diff options
Diffstat (limited to 'data/mibs/BGP4-MIB.txt')
| -rw-r--r-- | data/mibs/BGP4-MIB.txt | 929 |
1 files changed, 0 insertions, 929 deletions
diff --git a/data/mibs/BGP4-MIB.txt b/data/mibs/BGP4-MIB.txt deleted file mode 100644 index c911316c2..000000000 --- a/data/mibs/BGP4-MIB.txt +++ /dev/null @@ -1,929 +0,0 @@ - BGP4-MIB DEFINITIONS ::= BEGIN - - IMPORTS - MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, - IpAddress, Integer32, Counter32, Gauge32, mib-2 - FROM SNMPv2-SMI - MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP - FROM SNMPv2-CONF; - - bgp MODULE-IDENTITY - LAST-UPDATED "9902100000Z" - ORGANIZATION "IETF IDR Working Group" - CONTACT-INFO "E-mail: idr@merit.net - - Susan Hares (Editor) - Merit Network - 4251 Plymouth Road - Suite C - Ann Arbor, MI 48105-2785 - Tel: +1 734 936 2095 - Fax: +1 734 647 3185 - E-mail: skh@merit.edu - - Jeff Johnson (Editor) - RedBack Networks, Inc. - 1389 Moffett Park Drive - Sunnyvale, CA 94089-1134 - Tel: +1 408 548 3516 - Fax: +1 408 548 3599 - E-mail: jeff@redback.com" - DESCRIPTION - "The MIB module for BGP-4." - REVISION "9902100000Z" - DESCRIPTION - "Corrected duplicate OBJECT IDENTIFIER - assignment in the conformance information." - REVISION "9601080000Z" - DESCRIPTION - "1) Fixed the definitions of the traps to - make them equivalent to their initial - definition in RFC 1269. - 2) Added compliance and conformance info." - ::= { mib-2 15 } - - bgpVersion OBJECT-TYPE - SYNTAX OCTET STRING (SIZE (1..255)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Vector of supported BGP protocol version - numbers. Each peer negotiates the version - from this vector. Versions are identified - via the string of bits contained within this - object. The first octet contains bits 0 to - 7, the second octet contains bits 8 to 15, - and so on, with the most significant bit - referring to the lowest bit number in the - octet (e.g., the MSB of the first octet - refers to bit 0). If a bit, i, is present - and set, then the version (i+1) of the BGP - is supported." - ::= { bgp 1 } - - bgpLocalAs OBJECT-TYPE - SYNTAX INTEGER (0..65535) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The local autonomous system number." - ::= { bgp 2 } - - - - -- BGP Peer table. This table contains, one entry per BGP - -- peer, information about the BGP peer. - - bgpPeerTable OBJECT-TYPE - SYNTAX SEQUENCE OF BgpPeerEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "BGP peer table. This table contains, - one entry per BGP peer, information about the - connections with BGP peers." - ::= { bgp 3 } - - bgpPeerEntry OBJECT-TYPE - SYNTAX BgpPeerEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Entry containing information about the - connection with a BGP peer." - INDEX { bgpPeerRemoteAddr } - ::= { bgpPeerTable 1 } - - BgpPeerEntry ::= SEQUENCE { - bgpPeerIdentifier - IpAddress, - bgpPeerState - INTEGER, - bgpPeerAdminStatus - INTEGER, - bgpPeerNegotiatedVersion - Integer32, - bgpPeerLocalAddr - IpAddress, - bgpPeerLocalPort - INTEGER, - bgpPeerRemoteAddr - IpAddress, - bgpPeerRemotePort - INTEGER, - bgpPeerRemoteAs - INTEGER, - bgpPeerInUpdates - Counter32, - bgpPeerOutUpdates - Counter32, - bgpPeerInTotalMessages - Counter32, - bgpPeerOutTotalMessages - Counter32, - bgpPeerLastError - OCTET STRING, - bgpPeerFsmEstablishedTransitions - Counter32, - bgpPeerFsmEstablishedTime - Gauge32, - bgpPeerConnectRetryInterval - INTEGER, - bgpPeerHoldTime - INTEGER, - bgpPeerKeepAlive - INTEGER, - bgpPeerHoldTimeConfigured - INTEGER, - bgpPeerKeepAliveConfigured - INTEGER, - bgpPeerMinASOriginationInterval - INTEGER, - bgpPeerMinRouteAdvertisementInterval - INTEGER, - bgpPeerInUpdateElapsedTime - Gauge32 - } - - bgpPeerIdentifier OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The BGP Identifier of this entry's BGP peer." - ::= { bgpPeerEntry 1 } - - bgpPeerState OBJECT-TYPE - SYNTAX INTEGER { - idle(1), - connect(2), - active(3), - opensent(4), - openconfirm(5), - established(6) - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The