vi_cwmax=4
-wmm_ac_vi_txop_limit=94
-wmm_ac_vi_acm=0
-# Note: for IEEE 802.11b mode: cWmin=4 cWmax=5 txop_limit=188
-#
-# Highest priority / AC_VO = voice
-wmm_ac_vo_aifs=2
-wmm_ac_vo_cwmin=2
-wmm_ac_vo_cwmax=3
-wmm_ac_vo_txop_limit=47
-wmm_ac_vo_acm=0
-
+### Autogenerated by interfaces-wireless.py ### +{% if description %} +# Description: {{ description }} +# User-friendly description of device; up to 32 octets encoded in UTF-8 +device_name={{ description | truncate(32, True) }} +{% endif %} + +# AP netdevice name (without 'ap' postfix, i.e., wlan0 uses wlan0ap for +# management frames with the Host AP driver); wlan0 with many nl80211 drivers +# Note: This attribute can be overridden by the values supplied with the '-i' +# command line parameter. +interface={{ intf }} + +# Driver interface type (hostap/wired/none/nl80211/bsd); +# default: hostap). nl80211 is used with all Linux mac80211 drivers. +# Use driver=none if building hostapd as a standalone RADIUS server that does +# not control any wireless/wired driver. +driver=nl80211 + +# Levels (minimum value for logged events): +# 0 = verbose debugging +# 1 = debugging +# 2 = informational messages +# 3 = notification +# 4 = warning +logger_syslog=-1 +logger_syslog_level=0 +logger_stdout=-1 +logger_stdout_level=0 + +{%- if country_code %} + +# Country code (ISO/IEC 3166-1). Used to set regulatory domain. +# Set as needed to indicate country in which device is operating. +# This can limit available channels and transmit power. +country_code={{ country_code }} + +# Enable IEEE 802.11d. This advertises the country_code and the set of allowed +# channels and transmit power levels based on the regulatory limits. The +# country_code setting must be configured with the correct country for +# IEEE 802.11d functions. +ieee80211d=1 +{% endif %} + +{%- if ssid %} + +# SSID to be used in IEEE 802.11 management frames +ssid={{ ssid }} +{% endif %} + +{%- if channel %} + +# Channel number (IEEE 802.11) +# (default: 0, i.e., not set) +# Please note that some drivers do not use this value from hostapd and the +# channel will need to be configured separately with iwconfig. +# +# If CONFIG_ACS build option is enabled, the channel can be selected +# automatically at run time by setting channel=acs_survey or channel=0, both of +# which will enable the ACS survey based algorithm. +channel={{ channel }} +{% endif %} + +{%- if mode %} + +# Operation mode (a = IEEE 802.11a (5 GHz), b = IEEE 802.11b (2.4 GHz), +# g = IEEE 802.11g (2.4 GHz), ad = IEEE 802.11ad (60 GHz); a/g options are used +# with IEEE 802.11n (HT), too, to specify band). For IEEE 802.11ac (VHT), this +# needs to be set to hw_mode=a. For IEEE 802.11ax (HE) on 6 GHz this needs +# to be set to hw_mode=a. When using ACS (see channel parameter), a +# special value "any" can be used to indicate that any support band can be used. +# This special case is currently supported only with drivers with which +# offloaded ACS is used. +{% if 'n' in mode -%} +hw_mode=g +ieee80211n=1 +{% elif 'ac' in mode -%} +hw_mode=a +ieee80211h=1 +ieee80211ac=1 +{% else -%} +hw_mode={{ mode }} +{% endif %} +{% endif %} + +# ieee80211w: Whether management frame protection (MFP) is enabled +# 0 = disabled (default) +# 1 = optional +# 2 = required +{% if 'disabled' in mgmt_frame_protection -%} +ieee80211w=0 +{% elif 'optional' in mgmt_frame_protection -%} +ieee80211w=1 +{% elif 'required' in mgmt_frame_protection -%} +ieee80211w=2 +{% endif %} + +# ht_capab: HT capabilities (list of flags) +# LDPC coding capability: [LDPC] = supported +# Supported channel width set: [HT40-] = both 20 MHz and 40 MHz with secondary +# channel below the primary channel; [HT40+] = both 20 MHz and 40 MHz +# with secondary channel above the primary channel +# (20 MHz only if neither is set) +# Note: There are limits on which channels can be used with HT40- and +# HT40+. Following table shows the channels that may be available for +# HT40- and HT40+ use per IEEE 802.11n Annex J: +# freq HT40- HT40+ +# 2.4 GHz 5-13 1-7 (1-9 in Europe/Japan) +# 5 GHz 40,48,56,64 36,44,52,60 +# (depending on the location, not all of these channels may be available +# for use) +# Please note that 40 MHz channels may switch their primary and secondary +# channels if needed or creation of 40 MHz channel maybe rejected based +# on overlapping BSSes. These changes are done automatically when hostapd +# is setting up the 40 MHz channel. +# Spatial Multiplexing (SM) Power Save: [SMPS-STATIC] or [SMPS-DYNAMIC] +# (SMPS disabled if neither is set) +# HT-greenfield: [GF] (disabled if not set) +# Short GI for 20 MHz: [SHORT-GI-20] (disabled if not set) +# Short GI for 40 MHz: [SHORT-GI-40] (disabled if not set) +# Tx STBC: [TX-STBC] (disabled if not set) +# Rx STBC: [RX-STBC1] (one spatial stream), [RX-STBC12] (one or two spatial +# streams), or [RX-STBC123] (one, two, or three spatial streams); Rx STBC +# disabled if none of these set +# HT-delayed Block Ack: [DELAYED-BA] (disabled if not set) +# Maximum A-MSDU length: [MAX-AMSDU-7935] for 7935 octets (3839 octets if not +# set) +# DSSS/CCK Mode in 40 MHz: [DSSS_CCK-40] = allowed (not allowed if not set) +# 40 MHz intolerant [40-INTOLERANT] (not advertised if not set) +# L-SIG TXOP protection support: [LSIG-TXOP-PROT] (disabled if not set) +{% if cap_ht %} +ht_capab= +{%- endif -%} + +{%- if cap_ht_40mhz_incapable -%} +[40-INTOLERANT] +{%- endif -%} + +{%- if cap_ht_delayed_block_ack -%} +[DELAYED-BA] +{%- endif -%} + +{%- if cap_ht_dsss_cck_40 -%} +[DSSS_CCK-40] +{%- endif -%} + +{%- if cap_ht_greenfield -%} +[GF] +{%- endif -%} + +{%- if cap_ht_ldpc -%} +[LDPC] +{%- endif -%} + +{%- if cap_ht_lsig_protection -%} +[LSIG-TXOP-PROT] +{%- endif -%} + +{%- if cap_ht_max_amsdu -%} +[MAX-AMSDU-{{ cap_ht_max_amsdu }}] +{%- endif -%} + +{%- if cap_ht_smps -%} +[SMPS-{{ cap_ht_smps | upper }}] +{%- endif -%} + +{%- if cap_ht_chan_set_width -%} +{%- for csw in cap_ht_chan_set_width -%} +[{{ csw | upper }}] +{%- endfor -%} +{%- endif -%} + +{%- if cap_ht_short_gi -%} +{%- for gi in cap_ht_short_gi -%} +[SHORT-GI-{{ gi }}] +{%- endfor -%} +{%- endif -%} + +{%- if cap_ht_stbc_tx -%} +[TX-STBC] +{%- endif -%} +{%- if cap_ht_stbc_rx -%} +[RX-STBC{{ cap_ht_stbc_rx }}] +{%- endif %} + +# Required for full HT and VHT functionality +wme_enabled=1 + +{% if cap_ht_powersave -%} +# WMM-PS Unscheduled Automatic Power Save Delivery [U-APSD] +# Enable this flag if U-APSD supported outside hostapd (eg., Firmware/driver) +uapsd_advertisement_enabled=1 +{%- endif %} + +{% if cap_req_ht -%} +# Require stations to support HT PHY (reject association if they do not) +require_ht=1 +{% endif %} + +{%- if cap_vht_chan_set_width -%} +vht_oper_chwidth={{ cap_vht_chan_set_width }} +{%- endif -%} + +# vht_capab: VHT capabilities (list of flags) +# +# vht_max_mpdu_len: [MAX-MPDU-7991] [MAX-MPDU-11454] +# Indicates maximum MPDU length +# 0 = 3895 octets (default) +# 1 = 7991 octets +# 2 = 11454 octets +# 3 = reserved +# +# supported_chan_width: [VHT160] [VHT160-80PLUS80] +# Indicates supported Channel widths +# 0 = 160 MHz & 80+80 channel widths are not supported (default) +# 1 = 160 MHz channel width is supported +# 2 = 160 MHz & 80+80 channel widths are supported +# 3 = reserved +# +# Rx LDPC coding capability: [RXLDPC] +# Indicates support for receiving LDPC coded pkts +# 0 = Not supported (default) +# 1 = Supported +# +# Short GI for 80 MHz: [SHORT-GI-80] +# Indicates short GI support for reception of packets transmitted with TXVECTOR +# params format equal to VHT and CBW = 80Mhz +# 0 = Not supported (default) +# 1 = Supported +# +# Short GI for 160 MHz: [SHORT-GI-160] +# Indicates short GI support for reception of packets transmitted with TXVECTOR +# params format equal to VHT and CBW = 160Mhz +# 0 = Not supported (default) +# 1 = Supported +# +# Tx STBC: [TX-STBC-2BY1] +# Indicates support for the transmission of at least 2x1 STBC +# 0 = Not supported (default) +# 1 = Supported +# +# Rx STBC: [RX-STBC-1] [RX-STBC-12] [RX-STBC-123] [RX-STBC-1234] +# Indicates support for the reception of PPDUs using STBC +# 0 = Not supported (default) +# 1 = support of one spatial stream +# 2 = support of one and two spatial streams +# 3 = support of one, two and three spatial streams +# 4 = support of one, two, three and four spatial streams +# 5,6,7 = reserved +# +# SU Beamformer Capable: [SU-BEAMFORMER] +# Indicates support for operation as a single user beamformer +# 0 = Not supported (default) +# 1 = Supported +# +# SU Beamformee Capable: [SU-BEAMFORMEE] +# Indicates support for operation as a single user beamformee +# 0 = Not supported (default) +# 1 = Supported +# +# Compressed Steering Number of Beamformer Antennas Supported: +# [BF-ANTENNA-2] [BF-ANTENNA-3] [BF-ANTENNA-4] +# Beamformee's capability indicating the maximum number of beamformer +# antennas the beamformee can support when sending compressed beamforming +# feedback +# If SU beamformer capable, set to maximum value minus 1 +# else reserved (default) +# +# Number of Sounding Dimensions: +# [SOUNDING-DIMENSION-2] [SOUNDING-DIMENSION-3] [SOUNDING-DIMENSION-4] +# Beamformer's capability indicating the maximum value of the NUM_STS parameter +# in the TXVECTOR of a VHT NDP +# If SU beamformer capable, set to maximum value minus 1 +# else reserved (default) +# +# MU Beamformer Capable: [MU-BEAMFORMER] +# Indicates support for operation as an MU beamformer +# 0 = Not supported or sent by Non-AP STA (default) +# 1 = Supported +# +# VHT TXOP PS: [VHT-TXOP-PS] +# Indicates whether or not the AP supports VHT TXOP Power Save Mode +# or whether or not the STA is in VHT TXOP Power Save mode +# 0 = VHT AP doesn't support VHT TXOP PS mode (OR) VHT STA not in VHT TXOP PS +# mode +# 1 = VHT AP supports VHT TXOP PS mode (OR) VHT STA is in VHT TXOP power save +# mode +# +# +HTC-VHT Capable: [HTC-VHT] +# Indicates whether or not the STA supports receiving a VHT variant HT Control +# field. +# 0 = Not supported (default) +# 1 = supported +# +# Maximum A-MPDU Length Exponent: [MAX-A-MPDU-LEN-EXP0]..