summaryrefslogtreecommitdiff
path: root/data/mibs/HOST-RESOURCES-MIB.txt
diff options
context:
space:
mode:
Diffstat (limited to 'data/mibs/HOST-RESOURCES-MIB.txt')
-rw-r--r--data/mibs/HOST-RESOURCES-MIB.txt1540
1 files changed, 1540 insertions, 0 deletions
diff --git a/data/mibs/HOST-RESOURCES-MIB.txt b/data/mibs/HOST-RESOURCES-MIB.txt
new file mode 100644
index 000000000..373b9b328
--- /dev/null
+++ b/data/mibs/HOST-RESOURCES-MIB.txt
@@ -0,0 +1,1540 @@
+HOST-RESOURCES-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+MODULE-IDENTITY, OBJECT-TYPE, mib-2,
+Integer32, Counter32, Gauge32, TimeTicks FROM SNMPv2-SMI
+
+TEXTUAL-CONVENTION, DisplayString,
+TruthValue, DateAndTime, AutonomousType FROM SNMPv2-TC
+
+MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
+
+InterfaceIndexOrZero FROM IF-MIB;
+
+hostResourcesMibModule MODULE-IDENTITY
+ LAST-UPDATED "200003060000Z" -- 6 March 2000
+ ORGANIZATION "IETF Host Resources MIB Working Group"
+ CONTACT-INFO
+ "Steve Waldbusser
+ Postal: Lucent Technologies, Inc.
+ 1213 Innsbruck Dr.
+ Sunnyvale, CA 94089
+ USA
+ Phone: 650-318-1251
+ Fax: 650-318-1633
+ Email: waldbusser@lucent.com
+
+ In addition, the Host Resources MIB mailing list is
+ dedicated to discussion of this MIB. To join the
+ mailing list, send a request message to
+ hostmib-request@andrew.cmu.edu. The mailing list
+ address is hostmib@andrew.cmu.edu."
+ DESCRIPTION
+ "This MIB is for use in managing host systems. The term
+ `host' is construed to mean any computer that communicates
+ with other similar computers attached to the internet and
+ that is directly used by one or more human beings. Although
+ this MIB does not necessarily apply to devices whose primary
+ function is communications services (e.g., terminal servers,
+ routers, bridges, monitoring equipment), such relevance is
+ not explicitly precluded. This MIB instruments attributes
+ common to all internet hosts including, for example, both
+ personal computers and systems that run variants of Unix."
+
+ REVISION "200003060000Z" -- 6 March 2000
+ DESCRIPTION
+ "Clarifications and bug fixes based on implementation
+ experience. This revision was also reformatted in the SMIv2
+ format. The revisions made were:
+
+ New RFC document standards:
+ Added Copyright notice, updated introduction to SNMP
+ Framework, updated references section, added reference to
+ RFC 2119, and added a meaningful Security Considerations
+ section.
+
+ New IANA considerations section for registration of new types
+
+ Conversion to new SMIv2 syntax for the following types and
+ macros:
+ Counter32, Integer32, Gauge32, MODULE-IDENTITY,
+ OBJECT-TYPE, TEXTUAL-CONVENTION, OBJECT-IDENTITY,
+ MODULE-COMPLIANCE, OBJECT-GROUP
+
+ Used new Textual Conventions:
+ TruthValue, DateAndTime, AutonomousType,
+ InterfaceIndexOrZero
+
+ Fixed typo in hrPrinterStatus.
+
+ Added missing error bits to hrPrinterDetectedErrorState and
+ clarified confusion resulting from suggested mappings to
+ hrPrinterStatus.
+
+ Clarified that size of objects of type
+ InternationalDisplayString is number of octets, not number
+ of encoded symbols.
+
+ Clarified the use of the following objects based on
+ implementation experience:
+ hrSystemInitialLoadDevice, hrSystemInitialLoadParameters,
+ hrMemorySize, hrStorageSize, hrStorageAllocationFailures,
+ hrDeviceErrors, hrProcessorLoad, hrNetworkIfIndex,
+ hrDiskStorageCapacity, hrSWRunStatus, hrSWRunPerfCPU,
+ and hrSWInstalledDate.
+
+ Clarified implementation technique for hrSWInstalledTable.
+
+ Used new AUGMENTS clause for hrSWRunPerfTable.
+
+ Added Internationalization Considerations section.
+
+This revision published as RFC2790."
+
+ REVISION "9910202200Z" -- 20 October, 1999
+ DESCRIPTION
+ "The original version of this MIB, published as
+ RFC1514."
+ ::= { hrMIBAdminInfo 1 }
+
+host OBJECT IDENTIFIER ::= { mib-2 25 }
+
+hrSystem OBJECT IDENTIFIER ::= { host 1 }
+hrStorage OBJECT IDENTIFIER ::= { host 2 }
+hrDevice OBJECT IDENTIFIER ::= { host 3 }
+hrSWRun OBJECT IDENTIFIER ::= { host 4 }
+hrSWRunPerf OBJECT IDENTIFIER ::= { host 5 }
+hrSWInstalled OBJECT IDENTIFIER ::= { host 6 }
+hrMIBAdminInfo OBJECT IDENTIFIER ::= { host 7 }
+
+-- textual conventions
+
+KBytes ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "Storage size, expressed in units of 1024 bytes."
