diff options
Diffstat (limited to 'data/mibs/UDP-MIB.txt')
| -rw-r--r-- | data/mibs/UDP-MIB.txt | 549 |
1 files changed, 549 insertions, 0 deletions
diff --git a/data/mibs/UDP-MIB.txt b/data/mibs/UDP-MIB.txt new file mode 100644 index 000000000..eec9dbadb --- /dev/null +++ b/data/mibs/UDP-MIB.txt @@ -0,0 +1,549 @@ +UDP-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, Counter64, + Unsigned32, IpAddress, mib-2 FROM SNMPv2-SMI + MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF + InetAddress, InetAddressType, + InetPortNumber FROM INET-ADDRESS-MIB; + +udpMIB MODULE-IDENTITY + LAST-UPDATED "200505200000Z" -- May 20, 2005 + ORGANIZATION + "IETF IPv6 Working Group + http://www.ietf.org/html.charters/ipv6-charter.html" + CONTACT-INFO + "Bill Fenner (editor) + + AT&T Labs -- Research + 75 Willow Rd. + Menlo Park, CA 94025 + + Phone: +1 650 330-7893 + Email: <fenner@research.att.com> + + John Flick (editor) + + Hewlett-Packard Company + 8000 Foothills Blvd. M/S 5557 + Roseville, CA 95747 + + Phone: +1 916 785 4018 + Email: <john.flick@hp.com> + + Send comments to <ipv6@ietf.org>" + DESCRIPTION + "The MIB module for managing UDP implementations. + Copyright (C) The Internet Society (2005). This + version of this MIB module is part of RFC 4113; + see the RFC itself for full legal notices." + REVISION "200505200000Z" -- May 20, 2005 + DESCRIPTION + "IP version neutral revision, incorporating the + following revisions: + + - Added udpHCInDatagrams and udpHCOutDatagrams in order + to provide high-capacity counters for fast networks. + - Added text to the descriptions of all counter objects + to indicate how discontinuities are detected. + - Deprecated the IPv4-specific udpTable and replaced it + with the version neutral udpEndpointTable. This + table includes support for connected UDP endpoints + and support for identification of the operating + system process associated with a UDP endpoint. + - Deprecated the udpGroup and replaced it with object + groups representing the current set of objects. + - Deprecated udpMIBCompliance and replaced it with + udpMIBCompliance2, which includes the compliance + information for the new object groups. + + This version published as RFC 4113." + REVISION "199411010000Z" -- November 1, 1994 + DESCRIPTION + "Initial SMIv2 version, published as RFC 2013." + REVISION "199103310000Z" -- March 31, 1991 + DESCRIPTION + "The initial revision of this MIB module was part of + MIB-II, published as RFC 1213." + ::= { mib-2 50 } + +-- the UDP group + +udp OBJECT IDENTIFIER ::= { mib-2 7 } + +udpInDatagrams OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of UDP datagrams delivered to UDP + users. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by discontinuities in the + value of sysUpTime." + ::= { udp 1 } + +udpNoPorts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of received UDP datagrams for which + there was no application at the destination port. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by discontinuities in the + value of sysUpTime." + ::= { udp 2 } + +udpInErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of received UDP datagrams that could not be + delivered for reasons other than the lack of an + application at the destination port. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by discontinuities in the + value of sysUpTime." + ::= { udp 3 } + +udpOutDatagrams OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of UDP datagrams sent from this + entity. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by discontinuities in the + value of sysUpTime." + ::= { udp 4 } + +udpHCInDatagrams OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of UDP datagrams delivered to UDP + users, for devices that can receive more than 1 + million UDP datagrams per second. