summaryrefslogtreecommitdiff
path: root/data/templates
diff options
context:
space:
mode:
Diffstat (limited to 'data/templates')
-rw-r--r--data/templates/accel-ppp/config_chap_secrets_radius.j215
-rw-r--r--data/templates/accel-ppp/ipoe.config.j24
-rw-r--r--data/templates/accel-ppp/l2tp.config.j24
-rw-r--r--data/templates/accel-ppp/pppoe.config.j24
-rw-r--r--data/templates/accel-ppp/pptp.config.j24
-rw-r--r--data/templates/accel-ppp/sstp.config.j24
-rw-r--r--data/templates/firewall/upnpd.conf.j2227
-rw-r--r--data/templates/frr/isisd.frr.j28
-rw-r--r--data/templates/ids/suricata.j21280
-rw-r--r--data/templates/ids/suricata_logrotate.j217
-rw-r--r--data/templates/ipsec/ios_profile.j211
-rw-r--r--data/templates/load-balancing/haproxy.cfg.j219
-rw-r--r--data/templates/login/default_motd.j23
13 files changed, 1362 insertions, 238 deletions
diff --git a/data/templates/accel-ppp/config_chap_secrets_radius.j2 b/data/templates/accel-ppp/config_chap_secrets_radius.j2
index 595e3a565..e343ce461 100644
--- a/data/templates/accel-ppp/config_chap_secrets_radius.j2
+++ b/data/templates/accel-ppp/config_chap_secrets_radius.j2
@@ -5,7 +5,20 @@ chap-secrets={{ chap_secrets_file }}
[radius]
verbose=1
{% for server, options in authentication.radius.server.items() if not options.disable is vyos_defined %}
-server={{ server }},{{ options.key }},auth-port={{ options.port }},acct-port={{ options.acct_port }},req-limit=0,fail-time={{ options.fail_time }}
+{% set _server_cfg = "server=" %}
+{% set _server_cfg = _server_cfg + server %}
+{% set _server_cfg = _server_cfg + "," + options.key %}
+{% set _server_cfg = _server_cfg + ",auth-port=" + options.port %}
+{% set _server_cfg = _server_cfg + ",acct-port=" + options.acct_port %}
+{% set _server_cfg = _server_cfg + ",req-limit=0" %}
+{% set _server_cfg = _server_cfg + ",fail-time=" + options.fail_time %}
+{% if options.priority is vyos_defined %}
+{% set _server_cfg = _server_cfg + ",weight=" + options.priority %}
+{% endif %}
+{% if options.backup is vyos_defined %}
+{% set _server_cfg = _server_cfg + ",backup" %}
+{% endif %}
+{{ _server_cfg }}
{% endfor %}
{% if authentication.radius.accounting_interim_interval is vyos_defined %}
acct-interim-interval={{ authentication.radius.accounting_interim_interval }}
diff --git a/data/templates/accel-ppp/ipoe.config.j2 b/data/templates/accel-ppp/ipoe.config.j2
index c89812985..d87b90473 100644
--- a/data/templates/accel-ppp/ipoe.config.j2
+++ b/data/templates/accel-ppp/ipoe.config.j2
@@ -29,7 +29,9 @@ max-starting={{ max_concurrent_sessions }}
[log]
syslog=accel-ipoe,daemon
copy=1
-level=5
+{% if log.level is vyos_defined %}
+level={{ log.level }}
+{% endif %}
[ipoe]
verbose=1
diff --git a/data/templates/accel-ppp/l2tp.config.j2 b/data/templates/accel-ppp/l2tp.config.j2
index 4ce9042c2..db4db66a7 100644
--- a/data/templates/accel-ppp/l2tp.config.j2
+++ b/data/templates/accel-ppp/l2tp.config.j2
@@ -28,7 +28,9 @@ max-starting={{ max_concurrent_sessions }}
[log]
syslog=accel-l2tp,daemon
copy=1
-level=5
+{% if log.level is vyos_defined %}
+level={{ log.level }}
+{% endif %}
[client-ip-range]
0.0.0.0/0
diff --git a/data/templates/accel-ppp/pppoe.config.j2 b/data/templates/accel-ppp/pppoe.config.j2
index 42bc8440c..6711f2ec9 100644
--- a/data/templates/accel-ppp/pppoe.config.j2
+++ b/data/templates/accel-ppp/pppoe.config.j2
@@ -27,7 +27,9 @@ thread-count={{ thread_count }}
[log]
syslog=accel-pppoe,daemon
copy=1
-level=5
+{% if log.level is vyos_defined %}
+level={{ log.level }}
+{% endif %}
{% if authentication.mode is vyos_defined("noauth") %}
[auth]
diff --git a/data/templates/accel-ppp/pptp.config.j2 b/data/templates/accel-ppp/pptp.config.j2
index a04bd40c0..44f35998b 100644
--- a/data/templates/accel-ppp/pptp.config.j2
+++ b/data/templates/accel-ppp/pptp.config.j2
@@ -28,7 +28,9 @@ max-starting={{ max_concurrent_sessions }}
[log]
syslog=accel-pptp,daemon
copy=1
-level=5
+{% if log.level is vyos_defined %}
+level={{ log.level }}
+{% endif %}
[client-ip-range]
0.0.0.0/0
diff --git a/data/templates/accel-ppp/sstp.config.j2 b/data/templates/accel-ppp/sstp.config.j2
index 22fb55506..38da829f3 100644
--- a/data/templates/accel-ppp/sstp.config.j2
+++ b/data/templates/accel-ppp/sstp.config.j2
@@ -29,7 +29,9 @@ max-starting={{ max_concurrent_sessions }}
[log]
syslog=accel-sstp,daemon
copy=1
-level=5
+{% if log.level is vyos_defined %}
+level={{ log.level }}
+{% endif %}
[client-ip-range]
0.0.0.0/0
diff --git a/data/templates/firewall/upnpd.conf.j2 b/data/templates/firewall/upnpd.conf.j2
deleted file mode 100644
index 616e8869f..000000000
--- a/data/templates/firewall/upnpd.conf.j2
+++ /dev/null
@@ -1,227 +0,0 @@
-# This is the UPNP configuration file
-
-# WAN network interface
-ext_ifname={{ wan_interface }}
-{% if wan_ip is vyos_defined %}
-
-# if the WAN network interface for IPv6 is different than for IPv4,
-# set ext_ifname6
-#ext_ifname6=eth2
-
-# If the WAN interface has several IP addresses, you
-# can specify the one to use below.
-# Setting ext_ip is also useful in double NAT setup, you can declare here
-# the public IP address.
-{% for addr in wan_ip %}
-ext_ip={{ addr }}
-{% endfor %}
-{% endif %}
-
-{% if stun is vyos_defined %}
-# WAN interface must have public IP address. Otherwise it is behind NAT
-# and port forwarding is impossible. In some cases WAN interface can be
-# behind unrestricted full-cone NAT 1:1 when all incoming traffic is NAT-ed and
-# routed to WAN interfaces without any filtering. In this cases miniupnpd
-# needs to know public IP address and it can be learnt by asking external
-# server via STUN protocol. Following option enable retrieving external
-# public IP address from STUN server and detection of NAT type. You need
-# to specify also external STUN server in stun_host option below.
-# This option is disabled by default.
-ext_perform_stun=yes
-# Specify STUN server, either hostname or IP address
-# Some public STUN servers:
-# stun.stunprotocol.org
-# stun.sipgate.net
-# stun.xten.com
-# stun.l.google.com (on non standard port 19302)
-ext_stun_host={{ stun.host }}
-# Specify STUN UDP port, by default it is standard port 3478.
-ext_stun_port={{ stun.port }}
-{% endif %}
-
-# LAN network interfaces IPs / networks
-{% if listen is vyos_defined %}
-# There can be multiple listening IPs for SSDP traffic, in that case
-# use multiple 'listening_ip=...' lines, one for each network interface.
-# It can be IP address or network interface name (ie. "eth0")
-# It is mandatory to use the network interface name in order to enable IPv6
-# HTTP is available on all interfaces.
