summaryrefslogtreecommitdiff
path: root/data/templates/firewall
diff options
context:
space:
mode:
Diffstat (limited to 'data/templates/firewall')
-rw-r--r--data/templates/firewall/nftables-defines.j221
-rw-r--r--data/templates/firewall/nftables-vrf-zones.j217
-rw-r--r--data/templates/firewall/upnpd.conf.j2116
3 files changed, 105 insertions, 49 deletions
diff --git a/data/templates/firewall/nftables-defines.j2 b/data/templates/firewall/nftables-defines.j2
index a20c399ae..8a75ab2d6 100644
--- a/data/templates/firewall/nftables-defines.j2
+++ b/data/templates/firewall/nftables-defines.j2
@@ -98,5 +98,26 @@
}
{% endfor %}
{% endif %}
+
+{% if group.dynamic_group is vyos_defined %}
+{% if group.dynamic_group.address_group is vyos_defined and not is_ipv6 and is_l3 %}
+{% for group_name, group_conf in group.dynamic_group.address_group.items() %}
+ set DA_{{ group_name }} {
+ type {{ ip_type }}
+ flags dynamic, timeout
+ }
+{% endfor %}
+{% endif %}
+
+{% if group.dynamic_group.ipv6_address_group is vyos_defined and is_ipv6 and is_l3 %}
+{% for group_name, group_conf in group.dynamic_group.ipv6_address_group.items() %}
+ set DA6_{{ group_name }} {
+ type {{ ip_type }}
+ flags dynamic, timeout
+ }
+{% endfor %}
+{% endif %}
+{% endif %}
+
{% endif %}
{% endmacro %}
diff --git a/data/templates/firewall/nftables-vrf-zones.j2 b/data/templates/firewall/nftables-vrf-zones.j2
deleted file mode 100644
index 3bce7312d..000000000
--- a/data/templates/firewall/nftables-vrf-zones.j2
+++ /dev/null
@@ -1,17 +0,0 @@
-table inet vrf_zones {
- # Map of interfaces and connections tracking zones
- map ct_iface_map {
- typeof iifname : ct zone
- }
- # Assign unique zones for each VRF
- # Chain for inbound traffic
- chain vrf_zones_ct_in {
- type filter hook prerouting priority raw; policy accept;
- counter ct original zone set iifname map @ct_iface_map
- }
- # Chain for locally-generated traffic
- chain vrf_zones_ct_out {
- type filter hook output priority raw; policy accept;
- counter ct original zone set oifname map @ct_iface_map
- }
-}
diff --git a/data/templates/firewall/upnpd.conf.j2 b/data/templates/firewall/upnpd.conf.j2
index e964fc696..616e8869f 100644
--- a/data/templates/firewall/upnpd.conf.j2
+++ b/data/templates/firewall/upnpd.conf.j2
@@ -3,13 +3,42 @@
# WAN network interface
ext_ifname={{ wan_interface }}
{% if wan_ip is vyos_defined %}
+
+# if the WAN network interface for IPv6 is different than for IPv4,
+# set ext_ifname6
+#ext_ifname6=eth2
+
# If the WAN interface has several IP addresses, you
-# can specify the one to use below
+# can specify the one to use below.
+# Setting ext_ip is also useful in double NAT setup, you can declare here
+# the public IP address.
{% for addr in wan_ip %}
ext_ip={{ addr }}
{% endfor %}
{% endif %}
+{% if stun is vyos_defined %}
+# WAN interface must have public IP address. Otherwise it is behind NAT
+# and port forwarding is impossible. In some cases WAN interface can be
+# behind unrestricted full-cone NAT 1:1 when all incoming traffic is NAT-ed and
+# routed to WAN interfaces without any filtering. In this cases miniupnpd
+# needs to know public IP address and it can be learnt by asking external
+# server via STUN protocol. Following option enable retrieving external
+# public IP address from STUN server and detection of NAT type. You need
+# to specify also external STUN server in stun_host option below.
+# This option is disabled by default.
+ext_perform_stun=yes
+# Specify STUN server, either hostname or IP address
+# Some public STUN servers:
+# stun.stunprotocol.org
+# stun.sipgate.net
+# stun.xten.com
+# stun.l.google.com (on non standard port 19302)
+ext_stun_host={{ stun.host }}
+# Specify STUN UDP port, by default it is standard port 3478.