[MAX-A-MPDU-LEN-EXP7] +# Indicates the maximum length of A-MPDU pre-EOF padding that the STA can recv +# This field is an integer in the range of 0 to 7. +# The length defined by this field is equal to +# 2 pow(13 + Maximum A-MPDU Length Exponent) -1 octets +# +# VHT Link Adaptation Capable: [VHT-LINK-ADAPT2] [VHT-LINK-ADAPT3] +# Indicates whether or not the STA supports link adaptation using VHT variant +# HT Control field +# If +HTC-VHTcapable is 1 +# 0 = (no feedback) if the STA does not provide VHT MFB (default) +# 1 = reserved +# 2 = (Unsolicited) if the STA provides only unsolicited VHT MFB +# 3 = (Both) if the STA can provide VHT MFB in response to VHT MRQ and if the +# STA provides unsolicited VHT MFB +# Reserved if +HTC-VHTcapable is 0 +# +# Rx Antenna Pattern Consistency: [RX-ANTENNA-PATTERN] +# Indicates the possibility of Rx antenna pattern change +# 0 = Rx antenna pattern might change during the lifetime of an association +# 1 = Rx antenna pattern does not change during the lifetime of an association +# +# Tx Antenna Pattern Consistency: [TX-ANTENNA-PATTERN] +# Indicates the possibility of Tx antenna pattern change +# 0 = Tx antenna pattern might change during the lifetime of an association +# 1 = Tx antenna pattern does not change during the lifetime of an association +{% if cap_vht %} +vht_capab= +{%- endif -%} + +{%- if cap_vht_max_mpdu -%} +[MAX-MPDU-{{ cap_vht_max_mpdu }}] +{%- endif -%} + +{%- if cap_vht_max_mpdu_exp -%} +[MAX-A-MPDU-LEN-EXP{{ cap_vht_max_mpdu_exp }}] +{%- endif -%} + +{%- if cap_vht_chan_set_width -%} +{%- if '2' in cap_vht_chan_set_width -%} +[VHT160] +{%- elif '3' in cap_vht_chan_set_width -%} +[VHT160-80PLUS80] +{%- endif -%} +{%- endif -%} + +{%- if cap_vht_stbc_tx -%} +[TX-STBC-2BY1] +{%- endif -%} + +{%- if cap_vht_stbc_rx -%} +[RX-STBC-{{ cap_vht_stbc_rx }}] +{%- endif -%} + +{%- if cap_vht_link_adaptation -%} +{%- if 'unsolicited' in cap_vht_link_adaptation -%} +[VHT-LINK-ADAPT2] +{%- elif 'both' in cap_vht_link_adaptation -%} +[VHT-LINK-ADAPT3] +{%- endif -%} +{%- endif -%} + +{%- if cap_vht_short_gi -%} +{%- for gi in cap_vht_short_gi -%} +[SHORT-GI-{{ gi }}] +{%- endfor -%} +{%- endif -%} + +{%- if cap_vht_ldpc -%} +[RXLDPC] +{%- endif -%} + +{%- if cap_vht_tx_powersave -%} +[VHT-TXOP-PS] +{%- endif -%} + +{%- if cap_vht_vht_cf -%} +[HTC-VHT] +{%- endif -%} + +{%- if cap_vht_beamform -%} +{%- for beamform in cap_vht_beamform -%} +{%- if 'single-user-beamformer' in beamform -%} +[SU-BEAMFORMER] +{%- elif 'single-user-beamformee' in beamform -%} +[SU-BEAMFORMEE] +{%- elif 'multi-user-beamformer' in beamform -%} +[MU-BEAMFORMER] +{%- elif 'multi-user-beamformee' in beamform -%} +[MU-BEAMFORMEE] +{%- endif -%} +{%- endfor -%} +{%- endif -%} + +{%- if cap_vht_antenna_fixed -%} +[RX-ANTENNA-PATTERN][TX-ANTENNA-PATTERN] +{%- endif -%} + +{%- if cap_vht_antenna_cnt -%} +{%- for beamform in cap_vht_beamform -%} +{%- if 'single-user-beamformer' in beamform -%} +[BF-ANTENNA-{{ cap_vht_antenna_cnt|int -1 }}][SOUNDING-DIMENSION-{{ cap_vht_antenna_cnt|int -1}}] +{%- else -%} +[BF-ANTENNA-{{ cap_vht_antenna_cnt }}][SOUNDING-DIMENSION-{{ cap_vht_antenna_cnt }}] +{%- endif -%} +{%- endfor -%} +{%- endif %} + +# ieee80211n: Whether IEEE 802.11n (HT) is enabled +# 0 = disabled (default) +# 1 = enabled +# Note: You will also need to enable WMM for full HT functionality. +# Note: hw_mode=g (2.4 GHz) and hw_mode=a (5 GHz) is used to specify the band. +{% if cap_req_vht -%} +ieee80211n=0 +# Require stations to support VHT PHY (reject association if they do not) +require_vht=1 +{% endif %} + +{% if cap_vht_center_freq_1 -%} +# center freq = 5 GHz + (5 * index) +# So index 42 gives center freq 5.210 GHz +# which is channel 42 in 5G band +vht_oper_centr_freq_seg0_idx={{ cap_vht_center_freq_1 }} +{% endif %} + +{% if cap_vht_center_freq_2 -%} +# center freq = 5 GHz + (5 * index) +# So index 159 gives center freq 5.795 GHz +# which is