diff options
Diffstat (limited to 'data/mibs/SOURCE-ROUTING-MIB.txt')
| -rw-r--r-- | data/mibs/SOURCE-ROUTING-MIB.txt | 452 |
1 files changed, 452 insertions, 0 deletions
diff --git a/data/mibs/SOURCE-ROUTING-MIB.txt b/data/mibs/SOURCE-ROUTING-MIB.txt new file mode 100644 index 000000000..988b1b0e8 --- /dev/null +++ b/data/mibs/SOURCE-ROUTING-MIB.txt @@ -0,0 +1,452 @@ +SOURCE-ROUTING-MIB DEFINITIONS ::= BEGIN + +IMPORTS + Counter, Gauge + FROM RFC1155-SMI + dot1dBridge, dot1dSr + FROM BRIDGE-MIB + OBJECT-TYPE + FROM RFC-1212; + +-- groups in the SR MIB + +-- dot1dSr is imported from the Bridge MIB + +dot1dPortPair OBJECT IDENTIFIER ::= { dot1dBridge 10 } + +-- the dot1dSr group + +-- this group is implemented by those bridges that +-- support the source route bridging mode, including Source +-- Routing and SRT bridges. + +dot1dSrPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot1dSrPortEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A table that contains information about every + port that is associated with this source route + bridge." + ::= { dot1dSr 1 } + +dot1dSrPortEntry OBJECT-TYPE + SYNTAX Dot1dSrPortEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list of information for each port of a source + route bridge." + INDEX { dot1dSrPort } + + ::= { dot1dSrPortTable 1 } + +Dot1dSrPortEntry ::= + SEQUENCE { + dot1dSrPort + INTEGER, + dot1dSrPortHopCount + INTEGER, + dot1dSrPortLocalSegment + INTEGER, + dot1dSrPortBridgeNum + INTEGER, + dot1dSrPortTargetSegment + INTEGER, + dot1dSrPortLargestFrame + INTEGER, + dot1dSrPortSTESpanMode + INTEGER, + dot1dSrPortSpecInFrames + Counter, + dot1dSrPortSpecOutFrames + Counter, + dot1dSrPortApeInFrames + Counter, + dot1dSrPortApeOutFrames + Counter, + dot1dSrPortSteInFrames + Counter, + dot1dSrPortSteOutFrames + Counter, + dot1dSrPortSegmentMismatchDiscards + Counter, + dot1dSrPortDuplicateSegmentDiscards + Counter, + dot1dSrPortHopCountExceededDiscards + Counter, + dot1dSrPortDupLanIdOrTreeErrors + Counter, + dot1dSrPortLanIdMismatches + Counter + } + +dot1dSrPort OBJECT-TYPE + SYNTAX INTEGER (1..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The port number of the port for which this entry + + contains Source Route management information." + ::= { dot1dSrPortEntry 1 } + +dot1dSrPortHopCount OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The maximum number of routing descriptors allowed + in an All Paths or Spanning Tree Explorer frames." + ::= { dot1dSrPortEntry 2 } + +dot1dSrPortLocalSegment OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The segment number that uniquely identifies the + segment to which this port is connected. Current + source routing protocols limit this value to the + range: 0 through 4095. (The value 0 is used by + some management applications for special test + cases.) A value of 65535 signifies that no segment + number is assigned to this port." + ::= { dot1dSrPortEntry 3 } + +dot1dSrPortBridgeNum OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "A bridge number uniquely identifies a bridge when + more than one bridge is used to span the same two + segments. Current source routing protocols limit + this value to the range: 0 through 15. A value of + 65535 signifies that no bridge number is assigned + to this bridge." + ::= { dot1dSrPortEntry 4 } + +dot1dSrPortTargetSegment OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The segment number that corresponds to the target + segment this port is considered to be connected to + by the bridge. Current source routing protocols + limit this value to the range: 0 through 4095. + + (The value 0 is used by some management + applications for special test cases.) A value of + 65535 signifies that no target segment is assigned + to this port." + ::= { dot1dSrPortEntry 5 } + +-- It would be nice if we could use ifMtu as the size of the +-- largest frame, but we can't because ifMtu is defined to be +-- the size that the (inter-)network layer can use which can +-- differ from the MAC layer (especially if several layers of +-- encapsulation are