+ SYNTAX Integer32 (0..2147483647)
+
+ProductID ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "This textual convention is intended to identify the
+
+ manufacturer, model, and version of a specific
+ hardware or software product. It is suggested that
+ these OBJECT IDENTIFIERs are allocated such that all
+ products from a particular manufacturer are registered
+ under a subtree distinct to that manufacturer. In
+ addition, all versions of a product should be
+ registered under a subtree distinct to that product.
+ With this strategy, a management station may uniquely
+ determine the manufacturer and/or model of a product
+ whose productID is unknown to the management station.
+ Objects of this type may be useful for inventory
+ purposes or for automatically detecting
+ incompatibilities or version mismatches between
+ various hardware and software components on a system.
+
+ For example, the product ID for the ACME 4860 66MHz
+ clock doubled processor might be:
+ enterprises.acme.acmeProcessors.a4860DX2.MHz66
+
+ A software product might be registered as:
+ enterprises.acme.acmeOperatingSystems.acmeDOS.six(6).one(1)
+ "
+ SYNTAX OBJECT IDENTIFIER
+
+-- unknownProduct will be used for any unknown ProductID
+-- unknownProduct OBJECT IDENTIFIER ::= { 0 0 }
+
+InternationalDisplayString ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "This data type is used to model textual information
+ in some character set. A network management station
+ should use a local algorithm to determine which
+ character set is in use and how it should be
+ displayed. Note that this character set may be
+ encoded with more than one octet per symbol, but will
+ most often be NVT ASCII. When a size clause is
+ specified for an object of this type, the size refers
+ to the length in octets, not the number of symbols."
+ SYNTAX OCTET STRING
+
+-- The Host Resources System Group
+
+hrSystemUptime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The amount of time since this host was last
+ initialized. Note that this is different from
+ sysUpTime in the SNMPv2-MIB [RFC1907] because
+ sysUpTime is the uptime of the network management
+ portion of the system."
+ ::= { hrSystem 1 }
+
+hrSystemDate OBJECT-TYPE
+ SYNTAX DateAndTime
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The host's notion of the local date and time of day."
+ ::= { hrSystem 2 }
+
+hrSystemInitialLoadDevice OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The index of the hrDeviceEntry for the device from
+ which this host is configured to load its initial
+ operating system configuration (i.e., which operating
+ system code and/or boot parameters).
+
+ Note that writing to this object just changes the
+ configuration that will be used the next time the
+ operating system is loaded and does not actually cause
+ the reload to occur."
+ ::= { hrSystem 3 }
+
+hrSystemInitialLoadParameters OBJECT-TYPE
+ SYNTAX InternationalDisplayString (SIZE (0..128))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object contains the parameters (e.g. a pathname
+ and parameter) supplied to the load device when
+ requesting the initial operating system configuration
+ from that device.
+
+ Note that writing to this object just changes the
+ configuration that will be used the next time the
+ operating system is loaded and does not actually cause
+ the reload to occur."
+ ::= { hrSystem 4 }
+
+hrSystemNumUsers OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of user sessions for which this host is
+ storing state information. A session is a collection
+ of processes requiring a single act of user
+ authentication and possibly subject to collective job
+ control."
+ ::= { hrSystem 5 }
+
+hrSystemProcesses OBJECT-TYPE
+ SYNTAX Gauge32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of process contexts currently loaded or
+ running on this system."
+ ::= { hrSystem 6 }
+
+hrSystemMaxProcesses OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum number of process contexts this system
+ can support. If there is no fixed maximum, the value
+ should be zero. On systems that have a fixed maximum,
+ this object can help diagnose failures that occur when
+ this maximum is reached."
+ ::= { hrSystem 7 }
+
+-- The Host Resources Storage Group
+
+-- Registration point for storage types, for use with hrStorageType.
+-- These are defined in the HOST-RESOURCES-TYPES module.
+hrStorageTypes OBJECT IDENTIFIER ::= { hrStorage 1 }
+
+hrMemorySize OBJECT-TYPE
+ SYNTAX KBytes
+ UNITS "KBytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The amount of physical read-write main memory,
+ typically RAM, contained by the host."
+ ::= { hrStorage 2 }
+
+hrStorageTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HrStorageEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The (conceptual) table of logical storage areas on
+ the host.
+
+ An entry shall be placed in the storage table for each
+ logical area of storage that is allocated and has
+ fixed resource limits. The amount of storage
+ represented in an entity is the amount actually usable
+ by the requesting entity, and excludes loss due to
+ formatting or file system reference information.
+
+ These entries are associated with logical storage
+ areas, as might be seen by an application, rather than
+ physical storage entities which are typically seen by
+ an operating system. Storage such as tapes and
+ floppies without file systems on them are typically
+ not allocated in chunks by the operating system to
+ requesting applications, and therefore shouldn't
+ appear in this table. Examples of valid storage for
+ this table include disk partitions, file systems, ram
+ (for some architectures this is further segmented into
+ regular memory, extended memory, and so on), backing
+ store for virtual memory (`swap space').
+
+ This table is intended to be a useful diagnostic for
+ `out of memory' and `out of buffers' types of
+ failures. In addition, it can be a useful performance
+ monitoring tool for tracking memory, disk, or buffer
+ usage."
+ ::= { hrStorage 3 }
+
+hrStorageEntry OBJECT-TYPE
+ SYNTAX HrStorageEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A (conceptual) entry for one logical storage area on
+ the host. As an example, an instance of the
+ hrStorageType object might be named hrStorageType.3"
+ INDEX { hrStorageIndex }
+ ::= { hrStorageTable 1 }
+
+HrStorageEntry ::= SEQUENCE {
+ hrStorageIndex Integer32,
+ hrStorageType AutonomousType,
+ hrStorageDescr DisplayString,
+ hrStorageAllocationUnits Integer32,
+ hrStorageSize Integer32,
+ hrStorageUsed Integer32,
+ hrStorageAllocationFailures Counter32
+ }
+
+hrStorageIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A unique value for each logical storage area
+ contained by the host."
