diff options
Diffstat (limited to 'data/mibs/DISMAN-SCRIPT-MIB.txt')
| -rw-r--r-- | data/mibs/DISMAN-SCRIPT-MIB.txt | 1764 |
1 files changed, 0 insertions, 1764 deletions
diff --git a/data/mibs/DISMAN-SCRIPT-MIB.txt b/data/mibs/DISMAN-SCRIPT-MIB.txt deleted file mode 100644 index 834f3047f..000000000 --- a/data/mibs/DISMAN-SCRIPT-MIB.txt +++ /dev/null @@ -1,1764 +0,0 @@ -DISMAN-SCRIPT-MIB DEFINITIONS ::= BEGIN - -IMPORTS - MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, - Integer32, Unsigned32, mib-2 - FROM SNMPv2-SMI - - RowStatus, TimeInterval, DateAndTime, StorageType, DisplayString - FROM SNMPv2-TC - - MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP - FROM SNMPv2-CONF - - SnmpAdminString - FROM SNMP-FRAMEWORK-MIB; - -scriptMIB MODULE-IDENTITY - LAST-UPDATED "200108210000Z" - ORGANIZATION "IETF Distributed Management Working Group" - CONTACT-INFO - "WG EMail: disman@dorothy.bmc.com - Subscribe: disman-request@dorothy.bmc.com - - Chair: Randy Presuhn - BMC Software, Inc. - - Postal: Office 1-3141 - 2141 North First Street - San Jose, California 95131 - USA - EMail: rpresuhn@bmc.com - Phone: +1 408 546-1006 - - Editor: David B. Levi - Nortel Networks - Postal: 4401 Great America Parkway - Santa Clara, CA 95052-8185 - USA - EMail: dlevi@nortelnetworks.com - Phone: +1 423 686 0432 - - Editor: Juergen Schoenwaelder - TU Braunschweig - Postal: Bueltenweg 74/75 - 38106 Braunschweig - Germany - EMail: schoenw@ibr.cs.tu-bs.de - Phone: +49 531 391-3283" - DESCRIPTION - "This MIB module defines a set of objects that allow to - delegate management scripts to distributed managers." - REVISION "200108210000Z" - DESCRIPTION - "Revised version, published as RFC 3165. - - This revision introduces several new objects: smScriptError, - smScriptLastChange, smLaunchError, smLaunchLastChange, - smLaunchRowExpireTime, smRunResultTime, and smRunErrorTime. - - The following existing objects were updated: the maximum - value of smRunLifeTime now disables the timer, an - autostart value was added to the smLaunchAdminStatus - object, and a new expired state was added to the - smLaunchOperStatus object. - - A new smScriptException notification has been added to - support runtime error notifications. - - Created new conformance and compliance statements that - take care of the new objects and notifications. - - Clarifications have been added in several places to remove - ambiguities or contradictions that were discovered and - reported by implementors." - - REVISION "199902221800Z" - DESCRIPTION - "Initial version, published as RFC 2592." - ::= { mib-2 64 } - --- --- The groups defined within this MIB module: --- - -smObjects OBJECT IDENTIFIER ::= { scriptMIB 1 } -smNotifications OBJECT IDENTIFIER ::= { scriptMIB 2 } -smConformance OBJECT IDENTIFIER ::= { scriptMIB 3 } - --- --- Script language and language extensions. --- --- This group defines tables which list the languages and the --- language extensions supported by a Script MIB implementation. --- Languages are uniquely identified by object identifier values. --- - -smLangTable OBJECT-TYPE - SYNTAX SEQUENCE OF SmLangEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "This table lists supported script languages." - ::= { smObjects 1 } - -smLangEntry OBJECT-TYPE - SYNTAX SmLangEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "An entry describing a particular language." - INDEX { smLangIndex } - ::= { smLangTable 1 } - -SmLangEntry ::= SEQUENCE { - smLangIndex Integer32, - smLangLanguage OBJECT IDENTIFIER, - smLangVersion SnmpAdminString, - smLangVendor OBJECT IDENTIFIER, - smLangRevision SnmpAdminString, - smLangDescr SnmpAdminString -} - -smLangIndex OBJECT-TYPE - SYNTAX Integer32 (1..2147483647) - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The locally arbitrary, but unique identifier associated - with this language entry. - - The value is expected to remain constant at least from one - re-initialization of the entity's network management system - to the next re-initialization. - - Note that the data type and the range of this object must - be consistent with the definition of smScriptLanguage." - ::= { smLangEntry 1 } - -smLangLanguage OBJECT-TYPE - SYNTAX OBJECT IDENTIFIER - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The globally unique identification of the language." - ::= { smLangEntry 2 } - -smLangVersion OBJECT-TYPE - SYNTAX SnmpAdminString (SIZE (0..32)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The version number of the language. The zero-length string - shall be used if the language does not have a version - number. - - It is suggested that the version number consist of one or - more decimal numbers separated by dots, where the first - number is called the major version number." - ::= { smLangEntry 3 } - -smLangVendor OBJECT-TYPE - SYNTAX OBJECT IDENTIFIER - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "An object identifier which identifies the vendor who - provides the implementation of the language. This object - identifier SHALL point to the object identifier directly - below the enterprise object identifier {1 3 6 1 4 1} - allocated for the vendor. The value must be the object - identifier {0 0} if the vendor is not known." - ::= { smLangEntry 4 } - -smLangRevision OBJECT-TYPE - SYNTAX SnmpAdminString (SIZE (0..32)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The version number of the language implementation. - The value of this object must be an empty string if - version number of the implementation is unknown. - - It is suggested that the value consist of one or more - decimal numbers separated by dots, where the first - number is called the major version number." - ::= { smLangEntry 5 } - -smLangDescr OBJECT-TYPE - SYNTAX SnmpAdminString - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A textual description of the language." - ::= { smLangEntry 6 } - -smExtsnTable OBJECT-TYPE - SYNTAX SEQUENCE OF SmExtsnEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "This table lists supported language extensions." - ::= { smObjects 2 } - -smExtsnEntry OBJECT-TYPE - SYNTAX SmExtsnEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "An entry describing a particular language extension." - INDEX { smLangIndex, smExtsnIndex } - ::= { smExtsnTable 1 } - -SmExtsnEntry ::= SEQUENCE { - smExtsnIndex Integer32, - smExtsnExtension OBJECT IDENTIFIER, - smExtsnVersion SnmpAdminString, - smExtsnVendor OBJECT IDENTIFIER, - smExtsnRevision SnmpAdminString, - smExtsnDescr SnmpAdminString -} - -smExtsnIndex OBJECT-TYPE - SYNTAX Integer32 (1..2147483647) - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The locally arbitrary, but unique identifier associated - with this language extension entry. - - The value is expected to remain constant at least from one - re-initialization of the entity's network management system - to the next re-initialization." - ::= { smExtsnEntry 1} - -smExtsnExtension OBJECT-TYPE - SYNTAX OBJECT IDENTIFIER - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The globally unique identification of the language - extension." - ::= { smExtsnEntry 2 } - -smExtsnVersion OBJECT-TYPE - SYNTAX SnmpAdminString (SIZE (0..32)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The version number of the language extension. - It is suggested that the version number consist of one or - more decimal numbers separated by dots, where the first - number is called the major version number." - ::= { smExtsnEntry 3 } - -smExtsnVendor OBJECT-TYPE - SYNTAX OBJECT IDENTIFIER - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "An object identifier which identifies the vendor who - provides the implementation of the extension. The - object identifier value should point to the OID node - directly below the enterprise OID {1 3 6 1 4 1} - allocated for the vendor. The value must by the object - identifier {0 0} if the vendor is not known." - ::= { smExtsnEntry 4 } - -smExtsnRevision OBJECT-TYPE - SYNTAX SnmpAdminString (SIZE (0..32)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The version number of the extension implementation. - The value of this object must be an empty string if - version number of the implementation is unknown. - - It is suggested that the value consist of one or more - decimal numbers separated by dots, where the first - number is called the major version number." - ::= { smExtsnEntry 5 } - -smExtsnDescr OBJECT-TYPE - SYNTAX SnmpAdminString - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A textual description of the language extension." - ::= { smExtsnEntry 6 } - --- --- Scripts known by the Script MIB implementation. --- --- This group defines a table which lists all known scripts. --- Scripts can be added and removed through manipulation of the --- smScriptTable. --- - -smScriptObjects OBJECT IDENTIFIER ::= { smObjects 3 } - -smScriptTable OBJECT-TYPE - SYNTAX SEQUENCE OF SmScriptEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "This table lists and describes locally known scripts." - ::= { smScriptObjects 1 } - -smScriptEntry OBJECT-TYPE - SYNTAX SmScriptEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "An entry describing a particular script. Every script that - is stored in non-volatile memory is required to appear in - this script table." - INDEX { smScriptOwner, smScriptName } - ::= { smScriptTable 1 } - -SmScriptEntry ::= SEQUENCE { - smScriptOwner SnmpAdminString, - smScriptName SnmpAdminString, - smScriptDescr SnmpAdminString, - smScriptLanguage Integer32, - smScriptSource DisplayString, - smScriptAdminStatus INTEGER, - smScriptOperStatus INTEGER, - smScriptStorageType StorageType, - smScriptRowStatus RowStatus, - smScriptError SnmpAdminString, - smScriptLastChange DateAndTime -} - -smScriptOwner OBJECT-TYPE - SYNTAX SnmpAdminString (SIZE (0..32)) - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The manager who owns this row in the smScriptTable." - ::= { smScriptEntry 1 } - -smScriptName OBJECT-TYPE - SYNTAX SnmpAdminString (SIZE (1..32)) - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The locally-unique, administratively assigned name for this - script. This object allows an smScriptOwner to have multiple - entries in the smScriptTable. - - This value of this object may be used to derive the name - (e.g. a file name) which is used by the Script MIB - implementation to access the script in non-volatile - storage. The details of this mapping are implementation - specific. However, the mapping needs to ensure that scripts - created by different owners with the same script name do not - map to the same name in non-volatile storage." - ::= { smScriptEntry 2 } - -smScriptDescr OBJECT-TYPE - SYNTAX SnmpAdminString - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "A description of the purpose of the script." - ::= { smScriptEntry 3 } - -smScriptLanguage OBJECT-TYPE - SYNTAX Integer32 (0..2147483647) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The value of this object type identifies an entry in the - smLangTable which is used to execute this script. - The special value 0 may be used by hard-wired scripts - that can not be modified and that are executed by - internal functions. - - Set requests to change this object are invalid if the - value of smScriptOperStatus is `enabled' or `compiling' - and will result in an inconsistentValue error. - - Note that the data type and the range of this object must - be consistent with the definition of smLangIndex." - ::= { smScriptEntry 4 } - -smScriptSource OBJECT-TYPE - SYNTAX DisplayString - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "This object either contains a reference to the script - source or an empty string. A reference must be given - in the form of a Uniform Resource Locator (URL) as - defined in RFC 2396. The allowed character sets and the - encoding rules defined in RFC 2396 section 2 apply. - - When the smScriptAdminStatus object is set to `enabled', - the Script MIB implementation will `pull' the script - source from the URL contained in this object if the URL - is not empty. - - An empty URL indicates that the script source is loaded - from local storage. The script is read from the smCodeTable - if the value of smScriptStorageType is volatile. Otherwise, - the script is read from non-volatile storage. - - Note: This document does not mandate implementation of any - specific URL scheme. An attempt to load a script from a - nonsupported URL scheme will cause the smScriptOperStatus - to report an `unknownProtocol' error. - - Set requests to change this object are invalid if the - value of smScriptOperStatus is `enabled', `editing', - `retrieving' or `compiling' and will result in an - inconsistentValue error." - DEFVAL { ''H } - ::= { smScriptEntry 5 } - -smScriptAdminStatus OBJECT-TYPE - SYNTAX INTEGER { - enabled(1), - disabled(2), - editing(3) - } - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The value of this object indicates the desired status of - the script. See the definition of smScriptOperStatus for - a description of the values. - - When the smScriptAdminStatus object is set to `enabled' and - the smScriptOperStatus is `disabled' or one of the error - states, the Script MIB implementation will `pull' the script - source from the URL contained in the smScriptSource object - if the URL is not empty." - DEFVAL { disabled } - ::= { smScriptEntry 6 } - -smScriptOperStatus OBJECT-TYPE - SYNTAX INTEGER { - enabled(1), - disabled(2), - editing(3), - retrieving(4), - compiling(5), - noSuchScript(6), - accessDenied(7), - wrongLanguage(8), - wrongVersion(9), - compilationFailed(10), - noResourcesLeft(11), - unknownProtocol(12), - protocolFailure(13), - genericError(14) - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The actual status of the script in the runtime system. The - value of this object is only meaningful when the value of - the smScriptRowStatus object is `active'. - - The smScriptOperStatus object may have the