summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--data/configd-include.json1
-rw-r--r--data/templates/firewall/upnpd.conf.j2227
-rw-r--r--debian/control3
-rwxr-xr-xsrc/conf_mode/service_upnp.py157
-rw-r--r--src/systemd/miniupnpd.service13
5 files changed, 1 insertions, 400 deletions
diff --git a/data/configd-include.json b/data/configd-include.json
index 6edf350ec..a13618313 100644
--- a/data/configd-include.json
+++ b/data/configd-include.json
@@ -79,7 +79,6 @@
"service_sla.py",
"service_ssh.py",
"service_tftp-server.py",
-"service_upnp.py",
"service_webproxy.py",
"system_acceleration.py",
"system_config-management.py",
diff --git a/data/templates/firewall/upnpd.conf.j2 b/data/templates/firewall/upnpd.conf.j2
deleted file mode 100644
index 616e8869f..000000000
--- a/data/templates/firewall/upnpd.conf.j2
+++ /dev/null
@@ -1,227 +0,0 @@
-# This is the UPNP configuration file
-
-# WAN network interface
-ext_ifname={{ wan_interface }}
-{% if wan_ip is vyos_defined %}
-
-# if the WAN network interface for IPv6 is different than for IPv4,
-# set ext_ifname6
-#ext_ifname6=eth2
-
-# If the WAN interface has several IP addresses, you
-# can specify the one to use below.
-# Setting ext_ip is also useful in double NAT setup, you can declare here
-# the public IP address.
-{% for addr in wan_ip %}
-ext_ip={{ addr }}
-{% endfor %}
-{% endif %}
-
-{% if stun is vyos_defined %}
-# WAN interface must have public IP address. Otherwise it is behind NAT
-# and port forwarding is impossible. In some cases WAN interface can be
-# behind unrestricted full-cone NAT 1:1 when all incoming traffic is NAT-ed and
-# routed to WAN interfaces without any filtering. In this cases miniupnpd
-# needs to know public IP address and it can be learnt by asking external
-# server via STUN protocol. Following option enable retrieving external
-# public IP address from STUN server and detection of NAT type. You need
-# to specify also external STUN server in stun_host option below.
-# This option is disabled by default.
-ext_perform_stun=yes
-# Specify STUN server, either hostname or IP address
-# Some public STUN servers:
-# stun.stunprotocol.org
-# stun.sipgate.net
-# stun.xten.com
-# stun.l.google.com (on non standard port 19302)
-ext_stun_host={{ stun.host }}
-# Specify STUN UDP port, by default it is standard port 3478.
-ext_stun_port={{ stun.port }}
-{% endif %}
-
-# LAN network interfaces IPs / networks
-{% if listen is vyos_defined %}
-# There can be multiple listening IPs for SSDP traffic, in that case
-# use multiple 'listening_ip=...' lines, one for each network interface.
-# It can be IP address or network interface name (ie. "eth0")
-# It is mandatory to use the network interface name in order to enable IPv6
-# HTTP is available on all interfaces.
-# When MULTIPLE_EXTERNAL_IP is enabled, the external IP
-# address associated with the subnet follows. For example:
-# listening_ip=192.168.0.1/24 88.22.44.13
-# When MULTIPLE_EXTERNAL_IP is disabled, you can list associated network
-# interfaces (for bridges)
-# listening_ip=bridge0 em0 wlan0
-{% for addr in listen %}
-{% if addr | is_ipv4 %}
-listening_ip={{ addr }}
-{% elif addr | is_ipv6 %}
-ipv6_listening_ip={{ addr }}
-{% else %}
-listening_ip={{ addr }}
-{% endif %}
-{% endfor %}
-{% endif %}
-
-# CAUTION: mixing up WAN and LAN interfaces may introduce security risks!
-# Be sure to assign the correct interfaces to LAN and WAN and consider
-# implementing UPnP permission rules at the bottom of this configuration file
-
-# Port for HTTP (descriptions and SOAP) traffic. Set to 0 for autoselect.
-#http_port=0
-# Port for HTTPS. Set to 0 for autoselect (default)
-#https_port=0
-
-# Path to the UNIX socket used to communicate with MiniSSDPd
-# If running, MiniSSDPd will manage M-SEARCH answering.
