diff options
42 files changed, 847 insertions, 225 deletions
diff --git a/data/configd-include.json b/data/configd-include.json index 456211caa..1c843e9fa 100644 --- a/data/configd-include.json +++ b/data/configd-include.json @@ -86,5 +86,4 @@ "vpn_pptp.py", "vpn_sstp.py", "vrf.py", -"vrf_vni.py" ] diff --git a/data/templates/frr/vrf-vni.frr.j2 b/data/templates/frr/vrf-vni.frr.j2 deleted file mode 100644 index e5f4810a1..000000000 --- a/data/templates/frr/vrf-vni.frr.j2 +++ /dev/null @@ -1,9 +0,0 @@ -{% if name is vyos_defined %} -{% for vrf, vrf_config in name.items() %} -vrf {{ vrf }} -{% if vrf_config.vni is vyos_defined %} - vni {{ vrf_config.vni }} -{% endif %} - exit-vrf -{% endfor %} -{% endif %} diff --git a/data/templates/frr/vrf.route-map.frr.j2 b/data/templates/frr/vrf.route-map.frr.j2 deleted file mode 100644 index 5e0c56a7b..000000000 --- a/data/templates/frr/vrf.route-map.frr.j2 +++ /dev/null @@ -1,10 +0,0 @@ -! -{% if vrf is vyos_defined and route_map is vyos_defined %} -vrf {{ vrf }} - ip protocol {{ protocol }} route-map {{ route_map }} - exit-vrf -! -{% elif route_map is vyos_defined %} -ip protocol {{ protocol }} route-map {{ route_map }} -{% endif %} -! diff --git a/data/templates/frr/vrf.route-map.v6.frr.j2 b/data/templates/frr/vrf.route-map.v6.frr.j2 deleted file mode 100644 index 7dc59a046..000000000 --- a/data/templates/frr/vrf.route-map.v6.frr.j2 +++ /dev/null @@ -1,10 +0,0 @@ -! -{% if vrf is vyos_defined and route_map is vyos_defined %} -vrf {{ vrf }} - ipv6 protocol {{ protocol }} route-map {{ route_map }} - exit-vrf -! -{% elif route_map is vyos_defined %} -ipv6 protocol {{ protocol }} route-map {{ route_map }} -{% endif %} -! diff --git a/data/templates/frr/zebra.route-map.frr.j2 b/data/templates/frr/zebra.route-map.frr.j2 new file mode 100644 index 000000000..8e18abbde --- /dev/null +++ b/data/templates/frr/zebra.route-map.frr.j2 @@ -0,0 +1,9 @@ +! +{% if protocol is vyos_defined %} +{% for protocol_name, protocol_config in protocol.items() %} +{% if protocol_name is vyos_defined('ospfv3') %} +{% set protocol_name = 'ospf6' %} +{% endif %} +{{ afi }} protocol {{ protocol_name }} route-map {{ protocol_config.route_map }} +{% endfor %} +{% endif %} diff --git a/data/templates/frr/zebra.vrf.route-map.frr.j2 b/data/templates/frr/zebra.vrf.route-map.frr.j2 new file mode 100644 index 000000000..eb6abd8e7 --- /dev/null +++ b/data/templates/frr/zebra.vrf.route-map.frr.j2 @@ -0,0 +1,24 @@ +! +{% if name is vyos_defined %} +{% for vrf, vrf_config in name.items() %} +vrf {{ vrf }} +{% if vrf_config.ip.protocol is vyos_defined %} +{% for protocol_name, protocol_config in vrf_config.ip.protocol.items() %} + ip protocol {{ protocol_name }} route-map {{ protocol_config.route_map }} +{% endfor %} +{% endif %} +{% if vrf_config.ipv6.protocol is vyos_defined %} +{% for protocol_name, protocol_config in vrf_config.ipv6.protocol.items() %} +{% if protocol_name is vyos_defined('ospfv3') %} +{% set protocol_name = 'ospf6' %} +{% endif %} + ipv6 protocol {{ protocol_name }} route-map {{ protocol_config.route_map }} +{% endfor %} +{% endif %} +{% if vrf_config.vni is vyos_defined %} + vni {{ vrf_config.vni }} +{% endif %} +{% endfor %} + exit-vrf +! +{% endif %} diff --git a/interface-definitions/include/bgp/protocol-common-config.xml.i b/interface-definitions/include/bgp/protocol-common-config.xml.i index a9122db57..527eaf991 100644 --- a/interface-definitions/include/bgp/protocol-common-config.xml.i +++ b/interface-definitions/include/bgp/protocol-common-config.xml.i @@ -1565,7 +1565,6 @@ #include <include/port-number.xml.i> </children> </tagNode> -#include <include/route-map.xml.i> <node name="timers"> <properties> <help>BGP protocol timers</help> diff --git a/interface-definitions/include/eigrp/protocol-common-config.xml.i b/interface-definitions/include/eigrp/protocol-common-config.xml.i index 88365187a..a21d18424 100644 --- a/interface-definitions/include/eigrp/protocol-common-config.xml.i +++ b/interface-definitions/include/eigrp/protocol-common-config.xml.i @@ -107,7 +107,6 @@ <multi/> </properties> </leafNode> -#include <include/route-map.xml.i> #include <include/router-id.xml.i> <!-- FRR timers not implemented yet --> <leafNode name="variance"> diff --git a/interface-definitions/include/isis/protocol-common-config.xml.i b/interface-definitions/include/isis/protocol-common-config.xml.i index 8103b5c5d..4ca7061db 100644 --- a/interface-definitions/include/isis/protocol-common-config.xml.i +++ b/interface-definitions/include/isis/protocol-common-config.xml.i @@ -687,5 +687,4 @@ </leafNode> </children> </tagNode> -#include <include/route-map.xml.i> <!-- include end --> diff --git a/interface-definitions/include/ospf/protocol-common-config.xml.i b/interface-definitions/include/ospf/protocol-common-config.xml.i index e400119dd..b7f22cb88 100644 --- a/interface-definitions/include/ospf/protocol-common-config.xml.i +++ b/interface-definitions/include/ospf/protocol-common-config.xml.i @@ -816,7 +816,6 @@ </leafNode> </children> </node> -#include <include/route-map.xml.i> <node name="timers"> <properties> <help>Adjust routing timers</help> diff --git a/interface-definitions/include/ospfv3/protocol-common-config.xml.i b/interface-definitions/include/ospfv3/protocol-common-config.xml.i index 1c33ca920..a7de50638 100644 --- a/interface-definitions/include/ospfv3/protocol-common-config.xml.i +++ b/interface-definitions/include/ospfv3/protocol-common-config.xml.i @@ -256,5 +256,4 @@ </node> </children> </node> -#include <include/route-map.xml.i> <!-- include end --> diff --git a/interface-definitions/include/system-ip-protocol.xml.i b/interface-definitions/include/system-ip-protocol.xml.i new file mode 100644 index 000000000..c630eb3f7 --- /dev/null +++ b/interface-definitions/include/system-ip-protocol.xml.i @@ -0,0 +1,56 @@ +<!-- include start from system-ip-protocol.xml.i --> +<tagNode name="protocol"> + <properties> + <help>Filter routing info exchanged between routing protocol and zebra</help> + <completionHelp> + <list>any babel bgp connected eigrp isis kernel ospf rip static table</list> + </completionHelp> + <valueHelp> + <format>any</format> + <description>Any of the above protocols</description> + </valueHelp> + <valueHelp> + <format>babel</format> + <description>Babel routing protocol</description> + </valueHelp> + <valueHelp> + <format>bgp</format> + <description>Border Gateway Protocol</description> + </valueHelp> + <valueHelp> + <format>connected</format> + <description>Connected routes (directly attached subnet or host)</description> + </valueHelp> + <valueHelp> + <format>eigrp</format> + <description>Enhanced Interior Gateway Routing Protocol</description> + </valueHelp> + <valueHelp> + <format>isis</format> + <description>Intermediate System to Intermediate System</description> + </valueHelp> + <valueHelp> + <format>kernel</format> + <description>Kernel routes (not installed via the zebra RIB)</description> + </valueHelp> + <valueHelp> + <format>ospf</format> + <description>Open Shortest Path First (OSPFv2)</description> + </valueHelp> + <valueHelp> + <format>rip</format> + <description>Routing Information Protocol</description> + </valueHelp> + <valueHelp> + <format>static</format> + <description>Statically configured routes</description> + </valueHelp> + <constraint> + <regex>(any|babel|bgp|connected|eigrp|isis|kernel|ospf|rip|static|table)</regex> + </constraint> + </properties> + <children> + #include <include/route-map.xml.i> + </children> +</tagNode> +<!-- include end -->
