diff options
Diffstat (limited to 'data/mibs/NETWORK-SERVICES-MIB.txt')
| -rw-r--r-- | data/mibs/NETWORK-SERVICES-MIB.txt | 626 |
1 files changed, 0 insertions, 626 deletions
diff --git a/data/mibs/NETWORK-SERVICES-MIB.txt b/data/mibs/NETWORK-SERVICES-MIB.txt deleted file mode 100644 index 0f2cabecb..000000000 --- a/data/mibs/NETWORK-SERVICES-MIB.txt +++ /dev/null @@ -1,626 +0,0 @@ -NETWORK-SERVICES-MIB DEFINITIONS ::= BEGIN - -IMPORTS - OBJECT-TYPE, Counter32, Gauge32, MODULE-IDENTITY, mib-2 - FROM SNMPv2-SMI - TimeStamp, TEXTUAL-CONVENTION - FROM SNMPv2-TC - MODULE-COMPLIANCE, OBJECT-GROUP - FROM SNMPv2-CONF - SnmpAdminString - FROM SNMP-FRAMEWORK-MIB; - -application MODULE-IDENTITY - LAST-UPDATED "200003030000Z" - ORGANIZATION "IETF Mail and Directory Management Working Group" - - CONTACT-INFO - " Ned Freed - - Postal: Innosoft International, Inc. - 1050 Lakes Drive - West Covina, CA 91790 - US - - Tel: +1 626 919 3600 - Fax: +1 626 919 3614 - - E-Mail: ned.freed@innosoft.com" - DESCRIPTION - "The MIB module describing network service applications" - REVISION "200003030000Z" - DESCRIPTION - "This revision, published in RFC 2788, changes a number of - DisplayStrings to SnmpAdminStrings. Note that this change - is not strictly supported by SMIv2. However, the alternative - of deprecating the old objects and defining new objects - would have a more adverse impact on backward compatibility - and interoperability, given the particular semantics of - these objects. The defining reference for distinguished - names has also been updated from RFC 1779 to RFC 2253." - REVISION "199905120000Z" - DESCRIPTION - "This revision fixes a few small technical problems found - in previous versions, mostly in regards to the conformance - groups for different versions of this MIB. No changes have - been made to the objects this MIB defines since RFC 2248." - REVISION "199708170000Z" - DESCRIPTION - "This revision, published in RFC 2248, adds the - applDescription and applURL objects, adds the quiescing - state to the applOperStatus object and renames the MIB - from the APPLICATION-MIB to the NETWORK-SERVICE-MIB." - REVISION "199311280000Z" - DESCRIPTION - "The original version of this MIB was published in RFC 1565" - ::= {mib-2 27} - --- Textual conventions - --- DistinguishedName is used to refer to objects in the --- directory. - -DistinguishedName ::= TEXTUAL-CONVENTION - DISPLAY-HINT "255a" - STATUS current - DESCRIPTION - "A Distinguished Name represented in accordance with - RFC 2253, presented in the UTF-8 charset defined in - RFC 2279." - SYNTAX OCTET STRING (SIZE (0..255)) - --- Uniform Resource Locators are stored in URLStrings. - -URLString ::= TEXTUAL-CONVENTION - DISPLAY-HINT "255a" - STATUS current - DESCRIPTION - "A Uniform Resource Locator represented in accordance - with RFCs 1738 and 2368, presented in the NVT ASCII - charset defined in RFC 854." - SYNTAX OCTET STRING (SIZE (0..255)) - --- The basic applTable contains a list of the application --- entities. - -applTable OBJECT-TYPE - SYNTAX SEQUENCE OF ApplEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The table holding objects which apply to all different - kinds of applications providing network services. - Each network service application capable of being - monitored should have a single entry in this table." - ::= {application 1} - -applEntry OBJECT-TYPE - SYNTAX ApplEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "An entry associated with a single network service - application." - INDEX {applIndex} - ::= {applTable 1} - -ApplEntry ::= SEQUENCE { - applIndex - INTEGER, - applName - SnmpAdminString, - applDirectoryName - - DistinguishedName, - applVersion - SnmpAdminString, - applUptime - TimeStamp, - applOperStatus - INTEGER, - applLastChange - TimeStamp, - applInboundAssociations - Gauge32, - applOutboundAssociations - Gauge32, - applAccumulatedInboundAssociations - Counter32, - applAccumulatedOutboundAssociations - Counter32, - applLastInboundActivity - TimeStamp, - applLastOutboundActivity - TimeStamp, - applRejectedInboundAssociations - Counter32, - applFailedOutboundAssociations - Counter32, - applDescription - SnmpAdminString, - applURL - URLString -} - -applIndex OBJECT-TYPE - SYNTAX INTEGER (1..2147483647) - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "An index to uniquely identify the network service - application. This attribute is the index used for - lexicographic ordering of the table." - ::= {applEntry 1} - -applName OBJECT-TYPE - SYNTAX SnmpAdminString - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The name the network service application chooses to be - known by." - ::= {applEntry 2} - -applDirectoryName OBJECT-TYPE - SYNTAX DistinguishedName - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The Distinguished Name of the directory entry where - static information about this