+ ::= { hrStorageEntry 1 }
+
+hrStorageType OBJECT-TYPE
+ SYNTAX AutonomousType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of storage represented by this entry."
+ ::= { hrStorageEntry 2 }
+
+hrStorageDescr OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A description of the type and instance of the storage
+ described by this entry."
+ ::= { hrStorageEntry 3 }
+
+hrStorageAllocationUnits OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ UNITS "Bytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The size, in bytes, of the data objects allocated
+ from this pool. If this entry is monitoring sectors,
+ blocks, buffers, or packets, for example, this number
+ will commonly be greater than one. Otherwise this
+ number will typically be one."
+ ::= { hrStorageEntry 4 }
+
+hrStorageSize OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The size of the storage represented by this entry, in
+ units of hrStorageAllocationUnits. This object is
+ writable to allow remote configuration of the size of
+ the storage area in those cases where such an
+ operation makes sense and is possible on the
+ underlying system. For example, the amount of main
+ memory allocated to a buffer pool might be modified or
+ the amount of disk space allocated to virtual memory
+ might be modified."
+ ::= { hrStorageEntry 5 }
+
+hrStorageUsed OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The amount of the storage represented by this entry
+ that is allocated, in units of
+ hrStorageAllocationUnits."
+ ::= { hrStorageEntry 6 }
+
+hrStorageAllocationFailures OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of requests for storage represented by
+ this entry that could not be honored due to not enough
+ storage. It should be noted that as this object has a
+ SYNTAX of Counter32, that it does not have a defined
+ initial value. However, it is recommended that this
+ object be initialized to zero, even though management
+ stations must not depend on such an initialization."
+ ::= { hrStorageEntry 7 }
+
+-- The Host Resources Device Group
+--
+-- The device group is useful for identifying and diagnosing the
+-- devices on a system. The hrDeviceTable contains common
+-- information for any type of device. In addition, some devices
+-- have device-specific tables for more detailed information. More
+-- such tables may be defined in the future for other device types.
+
+-- Registration point for device types, for use with hrDeviceType.
+
+-- These are defined in the HOST-RESOURCES-TYPES module.
+hrDeviceTypes OBJECT IDENTIFIER ::= { hrDevice 1 }
+
+hrDeviceTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HrDeviceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The (conceptual) table of devices contained by the
+ host."
+ ::= { hrDevice 2 }
+
+hrDeviceEntry OBJECT-TYPE
+ SYNTAX HrDeviceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A (conceptual) entry for one device contained by the
+ host. As an example, an instance of the hrDeviceType
+ object might be named hrDeviceType.3"
+ INDEX { hrDeviceIndex }
+ ::= { hrDeviceTable 1 }
+
+HrDeviceEntry ::= SEQUENCE {
+ hrDeviceIndex Integer32,
+ hrDeviceType AutonomousType,
+ hrDeviceDescr DisplayString,
+ hrDeviceID ProductID,
+ hrDeviceStatus INTEGER,
+ hrDeviceErrors Counter32
+ }
+
+hrDeviceIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A unique value for each device contained by the host.
+ The value for each device must remain constant at
+ least from one re-initialization of the agent to the
+ next re-initialization."
+ ::= { hrDeviceEntry 1 }
+
+hrDeviceType OBJECT-TYPE
+ SYNTAX AutonomousType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An indication of the type of device.
+
+ If this value is
+ `hrDeviceProcessor { hrDeviceTypes 3 }' then an entry
+ exists in the hrProcessorTable which corresponds to
+ this device.
+
+ If this value is
+ `hrDeviceNetwork { hrDeviceTypes 4 }', then an entry
+ exists in the hrNetworkTable which corresponds to this
+ device.
+
+ If this value is
+ `hrDevicePrinter { hrDeviceTypes 5 }', then an entry
+ exists in the hrPrinterTable which corresponds to this
+ device.
+
+ If this value is
+ `hrDeviceDiskStorage { hrDeviceTypes 6 }', then an
+ entry exists in the hrDiskStorageTable which
+ corresponds to this device."
+ ::= { hrDeviceEntry 2 }
+
+hrDeviceDescr OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..64))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A textual description of this device, including the
+ device's manufacturer and revision, and optionally,
+ its serial number."
+ ::= { hrDeviceEntry 3 }
+
+hrDeviceID OBJECT-TYPE
+ SYNTAX ProductID
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The product ID for this device."
+ ::= { hrDeviceEntry 4 }
+
+hrDeviceStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(1),
+ running(2),
+ warning(3),
+ testing(4),
+ down(5)
+
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current operational state of the device described
+ by this row of the table. A value unknown(1)
+ indicates that the current state of the device is
+ unknown. running(2) indicates that the device is up
+ and running and that no unusual error conditions are
+ known. The warning(3) state indicates that agent has
+ been informed of an unusual error condition by the
+ operational software (e.g., a disk device driver) but
+ that the device is still 'operational'. An example
+ would be a high number of soft errors on a disk. A
+ value of testing(4), indicates that the device is not
+ available for use because it is in the testing state.
+ The state of down(5) is used only when the agent has
+ been informed that the device is not available for any
+ use."
