diff options
Diffstat (limited to 'data/mibs/DISMAN-PING-MIB.txt')
| -rw-r--r-- | data/mibs/DISMAN-PING-MIB.txt | 1561 |
1 files changed, 0 insertions, 1561 deletions
diff --git a/data/mibs/DISMAN-PING-MIB.txt b/data/mibs/DISMAN-PING-MIB.txt deleted file mode 100644 index 645ff8c7d..000000000 --- a/data/mibs/DISMAN-PING-MIB.txt +++ /dev/null @@ -1,1561 +0,0 @@ -DISMAN-PING-MIB DEFINITIONS ::= BEGIN - -IMPORTS - MODULE-IDENTITY, OBJECT-TYPE, Integer32, - Unsigned32, Gauge32, mib-2, - NOTIFICATION-TYPE, OBJECT-IDENTITY - FROM SNMPv2-SMI -- RFC2578 - TEXTUAL-CONVENTION, RowStatus, - StorageType, DateAndTime, TruthValue - FROM SNMPv2-TC -- RFC2579 - MODULE-COMPLIANCE, OBJECT-GROUP, - NOTIFICATION-GROUP - FROM SNMPv2-CONF -- RFC2580 - InterfaceIndexOrZero -- RFC2863 - FROM IF-MIB - SnmpAdminString - FROM SNMP-FRAMEWORK-MIB -- RFC3411 - InetAddressType, InetAddress - FROM INET-ADDRESS-MIB; -- RFC4001 - - pingMIB MODULE-IDENTITY - LAST-UPDATED "200606130000Z" -- 13 June 2006 - ORGANIZATION "IETF Distributed Management Working Group" - CONTACT-INFO - "Juergen Quittek - - NEC Europe Ltd. - Network Laboratories - Kurfuersten-Anlage 36 - 69115 Heidelberg - Germany - - Phone: +49 6221 4342-115 - - Email: quittek@netlab.nec.de" - DESCRIPTION - "The Ping MIB (DISMAN-PING-MIB) provides the capability of - controlling the use of the ping function at a remote - host. - - Copyright (C) The Internet Society (2006). This version of - this MIB module is part of RFC 4560; see the RFC itself for - full legal notices." - - -- Revision history - - REVISION "200606130000Z" -- 13 June 2006 - DESCRIPTION - "Updated version, published as RFC 4560. - - Correctly considered IPv6 in DESCRIPTION - clause of pingCtlDataSize - - Replaced references to RFC 2575 by RFC 3415 - - Replaced references to RFC 2571 by RFC 3411 - - Replaced references to RFC 2851 by RFC 4001 - - Added DEFVAL { {} } to definition of - pingCtlTrapGeneration - - Changed DEFVAL of object pingCtlDescr from - DEFVAL { '00'H } to DEFVAL { ''H } - - Changed DEFVAL of object pingCtlSourceAddressType - from DEFVAL { ipv4 } to DEFVAL { unknown } - - Extended DESCRIPTION clause of pingResultsTable - describing re-initialization of entries - - Changed SYNTAX of pingResultsProbeResponses and - pingResultsSentProbes from Unsigned32 to Gauge32 - - Changed status of pingCompliance to deprecated - - Added pingFullCompliance and pingMinimumCompliance - - Changed status of pingGroup and pingTimeStampGroup - to deprecated - - Added pingMinimumGroup, pingCtlRowStatusGroup, - and pingHistoryGroup" - - REVISION "200009210000Z" -- 21 September 2000 - DESCRIPTION - "Initial version, published as RFC 2925." - ::= { mib-2 80 } - - -- Textual Conventions - - OperationResponseStatus ::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION - "Used to report the result of an operation: - - responseReceived(1) - Operation is completed successfully. - unknown(2) - Operation failed due to unknown error. - internalError(3) - An implementation detected an error - in its own processing that caused an operation - to fail. - requestTimedOut(4) - Operation failed to receive a - valid reply within the time limit imposed on it. - unknownDestinationAddress(5) - Invalid destination - address. - noRouteToTarget(6) - Could not find a route to target. - interfaceInactiveToTarget(7) - The interface to be - used in sending a probe is inactive, and an - alternate route does not exist. - arpFailure(8) - Unable to resolve a target address to a - media-specific address. - maxConcurrentLimitReached(9) - The maximum number of - concurrent active operations would have been exceeded - if the corresponding operation was allowed. - unableToResolveDnsName(10) - The DNS name specified was - unable to be mapped to an IP address. - invalidHostAddress(11) - The IP address for a host - has been determined to be invalid. Examples of this - are broadcast or multicast addresses." - SYNTAX INTEGER { - responseReceived(1), - unknown(2), - internalError(3), - requestTimedOut(4), - unknownDestinationAddress(5), - noRouteToTarget(6), - interfaceInactiveToTarget(7), - arpFailure(8), - maxConcurrentLimitReached(9), - unableToResolveDnsName(10), - invalidHostAddress(11) - } - - -- Top level structure of the MIB - - pingNotifications OBJECT IDENTIFIER ::= { pingMIB 0 } - pingObjects OBJECT IDENTIFIER ::= { pingMIB 1 } - pingConformance OBJECT IDENTIFIER ::= { pingMIB 2 } - - -- The registration node (point) for ping implementation types - - pingImplementationTypeDomains OBJECT IDENTIFIER ::= { pingMIB 3 } - - pingIcmpEcho OBJECT-IDENTITY - STATUS current - DESCRIPTION - "Indicates that an implementation is using the Internet - Control Message Protocol (ICMP) 'ECHO' facility." - ::= { pingImplementationTypeDomains 1 } - - pingUdpEcho OBJECT-IDENTITY - STATUS current - DESCRIPTION - "Indicates that an implementation is using the UDP echo - port (7)." - REFERENCE - "RFC 862, 'Echo Protocol'." - ::= { pingImplementationTypeDomains 2 } - - pingSnmpQuery OBJECT-IDENTITY - STATUS current - DESCRIPTION - "Indicates that an implementation is using an SNMP query - to calculate a round trip time." - ::= { pingImplementationTypeDomains 3 } - - pingTcpConnectionAttempt OBJECT-IDENTITY - STATUS current - DESCRIPTION - "Indicates that an implementation is attempting to - connect to a TCP port in order to calculate a round - trip time." - ::= { pingImplementationTypeDomains 4 } - - -- Simple Object Definitions - - pingMaxConcurrentRequests OBJECT-TYPE - SYNTAX Unsigned32 - UNITS "requests" - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "The maximum number of concurrent active ping requests - that are allowed within an agent implementation. A value - of 0 for this object implies that there is no limit for - the number of concurrent active requests in effect. - - The limit applies only to new requests being activated. - When a new value is set, the agent will continue processing - all the requests already active, even if their number - exceeds the