application is stored. - An empty string indicates that no information about - the application is available in the directory." - ::= {applEntry 3} - -applVersion OBJECT-TYPE - SYNTAX SnmpAdminString - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The version of network service application software. - This field is usually defined by the vendor of the - network service application software." - ::= {applEntry 4} -applUptime OBJECT-TYPE - SYNTAX TimeStamp - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The value of sysUpTime at the time the network service - application was last initialized. If the application was - last initialized prior to the last initialization of the - network management subsystem, then this object contains - a zero value." - ::= {applEntry 5} - -applOperStatus OBJECT-TYPE - SYNTAX INTEGER { - up(1), - down(2), - halted(3), - congested(4), - restarting(5), - quiescing(6) - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Indicates the operational status of the network service - application. 'down' indicates that the network service is - - not available. 'up' indicates that the network service - is operational and available. 'halted' indicates that the - service is operational but not available. 'congested' - indicates that the service is operational but no additional - inbound associations can be accommodated. 'restarting' - indicates that the service is currently unavailable but is - in the process of restarting and will be available soon. - 'quiescing' indicates that service is currently operational - but is in the process of shutting down. Additional inbound - associations may be rejected by applications in the - 'quiescing' state." - ::= {applEntry 6} - -applLastChange OBJECT-TYPE - SYNTAX TimeStamp - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The value of sysUpTime at the time the network service - application entered its current operational state. If - the current state was entered prior to the last - initialization of the local network management subsystem, - then this object contains a zero value." - ::= {applEntry 7} - -applInboundAssociations OBJECT-TYPE - SYNTAX Gauge32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of current associations to the network service - application, where it is the responder. An inbound - association occurs when another application successfully - connects to this one." - ::= {applEntry 8} - -applOutboundAssociations OBJECT-TYPE - SYNTAX Gauge32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of current associations to the network service - application, where it is the initiator. An outbound - association occurs when this application successfully - connects to another one." - ::= {applEntry 9} - -applAccumulatedInboundAssociations OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The total number of associations to the application entity - since application initialization, where it was the responder." - ::= {applEntry 10} - -applAccumulatedOutboundAssociations OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The total number of associations to the application entity - since application initialization, where it was the initiator." - ::= {applEntry 11} - -applLastInboundActivity OBJECT-TYPE - SYNTAX TimeStamp - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The value of sysUpTime at the time this application last - had an inbound association. If the last association - occurred prior to the last initialization of the network - subsystem, then this object contains a zero value." - ::= {applEntry 12} - -applLastOutboundActivity OBJECT-TYPE - SYNTAX TimeStamp - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The value of sysUpTime at the time this application last - had an outbound association. If the last association - occurred prior to the last initialization of the network - subsystem, then this object contains a zero value." - ::= {applEntry 13} - -applRejectedInboundAssociations OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The total number of inbound associations the application - entity has rejected, since application initialization. - Rejected associations are not counted in the accumulated - association totals. Note that this only counts - - associations the application entity has rejected itself; - it does not count rejections that occur at lower layers - of the network. Thus, this counter may not reflect the - true number of failed inbound associations." - ::= {applEntry 14} - -applFailedOutboundAssociations OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The total number associations where the application entity - is initiator and association establishment has failed, - since application initialization. Failed associations are - not counted in the accumulated association totals." - ::= {applEntry 15} - -applDescription OBJECT-TYPE - SYNTAX SnmpAdminString - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A text description of the application. This information - is intended to identify and briefly describe the - application in a status display." - ::= {applEntry 16} - -applURL OBJECT-TYPE - SYNTAX URLString - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A URL pointing to a description of the application. - This information is intended to identify and describe - the application in a status display." - ::= {applEntry 17} - --- The assocTable augments the information in the applTable --- with information about associations. Note that two levels --- of compliance are specified below, depending on whether --- association monitoring is mandated. - -assocTable OBJECT-TYPE - SYNTAX SEQUENCE OF AssocEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The table holding a set of all active application - - associations." - ::= {application 2} - -assocEntry OBJECT-TYPE - SYNTAX AssocEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "An entry associated with an association for a network - service application." - INDEX {applIndex, assocIndex} - ::= {assocTable 1} - -AssocEntry ::= SEQUENCE { - assocIndex - INTEGER, - assocRemoteApplication - SnmpAdminString, - assocApplicationProtocol - OBJECT IDENTIFIER, - assocApplicationType - INTEGER, - assocDuration - TimeStamp -} - -assocIndex OBJECT-TYPE - SYNTAX INTEGER (1..2147483647) - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "An index to uniquely identify each association for a network - service application. This attribute is the index that is - used for lexicographic ordering of the table. Note that the - table is also indexed by the applIndex." - ::= {assocEntry 1} - -assocRemoteApplication OBJECT-TYPE - SYNTAX SnmpAdminString - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The name of the system running remote network service - application. For an IP-based application this should be - either a domain name or IP address. For an OSI application - it should be the string encoded distinguished name of the - managed object. For X.400(1984) MTAs which do not have a - Distinguished Name, the RFC 2156 syntax 'mta in - - globalid' used in X400-Received: fields can be used. Note, - however, that not all connections an MTA makes are - necessarily to another MTA." - ::= {assocEntry 2} - -assocApplicationProtocol OBJECT-TYPE - SYNTAX OBJECT IDENTIFIER - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "An identification of the protocol being used for the - application. For an OSI Application, this will be the - Application Context. For Internet applications, OID - values of the form {applTCPProtoID port} or {applUDPProtoID - port} are used for TCP-based and UDP-based protocols, - respectively. In either case 'port' corresponds to the - primary port number being used by the protocol. The - usual IANA procedures may be used to register ports for - new protocols." - ::= {assocEntry 3} - -assocApplicationType OBJECT-TYPE - SYNTAX INTEGER { - uainitiator(1), - uaresponder(2), - peerinitiator(3), - peerresponder(4)} - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This indicates whether the remote application is some type of - client making use of this network service (e.g., a Mail User - Agent) or a server acting as a peer. Also indicated is whether - the remote end initiated an incoming connection to the network - service or responded to an outgoing connection made by the - local application. MTAs and messaging gateways are - considered to be peers for the purposes of this variable." - ::= {assocEntry 4} - -assocDuration OBJECT-TYPE - SYNTAX TimeStamp - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The value of sysUpTime at the time this association was - started. If this association started prior to the last - initialization of the network subsystem, then this - object contains a zero value." - ::= {assocEntry 5} - --- Conformance information - -applConformance OBJECT IDENTIFIER ::= {application 3} - -applGroups OBJECT IDENTIFIER ::= {applConformance 1} -applCompliances OBJECT IDENTIFIER ::= {applConformance 2} - --- Compliance statements - -applCompliance MODULE-COMPLIANCE - STATUS obsolete - DESCRIPTION - "The compliance statement for RFC 1565 implementations - which support the Network Services Monitoring MIB - for basic monitoring of network service applications. - This is the basic compliance statement for RFC 1565." - MODULE - MANDATORY-GROUPS {applRFC1565Group} - ::= {applCompliances 1} - -assocCompliance MODULE-COMPLIANCE - STATUS obsolete - DESCRIPTION - "The compliance statement for RFC 1565 implementations - which support the Network Services Monitoring MIB - for basic monitoring of network service applications - and their associations." - MODULE - MANDATORY-GROUPS {applRFC1565Group, assocRFC1565Group} - ::= {applCompliances 2} - -applRFC2248Compliance