BGP peer connection state." - ::= { bgpPeerEntry 2 } - - bgpPeerAdminStatus OBJECT-TYPE - SYNTAX INTEGER { - stop(1), - start(2) - } - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "The desired state of the BGP connection. A - transition from 'stop' to 'start' will cause - the BGP Start Event to be generated. A - transition from 'start' to 'stop' will cause - the BGP Stop Event to be generated. This - parameter can be used to restart BGP peer - connections. Care should be used in providing - write access to this object without adequate - authentication." - ::= { bgpPeerEntry 3 } - - bgpPeerNegotiatedVersion OBJECT-TYPE - SYNTAX Integer32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The negotiated version of BGP running between - the two peers." - ::= { bgpPeerEntry 4 } - - bgpPeerLocalAddr OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The local IP address of this entry's BGP - connection." - ::= { bgpPeerEntry 5 } - - bgpPeerLocalPort OBJECT-TYPE - SYNTAX INTEGER (0..65535) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The local port for the TCP connection between - the BGP peers." - ::= { bgpPeerEntry 6 } - - bgpPeerRemoteAddr OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The remote IP address of this entry's BGP - peer." - ::= { bgpPeerEntry 7 } - - bgpPeerRemotePort OBJECT-TYPE - SYNTAX INTEGER (0..65535) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The remote port for the TCP connection between - the BGP peers. Note that the objects - bgpPeerLocalAddr, bgpPeerLocalPort, - bgpPeerRemoteAddr and bgpPeerRemotePort - provide the appropriate reference to the - standard MIB TCP connection table." - ::= { bgpPeerEntry 8 } - - bgpPeerRemoteAs OBJECT-TYPE - SYNTAX INTEGER (0..65535) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The remote autonomous system number." - ::= { bgpPeerEntry 9 } - - bgpPeerInUpdates OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of BGP UPDATE messages received on - this connection. This object should be - initialized to zero (0) when the connection is - established." - ::= { bgpPeerEntry 10 } - - bgpPeerOutUpdates OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of BGP UPDATE messages transmitted - on this connection. This object should be - initialized to zero (0) when the connection is - established." - ::= { bgpPeerEntry 11 } - - bgpPeerInTotalMessages OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The total number of messages received from the - remote peer on this connection. This object - should be initialized to zero when the - connection is established." - ::= { bgpPeerEntry 12 } - - bgpPeerOutTotalMessages OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The total number of messages transmitted to - the remote peer on this connection. This object - should be initialized to zero when the - connection is established." - ::= { bgpPeerEntry 13 } - - bgpPeerLastError OBJECT-TYPE - SYNTAX OCTET STRING (SIZE (2)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The last error code and subcode seen by this - peer on this connection. If no error has - occurred, this field is zero. Otherwise, the - first byte of this two byte OCTET STRING - contains the error code, and the second byte - contains the subcode." - ::= { bgpPeerEntry 14 } - - bgpPeerFsmEstablishedTransitions OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The total number of times the BGP FSM - transitioned into the established state." - ::= { bgpPeerEntry 15 } - - bgpPeerFsmEstablishedTime OBJECT-TYPE - SYNTAX Gauge32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This timer indicates how long (in seconds) this - peer has been in the Established state or how long - since this peer was last in the Established state. - It is set to zero when a new peer is configured or - the router is booted." - ::= { bgpPeerEntry 16 } - - bgpPeerConnectRetryInterval OBJECT-TYPE - SYNTAX INTEGER (1..65535) - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "Time interval in seconds for the ConnectRetry - timer. The