used). + +dot1dSrPortLargestFrame OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The maximum size of the INFO field (LLC and + above) that this port can send/receive. It does + not include any MAC level (framing) octets. The + value of this object is used by this bridge to + determine whether a modification of the + LargestFrame (LF, see [14]) field of the Routing + Control field of the Routing Information Field is + necessary. + + 64 valid values are defined by the IEEE 802.5M SRT + Addendum: 516, 635, 754, 873, 993, 1112, 1231, + 1350, 1470, 1542, 1615, 1688, 1761, 1833, 1906, + 1979, 2052, 2345, 2638, 2932, 3225, 3518, 3812, + 4105, 4399, 4865, 5331, 5798, 6264, 6730, 7197, + 7663, 8130, 8539, 8949, 9358, 9768, 10178, 10587, + 10997, 11407, 12199, 12992, 13785, 14578, 15370, + 16163, 16956, 17749, 20730, 23711, 26693, 29674, + 32655, 35637, 38618, 41600, 44591, 47583, 50575, + 53567, 56559, 59551, and 65535. + + An illegal value will not be accepted by the + bridge." + ::= { dot1dSrPortEntry 6 } + +dot1dSrPortSTESpanMode OBJECT-TYPE + SYNTAX INTEGER { + auto-span(1), + disabled(2), + forced(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Determines how this port behaves when presented + with a Spanning Tree Explorer frame. The value + 'disabled(2)' indicates that the port will not + accept or send Spanning Tree Explorer packets; any + STE packets received will be silently discarded. + The value 'forced(3)' indicates the port will + always accept and propagate Spanning Tree Explorer + frames. This allows a manually configured + Spanning Tree for this class of packet to be + configured. Note that unlike transparent + bridging, this is not catastrophic to the network + if there are loops. The value 'auto-span(1)' can + only be returned by a bridge that both implements + the Spanning Tree Protocol and has use of the + protocol enabled on this port. The behavior of the + port for Spanning Tree Explorer frames is + determined by the state of dot1dStpPortState. If + the port is in the 'forwarding' state, the frame + will be accepted or propagated. Otherwise, it + will be silently discarded." + ::= { dot1dSrPortEntry 7 } + +dot1dSrPortSpecInFrames OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of Specifically Routed frames, also + referred to as Source Routed Frames, that have + been received from this port's segment." + ::= { dot1dSrPortEntry 8 } + +dot1dSrPortSpecOutFrames OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of Specifically Routed frames, also + referred to as Source Routed Frames, that this + port has transmitted on its segment." + ::= { dot1dSrPortEntry 9 } + +dot1dSrPortApeInFrames OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of All Paths Explorer frames, also + referred to as All Routes Explorer frames, that + have been received by this port from its segment." + ::= { dot1dSrPortEntry 10 } + +dot1dSrPortApeOutFrames OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of all Paths Explorer Frames, also + referred to as All Routes Explorer frames, that + have been transmitted by this port on its + segment." + ::= { dot1dSrPortEntry 11 } + +dot1dSrPortSteInFrames OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of spanning tree explorer frames that + have been received by this port from its segment." + ::= { dot1dSrPortEntry 12 } + +dot1dSrPortSteOutFrames OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of spanning tree explorer frames that + have been transmitted by this port on its + segment." + ::= { dot1dSrPortEntry 13 } + +dot1dSrPortSegmentMismatchDiscards OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of explorer frames that have been + discarded by this port because the routing + descriptor field contained an invalid adjacent + segment value." + ::= { dot1dSrPortEntry 14 } + +dot1dSrPortDuplicateSegmentDiscards OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of frames that have been discarded by + this port because the routing descriptor field + contained a duplicate segment identifier." + ::= { dot1dSrPortEntry 15 } + +dot1dSrPortHopCountExceededDiscards OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of explorer frames that have been + discarded by this port because the Routing + Information Field has exceeded the maximum route + descriptor length." + ::= { dot1dSrPortEntry 16 } + +dot1dSrPortDupLanIdOrTreeErrors OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of duplicate LAN IDs or Tree errors. + This helps in detection of problems in networks + containing older IBM Source Routing Bridges." + ::= { dot1dSrPortEntry 17 } + +dot1dSrPortLanIdMismatches OBJECT-TYPE + SYNTAX Counter + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of ARE and STE frames that were + discarded because the last LAN ID in the routing + information field did not equal the LAN-in ID. + This error can occur in implementations which do + only a LAN-in ID and Bridge Number check instead + of a LAN-in ID, Bridge Number, and LAN-out ID + check before they forward broadcast frames." + ::= { dot1dSrPortEntry 18 } + +-- scalar object in dot1dSr + +dot1dSrBridgeLfMode OBJECT-TYPE + SYNTAX INTEGER { + mode3(1), + mode6(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Indicates whether the bridge operates using older + 3 bit length negotiation fields or the newer 6 bit + length field in its RIF." + ::= { dot1dSr 2 } + +-- The Port-Pair Database + +-- Implementation of this group is optional. + +-- This group is implemented by those bridges that support +-- the direct multiport model of the source route bridging +-- mode as defined in the IEEE 802.5 SRT Addendum to +-- 802.1d. + +-- Bridges implementing this group may report 65535 for +-- dot1dSrPortBridgeNumber and dot1dSrPortTargetSegment, +-- indicating that those objects are not applicable. + +dot1dPortPairTableSize OBJECT-TYPE + SYNTAX Gauge + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The total number of entries in the Bridge Port + Pair Database." + ::= { dot1dPortPair 1 } + +-- the Bridge Port-Pair table + +-- this table represents port pairs within a bridge forming +-- a unique bridge path, as defined in the IEEE 802.5M SRT +-- Addendum. + +dot1dPortPairTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot1dPortPairEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A table that contains information about every + + port pair database entity associated with this + source routing bridge." + ::= { dot1dPortPair 2 } + +dot1dPortPairEntry OBJECT-TYPE + SYNTAX Dot1dPortPairEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A list of information for each port pair entity + of a bridge." + INDEX { dot1dPortPairLowPort, dot1dPortPairHighPort } + ::= { dot1dPortPairTable 1 } + +Dot1dPortPairEntry ::= + SEQUENCE { + dot1dPortPairLowPort + INTEGER, + dot1dPortPairHighPort + INTEGER, + dot1dPortPairBridgeNum + INTEGER, + dot1dPortPairBridgeState + INTEGER + } + +dot1dPortPairLowPort OBJECT-TYPE + SYNTAX INTEGER (1..65535) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The port number of the lower numbered port for + which this entry contains port pair database + information." + ::= { dot1dPortPairEntry 1 } + +dot1dPortPairHighPort OBJECT-TYPE + SYNTAX INTEGER (1..65535) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The port number of the higher numbered port for + which this entry contains port pair database + information." + ::= { dot1dPortPairEntry 2 } + +dot1dPortPairBridgeNum OBJECT-TYPE + SYNTAX INTEGER + + ACCESS read-write + STATUS mandatory + DESCRIPTION + "A bridge number that uniquely identifies the path + provided by this source routing bridge between the + segments connected to dot1dPortPairLowPort and + dot1dPortPairHighPort. The purpose of bridge + number is to disambiguate between multiple paths + connecting the same two LANs." + ::= { dot1dPortPairEntry 3 } + +dot1dPortPairBridgeState OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2), + invalid(3) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The state of dot1dPortPairBridgeNum. Writing + 'invalid(3)' to this object removes the + corresponding entry." + ::= { dot1dPortPairEntry 4 } + +END |