limit just imposed." - DEFVAL { 10 } - ::= { pingObjects 1 } - - -- Ping Control Table - - pingCtlTable OBJECT-TYPE - SYNTAX SEQUENCE OF PingCtlEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Defines the ping Control Table for providing, via SNMP, - the capability of performing ping operations at - a remote host. The results of these operations are - stored in the pingResultsTable and the - pingProbeHistoryTable." - ::= { pingObjects 2 } - - pingCtlEntry OBJECT-TYPE - SYNTAX PingCtlEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Defines an entry in the pingCtlTable. The first index - element, pingCtlOwnerIndex, is of type SnmpAdminString, - a textual convention that allows for use of the SNMPv3 - View-Based Access Control Model (RFC 3415, VACM) - and that allows a management application to identify its - entries. The second index, pingCtlTestName (also an - SnmpAdminString), enables the same management - application to have multiple outstanding requests." - INDEX { - pingCtlOwnerIndex, - pingCtlTestName - } - ::= { pingCtlTable 1 } - - PingCtlEntry ::= - SEQUENCE { - pingCtlOwnerIndex SnmpAdminString, - pingCtlTestName SnmpAdminString, - pingCtlTargetAddressType InetAddressType, - pingCtlTargetAddress InetAddress, - pingCtlDataSize Unsigned32, - pingCtlTimeOut Unsigned32, - pingCtlProbeCount Unsigned32, - pingCtlAdminStatus INTEGER, - pingCtlDataFill OCTET STRING, - pingCtlFrequency Unsigned32, - pingCtlMaxRows Unsigned32, - pingCtlStorageType StorageType, - pingCtlTrapGeneration BITS, - pingCtlTrapProbeFailureFilter Unsigned32, - pingCtlTrapTestFailureFilter Unsigned32, - pingCtlType OBJECT IDENTIFIER, - pingCtlDescr SnmpAdminString, - pingCtlSourceAddressType InetAddressType, - pingCtlSourceAddress InetAddress, - pingCtlIfIndex InterfaceIndexOrZero, - pingCtlByPassRouteTable TruthValue, - pingCtlDSField Unsigned32, - pingCtlRowStatus RowStatus - } - - pingCtlOwnerIndex OBJECT-TYPE - SYNTAX SnmpAdminString (SIZE(0..32)) - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "To facilitate the provisioning of access control by a - security administrator using the View-Based Access - Control Model (RFC 2575, VACM) for tables in which - multiple users may need to create or - modify entries independently, the initial index is used - as an 'owner index'. Such an initial index has a syntax - of SnmpAdminString and can thus be trivially mapped to a - securityName or groupName defined in VACM, in - accordance with a security policy. - - When used in conjunction with such a security policy, all - entries in the table belonging to a particular user (or - group) will have the same value for this initial index. - For a given user's entries in a particular table, the - object identifiers for the information in these entries - will have the same subidentifiers (except for the 'column' - subidentifier) up to the end of the encoded owner index. - To configure VACM to permit access to this portion of the - table, one would create vacmViewTreeFamilyTable entries - with the value of vacmViewTreeFamilySubtree including - the owner index portion, and vacmViewTreeFamilyMask - 'wildcarding' the column subidentifier. More elaborate - configurations are possible." - ::= { pingCtlEntry 1 } - - pingCtlTestName OBJECT-TYPE - SYNTAX SnmpAdminString (SIZE(0..32)) - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The name of the ping test. This is locally unique, within - the scope of a pingCtlOwnerIndex." - ::= { pingCtlEntry 2 } - - pingCtlTargetAddressType OBJECT-TYPE - SYNTAX InetAddressType - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "Specifies the type of host address to be used at a remote - host for performing a ping operation." - DEFVAL { unknown } - ::= { pingCtlEntry 3 } - - pingCtlTargetAddress OBJECT-TYPE - SYNTAX InetAddress - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "Specifies the host address to be used at a remote host for - performing a ping operation. The host address type is - determined by the value of the corresponding - pingCtlTargetAddressType. - - A value for this object MUST be set prior to transitioning - its corresponding pingCtlEntry to active(1) via - pingCtlRowStatus." - DEFVAL { ''H } - ::= { pingCtlEntry 4 } - - pingCtlDataSize OBJECT-TYPE - SYNTAX Unsigned32 (0..65507) - UNITS "octets" - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "Specifies the size of the data portion to be - transmitted in a ping operation, in octets. Whether this - value can be applied depends on the selected - implementation method for performing a ping operation, - indicated by pingCtlType in the same conceptual row. - If the method used allows applying the value contained - - in this object, then it MUST be applied. If the specified - size is not appropriate for the chosen ping method, the - implementation SHOULD use whatever size (appropriate to - the method) is closest to the specified size. - - The maximum value for this object was computed by - subtracting the smallest possible IP header size of - 20 octets (IPv4 header with no options) and the UDP - header size of 8 octets from the maximum IP packet size. - An IP packet has a maximum size of 65535 octets - (excluding IPv6 Jumbograms)." - DEFVAL { 0 } - ::= { pingCtlEntry 5 } - - pingCtlTimeOut OBJECT-TYPE - SYNTAX Unsigned32 (1..60) - UNITS "seconds" - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "Specifies the time-out value, in seconds, for a - remote ping operation." - DEFVAL { 3 } - ::= { pingCtlEntry 6 } - - pingCtlProbeCount OBJECT-TYPE - SYNTAX Unsigned32 (1..15) - UNITS "probes" - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "Specifies the number of times to perform a ping - operation at a remote host as part of a single ping test." - DEFVAL { 1 } - ::= { pingCtlEntry 7 } - - pingCtlAdminStatus OBJECT-TYPE - SYNTAX INTEGER { - enabled(1), -- test should be started - disabled(2) -- test should be stopped - } - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "Reflects the desired state that a pingCtlEntry