following values: - - - `enabled' indicates that the script is available and can - be started by a launch table entry. - - - `disabled' indicates that the script can not be used. - - - `editing' indicates that the script can be modified in the - smCodeTable. - - - `retrieving' indicates that the script is currently being - loaded from non-volatile storage or a remote system. - - - `compiling' indicates that the script is currently being - compiled by the runtime system. - - - `noSuchScript' indicates that the script does not exist - at the smScriptSource. - - - `accessDenied' indicates that the script can not be loaded - from the smScriptSource due to a lack of permissions. - - - `wrongLanguage' indicates that the script can not be - loaded from the smScriptSource because of a language - mismatch. - - - `wrongVersion' indicates that the script can not be loaded - from the smScriptSource because of a language version - mismatch. - - - `compilationFailed' indicates that the compilation failed. - - - `noResourcesLeft' indicates that the runtime system does - not have enough resources to load the script. - - - `unknownProtocol' indicates that the script could not be - loaded from the smScriptSource because the requested - protocol is not supported. - - - `protocolFailure' indicates that the script could not be - loaded from the smScriptSource because of a protocol - failure. - - - `genericError' indicates that the script could not be - - loaded due to an error condition not listed above. - - The `retrieving' and `compiling' states are transient states - which will either lead to one of the error states or the - `enabled' state. The `disabled' and `editing' states are - administrative states which are only reached by explicit - management operations. - - All launch table entries that refer to this script table - entry shall have an smLaunchOperStatus value of `disabled' - when the value of this object is not `enabled'." - DEFVAL { disabled } - ::= { smScriptEntry 7 } - -smScriptStorageType OBJECT-TYPE - SYNTAX StorageType - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "This object defines whether this row and the script - controlled by this row are kept in volatile storage and - lost upon reboot or if this row is backed up by - non-volatile or permanent storage. - - The storage type of this row always complies with the value - of this entry if the value of the corresponding RowStatus - object is `active'. - - However, the storage type of the script controlled by this - row may be different, if the value of this entry is - `non-volatile'. The script controlled by this row is written - into local non-volatile storage if the following condition - becomes true: - - (a) the URL contained in the smScriptSource object is empty - and - (b) the smScriptStorageType is `nonVolatile' - and - (c) the smScriptOperStatus is `enabled' - - Setting this object to `volatile' removes a script from - non-volatile storage if the script controlled by this row - has been in non-volatile storage before. Attempts to set - this object to permanent will always fail with an - inconsistentValue error. - - The value of smScriptStorageType is only meaningful if the - value of the corresponding RowStatus object is `active'. - - If smScriptStorageType has the value permanent(4), then all - objects whose MAX-ACCESS value is read-create must be - writable, with the exception of the smScriptStorageType and - smScriptRowStatus objects, which shall be read-only." - DEFVAL { volatile } - ::= { smScriptEntry 8 } - -smScriptRowStatus OBJECT-TYPE - SYNTAX RowStatus - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "A control that allows entries to be added and removed from - this table. - - Changing the smScriptRowStatus from `active' to - `notInService' will remove the associated script from the - runtime system. - - Deleting conceptual rows from this table may affect the - deletion of other resources associated with this row. For - example, a script stored in non-volatile storage may be - removed from non-volatile storage. - - An entry may not exist in the `active' state unless all - required objects in the entry have appropriate values. Rows - that are not complete or not in service are not known by the - script runtime system. - - Attempts to `destroy' a row or to set a row `notInService' - while the smScriptOperStatus is `enabled' will result in an - inconsistentValue error. - - Attempts to `destroy' a row or to set a row `notInService' - where the value of the smScriptStorageType object is - `permanent' or `readOnly' will result in an - inconsistentValue error. - - The value of this object has no effect on whether other - objects in this conceptual row can be modified." - ::= { smScriptEntry 9 } - -smScriptError OBJECT-TYPE - SYNTAX SnmpAdminString - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This object contains a descriptive error message if the - - transition into the operational status `enabled' failed. - Implementations must reset the error message to a - zero-length string when a new attempt to change the - script status to `enabled' is started." - DEFVAL { ''H } - ::= { smScriptEntry 10 } - -smScriptLastChange OBJECT-TYPE - SYNTAX DateAndTime - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The date and time when this script table entry was last - modified. The value '0000000000000000'H is returned if - the script table entry has not yet been modified. - - Note that the resetting of smScriptError is not considered - a change of the script table entry." - DEFVAL { '0000000000000000'H } - ::= { smScriptEntry 11 } - --- --- Access to script code via SNMP --- --- The smCodeTable allows script code to be read and modified --- via SNMP. --- - -smCodeTable OBJECT-TYPE - SYNTAX SEQUENCE OF SmCodeEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "This table contains the script code for scripts that are - written via SNMP write operations." - ::= { smScriptObjects 2 } - -smCodeEntry OBJECT-TYPE - SYNTAX SmCodeEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "An entry describing a particular fragment of a script." - INDEX { smScriptOwner, smScriptName, smCodeIndex } - ::= { smCodeTable 1 } - -SmCodeEntry ::= SEQUENCE { - smCodeIndex Unsigned32, - smCodeText OCTET STRING, - smCodeRowStatus RowStatus -} - -smCodeIndex OBJECT-TYPE - SYNTAX Unsigned32 (1..4294967295) - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The index value identifying this code fragment." - ::= { smCodeEntry 1 } - -smCodeText OBJECT-TYPE - SYNTAX OCTET STRING (SIZE (1..1024)) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The code that makes up a fragment of a script. The format - of this code fragment depends on the script language which - is identified by the associated smScriptLanguage object." - ::= { smCodeEntry 2 } - -smCodeRowStatus OBJECT-TYPE - SYNTAX RowStatus - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "A control that allows entries to be added and