diff options
Diffstat (limited to 'data/mibs/SNMP-COMMUNITY-MIB.txt')
| -rw-r--r-- | data/mibs/SNMP-COMMUNITY-MIB.txt | 429 |
1 files changed, 429 insertions, 0 deletions
diff --git a/data/mibs/SNMP-COMMUNITY-MIB.txt b/data/mibs/SNMP-COMMUNITY-MIB.txt new file mode 100644 index 000000000..bc3d4d278 --- /dev/null +++ b/data/mibs/SNMP-COMMUNITY-MIB.txt @@ -0,0 +1,429 @@ +SNMP-COMMUNITY-MIB DEFINITIONS ::= BEGIN + +IMPORTS + IpAddress, + MODULE-IDENTITY, + OBJECT-TYPE, + Integer32, + snmpModules + FROM SNMPv2-SMI + RowStatus, + StorageType + FROM SNMPv2-TC + SnmpAdminString, + SnmpEngineID + FROM SNMP-FRAMEWORK-MIB + SnmpTagValue, + snmpTargetAddrEntry + FROM SNMP-TARGET-MIB + MODULE-COMPLIANCE, + OBJECT-GROUP + FROM SNMPv2-CONF; + +snmpCommunityMIB MODULE-IDENTITY + LAST-UPDATED "200003060000Z" -- 6 Mar 2000, midnight + ORGANIZATION "SNMPv3 Working Group" + CONTACT-INFO "WG-email: snmpv3@lists.tislabs.com + Subscribe: majordomo@lists.tislabs.com + In msg body: subscribe snmpv3 + + Chair: Russ Mundy + TIS Labs at Network Associates + Postal: 3060 Washington Rd + Glenwood MD 21738 + USA + Email: mundy@tislabs.com + Phone: +1-301-854-6889 + + Co-editor: Rob Frye + CoSine Communications + Postal: 1200 Bridge Parkway + Redwood City, CA 94065 + USA + E-mail: rfrye@cosinecom.com + Phone: +1 703 725 1130 + + Co-editor: David B. Levi + Nortel Networks + Postal: 3505 Kesterwood Drive + Knoxville, TN 37918 + E-mail: dlevi@nortelnetworks.com + Phone: +1 423 686 0432 + + Co-editor: Shawn A. Routhier + Integrated Systems Inc. + Postal: 333 North Ave 4th Floor + Wakefield, MA 01880 + E-mail: sar@epilogue.com + Phone: +1 781 245 0804 + + Co-editor: Bert Wijnen + Lucent Technologies + Postal: Schagen 33 + 3461 GL Linschoten + Netherlands + Email: bwijnen@lucent.com + Phone: +31-348-407-775 + " + DESCRIPTION + "This MIB module defines objects to help support coexistence + between SNMPv1, SNMPv2c, and SNMPv3." + REVISION "200003060000Z" -- 6 Mar 2000 + DESCRIPTION "This version published as RFC 2576." + REVISION "199905130000Z" -- 13 May 1999 + DESCRIPTION "The Initial Revision" + ::= { snmpModules 18 } + +-- Administrative assignments **************************************** + +snmpCommunityMIBObjects OBJECT IDENTIFIER ::= { snmpCommunityMIB 1 } +snmpCommunityMIBConformance OBJECT IDENTIFIER ::= { snmpCommunityMIB 2 } + +-- +-- The snmpCommunityTable contains a database of community strings. +-- This table provides mappings between community strings, and the + +-- parameters required for View-based Access Control. +-- + +snmpCommunityTable OBJECT-TYPE + SYNTAX SEQUENCE OF SnmpCommunityEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table of community strings configured in the SNMP + engine's Local Configuration Datastore (LCD)." + ::= { snmpCommunityMIBObjects 1 } + +snmpCommunityEntry OBJECT-TYPE + SYNTAX SnmpCommunityEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a particular community string." + INDEX { IMPLIED snmpCommunityIndex } + ::= { snmpCommunityTable 1 } + +SnmpCommunityEntry ::= SEQUENCE { + snmpCommunityIndex SnmpAdminString, + snmpCommunityName OCTET STRING, + snmpCommunitySecurityName SnmpAdminString, + snmpCommunityContextEngineID SnmpEngineID, + snmpCommunityContextName SnmpAdminString, + snmpCommunityTransportTag SnmpTagValue, + snmpCommunityStorageType StorageType, + snmpCommunityStatus RowStatus +} + +snmpCommunityIndex OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE(1..32)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The unique index value of a row in this table." + ::= { snmpCommunityEntry 1 } + +snmpCommunityName OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The community string for which a row in this table + represents a configuration." + ::= { snmpCommunityEntry 2 } + +snmpCommunitySecurityName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE(1..32)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A human readable string representing the corresponding + value of snmpCommunityName in a Security Model + independent format." + ::= { snmpCommunityEntry 3 } + +snmpCommunityContextEngineID OBJECT-TYPE + SYNTAX SnmpEngineID + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The contextEngineID indicating the location of the + context in which management information is accessed + when using the community string specified by the + corresponding instance of snmpCommunityName. + + The default value is the snmpEngineID of the entity in + which this object is instantiated." + ::= { snmpCommunityEntry 4 } + +snmpCommunityContextName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE(0..32)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The context in which management information is accessed + when using the community string specified by the corresponding + instance of snmpCommunityName." + DEFVAL { ''H } -- the empty string + ::= { snmpCommunityEntry 5 } + +snmpCommunityTransportTag OBJECT-TYPE + SYNTAX SnmpTagValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object specifies a set of transport endpoints + from which a command responder application will accept + management requests. If a management request containing + this community is received on a transport endpoint other + than the transport endpoints identified by this object, + the request is deemed unauthentic. + + The transports identified by this object are specified + + in the snmpTargetAddrTable. Entries in that table + whose snmpTargetAddrTagList contains this tag value + are identified. + + If the value of this object has zero-length, transport + endpoints are not checked when authenticating messages + containing this community string." + DEFVAL { ''H } -- the empty string + ::= { snmpCommunityEntry 6 } + +snmpCommunityStorageType OBJECT-TYPE + SYNTAX StorageType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The storage type for this conceptual row in the + snmpCommunityTable. Conceptual rows having the value + 'permanent' need not allow write-access to any + columnar object in the row." + ::= { snmpCommunityEntry 7 } + +snmpCommunityStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status of this conceptual row in the snmpCommunityTable. + + An entry in this table is not qualified for activation + until instances of all corresponding columns have been + initialized, either through default values, or through + Set operations. The snmpCommunityName and + snmpCommunitySecurityName objects must be explicitly set. + + There is no restriction on setting columns in this table + when the value of snmpCommunityStatus is active(1)." + ::= { snmpCommunityEntry 8 } + +-- +-- The snmpTargetAddrExtTable +-- + +snmpTargetAddrExtTable OBJECT-TYPE + SYNTAX SEQUENCE OF SnmpTargetAddrExtEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table of mask and mms values associated with the + + snmpTargetAddrTable. + + The snmpTargetAddrExtTable augments the + snmpTargetAddrTable with a transport address mask value + and a maximum message size value. The transport address + mask allows entries in the snmpTargetAddrTable to define + a set of addresses instead of just a single address. + The maximum message size value allows the maximum + message size of another SNMP entity to be configured for + use in SNMPv1 (and SNMPv2c) transactions, where the + message format does not specify a maximum message size." + ::= { snmpCommunityMIBObjects 2 } + +snmpTargetAddrExtEntry OBJECT-TYPE + SYNTAX SnmpTargetAddrExtEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a particular mask and mms value." + AUGMENTS { snmpTargetAddrEntry } + ::= { snmpTargetAddrExtTable 1 } + +SnmpTargetAddrExtEntry ::= SEQUENCE { + snmpTargetAddrTMask OCTET STRING, + snmpTargetAddrMMS Integer32 +} + +snmpTargetAddrTMask OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..255)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The mask value associated with an entry in the + snmpTargetAddrTable. The value of this object must + have the same length as the corresponding instance of + snmpTargetAddrTAddress, or must have length 0. An + attempt to set it to any other value will result in + an inconsistentValue error. + + The value of this object allows an entry in the + snmpTargetAddrTable to specify multiple addresses. + The mask value is used to select which bits of + a transport address must match bits of the corresponding + instance of snmpTargetAddrTAddress, in order for the + transport address to match a particular entry in the + snmpTargetAddrTable. Bits which are 1 in the mask + value indicate bits in the transport address which + must match bits in the