suggested value for this timer is - 120 seconds." - ::= { bgpPeerEntry 17 } - - bgpPeerHoldTime OBJECT-TYPE - SYNTAX INTEGER ( 0 | 3..65535 ) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Time interval in seconds for the Hold Timer - established with the peer. The value of this - object is calculated by this BGP speaker by - using the smaller of the value in - bgpPeerHoldTimeConfigured and the Hold Time - received in the OPEN message. This value - must be at lease three seconds if it is not - zero (0) in which case the Hold Timer has - not been established with the peer, or, the - value of bgpPeerHoldTimeConfigured is zero (0)." - ::= { bgpPeerEntry 18 } - - bgpPeerKeepAlive OBJECT-TYPE - SYNTAX INTEGER ( 0 | 1..21845 ) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Time interval in seconds for the KeepAlive - timer established with the peer. The value of - this object is calculated by this BGP speaker - such that, when compared with bgpPeerHoldTime, - it has the same proportion as what - bgpPeerKeepAliveConfigured has when compared - with bgpPeerHoldTimeConfigured. If the value - of this object is zero (0), it indicates that - the KeepAlive timer has not been established - with the peer, or, the value of - bgpPeerKeepAliveConfigured is zero (0)." - ::= { bgpPeerEntry 19 } - - bgpPeerHoldTimeConfigured OBJECT-TYPE - SYNTAX INTEGER ( 0 | 3..65535 ) - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "Time interval in seconds for the Hold Time - configured for this BGP speaker with this peer. - This value is placed in an OPEN message sent to - this peer by this BGP speaker, and is compared - with the Hold Time field in an OPEN message - received from the peer when determining the Hold - Time (bgpPeerHoldTime) with the peer. This value - must not be less than three seconds if it is not - zero (0) in which case the Hold Time is NOT to be - established with the peer. The suggested value for - this timer is 90 seconds." - ::= { bgpPeerEntry 20 } - - bgpPeerKeepAliveConfigured OBJECT-TYPE - SYNTAX INTEGER ( 0 | 1..21845 ) - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "Time interval in seconds for the KeepAlive timer - configured for this BGP speaker with this peer. - The value of this object will only determine the - KEEPALIVE messages' frequency relative to the value - specified in bgpPeerHoldTimeConfigured; the actual - time interval for the KEEPALIVE messages is - indicated by bgpPeerKeepAlive. A reasonable - maximum value for this timer would be configured to - be one third of that of bgpPeerHoldTimeConfigured. - If the value of this object is zero (0), no - periodical KEEPALIVE messages are sent to the peer - after the BGP connection has been established. The - suggested value for this timer is 30 seconds." - ::= { bgpPeerEntry 21 } - - bgpPeerMinASOriginationInterval OBJECT-TYPE - SYNTAX INTEGER (1..65535) - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "Time interval in seconds for the - MinASOriginationInterval timer. - The suggested value for this timer is 15 seconds." - ::= { bgpPeerEntry 22 } - - bgpPeerMinRouteAdvertisementInterval OBJECT-TYPE - SYNTAX INTEGER (1..65535) - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "Time interval in seconds for the - MinRouteAdvertisementInterval timer. - The suggested value for this timer is 30 seconds." - ::= { bgpPeerEntry 23 } - - bgpPeerInUpdateElapsedTime OBJECT-TYPE - SYNTAX Gauge32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Elapsed time in seconds since the last BGP - UPDATE message was received from the peer. - Each time bgpPeerInUpdates is incremented, - the value of this object is set to zero (0)." - ::= { bgpPeerEntry 24 } - - - - bgpIdentifier OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The BGP Identifier of local system." - ::= { bgp 4 } - - - - -- Received Path Attribute Table. This table contains, - -- one entry per path to a network, path attributes - -- received from all peers running BGP version 3 or less. - -- This table is obsolete, having been replaced