summaryrefslogtreecommitdiff
path: root/data/templates/wifi/hostapd.conf.tmpl
diff options
context:
space:
mode:
Diffstat (limited to 'data/templates/wifi/hostapd.conf.tmpl')
-rw-r--r--data/templates/wifi/hostapd.conf.tmpl12
1 files changed, 6 insertions, 6 deletions
diff --git a/data/templates/wifi/hostapd.conf.tmpl b/data/templates/wifi/hostapd.conf.tmpl
index 95837da95..16d9f7c98 100644
--- a/data/templates/wifi/hostapd.conf.tmpl
+++ b/data/templates/wifi/hostapd.conf.tmpl
@@ -72,18 +72,18 @@ ssid={{ ssid }}
channel={{ channel }}
{% endif %}
-{% if mode %}
+{% if mode is defined and mode is not none %}
# Operation mode (a = IEEE 802.11a (5 GHz), b = IEEE 802.11b (2.4 GHz),
# g = IEEE 802.11g (2.4 GHz), ad = IEEE 802.11ad (60 GHz); a/g options are used
# with IEEE 802.11n (HT), too, to specify band). For IEEE 802.11ac (VHT), this
-# needs to be set to hw_mode=a. For IEEE 802.11ax (HE) on 6 GHz this needs
-# to be set to hw_mode=a. When using ACS (see channel parameter), a
+# needs to be set to hw_mode a. For IEEE 802.11ax (HE) on 6 GHz this needs
+# to be set to hw_mode a. When using ACS (see channel parameter), a
# special value "any" can be used to indicate that any support band can be used.
# This special case is currently supported only with drivers with which
# offloaded ACS is used.
-{% if 'n' in mode %}
+{% if mode == 'n' %}
hw_mode=g
-{% elif 'ac' in mode %}
+{% elif mode == 'ac' %}
hw_mode=a
ieee80211h=1
ieee80211ac=1
@@ -533,7 +533,7 @@ wep_key{{ loop.index -1 }}={{ security.wep.key }}
# bit0 = WPA
# bit1 = IEEE 802.11i/RSN (WPA2) (dot11RSNAEnabled)
# Note that WPA3 is also configured with bit1 since it uses RSN just like WPA2.
-# In other words, for WPA3, wpa=2 is used the configuration (and
+# In other words, for WPA3, wpa 2 is used the configuration (and
# wpa_key_mgmt=SAE for WPA3-Personal instead of wpa_key_mgmt=WPA-PSK).
{% if security.wpa.mode is defined %}
{% if security.wpa.mode == 'wpa+wpa2' %}