should be - in: - - enabled(1) - Attempt to activate the test as defined by - this pingCtlEntry. - disabled(2) - Deactivate the test as defined by this - pingCtlEntry. - - Refer to the corresponding pingResultsOperStatus to - determine the operational state of the test defined by - this entry." - DEFVAL { disabled } - ::= { pingCtlEntry 8 } - - pingCtlDataFill OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..1024)) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The content of this object is used together with the - corresponding pingCtlDataSize value to determine how to - fill the data portion of a probe packet. The option of - selecting a data fill pattern can be useful when links - are compressed or have data pattern sensitivities. The - contents of pingCtlDataFill should be repeated in a ping - packet when the size of the data portion of the ping - packet is greater than the size of pingCtlDataFill." - DEFVAL { '00'H } - ::= { pingCtlEntry 9 } - - pingCtlFrequency OBJECT-TYPE - SYNTAX Unsigned32 - UNITS "seconds" - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The number of seconds to wait before repeating a ping test - as defined by the value of the various objects in the - corresponding row. - - A single ping test consists of a series of ping probes. - The number of probes is determined by the value of the - corresponding pingCtlProbeCount object. After a single - test is completed the number of seconds as defined by the - value of pingCtlFrequency MUST elapse before the - next ping test is started. - - A value of 0 for this object implies that the test - as defined by the corresponding entry will not be - repeated." - DEFVAL { 0 } - ::= { pingCtlEntry 10 } - - pingCtlMaxRows OBJECT-TYPE - SYNTAX Unsigned32 - UNITS "rows" - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The maximum number of corresponding entries allowed - in the pingProbeHistoryTable. An implementation of this - MIB will remove the oldest corresponding entry in the - pingProbeHistoryTable to allow the addition of an - new entry once the number of corresponding rows in the - pingProbeHistoryTable reaches this value. - - Old entries are not removed when a new test is - started. Entries are added to the pingProbeHistoryTable - until pingCtlMaxRows is reached before entries begin to - be removed. - - A value of 0 for this object disables creation of - pingProbeHistoryTable entries." - DEFVAL { 50 } - ::= { pingCtlEntry 11 } - - pingCtlStorageType OBJECT-TYPE - SYNTAX StorageType - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The storage type for this conceptual row. - Conceptual rows having the value 'permanent' need not - allow write-access to any columnar objects in the row." - DEFVAL { nonVolatile } - ::= { pingCtlEntry 12 } - - pingCtlTrapGeneration OBJECT-TYPE - SYNTAX BITS { - probeFailure(0), - testFailure(1), - testCompletion(2) - } - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The value of this object determines when and whether - to generate a notification for this entry: - - probeFailure(0) - Generate a pingProbeFailed - notification subject to the value of - pingCtlTrapProbeFailureFilter. The object - pingCtlTrapProbeFailureFilter can be used - to specify the number of consecutive probe - failures that are required before a - pingProbeFailed notification can be generated. - testFailure(1) - Generate a pingTestFailed - notification. In this instance the object - pingCtlTrapTestFailureFilter can be used to - determine the number of probe failures that - signal when a test fails. - testCompletion(2) - Generate a pingTestCompleted - notification. - - By default, no bits are set, indicating that - none of the above options is selected." - DEFVAL { {} } -- no bits set. - ::= { pingCtlEntry 13 } - - pingCtlTrapProbeFailureFilter OBJECT-TYPE - SYNTAX Unsigned32 (0..15) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The value of this object is used to determine when - to generate a pingProbeFailed NOTIFICATION. - - Setting BIT probeFailure(0) of object - pingCtlTrapGeneration to '1' implies that a - pingProbeFailed NOTIFICATION is generated only when - - a number of consecutive ping probes equal to the - value of pingCtlTrapProbeFailureFilter fail within - a given ping test. After triggering the notification, - the probe failure counter is reset to zero." - DEFVAL { 1 } - ::= { pingCtlEntry 14 } - - pingCtlTrapTestFailureFilter OBJECT-TYPE - SYNTAX Unsigned32 (0..15) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The value of this object is used to determine when - to generate a pingTestFailed NOTIFICATION. - - Setting BIT testFailure(1) of object - - pingCtlTrapGeneration to '1' implies that a - pingTestFailed NOTIFICATION is generated only when - a number of consecutive ping tests equal to the - value of pingCtlTrapProbeFailureFilter fail. - After triggering the notification, the test failure - counter is reset to zero." - DEFVAL { 1 } - ::= { pingCtlEntry 15 } - - pingCtlType OBJECT-TYPE - SYNTAX OBJECT IDENTIFIER - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The value of this object is used either to report or - to select the implementation method to be used for - calculating a ping response time. The value of this - object MAY be selected from pingImplementationTypeDomains. - - Additional implementation types SHOULD be allocated as - required by implementers of the DISMAN-PING-MIB under - their enterprise-specific registration point and not - beneath pingImplementationTypeDomains." - DEFVAL { pingIcmpEcho } - ::= { pingCtlEntry 16 } - - pingCtlDescr OBJECT-TYPE - SYNTAX SnmpAdminString - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The purpose of this object is to provide a - descriptive name of the remote ping test." - DEFVAL { ''H } - ::= { pingCtlEntry 17 } - - pingCtlSourceAddressType OBJECT-TYPE - SYNTAX InetAddressType - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "Specifies the type of the source address, - pingCtlSourceAddress, to be used at