in - -- functionality with the bgp4PathAttrTable. - - bgpRcvdPathAttrTable OBJECT-TYPE - SYNTAX SEQUENCE OF BgpPathAttrEntry - MAX-ACCESS not-accessible - STATUS obsolete - DESCRIPTION - "The BGP Received Path Attribute Table contains - information about paths to destination networks - received from all peers running BGP version 3 or - less." - ::= { bgp 5 } - - bgpPathAttrEntry OBJECT-TYPE - SYNTAX BgpPathAttrEntry - MAX-ACCESS not-accessible - STATUS obsolete - DESCRIPTION - "Information about a path to a network." - INDEX { bgpPathAttrDestNetwork, - bgpPathAttrPeer } - ::= { bgpRcvdPathAttrTable 1 } - - BgpPathAttrEntry ::= SEQUENCE { - bgpPathAttrPeer - IpAddress, - bgpPathAttrDestNetwork - IpAddress, - bgpPathAttrOrigin - INTEGER, - bgpPathAttrASPath - OCTET STRING, - bgpPathAttrNextHop - IpAddress, - bgpPathAttrInterASMetric - Integer32 - } - - bgpPathAttrPeer OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS read-only - STATUS obsolete - DESCRIPTION - "The IP address of the peer where the path - information was learned." - ::= { bgpPathAttrEntry 1 } - - bgpPathAttrDestNetwork OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS read-only - STATUS obsolete - DESCRIPTION - "The address of the destination network." - ::= { bgpPathAttrEntry 2 } - - bgpPathAttrOrigin OBJECT-TYPE - SYNTAX INTEGER { - igp(1),-- networks are interior - egp(2),-- networks learned via EGP - incomplete(3) -- undetermined - } - MAX-ACCESS read-only - STATUS obsolete - DESCRIPTION - "The ultimate origin of the path information." - ::= { bgpPathAttrEntry 3 } - - bgpPathAttrASPath OBJECT-TYPE - SYNTAX OCTET STRING (SIZE (2..255)) - MAX-ACCESS read-only - STATUS obsolete - DESCRIPTION - "The set of ASs that must be traversed to reach - the network. This object is probably best - represented as SEQUENCE OF INTEGER. For SMI - compatibility, though, it is represented as - OCTET STRING. Each AS is represented as a pair - of octets according to the following algorithm: - - first-byte-of-pair = ASNumber / 256; - second-byte-of-pair = ASNumber & 255;" - ::= { bgpPathAttrEntry 4 } - - bgpPathAttrNextHop OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS read-only - STATUS obsolete - DESCRIPTION - "The address of the border router that should - be used for the destination network." - ::= { bgpPathAttrEntry 5 } - - bgpPathAttrInterASMetric OBJECT-TYPE - SYNTAX Integer32 - MAX-ACCESS read-only - STATUS obsolete - DESCRIPTION - "The optional inter-AS metric. If this - attribute has not been provided for this route, - the value for this object is 0." - ::= { bgpPathAttrEntry 6 } - - - - -- BGP-4 Received Path Attribute Table. This table contains, - -- one entry per path to a network, path attributes - -- received from all peers running BGP-4. - - bgp4PathAttrTable OBJECT-TYPE - SYNTAX SEQUENCE OF Bgp4PathAttrEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The BGP-4 Received Path Attribute Table contains - information about paths to destination networks - received from all BGP4 peers." - ::= { bgp 6 } - - bgp4PathAttrEntry OBJECT-TYPE - SYNTAX Bgp4PathAttrEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Information about a path to a network." - INDEX { bgp4PathAttrIpAddrPrefix, - bgp4PathAttrIpAddrPrefixLen, - bgp4PathAttrPeer } - ::= { bgp4PathAttrTable 1 } - - Bgp4PathAttrEntry ::= SEQUENCE { - bgp4PathAttrPeer - IpAddress, - bgp4PathAttrIpAddrPrefixLen - INTEGER, - bgp4PathAttrIpAddrPrefix - IpAddress, - bgp4PathAttrOrigin - INTEGER, - bgp4PathAttrASPathSegment - OCTET STRING, - bgp4PathAttrNextHop - IpAddress, - bgp4PathAttrMultiExitDisc - INTEGER, - bgp4PathAttrLocalPref - INTEGER, - bgp4PathAttrAtomicAggregate - INTEGER, - bgp4PathAttrAggregatorAS - INTEGER, - bgp4PathAttrAggregatorAddr - IpAddress, - bgp4PathAttrCalcLocalPref - INTEGER, - bgp4PathAttrBest - INTEGER, - bgp4PathAttrUnknown - OCTET STRING - } - - bgp4PathAttrPeer OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The IP address of the peer where the path - information was learned." - ::= { bgp4PathAttrEntry 