diff options
| -rw-r--r-- | data/configd-include.json | 1 | ||||
| -rw-r--r-- | data/templates/frr/bfd.frr.tmpl | 37 | ||||
| -rw-r--r-- | interface-definitions/protocols-bfd.xml.in | 6 | ||||
| -rwxr-xr-x | src/conf_mode/protocols_bfd.py | 207 |
4 files changed, 82 insertions, 169 deletions
diff --git a/data/configd-include.json b/data/configd-include.json index e50dbf1b2..aabd7232e 100644 --- a/data/configd-include.json +++ b/data/configd-include.json @@ -32,6 +32,7 @@ "nat66.py", "ntp.py", "policy-local-route.py", +"protocols_bfd.py", "protocols_bgp.py", "protocols_igmp.py", "protocols_isis.py", diff --git a/data/templates/frr/bfd.frr.tmpl b/data/templates/frr/bfd.frr.tmpl index 9e5ad3379..921d9b0bc 100644 --- a/data/templates/frr/bfd.frr.tmpl +++ b/data/templates/frr/bfd.frr.tmpl @@ -1,22 +1,23 @@ ! bfd -{% for peer in old_peers %} - no peer {{ peer.remote }}{% if peer.multihop %} multihop{% endif %}{% if peer.src_addr %} local-address {{ peer.src_addr }}{% endif %}{% if peer.src_if %} interface {{ peer.src_if }}{% endif %} - -{% endfor %} -! -{% for peer in new_peers %} - peer {{ peer.remote }}{% if peer.multihop %} multihop{% endif %}{% if peer.src_addr %} local-address {{ peer.src_addr }}{% endif %}{% if peer.src_if %} interface {{ peer.src_if }}{% endif %} - - detect-multiplier {{ peer.multiplier }} - receive-interval {{ peer.rx_interval }} - transmit-interval {{ peer.tx_interval }} -{% if peer.echo_mode %} - echo-mode -{% endif %} -{% if peer.echo_interval != '' %} - echo-interval {{ peer.echo_interval }} +{% if peer is defined and peer is not none %} +{% for peer_name, peer_config in peer.items() %} + peer {{ peer_name }}{{ ' multihop' if peer_config.multihop is defined }}{{ ' local-address ' + peer_config.source.address if peer_config.source is defined and peer_config.source.address is defined }}{{ ' interface ' + peer_config.source.interface if peer_config.source is defined and peer_config.source.interface is defined }} + detect-multiplier {{ peer_config.interval.multiplier }} + receive-interval {{ peer_config.interval.receive }} + transmit-interval {{ peer_config.interval.transmit }} +{% if peer_config.interval.echo_interval is defined and peer_config.interval.echo_interval is not none %} + echo-interval {{ peer_config.interval.echo_interval }} +{% endif %} +{% if peer_config.echo_mode is defined %} + echo-mode +{% endif %} +{% if peer_config.shutdown is defined %} + shutdown +{% else %} + no shutdown +{% endif %} + ! +{% endfor %} {% endif %} - {% if not peer.shutdown %}no {% endif %}shutdown -{% endfor %} ! diff --git a/interface-definitions/protocols-bfd.xml.in b/interface-definitions/protocols-bfd.xml.in index 8900e7955..6f82a5c2b 100644 --- a/interface-definitions/protocols-bfd.xml.in +++ b/interface-definitions/protocols-bfd.xml.in @@ -42,6 +42,9 @@ <leafNode name="address"> <properties> <help>Local address to bind our peer listener to</help> + <completionHelp> + <script>${vyos_completion_dir}/list_local_ips.sh --both</script> + </completionHelp> <valueHelp> <format>ipv4</format> <description>Local IPv4 address used to connect to the peer</description> @@ -74,6 +77,7 @@ <validator name="numeric" argument="--range 10-60000"/> </constraint> </properties> + <defaultValue>300</defaultValue> </leafNode> <leafNode name="transmit"> <properties> @@ -86,6 +90,7 @@ <validator name="numeric" argument="--range 10-60000"/> </constraint> </properties> + <defaultValue>300</defaultValue> </leafNode> <leafNode name="multiplier"> <properties> @@ -98,6 +103,7 @@ <validator name="numeric" argument="--range 2-255"/> </constraint> </properties> + <defaultValue>3</defaultValue> </leafNode> <leafNode name="echo-interval"> <properties> diff --git a/src/conf_mode/protocols_bfd.py b/src/conf_mode/protocols_bfd.py index d1e551cad..7737c6aa1 100755 --- a/src/conf_mode/protocols_bfd.py +++ b/src/conf_mode/protocols_bfd.py @@ -1,6 +1,6 @@ #!/usr/bin/env python3 # -# Copyright (C) 2019-2020 VyOS maintainers and contributors +# Copyright (C) 2019-2021 VyOS maintainers and contributors # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License version 2 or later as @@ -17,191 +17,96 @@ import os from sys import exit -from copy import deepcopy from vyos.config import Config +from vyos.configdict import dict_merge from vyos.template import is_ipv6 -from vyos.template import render +from vyos.template import render_to_string from vyos.util import call from vyos.validate import is_ipv6_link_local +from vyos.xml import defaults from vyos import ConfigError +from vyos import frr from vyos import airbag airbag.enable() -config_file = r'/tmp/bfd.frr' - -default_config_data = { - 'new_peers': [], - 'old_peers' : [] -} - -# get configuration for BFD peer from proposed or effective configuration -def get_bfd_peer_config(peer, conf_mode="proposed"): - conf = Config() - conf.set_level('protocols bfd peer {0}'.format(peer)) - - bfd_peer = { - 'remote': peer, - 'shutdown': False, - 'src_if': '', - 'src_addr': '', - 'multiplier': '3', - 'rx_interval': '300', - 'tx_interval': '300', - 'multihop': False, - 'echo_interval': '', - 'echo_mode': False, - } - - # Check if individual peer is disabled - if conf_mode == "effective" and conf.exists_effective('shutdown'): - bfd_peer['shutdown'] = True - if conf_mode == "proposed" and conf.exists('shutdown'): - bfd_peer['shutdown'] = True - - # Check if peer has a local source interface configured - if conf_mode == "effective" and conf.exists_effective('source interface'): - bfd_peer['src_if'] = conf.return_effective_value('source interface') - if conf_mode == "proposed" and conf.exists('source interface'): - bfd_peer['src_if'] = conf.return_value('source interface') - - # Check if peer has a local source address configured - this is mandatory for IPv6 - if conf_mode == "effective" and conf.exists_effective('source address'): - bfd_peer['src_addr'] = conf.return_effective_value('source address') - if conf_mode == "proposed" and conf.exists('source address'): - bfd_peer['src_addr'] = conf.return_value('source address') - - # Tell BFD daemon that we should expect packets with TTL less than 254 - # (because it will take more than one hop) and to listen on the multihop - # port (4784) - if conf_mode == "effective" and conf.exists_effective('multihop'): - bfd_peer['multihop'] = True - if conf_mode == "proposed" and conf.exists('multihop'): - bfd_peer['multihop'] = True - - # Configures the minimum interval that this system is capable of receiving - # control packets. The default value is 300 milliseconds. - if conf_mode == "effective" and conf.exists_effective('interval receive'): - bfd_peer['rx_interval'] = conf.return_effective_value('interval receive') - if conf_mode == "proposed" and conf.exists('interval receive'): - bfd_peer['rx_interval'] = conf.return_value('interval receive') - - # The minimum transmission interval (less jitter) that this system wants - # to use to send BFD control packets. - if conf_mode == "effective" and conf.exists_effective('interval transmit'): - bfd_peer['tx_interval'] = conf.return_effective_value('interval transmit') - if conf_mode == "proposed" and conf.exists('interval transmit'): - bfd_peer['tx_interval'] = conf.return_value('interval transmit') - - # Configures the detection multiplier to determine packet loss. The remote - # transmission interval will be multiplied by this value to determine the - # connection loss detection timer. The default value is 3. - if conf_mode == "effective" and conf.exists_effective('interval multiplier'): - bfd_peer['multiplier'] = conf.return_effective_value('interval multiplier') - if conf_mode == "proposed" and conf.exists('interval multiplier'): - bfd_peer['multiplier'] = conf.return_value('interval multiplier') - - # Configures the minimal echo receive transmission interval that this system is capable of handling - if conf_mode == "effective" and conf.exists_effective('interval echo-interval'): - bfd_peer['echo_interval'] = conf.return_effective_value('interval echo-interval') - if conf_mode == "proposed" and conf.exists('interval echo-interval'): - bfd_peer['echo_interval'] = conf.return_value('interval echo-interval') - - # Enables or disables the echo transmission mode - if conf_mode == "effective" and conf.exists_effective('echo-mode'): - bfd_peer['echo_mode'] = True - if conf_mode == "proposed" and conf.exists('echo-mode'): - bfd_peer['echo_mode'] = True - - return bfd_peer - -def get_config(): - bfd = deepcopy(default_config_data) - conf = Config() - if not (conf.exists('protocols bfd') or conf.exists_effective('protocols bfd')): - return None +def get_config(config=None): + if config: + conf = config else: - conf.set_level('protocols bfd') - - # as we have to use vtysh to talk to FRR we also need to know - # which peers are gone due to a config removal - thus we read in - # all peers (active or to delete) - for peer in conf.list_effective_nodes('peer'): - bfd['old_peers'].append(get_bfd_peer_config(peer, "effective")) - - for peer in conf.list_nodes('peer'): - bfd['new_peers'].append(get_bfd_peer_config(peer)) - - # find deleted peers - set_new_peers = set(conf.list_nodes('peer')) - set_old_peers = set(conf.list_effective_nodes('peer')) - bfd['deleted_peers'] = set_old_peers - set_new_peers + conf = Config() + base = ['protocols', 'bfd'] + bfd = conf.get_config_dict(base, key_mangling=('-', '_'), get_first_key=True) + + # Bail out early if configuration tree does not exist + if not conf.exists(base): + return bfd + + if 'peer' in bfd: + # We have gathered the dict representation of the CLI, but there are + # default options which we need to update into the dictionary retrived. + # XXX: T2665: we currently have no nice way for defaults under tag + # nodes, thus we load the defaults "by hand" + default_values = defaults(base + ['peer']) + for peer in bfd['peer']: + bfd['peer'][peer] = dict_merge(default_values, bfd['peer'][peer]) return bfd def verify(bfd): - if bfd is None: + if not bfd or 'peer' not in bfd: return None - # some variables to use later - conf = Config() - - for peer in bfd['new_peers']: + for peer, peer_config in bfd['peer'].items(): # IPv6 link local peers require an explicit local address/interface - if is_ipv6_link_local(peer['remote']): - if not (peer['src_if'] and peer['src_addr']): + if is_ipv6_link_local(peer): + if 'source' not in peer_config or len(peer_config['source'] < 2): raise ConfigError('BFD IPv6 link-local peers require explicit local address and interface setting') # IPv6 peers require an explicit local address - if is_ipv6(peer['remote']): - if not peer['src_addr']: + if is_ipv6(peer): + if 'source' not in peer_config or 'address' not in peer_config['source']: raise ConfigError('BFD IPv6 peers require explicit local address setting') - # multihop require source address - if peer['multihop'] and not peer['src_addr']: - raise ConfigError('Multihop require source address') + if 'multihop' in peer_config: + # multihop require source address + if 'source' not in peer_config or 'address' not in peer_config['source']: + raise ConfigError('BFD multihop require source address') - # multihop and echo-mode cannot be used together - if peer['multihop'] and peer['echo_mode']: - raise ConfigError('Multihop and echo-mode cannot be used together') + # multihop and echo-mode cannot be used together + if 'echo_mode' in peer_config: + raise ConfigError('Multihop and echo-mode cannot be used together') - # multihop doesn't accept interface names - if peer['multihop'] and peer['src_if']: - raise ConfigError('Multihop and source interface cannot be used together') + # multihop doesn't accept interface names + if 'source' in peer_config and 'interface' in peer_config['source']: + raise ConfigError('Multihop and source interface cannot be used together') # echo interval can be configured only with enabled echo-mode - if peer['echo_interval'] != '' and not peer['echo_mode']: + if 'interval' in peer_config and 'echo_interval' in peer_config['interval'] and 'echo_mode' not in peer_config: raise ConfigError('echo-interval can be configured only with enabled echo-mode') - # check if we deleted peers are not used in configuration - if conf.exists('protocols bgp'): - bgp_as = conf.list_nodes('protocols bgp')[0] - - # check BGP neighbors - for peer in bfd['deleted_peers']: - if conf.exists('protocols bgp {0} neighbor {1} bfd'.format(bgp_as, peer)): - raise ConfigError('Cannot delete BFD peer {0}: it is used in BGP configuration'.format(peer)) - if conf.exists('protocols bgp {0} neighbor {1} peer-group'.format(bgp_as, peer)): - peer_group = conf.return_value('protocols bgp {0} neighbor {1} peer-group'.format(bgp_as, peer)) - if conf.exists('protocols bgp {0} peer-group {1} bfd'.format(bgp_as, peer_group)): - raise ConfigError('Cannot delete BFD peer {0}: it belongs to BGP peer-group {1} with enabled BFD'.format(peer, peer_group)) - return None def generate(bfd): - if bfd is None: + if not bfd: + bfd['new_frr_config'] = '' return None - render(config_file, 'frr/bfd.frr.tmpl', bfd) - return None + bfd['new_frr_config'] = render_to_string('frr/bfd.frr.tmpl', bfd) def apply(bfd): - if bfd is None: - return None - - call("vtysh -d bfdd -f " + config_file) - if os.path.exists(config_file): - os.remove(config_file) + # Save original configuration prior to starting any commit actions + frr_cfg = frr.FRRConfig() + frr_cfg.load_configuration() + frr_cfg.modify_section('bfd', '') + frr_cfg.add_before(r'(ip prefix-list .*|route-map .*|line vty)', bfd['new_frr_config']) + frr_cfg.commit_configuration() + + # If FRR config is blank, rerun the blank commit x times due to frr-reload + # behavior/bug not properly clearing out on one commit. + if bfd['new_frr_config'] == '': + for a in range(5): + frr_cfg.commit_configuration() return None |