diff options
Diffstat (limited to 'data/mibs/HOST-RESOURCES-MIB.txt')
| -rw-r--r-- | data/mibs/HOST-RESOURCES-MIB.txt | 1540 |
1 files changed, 0 insertions, 1540 deletions
diff --git a/data/mibs/HOST-RESOURCES-MIB.txt b/data/mibs/HOST-RESOURCES-MIB.txt deleted file mode 100644 index 373b9b328..000000000 --- a/data/mibs/HOST-RESOURCES-MIB.txt +++ /dev/null @@ -1,1540 +0,0 @@ -HOST-RESOURCES-MIB DEFINITIONS ::= BEGIN - -IMPORTS -MODULE-IDENTITY, OBJECT-TYPE, mib-2, -Integer32, Counter32, Gauge32, TimeTicks FROM SNMPv2-SMI - -TEXTUAL-CONVENTION, DisplayString, -TruthValue, DateAndTime, AutonomousType FROM SNMPv2-TC - -MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF - -InterfaceIndexOrZero FROM IF-MIB; - -hostResourcesMibModule MODULE-IDENTITY - LAST-UPDATED "200003060000Z" -- 6 March 2000 - ORGANIZATION "IETF Host Resources MIB Working Group" - CONTACT-INFO - "Steve Waldbusser - Postal: Lucent Technologies, Inc. - 1213 Innsbruck Dr. - Sunnyvale, CA 94089 - USA - Phone: 650-318-1251 - Fax: 650-318-1633 - Email: waldbusser@lucent.com - - In addition, the Host Resources MIB mailing list is - dedicated to discussion of this MIB. To join the - mailing list, send a request message to - hostmib-request@andrew.cmu.edu. The mailing list - address is hostmib@andrew.cmu.edu." - DESCRIPTION - "This MIB is for use in managing host systems. The term - `host' is construed to mean any computer that communicates - with other similar computers attached to the internet and - that is directly used by one or more human beings. Although - this MIB does not necessarily apply to devices whose primary - function is communications services (e.g., terminal servers, - routers, bridges, monitoring equipment), such relevance is - not explicitly precluded. This MIB instruments attributes - common to all internet hosts including, for example, both - personal computers and systems that run variants of Unix." - - REVISION "200003060000Z" -- 6 March 2000 - DESCRIPTION - "Clarifications and bug fixes based on implementation - experience. This revision was also reformatted in the SMIv2 - format. The revisions made were: - - New RFC document standards: - Added Copyright notice, updated introduction to SNMP - Framework, updated references section, added reference to - RFC 2119, and added a meaningful Security Considerations - section. - - New IANA considerations section for registration of new types - - Conversion to new SMIv2 syntax for the following types and - macros: - Counter32, Integer32, Gauge32, MODULE-IDENTITY, - OBJECT-TYPE, TEXTUAL-CONVENTION, OBJECT-IDENTITY, - MODULE-COMPLIANCE, OBJECT-GROUP - - Used new Textual Conventions: - TruthValue, DateAndTime, AutonomousType, - InterfaceIndexOrZero - - Fixed typo in hrPrinterStatus. - - Added missing error bits to hrPrinterDetectedErrorState and - clarified confusion resulting from suggested mappings to - hrPrinterStatus. - - Clarified that size of objects of type - InternationalDisplayString is number of octets, not number - of encoded symbols. - - Clarified the use of the following objects based on - implementation experience: - hrSystemInitialLoadDevice, hrSystemInitialLoadParameters, - hrMemorySize, hrStorageSize, hrStorageAllocationFailures, - hrDeviceErrors, hrProcessorLoad, hrNetworkIfIndex, - hrDiskStorageCapacity, hrSWRunStatus, hrSWRunPerfCPU, - and hrSWInstalledDate. - - Clarified implementation technique for hrSWInstalledTable. - - Used new AUGMENTS clause for hrSWRunPerfTable. - - Added Internationalization Considerations section. - -This revision published as RFC2790." - - REVISION "9910202200Z" -- 20 October, 1999 - DESCRIPTION - "The original version of this MIB, published as - RFC1514." - ::= { hrMIBAdminInfo 1 } - -host OBJECT IDENTIFIER ::= { mib-2 25 } - -hrSystem OBJECT IDENTIFIER ::= { host 1 } -hrStorage OBJECT IDENTIFIER ::= { host 2 } -hrDevice OBJECT IDENTIFIER ::= { host 3 } -hrSWRun OBJECT IDENTIFIER ::= { host 4 } -hrSWRunPerf OBJECT IDENTIFIER ::= { host 5 } -hrSWInstalled OBJECT IDENTIFIER ::= { host 6 } -hrMIBAdminInfo OBJECT IDENTIFIER ::= { host 7 } - --- textual conventions - -KBytes ::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION - "Storage size, expressed in units of 1024 bytes." - SYNTAX Integer32 (0..2147483647) - -ProductID ::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION - "This textual convention is intended to identify the - - manufacturer, model, and version of a specific - hardware or software product. It is suggested that - these OBJECT IDENTIFIERs are allocated such that all - products from a particular manufacturer are registered - under a subtree distinct to that manufacturer. In - addition, all versions of a product should be - registered under a subtree distinct to that product. - With this strategy, a management station may uniquely - determine the manufacturer and/or model of a product - whose productID is unknown to the management station. - Objects of this type may be useful for inventory - purposes or for automatically detecting - incompatibilities or version mismatches between - various hardware and software components on a system. - - For example, the product ID for the ACME 4860 66MHz - clock doubled processor might be: - enterprises.acme.acmeProcessors.a4860DX2.MHz66 - - A software product might be registered as: - enterprises.acme.acmeOperatingSystems.acmeDOS.six(6).one(1) - " - SYNTAX OBJECT IDENTIFIER - --- unknownProduct will be used for any unknown ProductID --- unknownProduct OBJECT IDENTIFIER ::= { 0 0 } - -InternationalDisplayString ::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION - "This data type