\ No newline at end of file diff --git a/interface-definitions/include/system-ipv6-protocol.xml.i b/interface-definitions/include/system-ipv6-protocol.xml.i new file mode 100644 index 000000000..485776a71 --- /dev/null +++ b/interface-definitions/include/system-ipv6-protocol.xml.i @@ -0,0 +1,52 @@ +<!-- include start from system-ipv6-protocol.xml.i --> +<tagNode name="protocol"> + <properties> + <help>Filter routing info exchanged between routing protocol and zebra</help> + <completionHelp> + <list>any babel bgp connected isis kernel ospfv3 ripng static table</list> + </completionHelp> + <valueHelp> + <format>any</format> + <description>Any of the above protocols</description> + </valueHelp> + <valueHelp> + <format>babel</format> + <description>Babel routing protocol</description> + </valueHelp> + <valueHelp> + <format>bgp</format> + <description>Border Gateway Protocol</description> + </valueHelp> + <valueHelp> + <format>connected</format> + <description>Connected routes (directly attached subnet or host)</description> + </valueHelp> + <valueHelp> + <format>isis</format> + <description>Intermediate System to Intermediate System</description> + </valueHelp> + <valueHelp> + <format>kernel</format> + <description>Kernel routes (not installed via the zebra RIB)</description> + </valueHelp> + <valueHelp> + <format>ospfv3</format> + <description>Open Shortest Path First (OSPFv3)</description> + </valueHelp> + <valueHelp> + <format>ripng</format> + <description>Routing Information Protocol next-generation</description> + </valueHelp> + <valueHelp> + <format>static</format> + <description>Statically configured routes</description> + </valueHelp> + <constraint> + <regex>(any|babel|bgp|connected|isis|kernel|ospfv3|ripng|static|table)</regex> + </constraint> + </properties> + <children> + #include <include/route-map.xml.i> + </children> +</tagNode> +<!-- include end --> diff --git a/interface-definitions/include/version/bgp-version.xml.i b/interface-definitions/include/version/bgp-version.xml.i index ced49e729..1386ea9bc 100644 --- a/interface-definitions/include/version/bgp-version.xml.i +++ b/interface-definitions/include/version/bgp-version.xml.i @@ -1,3 +1,3 @@ <!-- include start from include/version/bgp-version.xml.i --> -<syntaxVersion component='bgp' version='3'></syntaxVersion> +<syntaxVersion component='bgp' version='4'></syntaxVersion> <!-- include end --> diff --git a/interface-definitions/include/version/isis-version.xml.i b/interface-definitions/include/version/isis-version.xml.i index 7bf12e81a..f50329b09 100644 --- a/interface-definitions/include/version/isis-version.xml.i +++ b/interface-definitions/include/version/isis-version.xml.i @@ -1,3 +1,3 @@ <!-- include start from include/version/isis-version.xml.i --> -<syntaxVersion component='isis' version='2'></syntaxVersion> +<syntaxVersion component='isis' version='3'></syntaxVersion> <!-- include end --> diff --git a/interface-definitions/include/version/ospf-version.xml.i b/interface-definitions/include/version/ospf-version.xml.i index 755965daa..df108837b 100644 --- a/interface-definitions/include/version/ospf-version.xml.i +++ b/interface-definitions/include/version/ospf-version.xml.i @@ -1,3 +1,3 @@ <!-- include start from include/version/ospf-version.xml.i --> -<syntaxVersion component='ospf' version='1'></syntaxVersion> +<syntaxVersion component='ospf' version='2'></syntaxVersion> <!-- include end --> diff --git a/interface-definitions/include/version/quagga-version.xml.i b/interface-definitions/include/version/quagga-version.xml.i index f9944acce..23d884cd4 100644 --- a/interface-definitions/include/version/quagga-version.xml.i +++ b/interface-definitions/include/version/quagga-version.xml.i @@ -1,3 +1,3 @@ <!-- include start from include/version/quagga-version.xml.i --> -<syntaxVersion component='quagga' version='10'></syntaxVersion> +<syntaxVersion component='quagga' version='11'></syntaxVersion> <!-- include end --> diff --git a/interface-definitions/include/version/rip-version.xml.i b/interface-definitions/include/version/rip-version.xml.i new file mode 100644 index 000000000..30ace486a --- /dev/null +++ b/interface-definitions/include/version/rip-version.xml.i @@ -0,0 +1,3 @@ +<!-- include start from include/version/rip-version.xml.i --> +<syntaxVersion component='rip' version='1'></syntaxVersion> +<!-- include end --> diff --git a/interface-definitions/system-ip.xml.in b/interface-definitions/system-ip.xml.in index e00dbf252..abdede979 100644 --- a/interface-definitions/system-ip.xml.in +++ b/interface-definitions/system-ip.xml.in @@ -48,6 +48,7 @@ </leafNode> </children> </node> + #include <include/system-ip-protocol.xml.i> </children> </node> </children> diff --git a/interface-definitions/system-ipv6.xml.in b/interface-definitions/system-ipv6.xml.in index 63260d00c..e17e1c01c 100644 --- a/interface-definitions/system-ipv6.xml.in +++ b/interface-definitions/system-ipv6.xml.in @@ -36,6 +36,7 @@ #include <include/arp-ndp-table-size.xml.i> </children> </node> + #include <include/system-ipv6-protocol.xml.i> <leafNode name="strict-dad"> <properties> <help>Disable IPv6 operation on interface when DAD fails on LL addr</help> diff --git a/interface-definitions/vrf.xml.in b/interface-definitions/vrf.xml.in index 96c6d8be2..a7efe146a 100644 --- a/interface-definitions/vrf.xml.in +++ b/interface-definitions/vrf.xml.in @@ -34,6 +34,7 @@ </properties> <children> #include <include/interface/disable-forwarding.xml.i> + #include <include/system-ip-protocol.xml.i> </children> </node> <node name="ipv6"> @@ -42,6 +43,7 @@ </properties> <children> #include <include/interface/disable-forwarding.xml.i> + #include <include/system-ipv6-protocol.xml.i> </children> </node> <node name="protocols"> @@ -119,20 +121,7 @@ <constraintErrorMessage>VRF routing table must be in range from 100 to 65535</constraintErrorMessage> </properties> </leafNode> - <leafNode name="vni" owner="${vyos_conf_scripts_dir}/vrf_vni.py"> - <properties> - <help>Virtual Network Identifier</help> - <!