summaryrefslogtreecommitdiff
path: root/data/templates/firewall/upnpd.conf.j2
diff options
context:
space:
mode:
Diffstat (limited to 'data/templates/firewall/upnpd.conf.j2')
-rw-r--r--data/templates/firewall/upnpd.conf.j2172
1 files changed, 172 insertions, 0 deletions
diff --git a/data/templates/firewall/upnpd.conf.j2 b/data/templates/firewall/upnpd.conf.j2
new file mode 100644
index 000000000..27573cbf9
--- /dev/null
+++ b/data/templates/firewall/upnpd.conf.j2
@@ -0,0 +1,172 @@
+# This is the UPNP configuration file
+
+# WAN network interface
+ext_ifname={{ wan_interface }}
+{% if wan_ip is vyos_defined %}
+# If the WAN interface has several IP addresses, you
+# can specify the one to use below
+{% for addr in wan_ip %}
+ext_ip={{ addr }}
+{% endfor %}
+{% endif %}
+
+# LAN network interfaces IPs / networks
+{% if listen is vyos_defined %}
+# There can be multiple listening IPs for SSDP traffic, in that case
+# use multiple 'listening_ip=...' lines, one for each network interface.
+# It can be IP address or network interface name (ie. "eth0")
+# It is mandatory to use the network interface name in order to enable IPv6
+# HTTP is available on all interfaces.
+# When MULTIPLE_EXTERNAL_IP is enabled, the external IP
+# address associated with the subnet follows. For example:
+# listening_ip=192.168.0.1/24 88.22.44.13
+{% for addr in listen %}
+{% if addr | is_ipv4 %}
+listening_ip={{ addr }}
+{% elif addr | is_ipv6 %}
+ipv6_listening_ip={{ addr }}
+{% else %}
+listening_ip={{ addr }}
+{% endif %}
+{% endfor %}
+{% endif %}
+
+# CAUTION: mixing up WAN and LAN interfaces may introduce security risks!
+# Be sure to assign the correct interfaces to LAN and WAN and consider
+# implementing UPnP permission rules at the bottom of this configuration file
+
+# Port for HTTP (descriptions and SOAP) traffic. Set to 0 for autoselect.
+#http_port=0
+# Port for HTTPS. Set to 0 for autoselect (default)
+#https_port=0
+
+# Path to the UNIX socket used to communicate with MiniSSDPd
+# If running, MiniSSDPd will manage M-SEARCH answering.
+# default is /var/run/minissdpd.sock
+#minissdpdsocket=/var/run/minissdpd.sock
+
+{% if nat_pmp is vyos_defined %}
+# Enable NAT-PMP support (default is no)
+enable_natpmp=yes
+{% endif %}
+
+# Enable UPNP support (default is yes)
+enable_upnp=yes
+
+{% if pcp_lifetime is vyos_defined %}
+# PCP
+# Configure the minimum and maximum lifetime of a port mapping in seconds
+# 120s and 86400s (24h) are suggested values from PCP-base
+{% if pcp_lifetime.max is vyos_defined %}
+max_lifetime={{ pcp_lifetime.max }}
+{% endif %}
+{% if pcp_lifetime.min is vyos_defined %}
+min_lifetime={{ pcp_lifetime.min }}
+{% endif %}
+{% endif %}
+
+
+# To enable the next few runtime options, see compile time
+# ENABLE_MANUFACTURER_INFO_CONFIGURATION (config.h)
+
+{% if friendly_name is vyos_defined %}
+# Name of this service, default is "`uname -s` router"
+friendly_name= {{ friendly_name }}
+{% endif %}
+
+# Manufacturer name, default is "`uname -s`"
+manufacturer_name=VyOS
+
+# Manufacturer URL, default is URL of OS vendor
+manufacturer_url=https://vyos.io/
+
+# Model name, default is "`uname -s` router"
+model_name=VyOS Router Model
+
+# Model description, default is "`uname -s` router"
+model_description=Vyos open source enterprise router/firewall operating system
+
+# Model URL, default is URL of OS vendor
+model_url=https://vyos.io/
+
+{% if secure_mode is vyos_defined %}
+# Secure Mode, UPnP clients can only add mappings to their own IP
+secure_mode=yes
+{% else %}
+# Secure Mode, UPnP clients can only add mappings to their own IP
+secure_mode=no
+{% endif %}
+
+{% if presentation_url is vyos_defined %}
+# Default presentation URL is HTTP address on port 80
+# If set to an empty string, no presentationURL element will appear
+# in the XML description of the device, which prevents MS Windows
+# from displaying an icon in the "Network Connections" panel.
+#presentation_url= {{ presentation_url }}
+{% endif %}
+
+# Report system uptime instead of daemon uptime
+system_uptime=yes
+
+# Unused rules cleaning.
+# never remove any rule before this threshold for the number
+# of redirections is exceeded. default to 20
+clean_ruleset_threshold=10
+# Clean process work interval in seconds. default to 0 (disabled).
+# a 600 seconds (10 minutes) interval makes sense
+clean_ruleset_interval=600
+
+# Anchor name in pf (default is miniupnpd)
+anchor=VyOS
+
+uuid={{ uuid }}
+
+# Lease file location
+lease_file=/config/upnp.leases
+
+# Daemon's serial and model number when reporting to clients
+# (in XML description)
+#serial=12345678
+#model_number=1
+
+{% if rules is vyos_defined %}
+# UPnP permission rules
+# (allow|deny) (external port range) IP/mask (internal port range)
+# A port range is <min port>-<max port> or <port> if there is only
+# one port in the range.
+# IP/mask format must be nnn.nnn.nnn.nnn/nn
+# It is advised to only allow redirection of port >= 1024
+# and end the rule set with "deny 0-65535 0.0.0.0/0 0-65535"
+# The following default ruleset allows specific LAN side IP addresses
+# to request only ephemeral ports. It is recommended that users
+# modify the IP ranges to match their own internal networks, and
+# also consider implementing network-specific restrictions
+# CAUTION: failure to enforce any rules may permit insecure requests to be made!
+{% for rule, config in rules.items() %}
+{% if config.disable is vyos_defined %}
+{{ config.action }} {{ config.external_port_range }} {{ config.ip }} {{ config.internal_port_range }}
+{% endif %}
+{% endfor %}
+{% endif %}
+
+{% if stun is vyos_defined %}
+# WAN interface must have public IP address. Otherwise it is behind NAT
+# and port forwarding is impossible. In some cases WAN interface can be
+# behind unrestricted NAT 1:1 when all incoming traffic is NAT-ed and
+# routed to WAN interfaces without any filtering. In this cases miniupnpd
+# needs to know public IP address and it can be learnt by asking external
+# server via STUN protocol. Following option enable retrieving external
+# public IP address from STUN server and detection of NAT type. You need
+# to specify also external STUN server in stun_host option below.
+# This option is disabled by default.
+ext_perform_stun=yes
+# Specify STUN server, either hostname or IP address
+# Some public STUN servers:
+# stun.stunprotocol.org
+# stun.sipgate.net
+# stun.xten.com
+# stun.l.google.com (on non standard port 19302)
+ext_stun_host={{ stun.host }}
+# Specify STUN UDP port, by default it is standard port 3478.
+ext_stun_port={{ stun.port }}
+{% endif %}