-# When MULTIPLE_EXTERNAL_IP is enabled, the external IP
-# address associated with the subnet follows. For example:
-# listening_ip=192.168.0.1/24 88.22.44.13
-# When MULTIPLE_EXTERNAL_IP is disabled, you can list associated network
-# interfaces (for bridges)
-# listening_ip=bridge0 em0 wlan0
-{% for addr in listen %}
-{% if addr | is_ipv4 %}
-listening_ip={{ addr }}
-{% elif addr | is_ipv6 %}
-ipv6_listening_ip={{ addr }}
-{% else %}
-listening_ip={{ addr }}
-{% endif %}
-{% endfor %}
-{% endif %}
-
-# CAUTION: mixing up WAN and LAN interfaces may introduce security risks!
-# Be sure to assign the correct interfaces to LAN and WAN and consider
-# implementing UPnP permission rules at the bottom of this configuration file
-
-# Port for HTTP (descriptions and SOAP) traffic. Set to 0 for autoselect.
-#http_port=0
-# Port for HTTPS. Set to 0 for autoselect (default)
-#https_port=0
-
-# Path to the UNIX socket used to communicate with MiniSSDPd
-# If running, MiniSSDPd will manage M-SEARCH answering.
-# default is /var/run/minissdpd.sock
-#minissdpdsocket=/var/run/minissdpd.sock
-
-{% if nat_pmp is vyos_defined %}
-# Enable NAT-PMP support (default is no)
-enable_natpmp=yes
-{% endif %}
-
-# Enable UPNP support (default is yes)
-enable_upnp=yes
-
-{% if pcp_lifetime is vyos_defined %}
-# PCP
-# Configure the minimum and maximum lifetime of a port mapping in seconds
-# 120s and 86400s (24h) are suggested values from PCP-base
-{% if pcp_lifetime.max is vyos_defined %}
-max_lifetime={{ pcp_lifetime.max }}
-{% endif %}
-{% if pcp_lifetime.min is vyos_defined %}
-min_lifetime={{ pcp_lifetime.min }}
-{% endif %}
-{% endif %}
-
-# table names for netfilter nft. Default is "filter" for both
-#upnp_table_name=
-#upnp_nat_table_name=
-# chain names for netfilter and netfilter nft
-# netfilter : default are MINIUPNPD, MINIUPNPD, MINIUPNPD-POSTROUTING
-# netfilter nft : default are miniupnpd, prerouting_miniupnpd, postrouting_miniupnpd
-#upnp_forward_chain=forwardUPnP
-#upnp_nat_chain=UPnP
-#upnp_nat_postrouting_chain=UPnP-Postrouting
-
-# Lease file location
-lease_file=/config/upnp.leases
-
-# To enable the next few runtime options, see compile time
-# ENABLE_MANUFACTURER_INFO_CONFIGURATION (config.h)
-
-{% if friendly_name is vyos_defined %}
-# Name of this service, default is "`uname -s` router"
-friendly_name={{ friendly_name }}
-{% endif %}
-
-# Manufacturer name, default is "`uname -s`"
-manufacturer_name=VyOS
-
-# Manufacturer URL, default is URL of OS vendor
-manufacturer_url=https://vyos.io/
-
-# Model name, default is "`uname -s` router"
-model_name=VyOS Router Model
-
-# Model description, default is "`uname -s` router"
-model_description=Vyos open source enterprise router/firewall operating system
-
-# Model URL, default is URL of OS vendor
-model_url=https://vyos.io/
-
-# Bitrates reported by daemon in bits per second
-# by default miniupnpd tries to get WAN interface speed
-#bitrate_up=1000000
-#bitrate_down=10000000
-
-{% if secure_mode is vyos_defined %}
-# Secure Mode, UPnP clients can only add mappings to their own IP
-secure_mode=yes
-{% else %}
-# Secure Mode, UPnP clients can only add mappings to their own IP
-secure_mode=no
-{% endif %}
-
-{% if presentation_url is vyos_defined %}
-# Default presentation URL is HTTP address on port 80
-# If set to an empty string, no presentationURL element will appear
-# in the XML description of the device, which prevents MS Windows
-# from displaying an icon in the "Network Connections" panel.
-#presentation_url= {{ presentation_url }}
-{% endif %}
-
-# Report system uptime instead of daemon uptime
-system_uptime=yes
-
-# Notify interval in seconds. default is 30 seconds.
-#notify_interval=240
-notify_interval=60
-
-# Unused rules cleaning.
-# never remove any rule before this threshold for the number
-# of redirections is exceeded. default to 20
-clean_ruleset_threshold=10
-# Clean process work interval in seconds. default to 0 (disabled).
-# a 600 seconds (10 minutes) interval makes sense
-clean_ruleset_interval=600
-
-############################################################################
-## The next 5 config parameters (packet_log, anchor, queue, tag, quickrules)
-## are specific to BSD's pf(4) packet filter and hence cannot be enabled in
-## VyOS.
-# Log packets in pf (default is no)
-#packet_log=no
-
-# Anchor name in pf (default is miniupnpd)
-#anchor=miniupnpd
-
-# ALTQ queue in pf
-# Filter rules must be used for this to be used.
-# compile with PF_ENABLE_FILTER_RULES (see config.h file)
-#queue=queue_name1
-
-# Tag name in pf
-#tag=tag_name1
-
-# Make filter rules in pf quick or not. default is yes
-# active when compiled with PF_ENABLE_FILTER_RULES (see config.h file)
-#quickrules=no
-##
-## End of pf(4)-specific configuration not to be set in VyOS.
-############################################################################
-
-# UUID, generate your own UUID with "make genuuid"
-uuid={{ uuid }}
-
-# Daemon's serial and model number when reporting to clients
-# (in XML description)
-#serial=12345678
-#model_number=1
-
-# If compiled with IGD_V2 defined, force reporting IGDv1 in rootDesc (default
-# is no)
-#force_igd_desc_v1=no
-
-{% if rule is vyos_defined %}
-# UPnP permission rules (also enforced for NAT-PMP and PCP)
-# (allow|deny) (external port range) IP/mask (internal port range) (optional regex filter)
-# A port range is <min port>-<max port> or <port> if there is only
-# one port in the range.
-# IP/mask format must be nnn.nnn.nnn.nnn/nn
-# It is advised to only allow redirection of port >= 1024
-# and end the rule set with "deny 0-65535 0.0.0.0/0 0-65535"
-# The following default ruleset allows specific LAN side IP addresses
-# to request only ephemeral ports. It is recommended that users
-# modify the IP ranges to match their own internal networks, and
-# also consider implementing network-specific restrictions
-# CAUTION: failure to enforce any rules may permit insecure requests to be made!
-{% for rule, config in rule.items() %}
-{% if config.disable is not vyos_defined %}
-{{ config.action }} {{ config.external_port_range }} {{ config.ip }}{{ '/32' if '/' not in config.ip else '' }} {{ config.internal_port_range }}
-{% endif %}
-{% endfor %}
-{% endif %}
diff --git a/data/templates/frr/isisd.frr.j2 b/data/templates/frr/isisd.frr.j2
index 1e1cc3c27..eb14aade6 100644
--- a/data/templates/frr/isisd.frr.j2
+++ b/data/templates/frr/isisd.frr.j2
@@ -76,6 +76,9 @@ advertise-passive-only
{% if set_overload_bit is vyos_defined %}
set-overload-bit
{% endif %}
+{% if metric_style is vyos_defined %}
+ metric-style {{ metric_style }}
+{% endif %}
{% if domain_password.md5 is vyos_defined %}
domain-password md5 {{ domain_password.plaintext_password }}
{% elif domain_password.plaintext_password is vyos_defined %}
@@ -178,7 +181,7 @@ advertise-passive-only
{% for priority, priority_limit_options in fast_reroute.lfa.local.priority_limit.items() %}
{% for level in priority_limit_options %}
fast-reroute priority-limit {{ priority }} {{ level | replace('_', '-') }}
-{% endfor %}
+{% endfor %}
{% endfor %}
{% endif %}
{% if fast_reroute.lfa.local.tiebreaker is vyos_defined %}
@@ -233,6 +236,9 @@ fast-reroute remote-lfa prefix-list {{ prefix_list }}
{% endfor %}
{% endfor %}
{% endif %}
+{% if topology is vyos_defined %}
+topology {{ topology }}
+{% endif %}
{% if level is vyos_defined('level-2') %}
is-type level-2-only
{% elif level is vyos_defined %}
diff --git a/data/templates/ids/suricata.j2 b/data/templates/ids/suricata.j2
new file mode 100644
index 000000000..585db93eb
--- /dev/null
+++ b/data/templates/ids/suricata.j2
@@ -0,0 +1,1280 @@
+%YAML 1.1
+---
+
+# Suricata configuration file. In addition to the comments describing all
+# options in this file, full documentation can be found at:
+# https://suricata.readthedocs.io/en/latest/configuration/suricata-yaml.html
+#
+# This configuration file generated by:
+# Suricata 6.0.10
+
+##
+## Step 1: Inform Suricata about your network
+##
+
+vars:
+ # more specific is better for alert accuracy and performance
+ address-groups:
+{% for (name, value) in suricata['address_group'] %}
+ {{ name }}: "[{{ value | join(',') }}]"
+{% endfor %}
+
+ port-groups:
+{% for (name, value) in suricata['port_group'] %}
+ {{ name }}: "[{{ value | join(',') }}]"
+{% endfor %}
+
+##
+## Step 2: Select outputs to enable
+##
+
+# The default logging directory. Any log or output file will be
+# placed here if it's not specified with a full path name. This can be
+# overridden with the -l command line parameter.