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by discontinuities in the + value of sysUpTime." + ::= { udp 8 } + +udpHCOutDatagrams OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total number of UDP datagrams sent from this + entity, for devices that can transmit more than 1 + million UDP datagrams per second. + + Discontinuities in the value of this counter can occur + at re-initialization of the management system, and at + other times as indicated by discontinuities in the + value of sysUpTime." + ::= { udp 9 } + +-- +-- { udp 6 } was defined as the ipv6UdpTable in RFC2454's +-- IPV6-UDP-MIB. This RFC obsoletes RFC 2454, so { udp 6 } is +-- obsoleted. +-- + +-- The UDP "Endpoint" table. + +udpEndpointTable OBJECT-TYPE + SYNTAX SEQUENCE OF UdpEndpointEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing information about this entity's UDP + endpoints on which a local application is currently + accepting or sending datagrams. + + The address type in this table represents the address + type used for the communication, irrespective of the + higher-layer abstraction. For example, an application + using IPv6 'sockets' to communicate via IPv4 between + ::ffff:10.0.0.1 and ::ffff:10.0.0.2 would use + InetAddressType ipv4(1). + + Unlike the udpTable in RFC 2013, this table also allows + the representation of an application that completely + specifies both local and remote addresses and ports. A + listening application is represented in three possible + ways: + + 1) An application that is willing to accept both IPv4 + and IPv6 datagrams is represented by a + udpEndpointLocalAddressType of unknown(0) and a + udpEndpointLocalAddress of ''h (a zero-length + octet-string). + + 2) An application that is willing to accept only IPv4 + or only IPv6 datagrams is represented by a + udpEndpointLocalAddressType of the appropriate + address type and a udpEndpointLocalAddress of + '0.0.0.0' or '::' respectively. + + 3) An application that is listening for datagrams only + for a specific IP address but from any remote + system is represented by a + udpEndpointLocalAddressType of the appropriate + address type, with udpEndpointLocalAddress + specifying the local address. + + In all cases where the remote is a wildcard, the + udpEndpointRemoteAddressType is unknown(0), the + udpEndpointRemoteAddress is ''h (a zero-length + octet-string), and the udpEndpointRemotePort is 0. + + If the operating system is demultiplexing UDP packets + by remote address and port, or if the application has + 'connected' the socket specifying a default remote + address and port, the udpEndpointRemote* values should + be used to reflect this." + ::= { udp 7 } + +udpEndpointEntry OBJECT-TYPE + SYNTAX UdpEndpointEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Information about a particular current UDP endpoint. + + Implementers need to be aware that if the total number + of elements (octets or sub-identifiers) in + udpEndpointLocalAddress and udpEndpointRemoteAddress + exceeds 111, then OIDs of column instances in this table + will have more than 128 sub-identifiers and cannot be + accessed using SNMPv1, SNMPv2c, or SNMPv3." + INDEX { udpEndpointLocalAddressType, + udpEndpointLocalAddress, + udpEndpointLocalPort, + udpEndpointRemoteAddressType, + udpEndpointRemoteAddress, + udpEndpointRemotePort, + udpEndpointInstance } + ::= { udpEndpointTable 1 } + +UdpEndpointEntry ::= SEQUENCE { + udpEndpointLocalAddressType InetAddressType, + udpEndpointLocalAddress InetAddress, + udpEndpointLocalPort InetPortNumber, + udpEndpointRemoteAddressType InetAddressType, + udpEndpointRemoteAddress InetAddress, + udpEndpointRemotePort InetPortNumber, + udpEndpointInstance Unsigned32, + udpEndpointProcess Unsigned32 + } + +udpEndpointLocalAddressType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The address type of udpEndpointLocalAddress. Only + IPv4, IPv4z, IPv6, and IPv6z addresses are expected, or + unknown(0) if datagrams for all local IP addresses are + accepted." + ::= { udpEndpointEntry 1 } + +udpEndpointLocalAddress OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The local IP address for this UDP endpoint. + + The value of this object can be represented in three + + possible ways, depending on the characteristics of the + listening application: + + 1. For an application that is willing to accept both + IPv4 and IPv6 datagrams, the value of this object + must be ''h (a zero-length