diff options
| -rw-r--r-- | Jenkinsfile | 2 | ||||
| -rw-r--r-- | python/vyos/config.py | 4 | ||||
| -rwxr-xr-x | src/conf_mode/ssh.py | 7 | ||||
| -rwxr-xr-x | src/etc/init.d/igmpproxy | 166 |
4 files changed, 4 insertions, 175 deletions
diff --git a/Jenkinsfile b/Jenkinsfile index 7b6dc49e3..a169b8f2c 100644 --- a/Jenkinsfile +++ b/Jenkinsfile @@ -73,7 +73,7 @@ pipeline { agent { docker { args '--sysctl net.ipv6.conf.lo.disable_ipv6=0 -e GOSU_UID=1006 -e GOSU_GID=1006' - image 'vyos/vyos-build:current' + image 'vyos/vyos-build:equuleus' alwaysPull true } } diff --git a/python/vyos/config.py b/python/vyos/config.py index 441944338..1a0da3e54 100644 --- a/python/vyos/config.py +++ b/python/vyos/config.py @@ -126,7 +126,7 @@ class Config(object): # It may cause problems with exists() when it's used for checking values, # since values may contain whitespace. if isinstance(path, str): - path = re.split(r'\s*', path) + path = re.split(r'\s+', path) elif isinstance(path, list): pass else: @@ -161,7 +161,7 @@ class Config(object): # XXX: for small strings in-place concatenation is not a problem if isinstance(path, str): if path: - self._level = re.split(r'\s*', path) + self._level = re.split(r'\s+', path) else: self._level = [] elif isinstance(path, list): diff --git a/src/conf_mode/ssh.py b/src/conf_mode/ssh.py index e3b11b537..9fe22bfee 100755 --- a/src/conf_mode/ssh.py +++ b/src/conf_mode/ssh.py @@ -37,16 +37,11 @@ HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key HostKey /etc/ssh/ssh_host_ecdsa_key HostKey /etc/ssh/ssh_host_ed25519_key -UsePrivilegeSeparation yes -KeyRegenerationInterval 3600 -ServerKeyBits 1024 SyslogFacility AUTH LoginGraceTime 120 StrictModes yes -RSAAuthentication yes PubkeyAuthentication yes IgnoreRhosts yes -RhostsRSAAuthentication no HostbasedAuthentication no PermitEmptyPasswords no ChallengeResponseAuthentication no @@ -58,7 +53,7 @@ TCPKeepAlive yes Banner /etc/issue.net Subsystem sftp /usr/lib/openssh/sftp-server UsePAM yes -HostKey /etc/ssh/ssh_host_key +HostKey /etc/ssh/ssh_host_rsa_key # Specifies whether sshd should look up the remote host name, # and to check that the resolved host name for the remote IP diff --git a/src/etc/init.d/igmpproxy b/src/etc/init.d/igmpproxy deleted file mode 100755 index 4a2c94a4d..000000000 --- a/src/etc/init.d/igmpproxy +++ /dev/null @@ -1,166 +0,0 @@ -#!/bin/sh -### BEGIN INIT INFO -# Provides: igmpproxy -# Required-Start: $local_fs $network $remote_fs $syslog -# Required-Stop: $local_fs $network $remote_fs $syslog -# Default-Start: 2 3 4 5 -# Default-Stop: 0 1 6 -# Short-Description: IGMP multicast routing daemon -# Description: IGMPproxy is a simple dynamic Multicast Routing Daemon -# using only IGMP signalling. It's intended for simple -# forwarding of Multicast traffic between networks. -### END INIT INFO - -# Author: Pali Rohár <pali.rohar@gmail.com> - -# Do NOT "set -e" - -# PATH should only include /usr/* if it runs after the mountnfs.sh script -PATH=/sbin:/usr/sbin:/bin:/usr/bin -DESC="igmpproxy" -NAME=igmpproxy -DAEMON=/sbin/igmpproxy -DAEMON_ARGS="/etc/igmpproxy.conf" -PIDFILE=/var/run/$NAME.pid -SCRIPTNAME=/etc/init.d/$NAME - -# Exit if the package is not installed -[ -x "$DAEMON" ] || exit 0 - -# Read configuration variable file if it is present -[ -r /etc/default/$NAME ] && . /etc/default/$NAME - -# Load the VERBOSE setting and other rcS variables -. /lib/init/vars.sh - -# Define LSB log_* functions. -# Depend on lsb-base (>= 3.2-14) to ensure that this file is present -# and status_of_proc is working. -. /lib/lsb/init-functions - -# -# Function that starts the daemon/service -# -do_start() -{ - # Return - # 0 if daemon has been started - # 1 if daemon was already running - # 2 if daemon could not be started - start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \ - || return 1 - start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -b -m -- \ - $DAEMON_OPTS $DAEMON_ARGS \ - || return 2 - # The above code will not work for interpreted scripts, use the next - # six lines below instead (Ref: #643337, start-stop-daemon(8) ) - #start-stop-daemon --start --quiet --pidfile $PIDFILE --startas $DAEMON \ - # --name $NAME --test > /dev/null \ - # || return 1 - #start-stop-daemon --start --quiet --pidfile $PIDFILE --startas $DAEMON \ - # --name $NAME -- $DAEMON_ARGS \ - # || return 2 - - # Add code here, if necessary, that waits for the process to be ready - # to handle requests from services started subsequently which depend - # on this one. As a last resort, sleep for some time. -} - -# -# Function that stops the daemon/service -# -do_stop() -{ - # Return - # 0 if daemon has been stopped - # 1 if daemon was already stopped - # 2 if daemon could not be stopped - # other if a failure occurred - start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME - RETVAL="$?" - [ "$RETVAL" = 2 ] && return 2 - # Wait for children to finish too if this is a daemon that forks - # and if the daemon is only ever run from this initscript. - # If the above conditions are not satisfied then add some other code - # that waits for the process to drop all resources that could be - # needed by services started subsequently. A last resort is to - # sleep for some time. - start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON - [ "$?" = 2 ] && return 2 - # Many daemons don't delete their pidfiles when they exit. - rm -f $PIDFILE - return "$RETVAL" -} - -# -# Function that sends a SIGHUP to the daemon/service -# -do_reload() { - # - # If the daemon can reload its configuration without - # restarting (for example, when it is sent a SIGHUP), - # then implement that here. - # - start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME - return 0 -} - -case "$1" in - start) - [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC " "$NAME" - do_start - case "$?" in - 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; - 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; - esac - ;; - stop) - [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME" - do_stop - case "$?" in - 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; - 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; - esac - ;; - status) - status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $? - ;; - #reload|force-reload) - # - # If do_reload() is not implemented then leave this commented out - # and leave 'force-reload' as an alias for 'restart'. - # - #log_daemon_msg "Reloading $DESC" "$NAME" - #do_reload - #log_end_msg $? - #;; - restart|force-reload) - # - # If the "reload" option is implemented then remove the - # 'force-reload' alias - # - log_daemon_msg "Restarting $DESC" "$NAME" - do_stop - case "$?" in - 0|1) - do_start - case "$?" in - 0) log_end_msg 0 ;; - 1) log_end_msg 1 ;; # Old process is still running - *) log_end_msg 1 ;; # Failed to start - esac - ;; - *) - # Failed to stop - log_end_msg 1 - ;; - esac - ;; - *) - #echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2 - echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2 - exit 3 - ;; -esac - -: |