+default-log-dir: /var/log/suricata/
+
+# Configure the type of alert (and other) logging you would like.
+{% if suricata.log is vyos_defined %}
+outputs:
+{% if suricata.log.eve is vyos_defined %}
+ # Extensible Event Format (nicknamed EVE) event log in JSON format
+ - eve-log:
+ enabled: yes
+ filetype: {{ suricata.log.eve.filetype }} #regular|syslog|unix_dgram|unix_stream|redis
+ filename: {{ suricata.log.eve.filename }}
+
+ types:
+{% if suricata.log.eve.type is not vyos_defined or "alert" in suricata.log.eve.type %}
+ - alert:
+ tagged-packets: yes
+{% endif %}
+{% if "http" in suricata.log.eve.type %}
+ - http:
+ enabled: yes
+ extended: yes
+{% endif %}
+{% if "tls" in suricata.log.eve.type %}
+ - tls:
+ enabled: yes
+ extended: yes # enable this for extended logging information
+{% endif %}
+{% for protocol in suricata.log.eve.type %}
+{% if protocol not in ["alert","http","tls"] %}
+ - {{ protocol }}:
+ enabled: yes
+{% endif %}
+{% endfor %}
+{% endif %}
+{% endif %}
+
+##
+## Step 3: Configure common capture settings
+##
+## See "Advanced Capture Options" below for more options, including Netmap
+## and PF_RING.
+##
+
+# Linux high speed capture support
+af-packet:
+{% for interface in suricata.interface %}
+ - interface: {{ interface }}
+ # Default clusterid. AF_PACKET will load balance packets based on flow.
+ cluster-id: 99
+ # Default AF_PACKET cluster type. AF_PACKET can load balance per flow or per hash.
+ # This is only supported for Linux kernel > 3.1
+ # possible value are:
+ # * cluster_flow: all packets of a given flow are sent to the same socket
+ # * cluster_cpu: all packets treated in kernel by a CPU are sent to the same socket
+ # * cluster_qm: all packets linked by network card to a RSS queue are sent to the same
+ # socket. Requires at least Linux 3.14.
+ # * cluster_ebpf: eBPF file load balancing. See doc/userguide/capture-hardware/ebpf-xdp.rst for
+ # more info.
+ # Recommended modes are cluster_flow on most boxes and cluster_cpu or cluster_qm on system
+ # with capture card using RSS (requires cpu affinity tuning and system IRQ tuning)
+ cluster-type: cluster_flow
+ # In some fragmentation cases, the hash can not be computed. If "defrag" is set
+ # to yes, the kernel will do the needed defragmentation before sending the packets.
+ defrag: yes
+{% endfor %}
+
+# Cross platform libpcap capture support
+pcap:
+{% for interface in suricata.interface %}
+ - interface: {{ interface }}
+{% endfor %}
+
+# Settings for reading pcap files
+pcap-file:
+ # Possible values are:
+ # - yes: checksum validation is forced
+ # - no: checksum validation is disabled
+ # - auto: Suricata uses a statistical approach to detect when
+ # checksum off-loading is used. (default)
+ # Warning: 'checksum-validation' must be set to yes to have checksum tested
+ checksum-checks: auto
+
+# See "Advanced Capture Options" below for more options, including Netmap
+# and PF_RING.
+
+
+##
+## Step 4: App Layer Protocol configuration
+##
+
+# Configure the app-layer parsers.
+#
+# The error-policy setting applies to all app-layer parsers. Values can be
+# "drop-flow", "pass-flow", "bypass", "drop-packet", "pass-packet", "reject" or
+# "ignore" (the default).
+#
+# The protocol's section details each protocol.
+#
+# The option "enabled" takes 3 values - "yes", "no", "detection-only".
+# "yes" enables both detection and the parser, "no" disables both, and
+# "detection-only" enables protocol detection only (parser disabled).
+app-layer:
+ # error-policy: ignore
+ protocols:
+ rfb:
+ enabled: yes
+ detection-ports:
+ dp: 5900, 5901, 5902, 5903, 5904, 5905, 5906, 5907, 5908, 5909
+ # MQTT, disabled by default.
+ mqtt:
+ enabled: yes
+ # max-msg-length: 1mb
+ # subscribe-topic-match-limit: 100
+ # unsubscribe-topic-match-limit: 100
+ # Maximum number of live MQTT transactions per flow
+ # max-tx: 4096
+ krb5:
+ enabled: yes
+ snmp:
+ enabled: yes
+ ikev2:
+ enabled: yes
+ tls:
+ enabled: yes
+ detection-ports:
+ dp: 443
+
+ # Generate JA3 fingerprint from client hello. If not specified it
+ # will be disabled by default, but enabled if rules require it.
+ #ja3-fingerprints: auto
+
+ # What to do when the encrypted communications start:
+ # - default: keep tracking TLS session, check for protocol anomalies,
+ # inspect tls_* keywords. Disables inspection of unmodified
+ # 'content' signatures.
+ # - bypass: stop processing this flow as much as possible. No further
+ # TLS parsing and inspection. Offload flow bypass to kernel
+ # or hardware if possible.
+ # - full: keep tracking and inspection as normal. Unmodified content
+ # keyword signatures are inspected as well.
+ #
+ # For best performance, select 'bypass'.
+ #
+ #encryption-handling: default
+
+ dcerpc:
+ enabled: yes
+ ftp:
+ enabled: yes
+ # memcap: 64mb
+ rdp:
+ enabled: yes
+ ssh:
+ enabled: yes
+ #hassh: yes
+ # HTTP2: Experimental HTTP 2 support. Disabled by default.
+ http2:
+ enabled: no
+ # use http keywords on HTTP2 traffic
+ http1-rules: no
+ smtp:
+ enabled: yes
+ raw-extraction: no
+ # Configure SMTP-MIME Decoder
+ mime:
+ # Decode MIME messages from SMTP transactions
+ # (may be resource intensive)
+ # This field supersedes all others because it turns the entire
+ # process on or off
+ decode-mime: yes
+
+ # Decode MIME entity bodies (ie. Base64, quoted-printable, etc.)
+ decode-base64: yes
+ decode-quoted-printable: yes
+
+ # Maximum bytes per header data value stored in the data structure
+ # (default is 2000)
+ header-value-depth: 2000
+
+ # Extract URLs and save in state data structure
+ extract-urls: yes
+ # Set to yes to compute the md5 of the mail body. You will then
+ # be able to journalize it.
+ body-md5: no
+ # Configure inspected-tracker for file_data keyword
+ inspected-tracker:
+ content-limit: 100000
+ content-inspect-min-size: 32768
+ content-inspect-window: 4096
+ imap:
+ enabled: detection-only
+ smb:
+ enabled: yes
+ detection-ports:
+ dp: 139, 445
+
+ # Stream reassembly size for SMB streams. By default track it completely.
+ #stream-depth: 0
+
+ nfs:
+ enabled: yes
+ tftp:
+ enabled: yes
+ dns:
+ tcp:
+ enabled: yes
+ detection-ports:
+ dp: 53
+ udp:
+ enabled: yes
+ detection-ports:
+ dp: 53
+ http:
+ enabled: yes
+ # memcap: Maximum memory capacity for HTTP
+ # Default is unlimited, values can be 64mb, e.g.
+
+ # default-config: Used when no server-config matches
+ # personality: List of personalities used by default
+ # request-body-limit: Limit reassembly of request body for inspection
+ # by http_client_body & pcre /P option.
