diff options
Diffstat (limited to 'data/mibs/SNMP-TARGET-MIB.txt')
| -rw-r--r-- | data/mibs/SNMP-TARGET-MIB.txt | 660 |
1 files changed, 0 insertions, 660 deletions
diff --git a/data/mibs/SNMP-TARGET-MIB.txt b/data/mibs/SNMP-TARGET-MIB.txt deleted file mode 100644 index 654afdd69..000000000 --- a/data/mibs/SNMP-TARGET-MIB.txt +++ /dev/null @@ -1,660 +0,0 @@ -SNMP-TARGET-MIB DEFINITIONS ::= BEGIN - -IMPORTS - MODULE-IDENTITY, - OBJECT-TYPE, - snmpModules, - Counter32, - Integer32 - FROM SNMPv2-SMI - - TEXTUAL-CONVENTION, - TDomain, - TAddress, - TimeInterval, - RowStatus, - StorageType, - TestAndIncr - FROM SNMPv2-TC - - SnmpSecurityModel, - SnmpMessageProcessingModel, - SnmpSecurityLevel, - SnmpAdminString - FROM SNMP-FRAMEWORK-MIB - - MODULE-COMPLIANCE, - OBJECT-GROUP - FROM SNMPv2-CONF; - -snmpTargetMIB MODULE-IDENTITY - LAST-UPDATED "200210140000Z" - ORGANIZATION "IETF SNMPv3 Working Group" - CONTACT-INFO - "WG-email: snmpv3@lists.tislabs.com - Subscribe: majordomo@lists.tislabs.com - In message body: subscribe snmpv3 - - Co-Chair: Russ Mundy - Network Associates Laboratories - Postal: 15204 Omega Drive, Suite 300 - Rockville, MD 20850-4601 - USA - EMail: mundy@tislabs.com - Phone: +1 301-947-7107 - - Co-Chair: David Harrington - Enterasys Networks - Postal: 35 Industrial Way - P. O. Box 5004 - Rochester, New Hampshire 03866-5005 - USA - EMail: dbh@enterasys.com - Phone: +1 603-337-2614 - - Co-editor: David B. Levi - Nortel Networks - Postal: 3505 Kesterwood Drive - Knoxville, Tennessee 37918 - EMail: dlevi@nortelnetworks.com - Phone: +1 865 686 0432 - - Co-editor: Paul Meyer - Secure Computing Corporation - Postal: 2675 Long Lake Road - - Roseville, Minnesota 55113 - EMail: paul_meyer@securecomputing.com - Phone: +1 651 628 1592 - - Co-editor: Bob Stewart - Retired" - DESCRIPTION - "This MIB module defines MIB objects which provide - mechanisms to remotely configure the parameters used - by an SNMP entity for the generation of SNMP messages. - - Copyright (C) The Internet Society (2002). This - version of this MIB module is part of RFC 3413; - see the RFC itself for full legal notices. - " - REVISION "200210140000Z" -- 14 October 2002 - DESCRIPTION "Fixed DISPLAY-HINTS for UTF-8 strings, fixed hex - value of LF characters, clarified meaning of zero - length tag values, improved tag list examples. - Published as RFC 3413." - REVISION "199808040000Z" -- 4 August 1998 - DESCRIPTION "Clarifications, published as - RFC 2573." - REVISION "199707140000Z" -- 14 July 1997 - DESCRIPTION "The initial revision, published as RFC2273." - ::= { snmpModules 12 } - -snmpTargetObjects OBJECT IDENTIFIER ::= { snmpTargetMIB 1 } -snmpTargetConformance OBJECT IDENTIFIER ::= { snmpTargetMIB 3 } - -SnmpTagValue ::= TEXTUAL-CONVENTION - DISPLAY-HINT "255t" - STATUS current - DESCRIPTION - "An octet string containing a tag value. - Tag values are preferably in human-readable form. - - To facilitate internationalization, this information - is represented using the ISO/IEC IS 10646-1 character - set, encoded as an octet string using the UTF-8 - character encoding scheme described in RFC 2279. - - Since additional code points are added by amendments - to the 10646 standard from time to time, - implementations must be prepared to encounter any code - point from 0x00000000 to 0x7fffffff. - - The use of control codes should be avoided, and certain - - control codes are not allowed as described below. - - For code points not directly supported by user - interface hardware or software, an alternative means - of entry and display, such as hexadecimal, may be - provided. - - For information encoded in 7-bit US-ASCII, the UTF-8 - representation is identical to the US-ASCII encoding. - - Note that when this TC is used for an object that - is used or envisioned to be used as an index, then a - SIZE restriction must be specified so that the number - of sub-identifiers for any object instance does