+ ::= { hrDeviceEntry 5 }
+
+hrDeviceErrors OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of errors detected on this device. It
+ should be noted that as this object has a SYNTAX of
+ Counter32, that it does not have a defined initial
+ value. However, it is recommended that this object be
+ initialized to zero, even though management stations
+ must not depend on such an initialization."
+ ::= { hrDeviceEntry 6 }
+
+hrProcessorTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HrProcessorEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The (conceptual) table of processors contained by the
+ host.
+
+ Note that this table is potentially sparse: a
+ (conceptual) entry exists only if the correspondent
+ value of the hrDeviceType object is
+ `hrDeviceProcessor'."
+ ::= { hrDevice 3 }
+
+hrProcessorEntry OBJECT-TYPE
+ SYNTAX HrProcessorEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A (conceptual) entry for one processor contained by
+ the host. The hrDeviceIndex in the index represents
+ the entry in the hrDeviceTable that corresponds to the
+ hrProcessorEntry.
+
+ As an example of how objects in this table are named,
+ an instance of the hrProcessorFrwID object might be
+ named hrProcessorFrwID.3"
+ INDEX { hrDeviceIndex }
+ ::= { hrProcessorTable 1 }
+
+HrProcessorEntry ::= SEQUENCE {
+ hrProcessorFrwID ProductID,
+ hrProcessorLoad Integer32
+ }
+
+hrProcessorFrwID OBJECT-TYPE
+ SYNTAX ProductID
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The product ID of the firmware associated with the
+ processor."
+ ::= { hrProcessorEntry 1 }
+
+hrProcessorLoad OBJECT-TYPE
+ SYNTAX Integer32 (0..100)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The average, over the last minute, of the percentage
+ of time that this processor was not idle.
+ Implementations may approximate this one minute
+ smoothing period if necessary."
+ ::= { hrProcessorEntry 2 }
+
+hrNetworkTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HrNetworkEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The (conceptual) table of network devices contained
+ by the host.
+
+ Note that this table is potentially sparse: a
+ (conceptual) entry exists only if the correspondent
+ value of the hrDeviceType object is
+ `hrDeviceNetwork'."
+ ::= { hrDevice 4 }
+
+hrNetworkEntry OBJECT-TYPE
+ SYNTAX HrNetworkEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A (conceptual) entry for one network device contained
+ by the host. The hrDeviceIndex in the index
+ represents the entry in the hrDeviceTable that
+ corresponds to the hrNetworkEntry.
+
+ As an example of how objects in this table are named,
+ an instance of the hrNetworkIfIndex object might be
+ named hrNetworkIfIndex.3"
+ INDEX { hrDeviceIndex }
+ ::= { hrNetworkTable 1 }
+
+HrNetworkEntry ::= SEQUENCE {
+ hrNetworkIfIndex InterfaceIndexOrZero
+ }
+
+hrNetworkIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of ifIndex which corresponds to this
+ network device. If this device is not represented in
+ the ifTable, then this value shall be zero."
+ ::= { hrNetworkEntry 1 }
+
+hrPrinterTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HrPrinterEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The (conceptual) table of printers local to the host.
+
+ Note that this table is potentially sparse: a
+ (conceptual) entry exists only if the correspondent
+ value of the hrDeviceType object is
+ `hrDevicePrinter'."
+ ::= { hrDevice 5 }
+
+hrPrinterEntry OBJECT-TYPE
+ SYNTAX HrPrinterEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A (conceptual) entry for one printer local to the
+ host. The hrDeviceIndex in the index represents the
+ entry in the hrDeviceTable that corresponds to the
+ hrPrinterEntry.
+
+ As an example of how objects in this table are named,
+ an instance of the hrPrinterStatus object might be
+ named hrPrinterStatus.3"
+ INDEX { hrDeviceIndex }
+ ::= { hrPrinterTable 1 }
+
+HrPrinterEntry ::= SEQUENCE {
+ hrPrinterStatus INTEGER,
+ hrPrinterDetectedErrorState OCTET STRING
+ }
+
+hrPrinterStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ unknown(2),
+ idle(3),
+ printing(4),
+ warmup(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The current status of this printer device."
+ ::= { hrPrinterEntry 1 }
+
+hrPrinterDetectedErrorState OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object represents any error conditions detected
+ by the printer. The error conditions are encoded as
+ bits in an octet string, with the following
+ definitions:
+
+ Condition Bit #
+
+ lowPaper 0
+
+ noPaper 1
+ lowToner 2
+ noToner 3
+ doorOpen 4
+ jammed 5
+ offline 6
+ serviceRequested 7
+ inputTrayMissing 8
+ outputTrayMissing 9
+ markerSupplyMissing 10
+ outputNearFull 11
+ outputFull 12
+ inputTrayEmpty 13
+ overduePreventMaint 14
+
+ Bits are numbered starting with the most significant
+ bit of the first byte being bit 0, the least
+ significant bit of the first byte being bit 7, the
+ most significant bit of the second byte being bit 8,
+ and so on. A one bit encodes that the condition was
+ detected, while a zero bit encodes that the condition
+ was not detected.
+
+ This object is useful for alerting an operator to
+ specific warning or error conditions that may occur,
+ especially those requiring human intervention."
+ ::= { hrPrinterEntry 2 }
+
+hrDiskStorageTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HrDiskStorageEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The (conceptual) table of long-term storage devices
+ contained by the host. In particular, disk devices
+ accessed remotely over a network are not included
+ here.
