summaryrefslogtreecommitdiff
path: root/data/templates/ipsec
diff options
context:
space:
mode:
Diffstat (limited to 'data/templates/ipsec')
-rw-r--r--data/templates/ipsec/charon.tmpl342
1 files changed, 342 insertions, 0 deletions
diff --git a/data/templates/ipsec/charon.tmpl b/data/templates/ipsec/charon.tmpl
new file mode 100644
index 000000000..4d710921e
--- /dev/null
+++ b/data/templates/ipsec/charon.tmpl
@@ -0,0 +1,342 @@
+# Options for the charon IKE daemon.
+charon {
+
+ # Accept unencrypted ID and HASH payloads in IKEv1 Main Mode.
+ # accept_unencrypted_mainmode_messages = no
+
+ # Maximum number of half-open IKE_SAs for a single peer IP.
+ # block_threshold = 5
+
+ # Whether Certicate Revocation Lists (CRLs) fetched via HTTP or LDAP should
+ # be saved under a unique file name derived from the public key of the
+ # Certification Authority (CA) to /etc/ipsec.d/crls (stroke) or
+ # /etc/swanctl/x509crl (vici), respectively.
+ # cache_crls = no
+
+ # Whether relations in validated certificate chains should be cached in
+ # memory.
+ # cert_cache = yes
+
+ # Send Cisco Unity vendor ID payload (IKEv1 only).
+ # cisco_unity = no
+
+ # Close the IKE_SA if setup of the CHILD_SA along with IKE_AUTH failed.
+ # close_ike_on_child_failure = no
+
+ # Number of half-open IKE_SAs that activate the cookie mechanism.
+ # cookie_threshold = 10
+
+ # Delete CHILD_SAs right after they got successfully rekeyed (IKEv1 only).
+ # delete_rekeyed = no
+
+ # Use ANSI X9.42 DH exponent size or optimum size matched to cryptographic
+ # strength.
+ # dh_exponent_ansi_x9_42 = yes
+
+ # Use RTLD_NOW with dlopen when loading plugins and IMV/IMCs to reveal
+ # missing symbols immediately.
+ # dlopen_use_rtld_now = no
+
+ # DNS server assigned to peer via configuration payload (CP).
+ # dns1 =
+
+ # DNS server assigned to peer via configuration payload (CP).
+ # dns2 =
+
+ # Enable Denial of Service protection using cookies and aggressiveness
+ # checks.
+ # dos_protection = yes
+
+ # Compliance with the errata for RFC 4753.
+ # ecp_x_coordinate_only = yes
+
+ # Free objects during authentication (might conflict with plugins).
+ # flush_auth_cfg = no
+
+ # Whether to follow IKEv2 redirects (RFC 5685).
+ # follow_redirects = yes
+
+ # Maximum size (complete IP datagram size in bytes) of a sent IKE fragment
+ # when using proprietary IKEv1 or standardized IKEv2 fragmentation, defaults
+ # to 1280 (use 0 for address family specific default values, which uses a
+ # lower value for IPv4). If specified this limit is used for both IPv4 and
+ # IPv6.
+ # fragment_size = 1280
+
+ # Name of the group the daemon changes to after startup.
+ # group =
+
+ # Timeout in seconds for connecting IKE_SAs (also see IKE_SA_INIT DROPPING).
+ # half_open_timeout = 30
+
+ # Enable hash and URL support.
+ # hash_and_url = no
+
+ # Allow IKEv1 Aggressive Mode with pre-shared keys as responder.
+ # i_dont_care_about_security_and_use_aggressive_mode_psk = no
+
+ # Whether to ignore the traffic selectors from the kernel's acquire events
+ # for IKEv2 connections (they are not used for IKEv1).
+ # ignore_acquire_ts = no
+
+ # A space-separated list of routing tables to be excluded from route
+ # lookups.
+ # ignore_routing_tables =
+
+ # Maximum number of IKE_SAs that can be established at the same time before
+ # new connection attempts are blocked.
+ # ikesa_limit = 0
+
+ # Number of exclusively locked segments in the hash table.
+ # ikesa_table_segments = 1
+
+ # Size of the IKE_SA hash table.
+ # ikesa_table_size = 1
+
+ # Whether to close IKE_SA if the only CHILD_SA closed due to inactivity.
+ # inactivity_close_ike = no
+
+ # Limit new connections based on the current number of half open IKE_SAs,
+ # see IKE_SA_INIT DROPPING in strongswan.conf(5).
+ # init_limit_half_open = 0
+
+ # Limit new connections based on the number of queued jobs.
+ # init_limit_job_load = 0
+
+ # Causes charon daemon to ignore IKE initiation requests.
+ # initiator_only = no
+
+ # Install routes into a separate routing table for established IPsec
+ # tunnels.
+ install_routes = {{ install_routes }}
+
+ # Install virtual IP addresses.
+ # install_virtual_ip = yes
+
+ # The name of the interface on which virtual IP addresses should be
+ # installed.
+ # install_virtual_ip_on =
+
+ # Check daemon, libstrongswan and plugin integrity at startup.
+ # integrity_test = no
+
+ # A comma-separated list of network interfaces that should be ignored, if
+ # interfaces_use is specified this option has no effect.
+ # interfaces_ignore =
+
+ # A comma-separated list of network interfaces that should be used by
+ # charon. All other interfaces are ignored.
+ # interfaces_use =
+
+ # NAT keep alive interval.
+ # keep_alive = 20s
+
+ # Plugins to load in the IKE daemon charon.
+ # load =
+
+ # Determine plugins to load via each plugin's load option.
+ # load_modular = no
+
+ # Initiate IKEv2 reauthentication with a make-before-break scheme.