-- priority must be after BGP --> - <priority>822</priority> - <valueHelp> - <format>u32:0-16777214</format> - <description>VXLAN virtual network identifier</description> - </valueHelp> - <constraint> - <validator name="numeric" argument="--range 0-16777214"/> - </constraint> - </properties> - </leafNode> + #include <include/vni.xml.i> </children> </tagNode> </children> diff --git a/interface-definitions/xml-component-version.xml.in b/interface-definitions/xml-component-version.xml.in index 2e6506efc..e05f64643 100644 --- a/interface-definitions/xml-component-version.xml.in +++ b/interface-definitions/xml-component-version.xml.in @@ -33,6 +33,7 @@ #include <include/version/pptp-version.xml.i> #include <include/version/qos-version.xml.i> #include <include/version/quagga-version.xml.i> + #include <include/version/rip-version.xml.i> #include <include/version/rpki-version.xml.i> #include <include/version/salt-version.xml.i> #include <include/version/snmp-version.xml.i> diff --git a/smoketest/configs/egb-igp-route-maps b/smoketest/configs/egb-igp-route-maps new file mode 100644 index 000000000..ca36691d4 --- /dev/null +++ b/smoketest/configs/egb-igp-route-maps @@ -0,0 +1,127 @@ +interfaces { + ethernet eth0 { + address 192.0.2.1/25 + duplex auto + smp-affinity auto + speed auto + } + ethernet eth1 { + address 192.0.2.129/25 + address 2001:db8::1234/64 + duplex auto + smp-affinity auto + speed auto + } + loopback lo { + } +} +policy { + route-map zebra-bgp { + rule 10 { + action permit + } + } + route-map zebra-isis { + rule 10 { + action permit + } + } + route-map zebra-ospf { + rule 10 { + action permit + } + } + route-map zebra-ospfv3 { + rule 10 { + action permit + } + } + route-map zebra-ripng { + rule 10 { + action permit + } + } + route-map zebra-static { + rule 10 { + action permit + } + } +} +protocols { + bgp 100 { + route-map zebra-bgp + } + isis { + interface eth0 { + } + net 49.0001.1921.6800.1002.00 + route-map zebra-isis + } + ospf { + area 0 { + network 192.0.2.0/25 + network 192.0.2.128/25 + } + log-adjacency-changes { + } + parameters { + abr-type cisco + router-id 1.1.1.1 + } + passive-interface default + passive-interface-exclude eth0 + passive-interface-exclude eth1 + route-map zebra-ospf + } + ospfv3 { + area 0 { + interface eth1 + } + parameters { + router-id 1.1.1.1 + } + route-map zebra-ospfv3 + } + ripng { + interface eth1 + route-map zebra-ripng + } + static { + route-map zebra-static + } +} +system { + config-management { + commit-revisions 100 + } + console { + device ttyS0 { + speed 115200 + } + } + host-name vyos + login { + user vyos { + authentication { + encrypted-password $6$O5gJRlDYQpj$MtrCV9lxMnZPMbcxlU7.FI793MImNHznxGoMFgm3Q6QP3vfKJyOSRCt3Ka/GzFQyW1yZS4NS616NLHaIPPFHc0 + plaintext-password "" + } + } + } + name-server 192.168.0.1 + syslog { + global { + archive { + file 5 + size 512 + } + facility all { + level info + } + } + } + time-zone Europe/Berlin +} +// Warning: Do not remove the following line. +// vyos-config-version: "broadcast-relay@1:cluster@1:config-management@1:conntrack@3:conntrack-sync@2:dhcp-relay@2:dhcp-server@6:dhcpv6-server@1:dns-forwarding@3:firewall@5:https@2:interfaces@22:ipoe-server@1:ipsec@5:isis@1:l2tp@3:lldp@1:mdns@1:nat@5:ntp@1:pppoe-server@5:pptp@2:qos@1:quagga@8:rpki@1:salt@1:snmp@2:ssh@2:sstp@3:system@21:vrrp@2:vyos-accel-ppp@2:wanloadbalance@3:webproxy@2:zone-policy@1" +// Release version: 1.3.2 diff --git a/smoketest/scripts/cli/test_protocols_bgp.py b/smoketest/scripts/cli/test_protocols_bgp.py index f6eede87a..2fd5d0c9b 100755 --- a/smoketest/scripts/cli/test_protocols_bgp.py +++ b/smoketest/scripts/cli/test_protocols_bgp.py @@ -713,7 +713,6 @@ class TestProtocolsBGP(VyOSUnitTestSHIM.TestCase): for prefix in listen_ranges: self.assertIn(f' bgp listen range {prefix} peer-group {peer_group}', frrconfig) - def test_bgp_07_l2vpn_evpn(self): vnis = ['10010', '10020', '10030'] neighbors = ['192.0.2.10', '192.0.2.20', '192.0.2.30'] @@ -743,26 +742,6 @@ class TestProtocolsBGP(VyOSUnitTestSHIM.TestCase): self.assertIn(f' advertise-default-gw', vniconfig) self.assertIn(f' advertise-svi-ip', vniconfig) - def test_bgp_08_zebra_route_map(self): - # Implemented because of T3328 - self.cli_set(base_path + ['route-map', route_map_in]) - # commit changes - self.cli_commit() - - # Verify FRR configuration - zebra_route_map = f'ip protocol bgp route-map {route_map_in}' - frrconfig = self.getFRRconfig(zebra_route_map) - self.assertIn(zebra_route_map, frrconfig) - - # Remove the route-map again - self.cli_delete(base_path + ['route-map']) - # commit changes - self.cli_commit() - - # Verify FRR configuration - frrconfig = self.getFRRconfig(zebra_route_map) - self.assertNotIn(zebra_route_map, frrconfig) - def test_bgp_09_distance_and_flowspec(self): distance_external = '25' distance_internal = '30' @@ -830,7 +809,6 @@ class TestProtocolsBGP(VyOSUnitTestSHIM.TestCase): self.cli_set(vrf_base + ['table', table]) self.cli_set(vrf_base + ['protocols', 'bgp', 'system-as', ASN]) self.cli_set(vrf_base + ['protocols', 'bgp', 'parameters', 'router-id', router_id]) - self.cli_set(vrf_base + ['protocols', 'bgp', 'route-map', route_map_in]) table = str(int(table) + 1000) # import VRF routes do main RIB @@ -843,7 +821,6 @@ class TestProtocolsBGP(VyOSUnitTestSHIM.TestCase): self.assertIn(f'router bgp {ASN}', frrconfig) self.assertIn(f' address-family ipv6 unicast', frrconfig) - for vrf in vrfs: self.assertIn(f' import vrf {vrf}', frrconfig) @@ -852,15 +829,6 @@ class TestProtocolsBGP(VyOSUnitTestSHIM.TestCase): self.assertIn(f'router bgp {ASN} vrf {vrf}', frr_vrf_config) self.assertIn(f' bgp router-id {router_id}', frr_vrf_config) - # XXX: Currently this is not working as FRR() class does not support - # route-maps for multiple vrfs because the modify_section() only works - # on lines and not text blocks. - # - # vrfconfig = self.getFRRconfig(f'vrf {vrf}') - # zebra_route_map = f' ip protocol bgp route-map {route_map_in}' - # self.assertIn(zebra_route_map, vrfconfig) - - def test_bgp_11_confederation(self): router_id = '127.10.10.2' confed_id = str(int(ASN) + 1) diff --git a/smoketest/scripts/cli/test_system_ip.py b/smoketest/scripts/cli/test_system_ip.py index f71ef5b3f..e7f7e3345 100755 --- a/smoketest/scripts/cli/test_system_ip.py +++ b/smoketest/scripts/cli/test_system_ip.py @@ -1,6 +1,6 @@ #!