MODULE-COMPLIANCE - STATUS deprecated - DESCRIPTION - "The compliance statement for RFC 2248 implementations - which support the Network Services Monitoring MIB - for basic monitoring of network service applications." - MODULE - MANDATORY-GROUPS {applRFC2248Group} - ::= {applCompliances 3} - -assocRFC2248Compliance MODULE-COMPLIANCE - STATUS deprecated - DESCRIPTION - "The compliance statement for RFC 2248 implementations - - which support the Network Services Monitoring MIB for - basic monitoring of network service applications and - their associations." - MODULE - MANDATORY-GROUPS {applRFC2248Group, assocRFC2248Group} - ::= {applCompliances 4} - -applRFC2788Compliance MODULE-COMPLIANCE - STATUS current - DESCRIPTION - "The compliance statement for RFC 2788 implementations - which support the Network Services Monitoring MIB - for basic monitoring of network service applications." - MODULE - MANDATORY-GROUPS {applRFC2788Group} - ::= {applCompliances 5} - -assocRFC2788Compliance MODULE-COMPLIANCE - STATUS current - DESCRIPTION - "The compliance statement for RFC 2788 implementations - which support the Network Services Monitoring MIB for - basic monitoring of network service applications and - their associations." - MODULE - MANDATORY-GROUPS {applRFC2788Group, assocRFC2788Group} - ::= {applCompliances 6} - --- Units of conformance - -applRFC1565Group OBJECT-GROUP - OBJECTS { - applName, applVersion, applUptime, applOperStatus, - applLastChange, applInboundAssociations, - applOutboundAssociations, applAccumulatedInboundAssociations, - applAccumulatedOutboundAssociations, applLastInboundActivity, - applLastOutboundActivity, applRejectedInboundAssociations, - applFailedOutboundAssociations} - STATUS obsolete - DESCRIPTION - "A collection of objects providing basic monitoring of - network service applications. This is the original set - of such objects defined in RFC 1565." - ::= {applGroups 7} - -assocRFC1565Group OBJECT-GROUP - OBJECTS { - - assocRemoteApplication, assocApplicationProtocol, - assocApplicationType, assocDuration} - STATUS obsolete - DESCRIPTION - "A collection of objects providing basic monitoring of - network service applications' associations. This is the - original set of such objects defined in RFC 1565." - ::= {applGroups 2} - -applRFC2248Group OBJECT-GROUP - OBJECTS { - applName, applVersion, applUptime, applOperStatus, - applLastChange, applInboundAssociations, - applOutboundAssociations, applAccumulatedInboundAssociations, - applAccumulatedOutboundAssociations, applLastInboundActivity, - applLastOutboundActivity, applRejectedInboundAssociations, - applFailedOutboundAssociations, applDescription, applURL} - STATUS deprecated - DESCRIPTION - "A collection of objects providing basic monitoring of - network service applications. This group was originally - defined in RFC 2248; note that applDirectoryName is - missing." - ::= {applGroups 3} - -assocRFC2248Group OBJECT-GROUP - OBJECTS { - assocRemoteApplication, assocApplicationProtocol, - assocApplicationType, assocDuration} - STATUS deprecated - DESCRIPTION - "A collection of objects providing basic monitoring of - network service applications' associations. This group - was originally defined by RFC 2248." - ::= {applGroups 4} - -applRFC2788Group OBJECT-GROUP - OBJECTS { - applName, applDirectoryName, applVersion, applUptime, - applOperStatus, applLastChange, applInboundAssociations, - applOutboundAssociations, applAccumulatedInboundAssociations, - applAccumulatedOutboundAssociations, applLastInboundActivity, - applLastOutboundActivity, applRejectedInboundAssociations, - applFailedOutboundAssociations, applDescription, applURL} - STATUS current - DESCRIPTION - "A collection of objects providing basic monitoring of - network service applications. This is the appropriate - - group for RFC 2788 -- it adds the applDirectoryName object - missing in RFC 2248." - ::= {applGroups 5} - -assocRFC2788Group OBJECT-GROUP - OBJECTS { - assocRemoteApplication, assocApplicationProtocol, - assocApplicationType, assocDuration} - STATUS current - DESCRIPTION - "A collection of objects providing basic monitoring of - network service applications' associations. This is - the appropriate group for RFC 2788." - ::= {applGroups 6} - --- OIDs of the form {applTCPProtoID port} are intended to be used --- for TCP-based protocols that don't have OIDs assigned by other --- means. {applUDPProtoID port} serves the same purpose for --- UDP-based protocols. In either case 'port' corresponds to --- the primary port number being used by the protocol. For example, --- assuming no other OID is assigned for SMTP, an OID of --- {applTCPProtoID 25} could be used, since SMTP is a TCP-based --- protocol that uses port 25 as its primary port. - -applTCPProtoID OBJECT IDENTIFIER ::= {application 4} -applUDPProtoID OBJECT IDENTIFIER ::= {application 5} - -END |