+ # response-body-limit: Limit reassembly of response body for inspection
+ # by file_data, http_server_body & pcre /Q option.
+ #
+ # For advanced options, see the user guide
+
+
+ # server-config: List of server configurations to use if address matches
+ # address: List of IP addresses or networks for this block
+ # personality: List of personalities used by this block
+ #
+ # Then, all the fields from default-config can be overloaded
+ #
+ # Currently Available Personalities:
+ # Minimal, Generic, IDS (default), IIS_4_0, IIS_5_0, IIS_5_1, IIS_6_0,
+ # IIS_7_0, IIS_7_5, Apache_2
+ libhtp:
+ default-config:
+ personality: IDS
+
+ # Can be specified in kb, mb, gb. Just a number indicates
+ # it's in bytes.
+ request-body-limit: 100kb
+ response-body-limit: 100kb
+
+ # inspection limits
+ request-body-minimal-inspect-size: 32kb
+ request-body-inspect-window: 4kb
+ response-body-minimal-inspect-size: 40kb
+ response-body-inspect-window: 16kb
+
+ # response body decompression (0 disables)
+ response-body-decompress-layer-limit: 2
+
+ # auto will use http-body-inline mode in IPS mode, yes or no set it statically
+ http-body-inline: auto
+
+ # Decompress SWF files.
+ # Two types: 'deflate', 'lzma', 'both' will decompress deflate and lzma
+ # compress-depth:
+ # Specifies the maximum amount of data to decompress,
+ # set 0 for unlimited.
+ # decompress-depth:
+ # Specifies the maximum amount of decompressed data to obtain,
+ # set 0 for unlimited.
+ swf-decompression:
+ enabled: yes
+ type: both
+ compress-depth: 100kb
+ decompress-depth: 100kb
+
+ # Use a random value for inspection sizes around the specified value.
+ # This lowers the risk of some evasion techniques but could lead
+ # to detection change between runs. It is set to 'yes' by default.
+ #randomize-inspection-sizes: yes
+ # If "randomize-inspection-sizes" is active, the value of various
+ # inspection size will be chosen from the [1 - range%, 1 + range%]
+ # range
+ # Default value of "randomize-inspection-range" is 10.
+ #randomize-inspection-range: 10
+
+ # decoding
+ double-decode-path: no
+ double-decode-query: no
+
+ # Can enable LZMA decompression
+ #lzma-enabled: false
+ # Memory limit usage for LZMA decompression dictionary
+ # Data is decompressed until dictionary reaches this size
+ #lzma-memlimit: 1mb
+ # Maximum decompressed size with a compression ratio
+ # above 2048 (only LZMA can reach this ratio, deflate cannot)
+ #compression-bomb-limit: 1mb
+ # Maximum time spent decompressing a single transaction in usec
+ #decompression-time-limit: 100000
+
+ server-config:
+
+ #- apache:
+ # address: [192.168.1.0/24, 127.0.0.0/8, "::1"]
+ # personality: Apache_2
+ # # Can be specified in kb, mb, gb. Just a number indicates
+ # # it's in bytes.
+ # request-body-limit: 4096
+ # response-body-limit: 4096
+ # double-decode-path: no
+ # double-decode-query: no
+
+ #- iis7:
+ # address:
+ # - 192.168.0.0/24
+ # - 192.168.10.0/24
+ # personality: IIS_7_0
+ # # Can be specified in kb, mb, gb. Just a number indicates
+ # # it's in bytes.
+ # request-body-limit: 4096
+ # response-body-limit: 4096
+ # double-decode-path: no
+ # double-decode-query: no
+
+ # Note: Modbus probe parser is minimalist due to the limited usage in the field.
+ # Only Modbus message length (greater than Modbus header length)
+ # and protocol ID (equal to 0) are checked in probing parser
+ # It is important to enable detection port and define Modbus port
+ # to avoid false positives
+ modbus:
+ # How many unanswered Modbus requests are considered a flood.
+ # If the limit is reached, the app-layer-event:modbus.flooded; will match.
+ #request-flood: 500
+
+ enabled: no
+ detection-ports:
+ dp: 502
+ # According to MODBUS Messaging on TCP/IP Implementation Guide V1.0b, it
+ # is recommended to keep the TCP connection opened with a remote device
+ # and not to open and close it for each MODBUS/TCP transaction. In that
+ # case, it is important to set the depth of the stream reassembling as
+ # unlimited (stream.reassembly.depth: 0)
+
+ # Stream reassembly size for modbus. By default track it completely.
+ stream-depth: 0
+
+ # DNP3
+ dnp3:
+ enabled: no
+ detection-ports:
+ dp: 20000
+
+ # SCADA EtherNet/IP and CIP protocol support
+ enip:
+ enabled: no
+ detection-ports:
+ dp: 44818
+ sp: 44818
+
+ ntp:
+ enabled: yes
+
+ dhcp:
+ enabled: yes
+
+ sip:
+ enabled: yes
+
+# Limit for the maximum number of asn1 frames to decode (default 256)
+asn1-max-frames: 256
+
+# Datasets default settings
+# datasets:
+# # Default fallback memcap and hashsize values for datasets in case these
+# # were not explicitly defined.
+# defaults:
+# memcap: 100mb
+# hashsize: 2048
+
+##############################################################################
+##
+## Advanced settings below
+##
+##############################################################################
+
+##
+## Run Options
+##
+
+# Run Suricata with a specific user-id and group-id:
+#run-as:
+# user: suri
+# group: suri
+
+# Some logging modules will use that name in event as identifier. The default
+# value is the hostname
+#sensor-name: suricata
+
+# Default location of the pid file. The pid file is only used in
+# daemon mode (start Suricata with -D). If not running in daemon mode
+# the --pidfile command line option must be used to create a pid file.
+#pid-file: /var/run/suricata.pid
+
+# Daemon working directory
+# Suricata will change directory to this one if provided
+# Default: "/"
+#daemon-directory: "/"
+
+# Umask.
+# Suricata will use this umask if it is provided. By default it will use the
+# umask passed on by the shell.
+#umask: 022
+
+# Suricata core dump configuration. Limits the size of the core dump file to
+# approximately max-dump. The actual core dump size will be a multiple of the
+# page size. Core dumps that would be larger than max-dump are truncated. On
+# Linux, the actual core dump size may be a few pages larger than max-dump.
+# Setting max-dump to 0 disables core dumping.
+# Setting max-dump to 'unlimited' will give the full core dump file.
+# On 32-bit Linux, a max-dump value >= ULONG_MAX may cause the core dump size
+# to be 'unlimited'.
+
+coredump:
+ max-dump: unlimited
+
+# If the Suricata box is a router for the sniffed networks, set it to 'router'. If
+# it is a pure sniffing setup, set it to 'sniffer-only'.
+# If set to auto, the variable is internally switched to 'router' in IPS mode
+# and 'sniffer-only' in IDS mode.
+# This feature is currently only used by the reject* keywords.
+host-mode: auto
+
+# Number of packets preallocated per thread. The default is 1024. A higher number
+# will make sure each CPU will be more easily kept busy, but may negatively
+# impact caching.
+#max-pending-packets: 1024
+
+# Runmode the engine should use. Please check --list-runmodes to get the available
+# runmodes for each packet acquisition method. Default depends on selected capture
+# method. 'workers' generally gives best performance.
+#runmode: autofp
+
+# Specifies the kind of flow load balancer used by the flow pinned autofp mode.
+#
+# Supported schedulers are:
+#
+# hash - Flow assigned to threads using the 5-7 tuple hash.
+# ippair - Flow assigned to threads using addresses only.
+#
+#autofp-scheduler: hash
+
+# Preallocated size for each packet. Default is 1514 which is the classical
+# size for pcap on Ethernet. You should adjust this value to the highest
+# packet size (MTU + hardware header) on your system.
+#default-packet-size: 1514
+
+# Unix command socket that can be used to pass commands to Suricata.
+# An external tool can then connect to get information from Suricata
+# or trigger some modifications of the engine. Set enabled to yes
+# to activate the feature. In auto mode, the feature will only be
+# activated in live capture mode. You can use the filename variable to set
+# the file name of the socket.
+unix-command:
+ enabled: yes
+ filename: /run/suricata/suricata.socket
+
+# Magic file. The extension .mgc is added to the value here.
+#magic-file: /usr/share/file/magic
+#magic-file:
+
+# GeoIP2 database file. Specify path and filename of GeoIP2 database
+# if using rules with "geoip" rule option.