a remote host - when a ping operation is performed." - DEFVAL { unknown } - ::= { pingCtlEntry 18 } - - pingCtlSourceAddress OBJECT-TYPE - SYNTAX InetAddress - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "Use the specified IP address (which must be given in - numeric form, not as a hostname) as the source address - in outgoing probe packets. On hosts with more than one - IP address, this option can be used to select the address - to be used. If the IP address is not one of this - machine's interface addresses, an error is returned and - nothing is sent. A zero-length octet string value for - this object disables source address specification. - - The address type (InetAddressType) that relates to - this object is specified by the corresponding value - of pingCtlSourceAddressType." - DEFVAL { ''H } - ::= { pingCtlEntry 19 } - - pingCtlIfIndex OBJECT-TYPE - SYNTAX InterfaceIndexOrZero - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "Setting this object to an interface's ifIndex prior - to starting a remote ping operation directs - the ping probes to be transmitted over the - specified interface. A value of zero for this object - means that this option is not enabled." - DEFVAL { 0 } - ::= { pingCtlEntry 20 } - - pingCtlByPassRouteTable OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The purpose of this object is to enable optional - bypassing the route table. If enabled, the remote - host will bypass the normal routing tables and send - directly to a host on an attached network. If the - host is not on a directly attached network, an - error is returned. This option can be used to perform - the ping operation to a local host through an - interface that has no route defined (e.g., after the - interface was dropped by the routing daemon at the host)." - DEFVAL { false } - ::= { pingCtlEntry 21 } - - pingCtlDSField OBJECT-TYPE - SYNTAX Unsigned32 (0..255) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "Specifies the value to store in the Type of Service - (TOS) octet in the IPv4 header or in the Traffic - Class octet in the IPv6 header, respectively, of the - IP packet used to encapsulate the ping probe. - - The octet to be set in the IP header contains the - Differentiated Services (DS) Field in the six most - significant bits. - - This option can be used to determine what effect an - explicit DS Field setting has on a ping response. - Not all values are legal or meaningful. A value of 0 - means that the function represented by this option is - not supported. DS Field usage is often not supported - by IP implementations, and not all values are supported. - Refer to RFC 2474 and RFC 3260 for guidance on usage of - this field." - REFERENCE - "Refer to RFC 1812 for the definition of the IPv4 TOS - octet and to RFC 2460 for the definition of the IPv6 - Traffic Class octet. Refer to RFC 2474 and RFC 3260 - for the definition of the Differentiated Services Field." - DEFVAL { 0 } - ::= { pingCtlEntry 22 } - - pingCtlRowStatus OBJECT-TYPE - SYNTAX RowStatus - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "This object allows entries to be created and deleted - in the pingCtlTable. Deletion of an entry in this - table results in the deletion of all corresponding (same - pingCtlOwnerIndex and pingCtlTestName index values) - pingResultsTable and pingProbeHistoryTable entries. - - A value MUST be specified for pingCtlTargetAddress - prior to acceptance of a transition to active(1) state. - - When a value for pingCtlTargetAddress is set, - the value of object pingCtlRowStatus changes - from notReady(3) to notInService(2). - - Activation of a remote ping operation is controlled - via pingCtlAdminStatus, not by changing - this object's value to active(1). - - Transitions in and out of active(1) state are not - allowed while an entry's pingResultsOperStatus is - active(1), with the exception that deletion of - an entry in this table by setting its RowStatus - object to destroy(6) will stop an active - ping operation. - - The operational state of a ping operation - can be determined by examination of its - pingResultsOperStatus object." - REFERENCE - "See definition of RowStatus in RFC 2579, 'Textual - Conventions for SMIv2.'" - ::= { pingCtlEntry 23 } - --- Ping Results Table - - pingResultsTable OBJECT-TYPE - SYNTAX SEQUENCE OF PingResultsEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Defines the Ping Results Table for providing - the capability of performing ping operations at - a remote host. The results of these operations are - stored in the pingResultsTable and the pingProbeHistoryTable. - - An entry is added to the pingResultsTable when an - pingCtlEntry is started by successful transition - of its pingCtlAdminStatus object to enabled(1). - - If the object pingCtlAdminStatus already has the value - enabled(1), and if the corresponding pingResultsOperStatus - object has the value completed(3), then successfully writing - enabled(1) to object pingCtlAdminStatus re-initializes the - already existing entry in the pingResultsTable. The values - of objects in the re-initialized entry are the same as the - values of objects in a new entry would be. - - An entry is removed from the pingResultsTable when - its corresponding pingCtlEntry is deleted." - ::= { pingObjects 3 } - - pingResultsEntry OBJECT-TYPE - SYNTAX PingResultsEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Defines an entry in the pingResultsTable. The - pingResultsTable has the same indexing as the - pingCtlTable so that a pingResultsEntry - corresponds to the pingCtlEntry that caused it to - be created." - INDEX { - pingCtlOwnerIndex, - pingCtlTestName - } - ::= { pingResultsTable 1 } - - PingResultsEntry ::= - SEQUENCE { - pingResultsOperStatus INTEGER, - pingResultsIpTargetAddressType InetAddressType, - pingResultsIpTargetAddress InetAddress, - pingResultsMinRtt Unsigned32, - pingResultsMaxRtt Unsigned32, - pingResultsAverageRtt Unsigned32, - pingResultsProbeResponses Gauge32, - pingResultsSentProbes