channel 159 in 5G band +vht_oper_centr_freq_seg1_idx={{ cap_vht_center_freq_2 }} +{% endif %} + +{% if disable_broadcast_ssid -%} +# Send empty SSID in beacons and ignore probe request frames that do not +# specify full SSID, i.e., require stations to know SSID. +# default: disabled (0) +# 1 = send empty (length=0) SSID in beacon and ignore probe request for +# broadcast SSID +# 2 = clear SSID (ASCII 0), but keep the original length (this may be required +# with some clients that do not support empty SSID) and ignore probe +# requests for broadcast SSID +ignore_broadcast_ssid=1 +{% endif %} + +# Station MAC address -based authentication +# Please note that this kind of access control requires a driver that uses +# hostapd to take care of management frame processing and as such, this can be +# used with driver=hostap or driver=nl80211, but not with driver=atheros. +# 0 = accept unless in deny list +# 1 = deny unless in accept list +# 2 = use external RADIUS server (accept/deny lists are searched first) +macaddr_acl=0 + +{% if max_stations -%} +# Maximum number of stations allowed in station table. New stations will be +# rejected after the station table is full. IEEE 802.11 has a limit of 2007 +# different association IDs, so this number should not be larger than that. +# (default: 2007) +max_num_sta={{ max_stations }} +{% endif %} + +{% if isolate_stations -%} +# Client isolation can be used to prevent low-level bridging of frames between +# associated stations in the BSS. By default, this bridging is allowed. +ap_isolate=1 +{% endif %} + +{% if reduce_transmit_power -%} +# Add Power Constraint element to Beacon and Probe Response frames +# This config option adds Power Constraint element when applicable and Country +# element is added. Power Constraint element is required by Transmit Power +# Control. This can be used only with ieee80211d=1. +# Valid values are 0..255. +local_pwr_constraint={{ reduce_transmit_power }} +{% endif %} + +{% if expunge_failing_stations -%} +# Disassociate stations based on excessive transmission failures or other +# indications of connection loss. This depends on the driver capabilities and +# may not be available with all drivers. +disassoc_low_ack=1 +{% endif %} + +{% if sec_wep -%} +# IEEE 802.11 specifies two authentication algorithms. hostapd can be +# configured to allow both of these or only one. Open system authentication +# should be used with IEEE 802.1X. +# Bit fields of allowed authentication algorithms: +# bit 0 = Open System Authentication +# bit 1 = Shared Key Authentication (requires WEP) +auth_algs=2 + +# WEP rekeying (disabled if key lengths are not set or are set to 0) +# Key lengths for default/broadcast and individual/unicast keys: +# 5 = 40-bit WEP (also known as 64-bit WEP with 40 secret bits) +# 13 = 104-bit WEP (also known as 128-bit WEP with 104 secret bits) +wep_key_len_broadcast=5 +wep_key_len_unicast=5 + +# Static WEP key configuration +# +# The key number to use when transmitting. +# It must be between 0 and 3, and the corresponding key must be set. +# default: not set +wep_default_key=0 + +# The WEP keys to use. +# A key may be a quoted string or unquoted hexadecimal digits. +# The key length should be 5, 13, or 16 characters, or 10, 26, or 32 +# digits, depending on whether 40-bit (64-bit), 104-bit (128-bit), or +# 128-bit (152-bit) WEP is used. +# Only the default key must be supplied; the others are optional. +{% if sec_wep_key -%} +{% for key in sec_wep_key -%} +wep_key{{ loop.index -1 }}={{ key}} +{% endfor %} +{%- endif %} + +{% elif sec_wpa -%} +##### WPA/IEEE 802.11i configuration ########################################## + +# Enable WPA. Setting this variable configures the AP to require WPA (either +# WPA-PSK or WPA-RADIUS/EAP based on other configuration). For WPA-PSK, either +# wpa_psk or wpa_passphrase must be set and wpa_key_mgmt must include WPA-PSK. +# Instead of wpa_psk / wpa_passphrase, wpa_psk_radius might suffice. +# For WPA-RADIUS/EAP, ieee8021x must be set (but without dynamic WEP keys), +# RADIUS authentication server must be configured, and WPA-EAP must be included +# in wpa_key_mgmt. +# This field is a bit field that can be used to enable WPA (IEEE 802.11i/D3.0) +# and/or WPA2 (full IEEE 802.11i/RSN): +# bit0 = WPA +# bit1 = IEEE 802.11i/RSN (WPA2) (dot11RSNAEnabled) +{% if 'both' in sec_wpa_mode -%} +wpa=3 +{%- elif 'wpa2' in sec_wpa_mode -%} +wpa=2 +{%- elif 'wpa' in sec_wpa_mode -%} +wpa=1 +{%- endif %} + +{% if sec_wpa_cipher -%} +# Set of accepted cipher suites (encryption algorithms) for pairwise keys +# (unicast packets). This is a space separated list of algorithms: +# CCMP = AES in Counter mode with CBC-MAC (CCMP-128) +# TKIP = Temporal Key Integrity Protocol +# CCMP-256 = AES in Counter mode with CBC-MAC with 256-bit key +# GCMP = Galois/counter mode protocol (GCMP-128) +# GCMP-256 = Galois/counter mode protocol with 256-bit key +# Group cipher suite (encryption algorithm for broadcast and multicast frames) +# is automatically selected based on this configuration. If only CCMP is +# allowed as the pairwise cipher, group cipher will also be CCMP. Otherwise, +# TKIP will be used as the group cipher. The optional group_cipher parameter can +# be used to override this automatic selection. +{% if 'wpa2' in sec_wpa_mode -%} +# Pairwise cipher for RSN/WPA2 (default: use wpa_pairwise value) +rsn_pairwise={{ sec_wpa_cipher | join(" ") }} +{% else -%} +# Pairwise cipher for WPA (v1) (default: TKIP) +wpa_pairwise={{ sec_wpa_cipher | join(" ") }} +{%- endif -%} +{% endif %} + +{% if sec_wpa_passphrase -%} +# IEEE 802.11 specifies two authentication algorithms. hostapd can be +# configured to allow both of these or only one. Open system authentication +# should be used with IEEE 802.1X. +# Bit fields of allowed authentication algorithms: +# bit 0 = Open System Authentication +# bit 1 = Shared Key Authentication (requires WEP) +auth_algs=1 + +# WPA pre-shared keys for WPA-PSK. This can be either entered as a 256-bit +# secret in hex format (64 hex digits), wpa_psk, or as an ASCII passphrase +# (8..63 characters) that will be converted to PSK. This conversion uses SSID +# so the PSK changes when ASCII passphrase is used and the SSID is changed. +wpa_passphrase={{ sec_wpa_passphrase }} + +# Set of accepted key management algorithms (WPA-PSK, WPA-EAP, or both). The +# entries are separated with a space. WPA-PSK-SHA256 and WPA-EAP-SHA256 can be +# added to enable SHA256-based stronger algorithms. +# WPA-PSK = WPA-Personal / WPA2-Personal +# WPA-PSK-SHA256 = WPA2-Personal using SHA256 +wpa_key_mgmt=WPA-PSK + +{% elif sec_wpa_radius -%} +##### IEEE 802.1X-2004 related configuration ################################## +# Require IEEE 802.1X authorization +ieee8021x=1 + +# Set of accepted key management algorithms (WPA-PSK, WPA-EAP, or both). The +# entries are separated with a space. WPA-PSK-SHA256 and WPA-EAP-SHA256 can be +# added to enable SHA256-based stronger algorithms. +# WPA-EAP = WPA-Enterprise / WPA2-Enterprise +# WPA-EAP-SHA256 = WPA2-Enterprise using SHA256 +wpa_key_mgmt=WPA-EAP + +{% if sec_wpa_radius_source -%} +# RADIUS client forced local IP address for the access point +# Normally the local IP address is determined automatically based on configured +# IP addresses, but this field can be used to force a specific address to be +# used, e.g., when the device has multiple IP addresses. +radius_client_addr={{ sec_wpa_radius_source }} + +# The own IP address of the access point (used as NAS-IP-Address) +own_ip_addr={{ sec_wpa_radius_source }} +{% else %} +# The own IP address of the access point (used as NAS-IP-Address) +own_ip_addr=127.0.0.1 +{% endif %} + +{% for radius in sec_wpa_radius -%} +{%- if not radius.disabled -%} +# RADIUS authentication server +auth_server_addr={{ radius.server }} +auth_server_port={{ radius.port }} +auth_server_shared_secret={{ radius.key }} +{% if radius.acc_port -%} +# RADIUS accounting server +acct_server_addr={{ radius.server }} +acct_server_port={{ radius.acc_port }} +acct_server_shared_secret={{ radius.key }} +{% endif %} +{% endif %} +{% endfor %} + +{% endif %} + +{% else %} +# Open system +auth_algs=1 +{% endif %} + +# TX queue parameters (EDCF / bursting) +# tx_queue_<queue name>_<param> +# queues: data0, data1, data2, data3 +# (data0 is the highest priority queue) +# parameters: +# aifs: AIFS (default 2) +# cwmin: cwMin (1, 3, 7, 15, 31, 63, 127, 255, 511, 1023, 2047, 4095, 8191, +# 16383, 32767) +# cwmax: cwMax (same values as cwMin, cwMax >= cwMin) +# burst: maximum length (in milliseconds with precision of up to 0.1 ms) for +# bursting +# +# Default WMM parameters (IEEE 802.11 draft; 11-03-0504-03-000e): +# These parameters are used by the access point when transmitting frames +# to the clients. +# +# Low priority / AC_BK = background +tx_queue_data3_aifs=7 +tx_queue_data3_cwmin=15 +tx_queue_data3_cwmax=1023 +tx_queue_data3_burst=0 +# Note: for IEEE 802.11b mode: cWmin=31 cWmax=1023 burst=0 +# +# Normal priority / AC_BE = best effort +tx_queue_data2_aifs=3 +tx_queue_data2_cwmin=15 +tx_queue_data2_cwmax=63 +tx_queue_data2_burst=0 +# Note: for IEEE 802.11b mode: cWmin=31 cWmax=127 burst=0 +# +# High priority / AC_VI = video +tx_queue_data1_aifs=1 +tx_queue_data1_cwmin=7 +tx_queue_data1_cwmax=15 +tx_queue_data1_burst=3.0 +# Note: for IEEE 802.11b mode: cWmin=15 cWmax=31 burst=6.0 +# +# Highest priority / AC_VO = voice +tx_queue_data0_aifs=1 +tx_queue_data0_cwmin=3 +tx_queue_data0_cwmax=7 +tx_queue_data0_burst=1.5 + +# Default WMM parameters (IEEE 802.11 draft; 11-03-0504-03-000e): +# for 802.11a or 802.11g networks +# These parameters are sent to WMM clients when they associate. +# The parameters will be used by WMM clients for frames transmitted to the +# access point. +# +# note - txop_limit is in units of 32microseconds +# note - acm is admission control mandatory flag. 0 = admission control not +# required, 1 = mandatory +# note - Here cwMin and cmMax are in exponent form. The actual cw value used +# will be (2^n)-1 where n is the value given here. The allowed range for these +# wmm_ac_??