summaryrefslogtreecommitdiff
path: root/data/mibs/TRANSPORT-ADDRESS-MIB.txt
diff options
context:
space:
mode:
Diffstat (limited to 'data/mibs/TRANSPORT-ADDRESS-MIB.txt')
-rw-r--r--data/mibs/TRANSPORT-ADDRESS-MIB.txt421
1 files changed, 421 insertions, 0 deletions
diff --git a/data/mibs/TRANSPORT-ADDRESS-MIB.txt b/data/mibs/TRANSPORT-ADDRESS-MIB.txt
new file mode 100644
index 000000000..227886e78
--- /dev/null
+++ b/data/mibs/TRANSPORT-ADDRESS-MIB.txt
@@ -0,0 +1,421 @@
+TRANSPORT-ADDRESS-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ MODULE-IDENTITY, OBJECT-IDENTITY, mib-2 FROM SNMPv2-SMI
+ TEXTUAL-CONVENTION FROM SNMPv2-TC;
+
+transportAddressMIB MODULE-IDENTITY
+ LAST-UPDATED "200211010000Z"
+ ORGANIZATION
+ "IETF Operations and Management Area"
+ CONTACT-INFO
+ "Juergen Schoenwaelder (Editor)
+ TU Braunschweig
+ Bueltenweg 74/75
+ 38106 Braunschweig, Germany
+
+ Phone: +49 531 391-3289
+ EMail: schoenw@ibr.cs.tu-bs.de
+
+ Send comments to <mibs@ops.ietf.org>."
+ DESCRIPTION
+ "This MIB module provides commonly used transport
+ address definitions.
+
+ Copyright (C) The Internet Society (2002). This version of
+ this MIB module is part of RFC 3419; see the RFC itself for
+ full legal notices."
+
+ -- Revision log
+
+ REVISION "200211010000Z"
+ DESCRIPTION
+ "Initial version, published as RFC 3419."
+ ::= { mib-2 100 }
+
+transportDomains OBJECT IDENTIFIER ::= { transportAddressMIB 1 }
+
+transportDomainUdpIpv4 OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "The UDP over IPv4 transport domain. The corresponding
+ transport address is of type TransportAddressIPv4 for
+ global IPv4 addresses."
+ ::= { transportDomains 1 }
+
+transportDomainUdpIpv6 OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "The UDP over IPv6 transport domain. The corresponding
+ transport address is of type TransportAddressIPv6 for
+ global IPv6 addresses."
+ ::= { transportDomains 2 }
+
+transportDomainUdpIpv4z OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "The UDP over IPv4 transport domain. The corresponding
+ transport address is of type TransportAddressIPv4z for
+ scoped IPv4 addresses with a zone index."
+ ::= { transportDomains 3 }
+
+transportDomainUdpIpv6z OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "The UDP over IPv6 transport domain. The corresponding
+ transport address is of type TransportAddressIPv6z for
+ scoped IPv6 addresses with a zone index."
+ ::= { transportDomains 4 }
+
+transportDomainTcpIpv4 OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "The TCP over IPv4 transport domain. The corresponding
+ transport address is of type TransportAddressIPv4 for
+ global IPv4 addresses."
+ ::= { transportDomains 5 }
+
+transportDomainTcpIpv6 OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "The TCP over IPv6 transport domain. The corresponding
+ transport address is of type TransportAddressIPv6 for
+ global IPv6 addresses."
+ ::= { transportDomains 6 }
+
+transportDomainTcpIpv4z OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "The TCP over IPv4 transport domain. The corresponding
+ transport address is of type TransportAddressIPv4z for
+ scoped IPv4 addresses with a zone index."
+ ::= { transportDomains 7 }
+
+transportDomainTcpIpv6z OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "The TCP over IPv6 transport domain. The corresponding
+ transport address is of type TransportAddressIPv6z for
+ scoped IPv6 addresses with a zone index."
+ ::= { transportDomains 8 }
+
+transportDomainSctpIpv4 OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "The SCTP over IPv4 transport domain. The corresponding
+ transport address is of type TransportAddressIPv4 for
+ global IPv4 addresses. This transport domain usually
+ represents the primary address on multihomed SCTP
+ endpoints."
+ ::= { transportDomains 9 }
+
+transportDomainSctpIpv6 OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "The SCTP over IPv6 transport domain. The corresponding
+ transport address is of type TransportAddressIPv6 for
+ global IPv6 addresses. This transport domain usually
+ represents the primary address on multihomed SCTP
+ endpoints."
+ ::= { transportDomains 10 }
+
+transportDomainSctpIpv4z OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "The SCTP over IPv4 transport domain. The corresponding
+ transport address is of type TransportAddressIPv4z for
+ scoped IPv4 addresses with a zone index. This transport
+ domain usually represents the primary address on
+ multihomed SCTP endpoints."
+ ::= { transportDomains 11 }
+
+transportDomainSctpIpv6z OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "The SCTP over IPv6 transport domain. The corresponding
+ transport address is of type TransportAddressIPv6z for
+ scoped IPv6 addresses with a zone index. This transport
+ domain usually represents the primary address on
+ multihomed SCTP endpoints."