Gauge32, - pingResultsRttSumOfSquares Unsigned32, - pingResultsLastGoodProbe DateAndTime - } - - pingResultsOperStatus OBJECT-TYPE - SYNTAX INTEGER { - enabled(1), -- test is in progress - disabled(2), -- test has stopped - completed(3) -- test is completed - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Reflects the operational state of a pingCtlEntry: - - enabled(1) - Test is active. - disabled(2) - Test has stopped. - completed(3) - Test is completed." - ::= { pingResultsEntry 1 } - - pingResultsIpTargetAddressType OBJECT-TYPE - SYNTAX InetAddressType - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This object indicates the type of address stored - in the corresponding pingResultsIpTargetAddress - object." - DEFVAL { unknown } - ::= { pingResultsEntry 2 } - - pingResultsIpTargetAddress OBJECT-TYPE - SYNTAX InetAddress - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This object reports the IP address associated - with a pingCtlTargetAddress value when the destination - address is specified as a DNS name. The value of - this object should be a zero-length octet string - when a DNS name is not specified or when a - specified DNS name fails to resolve. - - The address type (InetAddressType) that relates to - this object is specified by the corresponding value - of pingResultsIpTargetAddressType." - DEFVAL { ''H } - ::= { pingResultsEntry 3 } - - pingResultsMinRtt OBJECT-TYPE - SYNTAX Unsigned32 - UNITS "milliseconds" - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The minimum ping round-trip-time (RTT) received. A value - of 0 for this object implies that no RTT has been received." - ::= { pingResultsEntry 4 } - - pingResultsMaxRtt OBJECT-TYPE - SYNTAX Unsigned32 - UNITS "milliseconds" - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The maximum ping round-trip-time (RTT) received. A value - of 0 for this object implies that no RTT has been received." - ::= { pingResultsEntry 5 } - - pingResultsAverageRtt OBJECT-TYPE - SYNTAX Unsigned32 - UNITS "milliseconds" - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The current average ping round-trip-time (RTT)." - ::= { pingResultsEntry 6 } - - pingResultsProbeResponses OBJECT-TYPE - SYNTAX Gauge32 - UNITS "responses" - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Number of responses received for the corresponding - pingCtlEntry and pingResultsEntry. The value of this object - MUST be reported as 0 when no probe responses have been - received." - ::= { pingResultsEntry 7 } - - pingResultsSentProbes OBJECT-TYPE - SYNTAX Gauge32 - UNITS "probes" - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The value of this object reflects the number of probes sent - for the corresponding pingCtlEntry and pingResultsEntry. - The value of this object MUST be reported as 0 when no probes - have been sent." - ::= { pingResultsEntry 8 } - - pingResultsRttSumOfSquares OBJECT-TYPE - SYNTAX Unsigned32 - UNITS "milliseconds" - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This object contains the sum of the squares for all ping - responses received. Its purpose is to enable standard - deviation calculation. The value of this object MUST - be reported as 0 when no ping responses have been - received." - ::= { pingResultsEntry 9 } - - pingResultsLastGoodProbe OBJECT-TYPE - SYNTAX DateAndTime - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Date and time when the last response was received for - a probe." - ::= { pingResultsEntry 10 } - - -- Ping Probe History Table - - pingProbeHistoryTable OBJECT-TYPE - SYNTAX SEQUENCE OF PingProbeHistoryEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Defines a table for storing the results of ping - operations. The number of entries in this table is - limited per entry in the pingCtlTable by the value - of the corresponding pingCtlMaxRows object. - - An entry in this table is created when the result of - a ping probe is determined. The initial 2 instance - identifier index values identify the pingCtlEntry - that a probe result (pingProbeHistoryEntry) belongs - to. An entry is removed from this table when - its corresponding pingCtlEntry is deleted. - - An implementation of this MIB will remove the oldest - entry in the pingProbeHistoryTable of the - corresponding entry in the pingCtlTable to allow - the addition of an new entry once the number of rows - in the pingProbeHistoryTable reaches the value - specified by pingCtlMaxRows for the corresponding - entry in the pingCtlTable." - ::= { pingObjects 4 } - - pingProbeHistoryEntry OBJECT-TYPE - SYNTAX PingProbeHistoryEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Defines an entry in the pingProbeHistoryTable. - The first two index elements identify the - pingCtlEntry that a pingProbeHistoryEntry belongs - to. The third index element selects a single - probe result." - INDEX { - - pingCtlOwnerIndex, - pingCtlTestName, - pingProbeHistoryIndex - } - ::= { pingProbeHistoryTable 1 } - - PingProbeHistoryEntry ::= - SEQUENCE { - pingProbeHistoryIndex Unsigned32, - pingProbeHistoryResponse Unsigned32, - pingProbeHistoryStatus OperationResponseStatus, - pingProbeHistoryLastRC Integer32, - pingProbeHistoryTime DateAndTime - } - - pingProbeHistoryIndex OBJECT-TYPE - SYNTAX Unsigned32 (1..'ffffffff'h) - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "An entry in this table is created when the result of - a ping probe is determined. The initial 2 instance - identifier index values identify the pingCtlEntry - that a probe result (pingProbeHistoryEntry) belongs - to. - - An implementation MUST start assigning - pingProbeHistoryIndex values at 1 and wrap after - exceeding the maximum possible value as defined by - the limit of this object ('ffffffff'h)." - ::= { pingProbeHistoryEntry 1 } - - pingProbeHistoryResponse OBJECT-TYPE - SYNTAX Unsigned32 - UNITS "milliseconds" - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The amount of time measured in milliseconds from when - a probe was sent to when its response was received or - when it timed out. The