1 } - bgp4PathAttrIpAddrPrefixLen OBJECT-TYPE - SYNTAX INTEGER (0..32) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Length in bits of the IP address prefix in the - Network Layer Reachability Information field." - ::= { bgp4PathAttrEntry 2 } - - bgp4PathAttrIpAddrPrefix OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "An IP address prefix in the Network Layer - Reachability Information field. This object - is an IP address containing the prefix with - length specified by bgp4PathAttrIpAddrPrefixLen. - Any bits beyond the length specified by - bgp4PathAttrIpAddrPrefixLen are zeroed." - ::= { bgp4PathAttrEntry 3 } - - bgp4PathAttrOrigin OBJECT-TYPE - SYNTAX INTEGER { - igp(1),-- networks are interior - egp(2),-- networks learned via EGP - incomplete(3) -- undetermined - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The ultimate origin of the path information." - ::= { bgp4PathAttrEntry 4 } - - bgp4PathAttrASPathSegment OBJECT-TYPE - SYNTAX OCTET STRING (SIZE (2..255)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The sequence of AS path segments. Each AS - path segment is represented by a triple - <type, length, value>. - - The type is a 1-octet field which has two - possible values: - 1 AS_SET: unordered set of ASs a - route in the UPDATE message - has traversed - 2 AS_SEQUENCE: ordered set of ASs - a route in the UPDATE message - has traversed. - - The length is a 1-octet field containing the - number of ASs in the value field. - - The value field contains one or more AS - numbers, each AS is represented in the octet - string as a pair of octets according to the - following algorithm: - - first-byte-of-pair = ASNumber / 256; - second-byte-of-pair = ASNumber & 255;" - ::= { bgp4PathAttrEntry 5 } - - bgp4PathAttrNextHop OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The address of the border router that should - be used for the destination network." - ::= { bgp4PathAttrEntry 6 } - - bgp4PathAttrMultiExitDisc OBJECT-TYPE - SYNTAX INTEGER (-1..2147483647) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This metric is used to discriminate between - multiple exit points to an adjacent autonomous - system. A value of -1 indicates the absence of - this attribute." - ::= { bgp4PathAttrEntry 7 } - - bgp4PathAttrLocalPref OBJECT-TYPE - SYNTAX INTEGER (-1..2147483647) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The originating BGP4 speaker's degree of - preference for an advertised route. A value of - -1 indicates the absence of this attribute." - ::= { bgp4PathAttrEntry 8 } - - bgp4PathAttrAtomicAggregate OBJECT-TYPE - SYNTAX INTEGER { - lessSpecificRrouteNotSelected(1), - lessSpecificRouteSelected(2) - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Whether or not a system has selected - a less specific route without selecting a - more specific route." - ::= { bgp4PathAttrEntry 9 } - - bgp4PathAttrAggregatorAS OBJECT-TYPE - SYNTAX INTEGER (0..65535) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The AS number of the last BGP4 speaker that - performed route aggregation. A value of zero (0) - indicates the absence of this attribute." - ::= { bgp4PathAttrEntry 10 } - - bgp4PathAttrAggregatorAddr OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The IP address of the last BGP4 speaker that - performed route aggregation. A value of - 0.0.0.0 indicates the absence of this attribute." - ::= { bgp4PathAttrEntry 11 } - - bgp4PathAttrCalcLocalPref OBJECT-TYPE - SYNTAX INTEGER (-1..2147483647) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The degree of preference calculated by the - receiving BGP4 speaker for an advertised route. - A value of -1 indicates the absence of this - attribute." - ::= { bgp4PathAttrEntry 12 } - - bgp4PathAttrBest OBJECT-TYPE - SYNTAX INTEGER { - false(1),-- not chosen as best route - true(2) -- chosen as best route - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "An indication of whether or not this route - was chosen as the best BGP4 route." - ::= { bgp4PathAttrEntry 13 } - - bgp4PathAttrUnknown OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..255)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "One or more path attributes not understood - by this BGP4 speaker. Size zero (0) indicates - the absence of such attribute(s). Octets - beyond the maximum size, if any, are not - recorded by this object." - ::= { bgp4PathAttrEntry 14 } - - - -- Traps. - - -- note that in RFC 1657, bgpTraps was incorrectly - -- assigned a value of { bgp 7 }, and each of the - -- traps had the bgpPeerRemoteAddr object inappropriately - -- removed from their OBJECTS clause. The following - -- definitions restore the semantics of the traps as - -- they were initially defined in RFC 1269. - - -- { bgp 7 } is unused - - bgpTraps OBJECT IDENTIFIER ::= { bgp 0 } - - bgpEstablished NOTIFICATION-TYPE - OBJECTS { bgpPeerRemoteAddr, - bgpPeerLastError, - bgpPeerState } - STATUS current - DESCRIPTION - "The BGP Established event is generated when - the BGP FSM enters the ESTABLISHED state." - ::= { bgpTraps 1 } - - bgpBackwardTransition NOTIFICATION-TYPE - OBJECTS { bgpPeerRemoteAddr, - bgpPeerLastError, - bgpPeerState } - STATUS current - DESCRIPTION - "The BGPBackwardTransition Event is generated - when the BGP FSM moves from a higher numbered - state to a lower numbered state." - ::= { bgpTraps 2 } - - -- conformance information - - bgpMIBConformance OBJECT IDENTIFIER ::= { bgp 8 } - bgpMIBCompliances OBJECT IDENTIFIER ::= { bgpMIBConformance 1 } - bgpMIBGroups OBJECT IDENTIFIER ::= { bgpMIBConformance 2 } - - -- compliance statements - - bgpMIBCompliance MODULE-COMPLIANCE - STATUS current - DESCRIPTION - "The compliance statement for entities which - implement the BGP4 mib." - MODULE -- this module - MANDATORY-GROUPS { bgp4MIBGlobalsGroup, - bgp4MIBPeerGroup, - bgp4MIBPathAttrGroup, - bgp4MIBNotificationGroup } - ::= { bgpMIBCompliances 1 } - - -- units of conformance - - bgp4MIBGlobalsGroup OBJECT-GROUP - OBJECTS { bgpVersion, - bgpLocalAs, - bgpIdentifier } - STATUS current - DESCRIPTION - "A collection of objects providing information - on global BGP state." - ::= { bgpMIBGroups 1 } - - bgp4MIBPeerGroup OBJECT-GROUP - OBJECTS { bgpPeerIdentifier, - bgpPeerState, - bgpPeerAdminStatus, - bgpPeerNegotiatedVersion, - bgpPeerLocalAddr, - bgpPeerLocalPort, - bgpPeerRemoteAddr, - bgpPeerRemotePort, - bgpPeerRemoteAs, - bgpPeerInUpdates, - bgpPeerOutUpdates, - bgpPeerInTotalMessages, - bgpPeerOutTotalMessages, - bgpPeerLastError, - bgpPeerFsmEstablishedTransitions, - bgpPeerFsmEstablishedTime, - bgpPeerConnectRetryInterval, - bgpPeerHoldTime, - bgpPeerKeepAlive, - bgpPeerHoldTimeConfigured, - bgpPeerKeepAliveConfigured, - bgpPeerMinASOriginationInterval, - bgpPeerMinRouteAdvertisementInterval, - bgpPeerInUpdateElapsedTime } - STATUS current - DESCRIPTION - "A collection of objects for managing - BGP peers." - ::= { bgpMIBGroups 2 } - - bgp4MIBRcvdPathAttrGroup OBJECT-GROUP - OBJECTS { bgpPathAttrPeer, - bgpPathAttrDestNetwork, - bgpPathAttrOrigin, - bgpPathAttrASPath, - bgpPathAttrNextHop, - bgpPathAttrInterASMetric } - STATUS obsolete - DESCRIPTION - "A collection of objects for managing BGP - path entries. - - This conformance group is obsolete, - replaced by bgp4MIBPathAttrGroup." - ::= { bgpMIBGroups 3 } - - bgp4MIBPathAttrGroup OBJECT-GROUP - OBJECTS { bgp4PathAttrPeer, - bgp4PathAttrIpAddrPrefixLen, - bgp4PathAttrIpAddrPrefix, - bgp4PathAttrOrigin, - bgp4PathAttrASPathSegment, - bgp4PathAttrNextHop, - bgp4PathAttrMultiExitDisc, - bgp4PathAttrLocalPref, - bgp4PathAttrAtomicAggregate, - bgp4PathAttrAggregatorAS, - bgp4PathAttrAggregatorAddr, - bgp4PathAttrCalcLocalPref, - bgp4PathAttrBest, - bgp4PathAttrUnknown } - STATUS current - DESCRIPTION - "A collection of objects for managing - BGP path entries." - ::= { bgpMIBGroups 4 } - - bgp4MIBNotificationGroup NOTIFICATION-GROUP - NOTIFICATIONS { bgpEstablished, - bgpBackwardTransition } - STATUS current - DESCRIPTION - "A collection of notifications for signaling - changes in BGP peer relationships." - ::= { bgpMIBGroups 5 } - - END |