+#geoip-database: /usr/local/share/GeoLite2/GeoLite2-Country.mmdb
+
+legacy:
+ uricontent: enabled
+
+##
+## Detection settings
+##
+
+# Set the order of alerts based on actions
+# The default order is pass, drop, reject, alert
+# action-order:
+# - pass
+# - drop
+# - reject
+# - alert
+
+# Define maximum number of possible alerts that can be triggered for the same
+# packet. Default is 15
+#packet-alert-max: 15
+
+# IP Reputation
+#reputation-categories-file: /etc/suricata/iprep/categories.txt
+#default-reputation-path: /etc/suricata/iprep
+#reputation-files:
+# - reputation.list
+
+# When run with the option --engine-analysis, the engine will read each of
+# the parameters below, and print reports for each of the enabled sections
+# and exit. The reports are printed to a file in the default log dir
+# given by the parameter "default-log-dir", with engine reporting
+# subsection below printing reports in its own report file.
+engine-analysis:
+ # enables printing reports for fast-pattern for every rule.
+ rules-fast-pattern: yes
+ # enables printing reports for each rule
+ rules: yes
+
+#recursion and match limits for PCRE where supported
+pcre:
+ match-limit: 3500
+ match-limit-recursion: 1500
+
+##
+## Advanced Traffic Tracking and Reconstruction Settings
+##
+
+# Host specific policies for defragmentation and TCP stream
+# reassembly. The host OS lookup is done using a radix tree, just
+# like a routing table so the most specific entry matches.
+host-os-policy:
+ # Make the default policy windows.
+ windows: [0.0.0.0/0]
+ bsd: []
+ bsd-right: []
+ old-linux: []
+ linux: []
+ old-solaris: []
+ solaris: []
+ hpux10: []
+ hpux11: []
+ irix: []
+ macos: []
+ vista: []
+ windows2k3: []
+
+# Defrag settings:
+
+# The memcap-policy value can be "drop-flow", "pass-flow", "bypass",
+# "drop-packet", "pass-packet", "reject" or "ignore" (which is the default).
+defrag:
+ memcap: 32mb
+ # memcap-policy: ignore
+ hash-size: 65536
+ trackers: 65535 # number of defragmented flows to follow
+ max-frags: 65535 # number of fragments to keep (higher than trackers)
+ prealloc: yes
+ timeout: 60
+
+# Enable defrag per host settings
+# host-config:
+#
+# - dmz:
+# timeout: 30
+# address: [192.168.1.0/24, 127.0.0.0/8, 1.1.1.0/24, 2.2.2.0/24, "1.1.1.1", "2.2.2.2", "::1"]
+#
+# - lan:
+# timeout: 45
+# address:
+# - 192.168.0.0/24
+# - 192.168.10.0/24
+# - 172.16.14.0/24
+
+# Flow settings:
+# By default, the reserved memory (memcap) for flows is 32MB. This is the limit
+# for flow allocation inside the engine. You can change this value to allow
+# more memory usage for flows.
+# The hash-size determines the size of the hash used to identify flows inside
+# the engine, and by default the value is 65536.
+# At startup, the engine can preallocate a number of flows, to get better
+# performance. The number of flows preallocated is 10000 by default.
+# emergency-recovery is the percentage of flows that the engine needs to
+# prune before clearing the emergency state. The emergency state is activated
+# when the memcap limit is reached, allowing new flows to be created, but
+# pruning them with the emergency timeouts (they are defined below).
+# If the memcap is reached, the engine will try to prune flows
+# with the default timeouts. If it doesn't find a flow to prune, it will set
+# the emergency bit and it will try again with more aggressive timeouts.
+# If that doesn't work, then it will try to kill the oldest flows using
+# last time seen flows.
+# The memcap can be specified in kb, mb, gb. Just a number indicates it's
+# in bytes.
+# The memcap-policy can be "drop-flow", "pass-flow", "bypass", "drop-packet",
+# "pass-packet", "reject" or "ignore" (which is the default).
+
+flow:
+ memcap: 128mb
+ #memcap-policy: ignore
+ hash-size: 65536
+ prealloc: 10000
+ emergency-recovery: 30
+ #managers: 1 # default to one flow manager
+ #recyclers: 1 # default to one flow recycler thread
+
+# This option controls the use of VLAN ids in the flow (and defrag)
+# hashing. Normally this should be enabled, but in some (broken)
+# setups where both sides of a flow are not tagged with the same VLAN
+# tag, we can ignore the VLAN id's in the flow hashing.
+vlan:
+ use-for-tracking: true
+
+# Specific timeouts for flows. Here you can specify the timeouts that the
+# active flows will wait to transit from the current state to another, on each
+# protocol. The value of "new" determines the seconds to wait after a handshake or
+# stream startup before the engine frees the data of that flow it doesn't
+# change the state to established (usually if we don't receive more packets
+# of that flow). The value of "established" is the amount of
+# seconds that the engine will wait to free the flow if that time elapses
+# without receiving new packets or closing the connection. "closed" is the
+# amount of time to wait after a flow is closed (usually zero). "bypassed"
+# timeout controls locally bypassed flows. For these flows we don't do any other
+# tracking. If no packets have been seen after this timeout, the flow is discarded.
+#
+# There's an emergency mode that will become active under attack circumstances,
+# making the engine to check flow status faster. This configuration variables
+# use the prefix "emergency-" and work similar as the normal ones.
+# Some timeouts doesn't apply to all the protocols, like "closed", for udp and
+# icmp.
+
+flow-timeouts:
+
+ default:
+ new: 30
+ established: 300
+ closed: 0
+ bypassed: 100
+ emergency-new: 10
+ emergency-established: 100
+ emergency-closed: 0
+ emergency-bypassed: 50
+ tcp:
+ new: 60
+ established: 600
+ closed: 60
+ bypassed: 100
+ emergency-new: 5
+ emergency-established: 100
+ emergency-closed: 10
+ emergency-bypassed: 50
+ udp:
+ new: 30
+ established: 300
+ bypassed: 100
+ emergency-new: 10
+ emergency-established: 100
+ emergency-bypassed: 50
+ icmp:
+ new: 30
+ established: 300
+ bypassed: 100
+ emergency-new: 10
+ emergency-established: 100
+ emergency-bypassed: 50
+
+# Stream engine settings. Here the TCP stream tracking and reassembly
+# engine is configured.
+#
+# stream:
+# memcap: 64mb # Can be specified in kb, mb, gb. Just a
+# # number indicates it's in bytes.
+# memcap-policy: ignore # Can be "drop-flow", "pass-flow", "bypass",
+# # "drop-packet", "pass-packet", "reject" or
+# # "ignore" default is "ignore"
+# checksum-validation: yes # To validate the checksum of received
+# # packet. If csum validation is specified as
+# # "yes", then packets with invalid csum values will not
+# # be processed by the engine stream/app layer.
+# # Warning: locally generated traffic can be
+# # generated without checksum due to hardware offload
+# # of checksum. You can control the handling of checksum
+# # on a per-interface basis via the 'checksum-checks'
+# # option
+# prealloc-sessions: 2k # 2k sessions prealloc'd per stream thread
+# midstream: false # don't allow midstream session pickups
+# midstream-policy: ignore # Can be "drop-flow", "pass-flow", "bypass",
+# # "drop-packet", "pass-packet", "reject" or
+# # "ignore" default is "ignore"
+# async-oneside: false # don't enable async stream handling
+# inline: no # stream inline mode
+# drop-invalid: yes # in inline mode, drop packets that are invalid with regards to streaming engine
+# max-synack-queued: 5 # Max different SYN/ACKs to queue
+# bypass: no # Bypass packets when stream.reassembly.depth is reached.
+# # Warning: first side to reach this triggers
+# # the bypass.
+#
+# reassembly:
+# memcap: 256mb # Can be specified in kb, mb, gb. Just a number
+# # indicates it's in bytes.
+# memcap-policy: ignore # Can be "drop-flow", "pass-flow", "bypass",
+# # "drop-packet", "pass-packet", "reject" or
+# # "ignore" default is "ignore"
+# depth: 1mb # Can be specified in kb, mb, gb. Just a number
+# # indicates it's in bytes.
+# toserver-chunk-size: 2560 # inspect raw stream in chunks of at least
+# # this size. Can be specified in kb, mb,
+# # gb. Just a number indicates it's in bytes.