snmpTargetAddrTAddress value. + + Bits which are 0 in the mask indicate bits in the + transport address which need not match. If the + length of the mask is 0, the mask should be treated + as if all its bits were 1 and its length were equal + to the length of the corresponding value of + snmpTargetAddrTable. + + This object may not be modified while the value of the + corresponding instance of snmpTargetAddrRowStatus is + active(1). An attempt to set this object in this case + will result in an inconsistentValue error." + DEFVAL { ''H } + ::= { snmpTargetAddrExtEntry 1 } + +snmpTargetAddrMMS OBJECT-TYPE + SYNTAX Integer32 (0|484..2147483647) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The maximum message size value associated with an entry + in the snmpTargetAddrTable." + DEFVAL { 484 } + ::= { snmpTargetAddrExtEntry 2 } + +-- +-- The snmpTrapAddress and snmpTrapCommunity objects are included +-- in notifications that are forwarded by a proxy, which were +-- originally received as SNMPv1 Trap messages. +-- + +snmpTrapAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The value of the agent-addr field of a Trap PDU which + is forwarded by a proxy forwarder application using + an SNMP version other than SNMPv1. The value of this + object SHOULD contain the value of the agent-addr field + from the original Trap PDU as generated by an SNMPv1 + agent." + ::= { snmpCommunityMIBObjects 3 } + +snmpTrapCommunity OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "The value of the community string field of an SNMPv1 + message containing a Trap PDU which is forwarded by a + a proxy forwarder application using an SNMP version + other than SNMPv1. The value of this object SHOULD + contain the value of the community string field from + the original SNMPv1 message containing a Trap PDU as + generated by an SNMPv1 agent." + ::= { snmpCommunityMIBObjects 4 } + +-- Conformance Information ******************************************* + +snmpCommunityMIBCompliances OBJECT IDENTIFIER + ::= { snmpCommunityMIBConformance 1 } +snmpCommunityMIBGroups OBJECT IDENTIFIER + ::= { snmpCommunityMIBConformance 2 } + +-- Compliance statements + +snmpCommunityMIBCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for SNMP engines which + implement the SNMP-COMMUNITY-MIB." + + MODULE -- this module + MANDATORY-GROUPS { snmpCommunityGroup } + + OBJECT snmpCommunityName + MIN-ACCESS read-only + DESCRIPTION "Write access is not required." + + OBJECT snmpCommunitySecurityName + MIN-ACCESS read-only + DESCRIPTION "Write access is not required." + + OBJECT snmpCommunityContextEngineID + MIN-ACCESS read-only + DESCRIPTION "Write access is not required." + + OBJECT snmpCommunityContextName + MIN-ACCESS read-only + DESCRIPTION "Write access is not required." + + OBJECT snmpCommunityTransportTag + MIN-ACCESS read-only + DESCRIPTION "Write access is not required." + + OBJECT snmpCommunityStorageType + MIN-ACCESS read-only + DESCRIPTION "Write access is not required." + + OBJECT snmpCommunityStatus + MIN-ACCESS read-only + DESCRIPTION "Write access is not required." + ::= { snmpCommunityMIBCompliances 1 } + +snmpProxyTrapForwardCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for SNMP engines which + contain a proxy forwarding application which is + capable of forwarding SNMPv1 traps using SNMPv2c + or SNMPv3." + MODULE -- this module + MANDATORY-GROUPS { snmpProxyTrapForwardGroup } + ::= { snmpCommunityMIBCompliances 2 } + +snmpCommunityGroup OBJECT-GROUP + OBJECTS { + snmpCommunityName, + snmpCommunitySecurityName, + snmpCommunityContextEngineID, + snmpCommunityContextName, + snmpCommunityTransportTag, + snmpCommunityStorageType, + snmpCommunityStatus, + snmpTargetAddrTMask, + snmpTargetAddrMMS + } + STATUS current + DESCRIPTION + "A collection of objects providing for configuration + of community strings for SNMPv1 (and SNMPv2c) usage." + ::= { snmpCommunityMIBGroups 1 } + +snmpProxyTrapForwardGroup OBJECT-GROUP + OBJECTS { + snmpTrapAddress, + snmpTrapCommunity + } + STATUS current + DESCRIPTION + "Objects which are used by proxy forwarding applications + when translating traps between SNMP versions. These are + used to preserve SNMPv1-specific information when + + translating to SNMPv2c or SNMPv3." + ::= { snmpCommunityMIBGroups 3 } + +END |