+ ::= { transportDomains 12 }
+
+transportDomainLocal OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "The Posix Local IPC transport domain. The corresponding
+ transport address is of type TransportAddressLocal.
+
+ The Posix Local IPC transport domain incorporates the
+ well-known UNIX domain sockets."
+ ::= { transportDomains 13 }
+
+transportDomainUdpDns OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "The UDP transport domain using fully qualified domain
+ names. The corresponding transport address is of type
+ TransportAddressDns."
+ ::= { transportDomains 14 }
+
+transportDomainTcpDns OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "The TCP transport domain using fully qualified domain
+ names. The corresponding transport address is of type
+ TransportAddressDns."
+ ::= { transportDomains 15 }
+
+transportDomainSctpDns OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION
+ "The SCTP transport domain using fully qualified domain
+ names. The corresponding transport address is of type
+ TransportAddressDns."
+ ::= { transportDomains 16 }
+
+TransportDomain ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "A value that represents a transport domain.
+
+ Some possible values, such as transportDomainUdpIpv4, are
+ defined in this module. Other possible values can be
+ defined in other MIB modules."
+ SYNTAX OBJECT IDENTIFIER
+
+--
+-- The enumerated values of the textual convention below should
+-- be identical to the last sub-identifier of the OID registered
+-- for the same domain.
+--
+
+TransportAddressType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "A value that represents a transport domain. This is the
+ enumerated version of the transport domain registrations
+ in this MIB module. The enumerated values have the
+ following meaning:
+
+ unknown(0) unknown transport address type
+ udpIpv4(1) transportDomainUdpIpv4
+ udpIpv6(2) transportDomainUdpIpv6
+ udpIpv4z(3) transportDomainUdpIpv4z
+ udpIpv6z(4) transportDomainUdpIpv6z
+ tcpIpv4(5) transportDomainTcpIpv4
+ tcpIpv6(6) transportDomainTcpIpv6
+ tcpIpv4z(7) transportDomainTcpIpv4z
+
+ tcpIpv6z(8) transportDomainTcpIpv6z
+ sctpIpv4(9) transportDomainSctpIpv4
+ sctpIpv6(10) transportDomainSctpIpv6
+ sctpIpv4z(11) transportDomainSctpIpv4z
+ sctpIpv6z(12) transportDomainSctpIpv6z
+ local(13) transportDomainLocal
+ udpDns(14) transportDomainUdpDns
+ tcpDns(15) transportDomainTcpDns
+ sctpDns(16) transportDomainSctpDns
+
+ This textual convention can be used to represent transport
+ domains in situations where a syntax of TransportDomain is
+ unwieldy (for example, when used as an index).
+
+ The usage of this textual convention implies that additional
+ transport domains can only be supported by updating this MIB
+ module. This extensibility restriction does not apply for the
+ TransportDomain textual convention which allows MIB authors
+ to define additional transport domains independently in
+ other MIB modules."
+ SYNTAX INTEGER {
+ unknown(0),
+ udpIpv4(1),
+ udpIpv6(2),
+ udpIpv4z(3),
+ udpIpv6z(4),
+ tcpIpv4(5),
+ tcpIpv6(6),
+ tcpIpv4z(7),
+ tcpIpv6z(8),
+ sctpIpv4(9),
+ sctpIpv6(10),
+ sctpIpv4z(11),
+ sctpIpv6z(12),
+ local(13),
+ udpDns(14),
+ tcpDns(15),
+ sctpDns(16)
+ }
+
+TransportAddress ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "Denotes a generic transport address.
+
+ A TransportAddress value is always interpreted within the
+ context of a TransportAddressType or TransportDomain value.
+ Every usage of the TransportAddress textual convention MUST
+
+ specify the TransportAddressType or TransportDomain object
+ which provides the context. Furthermore, MIB authors SHOULD
+ define a separate TransportAddressType or TransportDomain
+ object for each TransportAddress object. It is suggested that
+ the TransportAddressType or TransportDomain is logically
+ registered before the object(s) which use the
+ TransportAddress textual convention if they appear in the
+ same logical row.
+
+ The value of a TransportAddress object must always be
+ consistent with the value of the associated
+ TransportAddressType or TransportDomain object. Attempts
+ to set a TransportAddress object to a value which is
+ inconsistent with the associated TransportAddressType or
+ TransportDomain must fail with an inconsistentValue error.
+
+ When this textual convention is used as a syntax of an
+ index object, there may be issues with the limit of 128
+ sub-identifiers specified in SMIv2, STD 58. In this case,
+ the OBJECT-TYPE declaration MUST include a 'SIZE' clause
+ to limit the number of potential instance sub-identifiers."
+ SYNTAX OCTET STRING (SIZE (0..255))
+
+TransportAddressIPv4 ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "1d.1d.1d.1d:2d"
+ STATUS current
+ DESCRIPTION
+ "Represents a transport address consisting of an IPv4
+ address and a port number (as used for example by UDP,
+ TCP and SCTP):
+
+ octets contents encoding
+ 1-4 IPv4 address network-byte order
+ 5-6 port number network-byte order
+
+ This textual convention SHOULD NOT be used directly in object
+ definitions since it restricts addresses to a specific format.