+# toclient-chunk-size: 2560 # inspect raw stream in chunks of at least
+# # this size. Can be specified in kb, mb,
+# # gb. Just a number indicates it's in bytes.
+# randomize-chunk-size: yes # Take a random value for chunk size around the specified value.
+# # This lowers the risk of some evasion techniques but could lead
+# # to detection change between runs. It is set to 'yes' by default.
+# randomize-chunk-range: 10 # If randomize-chunk-size is active, the value of chunk-size is
+# # a random value between (1 - randomize-chunk-range/100)*toserver-chunk-size
+# # and (1 + randomize-chunk-range/100)*toserver-chunk-size and the same
+# # calculation for toclient-chunk-size.
+# # Default value of randomize-chunk-range is 10.
+#
+# raw: yes # 'Raw' reassembly enabled or disabled.
+# # raw is for content inspection by detection
+# # engine.
+#
+# segment-prealloc: 2048 # number of segments preallocated per thread
+#
+# check-overlap-different-data: true|false
+# # check if a segment contains different data
+# # than what we've already seen for that
+# # position in the stream.
+# # This is enabled automatically if inline mode
+# # is used or when stream-event:reassembly_overlap_different_data;
+# # is used in a rule.
+#
+stream:
+ memcap: 64mb
+ #memcap-policy: ignore
+ checksum-validation: yes # reject incorrect csums
+ #midstream: false
+ #midstream-policy: ignore
+ inline: auto # auto will use inline mode in IPS mode, yes or no set it statically
+ reassembly:
+ memcap: 256mb
+ #memcap-policy: ignore
+ depth: 1mb # reassemble 1mb into a stream
+ toserver-chunk-size: 2560
+ toclient-chunk-size: 2560
+ randomize-chunk-size: yes
+ #randomize-chunk-range: 10
+ #raw: yes
+ #segment-prealloc: 2048
+ #check-overlap-different-data: true
+
+# Host table:
+#
+# Host table is used by the tagging and per host thresholding subsystems.
+#
+host:
+ hash-size: 4096
+ prealloc: 1000
+ memcap: 32mb
+
+# IP Pair table:
+#
+# Used by xbits 'ippair' tracking.
+#
+#ippair:
+# hash-size: 4096
+# prealloc: 1000
+# memcap: 32mb
+
+# Decoder settings
+
+decoder:
+ # Teredo decoder is known to not be completely accurate
+ # as it will sometimes detect non-teredo as teredo.
+ teredo:
+ enabled: true
+ # ports to look for Teredo. Max 4 ports. If no ports are given, or
+ # the value is set to 'any', Teredo detection runs on _all_ UDP packets.
+ ports: $TEREDO_PORTS # syntax: '[3544, 1234]' or '3533' or 'any'.
+
+ # VXLAN decoder is assigned to up to 4 UDP ports. By default only the
+ # IANA assigned port 4789 is enabled.
+ vxlan:
+ enabled: true
+ ports: $VXLAN_PORTS # syntax: '[8472, 4789]' or '4789'.
+
+ # VNTag decode support
+ vntag:
+ enabled: false
+
+ # Geneve decoder is assigned to up to 4 UDP ports. By default only the
+ # IANA assigned port 6081 is enabled.
+ geneve:
+ enabled: true
+ ports: $GENEVE_PORTS # syntax: '[6081, 1234]' or '6081'.
+
+ # maximum number of decoder layers for a packet
+ # max-layers: 16
+
+##
+## Performance tuning and profiling
+##
+
+# The detection engine builds internal groups of signatures. The engine
+# allows us to specify the profile to use for them, to manage memory in an
+# efficient way keeping good performance. For the profile keyword you
+# can use the words "low", "medium", "high" or "custom". If you use custom,
+# make sure to define the values in the "custom-values" section.
+# Usually you would prefer medium/high/low.
+#
+# "sgh mpm-context", indicates how the staging should allot mpm contexts for
+# the signature groups. "single" indicates the use of a single context for
+# all the signature group heads. "full" indicates a mpm-context for each
+# group head. "auto" lets the engine decide the distribution of contexts
+# based on the information the engine gathers on the patterns from each
+# group head.
+#
+# The option inspection-recursion-limit is used to limit the recursive calls
+# in the content inspection code. For certain payload-sig combinations, we
+# might end up taking too much time in the content inspection code.
+# If the argument specified is 0, the engine uses an internally defined
+# default limit. When a value is not specified, there are no limits on the recursion.
+detect:
+ profile: medium
+ custom-values:
+ toclient-groups: 3
+ toserver-groups: 25
+ sgh-mpm-context: auto
+ inspection-recursion-limit: 3000
+ # If set to yes, the loading of signatures will be made after the capture
+ # is started. This will limit the downtime in IPS mode.
+ #delayed-detect: yes
+
+ prefilter:
+ # default prefiltering setting. "mpm" only creates MPM/fast_pattern
+ # engines. "auto" also sets up prefilter engines for other keywords.
+ # Use --list-keywords=all to see which keywords support prefiltering.
+ default: mpm
+
+ # the grouping values above control how many groups are created per
+ # direction. Port whitelisting forces that port to get its own group.
+ # Very common ports will benefit, as well as ports with many expensive
+ # rules.
+ grouping:
+ #tcp-whitelist: 53, 80, 139, 443, 445, 1433, 3306, 3389, 6666, 6667, 8080
+ #udp-whitelist: 53, 135, 5060
+
+ profiling:
+ # Log the rules that made it past the prefilter stage, per packet
+ # default is off. The threshold setting determines how many rules
+ # must have made it past pre-filter for that rule to trigger the
+ # logging.
+ #inspect-logging-threshold: 200
+ grouping:
+ dump-to-disk: false
+ include-rules: false # very verbose
+ include-mpm-stats: false
+
+# Select the multi pattern algorithm you want to run for scan/search the
+# in the engine.
+#
+# The supported algorithms are:
+# "ac" - Aho-Corasick, default implementation
+# "ac-bs" - Aho-Corasick, reduced memory implementation
+# "ac-ks" - Aho-Corasick, "Ken Steele" variant
+# "hs" - Hyperscan, available when built with Hyperscan support
+#
+# The default mpm-algo value of "auto" will use "hs" if Hyperscan is
+# available, "ac" otherwise.
+#
+# The mpm you choose also decides the distribution of mpm contexts for
+# signature groups, specified by the conf - "detect.sgh-mpm-context".
+# Selecting "ac" as the mpm would require "detect.sgh-mpm-context"
+# to be set to "single", because of ac's memory requirements, unless the
+# ruleset is small enough to fit in memory, in which case one can
+# use "full" with "ac". The rest of the mpms can be run in "full" mode.
+
+mpm-algo: auto
+
+# Select the matching algorithm you want to use for single-pattern searches.
+#
+# Supported algorithms are "bm" (Boyer-Moore) and "hs" (Hyperscan, only
+# available if Suricata has been built with Hyperscan support).
+#
+# The default of "auto" will use "hs" if available, otherwise "bm".
+
+spm-algo: auto
+
+# Suricata is multi-threaded. Here the threading can be influenced.
+threading:
+ set-cpu-affinity: no
+ # Tune cpu affinity of threads. Each family of threads can be bound
+ # to specific CPUs.
+ #
+ # These 2 apply to the all runmodes:
+ # management-cpu-set is used for flow timeout handling, counters
+ # worker-cpu-set is used for 'worker' threads
+ #
+ # Additionally, for autofp these apply:
+ # receive-cpu-set is used for capture threads
+ # verdict-cpu-set is used for IPS verdict threads
+ #
+ cpu-affinity:
+ - management-cpu-set:
+ cpu: [ 0 ] # include only these CPUs in affinity settings
+ - receive-cpu-set:
+ cpu: [ 0 ] # include only these CPUs in affinity settings
+ - worker-cpu-set:
+ cpu: [ "all" ]
+ mode: "exclusive"
+ # Use explicitly 3 threads and don't compute number by using
+ # detect-thread-ratio variable:
+ # threads: 3
+ prio:
+ low: [ 0 ]
+ medium: [ "1-2" ]
+ high: [ 3 ]
+ default: "medium"
+ #- verdict-cpu-set:
+ # cpu: [ 0 ]
+ # prio:
+ # default: "high"
+ #
+ # By default Suricata creates one "detect" thread per available CPU/CPU core.