octet-string), with + the value of the corresponding instance of the + udpEndpointLocalAddressType object being unknown(0). + + 2. For an application that is willing to accept only IPv4 + or only IPv6 datagrams, the value of this object + must be '0.0.0.0' or '::', respectively, while the + corresponding instance of the + udpEndpointLocalAddressType object represents the + appropriate address type. + + 3. For an application that is listening for data + destined only to a specific IP address, the value + of this object is the specific IP address for which + this node is receiving packets, with the + corresponding instance of the + udpEndpointLocalAddressType object representing the + appropriate address type. + + As this object is used in the index for the + udpEndpointTable, implementors of this table should be + careful not to create entries that would result in OIDs + with more than 128 subidentifiers; else the information + cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3." + ::= { udpEndpointEntry 2 } + +udpEndpointLocalPort OBJECT-TYPE + SYNTAX InetPortNumber + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The local port number for this UDP endpoint." + ::= { udpEndpointEntry 3 } + +udpEndpointRemoteAddressType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The address type of udpEndpointRemoteAddress. Only + IPv4, IPv4z, IPv6, and IPv6z addresses are expected, or + unknown(0) if datagrams for all remote IP addresses are + accepted. Also, note that some combinations of + + udpEndpointLocalAdressType and + udpEndpointRemoteAddressType are not supported. In + particular, if the value of this object is not + unknown(0), it is expected to always refer to the + same IP version as udpEndpointLocalAddressType." + ::= { udpEndpointEntry 4 } + +udpEndpointRemoteAddress OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The remote IP address for this UDP endpoint. If + datagrams from any remote system are to be accepted, + this value is ''h (a zero-length octet-string). + Otherwise, it has the type described by + udpEndpointRemoteAddressType and is the address of the + remote system from which datagrams are to be accepted + (or to which all datagrams will be sent). + + As this object is used in the index for the + udpEndpointTable, implementors of this table should be + careful not to create entries that would result in OIDs + with more than 128 subidentifiers; else the information + cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3." + ::= { udpEndpointEntry 5 } + +udpEndpointRemotePort OBJECT-TYPE + SYNTAX InetPortNumber + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The remote port number for this UDP endpoint. If + datagrams from any remote system are to be accepted, + this value is zero." + ::= { udpEndpointEntry 6 } + +udpEndpointInstance OBJECT-TYPE + SYNTAX Unsigned32 (1..'ffffffff'h) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The instance of this tuple. This object is used to + distinguish among multiple processes 'connected' to + the same UDP endpoint. For example, on a system + implementing the BSD sockets interface, this would be + used to support the SO_REUSEADDR and SO_REUSEPORT + socket options." + ::= { udpEndpointEntry 7 } + +udpEndpointProcess OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The system's process ID for the process associated with + this endpoint, or zero if there is no such process. + This value is expected to be the same as + HOST-RESOURCES-MIB::hrSWRunIndex or SYSAPPL-MIB:: + sysApplElmtRunIndex for some row in the appropriate + tables." + ::= { udpEndpointEntry 8 } + +-- The deprecated UDP Listener table + +-- The deprecated UDP listener table only contains information +-- about this entity's IPv4 UDP end-points on which a local +-- application is currently accepting datagrams. It does not +-- provide more detailed connection information, or information +-- about IPv6 endpoints. + +udpTable OBJECT-TYPE + SYNTAX SEQUENCE OF UdpEntry + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "A table containing IPv4-specific UDP listener + information. It contains information