diff options
Diffstat (limited to 'data/templates/wifi/hostapd.conf.tmpl')
| -rw-r--r-- | data/templates/wifi/hostapd.conf.tmpl | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/data/templates/wifi/hostapd.conf.tmpl b/data/templates/wifi/hostapd.conf.tmpl index 95837da95..16d9f7c98 100644 --- a/data/templates/wifi/hostapd.conf.tmpl +++ b/data/templates/wifi/hostapd.conf.tmpl @@ -72,18 +72,18 @@ ssid={{ ssid }} channel={{ channel }} {% endif %} -{% if mode %} +{% if mode is defined and mode is not none %} # Operation mode (a = IEEE 802.11a (5 GHz), b = IEEE 802.11b (2.4 GHz), # g = IEEE 802.11g (2.4 GHz), ad = IEEE 802.11ad (60 GHz); a/g options are used # with IEEE 802.11n (HT), too, to specify band). For IEEE 802.11ac (VHT), this -# needs to be set to hw_mode=a. For IEEE 802.11ax (HE) on 6 GHz this needs -# to be set to hw_mode=a. When using ACS (see channel parameter), a +# needs to be set to hw_mode a. For IEEE 802.11ax (HE) on 6 GHz this needs +# to be set to hw_mode a. When using ACS (see channel parameter), a # special value "any" can be used to indicate that any support band can be used. # This special case is currently supported only with drivers with which # offloaded ACS is used. -{% if 'n' in mode %} +{% if mode == 'n' %} hw_mode=g -{% elif 'ac' in mode %} +{% elif mode == 'ac' %} hw_mode=a ieee80211h=1 ieee80211ac=1 @@ -533,7 +533,7 @@ wep_key{{ loop.index -1 }}={{ security.wep.key }} # bit0 = WPA # bit1 = IEEE 802.11i/RSN (WPA2) (dot11RSNAEnabled) # Note that WPA3 is also configured with bit1 since it uses RSN just like WPA2. -# In other words, for WPA3, wpa=2 is used the configuration (and +# In other words, for WPA3, wpa 2 is used the configuration (and # wpa_key_mgmt=SAE for WPA3-Personal instead of wpa_key_mgmt=WPA-PSK). {% if security.wpa.mode is defined %} {% if security.wpa.mode == 'wpa+wpa2' %} |