/usr/bin/env python3 # -# Copyright (C) 2020 VyOS maintainers and contributors +# Copyright (C) 2020-2023 VyOS maintainers and contributors # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License version 2 or later as @@ -17,6 +17,7 @@ import unittest from base_vyostest_shim import VyOSUnitTestSHIM +from vyos.configsession import ConfigSessionError from vyos.util import read_file base_path = ['system', 'ip'] @@ -82,5 +83,31 @@ class TestSystemIP(VyOSUnitTestSHIM.TestCase): self.assertEqual(read_file(gc_thresh2), str(size // 2)) self.assertEqual(read_file(gc_thresh1), str(size // 8)) + def test_system_ip_protocol_route_map(self): + protocols = ['any', 'babel', 'bgp', 'connected', 'eigrp', 'isis', + 'kernel', 'ospf', 'rip', 'static', 'table'] + + for protocol in protocols: + self.cli_set(['policy', 'route-map', f'route-map-{protocol}', 'rule', '10', 'action', 'permit']) + self.cli_set(base_path + ['protocol', protocol, 'route-map', f'route-map-{protocol}']) + + self.cli_commit() + + # Verify route-map properly applied to FRR + frrconfig = self.getFRRconfig('ip protocol', end='', daemon='zebra') + for protocol in protocols: + self.assertIn(f'ip protocol {protocol} route-map route-map-{protocol}', frrconfig) + + def test_system_ip_protocol_non_existing_route_map(self): + non_existing = 'non-existing' + self.cli_set(base_path + ['protocol', 'static', 'route-map', non_existing]) + + # VRF does yet not exist - an error must be thrown + with self.assertRaises(ConfigSessionError): + self.cli_commit() + self.cli_set(['policy', 'route-map', non_existing, 'rule', '10', 'action', 'deny']) + # Commit again + self.cli_commit() + if __name__ == '__main__': unittest.main(verbosity=2) diff --git a/smoketest/scripts/cli/test_system_ipv6.py b/smoketest/scripts/cli/test_system_ipv6.py index c8aea9100..e91b924fc 100755 --- a/smoketest/scripts/cli/test_system_ipv6.py +++ b/smoketest/scripts/cli/test_system_ipv6.py @@ -1,6 +1,6 @@ #!/usr/bin/env python3 # -# Copyright (C) 2021-2022 VyOS maintainers and contributors +# Copyright (C) 2021-2023 VyOS maintainers and contributors # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License version 2 or later as @@ -18,6 +18,7 @@ import unittest from base_vyostest_shim import VyOSUnitTestSHIM +from vyos.configsession import ConfigSessionError from vyos.template import is_ipv4 from vyos.util import read_file from vyos.util import get_interface_config @@ -88,5 +89,36 @@ class TestSystemIPv6(VyOSUnitTestSHIM.TestCase): self.assertEqual(read_file(gc_thresh2), str(size // 2)) self.assertEqual(read_file(gc_thresh1), str(size // 8)) + def test_system_ipv6_protocol_route_map(self): + protocols = ['any', 'babel', 'bgp', 'connected', 'isis', + 'kernel', 'ospfv3', 'ripng', 'static', 'table'] + + for protocol in protocols: + route_map = 'route-map-' + protocol.replace('ospfv3', 'ospf6') + + self.cli_set(['policy', 'route-map', route_map, 'rule', '10', 'action', 'permit']) + self.cli_set(base_path + ['protocol', protocol, 'route-map', route_map]) + + self.cli_commit() + + # Verify route-map properly applied to FRR + frrconfig = self.getFRRconfig('ipv6 protocol', end='', daemon='zebra') + for protocol in protocols: + # VyOS and FRR use a different name for OSPFv3 (IPv6) + if protocol == 'ospfv3': + protocol = 'ospf6' + self.assertIn(f'ipv6 protocol {protocol} route-map route-map-{protocol}', frrconfig) + + def test_system_ipv6_protocol_non_existing_route_map(self): + non_existing = 'non-existing6' + self.cli_set(base_path + ['protocol', 'static', 'route-map', non_existing]) + + # VRF does yet not exist - an error must be thrown + with self.assertRaises(ConfigSessionError): + self.cli_commit() + self.cli_set(['policy', 'route-map', non_existing, 'rule', '10', 'action', 'deny']) + # Commit again + self.cli_commit() + if __name__ == '__main__': unittest.main(verbosity=2) diff --git a/smoketest/scripts/cli/test_vrf.py b/smoketest/scripts/cli/test_vrf.py index 176c095fb..8016c0105 100755 --- a/smoketest/scripts/cli/test_vrf.py +++ b/smoketest/scripts/cli/test_vrf.py @@ -1,6 +1,6 @@ #!/usr/bin/env python3 # -# Copyright (C) 2020-2022 VyOS maintainers and contributors +# Copyright (C) 2020-2023 VyOS maintainers and contributors # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License version 2 or later as @@ -33,6 +33,8 @@ from vyos.validate import is_intf_addr_assigned base_path = ['vrf'] vrfs = ['red', 'green', 'blue', 'foo-bar', 'baz_foo'] +v4_protocols = ['any', 'babel', 'bgp', 'connected', 'eigrp', 'isis', 'kernel', 'ospf', 'rip', 'static', 'table'] +v6_protocols = ['any', 'babel', 'bgp', 'connected', 'isis', 'kernel', 'ospfv3', 'ripng', 'static', 'table'] class VRFTest(VyOSUnitTestSHIM.TestCase): _interfaces = [] @@ -291,5 +293,81 @@ class VRFTest(VyOSUnitTestSHIM.TestCase): self.assertEqual(read_file(f'/proc/sys/net/ipv4/conf/{vrf}/forwarding'), '0') self.assertEqual(read_file(f'/proc/sys/net/ipv6/conf/{vrf}/forwarding'), '0') + def test_vrf_ip_protocol_route_map(self): + table = '6000' + + for vrf in vrfs: + base = base_path + ['name', vrf] + self.cli_set(base + ['table', table]) + + for protocol in v4_protocols: + self.cli_set(['policy', 'route-map', f'route-map-{vrf}-{protocol}', 'rule', '10', 'action', 'permit']) + self.cli_set(base + ['ip', 'protocol', protocol, 'route-map', f'route-map-{vrf}-{protocol}']) + + table = str(int(table) + 1) + + self.cli_commit() + + # Verify route-map properly applied to FRR + for vrf in vrfs: + frrconfig = self.getFRRconfig(f'vrf {vrf}', daemon='zebra') + self.assertIn(f'vrf {vrf}', frrconfig) + for protocol in v4_protocols: + self.assertIn(f' ip protocol {protocol} route-map route-map-{vrf}-{protocol}', frrconfig) + + def test_vrf_ip_ipv6_protocol_non_existing_route_map(self): + table = '6100' + non_existing = 'non-existing' + + for vrf in vrfs: + base = base_path + ['name', vrf] + self.cli_set(base + ['table', table]) + for protocol in v4_protocols: + self.cli_set(base + ['ip', 'protocol', protocol, 'route-map', f'v4-{non_existing}']) + for protocol in v6_protocols: + self.cli_set(base + ['ipv6', 'protocol', protocol, 'route-map', f'v6-{non_existing}']) + + table = str(int(table) + 1) + + # Both v4 and v6 route-maps do not exist yet + with self.assertRaises(ConfigSessionError): + self.cli_commit() + self.cli_set(['policy', 'route-map', f'v4-{non_existing}', 'rule', '10', 'action', 'deny']) + + # v6 route-map does not exist yet + with self.assertRaises(ConfigSessionError): + self.cli_commit() + self.cli_set(['policy', 'route-map', f'v6-{non_existing}', 'rule', '10', 'action', 'deny']) + + # Commit again + self.cli_commit() + + def test_vrf_ipv6_protocol_route_map(self): + table = '6200' + + for vrf in vrfs: + base = base_path + ['name', vrf] + self.cli_set(base + ['table', table]) + + for protocol in v6_protocols: + route_map = f'route-map-{vrf}-{protocol.replace("ospfv3", "ospf6")}' + self.cli_set(['policy', 'route-map', route_map, 'rule', '10', 'action', 'permit']) + self.cli_set(base + ['ipv6', 'protocol', protocol, 'route-map', route_map]) + + table = str(int(table) + 1) + + self.cli_commit() + + # Verify route-map properly applied to FRR + for vrf in vrfs: + frrconfig = self.getFRRconfig(f'vrf {vrf}', daemon='zebra') + self.assertIn(f'vrf {vrf}', frrconfig) + for protocol in v6_protocols: + # VyOS and FRR use a different name for OSPFv3 (IPv6) + if protocol == 'ospfv3': + protocol = 'ospf6' + route_map = f'route-map-{vrf}-{protocol}' + self.assertIn(f' ipv6 protocol {protocol} route-map {route_map}', frrconfig) + if __name__ == '__main__': unittest.main(verbosity=2) diff --git a/src/conf_mode/protocols_bgp.py b/src/conf_mode/protocols_bgp.py index cf553f0e8..66505e58d 100755 --- a/src/conf_mode/protocols_bgp.py +++ b/src/conf_mode/protocols_bgp.py @@ -484,26 +484,15 @@ def generate(bgp): if not bgp or 'deleted' in bgp: return None - bgp['protocol'] = 'bgp' # required for frr/vrf.route-map.frr.j2 - bgp['frr_zebra_config'] = render_to_string('frr/vrf.route-map.frr.j2', bgp) bgp['frr_bgpd_config'] = render_to_string('frr/bgpd.frr.j2', bgp) - return None def apply(bgp): bgp_daemon = 'bgpd' - zebra_daemon = 'zebra' # Save original configuration prior to starting any commit actions frr_cfg = frr.FRRConfig() - # The route-map used for the FIB (zebra) is part of the zebra daemon - frr_cfg.load_configuration(zebra_daemon) - frr_cfg.modify_section(r'(\s+)?ip protocol bgp route-map [-a-zA-Z0-9.]