not - exceed the limit of 128, as defined by [RFC1905]. - - An object of this type contains a single tag value - which is used to select a set of entries in a table. - - A tag value is an arbitrary string of octets, but - may not contain a delimiter character. Delimiter - characters are defined to be one of the following: - - - An ASCII space character (0x20). - - - An ASCII TAB character (0x09). - - - An ASCII carriage return (CR) character (0x0D). - - - An ASCII line feed (LF) character (0x0A). - - Delimiter characters are used to separate tag values - in a tag list. An object of this type may only - contain a single tag value, and so delimiter - characters are not allowed in a value of this type. - - Note that a tag value of 0 length means that no tag is - defined. In other words, a tag value of 0 length would - never match anything in a tag list, and would never - select any table entries. - - Some examples of valid tag values are: - - - 'acme' - - - 'router' - - - 'host' - - The use of a tag value to select table entries is - application and MIB specific." - SYNTAX OCTET STRING (SIZE (0..255)) - -SnmpTagList ::= TEXTUAL-CONVENTION - DISPLAY-HINT "255t" - STATUS current - DESCRIPTION - "An octet string containing a list of tag values. - Tag values are preferably in human-readable form. - - To facilitate internationalization, this information - is represented using the ISO/IEC IS 10646-1 character - set, encoded as an octet string using the UTF-8 - character encoding scheme described in RFC 2279. - - Since additional code points are added by amendments - to the 10646 standard from time to time, - implementations must be prepared to encounter any code - point from 0x00000000 to 0x7fffffff. - - The use of control codes should be avoided, except as - described below. - - For code points not directly supported by user - interface hardware or software, an alternative means - of entry and display, such as hexadecimal, may be - provided. - - For information encoded in 7-bit US-ASCII, the UTF-8 - representation is identical to the US-ASCII encoding. - - An object of this type contains a list of tag values - which are used to select a set of entries in a table. - - A tag value is an arbitrary string of octets, but - may not contain a delimiter character. Delimiter - characters are defined to be one of the following: - - - An ASCII space character (0x20). - - - An ASCII TAB character (0x09). - - - An ASCII carriage return (CR) character (0x0D). - - - An ASCII line feed (LF) character (0x0A). - - Delimiter characters are used to separate tag values - - in a tag list. Only a single delimiter character may - occur between two tag values. A tag value may not - have a zero length. These constraints imply certain - restrictions on the contents of this object: - - - There cannot be a leading or trailing delimiter - character. - - - There cannot be multiple adjacent delimiter - characters. - - Some examples of valid tag lists are: - - - '' -- an empty list - - - 'acme' -- list of one tag - - - 'host router bridge' -- list of several tags - - Note that although a tag value may not have a length of - zero, an empty string is still valid. This indicates - an empty list (i.e. there are no tag values in the list). - - The use of the tag list to select table entries is - application and MIB specific. Typically, an application - will provide one or more tag values, and any entry - which contains some combination of these tag values - will be selected." - SYNTAX OCTET STRING (SIZE (0..255)) - --- --- --- The snmpTargetObjects group --- --- - -snmpTargetSpinLock OBJECT-TYPE - SYNTAX TestAndIncr - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "This object is used to facilitate modification of table - entries in the SNMP-TARGET-MIB module by multiple - managers. In particular, it is useful when modifying - the value of the snmpTargetAddrTagList object. - - The procedure for