removed from - this table. - - The value of this object has no effect on whether other - objects in this conceptual row can be modified." - ::= { smCodeEntry 3 } - --- --- Script execution. --- --- This group defines tables which allow script execution to be --- initiated, suspended, resumed, and terminated. It also provides --- a mechanism for keeping a history of recent script executions --- and their results. --- - -smRunObjects OBJECT IDENTIFIER ::= { smObjects 4 } - -smLaunchTable OBJECT-TYPE - SYNTAX SEQUENCE OF SmLaunchEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "This table lists and describes scripts that are ready - to be executed together with their parameters." - ::= { smRunObjects 1 } - -smLaunchEntry OBJECT-TYPE - SYNTAX SmLaunchEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "An entry describing a particular executable script." - INDEX { smLaunchOwner, smLaunchName } - ::= { smLaunchTable 1 } - -SmLaunchEntry ::= SEQUENCE { - smLaunchOwner SnmpAdminString, - smLaunchName SnmpAdminString, - smLaunchScriptOwner SnmpAdminString, - smLaunchScriptName SnmpAdminString, - smLaunchArgument OCTET STRING, - smLaunchMaxRunning Unsigned32, - smLaunchMaxCompleted Unsigned32, - smLaunchLifeTime TimeInterval, - smLaunchExpireTime TimeInterval, - smLaunchStart Integer32, - smLaunchControl INTEGER, - smLaunchAdminStatus INTEGER, - smLaunchOperStatus INTEGER, - smLaunchRunIndexNext Integer32, - smLaunchStorageType StorageType, - smLaunchRowStatus RowStatus, - smLaunchError SnmpAdminString, - smLaunchLastChange DateAndTime, - smLaunchRowExpireTime TimeInterval -} - -smLaunchOwner OBJECT-TYPE - SYNTAX SnmpAdminString (SIZE (0..32)) - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The manager who owns this row in the smLaunchTable. Every - instance of a running script started from a particular entry - in the smLaunchTable (i.e. entries in the smRunTable) will - be owned by the same smLaunchOwner used to index the entry - in the smLaunchTable. This owner is not necessarily the same - as the owner of the script itself (smLaunchScriptOwner)." - ::= { smLaunchEntry 1 } - -smLaunchName OBJECT-TYPE - SYNTAX SnmpAdminString (SIZE (1..32)) - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The locally-unique, administratively assigned name for this - launch table entry. This object allows an smLaunchOwner to - have multiple entries in the smLaunchTable. The smLaunchName - is an arbitrary name that must be different from any other - smLaunchTable entries with the same smLaunchOwner but can be - the same as other entries in the smLaunchTable with - different smLaunchOwner values. Note that the value of - smLaunchName is not related in any way to the name of the - script being launched." - ::= { smLaunchEntry 2 } - -smLaunchScriptOwner OBJECT-TYPE - SYNTAX SnmpAdminString (SIZE (0..32)) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The value of this object in combination with the value of - smLaunchScriptName identifies the script that can be - launched from this smLaunchTable entry. Attempts to write - this object will fail with an inconsistentValue error if - the value of smLaunchOperStatus is `enabled'." - ::= { smLaunchEntry 3 } - -smLaunchScriptName OBJECT-TYPE - SYNTAX SnmpAdminString (SIZE (0..32)) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The value of this object in combination with the value of - the smLaunchScriptOwner identifies the script that can be - launched from this smLaunchTable entry. The zero-length - string may be used to point to a non-existing script. - - Attempts to write this object will fail with an - inconsistentValue error if the value of smLaunchOperStatus - is `enabled'." - DEFVAL { ''H } - ::= { smLaunchEntry 4 } - -smLaunchArgument OBJECT-TYPE - SYNTAX OCTET STRING - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The argument supplied to the script. When a script is - invoked, the value of this object is used to initialize - the smRunArgument object." - DEFVAL { ''H } - ::= { smLaunchEntry 5 } - -smLaunchMaxRunning OBJECT-TYPE - SYNTAX Unsigned32 (1..4294967295) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The maximum number of concurrently running scripts that may - be invoked from this entry in the smLaunchTable. Lowering - the current value of this object does not affect any scripts - that are already executing." - DEFVAL { 1 } - ::= { smLaunchEntry 6 } - -smLaunchMaxCompleted OBJECT-TYPE - SYNTAX Unsigned32 (1..4294967295) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The maximum number of finished scripts invoked from this - entry in the smLaunchTable allowed to be retained in the - smRunTable. Whenever the value of this object is changed - and whenever a script terminates, entries in the smRunTable - are deleted if necessary until the number of completed - scripts is smaller than the value of this object. Scripts - whose smRunEndTime value indicates the oldest completion - time are deleted first." - DEFVAL { 1 } - ::= { smLaunchEntry 7 } - -smLaunchLifeTime OBJECT-TYPE - SYNTAX TimeInterval - UNITS "centi-seconds" - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The default maximum amount of time a script launched - from this entry may run. The value of this object is used - to initialize the smRunLifeTime object when a script is - launched. Changing the value of an smLaunchLifeTime - instance does not affect scripts previously launched from - - this entry." - DEFVAL { 360000 } - ::= { smLaunchEntry 8 } - -smLaunchExpireTime OBJECT-TYPE - SYNTAX TimeInterval - UNITS "centi-seconds" - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The default maximum amount of time information about a - script launched from this entry is kept in the smRunTable - after the script has completed execution. The value of - this object is used to initialize the smRunExpireTime - object when a script is launched. Changing the value of an - smLaunchExpireTime instance does not affect scripts - previously launched from this entry." - DEFVAL { 360000 } - ::= { smLaunchEntry 9 } - -smLaunchStart OBJECT-TYPE - SYNTAX Integer32 (0..2147483647) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "This object is used to start the execution of scripts. - When retrieved, the value will be the value of smRunIndex - for the last script that started execution by manipulating - this object. The value will be zero if no script started - execution yet. - - A script is started by setting this object to an unused - smRunIndex value. A new row in the smRunTable will be - created which is indexed by the value supplied by the - set-request in addition to the value of smLaunchOwner and - smLaunchName. An unused value can be obtained by reading - the smLaunchRunIndexNext object. - - Setting this object to the special value 0 will start - the script with a self-generated smRunIndex value. The - consequence is that the script invoker has no reliable - way to determine the smRunIndex value for this