is used to model textual information - in some character set. A network management station - should use a local algorithm to determine which - character set is in use and how it should be - displayed. Note that this character set may be - encoded with more than one octet per symbol, but will - most often be NVT ASCII. When a size clause is - specified for an object of this type, the size refers - to the length in octets, not the number of symbols." - SYNTAX OCTET STRING - --- The Host Resources System Group - -hrSystemUptime OBJECT-TYPE - SYNTAX TimeTicks - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The amount of time since this host was last - initialized. Note that this is different from - sysUpTime in the SNMPv2-MIB [RFC1907] because - sysUpTime is the uptime of the network management - portion of the system." - ::= { hrSystem 1 } - -hrSystemDate OBJECT-TYPE - SYNTAX DateAndTime - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "The host's notion of the local date and time of day." - ::= { hrSystem 2 } - -hrSystemInitialLoadDevice OBJECT-TYPE - SYNTAX Integer32 (1..2147483647) - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "The index of the hrDeviceEntry for the device from - which this host is configured to load its initial - operating system configuration (i.e., which operating - system code and/or boot parameters). - - Note that writing to this object just changes the - configuration that will be used the next time the - operating system is loaded and does not actually cause - the reload to occur." - ::= { hrSystem 3 } - -hrSystemInitialLoadParameters OBJECT-TYPE - SYNTAX InternationalDisplayString (SIZE (0..128)) - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "This object contains the parameters (e.g. a pathname - and parameter) supplied to the load device when - requesting the initial operating system configuration - from that device. - - Note that writing to this object just changes the - configuration that will be used the next time the - operating system is loaded and does not actually cause - the reload to occur." - ::= { hrSystem 4 } - -hrSystemNumUsers OBJECT-TYPE - SYNTAX Gauge32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of user sessions for which this host is - storing state information. A session is a collection - of processes requiring a single act of user - authentication and possibly subject to collective job - control." - ::= { hrSystem 5 } - -hrSystemProcesses OBJECT-TYPE - SYNTAX Gauge32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of process contexts currently loaded or - running on this system." - ::= { hrSystem 6 } - -hrSystemMaxProcesses OBJECT-TYPE - SYNTAX Integer32 (0..2147483647) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The maximum number of process contexts this system - can support. If there is no fixed maximum, the value - should be zero. On systems that have a fixed maximum, - this object can help diagnose failures that occur when - this maximum is reached." - ::= { hrSystem 7 } - --- The Host Resources Storage Group - --- Registration point for storage types, for use with hrStorageType. --- These are defined in the HOST-RESOURCES-TYPES module. -hrStorageTypes OBJECT IDENTIFIER ::= { hrStorage 1 } - -hrMemorySize OBJECT-TYPE - SYNTAX KBytes - UNITS "KBytes" - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The amount of physical read-write main memory, - typically RAM, contained by the host." - ::= { hrStorage 2 } - -hrStorageTable OBJECT-TYPE - SYNTAX SEQUENCE OF HrStorageEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The (conceptual) table of logical storage areas on - the host. - - An entry shall be placed in the storage table for each - logical area of storage that is allocated and has - fixed resource limits. The amount of storage - represented in an entity is the amount actually usable - by the requesting entity, and excludes loss due to - formatting or file system reference information. - - These entries are associated with logical storage - areas, as might be seen by an application, rather than - physical storage entities which are typically seen by - an operating system. Storage such as tapes and - floppies without file systems on them are typically - not allocated in chunks by the operating system to - requesting applications, and therefore shouldn't - appear in this table. Examples of valid storage for - this table include disk partitions, file systems, ram - (for some architectures this is further segmented into - regular memory, extended memory, and so on), backing - store for virtual memory (`swap space'). - - This table is intended to be a useful diagnostic for - `out of memory' and `out of buffers' types of - failures. In addition, it can be a useful performance - monitoring tool for tracking memory, disk, or buffer - usage." - ::= { hrStorage 3 } - -hrStorageEntry OBJECT-TYPE - SYNTAX HrStorageEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A (conceptual) entry for one logical storage area on - the host. As an example, an instance of the - hrStorageType object might be named hrStorageType.3" - INDEX { hrStorageIndex } - ::= { hrStorageTable 1 } - -HrStorageEntry ::= SEQUENCE { - hrStorageIndex Integer32, - hrStorageType AutonomousType, - hrStorageDescr DisplayString, - hrStorageAllocationUnits Integer32, - hrStorageSize Integer32, - hrStorageUsed Integer32, - hrStorageAllocationFailures Counter32 - } - -hrStorageIndex OBJECT-TYPE - SYNTAX Integer32 (1..2147483647) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A unique value for each logical storage area - contained by the host." - ::= { hrStorageEntry 