_{cwmin,cwmax} is 0..15 with cwmax >= cwmin. +# +wmm_enabled=1 + +# Low priority / AC_BK = background +wmm_ac_bk_cwmin=4 +wmm_ac_bk_cwmax=10 +wmm_ac_bk_aifs=7 +wmm_ac_bk_txop_limit=0 +wmm_ac_bk_acm=0 +# Note: for IEEE 802.11b mode: cWmin=5 cWmax=10 +# +# Normal priority / AC_BE = best effort +wmm_ac_be_aifs=3 +wmm_ac_be_cwmin=4 +wmm_ac_be_cwmax=10 +wmm_ac_be_txop_limit=0 +wmm_ac_be_acm=0 +# Note: for IEEE 802.11b mode: cWmin=5 cWmax=7 +# +# High priority / AC_VI = video +wmm_ac_vi_aifs=2 +wmm_ac_vi_cwmin=3 +wmm_ac_vi_cwmax=4 +wmm_ac_vi_txop_limit=94 +wmm_ac_vi_acm=0 +# Note: for IEEE 802.11b mode: cWmin=4 cWmax=5 txop_limit=188 +# +# Highest priority / AC_VO = voice +wmm_ac_vo_aifs=2 +wmm_ac_vo_cwmin=2 +wmm_ac_vo_cwmax=3 +wmm_ac_vo_txop_limit=47 +wmm_ac_vo_acm=0 + diff --git a/data/templates/wifi/wpa_supplicant.conf.tmpl b/data/templates/wifi/wpa_supplicant.conf.tmpl index 4a14cd309..2784883f1 100644 --- a/data/templates/wifi/wpa_supplicant.conf.tmpl +++ b/data/templates/wifi/wpa_supplicant.conf.tmpl @@ -1,9 +1,9 @@ -# WPA supplicant config
-network={
- ssid="{{ ssid }}"
-{%- if sec_wpa_passphrase %}
- psk="{{ sec_wpa_passphrase }}"
-{% else %}
- key_mgmt=NONE
-{% endif %}
-}
+# WPA supplicant config +network={ + ssid="{{ ssid }}" +{%- if sec_wpa_passphrase %} + psk="{{ sec_wpa_passphrase }}" +{% else %} + key_mgmt=NONE +{% endif %} +} diff --git a/data/templates/wwan/chat.tmpl b/data/templates/wwan/chat.tmpl index 78453bc5b..a3395c057 100644 --- a/data/templates/wwan/chat.tmpl +++ b/data/templates/wwan/chat.tmpl @@ -1,6 +1,6 @@ -ABORT 'NO DIAL TONE' ABORT 'NO ANSWER' ABORT 'NO CARRIER' ABORT DELAYED
-'' AT
-OK ATZ
-OK 'AT+CGDCONT=1,"IP","{{ apn }}"'
-OK ATD*99#
-CONNECT ''
+ABORT 'NO DIAL TONE' ABORT 'NO ANSWER' ABORT 'NO CARRIER' ABORT DELAYED +'' AT +OK ATZ +OK 'AT+CGDCONT=1,"IP","{{ apn }}"' +OK ATD*99# +CONNECT '' diff --git a/data/templates/wwan/ip-pre-up.script.tmpl b/data/templates/wwan/ip-pre-up.script.tmpl index f20c75ea3..7a17a1c71 100644 --- a/data/templates/wwan/ip-pre-up.script.tmpl +++ b/data/templates/wwan/ip-pre-up.script.tmpl @@ -1,23 +1,23 @@ -#!/bin/sh
-# As WWAN is an "on demand" interface we need to re-configure it when it
-# becomes 'up'
-
-ipparam=$6
-
-# device name and metric are received using ipparam
-device=`echo "$ipparam"|awk '{ print $1 }'`
-
-if [ "$device" != "{{ intf }}" ]; then
- exit
-fi
-
-# add some info to syslog
-DIALER_PID=$(cat /var/run/{{ intf }}.pid)
-logger -t pppd[$DIALER_PID] "executing $0"
-
-echo "{{ description }}" > /sys/class/net/{{ intf }}/ifalias
-
-{% if vrf -%}
-logger -t pppd[$DIALER_PID] "configuring interface {{ intf }} for VRF {{ vrf }}"
-ip link set dev {{ intf }} master {{ vrf }}
-{% endif %}
+#!/bin/sh +# As WWAN is an "on demand" interface we need to re-configure it when it +# becomes 'up' + +ipparam=$6 + +# device name and metric are received using ipparam +device=`echo "$ipparam"|awk '{ print $1 }'` + +if [ "$device" != "{{ intf }}" ]; then + exit +fi + +# add some info to syslog +DIALER_PID=$(cat /var/run/{{ intf }}.pid) +logger -t pppd[$DIALER_PID] "executing $0" + +echo "{{ description }}" > /sys/class/net/{{ intf }}/ifalias + +{% if vrf -%} +logger -t pppd[$DIALER_PID] "configuring interface {{ intf }} for VRF {{ vrf }}" +ip link set dev {{ intf }} master {{ vrf }} +{% endif %} diff --git a/src/conf_mode/interfaces-wirelessmodem.py b/src/conf_mode/interfaces-wirelessmodem.py index 9b6de2d12..da33d54e4 100755 --- a/src/conf_mode/interfaces-wirelessmodem.py +++ b/src/conf_mode/interfaces-wirelessmodem.py @@ -133,7 +133,7 @@ def verify(wwan): def generate(wwan): # Prepare Jinja2 template loader from files - tmpl_path = os.path.join(vyos_data_dir["data"], "templates", "wwan") + tmpl_path = os.path.join(vyos_data_dir['data'], 'templates', 'wwan') fs_loader = FileSystemLoader(tmpl_path) env = Environment(loader=fs_loader) |