+', stop_pattern='(\s|!)') - if 'frr_zebra_config' in bgp: - frr_cfg.add_before(frr.default_add_before, bgp['frr_zebra_config']) - frr_cfg.commit_configuration(zebra_daemon) - # Generate empty helper string which can be ammended to FRR commands, it # will be either empty (default VRF) or contain the "vrf <name" statement vrf = '' diff --git a/src/conf_mode/protocols_eigrp.py b/src/conf_mode/protocols_eigrp.py index 6e75e34ff..609b39065 100755 --- a/src/conf_mode/protocols_eigrp.py +++ b/src/conf_mode/protocols_eigrp.py @@ -78,24 +78,14 @@ def generate(eigrp): if not eigrp or 'deleted' in eigrp: return None - eigrp['protocol'] = 'eigrp' # required for frr/vrf.route-map.frr.j2 - eigrp['frr_zebra_config'] = render_to_string('frr/vrf.route-map.frr.j2', eigrp) eigrp['frr_eigrpd_config'] = render_to_string('frr/eigrpd.frr.j2', eigrp) def apply(eigrp): eigrp_daemon = 'eigrpd' - zebra_daemon = 'zebra' # Save original configuration prior to starting any commit actions frr_cfg = frr.FRRConfig() - # The route-map used for the FIB (zebra) is part of the zebra daemon - frr_cfg.load_configuration(zebra_daemon) - frr_cfg.modify_section(r'(\s+)?ip protocol eigrp route-map [-a-zA-Z0-9.]+', stop_pattern='(\s|!)') - if 'frr_zebra_config' in eigrp: - frr_cfg.add_before(frr.default_add_before, eigrp['frr_zebra_config']) - frr_cfg.commit_configuration(zebra_daemon) - # Generate empty helper string which can be ammended to FRR commands, it # will be either empty (default VRF) or contain the "vrf <name" statement vrf = '' diff --git a/src/conf_mode/protocols_isis.py b/src/conf_mode/protocols_isis.py index cb8ea3be4..af2937db8 100755 --- a/src/conf_mode/protocols_isis.py +++ b/src/conf_mode/protocols_isis.py @@ -203,7 +203,7 @@ def verify(isis): if list(set(global_range) & set(local_range)): raise ConfigError(f'Segment-Routing Global Block ({g_low_label_value}/{g_high_label_value}) '\ f'conflicts with Local Block ({l_low_label_value}/{l_high_label_value})!') - + # Check for a blank or invalid value per prefix if dict_search('segment_routing.prefix', isis): for prefix, prefix_config in isis['segment_routing']['prefix'].items(): @@ -218,7 +218,7 @@ def verify(isis): if dict_search('segment_routing.prefix', isis): for prefix, prefix_config in isis['segment_routing']['prefix'].items(): if 'absolute' in prefix_config: - if ("explicit_null" in prefix_config['absolute']) and ("no_php_flag" in prefix_config['absolute']): + if ("explicit_null" in prefix_config['absolute']) and ("no_php_flag" in prefix_config['absolute']): raise ConfigError(f'Segment routing prefix {prefix} cannot have both explicit-null '\ f'and no-php-flag configured at the same time.') elif 'index' in prefix_config: @@ -232,25 +232,15 @@ def generate(isis): if not isis or 'deleted' in isis: return None - isis['protocol'] = 'isis' # required for frr/vrf.route-map.frr.j2 - isis['frr_zebra_config'] = render_to_string('frr/vrf.route-map.frr.j2', isis) isis['frr_isisd_config'] = render_to_string('frr/isisd.frr.j2', isis) return None def apply(isis): isis_daemon = 'isisd' - zebra_daemon = 'zebra' # Save original configuration prior to starting any commit actions frr_cfg = frr.FRRConfig() - # The route-map used for the FIB (zebra) is part of the zebra daemon - frr_cfg.load_configuration(zebra_daemon) - frr_cfg.modify_section('(\s+)?ip protocol isis route-map [-a-zA-Z0-9.]+', stop_pattern='(\s|!)') - if 'frr_zebra_config' in isis: - frr_cfg.add_before(frr.default_add_before, isis['frr_zebra_config']) - frr_cfg.commit_configuration(zebra_daemon) - # Generate empty helper string which can be ammended to FRR commands, it # will be either empty (default VRF) or contain the "vrf <name" statement vrf = '' diff --git a/src/conf_mode/protocols_ospf.py b/src/conf_mode/protocols_ospf.py index eb64afa0c..fbb876123 100755 --- a/src/conf_mode/protocols_ospf.py +++ b/src/conf_mode/protocols_ospf.py @@ -256,25 +256,15 @@ def generate(ospf): if not ospf or 'deleted' in ospf: return None - ospf['protocol'] = 'ospf' # required for frr/vrf.route-map.frr.j2 - ospf['frr_zebra_config'] = render_to_string('frr/vrf.route-map.frr.j2', ospf) ospf['frr_ospfd_config'] = render_to_string('frr/ospfd.frr.j2', ospf) return None def apply(ospf): ospf_daemon = 'ospfd' - zebra_daemon = 'zebra' # Save original configuration prior to starting any commit actions frr_cfg = frr.FRRConfig() - # The route-map used for the FIB (zebra) is part of the zebra daemon - frr_cfg.load_configuration(zebra_daemon) - frr_cfg.modify_section('(\s+)?ip protocol ospf route-map [-a-zA-Z0-9.]+', stop_pattern='(\s|!)') - if 'frr_zebra_config' in ospf: - frr_cfg.add_before(frr.default_add_before, ospf['frr_zebra_config']) - frr_cfg.commit_configuration(zebra_daemon) - # Generate empty helper string which can be ammended to FRR commands, it # will be either empty (default VRF) or contain the "vrf <name" statement vrf = '' @@ -292,6 +282,7 @@ def apply(ospf): if 'frr_ospfd_config' in ospf: frr_cfg.add_before(frr.default_add_before, ospf['frr_ospfd_config']) + frr_cfg.commit_configuration(ospf_daemon) return None diff --git a/src/conf_mode/protocols_ospfv3.py b/src/conf_mode/protocols_ospfv3.py index 1e2c02d03..ee1fdd399 100755 --- a/src/conf_mode/protocols_ospfv3.py +++ b/src/conf_mode/protocols_ospfv3.py @@ -146,25 +146,15 @@ def generate(ospfv3): if not ospfv3 or 'deleted' in ospfv3: return None - ospfv3['protocol'] = 'ospf6' # required for frr/vrf.route-map.v6.frr.j2 - ospfv3['frr_zebra_config'] = render_to_string('frr/vrf.route-map.v6.frr.j2', ospfv3) ospfv3['new_frr_config'] = render_to_string('frr/ospf6d.frr.j2', ospfv3) return None def apply(ospfv3): ospf6_daemon = 'ospf6d' - zebra_daemon = 'zebra' # Save original configuration prior to starting any commit actions frr_cfg = frr.FRRConfig() - # The route-map used for the FIB (zebra) is part of the zebra daemon - frr_cfg.load_configuration(zebra_daemon) - frr_cfg.modify_section('(\s+)?ipv6 protocol ospf6 route-map [-a-zA-Z0-9.]