+ext_stun_port={{ stun.port }}
+{% endif %}
+
# LAN network interfaces IPs / networks
{% if listen is vyos_defined %}
# There can be multiple listening IPs for SSDP traffic, in that case
@@ -20,6 +49,9 @@ ext_ip={{ addr }}
# When MULTIPLE_EXTERNAL_IP is enabled, the external IP
# address associated with the subnet follows. For example:
# listening_ip=192.168.0.1/24 88.22.44.13
+# When MULTIPLE_EXTERNAL_IP is disabled, you can list associated network
+# interfaces (for bridges)
+# listening_ip=bridge0 em0 wlan0
{% for addr in listen %}
{% if addr | is_ipv4 %}
listening_ip={{ addr }}
@@ -65,6 +97,18 @@ min_lifetime={{ pcp_lifetime.min }}
{% endif %}
{% endif %}
+# table names for netfilter nft. Default is "filter" for both
+#upnp_table_name=
+#upnp_nat_table_name=
+# chain names for netfilter and netfilter nft
+# netfilter : default are MINIUPNPD, MINIUPNPD, MINIUPNPD-POSTROUTING
+# netfilter nft : default are miniupnpd, prerouting_miniupnpd, postrouting_miniupnpd
+#upnp_forward_chain=forwardUPnP
+#upnp_nat_chain=UPnP
+#upnp_nat_postrouting_chain=UPnP-Postrouting
+
+# Lease file location
+lease_file=/config/upnp.leases
# To enable the next few runtime options, see compile time
# ENABLE_MANUFACTURER_INFO_CONFIGURATION (config.h)
@@ -89,6 +133,11 @@ model_description=Vyos open source enterprise router/firewall operating system
# Model URL, default is URL of OS vendor
model_url=https://vyos.io/
+# Bitrates reported by daemon in bits per second
+# by default miniupnpd tries to get WAN interface speed
+#bitrate_up=1000000
+#bitrate_down=10000000
+
{% if secure_mode is vyos_defined %}
# Secure Mode, UPnP clients can only add mappings to their own IP
secure_mode=yes
@@ -108,6 +157,10 @@ secure_mode=no
# Report system uptime instead of daemon uptime
system_uptime=yes
+# Notify interval in seconds. default is 30 seconds.
+#notify_interval=240
+notify_interval=60
+
# Unused rules cleaning.
# never remove any rule before this threshold for the number
# of redirections is exceeded. default to 20
@@ -116,25 +169,46 @@ clean_ruleset_threshold=10
# a 600 seconds (10 minutes) interval makes sense
clean_ruleset_interval=600
+############################################################################
+## The next 5 config parameters (packet_log, anchor, queue, tag, quickrules)
+## are specific to BSD's pf(4) packet filter and hence cannot be enabled in
+## VyOS.
+# Log packets in pf (default is no)
+#packet_log=no
+
# Anchor name in pf (default is miniupnpd)
-# Something wrong with this option "anchor", comment it out
-# vyos@r14# miniupnpd -vv -f /run/upnp/miniupnp.conf
-# invalid option in file /run/upnp/miniupnp.conf line 74 : anchor=VyOS
-#anchor=VyOS
+#anchor=miniupnpd
-uuid={{ uuid }}
+# ALTQ queue in pf
+# Filter rules must be used for this to be used.
+# compile with PF_ENABLE_FILTER_RULES (see config.h file)
+#queue=queue_name1
-# Lease file location
-lease_file=/config/upnp.leases
+# Tag name in pf
+#tag=tag_name1
+
+# Make filter rules in pf quick or not. default is yes
+# active when compiled with PF_ENABLE_FILTER_RULES (see config.h file)
+#quickrules=no
+##
+## End of pf(4)-specific configuration not to be set in VyOS.
+############################################################################
+
+# UUID, generate your own UUID with "make genuuid"
+uuid={{ uuid }}
# Daemon's serial and model number when reporting to clients
# (in XML description)
#serial=12345678
#model_number=1
+# If compiled with IGD_V2 defined, force reporting IGDv1 in rootDesc (default
+# is no)
+#force_igd_desc_v1=no
+
{% if rule is vyos_defined %}
-# UPnP permission rules
-# (allow|deny) (external port range) IP/mask (internal port range)
+# UPnP permission rules (also enforced for NAT-PMP and PCP)
+# (allow|deny) (external port range) IP/mask (internal port range) (optional regex filter)
# A port range is <min port>-<max port> or <port> if there is only
# one port in the range.
# IP/mask format must be nnn.nnn.nnn.nnn/nn
@@ -151,25 +225,3 @@ lease_file=/config/upnp.leases
{% endif %}
{% endfor %}
{% endif %}
-
-{% if stun is vyos_defined %}
-# WAN interface must have public IP address. Otherwise it is behind NAT
-# and port forwarding is impossible. In some cases WAN interface can be
-# behind unrestricted NAT 1:1 when all incoming traffic is NAT-ed and
-# routed to WAN interfaces without any filtering. In this cases miniupnpd
-# needs to know public IP address and it can be learnt by asking external
-# server via STUN protocol. Following option enable retrieving external
-# public IP address from STUN server and detection of NAT type. You need
-# to specify also external STUN server in stun_host option below.
-# This option is disabled by default.
-ext_perform_stun=yes
-# Specify STUN server, either hostname or IP address
-# Some public STUN servers:
-# stun.stunprotocol.org
-# stun.sipgate.net
-# stun.xten.com
-# stun.l.google.com (on non standard port 19302)
-ext_stun_host={{ stun.host }}
-# Specify STUN UDP port, by default it is standard port 3478.
-ext_stun_port={{ stun.port }}
-{% endif %}
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 14:17:46 +0000