+
+ Note that this table is potentially sparse: a
+ (conceptual) entry exists only if the correspondent
+ value of the hrDeviceType object is
+ `hrDeviceDiskStorage'."
+ ::= { hrDevice 6 }
+
+hrDiskStorageEntry OBJECT-TYPE
+ SYNTAX HrDiskStorageEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A (conceptual) entry for one long-term storage device
+ contained by the host. The hrDeviceIndex in the index
+ represents the entry in the hrDeviceTable that
+ corresponds to the hrDiskStorageEntry. As an example,
+ an instance of the hrDiskStorageCapacity object might
+ be named hrDiskStorageCapacity.3"
+ INDEX { hrDeviceIndex }
+ ::= { hrDiskStorageTable 1 }
+
+HrDiskStorageEntry ::= SEQUENCE {
+ hrDiskStorageAccess INTEGER,
+ hrDiskStorageMedia INTEGER,
+ hrDiskStorageRemoveble TruthValue,
+ hrDiskStorageCapacity KBytes
+ }
+
+hrDiskStorageAccess OBJECT-TYPE
+ SYNTAX INTEGER {
+ readWrite(1),
+ readOnly(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An indication if this long-term storage device is
+ readable and writable or only readable. This should
+ reflect the media type, any write-protect mechanism,
+ and any device configuration that affects the entire
+ device."
+ ::= { hrDiskStorageEntry 1 }
+
+hrDiskStorageMedia OBJECT-TYPE
+ SYNTAX INTEGER {
+ other(1),
+ unknown(2),
+ hardDisk(3),
+ floppyDisk(4),
+ opticalDiskROM(5),
+ opticalDiskWORM(6), -- Write Once Read Many
+ opticalDiskRW(7),
+ ramDisk(8)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An indication of the type of media used in this long-
+ term storage device."
+ ::= { hrDiskStorageEntry 2 }
+
+hrDiskStorageRemoveble OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Denotes whether or not the disk media may be removed
+ from the drive."
+ ::= { hrDiskStorageEntry 3 }
+
+hrDiskStorageCapacity OBJECT-TYPE
+ SYNTAX KBytes
+ UNITS "KBytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total size for this long-term storage device. If
+ the media is removable and is currently removed, this
+ value should be zero."
+ ::= { hrDiskStorageEntry 4 }
+
+hrPartitionTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HrPartitionEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The (conceptual) table of partitions for long-term
+ storage devices contained by the host. In particular,
+ partitions accessed remotely over a network are not
+ included here."
+ ::= { hrDevice 7 }
+
+hrPartitionEntry OBJECT-TYPE
+ SYNTAX HrPartitionEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A (conceptual) entry for one partition. The
+ hrDeviceIndex in the index represents the entry in the
+ hrDeviceTable that corresponds to the
+ hrPartitionEntry.
+
+ As an example of how objects in this table are named,
+ an instance of the hrPartitionSize object might be
+ named hrPartitionSize.3.1"
+ INDEX { hrDeviceIndex, hrPartitionIndex }
+ ::= { hrPartitionTable 1 }
+
+HrPartitionEntry ::= SEQUENCE {
+ hrPartitionIndex Integer32,
+ hrPartitionLabel InternationalDisplayString,
+ hrPartitionID OCTET STRING,
+ hrPartitionSize KBytes,
+ hrPartitionFSIndex Integer32
+ }
+
+hrPartitionIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A unique value for each partition on this long-term
+ storage device. The value for each long-term storage
+ device must remain constant at least from one re-
+ initialization of the agent to the next re-
+ initialization."
+ ::= { hrPartitionEntry 1 }
+
+hrPartitionLabel OBJECT-TYPE
+ SYNTAX InternationalDisplayString (SIZE (0..128))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A textual description of this partition."
+ ::= { hrPartitionEntry 2 }
+
+hrPartitionID OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A descriptor which uniquely represents this partition
+ to the responsible operating system. On some systems,
+ this might take on a binary representation."
+ ::= { hrPartitionEntry 3 }
+
+hrPartitionSize OBJECT-TYPE
+ SYNTAX KBytes
+ UNITS "KBytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The size of this partition."
+ ::= { hrPartitionEntry 4 }
+
+hrPartitionFSIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The index of the file system mounted on this
+ partition. If no file system is mounted on this
+ partition, then this value shall be zero. Note that
+ multiple partitions may point to one file system,
+ denoting that that file system resides on those
+ partitions. Multiple file systems may not reside on
+ one partition."
+ ::= { hrPartitionEntry 5 }
+
+-- The File System Table
+
+-- Registration point for popular File System types,
+-- for use with hrFSType. These are defined in the
+-- HOST-RESOURCES-TYPES module.
+hrFSTypes OBJECT IDENTIFIER ::= { hrDevice 9 }
+
+hrFSTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HrFSEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The (conceptual) table of file systems local to this
+ host or remotely mounted from a file server. File
+ systems that are in only one user's environment on a
+ multi-user system will not be included in this table."
+ ::= { hrDevice 8 }
+
+hrFSEntry OBJECT-TYPE
+ SYNTAX HrFSEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A (conceptual) entry for one file system local to
+ this host or remotely mounted from a file server.
+ File systems that are in only one user's environment
+ on a multi-user system will not be included in this
+ table.