+', stop_pattern='(\s|!)') - if 'frr_zebra_config' in ospfv3: - frr_cfg.add_before(frr.default_add_before, ospfv3['frr_zebra_config']) - frr_cfg.commit_configuration(zebra_daemon) - # Generate empty helper string which can be ammended to FRR commands, it # will be either empty (default VRF) or contain the "vrf <name" statement vrf = '' diff --git a/src/conf_mode/protocols_static.py b/src/conf_mode/protocols_static.py index 3e5ebb805..7b6150696 100755 --- a/src/conf_mode/protocols_static.py +++ b/src/conf_mode/protocols_static.py @@ -105,20 +105,14 @@ def generate(static): def apply(static): static_daemon = 'staticd' - zebra_daemon = 'zebra' # Save original configuration prior to starting any commit actions frr_cfg = frr.FRRConfig() - - # The route-map used for the FIB (zebra) is part of the zebra daemon - frr_cfg.load_configuration(zebra_daemon) - frr_cfg.modify_section(r'^ip protocol static route-map [-a-zA-Z0-9.]+', '') - frr_cfg.commit_configuration(zebra_daemon) frr_cfg.load_configuration(static_daemon) if 'vrf' in static: vrf = static['vrf'] - frr_cfg.modify_section(f'^vrf {vrf}', stop_pattern='^exit', remove_stop_mark=True) + frr_cfg.modify_section(f'^vrf {vrf}', stop_pattern='^exit-vrf', remove_stop_mark=True) else: frr_cfg.modify_section(r'^ip route .*') frr_cfg.modify_section(r'^ipv6 route .*') diff --git a/src/conf_mode/system-ip.py b/src/conf_mode/system-ip.py index 0c5063ed3..95865c690 100755 --- a/src/conf_mode/system-ip.py +++ b/src/conf_mode/system-ip.py @@ -1,6 +1,6 @@ #!/usr/bin/env python3 # -# Copyright (C) 2019-2022 VyOS maintainers and contributors +# Copyright (C) 2019-2023 VyOS maintainers and contributors # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License version 2 or later as @@ -18,12 +18,15 @@ from sys import exit from vyos.config import Config from vyos.configdict import dict_merge +from vyos.configverify import verify_route_map +from vyos.template import render_to_string from vyos.util import call from vyos.util import dict_search from vyos.util import sysctl_write from vyos.util import write_file from vyos.xml import defaults from vyos import ConfigError +from vyos import frr from vyos import airbag airbag.enable() @@ -40,13 +43,30 @@ def get_config(config=None): default_values = defaults(base) opt = dict_merge(default_values, opt) + # When working with FRR we need to know the corresponding address-family + opt['afi'] = 'ip' + + # We also need the route-map information from the config + # + # XXX: one MUST always call this without the key_mangling() option! See + # vyos.configverify.verify_common_route_maps() for more information. + tmp = {'policy' : {'route-map' : conf.get_config_dict(['policy', 'route-map'], + get_first_key=True)}} + # Merge policy dict into "regular" config dict + opt = dict_merge(tmp, opt) return opt def verify(opt): - pass + if 'protocol' in opt: + for protocol, protocol_options in opt['protocol'].items(): + if 'route_map' in protocol_options: + verify_route_map(protocol_options['route_map'], opt) + return def generate(opt): - pass + if 'protocol' in opt: + opt['frr_zebra_config'] = render_to_string('frr/zebra.route-map.frr.j2', opt) + return def apply(opt): # Apply ARP threshold values @@ -78,6 +98,18 @@ def apply(opt): value = '1' if (tmp != None) else '0' sysctl_write('net.ipv4.fib_multipath_hash_policy', value) + if 'protocol' in opt: + zebra_daemon = 'zebra' + # Save original configuration prior to starting any commit actions + frr_cfg = frr.FRRConfig() + + # The route-map used for the FIB (zebra) is part of the zebra daemon + frr_cfg.load_configuration(zebra_daemon) + frr_cfg.modify_section(r'ip protocol \w+ route-map [-a-zA-Z0-9.]+', stop_pattern='(\s|!)') + if 'frr_zebra_config' in opt: + frr_cfg.add_before(frr.default_add_before, opt['frr_zebra_config']) + frr_cfg.commit_configuration(zebra_daemon) + if __name__ == '__main__': try: c = get_config() diff --git a/src/conf_mode/system-ipv6.py b/src/conf_mode/system-ipv6.py index 26aacf46b..b6d3a79c3 100755 --- a/src/conf_mode/system-ipv6.py +++ b/src/conf_mode/system-ipv6.py @@ -1,6 +1,6 @@ #!/usr/bin/env python3 # -# Copyright (C) 2019-2022 VyOS maintainers and contributors +# Copyright (C) 2019-2023 VyOS maintainers and contributors # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License version 2 or later as @@ -19,11 +19,14 @@ import os from sys import exit from vyos.config import Config from vyos.configdict import dict_merge +from vyos.configverify import verify_route_map +from vyos.template import render_to_string from vyos.util import dict_search from vyos.util import sysctl_write from vyos.util import write_file from vyos.xml import defaults from vyos import ConfigError +from vyos import frr from vyos import airbag airbag.enable() @@ -41,13 +44,30 @@ def get_config(config=None): default_values = defaults(base) opt = dict_merge(default_values, opt) + # When working with FRR we need to know the corresponding address-family + opt['afi'] = 'ipv6' + + # We also need the route-map information from the config + # + # XXX: one MUST always call this without the key_mangling() option! See + # vyos.configverify.verify_common_route_maps() for more information. + tmp = {'policy' : {'route-map' : conf.get_config_dict(['policy', 'route-map'], + get_first_key=True)}} + # Merge policy dict into "regular" config dict + opt = dict_merge(tmp, opt) return opt def verify(opt): - pass + if 'protocol' in opt: + for protocol, protocol_options in opt['protocol'].items(): + if 'route_map' in protocol_options: + verify_route_map(protocol_options['route_map'], opt) + return def generate(opt): - pass + if 'protocol' in opt: + opt['frr_zebra_config'] = render_to_string('frr/zebra.route-map.frr.j2', opt) + return def apply(opt): # configure multipath @@ -78,6 +98,18 @@ def apply(opt): if name == 'accept_dad': write_file(os.path.join(root, name), value) + if 'protocol' in opt: + zebra_daemon = 'zebra' + # Save original configuration prior to starting any commit actions + frr_cfg = frr.FRRConfig() + + # The route-map used for the FIB (zebra) is part of the zebra daemon + frr_cfg.load_configuration(zebra_daemon) + frr_cfg.modify_section(r'ipv6 protocol \w+ route-map [-a-zA-Z0-9.]