diff options
Diffstat (limited to 'data/mibs/RIPv2-MIB.txt')
| -rw-r--r-- | data/mibs/RIPv2-MIB.txt | 530 |
1 files changed, 0 insertions, 530 deletions
diff --git a/data/mibs/RIPv2-MIB.txt b/data/mibs/RIPv2-MIB.txt deleted file mode 100644 index 6c92fb5f0..000000000 --- a/data/mibs/RIPv2-MIB.txt +++ /dev/null @@ -1,530 +0,0 @@ - RIPv2-MIB DEFINITIONS ::= BEGIN - - IMPORTS - MODULE-IDENTITY, OBJECT-TYPE, Counter32, - TimeTicks, IpAddress FROM SNMPv2-SMI - TEXTUAL-CONVENTION, RowStatus FROM SNMPv2-TC - MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF - mib-2 FROM RFC1213-MIB; - - -- This MIB module uses the extended OBJECT-TYPE macro as - -- defined in [9]. - - rip2 MODULE-IDENTITY - LAST-UPDATED "9407272253Z" -- Wed Jul 27 22:53:04 PDT 1994 - ORGANIZATION "IETF RIP-II Working Group" - CONTACT-INFO - " Fred Baker - Postal: Cisco Systems - 519 Lado Drive - Santa Barbara, California 93111 - Tel: +1 805 681 0115 - E-Mail: fbaker@cisco.com - - Postal: Gary Malkin - Xylogics, Inc. - 53 Third Avenue - Burlington, MA 01803 - - Phone: (617) 272-8140 - EMail: gmalkin@Xylogics.COM" - DESCRIPTION - "The MIB module to describe the RIP2 Version 2 Protocol" - ::= { mib-2 23 } - - -- RIP-2 Management Information Base - - -- the RouteTag type represents the contents of the - -- Route Domain field in the packet header or route entry. - -- The use of the Route Domain is deprecated. - - RouteTag ::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION - "the RouteTag type represents the contents of the Route Domain - field in the packet header or route entry" - SYNTAX OCTET STRING (SIZE (2)) - ---4.1 Global Counters - --- The RIP-2 Globals Group. --- Implementation of this group is mandatory for systems --- which implement RIP-2. - --- These counters are intended to facilitate debugging quickly --- changing routes or failing neighbors - -rip2Globals OBJECT IDENTIFIER ::= { rip2 1 } - - rip2GlobalRouteChanges OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of route changes made to the IP Route - Database by RIP. This does not include the refresh - of a route's age." - ::= { rip2Globals 1 } - - rip2GlobalQueries OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of responses sent to RIP queries - from other systems." - ::= { rip2Globals 2 } - ---4.2 RIP Interface Tables - --- RIP Interfaces Groups --- Implementation of these Groups is mandatory for systems --- which implement RIP-2. - --- The RIP Interface Status Table. - - rip2IfStatTable OBJECT-TYPE - SYNTAX SEQUENCE OF Rip2IfStatEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A list of subnets which require separate - status monitoring in RIP." - ::= { rip2 2 } - - rip2IfStatEntry OBJECT-TYPE - SYNTAX Rip2IfStatEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A Single Routing Domain in a single Subnet." - INDEX { rip2IfStatAddress } - ::= { rip2IfStatTable 1 } - - Rip2IfStatEntry ::= - SEQUENCE { - rip2IfStatAddress - IpAddress, - rip2IfStatRcvBadPackets - Counter32, - rip2IfStatRcvBadRoutes - Counter32, - rip2IfStatSentUpdates - Counter32, - rip2IfStatStatus - RowStatus - } - - rip2IfStatAddress OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The IP Address of this system on the indicated - subnet. For unnumbered interfaces, the value 0.0.0.N, - where the least significant 24 bits (N) is the ifIndex - for the IP Interface in network byte order." - ::= { rip2IfStatEntry 1 } - - rip2IfStatRcvBadPackets OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of RIP response packets received by - the RIP process which were subsequently discarded - for any reason (e.g. a version 0 packet, or an - unknown command type)." - ::= { rip2IfStatEntry 2 } - - rip2IfStatRcvBadRoutes OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of routes, in valid RIP packets, - which were ignored for any reason (e.g. unknown - address family, or invalid metric)." - ::= { rip2IfStatEntry 3 } - - rip2IfStatSentUpdates OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of triggered RIP updates actually - sent on this interface. This explicitly does - NOT include full updates sent containing new - information." - ::= { rip2IfStatEntry 4 } - - rip2IfStatStatus OBJECT-TYPE - SYNTAX RowStatus - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "Writing invalid has the effect of deleting - this interface." - ::= { rip2IfStatEntry 