modifying the snmpTargetAddrTagList - object is as follows: - - 1. Retrieve the value of snmpTargetSpinLock and - of snmpTargetAddrTagList. - - 2. Generate a new value for snmpTargetAddrTagList. - - 3. Set the value of snmpTargetSpinLock to the - retrieved value, and the value of - snmpTargetAddrTagList to the new value. If - the set fails for the snmpTargetSpinLock - object, go back to step 1." - ::= { snmpTargetObjects 1 } - -snmpTargetAddrTable OBJECT-TYPE - SYNTAX SEQUENCE OF SnmpTargetAddrEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A table of transport addresses to be used in the generation - of SNMP messages." - ::= { snmpTargetObjects 2 } - -snmpTargetAddrEntry OBJECT-TYPE - SYNTAX SnmpTargetAddrEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A transport address to be used in the generation - of SNMP operations. - - Entries in the snmpTargetAddrTable are created and - deleted using the snmpTargetAddrRowStatus object." - INDEX { IMPLIED snmpTargetAddrName } - ::= { snmpTargetAddrTable 1 } - -SnmpTargetAddrEntry ::= SEQUENCE { - snmpTargetAddrName SnmpAdminString, - snmpTargetAddrTDomain TDomain, - snmpTargetAddrTAddress TAddress, - snmpTargetAddrTimeout TimeInterval, - snmpTargetAddrRetryCount Integer32, - snmpTargetAddrTagList SnmpTagList, - snmpTargetAddrParams SnmpAdminString, - snmpTargetAddrStorageType StorageType, - snmpTargetAddrRowStatus RowStatus -} - -snmpTargetAddrName OBJECT-TYPE - SYNTAX SnmpAdminString (SIZE(1..32)) - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The locally arbitrary, but unique identifier associated - with this snmpTargetAddrEntry." - ::= { snmpTargetAddrEntry 1 } - -snmpTargetAddrTDomain OBJECT-TYPE - SYNTAX TDomain - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "This object indicates the transport type of the address - contained in the snmpTargetAddrTAddress object." - ::= { snmpTargetAddrEntry 2 } - -snmpTargetAddrTAddress OBJECT-TYPE - SYNTAX TAddress - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "This object contains a transport address. The format of - this address depends on the value of the - snmpTargetAddrTDomain object." - ::= { snmpTargetAddrEntry 3 } - -snmpTargetAddrTimeout OBJECT-TYPE - SYNTAX TimeInterval - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "This object should reflect the expected maximum round - trip time for communicating with the transport address - defined by this row. When a message is sent to this - address, and a response (if one is expected) is not - received within this time period, an implementation - may assume that the response will not be delivered. - - Note that the time interval that an application waits - for a response may actually be derived from the value - of this object. The method for deriving the actual time - interval is implementation dependent. One such method - is to derive the expected round trip time based on a - particular retransmission algorithm and on the number - of timeouts which have occurred. The type of message may - also be considered when deriving expected round trip - times for retransmissions. For example, if a message is - being sent with a securityLevel that indicates both - - authentication and privacy, the derived value may be - increased to compensate for extra processing time spent - during authentication and encryption processing." - DEFVAL { 1500 } - ::= { snmpTargetAddrEntry 4 } - -snmpTargetAddrRetryCount OBJECT-TYPE - SYNTAX Integer32 (0..255) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "This object specifies a default number of retries to be - attempted when a response is not received for a generated - message. An application may provide its own retry count, - in which case the value of this object is ignored." - DEFVAL { 3 } - ::= { snmpTargetAddrEntry 5 } - -snmpTargetAddrTagList OBJECT-TYPE - SYNTAX SnmpTagList - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "This object contains a list