script - invocation and that the invoker has therefore no way - to obtain the results from this script invocation. The - special value 0 is however useful for scheduled script - invocations. - - If this object is set, the following checks must be - - performed: - - 1) The value of the smLaunchOperStatus object in this - entry of the smLaunchTable must be `enabled'. - 2) The values of smLaunchScriptOwner and - smLaunchScriptName of this row must identify an - existing entry in the smScriptTable. - 3) The value of smScriptOperStatus of this entry must - be `enabled'. - 4) The principal performing the set operation must have - read access to the script. This must be checked by - calling the isAccessAllowed abstract service interface - defined in RFC 2271 on the row in the smScriptTable - identified by smLaunchScriptOwner and smLaunchScriptName. - The isAccessAllowed abstract service interface must be - called on all columnar objects in the smScriptTable with - a MAX-ACCESS value different than `not-accessible'. The - test fails as soon as a call indicates that access is - not allowed. - 5) If the value provided by the set operation is not 0, - a check must be made that the value is currently not - in use. Otherwise, if the value provided by the set - operation is 0, a suitable unused value must be - generated. - 6) The number of currently executing scripts invoked - from this smLaunchTable entry must be less than - smLaunchMaxRunning. - - Attempts to start a script will fail with an - inconsistentValue error if one of the checks described - above fails. - - Otherwise, if all checks have been passed, a new entry - in the smRunTable will be created indexed by smLaunchOwner, - smLaunchName and the new value for smRunIndex. The value - of smLaunchArgument will be copied into smRunArgument, - the value of smLaunchLifeTime will be copied to - smRunLifeTime, and the value of smLaunchExpireTime - will be copied to smRunExpireTime. - - The smRunStartTime will be set to the current time and - the smRunState will be set to `initializing' before the - script execution is initiated in the appropriate runtime - system. - - Note that the data type and the range of this object must - be consistent with the smRunIndex object. Since this - object might be written from the scheduling MIB, the - - data type Integer32 rather than Unsigned32 is used." - DEFVAL { 0 } - ::= { smLaunchEntry 10 } - -smLaunchControl OBJECT-TYPE - SYNTAX INTEGER { - abort(1), - suspend(2), - resume(3), - nop(4) - } - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "This object is used to request a state change for all - running scripts in the smRunTable that were started from - this row in the smLaunchTable. - - Setting this object to abort(1), suspend(2) or resume(3) - will set the smRunControl object of all applicable rows - in the smRunTable to abort(1), suspend(2) or resume(3) - respectively. The phrase `applicable rows' means the set of - rows which were created from this entry in the smLaunchTable - and whose value of smRunState allows the corresponding - state change as described in the definition of the - smRunControl object. Setting this object to nop(4) has no - effect. - - Attempts to set this object lead to an inconsistentValue - error only if all implicated sets on all the applicable - rows lead to inconsistentValue errors. It is not allowed - to return an inconsistentValue error if at least one state - change on one of the applicable rows was successful." - DEFVAL { nop } - ::= { smLaunchEntry 11 } - -smLaunchAdminStatus OBJECT-TYPE - SYNTAX INTEGER { - enabled(1), - disabled(2), - autostart(3) - } - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The value of this object indicates the desired status of - this launch table entry. The values enabled(1) and - autostart(3) both indicate that the launch table entry - - should transition into the operational enabled(1) state as - soon as the associated script table entry is enabled(1). - - The value autostart(3) further indicates that the script - is started automatically by conceptually writing the - value 0 into the associated smLaunchStart object during - the transition from the `disabled' into the `enabled' - operational state. This is useful for scripts that are - to be launched on system start-up." - DEFVAL { disabled } - ::= { smLaunchEntry 12 } - -smLaunchOperStatus OBJECT-TYPE - SYNTAX INTEGER { - enabled(1), - disabled(2), - expired(3) - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The value of this object indicates the actual status of - this launch table entry. The smLaunchOperStatus object - may have the following values: - - - `enabled' indicates that the launch table entry is - available and can be used to start scripts. - - - `disabled' indicates that the launch table entry can - not be used to start scripts. - - - `expired' indicates that the launch table entry can - not be used to start scripts and will disappear as - soon as all smRunTable entries associated with this - launch table entry have disappeared. - - The value `enabled' requires that the smLaunchRowStatus - object is active. The value `disabled' requires that there - are no entries in the smRunTable associated with this - smLaunchTable entry." - DEFVAL { disabled } - ::= { smLaunchEntry 13 } - -smLaunchRunIndexNext OBJECT-TYPE - SYNTAX Integer32 (1..2147483647) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This variable is used for creating rows in the smRunTable. - The value of this variable is a currently unused value - for smRunIndex, which can be written into the smLaunchStart - object associated with this row to launch a script. - - The value returned when reading this variable must be unique - for the smLaunchOwner and smLaunchName associated with this - row. Subsequent attempts to read this variable must return - different values. - - This variable will return the special value 0 if no new rows - can be created. - - Note that the data type and the range of this object must be - consistent with the definition of smRunIndex." - ::= { smLaunchEntry 14 } - -smLaunchStorageType OBJECT-TYPE - SYNTAX StorageType - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "This object defines if this row is kept in volatile storage - and lost upon reboot or if this row is backed up by stable - storage. - - The value of smLaunchStorageType is only meaningful if the - value of the corresponding RowStatus object is active. - - If smLaunchStorageType has the value permanent(4), then all - objects whose MAX-ACCESS value is read-create must be - writable, with the exception of the smLaunchStorageType and - smLaunchRowStatus objects, which shall be read-only." - DEFVAL { volatile } - ::= { smLaunchEntry 15 } - -smLaunchRowStatus OBJECT-TYPE - SYNTAX RowStatus - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "A control that allows entries to be added and removed from - this table. - - Attempts to `destroy' a row or to set a row `notInService' - while the smLaunchOperStatus is `enabled' will result in - an inconsistentValue error. - - Attempts to `destroy' a row or to set a row `notInService' - where the value of the smLaunchStorageType object is - `permanent' or `readOnly' will result in an - inconsistentValue error. - - The value of this object has no effect on whether other - objects in this conceptual row can be modified." - ::= { smLaunchEntry 16 } - -smLaunchError OBJECT-TYPE - SYNTAX SnmpAdminString - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This object contains a descriptive error message if an - attempt to launch a script fails. Implementations must reset - the error message to a zero-length string when a new attempt - to launch a script is started." - DEFVAL { ''H } - ::= { smLaunchEntry 17 } - -smLaunchLastChange OBJECT-TYPE - SYNTAX DateAndTime - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The date and time when this launch table entry was last - modified. The value '0000000000000000'H is returned if - the launch table entry has not yet been modified. - - Note that a change of smLaunchStart, smLaunchControl, - smLaunchRunIndexNext, smLaunchRowExpireTime, or the - resetting of smLaunchError is not considered a change - of this launch table entry." - DEFVAL { '0000000000000000'H } - ::= { smLaunchEntry 18 } - -smLaunchRowExpireTime OBJECT-TYPE - SYNTAX TimeInterval - UNITS "centi-seconds" - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The value of this object specifies how long this row remains - in the `enabled' or `disabled' operational state. The value - reported by this object ticks backwards. When the value - reaches 0, it stops ticking backward and the row is - deleted if there are no smRunTable entries associated with - - this smLaunchTable entry. Otherwise, the smLaunchOperStatus - changes to `expired' and the row deletion is deferred - until there are no smRunTable entries associated with this - smLaunchTable entry. - - The smLaunchRowExpireTime will not tick backwards if it is - set to its maximum value (2147483647). In other words, - setting this object to its maximum value turns the timer - off. - - The value of this object may be set in order to increase - or reduce the remaining time that the launch table entry - may be used. Setting the value to 0 will cause an immediate - row deletion or transition into the `expired' operational - state. - - It is not possible to set this object while the operational - status is `expired'. Attempts to modify this object while - the operational status is `expired' leads to an - inconsistentValue error. - - Note that the timer ticks backwards independent of the - operational state of the launch table entry." - DEFVAL { 2147483647 } - ::= { smLaunchEntry 19 } - -smRunTable OBJECT-TYPE - SYNTAX SEQUENCE OF SmRunEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "This table lists and describes scripts that are currently - running or have been running in the past." - ::= { smRunObjects 2 } - -smRunEntry OBJECT-TYPE - SYNTAX SmRunEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "An entry describing a particular running or finished - script." - INDEX { smLaunchOwner, smLaunchName, smRunIndex } - ::= { smRunTable 1 } - -SmRunEntry ::= SEQUENCE { - smRunIndex Integer32, - smRunArgument OCTET STRING, - smRunStartTime DateAndTime, - smRunEndTime DateAndTime, - smRunLifeTime TimeInterval, - smRunExpireTime TimeInterval, - smRunExitCode INTEGER, - smRunResult OCTET STRING, - smRunControl INTEGER, - smRunState INTEGER, - smRunError SnmpAdminString, - smRunResultTime DateAndTime, - smRunErrorTime DateAndTime -} - -smRunIndex OBJECT-TYPE - SYNTAX Integer32 (1..2147483647) - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The locally arbitrary, but unique identifier associated - with this running or finished script. This value must be - unique for all rows in the smRunTable with the same - smLaunchOwner and smLaunchName. - - Note that the data type and the range of this object must - be consistent with the definition of smLaunchRunIndexNext - and smLaunchStart." - ::= { smRunEntry 1 } - -smRunArgument OBJECT-TYPE - SYNTAX OCTET STRING - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The argument supplied to the script when it started." - DEFVAL { ''H } - ::= { smRunEntry 2 } - -smRunStartTime OBJECT-TYPE - SYNTAX DateAndTime - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The date and time when the execution started. The value - '0000000000000000'H is returned if the script has not - started yet." - DEFVAL { '0000000000000000'H } - ::= { smRunEntry 3 } - -smRunEndTime OBJECT-TYPE - SYNTAX DateAndTime - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The date and time when the execution terminated. The value - '0000000000000000'H is returned if the script has not - terminated yet." - DEFVAL { '0000000000000000'H } - ::= { smRunEntry 4 } - -smRunLifeTime OBJECT-TYPE - SYNTAX TimeInterval - UNITS "centi-seconds" - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "This object specifies how long the script can execute. - This object returns the remaining time that the script - may run. The object is initialized with the value of the - associated smLaunchLifeTime object and ticks backwards. - The script is aborted immediately when the value reaches 0. - - The value of this object may be set in order to increase or - reduce the remaining time that the script may run. Setting - this value to 0 will abort script execution immediately, - and, if the value of smRunExpireTime is also 0, will remove - this entry from the smRunTable once it has terminated. - - If smRunLifeTime is set to its maximum value (2147483647), - either by a set operation or by its initialization from the - smLaunchLifeTime object, then it will not tick backwards. - A running script with a maximum smRunLifeTime value will - thus never be terminated with a `lifeTimeExceeded' exit - code. - - The value of smRunLifeTime reflects the real-time execution - time as seen by the outside world. The value of this object - will always be 0 for a script that finished execution, that - is smRunState has the value `terminated'. - - The value of smRunLifeTime does not change while a script - is suspended, that is smRunState has the value `suspended'. - Note that this does not affect set operations. It is legal - to modify smRunLifeTime via set operations while a script - is suspended." - ::= { smRunEntry 5 } - -smRunExpireTime OBJECT-TYPE - SYNTAX TimeInterval - UNITS "centi-seconds" - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "The value of this object specifies how long this row can - exist in the smRunTable after the script has terminated. - This object returns the remaining time that the row may - exist before it is aged out. The object is initialized with - the value of the associated smLaunchExpireTime object and - ticks backwards. The entry in the smRunTable is destroyed - when the value reaches 0 and the