diff options
Diffstat (limited to 'data/templates/firewall')
| -rw-r--r-- | data/templates/firewall/nftables-nat66.j2 | 41 | ||||
| -rw-r--r-- | data/templates/firewall/upnpd.conf.j2 | 15 |
2 files changed, 50 insertions, 6 deletions
diff --git a/data/templates/firewall/nftables-nat66.j2 b/data/templates/firewall/nftables-nat66.j2 index 2fe04b4ff..28714c7a7 100644 --- a/data/templates/firewall/nftables-nat66.j2 +++ b/data/templates/firewall/nftables-nat66.j2 @@ -7,6 +7,17 @@ {% set src_prefix = 'ip6 saddr ' ~ config.source.prefix.replace('!','!= ') if config.source.prefix is vyos_defined %} {% set source_address = 'ip6 saddr ' ~ config.source.address.replace('!','!= ') if config.source.address is vyos_defined %} {% set dest_address = 'ip6 daddr ' ~ config.destination.address.replace('!','!= ') if config.destination.address is vyos_defined %} +{# Port #} +{% if config.source.port is vyos_defined and config.source.port.startswith('!') %} +{% set src_port = 'sport != { ' ~ config.source.port.replace('!','') ~ ' }' %} +{% else %} +{% set src_port = 'sport { ' ~ config.source.port ~ ' }' if config.source.port is vyos_defined %} +{% endif %} +{% if config.destination.port is vyos_defined and config.destination.port.startswith('!') %} +{% set dst_port = 'dport != { ' ~ config.destination.port.replace('!','') ~ ' }' %} +{% else %} +{% set dst_port = 'dport { ' ~ config.destination.port ~ ' }' if config.destination.port is vyos_defined %} +{% endif %} {% if chain is vyos_defined('PREROUTING') %} {% set comment = 'DST-NAT66-' ~ rule %} {% set base_log = '[NAT66-DST-' ~ rule %} @@ -36,6 +47,14 @@ {% endif %} {% set interface = ' oifname "' ~ config.outbound_interface ~ '"' if config.outbound_interface is vyos_defined else '' %} {% endif %} +{% set trns_port = ':' ~ config.translation.port if config.translation.port is vyos_defined %} +{# protocol has a default value thus it is always present #} +{% if config.protocol is vyos_defined('tcp_udp') %} +{% set protocol = 'tcp' %} +{% set comment = comment ~ ' tcp_udp' %} +{% else %} +{% set protocol = config.protocol %} +{% endif %} {% if config.log is vyos_defined %} {% if config.translation.address is vyos_defined('masquerade') %} {% set log = base_log ~ '-MASQ]' %} @@ -43,6 +62,11 @@ {% set log = base_log ~ ']' %} {% endif %} {% endif %} +{% if config.exclude is vyos_defined %} +{# rule has been marked as 'exclude' thus we simply return here #} +{% set trns_addr = 'return' %} +{% set trns_port = '' %} +{% endif %} {% set output = 'add rule ip6 nat ' ~ chain ~ interface %} {# Count packets #} {% set output = output ~ ' counter' %} @@ -54,12 +78,18 @@ {% if src_prefix is vyos_defined %} {% set output = output ~ ' ' ~ src_prefix %} {% endif %} +{% if dst_port is vyos_defined %} +{% set output = output ~ ' ' ~ protocol ~ ' ' ~ dst_port %} +{% endif %} {% if dst_prefix is vyos_defined %} {% set output = output ~ ' ' ~ dst_prefix %} {% endif %} {% if source_address is vyos_defined %} {% set output = output ~ ' ' ~ source_address %} {% endif %} +{% if src_port is vyos_defined %} +{% set output = output ~ ' ' ~ protocol ~ ' ' ~ src_port %} +{% endif %} {% if dest_address is vyos_defined %} {% set output = output ~ ' ' ~ dest_address %} {% endif %} @@ -70,11 +100,22 @@ {% if trns_address is vyos_defined %} {% set output = output ~ ' ' ~ trns_address %} {% endif %} +{% if trns_port is vyos_defined %} +{# Do not add a whitespace here, translation port must be directly added after IP address #} +{# e.g. 2001:db8::1:3389 #} +{% set output = output ~ trns_port %} +{% endif %} {% if comment is vyos_defined %} {% set output = output ~ ' comment "' ~ comment ~ '"' %} {% endif %} {{ log_output if log_output is vyos_defined }} {{ output }} +{# Special handling if protocol is tcp_udp, we must repeat the entire rule with udp as protocol #} +{% if config.protocol is vyos_defined('tcp_udp') %} +{# Beware of trailing whitespace, without it the comment tcp_udp will be changed to udp_udp #} +{{ log_output | replace('tcp ', 'udp ') if log_output is vyos_defined }} +{{ output | replace('tcp ', 'udp ') }} +{% endif %} {% endmacro %} # Start with clean NAT table diff --git a/data/templates/firewall/upnpd.conf.j2 b/data/templates/firewall/upnpd.conf.j2 index 27573cbf9..e964fc696 100644 --- a/data/templates/firewall/upnpd.conf.j2 +++ b/data/templates/firewall/upnpd.conf.j2 @@ -71,7 +71,7 @@ min_lifetime={{ pcp_lifetime.min }} {% if friendly_name is vyos_defined %} # Name of this service, default is "`uname -s` router" -friendly_name= {{ friendly_name }} +friendly_name={{ friendly_name }} {% endif %} # Manufacturer name, default is "`uname -s`" @@ -117,7 +117,10 @@ clean_ruleset_threshold=10 clean_ruleset_interval=600 # Anchor name in pf (default is miniupnpd) -anchor=VyOS +# Something wrong with this option "anchor", comment it out +# vyos@r14# miniupnpd -vv -f /run/upnp/miniupnp.conf +# invalid option in file /run/upnp/miniupnp.conf line 74 : anchor=VyOS +#anchor=VyOS uuid={{ uuid }} @@ -129,7 +132,7 @@ lease_file=/config/upnp.leases #serial=12345678 #model_number=1 -{% if rules is vyos_defined %} +{% if rule is vyos_defined %} # UPnP permission rules # (allow|deny) (external port range) IP/mask (internal port range) # A port range is <min port>-<max port> or <port> if there is only @@ -142,9 +145,9 @@ lease_file=/config/upnp.leases # modify the IP ranges to match their own internal networks, and # also consider implementing network-specific restrictions # CAUTION: failure to enforce any rules may permit insecure requests to be made! -{% for rule, config in rules.items() %} -{% if config.disable is vyos_defined %} -{{ config.action }} {{ config.external_port_range }} {{ config.ip }} {{ config.internal_port_range }} +{% for rule, config in rule.items() %} +{% if config.disable is not vyos_defined %} +{{ config.action }} {{ config.external_port_range }} {{ config.ip }}{{ '/32' if '/' not in config.ip else '' }} {{ config.internal_port_range }} {% endif %} {% endfor %} {% endif %} |