+ # This setting allows controlling this behaviour. A ratio setting of 2 will
+ # create 2 detect threads for each CPU/CPU core. So for a dual core CPU this
+ # will result in 4 detect threads. If values below 1 are used, less threads
+ # are created. So on a dual core CPU a setting of 0.5 results in 1 detect
+ # thread being created. Regardless of the setting at a minimum 1 detect
+ # thread will always be created.
+ #
+ detect-thread-ratio: 1.0
+ #
+ # By default, the per-thread stack size is left to its default setting. If
+ # the default thread stack size is too small, use the following configuration
+ # setting to change the size. Note that if any thread's stack size cannot be
+ # set to this value, a fatal error occurs.
+ #
+ # Generally, the per-thread stack-size should not exceed 8MB.
+ #stack-size: 8mb
+
+# Luajit has a strange memory requirement, its 'states' need to be in the
+# first 2G of the process' memory.
+#
+# 'luajit.states' is used to control how many states are preallocated.
+# State use: per detect script: 1 per detect thread. Per output script: 1 per
+# script.
+luajit:
+ states: 128
+
+# Profiling settings. Only effective if Suricata has been built with
+# the --enable-profiling configure flag.
+#
+profiling:
+ # Run profiling for every X-th packet. The default is 1, which means we
+ # profile every packet. If set to 1000, one packet is profiled for every
+ # 1000 received.
+ #sample-rate: 1000
+
+ # rule profiling
+ rules:
+
+ # Profiling can be disabled here, but it will still have a
+ # performance impact if compiled in.
+ enabled: yes
+ filename: rule_perf.log
+ append: yes
+
+ # Sort options: ticks, avgticks, checks, matches, maxticks
+ # If commented out all the sort options will be used.
+ #sort: avgticks
+
+ # Limit the number of sids for which stats are shown at exit (per sort).
+ limit: 10
+
+ # output to json
+ json: yes
+
+ # per keyword profiling
+ keywords:
+ enabled: yes
+ filename: keyword_perf.log
+ append: yes
+
+ prefilter:
+ enabled: yes
+ filename: prefilter_perf.log
+ append: yes
+
+ # per rulegroup profiling
+ rulegroups:
+ enabled: yes
+ filename: rule_group_perf.log
+ append: yes
+
+ # packet profiling
+ packets:
+
+ # Profiling can be disabled here, but it will still have a
+ # performance impact if compiled in.
+ enabled: yes
+ filename: packet_stats.log
+ append: yes
+
+ # per packet csv output
+ csv:
+
+ # Output can be disabled here, but it will still have a
+ # performance impact if compiled in.
+ enabled: no
+ filename: packet_stats.csv
+
+ # profiling of locking. Only available when Suricata was built with
+ # --enable-profiling-locks.
+ locks:
+ enabled: no
+ filename: lock_stats.log
+ append: yes
+
+ pcap-log:
+ enabled: no
+ filename: pcaplog_stats.log
+ append: yes
+
+##
+## Netfilter integration
+##
+
+# When running in NFQ inline mode, it is possible to use a simulated
+# non-terminal NFQUEUE verdict.
+# This permits sending all needed packet to Suricata via this rule:
+# iptables -I FORWARD -m mark ! --mark $MARK/$MASK -j NFQUEUE
+# And below, you can have your standard filtering ruleset. To activate
+# this mode, you need to set mode to 'repeat'
+# If you want a packet to be sent to another queue after an ACCEPT decision
+# set the mode to 'route' and set next-queue value.
+# On Linux >= 3.1, you can set batchcount to a value > 1 to improve performance
+# by processing several packets before sending a verdict (worker runmode only).
+# On Linux >= 3.6, you can set the fail-open option to yes to have the kernel
+# accept the packet if Suricata is not able to keep pace.
+# bypass mark and mask can be used to implement NFQ bypass. If bypass mark is
+# set then the NFQ bypass is activated. Suricata will set the bypass mark/mask
+# on packet of a flow that need to be bypassed. The Nefilter ruleset has to
+# directly accept all packets of a flow once a packet has been marked.
+nfq:
+# mode: accept
+# repeat-mark: 1
+# repeat-mask: 1
+# bypass-mark: 1
+# bypass-mask: 1
+# route-queue: 2
+# batchcount: 20
+# fail-open: yes
+
+#nflog support
+nflog:
+ # netlink multicast group
+ # (the same as the iptables --nflog-group param)
+ # Group 0 is used by the kernel, so you can't use it
+ - group: 2
+ # netlink buffer size
+ buffer-size: 18432
+ # put default value here
+ - group: default
+ # set number of packets to queue inside kernel
+ qthreshold: 1
+ # set the delay before flushing packet in the kernel's queue
+ qtimeout: 100
+ # netlink max buffer size
+ max-size: 20000
+
+##
+## Advanced Capture Options
+##
+
+# General settings affecting packet capture
+capture:
+ # disable NIC offloading. It's restored when Suricata exits.
+ # Enabled by default.
+ #disable-offloading: false
+ #
+ # disable checksum validation. Same as setting '-k none' on the
+ # commandline.
+ #checksum-validation: none
+
+# Netmap support
+#
+# Netmap operates with NIC directly in driver, so you need FreeBSD 11+ which has
+# built-in Netmap support or compile and install the Netmap module and appropriate
+# NIC driver for your Linux system.
+# To reach maximum throughput disable all receive-, segmentation-,
+# checksum- offloading on your NIC (using ethtool or similar).
+# Disabling TX checksum offloading is *required* for connecting OS endpoint
+# with NIC endpoint.
+# You can find more information at https://github.com/luigirizzo/netmap
+#
+netmap:
+ - interface: default
+
+# PF_RING configuration: for use with native PF_RING support
+# for more info see http://www.ntop.org/products/pf_ring/
+pfring:
+ - interface: default
+ #threads: 2
+
+# For FreeBSD ipfw(8) divert(4) support.
+# Please make sure you have ipfw_load="YES" and ipdivert_load="YES"
+# in /etc/loader.conf or kldload'ing the appropriate kernel modules.
+# Additionally, you need to have an ipfw rule for the engine to see
+# the packets from ipfw. For Example:
+#
+# ipfw add 100 divert 8000 ip from any to any
+#
+# N.B. This example uses "8000" -- this number must mach the values
+# you passed on the command line, i.e., -d 8000
+#
+ipfw:
+
+ # Reinject packets at the specified ipfw rule number. This config
+ # option is the ipfw rule number AT WHICH rule processing continues
+ # in the ipfw processing system after the engine has finished
+ # inspecting the packet for acceptance. If no rule number is specified,
+ # accepted packets are reinjected at the divert rule which they entered
+ # and IPFW rule processing continues. No check is done to verify
+ # this will rule makes sense so care must be taken to avoid loops in ipfw.
+ #
+ ## The following example tells the engine to reinject packets
+ # back into the ipfw firewall AT rule number 5500:
+ #
+ # ipfw-reinjection-rule-number: 5500
+
+
+napatech:
+ # When use_all_streams is set to "yes" the initialization code will query
+ # the Napatech service for all configured streams and listen on all of them.
+ # When set to "no" the streams config array will be used.
+ #
+ # This option necessitates running the appropriate NTPL commands to create
+ # the desired streams prior to running Suricata.
+ #use-all-streams: no
+
+ # The streams to listen on when auto-config is disabled or when and threading
+ # cpu-affinity is disabled. This can be either:
+ # an individual stream (e.g. streams: [0])
+ # or
+ # a range of streams (e.g. streams: ["0-3"])
+ #
+ streams: ["0-3"]
+
+ # Stream stats can be enabled to provide fine grain packet and byte counters
+ # for each thread/stream that is configured.
+ #
+ enable-stream-stats: no
+
+ # When auto-config is enabled the streams will be created and assigned
+ # automatically to the NUMA node where the thread resides. If cpu-affinity
+ # is enabled in the threading section. Then the streams will be created
+ # according to the number of worker threads specified in the worker-cpu-set.
+ # Otherwise, the streams array is used to define the streams.
+ #
+ # This option is intended primarily to support legacy configurations.
+ #
+ # This option cannot be used simultaneously with either "use-all-streams"
+ # or "hardware-bypass".
+ #
+ auto-config: yes
+
+ # Enable hardware level flow bypass.
+ #
+ hardware-bypass: yes
+
+ # Enable inline operation. When enabled traffic arriving on a given port is
+ # automatically forwarded out its peer port after analysis by Suricata.