-# default is /var/run/minissdpd.sock
-#minissdpdsocket=/var/run/minissdpd.sock
-
-{% if nat_pmp is vyos_defined %}
-# Enable NAT-PMP support (default is no)
-enable_natpmp=yes
-{% endif %}
-
-# Enable UPNP support (default is yes)
-enable_upnp=yes
-
-{% if pcp_lifetime is vyos_defined %}
-# PCP
-# Configure the minimum and maximum lifetime of a port mapping in seconds
-# 120s and 86400s (24h) are suggested values from PCP-base
-{% if pcp_lifetime.max is vyos_defined %}
-max_lifetime={{ pcp_lifetime.max }}
-{% endif %}
-{% if pcp_lifetime.min is vyos_defined %}
-min_lifetime={{ pcp_lifetime.min }}
-{% endif %}
-{% endif %}
-
-# table names for netfilter nft. Default is "filter" for both
-#upnp_table_name=
-#upnp_nat_table_name=
-# chain names for netfilter and netfilter nft
-# netfilter : default are MINIUPNPD, MINIUPNPD, MINIUPNPD-POSTROUTING
-# netfilter nft : default are miniupnpd, prerouting_miniupnpd, postrouting_miniupnpd
-#upnp_forward_chain=forwardUPnP
-#upnp_nat_chain=UPnP
-#upnp_nat_postrouting_chain=UPnP-Postrouting
-
-# Lease file location
-lease_file=/config/upnp.leases
-
-# To enable the next few runtime options, see compile time
-# ENABLE_MANUFACTURER_INFO_CONFIGURATION (config.h)
-
-{% if friendly_name is vyos_defined %}
-# Name of this service, default is "`uname -s` router"
-friendly_name={{ friendly_name }}
-{% endif %}
-
-# Manufacturer name, default is "`uname -s`"
-manufacturer_name=VyOS
-
-# Manufacturer URL, default is URL of OS vendor
-manufacturer_url=https://vyos.io/
-
-# Model name, default is "`uname -s` router"
-model_name=VyOS Router Model
-
-# Model description, default is "`uname -s` router"
-model_description=Vyos open source enterprise router/firewall operating system
-
-# Model URL, default is URL of OS vendor
-model_url=https://vyos.io/
-
-# Bitrates reported by daemon in bits per second
-# by default miniupnpd tries to get WAN interface speed
-#bitrate_up=1000000
-#bitrate_down=10000000
-
-{% if secure_mode is vyos_defined %}
-# Secure Mode, UPnP clients can only add mappings to their own IP
-secure_mode=yes
-{% else %}
-# Secure Mode, UPnP clients can only add mappings to their own IP
-secure_mode=no
-{% endif %}
-
-{% if presentation_url is vyos_defined %}
-# Default presentation URL is HTTP address on port 80
-# If set to an empty string, no presentationURL element will appear
-# in the XML description of the device, which prevents MS Windows
-# from displaying an icon in the "Network Connections" panel.
-#presentation_url= {{ presentation_url }}
-{% endif %}
-
-# Report system uptime instead of daemon uptime
-system_uptime=yes
-
-# Notify interval in seconds. default is 30 seconds.
-#notify_interval=240
-notify_interval=60
-
-# Unused rules cleaning.
-# never remove any rule before this threshold for the number
-# of redirections is exceeded. default to 20
-clean_ruleset_threshold=10
-# Clean process work interval in seconds. default to 0 (disabled).
-# a 600 seconds (10 minutes) interval makes sense
-clean_ruleset_interval=600
-
-############################################################################
-## The next 5 config parameters (packet_log, anchor, queue, tag, quickrules)
-## are specific to BSD's pf(4) packet filter and hence cannot be enabled in
-## VyOS.
-# Log packets in pf (default is no)
-#packet_log=no
-
-# Anchor name in pf (default is miniupnpd)
-#anchor=miniupnpd
-
-# ALTQ queue in pf
-# Filter rules must be used for this to be used.
-# compile with PF_ENABLE_FILTER_RULES (see config.h file)
-#queue=queue_name1
-
-# Tag name in pf
-#tag=tag_name1
-
-# Make filter rules in pf quick or not. default is yes
-# active when compiled with PF_ENABLE_FILTER_RULES (see config.h file)
-#quickrules=no
-##
-## End of pf(4)-specific configuration not to be set in VyOS.