1 } - -hrStorageType OBJECT-TYPE - SYNTAX AutonomousType - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The type of storage represented by this entry." - ::= { hrStorageEntry 2 } - -hrStorageDescr OBJECT-TYPE - SYNTAX DisplayString - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A description of the type and instance of the storage - described by this entry." - ::= { hrStorageEntry 3 } - -hrStorageAllocationUnits OBJECT-TYPE - SYNTAX Integer32 (1..2147483647) - UNITS "Bytes" - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The size, in bytes, of the data objects allocated - from this pool. If this entry is monitoring sectors, - blocks, buffers, or packets, for example, this number - will commonly be greater than one. Otherwise this - number will typically be one." - ::= { hrStorageEntry 4 } - -hrStorageSize OBJECT-TYPE - SYNTAX Integer32 (0..2147483647) - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "The size of the storage represented by this entry, in - units of hrStorageAllocationUnits. This object is - writable to allow remote configuration of the size of - the storage area in those cases where such an - operation makes sense and is possible on the - underlying system. For example, the amount of main - memory allocated to a buffer pool might be modified or - the amount of disk space allocated to virtual memory - might be modified." - ::= { hrStorageEntry 5 } - -hrStorageUsed OBJECT-TYPE - SYNTAX Integer32 (0..2147483647) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The amount of the storage represented by this entry - that is allocated, in units of - hrStorageAllocationUnits." - ::= { hrStorageEntry 6 } - -hrStorageAllocationFailures OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of requests for storage represented by - this entry that could not be honored due to not enough - storage. It should be noted that as this object has a - SYNTAX of Counter32, that it does not have a defined - initial value. However, it is recommended that this - object be initialized to zero, even though management - stations must not depend on such an initialization." - ::= { hrStorageEntry 7 } - --- The Host Resources Device Group --- --- The device group is useful for identifying and diagnosing the --- devices on a system. The hrDeviceTable contains common --- information for any type of device. In addition, some devices --- have device-specific tables for more detailed information. More --- such tables may be defined in the future for other device types. - --- Registration point for device types, for use with hrDeviceType. - --- These are defined in the HOST-RESOURCES-TYPES module. -hrDeviceTypes OBJECT IDENTIFIER ::= { hrDevice 1 } - -hrDeviceTable OBJECT-TYPE - SYNTAX SEQUENCE OF HrDeviceEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The (conceptual) table of devices contained by the - host." - ::= { hrDevice 2 } - -hrDeviceEntry OBJECT-TYPE - SYNTAX HrDeviceEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A (conceptual) entry for one device contained by the - host. As an example, an instance of the hrDeviceType - object might be named hrDeviceType.3" - INDEX { hrDeviceIndex } - ::= { hrDeviceTable 1 } - -HrDeviceEntry ::= SEQUENCE { - hrDeviceIndex Integer32, - hrDeviceType AutonomousType, - hrDeviceDescr DisplayString, - hrDeviceID ProductID, - hrDeviceStatus INTEGER, - hrDeviceErrors Counter32 - } - -hrDeviceIndex OBJECT-TYPE - SYNTAX Integer32 (1..2147483647) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A unique value for each device contained by the host. - The value for each device must remain constant at - least from one re-initialization of the agent to the - next re-initialization." - ::= { hrDeviceEntry 1 } - -hrDeviceType OBJECT-TYPE - SYNTAX AutonomousType - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "An indication of the type of device. - - If this value is - `hrDeviceProcessor { hrDeviceTypes 3 }' then an entry - exists in the hrProcessorTable which corresponds to - this device. - - If this value is - `hrDeviceNetwork { hrDeviceTypes 4 }', then an entry - exists in the hrNetworkTable which corresponds to this - device. - - If this value is - `hrDevicePrinter { hrDeviceTypes 5 }', then an entry - exists in the hrPrinterTable which corresponds to this - device. - - If this value is - `hrDeviceDiskStorage { hrDeviceTypes 6 }', then an - entry exists in the hrDiskStorageTable which - corresponds to this device." - ::= { hrDeviceEntry 2 } - -hrDeviceDescr OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..64)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A textual description of this device, including the - device's manufacturer and revision, and optionally, - its serial number." - ::= { hrDeviceEntry 3 } - -hrDeviceID OBJECT-TYPE - SYNTAX ProductID - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The product ID for this device." - ::= { hrDeviceEntry 4 } - -hrDeviceStatus OBJECT-TYPE - SYNTAX INTEGER { - unknown(1), - running(2), - warning(3), - testing(4), - down(5) - - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The current operational state of the device described - by this row of the table. A value unknown(1) - indicates that the current state of the device is - unknown. running(2) indicates that the device is up - and running and that no unusual error conditions are - known. The warning(3) state indicates that agent has - been informed of an unusual error condition by the - operational software (e.g., a disk device driver) but - that the device is still 'operational'. An example - would be a high number of soft errors on