+ #
+ inline: no
+
+ # Ports indicates which Napatech ports are to be used in auto-config mode.
+ # these are the port IDs of the ports that will be merged prior to the
+ # traffic being distributed to the streams.
+ #
+ # When hardware-bypass is enabled the ports must be configured as a segment.
+ # specify the port(s) on which upstream and downstream traffic will arrive.
+ # This information is necessary for the hardware to properly process flows.
+ #
+ # When using a tap configuration one of the ports will receive inbound traffic
+ # for the network and the other will receive outbound traffic. The two ports on a
+ # given segment must reside on the same network adapter.
+ #
+ # When using a SPAN-port configuration the upstream and downstream traffic
+ # arrives on a single port. This is configured by setting the two sides of the
+ # segment to reference the same port. (e.g. 0-0 to configure a SPAN port on
+ # port 0).
+ #
+ # port segments are specified in the form:
+ # ports: [0-1,2-3,4-5,6-6,7-7]
+ #
+ # For legacy systems when hardware-bypass is disabled this can be specified in any
+ # of the following ways:
+ #
+ # a list of individual ports (e.g. ports: [0,1,2,3])
+ #
+ # a range of ports (e.g. ports: [0-3])
+ #
+ # "all" to indicate that all ports are to be merged together
+ # (e.g. ports: [all])
+ #
+ # This parameter has no effect if auto-config is disabled.
+ #
+ ports: [0-1,2-3]
+
+ # When auto-config is enabled the hashmode specifies the algorithm for
+ # determining to which stream a given packet is to be delivered.
+ # This can be any valid Napatech NTPL hashmode command.
+ #
+ # The most common hashmode commands are: hash2tuple, hash2tuplesorted,
+ # hash5tuple, hash5tuplesorted and roundrobin.
+ #
+ # See Napatech NTPL documentation other hashmodes and details on their use.
+ #
+ # This parameter has no effect if auto-config is disabled.
+ #
+ hashmode: hash5tuplesorted
+
+##
+## Configure Suricata to load Suricata-Update managed rules.
+##
+
+# As VyOS leverages suricata-update, the default rule path points to the
+# generated rules instead of the built-in rules.
+#
+# default-rule-path: /etc/suricata/rules
+default-rule-path: /var/lib/suricata/rules
+
+rule-files:
+ - suricata.rules
+
+##
+## Auxiliary configuration files.
+##
+
+# As VyOS leverages suricata-update, the classification file points to the
+# generated classification instead of the built-in one.
+#
+# classification-file: /etc/suricata/classification.config
+classification-file: /var/lib/suricata/rules/classification.config
+reference-config-file: /etc/suricata/reference.config
+# threshold-file: /etc/suricata/threshold.config
+
+##
+## Include other configs
+##
+
+# Includes: Files included here will be handled as if they were in-lined
+# in this configuration file. Files with relative pathnames will be
+# searched for in the same directory as this configuration file. You may
+# use absolute pathnames too.
+# You can specify more than 2 configuration files, if needed.
+#include: include1.yaml
+#include: include2.yaml
diff --git a/data/templates/ids/suricata_logrotate.j2 b/data/templates/ids/suricata_logrotate.j2
new file mode 100644
index 000000000..62773fc68
--- /dev/null
+++ b/data/templates/ids/suricata_logrotate.j2
@@ -0,0 +1,17 @@
+{% for filename in [(log.eve.filename | default("eve.json"))] %}
+{{ filename if filename.startswith("/") else ("/var/log/suricata/" + filename) }}
+{% endfor %}{
+ weekly
+ dateext
+ dateformat _%Y-%m-%d_%H-%M-%S
+ maxsize 10M
+ rotate 10
+ missingok
+ nocompress
+ nocreate
+ nomail
+ sharedscripts
+ postrotate
+ /bin/kill -HUP `cat /run/suricata/suricata.pid 2>/dev/null` 2>/dev/null || true
+ endscript
+}
diff --git a/data/templates/ipsec/ios_profile.j2 b/data/templates/ipsec/ios_profile.j2
index eb74924b8..a9ae1c7a9 100644
--- a/data/templates/ipsec/ios_profile.j2
+++ b/data/templates/ipsec/ios_profile.j2
@@ -83,12 +83,15 @@
</dict>
</dict>
</dict>
+{% if certs is vyos_defined %}
<!-- This payload is optional but it provides an easy way to install the CA certificate together with the configuration -->
+{% for cert in certs %}
+ <!-- Payload for: {{ cert.ca_cn }} -->
<dict>
<key>PayloadIdentifier</key>
- <string>org.example.ca</string>
+ <string>org.{{ cert.ca_cn | lower | replace(' ', '.') | replace('_', '.') }}</string>
<key>PayloadUUID</key>
- <string>{{ '' | get_uuid }}</string>
+ <string>{{ cert.ca_cn | generate_uuid4 }}</string>
<key>PayloadType</key>
<string>com.apple.security.root</string>
<key>PayloadVersion</key>
@@ -96,9 +99,11 @@
<!-- This is the Base64 (PEM) encoded CA certificate -->
<key>PayloadContent</key>
<data>
- {{ ca_cert }}
+ {{ cert.ca_cert }}
</data>
</dict>
+{% endfor %}
+{% endif %}
</array>
</dict>
</plist>
diff --git a/data/templates/load-balancing/haproxy.cfg.j2 b/data/templates/load-balancing/haproxy.cfg.j2
index 7917c8257..c6027e09b 100644
--- a/data/templates/load-balancing/haproxy.cfg.j2
+++ b/data/templates/load-balancing/haproxy.cfg.j2
@@ -62,7 +62,7 @@ frontend {{ front }}
bind {{ address | bracketize_ipv6 }}:{{ front_config.port }} {{ ssl_directive }} {{ ssl_front | join(' ') }}
{% endfor %}
{% else %}
- bind :::{{ front_config.port }} v4v6 {{ ssl_directive }} {{ ssl_front | join(' ') }}
+ bind [::]:{{ front_config.port }} v4v6 {{ ssl_directive }} {{ ssl_front | join(' ') }}
{% endif %}
{% if front_config.redirect_http_to_https is vyos_defined %}
http-request redirect scheme https unless { ssl_fc }
@@ -81,6 +81,11 @@ frontend {{ front }}
{% endif %}
{% endfor %}
{% endif %}
+{% if front_config.http_response_headers is vyos_defined %}
+{% for header, header_config in front_config.http_response_headers.items() %}
+ http-response set-header {{ header }} '{{ header_config['value'] }}'
+{% endfor %}
+{% endif %}
{% endif %}
{% if front_config.rule is vyos_defined %}
{% for rule, rule_config in front_config.rule.items() %}
@@ -126,6 +131,13 @@ frontend {{ front }}
{% if backend is vyos_defined %}
{% for back, back_config in backend.items() %}
backend {{ back }}
+{% if back_config.health_check is vyos_defined %}
+{% if back_config.health_check == 'smtp' %}
+ option smtpchk
+{% else %}
+ option {{ back_config.health_check }}-check
+{% endif %}
+{% endif %}
{% if back_config.http_check is vyos_defined %}
option httpchk
{% endif %}
@@ -158,6 +170,11 @@ backend {{ back }}
{% endif %}
{% if back_config.mode is vyos_defined %}
mode {{ back_config.mode }}
+{% if back_config.http_response_headers is vyos_defined %}
+{% for header, header_config in back_config.http_response_headers.items() %}
+ http-response set-header {{ header }} '{{ header_config['value'] }}'
+{% endfor %}
+{% endif %}
{% endif %}
{% if back_config.rule is vyos_defined %}
{% for rule, rule_config in back_config.rule.items() %}
diff --git a/data/templates/login/default_motd.j2 b/data/templates/login/default_motd.j2
index 543c6f8e0..0d52092f8 100644
--- a/data/templates/login/default_motd.j2
+++ b/data/templates/login/default_motd.j2
@@ -4,6 +4,9 @@ Welcome to VyOS!
. VyOS {{ version_data.version }}
└ ──┘ {{ version_data.release_train }}
+{% if version_data.lts_build %}
+ * Support portal: {{ version_data.support_url }}
+{% endif %}
* Documentation: {{ version_data.documentation_url }}
* Project news: {{ version_data.project_news_url }}
* Bug reports: {{ version_data.bugtracker_url }}