diff options
Diffstat (limited to 'data/mibs/SNMP-COMMUNITY-MIB.txt')
| -rw-r--r-- | data/mibs/SNMP-COMMUNITY-MIB.txt | 429 |
1 files changed, 0 insertions, 429 deletions
diff --git a/data/mibs/SNMP-COMMUNITY-MIB.txt b/data/mibs/SNMP-COMMUNITY-MIB.txt deleted file mode 100644 index bc3d4d278..000000000 --- a/data/mibs/SNMP-COMMUNITY-MIB.txt +++ /dev/null @@ -1,429 +0,0 @@ -SNMP-COMMUNITY-MIB DEFINITIONS ::= BEGIN - -IMPORTS - IpAddress, - MODULE-IDENTITY, - OBJECT-TYPE, - Integer32, - snmpModules - FROM SNMPv2-SMI - RowStatus, - StorageType - FROM SNMPv2-TC - SnmpAdminString, - SnmpEngineID - FROM SNMP-FRAMEWORK-MIB - SnmpTagValue, - snmpTargetAddrEntry - FROM SNMP-TARGET-MIB - MODULE-COMPLIANCE, - OBJECT-GROUP - FROM SNMPv2-CONF; - -snmpCommunityMIB MODULE-IDENTITY - LAST-UPDATED "200003060000Z" -- 6 Mar 2000, midnight - ORGANIZATION "SNMPv3 Working Group" - CONTACT-INFO "WG-email: snmpv3@lists.tislabs.com - Subscribe: majordomo@lists.tislabs.com - In msg body: subscribe snmpv3 - - Chair: Russ Mundy - TIS Labs at Network Associates - Postal: 3060 Washington Rd - Glenwood MD 21738 - USA - Email: mundy@tislabs.com - Phone: +1-301-854-6889 - - Co-editor: Rob Frye - CoSine Communications - Postal: 1200 Bridge Parkway - Redwood City, CA 94065 - USA - E-mail: rfrye@cosinecom.com - Phone: +1 703 725 1130 - - Co-editor: David B. Levi - Nortel Networks - Postal: 3505 Kesterwood Drive - Knoxville, TN 37918 - E-mail: dlevi@nortelnetworks.com - Phone: +1 423 686 0432 - - Co-editor: Shawn A. Routhier - Integrated Systems Inc. - Postal: 333 North Ave 4th Floor - Wakefield, MA 01880 - E-mail: sar@epilogue.com - Phone: +1 781 245 0804 - - Co-editor: Bert Wijnen - Lucent Technologies - Postal: Schagen 33 - 3461 GL Linschoten - Netherlands - Email: bwijnen@lucent.com - Phone: +31-348-407-775 - " - DESCRIPTION - "This MIB module defines objects to help support coexistence - between SNMPv1, SNMPv2c, and SNMPv3." - REVISION "200003060000Z" -- 6 Mar 2000 - DESCRIPTION "This version published as RFC 2576." - REVISION "199905130000Z" -- 13 May 1999 - DESCRIPTION "The Initial Revision" - ::= { snmpModules 18 } - --- Administrative assignments **************************************** - -snmpCommunityMIBObjects OBJECT IDENTIFIER ::= { snmpCommunityMIB 1 } -snmpCommunityMIBConformance OBJECT IDENTIFIER ::= { snmpCommunityMIB 2 } - --- --- The snmpCommunityTable contains a database of community strings. --- This table provides mappings between community strings, and the - --- parameters required for View-based Access Control. --- - -snmpCommunityTable OBJECT-TYPE - SYNTAX SEQUENCE OF SnmpCommunityEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The table of community strings configured in the SNMP - engine's Local Configuration Datastore (LCD)." - ::= { snmpCommunityMIBObjects 1 } - -snmpCommunityEntry OBJECT-TYPE - SYNTAX SnmpCommunityEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Information about a particular community string." - INDEX { IMPLIED snmpCommunityIndex } - ::= { snmpCommunityTable 1 } - -SnmpCommunityEntry ::= SEQUENCE { - snmpCommunityIndex SnmpAdminString, - snmpCommunityName OCTET STRING, - snmpCommunitySecurityName SnmpAdminString, - snmpCommunityContextEngineID SnmpEngineID, - snmpCommunityContextName SnmpAdminString, - snmpCommunityTransportTag SnmpTagValue, - snmpCommunityStorageType StorageType, - snmpCommunityStatus RowStatus -} - -snmpCommunityIndex OBJECT-TYPE - SYNTAX SnmpAdminString (SIZE(1..32)) - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The unique index value of a row in this table." - ::= { snmpCommunityEntry 1 } - -snmpCommunityName OBJECT-TYPE - SYNTAX OCTET STRING - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The community string for which a row in this table - represents a configuration." - ::= { snmpCommunityEntry 2 } - -snmpCommunitySecurityName OBJECT-TYPE - SYNTAX SnmpAdminString (SIZE(1..32)) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "A human readable string representing the corresponding - value of snmpCommunityName in a Security Model - independent format." - ::= { snmpCommunityEntry 3 } - -snmpCommunityContextEngineID OBJECT-TYPE - SYNTAX SnmpEngineID - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The contextEngineID indicating the location of the - context in which management information is accessed - when using the community string specified