about all local + IPv4 UDP end-points on which an application is + currently accepting datagrams. This table has been + deprecated in favor of the version neutral + udpEndpointTable." + ::= { udp 5 } + +udpEntry OBJECT-TYPE + SYNTAX UdpEntry + MAX-ACCESS not-accessible + STATUS deprecated + DESCRIPTION + "Information about a particular current UDP listener." + INDEX { udpLocalAddress, udpLocalPort } + ::= { udpTable 1 } + +UdpEntry ::= SEQUENCE { + udpLocalAddress IpAddress, + udpLocalPort Integer32 + +} + +udpLocalAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The local IP address for this UDP listener. In the + case of a UDP listener that is willing to accept + datagrams for any IP interface associated with the + node, the value 0.0.0.0 is used." + ::= { udpEntry 1 } + +udpLocalPort OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The local port number for this UDP listener." + ::= { udpEntry 2 } + +-- conformance information + +udpMIBConformance OBJECT IDENTIFIER ::= { udpMIB 2 } +udpMIBCompliances OBJECT IDENTIFIER ::= { udpMIBConformance 1 } +udpMIBGroups OBJECT IDENTIFIER ::= { udpMIBConformance 2 } + +-- compliance statements + +udpMIBCompliance2 MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for systems that implement + UDP. + + There are a number of INDEX objects that cannot be + represented in the form of OBJECT clauses in SMIv2, but + for which we have the following compliance + requirements, expressed in OBJECT clause form in this + description clause: + + -- OBJECT udpEndpointLocalAddressType + -- SYNTAX InetAddressType { unknown(0), ipv4(1), + -- ipv6(2), ipv4z(3), + -- ipv6z(4) } + -- DESCRIPTION + -- Support for dns(5) is not required. + -- OBJECT udpEndpointLocalAddress + + -- SYNTAX InetAddress (SIZE(0|4|8|16|20)) + -- DESCRIPTION + -- Support is only required for zero-length + -- octet-strings, and for scoped and unscoped + -- IPv4 and IPv6 addresses. + -- OBJECT udpEndpointRemoteAddressType + -- SYNTAX InetAddressType { unknown(0), ipv4(1), + -- ipv6(2), ipv4z(3), + -- ipv6z(4) } + -- DESCRIPTION + -- Support for dns(5) is not required. + -- OBJECT udpEndpointRemoteAddress + -- SYNTAX InetAddress (SIZE(0|4|8|16|20)) + -- DESCRIPTION + -- Support is only required for zero-length + -- octet-strings, and for scoped and unscoped + -- IPv4 and IPv6 addresses. + " + MODULE -- this module + MANDATORY-GROUPS { udpBaseGroup, udpEndpointGroup } + GROUP udpHCGroup + DESCRIPTION + "This group is mandatory for systems that + are capable of receiving or transmitting more than + 1 million UDP datagrams per second. 1 million + datagrams per second will cause a Counter32 to + wrap in just over an hour." + ::= { udpMIBCompliances 2 } + +udpMIBCompliance MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for IPv4-only systems that + implement UDP. For IP version independence, this + compliance statement is deprecated in favor of + udpMIBCompliance2. However, agents are still + encouraged to implement these objects in order to + interoperate with the deployed base of managers." + MODULE -- this module + MANDATORY-GROUPS { udpGroup } + ::= { udpMIBCompliances 1 } + +-- units of conformance + +udpGroup OBJECT-GROUP + OBJECTS { udpInDatagrams, udpNoPorts, + udpInErrors, udpOutDatagrams, + udpLocalAddress, udpLocalPort } + STATUS deprecated + DESCRIPTION + "The deprecated group of objects providing for + management of UDP over IPv4." + ::= { udpMIBGroups 1 } + +udpBaseGroup OBJECT-GROUP + OBJECTS { udpInDatagrams, udpNoPorts, udpInErrors, + udpOutDatagrams } + STATUS current + DESCRIPTION + "The group of objects providing for counters of UDP + statistics." + ::= { udpMIBGroups 2 } + +udpHCGroup OBJECT-GROUP + OBJECTS { udpHCInDatagrams, udpHCOutDatagrams } + STATUS current + DESCRIPTION + "The group of objects providing for counters of high + speed UDP implementations." + ::= { udpMIBGroups 3 } + +udpEndpointGroup OBJECT-GROUP + OBJECTS { udpEndpointProcess } + STATUS current + DESCRIPTION + "The group of objects providing for the IP version + independent management of UDP 'endpoints'." + ::= { udpMIBGroups 4 } + +END |