a disk. A - value of testing(4), indicates that the device is not - available for use because it is in the testing state. - The state of down(5) is used only when the agent has - been informed that the device is not available for any - use." - ::= { hrDeviceEntry 5 } - -hrDeviceErrors OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of errors detected on this device. It - should be noted that as this object has a SYNTAX of - Counter32, that it does not have a defined initial - value. However, it is recommended that this object be - initialized to zero, even though management stations - must not depend on such an initialization." - ::= { hrDeviceEntry 6 } - -hrProcessorTable OBJECT-TYPE - SYNTAX SEQUENCE OF HrProcessorEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The (conceptual) table of processors contained by the - host. - - Note that this table is potentially sparse: a - (conceptual) entry exists only if the correspondent - value of the hrDeviceType object is - `hrDeviceProcessor'." - ::= { hrDevice 3 } - -hrProcessorEntry OBJECT-TYPE - SYNTAX HrProcessorEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A (conceptual) entry for one processor contained by - the host. The hrDeviceIndex in the index represents - the entry in the hrDeviceTable that corresponds to the - hrProcessorEntry. - - As an example of how objects in this table are named, - an instance of the hrProcessorFrwID object might be - named hrProcessorFrwID.3" - INDEX { hrDeviceIndex } - ::= { hrProcessorTable 1 } - -HrProcessorEntry ::= SEQUENCE { - hrProcessorFrwID ProductID, - hrProcessorLoad Integer32 - } - -hrProcessorFrwID OBJECT-TYPE - SYNTAX ProductID - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The product ID of the firmware associated with the - processor." - ::= { hrProcessorEntry 1 } - -hrProcessorLoad OBJECT-TYPE - SYNTAX Integer32 (0..100) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The average, over the last minute, of the percentage - of time that this processor was not idle. - Implementations may approximate this one minute - smoothing period if necessary." - ::= { hrProcessorEntry 2 } - -hrNetworkTable OBJECT-TYPE - SYNTAX SEQUENCE OF HrNetworkEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The (conceptual) table of network devices contained - by the host. - - Note that this table is potentially sparse: a - (conceptual) entry exists only if the correspondent - value of the hrDeviceType object is - `hrDeviceNetwork'." - ::= { hrDevice 4 } - -hrNetworkEntry OBJECT-TYPE - SYNTAX HrNetworkEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A (conceptual) entry for one network device contained - by the host. The hrDeviceIndex in the index - represents the entry in the hrDeviceTable that - corresponds to the hrNetworkEntry. - - As an example of how objects in this table are named, - an instance of the hrNetworkIfIndex object might be - named hrNetworkIfIndex.3" - INDEX { hrDeviceIndex } - ::= { hrNetworkTable 1 } - -HrNetworkEntry ::= SEQUENCE { - hrNetworkIfIndex InterfaceIndexOrZero - } - -hrNetworkIfIndex OBJECT-TYPE - SYNTAX InterfaceIndexOrZero - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The value of ifIndex which corresponds to this - network device. If this device is not represented in - the ifTable, then this value shall be zero." - ::= { hrNetworkEntry 1 } - -hrPrinterTable OBJECT-TYPE - SYNTAX SEQUENCE OF HrPrinterEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The (conceptual) table of printers local to the host. - - Note that this table is potentially sparse: a - (conceptual) entry exists only if the correspondent - value of the hrDeviceType object is - `hrDevicePrinter'." - ::= { hrDevice 5 } - -hrPrinterEntry OBJECT-TYPE - SYNTAX HrPrinterEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A (conceptual) entry for one printer local to the - host. The hrDeviceIndex in the index represents the - entry in the hrDeviceTable that corresponds to the - hrPrinterEntry. - - As an example of how objects in this table are named, - an instance of the hrPrinterStatus object might be - named hrPrinterStatus.3" - INDEX { hrDeviceIndex } - ::= { hrPrinterTable 1 } - -HrPrinterEntry ::= SEQUENCE { - hrPrinterStatus INTEGER, - hrPrinterDetectedErrorState OCTET STRING - } - -hrPrinterStatus OBJECT-TYPE - SYNTAX INTEGER { - other(1), - unknown(2), - idle(3), - printing(4), - warmup(5) - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The current status of this printer device." - ::= { hrPrinterEntry 1 } - -hrPrinterDetectedErrorState OBJECT-TYPE - SYNTAX OCTET STRING - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This object represents any error conditions detected - by the printer. The error conditions are encoded as - bits in an octet string, with the following - definitions: - - Condition Bit # - - lowPaper 0 - - noPaper 1 - lowToner 2 - noToner 3 - doorOpen 4 - jammed 5 - offline 6 - serviceRequested 7 - inputTrayMissing 8 - outputTrayMissing 9 - markerSupplyMissing 10 - outputNearFull 11 - outputFull 12 - inputTrayEmpty 13 - overduePreventMaint 14 - - Bits are numbered starting with the most significant - bit of the first byte being bit 0, the least - significant bit of the first byte being bit 7, the - most significant bit of the second byte being bit 8, - and so on. A one bit encodes that the condition was - detected, while a zero bit encodes that the condition - was not detected. - - This object is useful for alerting an operator to - specific warning or error conditions that may occur, - especially those requiring human intervention." - ::= { hrPrinterEntry 2 } - -hrDiskStorageTable OBJECT-TYPE - SYNTAX SEQUENCE OF HrDiskStorageEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The (conceptual) table of long-term storage devices - contained by the host. In particular, disk devices - accessed remotely over a network are not included - here. - - Note that this table is potentially sparse: a - (conceptual) entry exists only if the correspondent - value of the hrDeviceType object is - `hrDeviceDiskStorage'." - ::= { hrDevice 6 } - -hrDiskStorageEntry OBJECT-TYPE - SYNTAX HrDiskStorageEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A (conceptual) entry for one long-term storage device - contained by the host. The hrDeviceIndex in the index - represents the entry in the hrDeviceTable that - corresponds to the hrDiskStorageEntry. As an example, - an instance of the hrDiskStorageCapacity object might - be named hrDiskStorageCapacity.3" - INDEX { hrDeviceIndex } - ::= { hrDiskStorageTable 1 } - -HrDiskStorageEntry ::= SEQUENCE { - hrDiskStorageAccess INTEGER, - hrDiskStorageMedia INTEGER, - hrDiskStorageRemoveble TruthValue, - hrDiskStorageCapacity KBytes - } - -hrDiskStorageAccess OBJECT-TYPE - SYNTAX INTEGER { - readWrite(1), - readOnly(2) - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "An indication if this long-term storage device is - readable and writable or only readable. This should - reflect the media type, any write-protect mechanism, - and any device configuration that affects the entire - device." - ::= { hrDiskStorageEntry 1 } - -hrDiskStorageMedia OBJECT-TYPE - SYNTAX INTEGER { - other(1), - unknown(2), - hardDisk(3), - floppyDisk(4), - opticalDiskROM(5), - opticalDiskWORM(6), -- Write Once Read Many - opticalDiskRW(7), - ramDisk(8) - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "An indication of the type of media used in this long- - term storage device." - ::= { hrDiskStorageEntry 2 } - -hrDiskStorageRemoveble OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Denotes whether or not the disk media may be removed - from the drive." - ::= { hrDiskStorageEntry 3 } - -hrDiskStorageCapacity OBJECT-TYPE - SYNTAX KBytes - UNITS "KBytes" - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The total size for this long-term storage device. If - the media is removable and is currently removed, this - value should be zero." - ::= { hrDiskStorageEntry 4 } - -hrPartitionTable OBJECT-TYPE - SYNTAX SEQUENCE OF HrPartitionEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The (conceptual) table of partitions for long-term - storage devices contained by the host. In particular, - partitions accessed remotely over a network are not - included here." - ::= { hrDevice 7 } - -hrPartitionEntry OBJECT-TYPE - SYNTAX HrPartitionEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A (conceptual) entry for one partition. The - hrDeviceIndex in the index represents the entry in the - hrDeviceTable that corresponds to the - hrPartitionEntry. - - As an example of how objects in this table are named, - an instance of the hrPartitionSize object might be - named hrPartitionSize.3.1" - INDEX { hrDeviceIndex, hrPartitionIndex } - ::= { hrPartitionTable 1 } - -HrPartitionEntry ::= SEQUENCE { - hrPartitionIndex Integer32, - hrPartitionLabel InternationalDisplayString, - hrPartitionID OCTET STRING, - hrPartitionSize KBytes, - hrPartitionFSIndex Integer32 - } - -hrPartitionIndex OBJECT-TYPE - SYNTAX Integer32 (1..2147483647) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A unique value for each partition on this long-term - storage device. The value for each long-term storage - device must remain constant at least from one re- - initialization of the agent to the next re- - initialization." - ::= { hrPartitionEntry 1 } - -hrPartitionLabel OBJECT-TYPE - SYNTAX InternationalDisplayString (SIZE (0..128)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A textual description of this partition." - ::= { hrPartitionEntry 2 } - -hrPartitionID OBJECT-TYPE - SYNTAX OCTET STRING - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A descriptor which uniquely represents this partition - to the responsible operating system. On some systems, - this might take on a binary representation." - ::= { hrPartitionEntry 3 } - -hrPartitionSize OBJECT-TYPE - SYNTAX KBytes - UNITS "KBytes" - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The size of this partition." - ::= { hrPartitionEntry 4 } - -hrPartitionFSIndex OBJECT-TYPE - SYNTAX Integer32 (0..2147483647) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The index of the file system mounted on this - partition. If no file system is mounted on this - partition, then this value shall be zero. Note that - multiple partitions may point to one file system, - denoting that that file system resides on those - partitions. Multiple file systems may not reside on - one partition." - ::= { hrPartitionEntry 5 } - --- The File System Table - --- Registration point for popular File System types, --- for use with hrFSType. These are defined in the --- HOST-RESOURCES-TYPES module. -hrFSTypes OBJECT IDENTIFIER ::= { hrDevice 9 } - -hrFSTable OBJECT-TYPE - SYNTAX SEQUENCE OF HrFSEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The (conceptual) table of file systems local to this - host or remotely mounted from a file server. File - systems that are in only one user's environment on a - multi-user system will not be included in this table." - ::= { hrDevice 8 } - -hrFSEntry OBJECT-TYPE - SYNTAX HrFSEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A (conceptual) entry for one file system local to - this host or remotely mounted from a file server. - File