5 } - --- The RIP Interface Configuration Table. - - rip2IfConfTable OBJECT-TYPE - SYNTAX SEQUENCE OF Rip2IfConfEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A list of subnets which require separate - configuration in RIP." - ::= { rip2 3 } - - rip2IfConfEntry OBJECT-TYPE - SYNTAX Rip2IfConfEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A Single Routing Domain in a single Subnet." - INDEX { rip2IfConfAddress } - ::= { rip2IfConfTable 1 } - - Rip2IfConfEntry ::= - SEQUENCE { - rip2IfConfAddress - IpAddress, - rip2IfConfDomain - RouteTag, - rip2IfConfAuthType - INTEGER, - rip2IfConfAuthKey - OCTET STRING (SIZE(0..16)), - rip2IfConfSend - INTEGER, - rip2IfConfReceive - INTEGER, - rip2IfConfDefaultMetric - INTEGER, - rip2IfConfStatus - RowStatus, - rip2IfConfSrcAddress - IpAddress - } - - rip2IfConfAddress OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The IP Address of this system on the indicated - subnet. For unnumbered interfaces, the value 0.0.0.N, - where the least significant 24 bits (N) is the ifIndex - for the IP Interface in network byte order." - ::= { rip2IfConfEntry 1 } - - rip2IfConfDomain OBJECT-TYPE - SYNTAX RouteTag - MAX-ACCESS read-create - STATUS obsolete - DESCRIPTION - "Value inserted into the Routing Domain field - of all RIP packets sent on this interface." - DEFVAL { '0000'h } - ::= { rip2IfConfEntry 2 } - - rip2IfConfAuthType OBJECT-TYPE - SYNTAX INTEGER { - noAuthentication (1), - simplePassword (2), - md5 (3) - } - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The type of Authentication used on this - interface." - DEFVAL { noAuthentication } - ::= { rip2IfConfEntry 3 } - - rip2IfConfAuthKey OBJECT-TYPE - SYNTAX OCTET STRING (SIZE(0..16)) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The value to be used as the Authentication Key - whenever the corresponding instance of - rip2IfConfAuthType has a value other than - noAuthentication. A modification of the corresponding - instance of rip2IfConfAuthType does not modify - the rip2IfConfAuthKey value. If a string shorter - than 16 octets is supplied, it will be left- - justified and padded to 16 octets, on the right, - with nulls (0x00). - - Reading this object always results in an OCTET - STRING of length zero; authentication may not - be bypassed by reading the MIB object." - DEFVAL { ''h } - ::= { rip2IfConfEntry 4 } - - rip2IfConfSend OBJECT-TYPE - SYNTAX INTEGER { - doNotSend (1), - ripVersion1 (2), - rip1Compatible (3), - ripVersion2 (4), - ripV1Demand (5), - ripV2Demand (6) - } - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "What the router sends on this interface. - ripVersion1 implies sending RIP updates compliant - with RFC 1058. rip1Compatible implies - broadcasting RIP-2 updates using RFC 1058 route - subsumption rules. ripVersion2 implies - multicasting RIP-2 updates. ripV1Demand indicates - the use of Demand RIP on a WAN interface under RIP - Version 1 rules. ripV2Demand indicates the use of - Demand RIP on a WAN interface under Version 2 rules." - DEFVAL { rip1Compatible } - ::= { rip2IfConfEntry 5 } - - rip2IfConfReceive OBJECT-TYPE - SYNTAX INTEGER { - rip1 (1), - rip2 (2), - rip1OrRip2 (3), - doNotRecieve (4) - } - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "This indicates which version of RIP updates - are to be accepted. Note that rip2 and - rip1OrRip2 implies reception of multicast - packets." - DEFVAL { rip1OrRip2 } - ::= { rip2IfConfEntry 6 } - - rip2IfConfDefaultMetric OBJECT-TYPE - SYNTAX INTEGER ( 0..15 ) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "This variable indicates the metric that is to - be used for the default route entry in RIP updates - originated on this interface. A value of zero - indicates that no default route should be - originated; in this case, a default route via - another router may be propagated." - ::= { rip2IfConfEntry 7 } - - rip2IfConfStatus OBJECT-TYPE - SYNTAX RowStatus - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "Writing invalid has the effect of deleting - this interface." - ::= { rip2IfConfEntry 8 } - - rip2IfConfSrcAddress OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The IP Address this system will use as a source - address on this interface. If it is a numbered - interface, this MUST be the same value as - rip2IfConfAddress. On unnumbered interfaces, - it must be