summaryrefslogtreecommitdiff
path: root/data/templates/ssh/sshd_config.tmpl
diff options
context:
space:
mode:
Diffstat (limited to 'data/templates/ssh/sshd_config.tmpl')
-rw-r--r--data/templates/ssh/sshd_config.tmpl142
1 files changed, 68 insertions, 74 deletions
diff --git a/data/templates/ssh/sshd_config.tmpl b/data/templates/ssh/sshd_config.tmpl
index 08fe56655..1c136bb23 100644
--- a/data/templates/ssh/sshd_config.tmpl
+++ b/data/templates/ssh/sshd_config.tmpl
@@ -1,6 +1,10 @@
### Autogenerated by ssh.py ###
+# https://linux.die.net/man/5/sshd_config
+
+#
# Non-configurable defaults
+#
Protocol 2
HostKey /etc/ssh/ssh_host_rsa_key
HostKey /etc/ssh/ssh_host_dsa_key
@@ -22,99 +26,89 @@ TCPKeepAlive yes
Banner /etc/issue.net
Subsystem sftp /usr/lib/openssh/sftp-server
UsePAM yes
+PermitRootLogin no
+
+#
+# User configurable section
+#
-# Specifies whether sshd should look up the remote host name,
-# and to check that the resolved host name for the remote IP
+# Look up remote host name and check that the resolved host name for the remote IP
# address maps back to the very same IP address.
-UseDNS {{ host_validation }}
+UseDNS {{ "no" if disable_host_validation is defined else "yes" }}
-# Specifies the port number that sshd listens on. The default is 22.
-# Multiple options of this type are permitted.
-{% for p in port %}
-Port {{ p }}
-{% endfor %}
+# Specifies the port number that sshd(8) listens on
+{% if port is string %}
+Port {{ port }}
+{% else %}
+{% for value in port %}
+Port {{ value }}
+{% endfor %}
+{% endif %}
# Gives the verbosity level that is used when logging messages from sshd
-LogLevel {{ log_level }}
-
-# Specifies whether root can log in using ssh
-PermitRootLogin no
+LogLevel {{ loglevel }}
# Specifies whether password authentication is allowed
-PasswordAuthentication {{ password_authentication }}
+PasswordAuthentication {{ "no" if disable_password_authentication is defined else "yes" }}
-{% if listen_on %}
+{% if listen_address %}
# Specifies the local addresses sshd should listen on
-{% for a in listen_on %}
-ListenAddress {{ a }}
-{% endfor %}
-{{ "\n" }}
-{% endif %}
-
-{%- if ciphers %}
-# Specifies the ciphers allowed. Multiple ciphers must be comma-separated.
-#
-# NOTE: As of now, there is no 'multi' node for 'ciphers', thus we have only one :/
-Ciphers {{ ciphers | join(",") }}
-{{ "\n" }}
-{% endif %}
-
-{%- if mac %}
-# Specifies the available MAC (message authentication code) algorithms. The MAC
-# algorithm is used for data integrity protection. Multiple algorithms must be
-# comma-separated.
-#
-# NOTE: As of now, there is no 'multi' node for 'mac', thus we have only one :/
-MACs {{ mac | join(",") }}
-{{ "\n" }}
-{% endif %}
-
-{%- if key_exchange %}
-# Specifies the available KEX (Key Exchange) algorithms. Multiple algorithms must
-# be comma-separated.
-#
-# NOTE: As of now, there is no 'multi' node for 'key-exchange', thus we have only one :/
-KexAlgorithms {{ key_exchange | join(",") }}
-{{ "\n" }}
+{% if listen_address is string %}
+ListenAddress {{ listen_address }}
+{% else %}
+{% for address in listen_address %}
+ListenAddress {{ value }}
+{% endfor %}
+{% endif %}
{% endif %}
-{%- if allow_users %}
-# This keyword can be followed by a list of user name patterns, separated by spaces.
-# If specified, login is allowed only for user names that match one of the patterns.
-# Only user names are valid, a numerical user ID is not recognized.
-AllowUsers {{ allow_users | join(" ") }}
-{{ "\n" }}
+{% if ciphers %}
+# Specifies the ciphers allowed for protocol version 2
+{% set value = ciphers if ciphers is string else ciphers | join(',') %}
+Ciphers {{ value }}
{% endif %}
-{%- if allow_groups %}
-# This keyword can be followed by a list of group name patterns, separated by spaces.
-# If specified, login is allowed only for users whose primary group or supplementary
-# group list matches one of the patterns. Only group names are valid, a numerical group
-# ID is not recognized.
-AllowGroups {{ allow_groups | join(" ") }}
-{{ "\n" }}
+{% if mac %}
+# Specifies the available MAC (message authentication code) algorithms
+{% set value = mac if mac is string else mac | join(',') %}
+MACs {{ value }}
{% endif %}
-{%- if deny_users %}
-# This keyword can be followed by a list of user name patterns, separated by spaces.
-# Login is disallowed for user names that match one of the patterns. Only user names
-# are valid, a numerical user ID is not recognized.
-DenyUsers {{ deny_users | join(" ") }}
-{{ "\n" }}
+{% if key_exchange %}
+# Specifies the available Key Exchange algorithms
+{% set value = key_exchange if key_exchange is string else key_exchange | join(',') %}
+KexAlgorithms {{ value }}
{% endif %}
-{%- if deny_groups %}
-# This keyword can be followed by a list of group name patterns, separated by spaces.
+{% if access_control is defined %}
+{% if access_control.allow is defined %}
+{% if access_control.allow.user is defined %}
+# If specified, login is allowed only for user names that match
+{% set value = access_control.allow.user if access_control.allow.user is string else access_control.allow.user | join(' ') %}
+AllowUsers {{ value }}
+{% endif %}
+{% if access_control.allow.group is defined %}
+# If specified, login is allowed only for users whose primary group or supplementary group list matches
+{% set value = access_control.allow.group if access_control.allow.group is string else access_control.allow.group | join(' ') %}
+AllowGroups {{ value }}
+{% endif %}
+{% endif %}
+{% if access_control.deny is defined %}
+{% if access_control.deny.user is defined %}
+# Login is disallowed for user names that match
+{% set value = access_control.deny.user if access_control.deny.user is string else access_control.deny.user | join(' ') %}
+DenyUsers {{ value }}
+{% endif %}
+{% if access_control.deny.group is defined %}
# Login is disallowed for users whose primary group or supplementary group list matches
-# one of the patterns. Only group names are valid, a numerical group ID is not recognized.
-DenyGroups {{ deny_groups | join(" ") }}
-{{ "\n" }}
+{% set value = access_control.deny.group if access_control.deny.group is string else access_control.deny.group | join(' ') %}
+DenyGroups {{ value }}
+{% endif %}
+{% endif %}
{% endif %}
-{%- if client_keepalive %}
+{% if client_keepalive_interval %}
# Sets a timeout interval in seconds after which if no data has been received from the client,
-# sshd will send a message through the encrypted channel to request a response from the client.
-# The default is 0, indicating that these messages will not be sent to the client.
-# This option applies to protocol version 2 only.
-ClientAliveInterval {{ client_keepalive }}
+# sshd(8) will send a message through the encrypted channel to request a response from the client
+ClientAliveInterval {{ client_keepalive_interval }}
{% endif %}