value of this object is reported - as 0 when it is not possible to transmit a probe." - ::= { pingProbeHistoryEntry 2 } - - pingProbeHistoryStatus OBJECT-TYPE - SYNTAX OperationResponseStatus - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The result of a particular probe done by a remote host." - ::= { pingProbeHistoryEntry 3 } - - pingProbeHistoryLastRC OBJECT-TYPE - SYNTAX Integer32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The last implementation-method-specific reply code received. - If the ICMP Echo capability is being used, then a successful - probe ends when an ICMP response is received that contains - the code ICMP_ECHOREPLY(0). The ICMP codes are maintained - by IANA. Standardized ICMP codes are listed at - http://www.iana.org/assignments/icmp-parameters. - The ICMPv6 codes are listed at - http://www.iana.org/assignments/icmpv6-parameters." - ::= { pingProbeHistoryEntry 4 } - - pingProbeHistoryTime OBJECT-TYPE - SYNTAX DateAndTime - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Timestamp for when this probe result was determined." - ::= { pingProbeHistoryEntry 5 } - - -- Notification Definition section - - pingProbeFailed NOTIFICATION-TYPE - OBJECTS { - pingCtlTargetAddressType, - pingCtlTargetAddress, - pingResultsOperStatus, - pingResultsIpTargetAddressType, - pingResultsIpTargetAddress, - pingResultsMinRtt, - pingResultsMaxRtt, - pingResultsAverageRtt, - pingResultsProbeResponses, - pingResultsSentProbes, - pingResultsRttSumOfSquares, - pingResultsLastGoodProbe - } - STATUS current - DESCRIPTION - "Generated when a probe failure is detected, when the - - corresponding pingCtlTrapGeneration object is set to - probeFailure(0), subject to the value of - pingCtlTrapProbeFailureFilter. The object - pingCtlTrapProbeFailureFilter can be used to specify the - number of consecutive probe failures that are required - before this notification can be generated." - ::= { pingNotifications 1 } - - pingTestFailed NOTIFICATION-TYPE - OBJECTS { - pingCtlTargetAddressType, - pingCtlTargetAddress, - pingResultsOperStatus, - pingResultsIpTargetAddressType, - pingResultsIpTargetAddress, - pingResultsMinRtt, - pingResultsMaxRtt, - pingResultsAverageRtt, - pingResultsProbeResponses, - pingResultsSentProbes, - pingResultsRttSumOfSquares, - pingResultsLastGoodProbe - } - STATUS current - DESCRIPTION - "Generated when a ping test is determined to have failed, - when the corresponding pingCtlTrapGeneration object is - set to testFailure(1). In this instance, - pingCtlTrapTestFailureFilter should specify the number of - probes in a test required to have failed in order to - consider the test failed." - ::= { pingNotifications 2 } - - pingTestCompleted NOTIFICATION-TYPE - OBJECTS { - pingCtlTargetAddressType, - pingCtlTargetAddress, - pingResultsOperStatus, - pingResultsIpTargetAddressType, - pingResultsIpTargetAddress, - pingResultsMinRtt, - pingResultsMaxRtt, - pingResultsAverageRtt, - pingResultsProbeResponses, - pingResultsSentProbes, - pingResultsRttSumOfSquares, - pingResultsLastGoodProbe - - } - STATUS current - DESCRIPTION - "Generated at the completion of a ping test when the - corresponding pingCtlTrapGeneration object has the - testCompletion(2) bit set." - ::= { pingNotifications 3 } - - -- Conformance information - - -- Compliance statements - - pingCompliances OBJECT IDENTIFIER ::= { pingConformance 1 } - pingGroups OBJECT IDENTIFIER ::= { pingConformance 2 } - - -- Compliance statements - - pingFullCompliance MODULE-COMPLIANCE - STATUS current - DESCRIPTION - "The compliance statement for SNMP entities that - fully implement the DISMAN-PING-MIB." - MODULE -- this module - MANDATORY-GROUPS { - pingMinimumGroup, - pingCtlRowStatusGroup, - pingHistoryGroup, - pingNotificationsGroup - } - - OBJECT pingMaxConcurrentRequests - MIN-ACCESS read-only - DESCRIPTION - "The agent is not required to support set - operations to this object." - - OBJECT pingCtlStorageType - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required." - - OBJECT pingCtlType - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required. In addition, the only - value that MUST be supported by an implementation is - pingIcmpEcho." - - OBJECT pingCtlSourceAddressType - SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) } - MIN-ACCESS read-only - DESCRIPTION - "Write access to this object is not required by - implementations that are not capable of binding the - send socket with a source address. An implementation - is only required to support IPv4 and IPv6 addresses." - - OBJECT pingCtlSourceAddress - SYNTAX InetAddress (SIZE(0|4|16)) - MIN-ACCESS read-only - DESCRIPTION - "Write access to this object is not required by - implementations that are not capable of binding the - send socket with a source address. An implementation - is only required to support IPv4 and IPv6 addresses." - - OBJECT pingCtlIfIndex - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required. If write access is - not supported, return a 0 as the value of this object. - A value of 0 means that the function represented by - this option is not supported." - - OBJECT pingCtlByPassRouteTable - MIN-ACCESS read-only - DESCRIPTION - "Write access to this object is not required by - implementations that are not capable of its - implementation. The function represented by this - object is implementable if the setsockopt - SOL_SOCKET SO_DONTROUTE option is supported." - - OBJECT pingCtlDSField - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required. If write access is - not supported, return a 0 as the value of this object. - A value of 0 means that the function represented by - this option is not supported." - - OBJECT pingResultsIpTargetAddressType - SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) } - DESCRIPTION - "An implementation is only required to - - support IPv4 and IPv6 addresses." - - OBJECT pingResultsIpTargetAddress - SYNTAX InetAddress (SIZE(0|4|16)) - DESCRIPTION - "An implementation is only required to - support