systems that are in only one user's environment - on a multi-user system will not be included in this - table. - - As an example of how objects in this table are named, - an instance of the hrFSMountPoint object might be - named hrFSMountPoint.3" - INDEX { hrFSIndex } - ::= { hrFSTable 1 } - -HrFSEntry ::= SEQUENCE { - hrFSIndex Integer32, - hrFSMountPoint InternationalDisplayString, - hrFSRemoteMountPoint InternationalDisplayString, - hrFSType AutonomousType, - hrFSAccess INTEGER, - hrFSBootable TruthValue, - hrFSStorageIndex Integer32, - hrFSLastFullBackupDate DateAndTime, - hrFSLastPartialBackupDate DateAndTime - } - -hrFSIndex OBJECT-TYPE - SYNTAX Integer32 (1..2147483647) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A unique value for each file system local to this - host. The value for each file system must remain - constant at least from one re-initialization of the - agent to the next re-initialization." - ::= { hrFSEntry 1 } - -hrFSMountPoint OBJECT-TYPE - SYNTAX InternationalDisplayString (SIZE(0..128)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The path name of the root of this file system." - ::= { hrFSEntry 2 } - -hrFSRemoteMountPoint OBJECT-TYPE - SYNTAX InternationalDisplayString (SIZE(0..128)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A description of the name and/or address of the - server that this file system is mounted from. This - may also include parameters such as the mount point on - the remote file system. If this is not a remote file - system, this string should have a length of zero." - ::= { hrFSEntry 3 } - -hrFSType OBJECT-TYPE - SYNTAX AutonomousType - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The value of this object identifies the type of this - file system." - ::= { hrFSEntry 4 } - -hrFSAccess OBJECT-TYPE - SYNTAX INTEGER { - readWrite(1), - readOnly(2) - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "An indication if this file system is logically - configured by the operating system to be readable and - writable or only readable. This does not represent - any local access-control policy, except one that is - applied to the file system as a whole." - ::= { hrFSEntry 5 } - -hrFSBootable OBJECT-TYPE - SYNTAX TruthValue - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A flag indicating whether this file system is - bootable." - ::= { hrFSEntry 6 } - -hrFSStorageIndex OBJECT-TYPE - SYNTAX Integer32 (0..2147483647) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The index of the hrStorageEntry that represents - information about this file system. If there is no - such information available, then this value shall be - zero. The relevant storage entry will be useful in - tracking the percent usage of this file system and - diagnosing errors that may occur when it runs out of - space." - ::= { hrFSEntry 7 } - -hrFSLastFullBackupDate OBJECT-TYPE - SYNTAX DateAndTime - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "The last date at which this complete file system was - - copied to another storage device for backup. This - information is useful for ensuring that backups are - being performed regularly. - - If this information is not known, then this variable - shall have the value corresponding to January 1, year - 0000, 00:00:00.0, which is encoded as - (hex)'00 00 01 01 00 00 00 00'." - ::= { hrFSEntry 8 } - -hrFSLastPartialBackupDate OBJECT-TYPE - SYNTAX DateAndTime - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "The last date at which a portion of this file system - was copied to another storage device for backup. This - information is useful for ensuring that backups are - being performed regularly. - - If this information is not known, then this variable - shall have the value corresponding to January 1, year - 0000, 00:00:00.0, which is encoded as - (hex)'00 00 01 01 00 00 00 00'." - ::= { hrFSEntry 9 } - --- The Host Resources Running Software Group --- --- The hrSWRunTable contains an entry for each distinct piece of --- software that is running or loaded into physical or virtual --- memory in preparation for running. This includes the host's --- operating system, device drivers, and applications. - -hrSWOSIndex OBJECT-TYPE - SYNTAX Integer32 (1..2147483647) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The value of the hrSWRunIndex for the hrSWRunEntry - that represents the primary operating system running - on this host. This object is useful for quickly and - uniquely identifying that primary operating system." - ::= { hrSWRun 1 } - -hrSWRunTable OBJECT-TYPE - SYNTAX SEQUENCE OF HrSWRunEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The (conceptual) table of software running on the - host." - ::= { hrSWRun 2 } - -hrSWRunEntry OBJECT-TYPE - SYNTAX HrSWRunEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A (conceptual) entry for one piece of software - running on the host Note that because the installed - software table only contains information for software - stored locally on this host, not every piece of - running software will be found in the installed - software table. This is true of software that was - loaded and run from a non-local source, such as a - network-mounted file system. - - As an example of how objects in this table are named, - an instance of the hrSWRunName object might be named - hrSWRunName.1287" - INDEX { hrSWRunIndex } - ::= { hrSWRunTable 1 } - -HrSWRunEntry ::= SEQUENCE { - hrSWRunIndex Integer32, - hrSWRunName InternationalDisplayString, - hrSWRunID ProductID, - hrSWRunPath InternationalDisplayString, - hrSWRunParameters InternationalDisplayString, - hrSWRunType INTEGER, - hrSWRunStatus