smRunState has the value - `terminated'. - - The value of this object may be set in order to increase or - reduce the remaining time that the row may exist. Setting - the value to 0 will destroy this entry as soon as the - smRunState has the value `terminated'." - ::= { smRunEntry 6 } - -smRunExitCode OBJECT-TYPE - SYNTAX INTEGER { - noError(1), - halted(2), - lifeTimeExceeded(3), - noResourcesLeft(4), - languageError(5), - runtimeError(6), - invalidArgument(7), - securityViolation(8), - genericError(9) - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The value of this object indicates the reason why a - script finished execution. The smRunExitCode code may have - one of the following values: - - - `noError', which indicates that the script completed - successfully without errors; - - - `halted', which indicates that the script was halted - by a request from an authorized manager; - - - `lifeTimeExceeded', which indicates that the script - exited because a time limit was exceeded; - - - `noResourcesLeft', which indicates that the script - exited because it ran out of resources (e.g. memory); - - - `languageError', which indicates that the script exited - because of a language error (e.g. a syntax error in an - interpreted language); - - - `runtimeError', which indicates that the script exited - due to a runtime error (e.g. a division by zero); - - - `invalidArgument', which indicates that the script could - not be run because of invalid script arguments; - - - `securityViolation', which indicates that the script - exited due to a security violation; - - - `genericError', which indicates that the script exited - for an unspecified reason. - - If the script has not yet begun running, or is currently - running, the value will be `noError'." - DEFVAL { noError } - ::= { smRunEntry 7 } - -smRunResult OBJECT-TYPE - SYNTAX OCTET STRING - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The result value produced by the running script. Note that - the result may change while the script is executing." - DEFVAL { ''H } - ::= { smRunEntry 8 } - -smRunControl OBJECT-TYPE - SYNTAX INTEGER { - abort(1), - suspend(2), - resume(3), - nop(4) - } - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "The value of this object indicates the desired status of the - script execution defined by this row. - - Setting this object to `abort' will abort execution if the - - value of smRunState is `initializing', `executing', - `suspending', `suspended' or `resuming'. Setting this object - to `abort' when the value of smRunState is `aborting' or - `terminated', or if the implementation can determine that - the attempt to abort the execution would fail, will result - in an inconsistentValue error. - - Setting this object to `suspend' will suspend execution - if the value of smRunState is `executing'. Setting this - object to `suspend' will cause an inconsistentValue error - if the value of smRunState is not `executing' or if the - implementation can determine that the attempt to suspend - the execution would fail. - - Setting this object to `resume' will resume execution - if the value of smRunState is `suspending' or - `suspended'. Setting this object to `resume' will cause an - inconsistentValue error if the value of smRunState is - not `suspended' or if the implementation can determine - that the attempt to resume the execution would fail. - - Setting this object to nop(4) has no effect." - DEFVAL { nop } - ::= { smRunEntry 9 } - -smRunState OBJECT-TYPE - SYNTAX INTEGER { - initializing(1), - executing(2), - suspending(3), - suspended(4), - resuming(5), - aborting(6), - terminated(7) - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The value of this object indicates the script's execution - state. If the script has been invoked but has not yet - begun execution, the value will be `initializing'. If the - script is running, the value will be `executing'. - - A running script which received a request to suspend - execution first transitions into a temporary `suspending' - state. The temporary `suspending' state changes to - `suspended' when the script has actually been suspended. The - temporary `suspending' state changes back to `executing' if - - the attempt to suspend the running script fails. - - A suspended script which received a request to resume - execution first transitions into a temporary `resuming' - state. The temporary `resuming' state changes to `running' - when the script has actually been resumed. The temporary - `resuming' state changes back to `suspended' if the attempt - to resume the suspended script fails. - - A script which received a request to abort execution but - which is still running first transitions into a temporary - `aborting' state. - - A script which has finished its execution is `terminated'." - ::= { smRunEntry 10 } - -smRunError OBJECT-TYPE - SYNTAX SnmpAdminString - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This object contains a descriptive error message if the - script startup or execution raised an abnormal condition. - An implementation must store a descriptive error message - in this object if the script exits with the smRunExitCode - `genericError'." - DEFVAL { ''H } - ::= { smRunEntry 11 } - -smRunResultTime OBJECT-TYPE - SYNTAX DateAndTime - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The date and time when the smRunResult was last updated. - The value '0000000000000000'H is returned if smRunResult - has not yet been updated after the creation of this - smRunTable entry." - DEFVAL { '0000000000000000'H } - ::= { smRunEntry 12 } - -smRunErrorTime OBJECT-TYPE - SYNTAX DateAndTime - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The date and time when the smRunError was last updated. - The value '0000000000000000'H is returned if smRunError - - has not yet been updated after the creation of this - smRunTable entry." - DEFVAL { '0000000000000000'H } - ::= { smRunEntry 13 } - --- --- Notifications. The definition of smTraps makes notification --- registrations reversible (see STD 58, RFC 2578). --- - -smTraps OBJECT IDENTIFIER ::= { smNotifications 0 } - -smScriptAbort NOTIFICATION-TYPE - OBJECTS { smRunExitCode, smRunEndTime, smRunError } - STATUS current - DESCRIPTION - "This notification is generated whenever a running script - terminates with an smRunExitCode unequal to `noError'." - ::= { smTraps 1 } - -smScriptResult NOTIFICATION-TYPE - OBJECTS { smRunResult } - STATUS current - DESCRIPTION - "This notification can be used by scripts to notify other - management applications about results produced by the - script. - - This notification is not automatically generated by the - Script MIB implementation. It is the responsibility of - the executing script to emit this notification where it - is appropriate to do so." - ::= { smTraps 2 } - -smScriptException NOTIFICATION-TYPE - OBJECTS { smRunError } - STATUS current - DESCRIPTION - "This notification can be used by scripts to notify other - management applications about script errors. - - This notification is not automatically generated by the - Script MIB implementation. It is the responsibility of - the executing script or the runtime system to emit this - notification where it is appropriate to do so." - ::= { smTraps 3 } - --- conformance information - -smCompliances OBJECT IDENTIFIER ::= { smConformance 1 } -smGroups OBJECT IDENTIFIER ::= { smConformance 2 } - --- compliance statements - -smCompliance2 MODULE-COMPLIANCE - STATUS current - DESCRIPTION - "The compliance statement for SNMP entities which implement - the Script MIB." - MODULE -- this module - MANDATORY-GROUPS { - smLanguageGroup, smScriptGroup2, smLaunchGroup2, - smRunGroup2, smNotificationsGroup2 - } - GROUP smCodeGroup - DESCRIPTION - "The smCodeGroup is mandatory only for those implementations - that support the downloading of scripts via SNMP." - OBJECT smScriptSource - MIN-ACCESS read-only - DESCRIPTION - "The smScriptSource object is read-only for implementations - that are not able to download script code from a URL." - OBJECT smCodeText - DESCRIPTION - "A compliant implementation need only support write access to - the smCodeText object only during row creation." - OBJECT smLaunchArgument - DESCRIPTION - "A compliant implementation has to support a minimum size - for smLaunchArgument of 255 octets." - OBJECT smRunArgument - DESCRIPTION - "A compliant implementation has to support a minimum size - for smRunArgument of 255 octets." - OBJECT smRunResult - DESCRIPTION - "A compliant implementation has to support a minimum size - for smRunResult of 255 octets." - OBJECT smRunState - DESCRIPTION - "A compliant implementation does not have to support script - suspension and the smRunState `suspended'. Such an - implementation will change into the `suspending' state - when the smRunControl is set to `suspend' and remain in this - state until smRunControl is set to `resume' or the script - terminates." - ::= { smCompliances 2 } - -smLanguageGroup OBJECT-GROUP - OBJECTS { - smLangLanguage, smLangVersion, - smLangVendor, smLangRevision, - smLangDescr, smExtsnExtension, - smExtsnVersion, smExtsnVendor, - smExtsnRevision, smExtsnDescr - } - STATUS current - DESCRIPTION - "A collection of objects providing information about the - capabilities of the scripting engine." - ::= { smGroups 1 } - -smScriptGroup2 OBJECT-GROUP - OBJECTS { - smScriptDescr, smScriptLanguage, - smScriptSource, smScriptAdminStatus, - smScriptOperStatus, smScriptStorageType, - smScriptRowStatus, smScriptError, - smScriptLastChange - } - STATUS current - DESCRIPTION - "A collection of objects providing information about - installed scripts." - ::= { smGroups 7 } - -smCodeGroup OBJECT-GROUP - OBJECTS { - smCodeText, smCodeRowStatus - } - STATUS current - DESCRIPTION - "A collection of objects used to download or modify scripts - by using SNMP set requests." - ::= { smGroups 3 } - -smLaunchGroup2 OBJECT-GROUP - OBJECTS { - smLaunchScriptOwner, smLaunchScriptName, - smLaunchArgument, smLaunchMaxRunning, - smLaunchMaxCompleted, smLaunchLifeTime, - smLaunchExpireTime, smLaunchStart, - smLaunchControl, smLaunchAdminStatus, - smLaunchOperStatus, smLaunchRunIndexNext, - smLaunchStorageType, smLaunchRowStatus, - smLaunchError, smLaunchLastChange, - smLaunchRowExpireTime - } - STATUS current - DESCRIPTION - "A collection of objects providing information about scripts - that can be launched." - ::= { smGroups 8 } - -smRunGroup2 OBJECT-GROUP - OBJECTS { - smRunArgument, smRunStartTime, - smRunEndTime, smRunLifeTime, - smRunExpireTime, smRunExitCode, - smRunResult, smRunState, - smRunControl, smRunError, - smRunResultTime, smRunErrorTime - } - STATUS current - DESCRIPTION - "A collection of objects providing information about running - scripts." - ::= { smGroups 9 } - -smNotificationsGroup2 NOTIFICATION-GROUP - NOTIFICATIONS { - smScriptAbort, - smScriptResult, - smScriptException - } - STATUS current - DESCRIPTION - "The notifications emitted by the Script MIB." - ::= { smGroups 10 } - --- --- Deprecated compliance and conformance group definitions --- from RFC 2592. --- - -smCompliance MODULE-COMPLIANCE - STATUS deprecated - DESCRIPTION - "The compliance statement for SNMP entities which implement - the Script MIB." - MODULE -- this module - MANDATORY-GROUPS { - - smLanguageGroup, smScriptGroup, smLaunchGroup, smRunGroup - } - GROUP smCodeGroup - DESCRIPTION - "The smCodeGroup is mandatory only for those implementations - that support the downloading of scripts via SNMP." - OBJECT smScriptSource - MIN-ACCESS read-only - DESCRIPTION - "The smScriptSource object is read-only for implementations - that are not able to download script code from a URL." - OBJECT smCodeText - DESCRIPTION - "A compliant implementation need only support write access - to the smCodeText object during row creation." - OBJECT smLaunchArgument - DESCRIPTION - "A compliant implementation has to support a minimum size - for smLaunchArgument of 255 octets." - OBJECT smRunArgument - DESCRIPTION - "A compliant implementation has to support a minimum size - for smRunArgument of 255 octets." - OBJECT smRunResult - DESCRIPTION - "A compliant implementation has to support a minimum size - for smRunResult of 255 octets." - OBJECT smRunState - DESCRIPTION - "A compliant implementation does not have to support script - suspension and the smRunState `suspended'. Such an - implementation will change into the `suspending' state - when the smRunControl is set to `suspend' and remain in this - state until smRunControl is set to `resume' or the script - terminates." - ::= { smCompliances 1 } - -smScriptGroup OBJECT-GROUP - OBJECTS { - smScriptDescr, smScriptLanguage, - smScriptSource, smScriptAdminStatus, - smScriptOperStatus, smScriptStorageType, - smScriptRowStatus - } - STATUS deprecated - DESCRIPTION - "A collection of objects providing information about - installed scripts." - ::= { smGroups 2 } - -smLaunchGroup OBJECT-GROUP - OBJECTS { - smLaunchScriptOwner, smLaunchScriptName, - smLaunchArgument, smLaunchMaxRunning, - smLaunchMaxCompleted, smLaunchLifeTime, - smLaunchExpireTime, smLaunchStart, - smLaunchControl, smLaunchAdminStatus, - smLaunchOperStatus, smLaunchRunIndexNext, - smLaunchStorageType, smLaunchRowStatus - } - STATUS deprecated - DESCRIPTION - "A collection of objects providing information about scripts - that can be launched." - ::= { smGroups 4 } - -smRunGroup OBJECT-GROUP - OBJECTS { - smRunArgument, smRunStartTime, - smRunEndTime, smRunLifeTime, - smRunExpireTime, smRunExitCode, - smRunResult, smRunState, - smRunControl, smRunError - } - STATUS deprecated - DESCRIPTION - "A collection of objects providing information about running - scripts." - ::= { smGroups 5 } - -smNotificationsGroup NOTIFICATION-GROUP - NOTIFICATIONS { - smScriptAbort, - smScriptResult - } - STATUS deprecated - DESCRIPTION - "The notifications emitted by the Script MIB." - ::= { smGroups 6 } - -END |