by the - corresponding instance of snmpCommunityName. - - The default value is the snmpEngineID of the entity in - which this object is instantiated." - ::= { snmpCommunityEntry 4 } - -snmpCommunityContextName OBJECT-TYPE - SYNTAX SnmpAdminString (SIZE(0..32)) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The context in which management information is accessed - when using the community string specified by the corresponding - instance of snmpCommunityName." - DEFVAL { ''H } -- the empty string - ::= { snmpCommunityEntry 5 } - -snmpCommunityTransportTag OBJECT-TYPE - SYNTAX SnmpTagValue - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "This object specifies a set of transport endpoints - from which a command responder application will accept - management requests. If a management request containing - this community is received on a transport endpoint other - than the transport endpoints identified by this object, - the request is deemed unauthentic. - - The transports identified by this object are specified - - in the snmpTargetAddrTable. Entries in that table - whose snmpTargetAddrTagList contains this tag value - are identified. - - If the value of this object has zero-length, transport - endpoints are not checked when authenticating messages - containing this community string." - DEFVAL { ''H } -- the empty string - ::= { snmpCommunityEntry 6 } - -snmpCommunityStorageType OBJECT-TYPE - SYNTAX StorageType - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The storage type for this conceptual row in the - snmpCommunityTable. Conceptual rows having the value - 'permanent' need not allow write-access to any - columnar object in the row." - ::= { snmpCommunityEntry 7 } - -snmpCommunityStatus OBJECT-TYPE - SYNTAX RowStatus - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The status of this conceptual row in the snmpCommunityTable. - - An entry in this table is not qualified for activation - until instances of all corresponding columns have been - initialized, either through default values, or through - Set operations. The snmpCommunityName and - snmpCommunitySecurityName objects must be explicitly set. - - There is no restriction on setting columns in this table - when the value of snmpCommunityStatus is active(1)." - ::= { snmpCommunityEntry 8 } - --- --- The snmpTargetAddrExtTable --- - -snmpTargetAddrExtTable OBJECT-TYPE - SYNTAX SEQUENCE OF SnmpTargetAddrExtEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The table of mask and mms values associated with the - - snmpTargetAddrTable. - - The snmpTargetAddrExtTable augments the - snmpTargetAddrTable with a transport address mask value - and a maximum message size value. The transport address - mask allows entries in the snmpTargetAddrTable to define - a set of addresses instead of just a single address. - The maximum message size value allows the maximum - message size of another SNMP entity to be configured for - use in SNMPv1 (and SNMPv2c) transactions, where the - message format does not specify a maximum message size." - ::= { snmpCommunityMIBObjects 2 } - -snmpTargetAddrExtEntry OBJECT-TYPE - SYNTAX SnmpTargetAddrExtEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Information about a particular mask and mms value." - AUGMENTS { snmpTargetAddrEntry } - ::= { snmpTargetAddrExtTable 1 } - -SnmpTargetAddrExtEntry ::= SEQUENCE { - snmpTargetAddrTMask OCTET STRING, - snmpTargetAddrMMS Integer32 -} - -snmpTargetAddrTMask OBJECT-TYPE - SYNTAX OCTET STRING (SIZE (0..255)) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The mask value associated with an entry in the - snmpTargetAddrTable. The value of this object must - have the same length as the corresponding instance of - snmpTargetAddrTAddress, or must have length 0. An - attempt to set it to any other value will result in - an inconsistentValue error. - - The value of this object allows an entry in the - snmpTargetAddrTable to specify multiple addresses. - The mask value is used to select which bits of - a transport address must match bits of the corresponding - instance of snmpTargetAddrTAddress, in order for the - transport address to match a particular entry in the - snmpTargetAddrTable. Bits which are 1 in the mask - value indicate bits in the transport address which - must match bits in the snmpTargetAddrTAddress value. - - Bits which are 0 in the mask indicate bits in