INTEGER - } - -hrSWRunIndex OBJECT-TYPE - SYNTAX Integer32 (1..2147483647) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A unique value for each piece of software running on - the host. Wherever possible, this should be the - system's native, unique identification number." - ::= { hrSWRunEntry 1 } - -hrSWRunName OBJECT-TYPE - SYNTAX InternationalDisplayString (SIZE (0..64)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A textual description of this running piece of - software, including the manufacturer, revision, and - the name by which it is commonly known. If this - software was installed locally, this should be the - same string as used in the corresponding - hrSWInstalledName." - ::= { hrSWRunEntry 2 } - -hrSWRunID OBJECT-TYPE - SYNTAX ProductID - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The product ID of this running piece of software." - ::= { hrSWRunEntry 3 } - -hrSWRunPath OBJECT-TYPE - SYNTAX InternationalDisplayString (SIZE(0..128)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A description of the location on long-term storage - (e.g. a disk drive) from which this software was - loaded." - ::= { hrSWRunEntry 4 } - -hrSWRunParameters OBJECT-TYPE - SYNTAX InternationalDisplayString (SIZE(0..128)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A description of the parameters supplied to this - software when it was initially loaded." - ::= { hrSWRunEntry 5 } - -hrSWRunType OBJECT-TYPE - SYNTAX INTEGER { - unknown(1), - operatingSystem(2), - deviceDriver(3), - application(4) - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The type of this software." - ::= { hrSWRunEntry 6 } - -hrSWRunStatus OBJECT-TYPE - SYNTAX INTEGER { - running(1), - runnable(2), -- waiting for resource - -- (i.e., CPU, memory, IO) - notRunnable(3), -- loaded but waiting for event - invalid(4) -- not loaded - } - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "The status of this running piece of software. - Setting this value to invalid(4) shall cause this - software to stop running and to be unloaded. Sets to - other values are not valid." - ::= { hrSWRunEntry 7 } - --- The Host Resources Running Software Performance Group --- --- The hrSWRunPerfTable contains an entry corresponding to --- each entry in the hrSWRunTable. - -hrSWRunPerfTable OBJECT-TYPE - SYNTAX SEQUENCE OF HrSWRunPerfEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The (conceptual) table of running software - performance metrics." - ::= { hrSWRunPerf 1 } - -hrSWRunPerfEntry OBJECT-TYPE - SYNTAX HrSWRunPerfEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A (conceptual) entry containing software performance - metrics. As an example, an instance of the - hrSWRunPerfCPU object might be named - hrSWRunPerfCPU.1287" - AUGMENTS { hrSWRunEntry } -- This table augments information in - -- the hrSWRunTable. - ::= { hrSWRunPerfTable 1 } - -HrSWRunPerfEntry ::= SEQUENCE { - hrSWRunPerfCPU Integer32, - hrSWRunPerfMem KBytes -} - -hrSWRunPerfCPU OBJECT-TYPE - SYNTAX Integer32 (0..2147483647) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of centi-seconds of the total system's CPU - resources consumed by this process. Note that on a - multi-processor system, this value may increment by - more than one centi-second in one centi-second of real - (wall clock) time." - ::= { hrSWRunPerfEntry 1 } - -hrSWRunPerfMem OBJECT-TYPE - SYNTAX KBytes - UNITS "KBytes" - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The total amount of real system memory allocated to - this process." - ::= { hrSWRunPerfEntry 2 } - --- The Host Resources Installed Software Group --- --- The hrSWInstalledTable contains an entry for each piece --- of software installed in long-term storage (e.g. a disk --- drive) locally on this host. Note that this does not --- include software loadable remotely from a network --- server. --- --- Different implementations may track software in varying --- ways. For example, while some implementations may track --- executable files as distinct pieces of software, other --- implementations may use other strategies such as keeping --- track of software "packages" (e.g., related groups of files) --- or keeping track of system or application "patches". --- --- This table is useful for identifying and inventorying --- software on a host and for diagnosing incompatibility --- and version mismatch problems between various pieces --- of hardware and software. - -hrSWInstalledLastChange OBJECT-TYPE - SYNTAX TimeTicks - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The value of sysUpTime when an entry in the - hrSWInstalledTable was last added, renamed, or - deleted. Because this table is likely to contain many - entries, polling of this object allows a management - station to determine when re-downloading of the table - might be useful." - ::= { hrSWInstalled 1 } - -hrSWInstalledLastUpdateTime OBJECT-TYPE - SYNTAX TimeTicks - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The value of sysUpTime when the hrSWInstalledTable - was last completely updated. Because caching of this - data will be a popular implementation strategy, - retrieval of this object allows a management station - to obtain a guarantee that no data in this table is - older than the indicated time." - ::= { hrSWInstalled 2 } - -hrSWInstalledTable OBJECT-TYPE - SYNTAX SEQUENCE OF HrSWInstalledEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The (conceptual) table of software installed on this - host." - ::= { hrSWInstalled 3 } - -hrSWInstalledEntry OBJECT-TYPE - SYNTAX HrSWInstalledEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A (conceptual) entry