-############################################################################
-
-# UUID, generate your own UUID with "make genuuid"
-uuid={{ uuid }}
-
-# Daemon's serial and model number when reporting to clients
-# (in XML description)
-#serial=12345678
-#model_number=1
-
-# If compiled with IGD_V2 defined, force reporting IGDv1 in rootDesc (default
-# is no)
-#force_igd_desc_v1=no
-
-{% if rule is vyos_defined %}
-# UPnP permission rules (also enforced for NAT-PMP and PCP)
-# (allow|deny) (external port range) IP/mask (internal port range) (optional regex filter)
-# A port range is <min port>-<max port> or <port> if there is only
-# one port in the range.
-# IP/mask format must be nnn.nnn.nnn.nnn/nn
-# It is advised to only allow redirection of port >= 1024
-# and end the rule set with "deny 0-65535 0.0.0.0/0 0-65535"
-# The following default ruleset allows specific LAN side IP addresses
-# to request only ephemeral ports. It is recommended that users
-# modify the IP ranges to match their own internal networks, and
-# also consider implementing network-specific restrictions
-# CAUTION: failure to enforce any rules may permit insecure requests to be made!
-{% for rule, config in rule.items() %}
-{% if config.disable is not vyos_defined %}
-{{ config.action }} {{ config.external_port_range }} {{ config.ip }}{{ '/32' if '/' not in config.ip else '' }} {{ config.internal_port_range }}
-{% endif %}
-{% endfor %}
-{% endif %}
diff --git a/debian/control b/debian/control
index 0b6a5adf2..3501af1bd 100644
--- a/debian/control
+++ b/debian/control
@@ -192,8 +192,7 @@ Depends:
wireless-regdb,
wpasupplicant (>= 0.6.7),
zabbix-agent2,
- ndppd,
- miniupnpd-nftables
+ ndppd
Description: VyOS configuration scripts and data
VyOS configuration scripts, interface definitions, and everything
diff --git a/src/conf_mode/service_upnp.py b/src/conf_mode/service_upnp.py
deleted file mode 100755
index 0df8dc09e..000000000
--- a/src/conf_mode/service_upnp.py
+++ /dev/null
@@ -1,157 +0,0 @@
-#!/usr/bin/env python3
-#
-# Copyright (C) 2021-2022 VyOS maintainers and contributors
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 or later as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-import os
-
-from sys import exit
-import uuid
-import netifaces
-from ipaddress import IPv4Network
-from ipaddress import IPv6Network
-
-from vyos.config import Config
-from vyos.utils.process import call
-from vyos.template import render
-from vyos.template import is_ipv4
-from vyos.template import is_ipv6
-from vyos import ConfigError
-from vyos import airbag
-airbag.enable()
-
-config_file = r'/run/upnp/miniupnp.conf'
-
-def get_config(config=None):
- if config:
- conf = config
- else:
- conf = Config()
-
- base = ['service', 'upnp']
- upnpd = conf.get_config_dict(base, key_mangling=('-', '_'), get_first_key=True)
-
- if not upnpd:
- return None
-
- upnpd = conf.merge_defaults(upnpd, recursive=True)
-
- uuidgen = uuid.uuid1()
- upnpd.update({'uuid': uuidgen})
-
- return upnpd
-
-def get_all_interface_addr(prefix, filter_dev, filter_family):
- list_addr = []
- for interface in netifaces.interfaces():
- if filter_dev and interface in filter_dev:
- continue
- addrs = netifaces.ifaddresses(interface)
- if netifaces.AF_INET in addrs.keys():
- if netifaces.AF_INET in filter_family:
- for addr in addrs[netifaces.AF_INET]:
- if prefix:
- # we need to manually assemble a list of IPv4 address/prefix
- prefix = '/' + \
- str(IPv4Network('0.0.0.0/' + addr['netmask']).prefixlen)
- list_addr.append(addr['addr'] + prefix)
- else:
- list_addr.append(addr['addr'])
- if netifaces.AF_INET6 in addrs.keys():
- if netifaces.AF_INET6 in filter_family:
- for addr in addrs[netifaces.AF_INET6]:
- if prefix:
- # we need to manually assemble a list of IPv4 address/prefix
- bits = bin(int(addr['netmask'].replace(':', '').split('/')[0], 16)).count('1')
- prefix = '/' + str(bits)
- list_addr.append(addr['addr'] + prefix)
- else:
- list_addr.append(addr['addr'])
-
- return list_addr
-
-def verify(upnpd):
- if not upnpd:
- return None
-
- if 'wan_interface' not in upnpd:
- raise ConfigError('To enable UPNP, you must have the "wan-interface" option!')