+', stop_pattern='(\s|!)') + if 'frr_zebra_config' in opt: + frr_cfg.add_before(frr.default_add_before, opt['frr_zebra_config']) + frr_cfg.commit_configuration(zebra_daemon) + if __name__ == '__main__': try: c = get_config() diff --git a/src/conf_mode/vrf.py b/src/conf_mode/vrf.py index c17cca3bd..a7ef4cb5c 100755 --- a/src/conf_mode/vrf.py +++ b/src/conf_mode/vrf.py @@ -20,9 +20,12 @@ from sys import exit from json import loads from vyos.config import Config +from vyos.configdict import dict_merge from vyos.configdict import node_changed +from vyos.configverify import verify_route_map from vyos.ifconfig import Interface from vyos.template import render +from vyos.template import render_to_string from vyos.util import call from vyos.util import cmd from vyos.util import dict_search @@ -99,6 +102,14 @@ def get_config(config=None): routes = vrf_routing(conf, name) if routes: vrf['vrf_remove'][name]['route'] = routes + # We also need the route-map information from the config + # + # XXX: one MUST always call this without the key_mangling() option! See + # vyos.configverify.verify_common_route_maps() for more information. + tmp = {'policy' : {'route-map' : conf.get_config_dict(['policy', 'route-map'], + get_first_key=True)}} + # Merge policy dict into "regular" config dict + vrf = dict_merge(tmp, vrf) return vrf def verify(vrf): @@ -116,35 +127,50 @@ def verify(vrf): reserved_names = ["add", "all", "broadcast", "default", "delete", "dev", "get", "inet", "mtu", "link", "type", "vrf"] table_ids = [] - for name, config in vrf['name'].items(): + for name, vrf_config in vrf['name'].items(): # Reserved VRF names if name in reserved_names: raise ConfigError(f'VRF name "{name}" is reserved and connot be used!') # table id is mandatory - if 'table' not in config: + if 'table' not in vrf_config: raise ConfigError(f'VRF "{name}" table id is mandatory!') # routing table id can't be changed - OS restriction if os.path.isdir(f'/sys/class/net/{name}'): tmp = str(dict_search('linkinfo.info_data.table', get_interface_config(name))) - if tmp and tmp != config['table']: + if tmp and tmp != vrf_config['table']: raise ConfigError(f'VRF "{name}" table id modification not possible!') # VRf routing table ID must be unique on the system - if config['table'] in table_ids: + if vrf_config['table'] in table_ids: raise ConfigError(f'VRF "{name}" table id is not unique!') - table_ids.append(config['table']) + table_ids.append(vrf_config['table']) + + tmp = dict_search('ip.protocol', vrf_config) + if tmp != None: + for protocol, protocol_options in tmp.items(): + if 'route_map' in protocol_options: + verify_route_map(protocol_options['route_map'], vrf) + + tmp = dict_search('ipv6.protocol', vrf_config) + if tmp != None: + for protocol, protocol_options in tmp.items(): + if 'route_map' in protocol_options: + verify_route_map(protocol_options['route_map'], vrf) return None def generate(vrf): + # Render iproute2 VR helper names render(config_file, 'iproute2/vrf.conf.j2', vrf) # Render nftables zones config render(nft_vrf_config, 'firewall/nftables-vrf-zones.j2', vrf) - return None + # Render VRF Kernel/Zebra route-map filters + vrf['frr_zebra_config'] = render_to_string('frr/zebra.vrf.route-map.frr.j2', vrf) + return None def apply(vrf): # Documentation @@ -249,6 +275,17 @@ def apply(vrf): nft_add_element = f'add element inet vrf_zones ct_iface_map {{ "{name}" : {table} }}' cmd(f'nft {nft_add_element}') + # Apply FRR filters + zebra_daemon = 'zebra' + # Save original configuration prior to starting any commit actions + frr_cfg = frr.FRRConfig() + + # The route-map used for the FIB (zebra) is part of the zebra daemon + frr_cfg.load_configuration(zebra_daemon) + frr_cfg.modify_section(f'^vrf .+', stop_pattern='^exit-vrf', remove_stop_mark=True) + if 'frr_zebra_config' in vrf: + frr_cfg.add_before(frr.default_add_before, vrf['frr_zebra_config']) + frr_cfg.commit_configuration(zebra_daemon) # return to default lookup preference when no VRF is configured if 'name' not in vrf: diff --git a/src/conf_mode/vrf_vni.py b/src/conf_mode/vrf_vni.py deleted file mode 100755 index 585fdbebf..000000000 --- a/src/conf_mode/vrf_vni.py +++ /dev/null @@ -1,65 +0,0 @@ -#!/usr/bin/env python3 -# -# Copyright (C) 2020-2021 VyOS maintainers and contributors -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License version 2 or later as -# published by the Free Software Foundation. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. - -from sys import argv -from sys import exit - -from vyos.config import Config -from vyos.template import render_to_string -from vyos import ConfigError -from vyos import frr -from vyos import airbag -airbag.enable() - -frr_daemon = 'zebra' - -def get_config(config=None): - if config: - conf = config - else: - conf = Config() - - base = ['vrf'] - vrf = conf.get_config_dict(base, get_first_key=True) - return vrf - -def verify(vrf): - return None - -def generate(vrf): - vrf['new_frr_config'] = render_to_string('frr/vrf-vni.frr.j2', vrf) - return None - -def apply(vrf): - # add configuration to FRR - frr_cfg = frr.FRRConfig() - frr_cfg.load_configuration(frr_daemon) - frr_cfg.modify_section(f'^vrf .+', stop_pattern='^exit-vrf', remove_stop_mark=True) - if 'new_frr_config' in vrf: - frr_cfg.add_before(frr.default_add_before, vrf['new_frr_config']) - frr_cfg.commit_configuration(frr_daemon) - - return None - -if __name__ == '__main__': - try: - c = get_config() - verify(c) - generate(c) - apply(c) - except ConfigError as e: - print(e) - exit(1) diff --git a/src/migration-scripts/bgp/3-to-4 b/src/migration-scripts/bgp/3-to-4 new file mode 100755 index 000000000..0df2fbec4 --- /dev/null +++ b/src/migration-scripts/bgp/3-to-4 @@ -0,0 +1,64 @@ +#!/usr/bin/env python3 +# +# Copyright (C) 2023 VyOS maintainers and contributors +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 or later as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# T5150: Rework CLI definitions to apply route-maps between routing daemons +# and zebra/kernel + +from sys import argv +from sys import exit + +from vyos.configtree import ConfigTree + +if (len(argv) < 1): + print("Must specify file name!") + exit(1) + +file_name = argv[1] + +with open(file_name, 'r') as f: + config_file = f.read() + +config = ConfigTree(config_file) + +bgp_base = ['protocols', 'bgp'] +# Check if BGP is configured - if so, migrate the CLI node +if config.exists(bgp_base): + if config.exists(bgp_base + ['route-map']): + tmp = config.return_value(bgp_base + ['route-map']) + + config.set(['system', 'ip', 'protocol', 'bgp', 'route-map'], value=tmp) + config.set_tag(['system', 'ip', 'protocol']) + config.delete(bgp_base + ['route-map']) + + +# Check if vrf names are configured. Check if BGP is configured - if so, migrate +# the CLI node(s) +if config.exists(['vrf', 'name']): + for vrf in config.list_nodes(['vrf', 'name']): + vrf_base = ['vrf', 'name', vrf] + if config.exists(vrf_base + ['protocols', 'bgp', 'route-map']): + tmp = config.return_value(vrf_base + ['protocols', 'bgp', 'route-map']) + + config.set(vrf_base + ['ip', 'protocol', 'bgp', 'route-map'], value=tmp) + config.set_tag(vrf_base + ['ip', 'protocol', 'bgp']) + config.delete(vrf_base + ['protocols', 'bgp', 'route-map']) + +try: + with open(file_name, 'w') as f: + f.write(config.to_string()) +except OSError as e: + print(f'Failed to save the modified config: {e}') + exit(1) diff --git a/src/migration-scripts/isis/2-to-3 b/src/migration-scripts/isis/2-to-3 new file mode 100755 index 000000000..4490feb0a --- /dev/null +++ b/src/migration-scripts/isis/2-to-3 @@ -0,0 +1,63 @@ +#!