of tag values which are - used to select target addresses for a particular - operation." - DEFVAL { "" } - ::= { snmpTargetAddrEntry 6 } - -snmpTargetAddrParams OBJECT-TYPE - SYNTAX SnmpAdminString (SIZE(1..32)) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The value of this object identifies an entry in the - snmpTargetParamsTable. The identified entry - contains SNMP parameters to be used when generating - messages to be sent to this transport address." - ::= { snmpTargetAddrEntry 7 } - -snmpTargetAddrStorageType OBJECT-TYPE - SYNTAX StorageType - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The storage type for this conceptual row. - Conceptual rows having the value 'permanent' need not - allow write-access to any columnar objects in the row." - DEFVAL { nonVolatile } - ::= { snmpTargetAddrEntry 8 } - -snmpTargetAddrRowStatus OBJECT-TYPE - SYNTAX RowStatus - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The status of this conceptual row. - - To create a row in this table, a manager must - set this object to either createAndGo(4) or - createAndWait(5). - - Until instances of all corresponding columns are - appropriately configured, the value of the - corresponding instance of the snmpTargetAddrRowStatus - column is 'notReady'. - - In particular, a newly created row cannot be made - active until the corresponding instances of - snmpTargetAddrTDomain, snmpTargetAddrTAddress, and - snmpTargetAddrParams have all been set. - - The following objects may not be modified while the - value of this object is active(1): - - snmpTargetAddrTDomain - - snmpTargetAddrTAddress - An attempt to set these objects while the value of - snmpTargetAddrRowStatus is active(1) will result in - an inconsistentValue error." - ::= { snmpTargetAddrEntry 9 } - -snmpTargetParamsTable OBJECT-TYPE - SYNTAX SEQUENCE OF SnmpTargetParamsEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A table of SNMP target information to be used - in the generation of SNMP messages." - ::= { snmpTargetObjects 3 } - -snmpTargetParamsEntry OBJECT-TYPE - SYNTAX SnmpTargetParamsEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A set of SNMP target information. - - Entries in the snmpTargetParamsTable are created and - deleted using the snmpTargetParamsRowStatus object." - INDEX { IMPLIED snmpTargetParamsName } - ::= { snmpTargetParamsTable 1 } - -SnmpTargetParamsEntry ::= SEQUENCE { - snmpTargetParamsName SnmpAdminString, - snmpTargetParamsMPModel SnmpMessageProcessingModel, - snmpTargetParamsSecurityModel SnmpSecurityModel, - snmpTargetParamsSecurityName SnmpAdminString, - snmpTargetParamsSecurityLevel SnmpSecurityLevel, - snmpTargetParamsStorageType StorageType, - snmpTargetParamsRowStatus RowStatus -} - -snmpTargetParamsName OBJECT-TYPE - SYNTAX SnmpAdminString (SIZE(1..32)) - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "The locally arbitrary, but unique identifier associated - with this snmpTargetParamsEntry." - ::= { snmpTargetParamsEntry 1 } - -snmpTargetParamsMPModel OBJECT-TYPE - SYNTAX SnmpMessageProcessingModel - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The Message Processing Model to be used when generating - SNMP messages using this entry." - ::= { snmpTargetParamsEntry 2 } - -snmpTargetParamsSecurityModel OBJECT-TYPE - SYNTAX SnmpSecurityModel (1..2147483647) - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The Security Model to be used when generating SNMP - messages using this entry. An implementation may - choose to return an inconsistentValue error if an - attempt is made to set this variable to a value - for a security model which the implementation does - not support." - ::= { snmpTargetParamsEntry 3 } - -snmpTargetParamsSecurityName OBJECT-TYPE - SYNTAX SnmpAdminString - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The securityName which identifies the Principal on - whose behalf SNMP messages will be generated using - this