IPv4 and globally unique IPv6 addresses." - - OBJECT pingResultsLastGoodProbe - DESCRIPTION - "This object is mandatory for implementations that have - access to a system clock and that are capable of setting - the values for DateAndTime objects. It is RECOMMENDED - that when this object is not supported its values - be reported as '0000000000000000'H." - - OBJECT pingProbeHistoryTime - DESCRIPTION - "This object is mandatory for implementations that have - access to a system clock and that are capable of setting - the values for DateAndTime objects. It is RECOMMENDED - that when this object is not supported its values - be reported as '0000000000000000'H." - ::= { pingCompliances 2 } - - pingMinimumCompliance MODULE-COMPLIANCE - STATUS current - DESCRIPTION - "The minimum compliance statement for SNMP entities - that implement the minimal subset of the - DISMAN-PING-MIB. Implementors might choose this - subset for small devices with limited resources." - MODULE -- this module - MANDATORY-GROUPS { pingMinimumGroup } - - GROUP pingCtlRowStatusGroup - DESCRIPTION - "A compliant implementation does not have to implement - the pingCtlRowStatusGroup." - - GROUP pingHistoryGroup - DESCRIPTION - "A compliant implementation does not have to implement - the pingHistoryGroup." - - GROUP pingNotificationsGroup - DESCRIPTION - "A compliant implementation does not have to implement - - the pingNotificationsGroup." - - OBJECT pingMaxConcurrentRequests - MIN-ACCESS read-only - DESCRIPTION - "The agent is not required to support set - operations to this object." - - OBJECT pingCtlDataFill - MIN-ACCESS read-only - DESCRIPTION - "The agent is not required to support set - operations to this object." - - OBJECT pingCtlFrequency - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required. If write access is - not supported, return a 0 as the value of this object. - A value of 0 means that the function represented by - this option is not supported." - - OBJECT pingCtlMaxRows - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required. If the - pingHistoryGroup is not implemented, then write - access to this object MUST be disabled, and the object - MUST return a value of 0 when retrieved." - - OBJECT pingCtlStorageType - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required." - - OBJECT pingCtlTrapGeneration - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required. If the - pingNotificationsGroup is not implemented, then write - access to this object MUST be disabled, and the object - MUST return a value with no bit set when retrieved. - No bit set indicates that not notification is - generated." - - OBJECT pingCtlTrapProbeFailureFilter - MIN-ACCESS read-only - DESCRIPTION - "If write access to pingCtlTrapGeneration is not - supported, then write access to this object must also - not be supported. In this case, return 0 as the value - of this object." - - OBJECT pingCtlTrapTestFailureFilter - MIN-ACCESS read-only - DESCRIPTION - "If write access to pingCtlTrapGeneration is not - supported, then write access to this object must also - not be supported. In this case, return 0 as the value - of this object." - - OBJECT pingCtlType - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required. In addition, the only - value that MUST be supported by an implementation is - pingIcmpEcho." - - OBJECT pingCtlDescr - MIN-ACCESS read-only - DESCRIPTION - "The agent is not required to support set - operations to this object." - - OBJECT pingCtlSourceAddressType - SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) } - MIN-ACCESS read-only - DESCRIPTION - "Write access to this object is not required by - implementations that are not capable of binding the - send socket with a source address. An implementation - is only required to support IPv4 and IPv6 addresses." - - OBJECT pingCtlSourceAddress - SYNTAX InetAddress (SIZE(0|4|16)) - MIN-ACCESS read-only - DESCRIPTION - "Write access to this object is not required by - implementations that are not capable of binding the - send socket with a source address. An implementation - is only required to support IPv4 and IPv6 addresses." - - OBJECT pingCtlIfIndex - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required. If write access is - - not supported, return a 0 as the value of this object. - A value of 0 means that the function represented by - this option is not supported." - - OBJECT pingCtlByPassRouteTable - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required. If write access is - not supported, return false(2) as the value of this - object. A value of false(2) means that the function - represented by this option is not supported." - - OBJECT pingCtlDSField - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required. If write access is - not supported, return a 0 as the value of this object. - A value of 0 means that the function represented by - this option is not supported." - - OBJECT pingResultsIpTargetAddressType - SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) } - DESCRIPTION - "An implementation is only required to - support IPv4 and IPv6 addresses." - - OBJECT pingResultsIpTargetAddress - SYNTAX InetAddress (SIZE(0|4|16)) - DESCRIPTION - "An implementation is only required to - support IPv4 and globally unique IPv6 addresses." - - OBJECT pingResultsLastGoodProbe - DESCRIPTION - "This object is mandatory for implementations that have - access to a system clock and that are capable of setting - the values for DateAndTime objects. It is RECOMMENDED - that when this object is not supported its values - be reported as '0000000000000000'H." - - OBJECT pingProbeHistoryTime - DESCRIPTION - "If the pingHistoryGroup is implemented, then this - object is mandatory for implementations that have - access to a system clock and that are capable of setting - the values for DateAndTime objects. It is RECOMMENDED - that when this object is not supported its values - - be reported as '0000000000000000'H." - ::= { pingCompliances 3 } - - pingCompliance MODULE-COMPLIANCE - STATUS deprecated - DESCRIPTION - "The compliance statement for the DISMAN-PING-MIB. This - compliance statement has been deprecated because the - group pingGroup and the pingTimeStampGroup have been - split and deprecated. The pingFullCompliance statement - is semantically identical to the deprecated - pingCompliance statement." - - MODULE -- this module - MANDATORY-GROUPS { - pingGroup, - pingNotificationsGroup - } - GROUP pingTimeStampGroup - DESCRIPTION - "This group is mandatory for implementations that have - access to a system clock and that are capable of setting - the values for DateAndTime objects. It is RECOMMENDED - that when this group is not supported the values - for the objects in this group be reported as - '0000000000000000'H." - - OBJECT pingMaxConcurrentRequests - MIN-ACCESS read-only - DESCRIPTION - "The agent is not required to support set - operations to this object." - - OBJECT pingCtlStorageType - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required. It is also allowed - that implementations support only the volatile - StorageType enumeration." - - OBJECT pingCtlType - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required. In addition, the only - value that MUST be supported by an implementation is - pingIcmpEcho." - - OBJECT pingCtlByPassRouteTable - MIN-ACCESS read-only - DESCRIPTION - "This object is not required by implementations that - are not capable of its implementation. The function - represented by this object is implementable if the - setsockopt SOL_SOCKET SO_DONTROUTE option is - supported." - - OBJECT pingCtlSourceAddressType - SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) } - MIN-ACCESS read-only - DESCRIPTION - "This object is not required by implementations that - are not capable of binding the send socket with a - source address. An implementation is only required to - support IPv4 and IPv6 addresses." - - OBJECT pingCtlSourceAddress - SYNTAX InetAddress (SIZE(0|4|16)) - MIN-ACCESS read-only - DESCRIPTION - "This object is not required by implementations that - are not capable of binding the send socket with a - source address. An implementation is only required to - support IPv4 and globally unique IPv6 addresses." - - OBJECT pingCtlIfIndex - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required. When write access is - not supported, return a 0 as the value of this object. - A value of 0 means that the function represented by - this option is not supported." - - OBJECT pingCtlDSField - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required. When write access is - not supported, return a 0 as the value of this object. - A value of 0 means that the function represented by - this option is not supported." - - OBJECT pingResultsIpTargetAddressType - SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) } - DESCRIPTION - "An implementation is only required to - support IPv4 and IPv6 addresses." - - OBJECT pingResultsIpTargetAddress - SYNTAX InetAddress (SIZE(0|4|16)) - DESCRIPTION - "An implementation is only required to - support IPv4 and globally unique IPv6 addresses." - ::= { pingCompliances 1 } - - -- MIB groupings - - pingMinimumGroup OBJECT-GROUP - OBJECTS { - pingMaxConcurrentRequests, - pingCtlTargetAddressType, - pingCtlTargetAddress, - pingCtlDataSize, - pingCtlTimeOut, - pingCtlProbeCount, - pingCtlAdminStatus, - pingCtlDataFill, - pingCtlFrequency, - pingCtlMaxRows, - pingCtlStorageType, - pingCtlTrapGeneration, - pingCtlTrapProbeFailureFilter, - pingCtlTrapTestFailureFilter, - pingCtlType, - pingCtlDescr, - pingCtlByPassRouteTable, - pingCtlSourceAddressType, - pingCtlSourceAddress, - pingCtlIfIndex, - pingCtlDSField, - pingResultsOperStatus, - pingResultsIpTargetAddressType, - pingResultsIpTargetAddress, - pingResultsMinRtt, - pingResultsMaxRtt, - pingResultsAverageRtt, - pingResultsProbeResponses, - pingResultsSentProbes, - pingResultsRttSumOfSquares, - pingResultsLastGoodProbe - } - STATUS current - DESCRIPTION - "The group of objects that constitute the remote ping - capability." - ::= { pingGroups 4 } - - pingCtlRowStatusGroup OBJECT-GROUP - OBJECTS { - pingCtlRowStatus - } - STATUS current - DESCRIPTION - "The RowStatus object of the pingCtlTable." - ::= { pingGroups 5 } - - pingHistoryGroup OBJECT-GROUP - OBJECTS { - pingProbeHistoryResponse, - pingProbeHistoryStatus, - pingProbeHistoryLastRC, - pingProbeHistoryTime - } - STATUS current - DESCRIPTION - "The group of objects that constitute the history - capability." - ::= { pingGroups 6 } - - pingNotificationsGroup NOTIFICATION-GROUP - NOTIFICATIONS { - pingProbeFailed, - pingTestFailed, - pingTestCompleted - } - STATUS current - DESCRIPTION - "The notification that are required to be supported by - implementations of this MIB." - ::= { pingGroups 3 } - - pingGroup OBJECT-GROUP - OBJECTS { - pingMaxConcurrentRequests, - pingCtlTargetAddressType, - pingCtlTargetAddress, - pingCtlDataSize, - pingCtlTimeOut, - pingCtlProbeCount, - pingCtlAdminStatus, - pingCtlDataFill, - pingCtlFrequency, - pingCtlMaxRows, - pingCtlStorageType, - pingCtlTrapGeneration, - pingCtlTrapProbeFailureFilter, - pingCtlTrapTestFailureFilter, - pingCtlType, - pingCtlDescr, - pingCtlByPassRouteTable, - pingCtlSourceAddressType, - pingCtlSourceAddress, - pingCtlIfIndex, - pingCtlDSField, - pingCtlRowStatus, - pingResultsOperStatus, - pingResultsIpTargetAddressType, - pingResultsIpTargetAddress, - pingResultsMinRtt, - pingResultsMaxRtt, - pingResultsAverageRtt, - pingResultsProbeResponses, - pingResultsSentProbes, - pingResultsRttSumOfSquares, - pingProbeHistoryResponse, - pingProbeHistoryStatus, - pingProbeHistoryLastRC - } - STATUS deprecated - DESCRIPTION - "The group of objects that constitute the remote ping - capability." - ::= { pingGroups 1 } - - pingTimeStampGroup OBJECT-GROUP - - OBJECTS { - pingResultsLastGoodProbe, - pingProbeHistoryTime - } - STATUS deprecated - DESCRIPTION - "The group of DateAndTime objects." - ::= { pingGroups 2 } - -END |