the value of rip2IfConfAddress for - some interface on the system." - ::= { rip2IfConfEntry 9 } - ---4.3 Peer Table - --- Peer Table - --- The RIP Peer Group --- Implementation of this Group is Optional - --- This group provides information about active peer --- relationships intended to assist in debugging. An --- active peer is a router from which a valid RIP --- updated has been heard in the last 180 seconds. - - rip2PeerTable OBJECT-TYPE - SYNTAX SEQUENCE OF Rip2PeerEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A list of RIP Peers." - ::= { rip2 4 } - - rip2PeerEntry OBJECT-TYPE - SYNTAX Rip2PeerEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Information regarding a single routing peer." - INDEX { rip2PeerAddress, rip2PeerDomain } - ::= { rip2PeerTable 1 } - - Rip2PeerEntry ::= - SEQUENCE { - rip2PeerAddress - IpAddress, - rip2PeerDomain - RouteTag, - rip2PeerLastUpdate - TimeTicks, - rip2PeerVersion - INTEGER, - rip2PeerRcvBadPackets - Counter32, - rip2PeerRcvBadRoutes - Counter32 - } - - rip2PeerAddress OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The IP Address that the peer is using as its source - address. Note that on an unnumbered link, this may - not be a member of any subnet on the system." - ::= { rip2PeerEntry 1 } - - rip2PeerDomain OBJECT-TYPE - SYNTAX RouteTag - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The value in the Routing Domain field in RIP - packets received from the peer. As domain suuport - is deprecated, this must be zero." - ::= { rip2PeerEntry 2 } - - rip2PeerLastUpdate OBJECT-TYPE - SYNTAX TimeTicks - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The value of sysUpTime when the most recent - RIP update was received from this system." - ::= { rip2PeerEntry 3 } - - rip2PeerVersion OBJECT-TYPE - SYNTAX INTEGER ( 0..255 ) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The RIP version number in the header of the - last RIP packet received." - ::= { rip2PeerEntry 4 } - - rip2PeerRcvBadPackets OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of RIP response packets from this - peer discarded as invalid." - ::= { rip2PeerEntry 5 } - - - rip2PeerRcvBadRoutes OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of routes from this peer that were - ignored because the entry format was invalid." - ::= { rip2PeerEntry 6 } - --- conformance information - -rip2Conformance OBJECT IDENTIFIER ::= { rip2 5 } - -rip2Groups OBJECT IDENTIFIER ::= { rip2Conformance 1 } -rip2Compliances OBJECT IDENTIFIER ::= { rip2Conformance 2 } - --- compliance statements -rip2Compliance MODULE-COMPLIANCE - STATUS current - DESCRIPTION - "The compliance statement " - MODULE -- this module - MANDATORY-GROUPS { - rip2GlobalGroup, - rip2IfStatGroup, - rip2IfConfGroup, - rip2PeerGroup - } - GROUP rip2GlobalGroup - DESCRIPTION - "This group defines global controls for RIP-II systems." - GROUP rip2IfStatGroup - DESCRIPTION - "This group defines interface statistics for RIP-II systems." - GROUP rip2IfConfGroup - DESCRIPTION - "This group defines interface configuration for RIP-II systems." - GROUP rip2PeerGroup - DESCRIPTION - "This group defines peer information for RIP-II systems." - ::= { rip2Compliances 1 } - --- units of conformance - -rip2GlobalGroup OBJECT-GROUP - OBJECTS { - rip2GlobalRouteChanges, - rip2GlobalQueries - } - STATUS current - DESCRIPTION - "This group defines global controls for RIP-II systems." - ::= { rip2Groups 1 } -rip2IfStatGroup OBJECT-GROUP - OBJECTS { - rip2IfStatAddress, - rip2IfStatRcvBadPackets, - rip2IfStatRcvBadRoutes, - rip2IfStatSentUpdates, - rip2IfStatStatus - } - STATUS current - DESCRIPTION - "This group defines interface statistics for RIP-II systems." - ::= { rip2Groups 2 } -rip2IfConfGroup OBJECT-GROUP - OBJECTS { - rip2IfConfAddress, - rip2IfConfAuthType, - rip2IfConfAuthKey, - rip2IfConfSend, - rip2IfConfReceive, - rip2IfConfDefaultMetric, - rip2IfConfStatus, - rip2IfConfSrcAddress - } - STATUS current - DESCRIPTION - "This group defines interface configuration for RIP-II systems." - ::= { rip2Groups 3 } -rip2PeerGroup OBJECT-GROUP - OBJECTS { - rip2PeerAddress, - rip2PeerDomain, - rip2PeerLastUpdate, - rip2PeerVersion, - rip2PeerRcvBadPackets, - rip2PeerRcvBadRoutes - } - STATUS current - DESCRIPTION - "This group defines peer information for RIP-II systems." - ::= { rip2Groups 4 } -END |