entry." - ::= { snmpTargetParamsEntry 4 } - -snmpTargetParamsSecurityLevel OBJECT-TYPE - SYNTAX SnmpSecurityLevel - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The Level of Security to be used when generating - SNMP messages using this entry." - ::= { snmpTargetParamsEntry 5 } - -snmpTargetParamsStorageType OBJECT-TYPE - SYNTAX StorageType - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The storage type for this conceptual row. - Conceptual rows having the value 'permanent' need not - allow write-access to any columnar objects in the row." - DEFVAL { nonVolatile } - ::= { snmpTargetParamsEntry 6 } - -snmpTargetParamsRowStatus OBJECT-TYPE - SYNTAX RowStatus - MAX-ACCESS read-create - STATUS current - DESCRIPTION - "The status of this conceptual row. - - To create a row in this table, a manager must - set this object to either createAndGo(4) or - createAndWait(5). - - Until instances of all corresponding columns are - appropriately configured, the value of the - corresponding instance of the snmpTargetParamsRowStatus - column is 'notReady'. - - In particular, a newly created row cannot be made - active until the corresponding - snmpTargetParamsMPModel, - snmpTargetParamsSecurityModel, - snmpTargetParamsSecurityName, - and snmpTargetParamsSecurityLevel have all been set. - - The following objects may not be modified while the - value of this object is active(1): - - snmpTargetParamsMPModel - - snmpTargetParamsSecurityModel - - snmpTargetParamsSecurityName - - snmpTargetParamsSecurityLevel - An attempt to set these objects while the value of - snmpTargetParamsRowStatus is active(1) will result in - an inconsistentValue error." - ::= { snmpTargetParamsEntry 7 } - -snmpUnavailableContexts OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The total number of packets received by the SNMP - engine which were dropped because the context - contained in the message was unavailable." - ::= { snmpTargetObjects 4 } - -snmpUnknownContexts OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The total number of packets received by the SNMP - engine which were dropped because the context - contained in the message was unknown." - ::= { snmpTargetObjects 5 } - --- --- --- Conformance information --- --- - -snmpTargetCompliances OBJECT IDENTIFIER ::= - { snmpTargetConformance 1 } -snmpTargetGroups OBJECT IDENTIFIER ::= - { snmpTargetConformance 2 } - --- --- --- Compliance statements - --- --- - -snmpTargetCommandResponderCompliance MODULE-COMPLIANCE - STATUS current - DESCRIPTION - "The compliance statement for SNMP entities which include - a command responder application." - MODULE -- This Module - MANDATORY-GROUPS { snmpTargetCommandResponderGroup } - ::= { snmpTargetCompliances 1 } - -snmpTargetBasicGroup OBJECT-GROUP - OBJECTS { - snmpTargetSpinLock, - snmpTargetAddrTDomain, - snmpTargetAddrTAddress, - snmpTargetAddrTagList, - snmpTargetAddrParams, - snmpTargetAddrStorageType, - snmpTargetAddrRowStatus, - snmpTargetParamsMPModel, - snmpTargetParamsSecurityModel, - snmpTargetParamsSecurityName, - snmpTargetParamsSecurityLevel, - snmpTargetParamsStorageType, - snmpTargetParamsRowStatus - } - STATUS current - DESCRIPTION - "A collection of objects providing basic remote - configuration of management targets." - ::= { snmpTargetGroups 1 } - -snmpTargetResponseGroup OBJECT-GROUP - OBJECTS { - snmpTargetAddrTimeout, - snmpTargetAddrRetryCount - } - STATUS current - DESCRIPTION - "A collection of objects providing remote configuration - of management targets for applications which generate - SNMP messages for which a response message would be - expected." - ::= { snmpTargetGroups 2 } - -snmpTargetCommandResponderGroup OBJECT-GROUP - - OBJECTS { - snmpUnavailableContexts, - snmpUnknownContexts - } - STATUS current - DESCRIPTION - "A collection of objects required for command responder - applications, used for counting error conditions." - ::= { snmpTargetGroups 3 } - -END |