the - transport address which need not match. If the - length of the mask is 0, the mask should be treated - as if all its bits were 1 and its length were equal - to the length of the corresponding value of - snmpTargetAddrTable. - - This object may not be modified while the value of the - corresponding instance of snmpTargetAddrRowStatus is - active(1). An attempt to set this object in this case - will result in an inconsistentValue error." - DEFVAL { ''H } - ::= { snmpTargetAddrExtEntry 1 } - -snmpTargetAddrMMS OBJECT-TYPE - SYNTAX Integer32 (0|484..2147483647) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The maximum message size value associated with an entry - in the snmpTargetAddrTable." - DEFVAL { 484 } - ::= { snmpTargetAddrExtEntry 2 } - --- --- The snmpTrapAddress and snmpTrapCommunity objects are included --- in notifications that are forwarded by a proxy, which were --- originally received as SNMPv1 Trap messages. --- - -snmpTrapAddress OBJECT-TYPE - SYNTAX IpAddress - MAX-ACCESS accessible-for-notify - STATUS current - DESCRIPTION - "The value of the agent-addr field of a Trap PDU which - is forwarded by a proxy forwarder application using - an SNMP version other than SNMPv1. The value of this - object SHOULD contain the value of the agent-addr field - from the original Trap PDU as generated by an SNMPv1 - agent." - ::= { snmpCommunityMIBObjects 3 } - -snmpTrapCommunity OBJECT-TYPE - SYNTAX OCTET STRING - MAX-ACCESS accessible-for-notify - STATUS current - DESCRIPTION - "The value of the community string field of an SNMPv1 - message containing a Trap PDU which is forwarded by a - a proxy forwarder application using an SNMP version - other than SNMPv1. The value of this object SHOULD - contain the value of the community string field from - the original SNMPv1 message containing a Trap PDU as - generated by an SNMPv1 agent." - ::= { snmpCommunityMIBObjects 4 } - --- Conformance Information ******************************************* - -snmpCommunityMIBCompliances OBJECT IDENTIFIER - ::= { snmpCommunityMIBConformance 1 } -snmpCommunityMIBGroups OBJECT IDENTIFIER - ::= { snmpCommunityMIBConformance 2 } - --- Compliance statements - -snmpCommunityMIBCompliance MODULE-COMPLIANCE - STATUS current - DESCRIPTION - "The compliance statement for SNMP engines which - implement the SNMP-COMMUNITY-MIB." - - MODULE -- this module - MANDATORY-GROUPS { snmpCommunityGroup } - - OBJECT snmpCommunityName - MIN-ACCESS read-only - DESCRIPTION "Write access is not required." - - OBJECT snmpCommunitySecurityName - MIN-ACCESS read-only - DESCRIPTION "Write access is not required." - - OBJECT snmpCommunityContextEngineID - MIN-ACCESS read-only - DESCRIPTION "Write access is not required." - - OBJECT snmpCommunityContextName - MIN-ACCESS read-only - DESCRIPTION "Write access is not required." - - OBJECT snmpCommunityTransportTag - MIN-ACCESS read-only - DESCRIPTION "Write access is not required." - - OBJECT snmpCommunityStorageType - MIN-ACCESS read-only - DESCRIPTION "Write access is not required." - - OBJECT snmpCommunityStatus - MIN-ACCESS read-only - DESCRIPTION "Write access is not required." - ::= { snmpCommunityMIBCompliances 1 } - -snmpProxyTrapForwardCompliance MODULE-COMPLIANCE - STATUS current - DESCRIPTION - "The compliance statement for SNMP engines which - contain a proxy forwarding application which is - capable of forwarding SNMPv1 traps using SNMPv2c - or SNMPv3." - MODULE -- this module - MANDATORY-GROUPS { snmpProxyTrapForwardGroup } - ::= { snmpCommunityMIBCompliances 2 } - -snmpCommunityGroup OBJECT-GROUP - OBJECTS { - snmpCommunityName, - snmpCommunitySecurityName, - snmpCommunityContextEngineID, - snmpCommunityContextName, - snmpCommunityTransportTag, - snmpCommunityStorageType, - snmpCommunityStatus, - snmpTargetAddrTMask, - snmpTargetAddrMMS - } - STATUS current - DESCRIPTION - "A collection of objects providing for configuration - of community strings for SNMPv1 (and SNMPv2c) usage." - ::= { snmpCommunityMIBGroups 1 } - -snmpProxyTrapForwardGroup OBJECT-GROUP - OBJECTS { - snmpTrapAddress, - snmpTrapCommunity - } - STATUS current - DESCRIPTION - "Objects which are used by proxy forwarding applications - when translating traps between SNMP versions. These are - used to preserve SNMPv1-specific information when - - translating to SNMPv2c or SNMPv3." - ::= { snmpCommunityMIBGroups 3 } - -END |