+ # make_before_break = no
+
+ # Maximum number of IKEv1 phase 2 exchanges per IKE_SA to keep state about
+ # and track concurrently.
+ # max_ikev1_exchanges = 3
+
+ # Maximum packet size accepted by charon.
+ # max_packet = 10000
+
+ # Enable multiple authentication exchanges (RFC 4739).
+ # multiple_authentication = yes
+
+ # WINS servers assigned to peer via configuration payload (CP).
+ # nbns1 =
+
+ # WINS servers assigned to peer via configuration payload (CP).
+ # nbns2 =
+
+ # UDP port used locally. If set to 0 a random port will be allocated.
+ # port = 500
+
+ # UDP port used locally in case of NAT-T. If set to 0 a random port will be
+ # allocated. Has to be different from charon.port, otherwise a random port
+ # will be allocated.
+ # port_nat_t = 4500
+
+ # Prefer locally configured proposals for IKE/IPsec over supplied ones as
+ # responder (disabling this can avoid keying retries due to
+ # INVALID_KE_PAYLOAD notifies).
+ # prefer_configured_proposals = yes
+
+ # By default public IPv6 addresses are preferred over temporary ones (RFC
+ # 4941), to make connections more stable. Enable this option to reverse
+ # this.
+ # prefer_temporary_addrs = no
+
+ # Process RTM_NEWROUTE and RTM_DELROUTE events.
+ # process_route = yes
+
+ # Delay in ms for receiving packets, to simulate larger RTT.
+ # receive_delay = 0
+
+ # Delay request messages.
+ # receive_delay_request = yes
+
+ # Delay response messages.
+ # receive_delay_response = yes
+
+ # Specific IKEv2 message type to delay, 0 for any.
+ # receive_delay_type = 0
+
+ # Size of the AH/ESP replay window, in packets.
+ # replay_window = 32
+
+ # Base to use for calculating exponential back off, see IKEv2 RETRANSMISSION
+ # in strongswan.conf(5).
+ # retransmit_base = 1.8
+
+ # Timeout in seconds before sending first retransmit.
+ # retransmit_timeout = 4.0
+
+ # Number of times to retransmit a packet before giving up.
+ # retransmit_tries = 5
+
+ # Interval in seconds to use when retrying to initiate an IKE_SA (e.g. if
+ # DNS resolution failed), 0 to disable retries.
+ # retry_initiate_interval = 0
+
+ # Initiate CHILD_SA within existing IKE_SAs (always enabled for IKEv1).
+ # reuse_ikesa = yes
+
+ # Numerical routing table to install routes to.
+ # routing_table =
+
+ # Priority of the routing table.
+ # routing_table_prio =
+
+ # Delay in ms for sending packets, to simulate larger RTT.
+ # send_delay = 0
+
+ # Delay request messages.
+ # send_delay_request = yes
+
+ # Delay response messages.
+ # send_delay_response = yes
+
+ # Specific IKEv2 message type to delay, 0 for any.
+ # send_delay_type = 0
+
+ # Send strongSwan vendor ID payload
+ # send_vendor_id = no
+
+ # Whether to enable Signature Authentication as per RFC 7427.
+ # signature_authentication = yes
+
+ # Whether to enable constraints against IKEv2 signature schemes.
+ # signature_authentication_constraints = yes
+
+ # Number of worker threads in charon.
+ # threads = 16
+
+ # Name of the user the daemon changes to after startup.
+ # user =
+
+ crypto_test {
+
+ # Benchmark crypto algorithms and order them by efficiency.
+ # bench = no
+
+ # Buffer size used for crypto benchmark.
+ # bench_size = 1024
+
+ # Number of iterations to test each algorithm.
+ # bench_time = 50
+
+ # Test crypto algorithms during registration (requires test vectors
+ # provided by the test-vectors plugin).
+ # on_add = no
+
+ # Test crypto algorithms on each crypto primitive instantiation.
+ # on_create = no
+
+ # Strictly require at least one test vector to enable an algorithm.
+ # required = no
+
+ # Whether to test RNG with TRUE quality; requires a lot of entropy.
+ # rng_true = no
+
+ }
+
+ host_resolver {
+
+ # Maximum number of concurrent resolver threads (they are terminated if
+ # unused).
+ # max_threads = 3
+
+ # Minimum number of resolver threads to keep around.
+ # min_threads = 0
+
+ }
+
+ leak_detective {
+
+ # Includes source file names and line numbers in leak detective output.
+ # detailed = yes
+
+ # Threshold in bytes for leaks to be reported (0 to report all).
+ # usage_threshold = 10240
+
+ # Threshold in number of allocations for leaks to be reported (0 to
+ # report all).
+ # usage_threshold_count = 0
+
+ }
+
+ processor {
+
+ # Section to configure the number of reserved threads per priority class
+ # see JOB PRIORITY MANAGEMENT in strongswan.conf(5).
+ priority_threads {
+
+ }
+
+ }
+
+ # Section containing a list of scripts (name = path) that are executed when
+ # the daemon is started.
+ start-scripts {
+
+ }
+
+ # Section containing a list of scripts (name = path) that are executed when
+ # the daemon is terminated.
+ stop-scripts {
+
+ }
+
+ tls {
+
+ # List of TLS encryption ciphers.
+ # cipher =
+
+ # List of TLS key exchange methods.
+ # key_exchange =
+
+ # List of TLS MAC algorithms.
+ # mac =
+
+ # List of TLS cipher suites.
+ # suites =
+
+ }
+
+ x509 {
+
+ # Discard certificates with unsupported or unknown critical extensions.
+ # enforce_critical = yes
+
+ }
+
+}
+