/usr/bin/env python3 +# +# Copyright (C) 2023 VyOS maintainers and contributors +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 or later as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# T5150: Rework CLI definitions to apply route-maps between routing daemons +# and zebra/kernel + +from sys import argv +from sys import exit + +from vyos.configtree import ConfigTree + +if (len(argv) < 1): + print("Must specify file name!") + exit(1) + +file_name = argv[1] + +with open(file_name, 'r') as f: + config_file = f.read() + +config = ConfigTree(config_file) + +isis_base = ['protocols', 'isis'] +# Check if IS-IS is configured - if so, migrate the CLI node +if config.exists(isis_base): + if config.exists(isis_base + ['route-map']): + tmp = config.return_value(isis_base + ['route-map']) + + config.set(['system', 'ip', 'protocol', 'isis', 'route-map'], value=tmp) + config.set_tag(['system', 'ip', 'protocol']) + config.delete(isis_base + ['route-map']) + +# Check if vrf names are configured. Check if IS-IS is configured - if so, +# migrate the CLI node(s) +if config.exists(['vrf', 'name']): + for vrf in config.list_nodes(['vrf', 'name']): + vrf_base = ['vrf', 'name', vrf] + if config.exists(vrf_base + ['protocols', 'isis', 'route-map']): + tmp = config.return_value(vrf_base + ['protocols', 'isis', 'route-map']) + + config.set(vrf_base + ['ip', 'protocol', 'isis', 'route-map'], value=tmp) + config.set_tag(vrf_base + ['ip', 'protocol', 'isis']) + config.delete(vrf_base + ['protocols', 'isis', 'route-map']) + +try: + with open(file_name, 'w') as f: + f.write(config.to_string()) +except OSError as e: + print(f'Failed to save the modified config: {e}') + exit(1) diff --git a/src/migration-scripts/ospf/1-to-2 b/src/migration-scripts/ospf/1-to-2 new file mode 100755 index 000000000..a6beaf04e --- /dev/null +++ b/src/migration-scripts/ospf/1-to-2 @@ -0,0 +1,80 @@ +#!/usr/bin/env python3 +# +# Copyright (C) 2023 VyOS maintainers and contributors +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 or later as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# T5150: Rework CLI definitions to apply route-maps between routing daemons +# and zebra/kernel + +from sys import argv +from sys import exit + +from vyos.configtree import ConfigTree + +if (len(argv) < 1): + print("Must specify file name!") + exit(1) + +file_name = argv[1] + +with open(file_name, 'r') as f: + config_file = f.read() + +config = ConfigTree(config_file) + +ospf_base = ['protocols', 'ospf'] +# Check if OSPF is configured - if so, migrate the CLI node +if config.exists(ospf_base): + if config.exists(ospf_base + ['route-map']): + tmp = config.return_value(ospf_base + ['route-map']) + + config.set(['system', 'ip', 'protocol', 'ospf', 'route-map'], value=tmp) + config.set_tag(['system', 'ip', 'protocol']) + config.delete(ospf_base + ['route-map']) + +ospfv3_base = ['protocols', 'ospfv3'] +# Check if OSPFv3 is configured - if so, migrate the CLI node +if config.exists(ospfv3_base): + if config.exists(ospfv3_base + ['route-map']): + tmp = config.return_value(ospfv3_base + ['route-map']) + + config.set(['system', 'ipv6', 'protocol', 'ospfv3', 'route-map'], value=tmp) + config.set_tag(['system', 'ipv6', 'protocol']) + config.delete(ospfv3_base + ['route-map']) + +# Check if vrf names are configured. Check if OSPF/OSPFv3 is configured - if so, +# migrate the CLI node(s) +if config.exists(['vrf', 'name']): + for vrf in config.list_nodes(['vrf', 'name']): + vrf_base = ['vrf', 'name', vrf] + if config.exists(vrf_base + ['protocols', 'ospf', 'route-map']): + tmp = config.return_value(vrf_base + ['protocols', 'ospf', 'route-map']) + + config.set(vrf_base + ['ip', 'protocol', 'ospf', 'route-map'], value=tmp) + config.set_tag(vrf_base + ['ip', 'protocol', 'ospf']) + config.delete(vrf_base + ['protocols', 'ospf', 'route-map']) + + if config.exists(vrf_base + ['protocols', 'ospfv3', 'route-map']): + tmp = config.return_value(vrf_base + ['protocols', 'ospfv3', 'route-map']) + + config.set(vrf_base + ['ipv6', 'protocol', 'ospfv3', 'route-map'], value=tmp) + config.set_tag(vrf_base + ['ipv6', 'protocol', 'ospfv6']) + config.delete(vrf_base + ['protocols', 'ospfv3', 'route-map']) + +try: + with open(file_name, 'w') as f: + f.write(config.to_string()) +except OSError as e: + print(f'Failed to save the modified config: {e}') + exit(1) diff --git a/src/migration-scripts/quagga/10-to-11 b/src/migration-scripts/quagga/10-to-11 new file mode 100755 index 000000000..04fc16f79 --- /dev/null +++ b/src/migration-scripts/quagga/10-to-11 @@ -0,0 +1,51 @@ +#!/usr/bin/env python3 +# +# Copyright (C) 2023 VyOS maintainers and contributors +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 or later as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# T5150: Rework CLI definitions to apply route-maps between routing daemons +# and zebra/kernel + +from sys import argv +from sys import exit + +from vyos.configtree import ConfigTree + +if (len(argv) < 1): + print("Must specify file name!") + exit(1) + +file_name = argv[1] + +with open(file_name, 'r') as f: + config_file = f.read() + +config = ConfigTree(config_file) + +static_base = ['protocols', 'static'] +# Check if static routes are configured - if so, migrate the CLI node +if config.exists(static_base): + if config.exists(static_base + ['route-map']): + tmp = config.return_value(static_base + ['route-map']) + + config.set(['system', 'ip', 'protocol', 'static', 'route-map'], value=tmp) + config.set_tag(['system', 'ip', 'protocol']) + config.delete(static_base + ['route-map']) + +try: + with open(file_name, 'w') as f: + f.write(config.to_string()) +except OSError as e: + print(f'Failed to save the modified config: {e}') + exit(1) diff --git a/src/migration-scripts/rip/0-to-1 b/src/migration-scripts/rip/0-to-1 new file mode 100755 index 000000000..60d510001 --- /dev/null +++ b/src/migration-scripts/rip/0-to-1 @@ -0,0 +1,51 @@ +#!/usr/bin/env python3 +# +# Copyright (C) 2023 VyOS maintainers and contributors +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 or later as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# T5150: Rework CLI definitions to apply route-maps between routing daemons +# and zebra/kernel + +from sys import argv +from sys import exit + +from vyos.configtree import ConfigTree + +if (len(argv) < 1): + print("Must specify file name!") + exit(1) + +file_name = argv[1] + +with open(file_name, 'r') as f: + config_file = f.read() + +config = ConfigTree(config_file) + +ripng_base = ['protocols', 'ripng'] +# Check if RIPng is configured - if so, migrate the CLI node +if config.exists(ripng_base): + if config.exists(ripng_base + ['route-map']): + tmp = config.return_value(ripng_base + ['route-map']) + + config.set(['system', 'ipv6', 'protocol', 'ripng', 'route-map'], value=tmp) + config.set_tag(['system', 'ipv6', 'protocol']) + config.delete(ripng_base + ['route-map']) + +try: + with open(file_name, 'w') as f: + f.write(config.to_string()) +except OSError as e: + print(f'Failed to save the modified config: {e}') + exit(1) |