+
+ As an example of how objects in this table are named,
+ an instance of the hrFSMountPoint object might be
+ named hrFSMountPoint.3"
+ INDEX { hrFSIndex }
+ ::= { hrFSTable 1 }
+
+HrFSEntry ::= SEQUENCE {
+ hrFSIndex Integer32,
+ hrFSMountPoint InternationalDisplayString,
+ hrFSRemoteMountPoint InternationalDisplayString,
+ hrFSType AutonomousType,
+ hrFSAccess INTEGER,
+ hrFSBootable TruthValue,
+ hrFSStorageIndex Integer32,
+ hrFSLastFullBackupDate DateAndTime,
+ hrFSLastPartialBackupDate DateAndTime
+ }
+
+hrFSIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A unique value for each file system local to this
+ host. The value for each file system must remain
+ constant at least from one re-initialization of the
+ agent to the next re-initialization."
+ ::= { hrFSEntry 1 }
+
+hrFSMountPoint OBJECT-TYPE
+ SYNTAX InternationalDisplayString (SIZE(0..128))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The path name of the root of this file system."
+ ::= { hrFSEntry 2 }
+
+hrFSRemoteMountPoint OBJECT-TYPE
+ SYNTAX InternationalDisplayString (SIZE(0..128))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A description of the name and/or address of the
+ server that this file system is mounted from. This
+ may also include parameters such as the mount point on
+ the remote file system. If this is not a remote file
+ system, this string should have a length of zero."
+ ::= { hrFSEntry 3 }
+
+hrFSType OBJECT-TYPE
+ SYNTAX AutonomousType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of this object identifies the type of this
+ file system."
+ ::= { hrFSEntry 4 }
+
+hrFSAccess OBJECT-TYPE
+ SYNTAX INTEGER {
+ readWrite(1),
+ readOnly(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An indication if this file system is logically
+ configured by the operating system to be readable and
+ writable or only readable. This does not represent
+ any local access-control policy, except one that is
+ applied to the file system as a whole."
+ ::= { hrFSEntry 5 }
+
+hrFSBootable OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A flag indicating whether this file system is
+ bootable."
+ ::= { hrFSEntry 6 }
+
+hrFSStorageIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The index of the hrStorageEntry that represents
+ information about this file system. If there is no
+ such information available, then this value shall be
+ zero. The relevant storage entry will be useful in
+ tracking the percent usage of this file system and
+ diagnosing errors that may occur when it runs out of
+ space."
+ ::= { hrFSEntry 7 }
+
+hrFSLastFullBackupDate OBJECT-TYPE
+ SYNTAX DateAndTime
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The last date at which this complete file system was
+
+ copied to another storage device for backup. This
+ information is useful for ensuring that backups are
+ being performed regularly.
+
+ If this information is not known, then this variable
+ shall have the value corresponding to January 1, year
+ 0000, 00:00:00.0, which is encoded as
+ (hex)'00 00 01 01 00 00 00 00'."
+ ::= { hrFSEntry 8 }
+
+hrFSLastPartialBackupDate OBJECT-TYPE
+ SYNTAX DateAndTime
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The last date at which a portion of this file system
+ was copied to another storage device for backup. This
+ information is useful for ensuring that backups are
+ being performed regularly.
+
+ If this information is not known, then this variable
+ shall have the value corresponding to January 1, year
+ 0000, 00:00:00.0, which is encoded as
+ (hex)'00 00 01 01 00 00 00 00'."
+ ::= { hrFSEntry 9 }
+
+-- The Host Resources Running Software Group
+--
+-- The hrSWRunTable contains an entry for each distinct piece of
+-- software that is running or loaded into physical or virtual
+-- memory in preparation for running. This includes the host's
+-- operating system, device drivers, and applications.
+
+hrSWOSIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of the hrSWRunIndex for the hrSWRunEntry
+ that represents the primary operating system running
+ on this host. This object is useful for quickly and
+ uniquely identifying that primary operating system."
+ ::= { hrSWRun 1 }
+
+hrSWRunTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HrSWRunEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The (conceptual) table of software running on the
+ host."
+ ::= { hrSWRun 2 }
+
+hrSWRunEntry OBJECT-TYPE
+ SYNTAX HrSWRunEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A (conceptual) entry for one piece of software
+ running on the host Note that because the installed
+ software table only contains information for software
+ stored locally on this host, not every piece of
+ running software will be found in the installed
+ software table. This is true of software that was
+ loaded and run from a non-local source, such as a
+ network-mounted file system.
+
+ As an example of how objects in this table are named,
+ an instance of the hrSWRunName object might be named
+ hrSWRunName.1287"
+ INDEX { hrSWRunIndex }
+ ::= { hrSWRunTable 1 }
+
+HrSWRunEntry ::= SEQUENCE {
+ hrSWRunIndex Integer32,
+ hrSWRunName InternationalDisplayString,
+ hrSWRunID ProductID,
+ hrSWRunPath InternationalDisplayString,
+ hrSWRunParameters InternationalDisplayString,
+ hrSWRunType INTEGER,
+ hrSWRunStatus INTEGER
+ }
+
+hrSWRunIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A unique value for each piece of software running on
+ the host. Wherever possible, this should be the
+ system's native, unique identification number."
+ ::= { hrSWRunEntry 1 }
+
+hrSWRunName OBJECT-TYPE
+ SYNTAX InternationalDisplayString (SIZE (0..64))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A textual description of this running piece of
+ software, including the manufacturer, revision, and
+ the name by which it is commonly known. If this
+ software was installed locally, this should be the
+ same string as used in the corresponding
+ hrSWInstalledName."
+ ::= { hrSWRunEntry 2 }
+
+hrSWRunID OBJECT-TYPE
+ SYNTAX ProductID
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The product ID of this running piece of software."