for a piece of software - installed on this host. - - As an example of how objects in this table are named, - an instance of the hrSWInstalledName object might be - named hrSWInstalledName.96" - INDEX { hrSWInstalledIndex } - ::= { hrSWInstalledTable 1 } - -HrSWInstalledEntry ::= SEQUENCE { - hrSWInstalledIndex Integer32, - hrSWInstalledName InternationalDisplayString, - hrSWInstalledID ProductID, - hrSWInstalledType INTEGER, - hrSWInstalledDate DateAndTime -} - -hrSWInstalledIndex OBJECT-TYPE - SYNTAX Integer32 (1..2147483647) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A unique value for each piece of software installed - on the host. This value shall be in the range from 1 - to the number of pieces of software installed on the - host." - ::= { hrSWInstalledEntry 1 } - -hrSWInstalledName OBJECT-TYPE - SYNTAX InternationalDisplayString (SIZE (0..64)) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A textual description of this installed piece of - software, including the manufacturer, revision, the - name by which it is commonly known, and optionally, - its serial number." - ::= { hrSWInstalledEntry 2 } - -hrSWInstalledID OBJECT-TYPE - SYNTAX ProductID - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The product ID of this installed piece of software." - ::= { hrSWInstalledEntry 3 } - -hrSWInstalledType OBJECT-TYPE - SYNTAX INTEGER { - unknown(1), - operatingSystem(2), - deviceDriver(3), - application(4) - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The type of this software." - ::= { hrSWInstalledEntry 4 } - -hrSWInstalledDate OBJECT-TYPE - SYNTAX DateAndTime - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The last-modification date of this application as it - would appear in a directory listing. - - If this information is not known, then this variable - shall have the value corresponding to January 1, year - 0000, 00:00:00.0, which is encoded as - (hex)'00 00 01 01 00 00 00 00'." - ::= { hrSWInstalledEntry 5 } - --- Conformance information - -hrMIBCompliances OBJECT IDENTIFIER ::= { hrMIBAdminInfo 2 } -hrMIBGroups OBJECT IDENTIFIER ::= { hrMIBAdminInfo 3 } - --- Compliance Statements -hrMIBCompliance MODULE-COMPLIANCE - STATUS current - DESCRIPTION - "The requirements for conformance to the Host Resources MIB." - MODULE -- this module - MANDATORY-GROUPS { hrSystemGroup, hrStorageGroup, - hrDeviceGroup } - - OBJECT hrSystemDate - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required." - - OBJECT hrSystemInitialLoadDevice - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required." - - OBJECT hrSystemInitialLoadParameters - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required." - - OBJECT hrStorageSize - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required." - - OBJECT hrFSLastFullBackupDate - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required." - - OBJECT hrFSLastPartialBackupDate - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required." - - GROUP hrSWRunGroup - DESCRIPTION - "The Running Software Group. Implementation - of this group is mandatory only when the - hrSWRunPerfGroup is implemented." - - OBJECT hrSWRunStatus - MIN-ACCESS read-only - DESCRIPTION - "Write access is not required." - - GROUP hrSWRunPerfGroup - DESCRIPTION - "The Running Software Performance Group. - Implementation of this group is at the discretion - of the implementor." - - GROUP hrSWInstalledGroup - DESCRIPTION - "The Installed Software Group. - Implementation of this group is at the discretion - of the implementor." - ::= { hrMIBCompliances 1 } - - hrSystemGroup OBJECT-GROUP - OBJECTS { - hrSystemUptime, hrSystemDate, - hrSystemInitialLoadDevice, - hrSystemInitialLoadParameters, - hrSystemNumUsers, hrSystemProcesses, - hrSystemMaxProcesses - } - STATUS current - DESCRIPTION - "The Host Resources System Group." - ::= { hrMIBGroups 1 } - - hrStorageGroup OBJECT-GROUP - OBJECTS { - hrMemorySize, hrStorageIndex, hrStorageType, - hrStorageDescr, hrStorageAllocationUnits, - hrStorageSize, hrStorageUsed, - hrStorageAllocationFailures - } - STATUS current - DESCRIPTION - "The Host Resources Storage Group." - ::= { hrMIBGroups 2 } - - hrDeviceGroup OBJECT-GROUP - OBJECTS { - hrDeviceIndex, hrDeviceType, hrDeviceDescr, - hrDeviceID, hrDeviceStatus, hrDeviceErrors, - hrProcessorFrwID, hrProcessorLoad, - hrNetworkIfIndex, hrPrinterStatus, - hrPrinterDetectedErrorState, - hrDiskStorageAccess, hrDiskStorageMedia, - hrDiskStorageRemoveble, hrDiskStorageCapacity, - hrPartitionIndex, hrPartitionLabel, - hrPartitionID, hrPartitionSize, - hrPartitionFSIndex, hrFSIndex, hrFSMountPoint, - hrFSRemoteMountPoint, hrFSType, hrFSAccess, - hrFSBootable, hrFSStorageIndex, - hrFSLastFullBackupDate, - hrFSLastPartialBackupDate - } - STATUS current - DESCRIPTION - "The Host Resources Device Group." - ::= { hrMIBGroups 3 } - - hrSWRunGroup OBJECT-GROUP - OBJECTS { - hrSWOSIndex, hrSWRunIndex, hrSWRunName, - hrSWRunID, hrSWRunPath, hrSWRunParameters, - hrSWRunType, hrSWRunStatus - } - STATUS current - DESCRIPTION - "The Host Resources Running Software Group." - ::= { hrMIBGroups 4 } - - hrSWRunPerfGroup OBJECT-GROUP - OBJECTS { hrSWRunPerfCPU, hrSWRunPerfMem } - STATUS current - DESCRIPTION - "The Host Resources Running Software - Performance Group." - ::= { hrMIBGroups 5 } - - hrSWInstalledGroup OBJECT-GROUP - OBJECTS { - hrSWInstalledLastChange, - hrSWInstalledLastUpdateTime, - hrSWInstalledIndex, hrSWInstalledName, - hrSWInstalledID, hrSWInstalledType, - hrSWInstalledDate - } - STATUS current - DESCRIPTION - "The Host Resources Installed Software Group." - ::= { hrMIBGroups 6 } - -END |