-
- if 'rule' in upnpd:
- for rule, rule_config in upnpd['rule'].items():
- for option in ['external_port_range', 'internal_port_range', 'ip', 'action']:
- if option not in rule_config:
- tmp = option.replace('_', '-')
- raise ConfigError(f'Every UPNP rule requires "{tmp}" to be set!')
-
- if 'stun' in upnpd:
- for option in ['host', 'port']:
- if option not in upnpd['stun']:
- raise ConfigError(f'A UPNP stun support must have an "{option}" option!')
-
- # Check the validity of the IP address
- listen_dev = []
- system_addrs_cidr = get_all_interface_addr(True, [], [netifaces.AF_INET, netifaces.AF_INET6])
- system_addrs = get_all_interface_addr(False, [], [netifaces.AF_INET, netifaces.AF_INET6])
- if 'listen' not in upnpd:
- raise ConfigError(f'Listen address or interface is required!')
- for listen_if_or_addr in upnpd['listen']:
- if listen_if_or_addr not in netifaces.interfaces():
- listen_dev.append(listen_if_or_addr)
- if (listen_if_or_addr not in system_addrs) and (listen_if_or_addr not in system_addrs_cidr) and \
- (listen_if_or_addr not in netifaces.interfaces()):
- if is_ipv4(listen_if_or_addr) and IPv4Network(listen_if_or_addr).is_multicast:
- raise ConfigError(f'The address "{listen_if_or_addr}" is an address that is not allowed'
- f'to listen on. It is not an interface address nor a multicast address!')
- if is_ipv6(listen_if_or_addr) and IPv6Network(listen_if_or_addr).is_multicast:
- raise ConfigError(f'The address "{listen_if_or_addr}" is an address that is not allowed'
- f'to listen on. It is not an interface address nor a multicast address!')
-
- system_listening_dev_addrs_cidr = get_all_interface_addr(True, listen_dev, [netifaces.AF_INET6])
- system_listening_dev_addrs = get_all_interface_addr(False, listen_dev, [netifaces.AF_INET6])
- for listen_if_or_addr in upnpd['listen']:
- if listen_if_or_addr not in netifaces.interfaces() and \
- (listen_if_or_addr not in system_listening_dev_addrs_cidr) and \
- (listen_if_or_addr not in system_listening_dev_addrs) and \
- is_ipv6(listen_if_or_addr) and \
- (not IPv6Network(listen_if_or_addr).is_multicast):
- raise ConfigError(f'{listen_if_or_addr} must listen on the interface of the network card')
-
-def generate(upnpd):
- if not upnpd:
- return None
-
- if os.path.isfile(config_file):
- os.unlink(config_file)
-
- render(config_file, 'firewall/upnpd.conf.j2', upnpd)
-
-def apply(upnpd):
- systemd_service_name = 'miniupnpd.service'
- if not upnpd:
- # Stop the UPNP service
- call(f'systemctl stop {systemd_service_name}')
- else:
- # Start the UPNP service
- call(f'systemctl restart {systemd_service_name}')
-
-if __name__ == '__main__':
- try:
- c = get_config()
- verify(c)
- generate(c)
- apply(c)
- except ConfigError as e:
- print(e)
- exit(1)
diff --git a/src/systemd/miniupnpd.service b/src/systemd/miniupnpd.service
deleted file mode 100644
index 51cb2eed8..000000000
--- a/src/systemd/miniupnpd.service
+++ /dev/null
@@ -1,13 +0,0 @@
-[Unit]
-Description=UPnP service
-ConditionPathExists=/run/upnp/miniupnp.conf
-After=vyos-router.service
-StartLimitIntervalSec=0
-
-[Service]
-WorkingDirectory=/run/upnp
-Type=simple
-ExecStart=/usr/sbin/miniupnpd -d -f /run/upnp/miniupnp.conf
-PrivateTmp=yes
-PIDFile=/run/miniupnpd.pid
-Restart=on-failure
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-21 20:08:25 +0000