+ ::= { hrSWRunEntry 3 }
+
+hrSWRunPath OBJECT-TYPE
+ SYNTAX InternationalDisplayString (SIZE(0..128))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A description of the location on long-term storage
+ (e.g. a disk drive) from which this software was
+ loaded."
+ ::= { hrSWRunEntry 4 }
+
+hrSWRunParameters OBJECT-TYPE
+ SYNTAX InternationalDisplayString (SIZE(0..128))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A description of the parameters supplied to this
+ software when it was initially loaded."
+ ::= { hrSWRunEntry 5 }
+
+hrSWRunType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(1),
+ operatingSystem(2),
+ deviceDriver(3),
+ application(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of this software."
+ ::= { hrSWRunEntry 6 }
+
+hrSWRunStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ running(1),
+ runnable(2), -- waiting for resource
+ -- (i.e., CPU, memory, IO)
+ notRunnable(3), -- loaded but waiting for event
+ invalid(4) -- not loaded
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The status of this running piece of software.
+ Setting this value to invalid(4) shall cause this
+ software to stop running and to be unloaded. Sets to
+ other values are not valid."
+ ::= { hrSWRunEntry 7 }
+
+-- The Host Resources Running Software Performance Group
+--
+-- The hrSWRunPerfTable contains an entry corresponding to
+-- each entry in the hrSWRunTable.
+
+hrSWRunPerfTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HrSWRunPerfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The (conceptual) table of running software
+ performance metrics."
+ ::= { hrSWRunPerf 1 }
+
+hrSWRunPerfEntry OBJECT-TYPE
+ SYNTAX HrSWRunPerfEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A (conceptual) entry containing software performance
+ metrics. As an example, an instance of the
+ hrSWRunPerfCPU object might be named
+ hrSWRunPerfCPU.1287"
+ AUGMENTS { hrSWRunEntry } -- This table augments information in
+ -- the hrSWRunTable.
+ ::= { hrSWRunPerfTable 1 }
+
+HrSWRunPerfEntry ::= SEQUENCE {
+ hrSWRunPerfCPU Integer32,
+ hrSWRunPerfMem KBytes
+}
+
+hrSWRunPerfCPU OBJECT-TYPE
+ SYNTAX Integer32 (0..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of centi-seconds of the total system's CPU
+ resources consumed by this process. Note that on a
+ multi-processor system, this value may increment by
+ more than one centi-second in one centi-second of real
+ (wall clock) time."
+ ::= { hrSWRunPerfEntry 1 }
+
+hrSWRunPerfMem OBJECT-TYPE
+ SYNTAX KBytes
+ UNITS "KBytes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total amount of real system memory allocated to
+ this process."
+ ::= { hrSWRunPerfEntry 2 }
+
+-- The Host Resources Installed Software Group
+--
+-- The hrSWInstalledTable contains an entry for each piece
+-- of software installed in long-term storage (e.g. a disk
+-- drive) locally on this host. Note that this does not
+-- include software loadable remotely from a network
+-- server.
+--
+-- Different implementations may track software in varying
+-- ways. For example, while some implementations may track
+-- executable files as distinct pieces of software, other
+-- implementations may use other strategies such as keeping
+-- track of software "packages" (e.g., related groups of files)
+-- or keeping track of system or application "patches".
+--
+-- This table is useful for identifying and inventorying
+-- software on a host and for diagnosing incompatibility
+-- and version mismatch problems between various pieces
+-- of hardware and software.
+
+hrSWInstalledLastChange OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when an entry in the
+ hrSWInstalledTable was last added, renamed, or
+ deleted. Because this table is likely to contain many
+ entries, polling of this object allows a management
+ station to determine when re-downloading of the table
+ might be useful."
+ ::= { hrSWInstalled 1 }
+
+hrSWInstalledLastUpdateTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when the hrSWInstalledTable
+ was last completely updated. Because caching of this
+ data will be a popular implementation strategy,
+ retrieval of this object allows a management station
+ to obtain a guarantee that no data in this table is
+ older than the indicated time."
+ ::= { hrSWInstalled 2 }
+
+hrSWInstalledTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HrSWInstalledEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The (conceptual) table of software installed on this
+ host."
+ ::= { hrSWInstalled 3 }
+
+hrSWInstalledEntry OBJECT-TYPE
+ SYNTAX HrSWInstalledEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A (conceptual) entry for a piece of software
+ installed on this host.
+
+ As an example of how objects in this table are named,
+ an instance of the hrSWInstalledName object might be
+ named hrSWInstalledName.96"
+ INDEX { hrSWInstalledIndex }
+ ::= { hrSWInstalledTable 1 }
+
+HrSWInstalledEntry ::= SEQUENCE {
+ hrSWInstalledIndex Integer32,
+ hrSWInstalledName InternationalDisplayString,
+ hrSWInstalledID ProductID,
+ hrSWInstalledType INTEGER,
+ hrSWInstalledDate DateAndTime
+}
+
+hrSWInstalledIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A unique value for each piece of software installed
+ on the host. This value shall be in the range from 1
+ to the number of pieces of software installed on the
+ host."
+ ::= { hrSWInstalledEntry 1 }
+
+hrSWInstalledName OBJECT-TYPE
+ SYNTAX InternationalDisplayString (SIZE (0..64))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A textual description of this installed piece of
+ software, including the manufacturer, revision, the
+ name by which it is commonly known, and optionally,
+ its serial number."