+ However, if it is used, it MAY be used either on its own or
+ in conjunction with TransportAddressType or TransportDomain
+ as a pair."
+ SYNTAX OCTET STRING (SIZE (6))
+
+TransportAddressIPv6 ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "0a[2x:2x:2x:2x:2x:2x:2x:2x]0a:2d"
+ STATUS current
+ DESCRIPTION
+ "Represents a transport address consisting of an IPv6
+ address and a port number (as used for example by UDP,
+ TCP and SCTP):
+
+ octets contents encoding
+ 1-16 IPv6 address network-byte order
+ 17-18 port number network-byte order
+
+ This textual convention SHOULD NOT be used directly in object
+ definitions since it restricts addresses to a specific format.
+ However, if it is used, it MAY be used either on its own or
+ in conjunction with TransportAddressType or TransportDomain
+ as a pair."
+ SYNTAX OCTET STRING (SIZE (18))
+
+TransportAddressIPv4z ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "1d.1d.1d.1d%4d:2d"
+ STATUS current
+ DESCRIPTION
+ "Represents a transport address consisting of an IPv4
+ address, a zone index and a port number (as used for
+ example by UDP, TCP and SCTP):
+
+ octets contents encoding
+ 1-4 IPv4 address network-byte order
+ 5-8 zone index network-byte order
+ 9-10 port number network-byte order
+
+ This textual convention SHOULD NOT be used directly in object
+ definitions since it restricts addresses to a specific format.
+ However, if it is used, it MAY be used either on its own or
+ in conjunction with TransportAddressType or TransportDomain
+ as a pair."
+ SYNTAX OCTET STRING (SIZE (10))
+
+TransportAddressIPv6z ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "0a[2x:2x:2x:2x:2x:2x:2x:2x%4d]0a:2d"
+ STATUS current
+ DESCRIPTION
+ "Represents a transport address consisting of an IPv6
+ address, a zone index and a port number (as used for
+ example by UDP, TCP and SCTP):
+
+ octets contents encoding
+ 1-16 IPv6 address network-byte order
+ 17-20 zone index network-byte order
+ 21-22 port number network-byte order
+
+ This textual convention SHOULD NOT be used directly in object
+ definitions since it restricts addresses to a specific format.
+
+ However, if it is used, it MAY be used either on its own or
+ in conjunction with TransportAddressType or TransportDomain
+ as a pair."
+ SYNTAX OCTET STRING (SIZE (22))
+
+TransportAddressLocal ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "1a"
+ STATUS current
+ DESCRIPTION
+ "Represents a POSIX Local IPC transport address:
+
+ octets contents encoding
+ all POSIX Local IPC address string
+
+ The Posix Local IPC transport domain subsumes UNIX domain
+ sockets.
+
+ This textual convention SHOULD NOT be used directly in object
+ definitions since it restricts addresses to a specific format.
+ However, if it is used, it MAY be used either on its own or
+ in conjunction with TransportAddressType or TransportDomain
+ as a pair.
+
+ When this textual convention is used as a syntax of an
+ index object, there may be issues with the limit of 128
+ sub-identifiers specified in SMIv2, STD 58. In this case,
+ the OBJECT-TYPE declaration MUST include a 'SIZE' clause
+ to limit the number of potential instance sub-identifiers."
+ REFERENCE
+ "Protocol Independent Interfaces (IEEE POSIX 1003.1g)"
+ SYNTAX OCTET STRING (SIZE (1..255))
+
+TransportAddressDns ::= TEXTUAL-CONVENTION
+ DISPLAY-HINT "1a"
+ STATUS current
+ DESCRIPTION
+ "Represents a DNS domain name followed by a colon ':'
+ (ASCII character 0x3A) and a port number in ASCII.
+ The name SHOULD be fully qualified whenever possible.
+
+ Values of this textual convention are not directly useable as
+ transport-layer addressing information, and require runtime
+ resolution. As such, applications that write them must be
+ prepared for handling errors if such values are not
+ supported, or cannot be resolved (if resolution occurs at the
+ time of the management operation).
+
+ The DESCRIPTION clause of TransportAddress objects that may
+
+ have TransportAddressDns values must fully describe how (and
+ when) such names are to be resolved to IP addresses and vice
+ versa.
+
+ This textual convention SHOULD NOT be used directly in object
+ definitions since it restricts addresses to a specific format.
+ However, if it is used, it MAY be used either on its own or
+ in conjunction with TransportAddressType or TransportDomain
+ as a pair.
+
+ When this textual convention is used as a syntax of an
+ index object, there may be issues with the limit of 128
+ sub-identifiers specified in SMIv2, STD 58. In this case,
+ the OBJECT-TYPE declaration MUST include a 'SIZE' clause
+ to limit the number of potential instance sub-identifiers."
+ SYNTAX OCTET STRING (SIZE (1..255))
+
+END