diff options
Diffstat (limited to 'data/templates/wifi/wpa_supplicant.conf.tmpl')
| -rw-r--r-- | data/templates/wifi/wpa_supplicant.conf.tmpl | 70 |
1 files changed, 69 insertions, 1 deletions
diff --git a/data/templates/wifi/wpa_supplicant.conf.tmpl b/data/templates/wifi/wpa_supplicant.conf.tmpl index f84892dc0..20b4f7976 100644 --- a/data/templates/wifi/wpa_supplicant.conf.tmpl +++ b/data/templates/wifi/wpa_supplicant.conf.tmpl @@ -4,10 +4,78 @@ # https://w1.fi/cgit/hostap/plain/wpa_supplicant/wpa_supplicant.conf network={ + # ssid: SSID (mandatory); network name in one of the optional formats: + # - an ASCII string with double quotation + # - a hex string (two characters per octet of SSID) + # - a printf-escaped ASCII string P"<escaped string>" + # ssid="{{ ssid }}" + + # scan_ssid: + # 0 = do not scan this SSID with specific Probe Request frames (default) + # 1 = scan with SSID-specific Probe Request frames (this can be used to + # find APs that do not accept broadcast SSID or use multiple SSIDs; + # this will add latency to scanning, so enable this only when needed) scan_ssid=1 + {% if security is defined and security.wpa is defined and security.wpa.passphrase is defined %} - key_mgmt=WPA-PSK + # ieee80211w: whether management frame protection is enabled + # 0 = disabled (default unless changed with the global pmf parameter) + # 1 = optional + # 2 = required + # The most common configuration options for this based on the PMF (protected + # management frames) certification program are: + # PMF enabled: ieee80211w=1 and key_mgmt=WPA-EAP WPA-EAP-SHA256 + # PMF required: ieee80211w=2 and key_mgmt=WPA-EAP-SHA256 + # (and similarly for WPA-PSK and WPA-PSK-SHA256 if WPA2-Personal is used) + # WPA3-Personal-only mode: ieee80211w=2 and key_mgmt=SAE + ieee80211w=1 + + # key_mgmt: list of accepted authenticated key management protocols + # WPA-PSK = WPA pre-shared key (this requires 'psk' field) + # WPA-EAP = WPA using EAP authentication + # IEEE8021X = IEEE 802.1X using EAP authentication and (optionally) dynamically + # generated WEP keys + # NONE = WPA is not used; plaintext or static WEP could be used + # WPA-NONE = WPA-None for IBSS (deprecated; use proto=RSN key_mgmt=WPA-PSK + # instead) + # FT-PSK = Fast BSS Transition (IEEE 802.11r) with pre-shared key + # FT-EAP = Fast BSS Transition (IEEE 802.11r) with EAP authentication + # FT-EAP-SHA384 = Fast BSS Transition (IEEE 802.11r) with EAP authentication + # and using SHA384 + # WPA-PSK-SHA256 = Like WPA-PSK but using stronger SHA256-based algorithms + # WPA-EAP-SHA256 = Like WPA-EAP but using stronger SHA256-based algorithms + # SAE = Simultaneous authentication of equals; pre-shared key/password -based + # authentication with stronger security than WPA-PSK especially when using + # not that strong password; a.k.a. WPA3-Personal + # FT-SAE = SAE with FT + # WPA-EAP-SUITE-B = Suite B 128-bit level + # WPA-EAP-SUITE-B-192 = Suite B 192-bit level + # OSEN = Hotspot 2.0 Rel 2 online signup connection + # FILS-SHA256 = Fast Initial Link Setup with SHA256 + # FILS-SHA384 = Fast Initial Link Setup with SHA384 + # FT-FILS-SHA256 = FT and Fast Initial Link Setup with SHA256 + # FT-FILS-SHA384 = FT and Fast Initial Link Setup with SHA384 + # OWE = Opportunistic Wireless Encryption (a.k.a. Enhanced Open) + # DPP = Device Provisioning Protocol + # If not set, this defaults to: WPA-PSK WPA-EAP +{% if security.wpa.mode is defined and security.wpa.mode == 'wpa3' %} + key_mgmt=SAE +{% else %} + key_mgmt=WPA-PSK WPA-PSK-SHA256 +{% endif %} + + # psk: WPA preshared key; 256-bit pre-shared key + # The key used in WPA-PSK mode can be entered either as 64 hex-digits, i.e., + # 32 bytes or as an ASCII passphrase (in which case, the real PSK will be + # generated using the passphrase and SSID). ASCII passphrase must be between + # 8 and 63 characters (inclusive). ext:<name of external PSK field> format can + # be used to indicate that the PSK/passphrase is stored in external storage. + # This field is not needed, if WPA-EAP is used. + # Note: Separate tool, wpa_passphrase, can be used to generate 256-bit keys + # from ASCII passphrase. This process uses lot of CPU and wpa_supplicant + # startup and reconfiguration time can be optimized by generating the PSK only + # only when the passphrase or SSID has actually changed. psk="{{ security.wpa.passphrase }}" {% else %} key_mgmt=NONE |