+ ::= { hrSWInstalledEntry 2 }
+
+hrSWInstalledID OBJECT-TYPE
+ SYNTAX ProductID
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The product ID of this installed piece of software."
+ ::= { hrSWInstalledEntry 3 }
+
+hrSWInstalledType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unknown(1),
+ operatingSystem(2),
+ deviceDriver(3),
+ application(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of this software."
+ ::= { hrSWInstalledEntry 4 }
+
+hrSWInstalledDate OBJECT-TYPE
+ SYNTAX DateAndTime
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The last-modification date of this application as it
+ would appear in a directory listing.
+
+ If this information is not known, then this variable
+ shall have the value corresponding to January 1, year
+ 0000, 00:00:00.0, which is encoded as
+ (hex)'00 00 01 01 00 00 00 00'."
+ ::= { hrSWInstalledEntry 5 }
+
+-- Conformance information
+
+hrMIBCompliances OBJECT IDENTIFIER ::= { hrMIBAdminInfo 2 }
+hrMIBGroups OBJECT IDENTIFIER ::= { hrMIBAdminInfo 3 }
+
+-- Compliance Statements
+hrMIBCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The requirements for conformance to the Host Resources MIB."
+ MODULE -- this module
+ MANDATORY-GROUPS { hrSystemGroup, hrStorageGroup,
+ hrDeviceGroup }
+
+ OBJECT hrSystemDate
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT hrSystemInitialLoadDevice
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT hrSystemInitialLoadParameters
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT hrStorageSize
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT hrFSLastFullBackupDate
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ OBJECT hrFSLastPartialBackupDate
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ GROUP hrSWRunGroup
+ DESCRIPTION
+ "The Running Software Group. Implementation
+ of this group is mandatory only when the
+ hrSWRunPerfGroup is implemented."
+
+ OBJECT hrSWRunStatus
+ MIN-ACCESS read-only
+ DESCRIPTION
+ "Write access is not required."
+
+ GROUP hrSWRunPerfGroup
+ DESCRIPTION
+ "The Running Software Performance Group.
+ Implementation of this group is at the discretion
+ of the implementor."
+
+ GROUP hrSWInstalledGroup
+ DESCRIPTION
+ "The Installed Software Group.
+ Implementation of this group is at the discretion
+ of the implementor."
+ ::= { hrMIBCompliances 1 }
+
+ hrSystemGroup OBJECT-GROUP
+ OBJECTS {
+ hrSystemUptime, hrSystemDate,
+ hrSystemInitialLoadDevice,
+ hrSystemInitialLoadParameters,
+ hrSystemNumUsers, hrSystemProcesses,
+ hrSystemMaxProcesses
+ }
+ STATUS current
+ DESCRIPTION
+ "The Host Resources System Group."
+ ::= { hrMIBGroups 1 }
+
+ hrStorageGroup OBJECT-GROUP
+ OBJECTS {
+ hrMemorySize, hrStorageIndex, hrStorageType,
+ hrStorageDescr, hrStorageAllocationUnits,
+ hrStorageSize, hrStorageUsed,
+ hrStorageAllocationFailures
+ }
+ STATUS current
+ DESCRIPTION
+ "The Host Resources Storage Group."
+ ::= { hrMIBGroups 2 }
+
+ hrDeviceGroup OBJECT-GROUP
+ OBJECTS {
+ hrDeviceIndex, hrDeviceType, hrDeviceDescr,
+ hrDeviceID, hrDeviceStatus, hrDeviceErrors,
+ hrProcessorFrwID, hrProcessorLoad,
+ hrNetworkIfIndex, hrPrinterStatus,
+ hrPrinterDetectedErrorState,
+ hrDiskStorageAccess, hrDiskStorageMedia,
+ hrDiskStorageRemoveble, hrDiskStorageCapacity,
+ hrPartitionIndex, hrPartitionLabel,
+ hrPartitionID, hrPartitionSize,
+ hrPartitionFSIndex, hrFSIndex, hrFSMountPoint,
+ hrFSRemoteMountPoint, hrFSType, hrFSAccess,
+ hrFSBootable, hrFSStorageIndex,
+ hrFSLastFullBackupDate,
+ hrFSLastPartialBackupDate
+ }
+ STATUS current
+ DESCRIPTION
+ "The Host Resources Device Group."
+ ::= { hrMIBGroups 3 }
+
+ hrSWRunGroup OBJECT-GROUP
+ OBJECTS {
+ hrSWOSIndex, hrSWRunIndex, hrSWRunName,
+ hrSWRunID, hrSWRunPath, hrSWRunParameters,
+ hrSWRunType, hrSWRunStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "The Host Resources Running Software Group."
+ ::= { hrMIBGroups 4 }
+
+ hrSWRunPerfGroup OBJECT-GROUP
+ OBJECTS { hrSWRunPerfCPU, hrSWRunPerfMem }
+ STATUS current
+ DESCRIPTION
+ "The Host Resources Running Software
+ Performance Group."
+ ::= { hrMIBGroups 5 }
+
+ hrSWInstalledGroup OBJECT-GROUP
+ OBJECTS {
+ hrSWInstalledLastChange,
+ hrSWInstalledLastUpdateTime,
+ hrSWInstalledIndex, hrSWInstalledName,
+ hrSWInstalledID, hrSWInstalledType,
+ hrSWInstalledDate
+ }
+ STATUS current
+ DESCRIPTION
+ "The Host Resources Installed Software Group."
+ ::= { hrMIBGroups 6 }
+
+END